Wireless Door Intercom Telephone Handset and Charger For use with CL3622 Dual Function DECT Telephone and Doorbell Intercom System
Model:
User Manua...
Muting the Microphone Adjusting Audio Volume Last Number Redial Caller ID Log (CID) Key Lock Handsfree Flash Signal Ringer Setting Selecting a Language Handset Name Auto Answer Paging Dial Mode
18 18 19 20 22 24 24 25 25 26 26 27 27
Menu Navigation Menu Map Phone Book Base Station (BS) Settings
28 29 30 33
Handset (HS) Settings Registration Calling with more than one Handset Caller ID on call waiting
35 39 40 42
Part Two: Wireless Doorbell 43
Operating Range Noise Filter
47 48
Notes
50
Important Note This kit is an accessory to the CL3622 Dual Function Telephone and Doorbell System. The Outdoor Station (doorbell/intercom) referred to throughout the manual is not included in this kit. References to the Outdoor Station are for your convenience/reference when extending the CL3622 System to include additional handsets and chargers.
Our range of Door Intercom System products include: CL3622B
-
Wireless Door Intercom Telephone and Doorbell System (dual function DECT Telephone and Door Intercom)
CL6011B
-
Wireless Door Intercom System
CL6011BCS
-
Wireless Door Intercom Charging Dock Station (accessory to the CL6011 system)
CL3660UM
-
Door Entry System Unlock Module (compatible with CL3622 and CL6011 systems)
CLOSPSU
-
Unlock Module/Outdoor Station Power Supply Unit
Once you have unpacked your Indoor Charging Base, make sure that all parts shown below are available, if any parts are missing or broken, please contact your supplier immediately.
1. Connect the end of the AC Power Adapter to the power socket of the Base Station, then plug the AC Adapter into a standard mains socket.
Outdoor Station
Power Supply Output: +12V
PLEASE NOTE
The optional unlock module must be installed by a competent installer. Care should be taken to correctly connect the polarity when using the optional 12V (max) power supply. The unlock module operates a contact with a maximum rating of 240V 10A, which can be used for automatic locks, switching on lighting etc. This must be installed by a fully qualified electrician. Please note: When using an external power supply unit to power the outdoor station, the batteries inside the outdoor station must be removed before connecting the power supply.
12VDC
GND
Power PGND CTRL SGND
Unlock Module
Relay Switch (10A max)
Part One: Cordless Handset
Part Two: Wireless Outdoor Station
DECT Telephone • 1.88 GHz DECT technology with GAP
• Call duration display
• The system can be extended by a further 3 Handset
• Real time clock (set time)
• Phonebook with up to 50 entries
• 13 languages selectable
• 9 VIP ring tones setting for phonebook entries
• Auto answer ON/OFF selectable
• Redial book with up to 10 entries • 10 ring tones and 6 volume levels (5 levels + off) • Key tone ON/OFF selectable • Full handsfree speakerphone • Internal call
• Keypad lock
• Alarm clock includes snooze option • Handset Name setting • LCD backlight
Caller ID • FSK and DTMF dual system Caller ID
• Call transfer
• Caller ID/Call Waiting
• 3 way conference call
• Caller ID list with up to 40 entries
• Receiver/Speaker volume adjustment (5 levels)
• Incoming calls can be called back/added to phonebook/deleted
• PIN protection • Predialling
Outdoor Station
• Redial, Flash, Pause, Mute
• 2 way communication with Telephone Handset
• TONE/PULSE dialling mode selectable
• No wiring required, battery operated
• FLASH time selectable
• Mains power option (power supply available separately, code: CLOSPSU)
• Optional Unlock Module activation
Operating range measured in open field conditions, walls, ceilings and metal structures will reduce the maximum range.