Digital Wireless Intercom System
Standard System
The Digital Wireless Intercom System is an intercom system for broadcasting, theater, hall, and industry, which utilizes the basic technique of the personal handy phone (PHS), developed as a digital mobile communication technique of the “second generation” cordless telephone system. The coexistence of the simple operability that has most preferentially taken into consideration the basic functions as a wireless intercom and the reliability as professional equipment that has sought the ultimate in what is required therefor based on the achievements cultivated in developing the analog wireless intercom. Further, the radio communication device has fully incorporated the characteristics, such as clear sound quality inherent in digital communication, use of abundant and stable channels, excellent extendibility, etc.
1 System example
0ERFORMERANTEROOMAREA
3TUDIOFLOOR
Production group
Audio group
2 System features ƷƷ ƷƷ
Radio station license is not required Communication of higher quality than analog system Quick connection Use of optional CS control unit (for long distance) enables extended connection between master unit and slave unit up to 800 m (standard: 150 m) When the recommended cable [L-4E5C] is used
48
Production group
3 System standards 1) Used frequency: 1900 MHz band, 35 waves 2) Communication system: Multi-carrier TDMA-TDD system 3) Antenna power: 10 mW or less 4) Multiplicity: 4 5) Frequency switching: Synthesizer system by quartz control 6) Separation: 300 kHz (600 kHz separation in the same area) 7) Channel switching: MCA (by CS selection) 8) Audio encoding system: 32 kbit/s ADPCM 9) Transmission rate: 384 kbit/s 10) Technical standard conformance: Conformity-certificated product 11) Radio station license: Not required
Digital Wireless Intercom System (BS) YFF-1870
Specifications
• Easily connected to wired intercom (2W/4W2 system) • Connected to public telephone line • PGM input • Independent use enabled using microphone/speaker • Status display by LCD • Up to 4 CS units can be connected (Up to 16 CS units can be connected by the optional setting) • Rack-mount type EIA=2U, JIS=2J
HYB1
HYB2
DU−7124
DU−7124
CS D
CS C
CSB
CSA
Test originating/ receiving jack
MADEINJAPAN
100-120V 250V/1.5A 220-240V 250V/1A
DU−7125
4W
4W
PUSH
PUSH
DU−7127
OUT
OUT
DU−7123
DU−7123
DU−7123
DU−7123
OUT PUSH
TEL
PUSH
2
PUSH
DU−7126
感電に注意 ELECTRIC SHOCK
PUSH
FUSE
PUSH
AC100-240V 50/60Hz AC100V 150VA AC240V 240VA
BS YFF−1870
Microphone input connector
DCL SYSTEM
Monitor speaker
A07−0294001
Back light switch
No.
Display panel(LCD)
Structure: Rack-mount type Power supply: AC 100 V~240 V Input/output: Microphone, SP, 2W/4W line, PGM, TEL Environment: -10~+50˚C (excluding display panel (LCD) part) Weight: 7.0 kg
T
Base Station
警告WARNING
OFF TERM
ON
PGM IN
OFF TERM
ON IN
1 2W
4W
HYB
SP IN
2W
IN
OUT (DC OUT)
OUT (DC OUT)
CS
CS
OUT (DC OUT)
OUT (DC OUT)
4W
HYB
CPU/SYNC.
SP/TEL
CS
CS
100–240V AC
Power switch
430±2 424±2
Power supply indicator
Microphone volume odjustment volume Monitor speaker volume odjustment volume
250±2
Line level Side tone PGM volume odjustment volume odjustment volume odjustment volume
AC100~240V power supply input connector PGM input unit
HYB2 unit
HYB1 unit
Synchronization unit SP jack (IN/OUT)
CS control unit 4.2
(CS D) (CS C) (CS B) (CS A)
480±2 462±2 460±2 6
12 PUSH
TEST H.S
50±1 76.2±1 88±1
MIC
BASE STAT ION
YFF−1870
LIGHT
Independent telephone line (Modular jack)
LINE1 SP
IN
OUT
T.B
POWER
LINE2 BAL.
PGM
IN
OUT
T.B
BAL.
PGM
7
MIC
*One unit of CS control is provided as standard equipment CSB, CSC, CSD are optional.
Power UNIT YPL-1800
Production on order {Îä´Ó {Ó{´Ó
Î
Îxä´Ó
This product is necessary when five or more CS units are connected to one BS unit.
{nÓ´Ó {ÈÓ´£
Output voltage: 24 V Power supply: AC 100 V 240 V can be selected (on shipping)
È
£Ó ÇÈ°Ó´£ nn´£
Specifications
Environment: -10~+50˚C Weight: 6.0 kg 49
Base Station
(BS)
YFF-1880
Specifications Stucture: Rack-mount type Power supply: AC 100 V~240 V Input/Output: Microphone, SP, 2W/4W line, PGM, TEL Environment: -10~+50˚C Weight: 4.4 kg
• Easily connected to wired intercom (2W/4W system) • Connected to public telephone line • PGM input • Up to 4 CS units can be connected • Rack-mount type EIA=1U, JIS=1J
Power switch Power supply indicator
Line level Side tone PGM volume odjustment volume odjustment volume odjustment volume
AC100V-240V power supply input connector PGM input connector
Originating/receiving call 4W connector Originating/receiving CS control unit call 2W connector
Synchronization connector Independent telephone line (Modular jack) (Modular jack) Line switching switch
50
Digital Wireless Intercom System Cell Station
(CS)
YRW-1870
Antenne Channel display
Slot display
LINE IN connector
DC IN connector
LINE OUT connector
• Diversity system • Compact and easily installed temporarily • Operable with one microphone cable (power supplied from BS)
Standards: Technical standard conformance has been certificated Environment: -10~+50˚C Weight: 705 g (fittings not included)
135±2
CH
155±2
SLOT 1
2
3
4
225±2
Specifications Structure: Wall-mounting and microphone stand mounting system Power supply: DC 24 V (supplied from the main device) DC 12 V (external power supply) Number of calls: Simultaneous calls are possible in 1: 4 Antenna: Diversity operation with shared transmission/reception and integrally structured case Channel setting: Multi-channel access system
Can be rotated through 180˚
153±2
YRW–1870 CELL STATION
Metal fittings
40
PUSH
51±2
44.5±2
DC 12~24V
3 2
IN
4
CS NO. OUT(DC OUT)
Connector cap
Fittings
40 2-
Fittings for CS unit (YRW-1870)
3-φ3.5
15
63
15
10
3
C
25
2-
10.5
20
3
C
M5
M5
51
Cell Station
(CS)
YRW-1850 Specifications Structure: Wall-mounting system Power supply: DC 24V (supplied from the main unit) DC 12V (external power supply) Number of calls: Simultaneous calls are possible in 1: 4 Antenna: Diversity operation with shared transmission/reception and integrally structured case Channel setting: Multi-channel access system Standards: Technical standard conformance has been certificated Environment: -10~+50˚C Weight: 940 g (fittings not included)
Antenna Channel display
LINE OUT
DC IN
LINE IN
Address setting Switch
52
Can be rotated through 180°
Slot display
Digital Wireless Intercom System Personal Station
(PS) YMT-1930 • Light and compact focused on operability • Operable with 2 AA cells • Monitor reception by the method of our own • Status display by LCD
HS-316D
Specifications Structure: Compact, light, dustproof, and drip-proof Power supply: AA alkali cell×2 Continuous use time: 8 hours or more Call: Bidirectional call Antenna: Case-integrated (removal prohibited) Gain: 2.14 dBi or less Channel setting: Multi-channel access system Standards: Technical standard conformance has been certificated Environment: -10~+50˚C Weight: 205 g (batteries included)
68±1
L.K
SW&VOL PUSH TALK
50±3
PUSH CALL
26±1
OFF BAT.
100.5±2
001IZAA1286 SDCL SYSTEM PS YMT–1930
A05–0038001 R
DC3V 0.4W
T
NO. MADE IN JAPAN
DIGITAL WIRELESS MOBILE
BATT LED
HEAD SET connector
TALK switch (Call switch)
SW & VR (Reception volume)
Battery pack
Charger
YBA-4120
PBA-4120
PCF-1920
AA alkali cell×2
Nickel-hydrogen battery (2.4V)
Specifications Charger: 2 units Charge current: 700 mA Charge time: About 3 to 4 hours Power supply: AC 100 V Environment: 0~+40˚C Weight: 1.6 kg
*Batteries are not included.
53
HEADSET
HS-316D (Neck-mounting type) Specifications
.ECKBAND
%ARPHONERECEIVER
Microphone part (dynamic type) Impedance: 140Ω±5% at 1kHz 2
-77.8dB±4dB at 1kHz (0dB=1V/0.1Pa) Frequency characteristics: 100Hz~12kHz within 20dB
φ
-ICROPHONE φ %ARPHONEJACK
&LEXIBLETUBEφ
&IXINGSCREW
#OUPLINGCONNECTOR 32 01 0
(0dB=2×10 Pa) Frequency characteristic: 100Hz~3.5kHz within -20dB #ORDWITHCONNECTOR
#ABLECLIP
Receiver part Impedance: 300Ω±20% (cord resistance included) Rated input: 10 mW Maximum permissive input: 500 mW Output sound pressure level: 120dB±3dB at 1kHz
#ORDLENGTH
φ
#ORDLENGTH
Option
HS-126D (Head-mounting type)
DN-5454 (For high-impedance headset)
AMPLIFIER BOX
Specifications
-)#!44 !DJUSTEDBYREMOVINGTHEBATTERYCOVER 3WITCHINGBETWEEN ANDD"
Voltage gain: 62dB or more Power supply: AA alkali cell×4 Continuous use time: 5 hours or more Environment: -10~+50˚C
Weight: 400g (batteries included)
"ATTERYCOVER
!!ALKALICELL§
Keyboard for registration COF-1800
4W/2W conversion connector DN-5435 2W system (wired intercom etc.) converted into 4W system
4W
54
2W
Digital Wireless Intercom System
Outline of Digital Wireless Intercom System microphone cables connects between BS unit and CS unit, and between CS unit and CS 1 One unit Maximum 150 m between BS unit and CS unit, between CS units (recommended cable: CANARE L-4E5C)
2
Cascade connection up to 4 CS units is possible for one CS control unit in BS unit. Up to 4 CS control units can be mounted in one BS unit (When five or more CS units are connected to one BS unit, the Power UNIT (YPL-1800) is necessary)
3
Up to 4 PS units can make a call to one CS unit.
4
PS units can be divided into 2 groups for use with one BS unit (YFF-1870)
5
No limit for use to the number of PS units dedicated for receiving command (When a PS unit dedicated for receiving command is used, the number of PS units that can be used is reduced by one)
Handover operation When the extension of communication area is desired, handover setting is available by the setting of PS unit. Handover: The CS units to which a PS unit is connected are switched automatically
PS CS No. 1 Mov
e
CS No. 2
Communication area A Communication area B
When moved from communication area A to communication area B, CS unit of PS unit changes from No. 1 to No. 2.
BS
55
System example -1
BS: One unit
CS: 4 units
PS: 16 units
BS CS
CS
Group A
PS
Group B
System example -2
BS: One unit
Power UNIT: One unit
CS: 16 units
PS: 16 units
Power UNIT
Group A BS
CS PS Communication area 1
CS
Communication area 2 PS
CS
Communication area 3
PS
CS
Communication area 4 PS
56
Group B
Digital Wireless Intercom System ƵElectrical characteristics BS (YFF-1870YFF-1880) CS (YRW-1870YRW-1850) Common
Radio wave type
to
Antenna type
¬/2 sleeve antenna
Antenna impedance
50¡
high frequencies
Transmission
Reception
Common
PS YMT-1930
G7D, G7E, G7X, G1D, G1E, G1X ¬/4 whip antenna
Frequency range
1895.15 ~ 1905.95MHz
Total number of frequencies
37 waves (control carrier 2 waves, communication carrier 35 waves)
Separation
300kHz
Oscillation system
Quartz control frequency synthesizer system
Frequency stability
Within ±3×10-6
Modulation accuracy
12.5% or less
Antenna power
0.01W (+20 -50%)
Intensity of spurious radiation
2.5μW or less (beyond band) 250 mW or less (within band)
Modulation system
±/4 shift QPSK
Audio frequency
3kHz or less (300~3kHz)
Neighboring channel leak power
56dB or more than carrier wave power
Occupied frequency band area
Within 288 kHz
Reception system
Double superhetrodyne
Reception sensitivity
16 dBμV or less (bit error rate 1×10-2)
Spurious block ratio
47 dB or more
Neighboring channel selectivity
50 dB or more (600 kHz detuning)
Body radiation
4 nW or less
Line frequency characteristic
300Hz~3kHz (within ±3dB)
Line input/output
0dBm balanced
Microphone input
-60dBm balanced
-20~0dBm unbalanced
Speaker output
Inside 1W Outside 2W
10W or more at 8¡
External input
0dBm balanced
Used power supply/ power consumption
AC100V±15%: 3A AC240V±15% DC 12V: 1A (master unit only)
Use environment
Temperature; -10 ~ +50˚C, Humidity: Within 30~90%
130 mA or less at 3.0 V Operation terminated at 2.2V
YFF-1880 is not equipped with a microphone input or speaker output.
ƵAvailable frequencies (for private organization) Carrier number
Frequency (MHz)
Carrier number
Frequency (MHz)
Carrier number
Frequency (MHz)
Carrier number
1
1895.150
11
1898.150
21
1901.150
31
Frequency (MHz) 1904.150
2
1895.450
12
1898.450
22
1901.450
32
1904.450
3
1895.750
13
1898.750
23
1901.750
33
1904.750
4
1896.050
14
1899.050
24
1902.050
34
1905.050
5
1896.350
15
1899.350
25
1902.350
35
1905.350
6
1896.650
16
1899.650
26
1902.650
36
1905.650
7
1896.950
17
1899.950
27
1902.950
37
1905.950
8
1897.250
18
1900.250
28
1903.250
9
1897.550
19
1900.550
29
1903.550
10
1897.850
20
1900.850
30
1903.850
12, 18CH are control carriers
57
Digital Wireless Intercom System
Portable type System
Basic system
Wired Intercom System, Connection with 2 channels is possible! Cell Station (CS) Line input/output Wired intercom 2/4W
RF part Communication control part AF part H. Set
Personal Station (PS) 2/4W
1
3
2
4
Synchronous cable Line input/output Wired intercom 4W
AF part TEL
BATT
TEL
Cell Station
Base Station (BS)
(CS) YFP-1821
Features 2W line of Clear-Com can be input directly 4 PS units can be connected to one CS unit. Up to 5 CS units can be used simultaneously with synchronous connection Continuous use time is 7 hours or more (when 8 AA alkali cells are used) The following settings are available with a cross key on the front
4OTHEANTENNAPOINT
58
4OTHEANTENNAPOINT
#ANBEROTATEDTHROUGH
-
• Setting of LINE input/output interface (4W/2W) • Setting of talkback • Setting of audio input/output level • Confirmation of registration ID • Setting of RF output level Specifications Audio frequency: 3.4 kHz or less Audio encoding system: 32 kbit/s ADPCM Line specification: 4W: IN 0 dBm, OUT 0 dBm AIR: IN -20dBm Microphone input: -60dBm (unbalanced 600¡) Speaker output: 15 mW or more (at 8¡) Power supply: DC8.0~16.0V (negatively grounded) Structure: Portable type Standards: Technical standard conformance has been certificated Environment: -10~+50 Weight: 430 g
Digital Wireless Intercom System Base Station
(BS)
YOP-1800 Features Audio frequency: 3.4 kHz or less Line specification: 4W: Input -20dBm(unbalanced 600¡) Output 0dBs(balanced 50¡) Program input: -20dBm(balanced 600¡) Public telephone function input/output: -10dB(600¡) 1 line Power supply: DC 8.0~13.5V(negatively grounded) Structure: Portable type Environment: -10~+50˚C Weight: 480 g
Battery box YBB-1800 YOP-1800 Battery box 8 AA alkali cells are used
59