Medical Filtration Technology
Dystrybucja:
Atut Sp. z o.o. ul. B. Prusa 8; 20-064 Lublin tel./fax: 081 747 43 53 e-mail:
[email protected] www.atut.lublin.pl
Dystrybucja:
Atut Sp. z o.o. ul. B. Prusa 8; 20-064 Lublin tel./fax: 081 747 43 53 e-mail:
[email protected] www.atut.lublin.pl
Contents INTRODUCTION History
Pages
Quality Management
Pages
OEM and private label
Page
MICROFILTRATION
5–6 7 – 10 11
Pages
12 – 20
Filters for equipment protection
Page
Filters combined with HME for patient protection
Page
Humidifiers
Pages
21 22 23 – 24
GARD BREATHING SYSTEM FILTERS
BREATHING CIRCUITS
Page
25
FILTER MEDIA FOR MEDICAL APPLICATIONS Munktell air filter media
Page
Electrostatic filter media
Page
Hydrophobic micro-glass fibre papers
Page
Polyether/polyesters FOAM
Page
Hydrophobic PTFE Membrane filters
Page
26 27 28 29 30
PROTECTION AND STERILIZATION PAPERS Sterilization papers
Page
Covers and protection papers
Pages
Dental papers
Page
31 32 – 33 34
SPECIAL PRODUCTS ECG contact paper
Page
Container filters
Page
Filter rings for freezing Point Osmometer
Page
Protection filter for DNA-extraction
Page
Cytocentrifugation
Page
Neonatal screening with sample carrier papers TFN
Page
REGISTER
Pages
35 35 36 36 37 38 39 – 40
www.munktell.com Dystrybucja:
Atut Sp. z o.o. ul. B. Prusa 8; 20-064 Lublin tel./fax: 081 747 43 53 e-mail:
[email protected] www.atut.lublin.pl
We are very proud to present you our new catalogue Medical Filtration Technology. Our programme has been complemented by a variety of own new products. We can now offer you a complete product range for venting filters, breathing system filters, filter media for medical applications as well as protection and sterilization papers.
The catalogue is divided in seven different sections:
G
INTRODUCTION
G
MICROFILTR ATION
G
GARD BREATHING SYSTEM FILTERS
G
BREATHING CIRCUITS
G
FILTER MEDIA FOR MEDICAL APPLICATIONS
G
PROTECTION AND STERILIZATION PAPERS
G
SPECIAL PRODUCTS
INTRODUCTION
DEAR CUSTOMERS
As usual, a large portion of our product programme can be supplied on a private label basis. Our products are available through many distributors all around the world. You are also most welcome to approach us directly should you require any further information.
Gustav Kyrk President Munktell Group
Dystrybucja:
Atut Sp. z o.o. ul. B. Prusa 8; 20-064 Lublin tel./fax: 081 747 43 53 e-mail:
[email protected] www.atut.lublin.pl 3
www.munktell.com Dystrybucja:
Atut Sp. z o.o. ul. B. Prusa 8; 20-064 Lublin tel./fax: 081 747 43 53 e-mail:
[email protected] www.atut.lublin.pl
INTRODUCTION
History The world’s first manufacturer of filter paper The Swedish chemist J.J. Berzelius (1779 – 1848) is regarded as the inventor of the first real filter paper. He was the first in using pure wet-laid all-rag paper for the retention of precipitates in chemical analysis. At Berzelius‘ suggestion, the development and manufacture of such paper was begun around 1815 at J. H. Munktell’s paper mill at Grycksbo. Similar production was later begun in England and Germany, but the ”Swedish Filter Paper“ retained its leading position, and its characteristics, particularly its purity, set the standard for analytical filter papers. The paper which was hand-made at the time of Berzelius, is still made at the same paper mill today, but now with the aid of modern paper-making technology. Munktell filter papers with Berzelius picture – your assurance of original quality!
Munktell Filter Papers were long delivered in hand-made birchbark packages.
5
INTRODUCTION
And still one of the leading Our products are being sold under the trademark MUNKTELL. Our experience in the papermaking trade of many years is the guarantee of high quality filter papers with properties tailored to different applications. We will spare no effort to perpetuate Munktell’s fine filter paper tradition. Intensive Research and Development work in paper technology vouches for a continuous improvement of our filter paper to meet the requirements of tomorrow.
Munktell Filter AB, Falun, Sweden
Munktell Filter AB, Grycksbo, Sweden
Munktell & Filtrak GmbH, Bärenstein, Germany
Munktell & Filtrak GmbH, Battenberg, Germany
6
INTRODUCTION
Quality Management System – ISO 9001:2000
All our efforts are focused onto the one goal:
To win the confidence of the customers in the quality of our products and services We are doing our utmost to realise this ambition and will do all that is necessary to have products and services meet even the highest expectations. At the end of the day, our business depends on your success. Quality control already begins during development. At this stage already, our chemists and technicians maintain close contact with our customers in order to tailor the right product for a given application. Raw materials are the basis for a consistent paper quality. This is why stringent quality checks are carried out for incoming goods. During production, consistency and degree of beating are watched very closely. Automatic measuring devices during production in the course of an in-line production control in the paper machine register the slightest deviation. A continuous process control in the laboratory located at the paper machine provides a direct flow of information to the staff operating the machine. Quality measures on the production site are complemented by checks carried out in the quality department. Munktell’s sophisticated test rigs correspond to the standard of modern technology. Regular revision of measuring means guarantees their function and precision. The whole staff has been trained to know and implement the conditions and standards of quality control so that the next conversion step is only carried out when the respective demands have been met. We apply customerorientated quality assurance also to the converting sections of our plant creating thus a basis for a successful collaboration for many years to come.
7
INTRODUCTION
Quality Management System – ISO 9001:2000 Munktell has implemented Quality Management Systems which are confirmed by certification to comply with all the requirements of the DIN/SS EN ISO 9001:2000 norm. It is the application of these Quality Assurance Systems that guarantees a high quality standard and competitiveness in constantly more demanding markets and proceeding internationalization.
CERTIFICATE
The Certification Body of TÜV Management Service GmbH certifies that
MUNKTELL & FILTRAK GmbH Niederschlag 1 D-09471 Bärenstein
has established and applies a Quality Management System for
Moreover, the certification is a token of customer orientation from product design to customer service. Continuous product evolution and improvement of existing production processes help us outperform the required quality standard.
Development, Manufacture and Sales of Filter and Special Papers, Filter Elements, Sales of Glassmicrofibres and Membranfilter Products
An audit was performed,Report No. 70019996 Proof has been furnished that the requirements accordint to
ISO 9001:2000
Along with a competent service, these merits will contribute to the acquisition of new customers and the strengthening of our existing relations.
Quality Policy means for us to produce at the highest level. Working precisely and monitoring closely each and every conversion step until despatch have the utmost priority.
8
are fukfilled. The certificate is valid until 2007-05-17 Certificate Registration No. 12 100 6321 TMS
Munch, 2004-05-24
As many of our products are used in medical-technical applications, our manufacturing and quality control procedures comply with the GOOD MANUFACTURING PRACTICES (GMP) and ISO 13485:2003. Each step in the manufacturing process, from incoming materials through production up to finished products, is documented, validated and controlled. Upon request, we can provide you with certificates and technical data sheets.
INTRODUCTION
Quality Management System GMP/CE AND ISO 13845:2003
Our quality management system is supervised and certified by SEMKO, Stockholm, Sweden.
9
INTRODUCTION
Environmental Management System – ISO 14001:2004 In order to control the influence that our products and processes have on the environment, we are using ISO 14001 as a guideline. This means that we need to have full control over our • • • •
incoming products production / processes waste / waste disposal environmental legislation
Our main targets are the minimization of any negative influence that might occur in our processes and the constant improvement of our performance. ISO 14001 provides us with the elements of an effective environmental management system which we have implemented to achieve our environmental and economic goals.
Environmental Management is for us a token of acting economically and carrying ecological responsibility. This is why we have implemented this system for a voluntary preventive environmental protection.
10
Munktell has a long experience in supplying OEM products all around the world. Several major filter producers have our products as a complement to their own product line. Many medical equipment manufacturers use our specially designed filter products for protection against contamination.
We can supply the following OEM products
INTRODUCTION
OEM and private labelling
Medical products • Sterilization Papers • Dental Papers • Table Top Papers • Inline Filters • Breathing System Filters • Heat and Moisture Exchangers (HME’s)
We focus our resources on service, quality, troubleshooting and close customer relationships. We are organized in a way that enables us to quickly and accurately respond to customer needs. Product development focuses on specific customer or market needs and innovation approaches. We combine this with a profound knowledge of materials, chemistry and process to develop products that offer performance and quality leadership. Should you have an idea for a new product or a specific demand, please do contact us.
Munktell Filter AB Box 1003, S-79110 Falun, Sweden
Munktell & Filtrak GmbH Niederschlag 1 D-09471 Bärenstein, Germany
Munktell & Filtrak GmbH Am Bahnhof 6a D-35088 Battenberg, Germany
Ph. +46 23 705880 Fax +46 23 40115 E-Mail:
[email protected]
Ph. +49 3 73 47 830 Fax +49 3 73 47 8364 E-Mail:
[email protected]
Ph. +49 64 52 21002-0 Fax +49 64 52 8985 E-Mail:
[email protected]
Filtration is our business 11
M I C R O F I LT R AT I O N M I C R O F I LT R AT I O N
Pumpgard Applications: Pumpgard is a ready-to-connect filter unit consisting of a PTFE membrane filter sealed within a polypropylene housing. Pumpgard stops water from overflowing from a full suction bottle or suction bag preventing its penetration into the pump, as well as corrosion, expensive cleaning and breakdown of vacuum pumps that would result from it.
Specification Housing:
Polypropylene
Membrane:
PTFE 0.45 µm reinforced with polypropylene grid
Connectors:
stepped hose barb 6 – 12 mm
Diameter:
64 mm
Filter Area:
20 cm2
Typical air flow rates:
1.8 l/min at 0.02 bar 4.6 l/min at 0.05 bar 8.5 l/min at 0.1 bar
Max. operation pressure:
3 bar (300 kPa)
Water Penetration Point:
approx. 400 kPa (0.2 µm)
Max. Temperature:
134°C (autoclave)
Pre-sterilized with:
ethylene oxide
Pack Size:
3 pcs./pack
Pressure Drop vs. flow graph for MS-20
Dimensions
Microfilter MS-20 Applications: Microfilter for supply air and venting filter for medical and pharmaceutical applications. Removal of particles and liquids (at low pressures) from air/gas supplies going to instruments that are sensitive to impurities
Nipple
Nipple Filter Housing
Specification Housing:
Polystyrene
Filter Medium:
Munktell hydrophobic micro-glass fibre paper
Connectors:
nipples connected to filter housing with snap lock. Tubes with an internal diam. of 4 to 8 mm can be connected to the nipples
Retention:
> 99.999% (0.3 µm)
Max. temperature:
80°C
Filter Area:
5.3 cm2
Sterilization:
can be supplied in sterile version
Each filter is checked individually for retention.
12
Dimensions
Pressure Drop vs. flow graph for MS-40
Applications: Microfiltration of supply air/gas (e.g. in CO2 incubators and oxygenators) and venting filter in medicine and for pharmaceutics production.
Specification Housing:
Polystyrene
Filter Medium:
Munktell hydrophobic micro-glass fibre paper
Connections:
for tubes with internal diam. of 4 – 6.5 mm
Retentions:
> 99.999 % (0.3 µm)
Max. temperature:
80°C
Sterilization:
can be supplied in sterile version
M I C R O F I LT R AT I O N
Microfilter MS-40
Each filter is checked individually for retention.
Microfilter MS-64
Dimensions
Pressure drop vs. flow graph for MS-64
Applications: Elimination of bacteria, microorganisms and other particles for various types of medical work. Filtration for supply of particle-free air or gas for measuring devices, assuring their reliable function and high quality.
Specification Housing:
Polystyrene
Filter Medium:
Munktell hydrophobic micro-glass fibre paper
Connections:
for tubes with internal diam. of 10 – 14 mm
Retention:
> 99.999 % (0.3 µm)
Max. temperature:
80°C
Sterilization:
can be supplied in sterile version
As MS-61 available with a length of 110 mm. Each filter is checked individually for retention.
For ordering information please refer to the enclosed register
13
M I C R O F I LT R AT I O N
Microfilters MS-41, MS-42T and MS-43T
Dimensions
Pressure Drop vs. flow graph for MS-41 hPa
Applications: Microfiltration of supply air/gas (e.g. in CO2 incubators and oxy-genators) and venting filter in medicine and for pharmaceutics production.
l/min
Specification for MS-41 Housing:
Polystyrene
Filter Medium:
Munktell hydrophobic micro-glass fibre paper
Connections:
for tubes with internal diam. of 6 – 9 mm
Retention:
> 99.999 % (0.3 µm)
Max. temperature:
80°C
Sterilization:
can be supplied in sterile version
Specification
MS-42 T
Housing:
MS-43 T Polystyrene – transparent
Filter Medium:
Hydrophobic Micro-glass Fibre Medium
Connections:
for Tubes with inner 6 – 9 mm
Retention:
of
for Tubes with inner 4 – 6.5 mm
> 99.999% (0.3 µm)
Max. temperature:
80°C
Sterilization:
can be supplied in sterile version
hPa
Pressure Drop vs. flow graph for MS-42 T
Each filter is checked individually for retention.
14
of
hPa
Pressure Drop vs. flow graph for MS-43 T
Dimensions
Applications:
female
Microfiltration of volumes of up to 30 – 40 l/min for sterile and particle-free air or gases. Mainly used for cleaning exhaust air from suction devices
male
Connection Combinations
Pressure Drop vs. flow graph for MS-40-S
Specification Housing:
Polystyrene
Filter Medium:
Munktell hydrophobic micro-glass fibre paper
Connections:
male and female -diam.: 11 mm or special
M I C R O F I LT R AT I O N
Microfilter MS-40-S
connections for tubes with internal diam. of 6.5 – 9 mm Retention:
> 99.999 % (0.3 µm)
Max. temperature:
80°C
Each filter is checked individually for retention.
Dimensions
Microfilter Suctogard Applications: Microfiltration of volumes of up to 30 – 40 l/min for sterile and particle-free air or gases. Mainly used for cleaning exhaust air from suction devices.
Pressure Drop vs. flow graph for Suctogard
Specification Housing:
Polystyrene
Filter Medium:
Munktell hydrophobic micro-glass fibre paper
Connections:
male and female -diam.: 11 mm or special connections for tubes with internal diam. of 6.5 – 9 mm
Retention:
> 99.999% (0.3 µm)
Max. temperature:
80°C
Each filter is checked individually for retention. For ordering information, please refer to the enclosed register.
15
M I C R O F I LT R AT I O N
Microfilter MS-681
Pressure Drop vs. flow graph for MS-681 with holder combination
Dimensions
Applications: Microfiltration of air in cultivation and storage tanks requiring sterile and particle-free air. In medicine used e.g. in autoclaves, sterilizers, incubators and ventilators for venting and sterile air supply.
Specification Housing:
Polystyrene (element)
Filter Medium:
Munktell hydrophobic micro-glass fibre paper
Holders:
nickel-plated brass, one half with snap-lock
Retention:
> 99.999% (0.3 µm)
Connections:
see page 20
Max. temperature:
80°C
Sterilization:
the element (CMS-681) is usually supplied in sterile version. Upon request it is available in non-sterile version
Packing:
individually packed (CMS-681)
Each filter is checked individually for retention.
MicroFilter LP-10
Dimensions
Pressure Drop vs. flow graph for LP-10
Applications: Supply and exhaust air filters for the ventilation of tanks and other containers where a sterile environment is required, e.g. in breweries, pharmaceuticals manufacture and the food industry. Also used as an absolute filter for particles deriving from laser cutting.
Specification Housing:
Polystyrene
Filter Medium:
Munktell hydrophobic micro-glass fibre paper with spacers
Connections:
outside diameter 38 or 80 mm
Retention:
> 99.999% (0.3 µm)
Max. temperature:
80°C
Each filter is checked individually for retention.
For ordering information please refer to the enclosed register.
16
Dimensions
Pressure Drop vs. flow graph for LP-025
Applications: Microfiltration of air and gases to supply a sterile and particle-free flow to medical equipment (ventilators, sterilizers...) and in pharmaceutical and food applications (autoclaves, venting filters....)
Specification Housing:
Polystyrene Styrolux (transparent LP-025)
Filter Medium:
Munktell hydrophobic micro-glass fibre paper
Efficiency:
> 99.999 % (0.3 µm)
Connectors:
female connector ISO x 22 mm male connector ISO x 22 mm
Max. temperature:
80°C
Packing:
individually packed
Sterilization:
can be supplied in sterile version
M I C R O F I LT R AT I O N
Microfilter LP-025
Each filter is checked individually for retention.
Microfilter LP-050
Dimensions
Pressure Drop vs. flow graph for LP-050
Applications: Microfiltration of air and gases to supply a sterile and particle-free flow to medical equipment (ventilators, sterilizers...) and in pharmaceutical and food applications (autoclaves, venting filters....)
Specification Housing:
High-impact Polystyrene
Filter Medium:
Munktell hydrophobic micro-glass fibre paper
Efficiency:
> 99.999 % (0.3 µm)
Connectors:
female connector ISO x 22 mm male connector ISO x 22 mm
Max. temperature:
80°C
Packing:
individually packed
Sterilization:
can be supplied in sterile version
Each filter is checked individually for retention. For ordering information please refer to the enclosed register.
17
M I C R O F I LT R AT I O N
Microfilters VIROGARD and BACTOGARD Applications: Microfiltration of air and gases to supply a sterile and particle-free flow to medical equipment (ventilators,sterilizers...) and in pharmaceutical and food applications (autoclaves,venting filters.....)
Dimensions
Pressure Drop vs. flow graph for Virogard
Dimensions
Pressure Drop vs. flow graph for Bactogard
Specification Virogard and Bactogard
18
Housing:
High impact Polystyrene
Filter Medium:
Munktell hydrophobic micro-glass fibre paper
Efficiency:
> 99.996 % (0.3 µm)
Connectors:
ISO F22 and ISO M22
Max. temperature:
80 °C
Packing:
individually packed, carton with 50 pieces.
Sterilization:
can be supplied in sterile version
Applications: Complete elimination of particles, micro-organisms and odour in plumes from laser surgery and diathermy.
Specification Housing:
High impact Polystyrene
Filter Medium:
Munktell hydrophobic micro-glass fibre paper
Efficiency:
> 99.9999 % (0.3 µm)
Connectors:
ISO F22
Flow:
< 200 l/min
Protection cap:
LD Polyethylene
Others:
contains active absorption element
Packing:
individually packed
M I C R O F I LT R AT I O N
Lasertrap 100
Hydrophobic PTFE Venting Filters Applications: For small containers and air venting bottles, we have a 26 mm polyester-reinforced 0.2 µm PTFE venting filter. The connectors are luer lock – female and male. The housing – made of cyrolite – withstands a maximum pressure of 6 bar. The filters can be supplied in both sterile and non-sterile version.
Specification: Air Flow Rates:
approx. 1.4 l/min at p=1 bar
Bubble Point:
1.2 bar min. values with isopropanol
Burst Strength:
6.0 bar (600 kPa; 87 psi)
Filter Area:
5.3 cm2
Water Penetration Point:
–> 4.0 bar (400 kPa; 58 psi)
For ordering information please refer to the enclosed register
19
M I C R O F I LT R AT I O N
Connectors and Adapters Product
Dimensions
Material
Munktell Filter
Male Nipple Olive
male 11 mm Ø, for tubes with internal Ø 6 – 9 mm
Polystyrene
MS-40-S, Suctogard, MS-61
Female Nipple Olive
female 11 mm Ø, for tubes with internal Ø 6 – 9 mm
Polystyrene
MS-40-S, Suctogard,
Connection piece R 3/8"
female ISO 22 mm R 3/8"
ABS
LP-025, LP-050
Connection piece R 1/2"
female ISO 22 mm R 1/2"
ABS
LP-025, LP-050
MS-681 holders Tapered pipe thread 3/4" (KR 3/4")*
nickel-plated brass
MS-681 holder combinations:
Tube connection Ø 31.8 mm 1 1/4" (SL1 1/4")*
nickel-plated brass
LKR 3/4“
Free inlet/ outlet (FI)**
* also available with clamps ** als available without clamps
KR = tapered pipe thread FI = free inlet SL = tube connection The prefix L indicates holder half with lock clamps
For ordering information please refer to the enclosed register.
20
nickel-plated brass
Fl LSL1 1/4“
SL1 1/4“
G A R D B R E AT H I N G S Y S T E M F I LT E R S
The filters with a pleated, hydrophobic mechanical filter membrane give the highest possible protection against contamination of the breathing system. Gard has such a mechanical membrane and is therefore very suitable. Bacstop and Bacstop Mini have an electrostatic filter membrane with a slightly lower filtration efficiency. Bacstop and Bacstop Mini will give sufficient protection during treatments that have low risks for contamination. The Gard models have several combinations of ISO connectors. The filters are available with a capnograph port.
GARD Product specification Dead space (ml):
124
Weight (g):
60
Resistance (Pa) 60 l/min:
160
Filtration efficiency BFE/VFE (%):
>99,9999
Housing:
Styrolux/transparent Values are target values for art. no 321 111
BACSTOP
G A R D B R E AT H I N G S Y S T E M F I LT E R S
Filters for equipment protection
Product specification Dead space (ml):
85
Weight (gr):
35
Resistance (Pa) 60 l/min:
140
Filtration efficiency BFE/VFE (%):
>99,99
Housing:
Styrolux/transparent Values are target values for art. no 321 203
BACSTOP MINI Product specification Tidal Volume (ml):
150 – 500
Dead space (ml):
25
Weight (g):
13
Resistance (Pa) 15 min:
80
Filtration eff. BFE/VFE (%):
>99,998
Housing:
Styrolux/transparent Values are target values
For ordering information please refer to the enclosed register.
21
G A R D B R E AT H I N G S Y S T E M F I LT E R S
Filters combined with HME for patient protection The combination of a filter and aHME in the same housing is the ultimate solution for efficient microbial protection and humidification. Combigard is a combination of the excellent mechanical filter with the effective HME. Bacstop/HME is suitable for the treatments with lower risk for contamination but still with an effective humidification. The Combigard models have several combinations ofISO connectors. The filters are available with a capnograph port.
COMBIGARD Product specification Dead space (ml):
124
Weight (g):
60
Resistance (Pa) 60 l/min after 1 hr: 60 l/min after 24 hrs:
170 180
Filtration efficiency BFE/VFE (%):
>99,9999
Moister output (mg H2O/l):
29
Housing:
Styrolux/transparent
Tested according ISO 9360:1992
Values are target values for art.no. 321 104
BACSTOP HME Product specification Dead space (ml):
77
Weight (g):
40
Resistance (Pa) 60 l/min after 1 hr: 60 l/min after 24 hrs:
210 210
Filtration efficiency BFE/VFE (%):
>99,99
Moister output (mg H2O/l):
31
Housing:
Styrolux/transparent
Tested according ISO 9360:1992
Values are target values for art. no. 321 202
BACSTOP HUMINI Product specification
22
Tidal Volume (ml):
150 - 500
Dead space (ml):
23
Weight (g):
15
Resistance (Pa) 15 l/min:
82
Filtration efficiency BFE/VFE (%):
>99,998
Moister outp. (mg H2O/L) @ Vt=250 ml.:
32
Housing:
Styrolux/transparent
Tested according ISO 9360:1992
Values are target values for art.no. 321 209
The HME inserts in the transparent housings are of 2 component micro-fibres and give a very low resistance. The resistance is low even after24 hours use. Together with an optimum moisture capacity it keeps the patient hydrated and the breathing system dry. The HMEs are available in a variety of sizes from Neogard for neonatals till HME Flex for adults.
HME FLEX Product specification Tidal Volume (ml):
500 – 1500
Dead space (ml):
90
Weight (g):
20
Resistance (Pa) 60 l/min after 1 hour: 60 l/min after 24 hours:
160 160
Moisture output (mg H2O/l):
28
Housing:
EVA
Tested according ISO 9360:1992
Values are target values
HME FLEX MINI
G A R D B R E AT H I N G S Y S T E M F I LT E R S
Humidifiers
Product specification Tidal Volume (ml):
300 – 1500
Dead space (ml):
64-83
Weight (g):
12,5
Resistance (Pa) 60 l/min after 1 hour: 60 l/min after 24 hours:
160 160
Moisture output (mg H2O/l):
28
Housing:
EVA
Tested according ISO 9360:1992
Values are target values
HME 1000 Product specification Tidal Volume (ml):
250 – 1000
Dead space (ml):
27
Weight (g):
7
Resistance (Pa) 60 l/min after 1 hour: 60 l/min after 24 hours:
120 130
Moisture output (mg H2O/l):
23
Housing:
K-resin/transparent
Tested according ISO 9360:1992
Values are target values
23
G A R D B R E AT H I N G S Y S T E M F I LT E R S
TRACHGARD-HC Product specification Housing:
Styrolux, transparent
Connector:
ISO F15
HME medium:
foam
Dead space (ml):
18
Weight (g):
5
Tidal Volume (ml):
50 – 1000
Pressure drop (hPa) at 30 l/min: at 60 l/min: at 90 l/min:
0,1 0,2 0,3
Moisture output (mg H2O/l): At tidal volume of 1000 ml: 500 ml: 50 ml:
20 24 27
Tested according ISO 9360:1992
Values are target values
NEO-GARD Product specification Tidal Volume (ml):
5 – 100
Dead space (ml):
2
Weight (g):
2
Resistance (Pa), 10 l/min:
170
Moisture output (mg H2O/l) At tidal volume of 45 ml:
32
Housing:
SAN
Tested according ISO 9360:1992
Values are target values
For ordering information please refer to the enclosed register.
24
B R E AT H I N G C I R C U I T S
Corrugated tube Diameter:
22 mm
Length:
1500 mm or 750 mm
Connections Parallel wye:
ISO M22/F15
Machine connection:
ISO F22
Material:
EVA/Polyethylene
PAEDIATRIC CIRCUITS Corrugated tube Diameter:
15 mm
Length:
1000 mm or 750 mm
B R E AT H I N G C I R C U I T S
ADULT CIRCUITS
Connections Parallel wye:
ISO F15
Machine connection:
ISO F22
Material:
EVA/Polyethylene
CATHETER MOUNTS SMOOTH WALL Flex Soft Length:
150 mm
Connection:
ISO F15 and ISO M15
Material:
EVA
CORRUGATED Flex Straight Length:
165 mm
Connection:
ISO M22/F15 and ISO M15
Material:
EVA/Polyethylene
CORRUGATED Flex Elbow Length:
165 mm
Connection:
ISO M22/F15 and ISO M15
Material:
EVA/Polyethylene
MASK ELBOW Mask elbow with or without gas sampling port. Connection:
ISO M22/F15 and ISO M15
Material:
EVA/Polyethylene
25
F I LT E R M E D I A F O R M E D I C A L A P P L I C AT I O N S F I LT E R M E D I A F O R M E D I C A L A P P L I C AT I O N S
Munktell air filter media The MUNKTELL filter media concept is to manufacture media in all efficiency ranges of interest to the cleanroom industry – efficiencies from 99.95 % to 99.9999 % for 0.12 µm particle size. Consequently, to fulfil the requirements beyond the present standards and are appropriate filter media for cleanroom applications. These products are then converted by the customers into a variety of shapes and configurations to suit a multitude of industrial, medical, electronical and personal protection applications. MUNKTELL air filter media give you greater freedom
in filter design and opens markets where you could not previously participate. They are produced on a paper machine especially designed for the processing of micro-glass fibres. Only high purity borosilicate glass fibres are employed, in thicknesses rangeing from 0.2 to 2.0 µm, depending on the required level of efficiency.
State of the art test rigs document the quality MUNKTELL maintains an extensive laboratory facility where inline and quality tests are conducted on an ongoing basis in order to maintain quality and consistency. Our test facilities give you the most accurate and reliable data possible. You will know what kind of filtration performance you can expect from each grade, i.e. the removal efficiency for each particle size at a chosen flow rate. The test rig measures particle sizes from 0.05 to 0.5 micron with extreme accuracy. This enables you to make better decisions in designing your products and provides hard fact to validate your decisions with your customers.
26
Technician carrying out a CNC test for the determination of the efficiency in particle retention of a filter medium
MUNKTELL offers a complete range of products for the
production of breathing system filters. Our programme covers high efficiency hydrophobic air filter media (HEPA) and electrostatic filter media for different medical applications. In our programme you will also find different types of HME (heat and moisture exchange) products.
Electrostatic filter media – MES MES is an electrostatically charged needle-felt comprising
Medical filters are used in respiratory support equipment such as life supporting breathing machines. They are fitted in the airway between the equipment and the patient. The removal of bacteria from the air breathed in the hospital environment is critical in the protection of the patient, other hospital personnel and the breathing support equipment.
two electrically dissimilar synthetic polymers which are specially prepared and processed at the manufacturing stage creating a charge transfer between the two different types of fibre. Discrete charges, both positive and negative, are present on the fibre surface, however, overall, the filter is electrically neutral. As one of the fibres in the blend is an extremely effective insulator, the charge transfer is stable and permanent. The surface charging dramatically enhances the filtration efficiency, by electrostatically attracting the particles to the fibre surface and thereby removing particles from the airstream.
MES achieves very high bacterial and viral removal efficiencies and is widely used in anaesthetic circuitry, spirometry and CPAP applications. MES is laminated with a 15 g/m2 polypropylene
nonwoven. The advantage of MES is that it combines the benefits of filters with open pore structure, i.e. low air flow resistance and high dirt holding capacity, with high efficiencies even in the submicronic range.
F I LT E R M E D I A F O R M E D I C A L A P P L I C AT I O N S
Filter media for medical technology
Typical properties Grade
Basis Weight g/m2
Scrim Weight g/m2
Pressure Drop Pa (15.8 cm/s)
Penetration % (BS4400)
MES 15/250/15
250
15
< 40
< 1.3
MES 15/300/15
300
15
< 45
< 0.8
Above data are typical values from production runs and do not represent a specification. MES Electrostatic Filter Media can be supplied in form of circles, sheets or rolls.
For ordering information please contact our office.
27
F I LT E R M E D I A F O R M E D I C A L A P P L I C AT I O N S
Hydrophobic micro-glass fibre papers For high efficiency products, Munktell offers a wide range of Micro-Glass Fibre Papers. Ourprogramme covers papers from 99 % up to 99.9999 % efficiency.
Typical properties Grade
Basis Weight g/m2
Lamination
Hydrophobic
Pressure Drop Pa (5.3 cm/s)
Efficiency* %mm
MG S
75
No
Yes
< 330
99.985
MG T
75
No
Yes
< 450
99.999
MG 1336/2-K 100
104
One side
Yes
< 335
99.97
MG 2336
135
Both sides
Yes
< 370
99.97
XA 3
75
No
Yes
< 250
99.95
XA 5
75
No
Yes
< 330
99.97
* for 0.3 µm particles
In order to increase tensile strength in grades MG 1336 and MG 2336, they have been laminated with a 15 g/m2 polyester scrim.
Micro-glass fibre papers can be supplied in form of circles, sheets or rolls.
For ordering information please contact our office.
28
F I LT E R M E D I A F O R M E D I C A L A P P L I C AT I O N S
Polyether/Polyesters FOAM • Impregnation: The HME foam filters can also be supplied treated with a solution of calcium chloride dihydrate or calcium chloride hexahydrate
• Storage: The foam material is UV ray sensitive and should not be exposed to sunlight or other UV-ray sources. The filters are best stored in temperatures around 22°C (68°F).
• Colours: white and blue
Can be supplied as circle, cylinder or sheet. Sizes according to customer specification.
Dystrybucja:
Atut Sp. z o.o. ul. B. Prusa 8; 20-064 Lublin tel./fax: 081 747 43 53 e-mail:
[email protected] www.atut.lublin.pl For ordering information please contact our office.
29
F I LT E R M E D I A F O R M E D I C A L A P P L I C AT I O N S
Hydrophobic PTFE Membrane Filters PTFE membrane filters are permanently hydrophobic by their composition. They allow the passage of air and gases and do not get clogged up by humidity. When intended for the filtration of aqueous solutions, they need to be wetted with ethanol or methanol prior to use in order to permit water penetration. PTFE membrane filters are ideal for venting applications, phase separations, aerosol collection and gas filtration. PTFE membrane filters offer an excellent chemical compatibility so that they can be used even for those solvents and acids which other filter types are not resistant against.
Specification for hydrophobic PTFE Membrane Filters Adsorption: 8 µg/cm2 for γ-globuline for pore size 0.2 µm. Bubble Point (minimum value for the 0.2 µm membrane and average values for all other porosities, treated in all cases with isopropanol): 0.2 µm. . . . . . . . . . . . . . . . . 1.2 bar 0.45 µm. . . . . . . . . . . . . . . . . 0.8 bar
1.2 µm . . . . . . . . . . . . . . . . 0.45 bar 5.0 µm . . . . . . . . . . . . . . . . 0.1 bar
Flow Rates (average values per cm2 with air and p = 0.05 bar): 0.2 µm. . . . . . . . . . . . . . . . . 0.2 l/min 0.45 µm. . . . . . . . . . . . . . . . . 0.3 l/min
1.2 µm . . . . . . . . . . . . . . . . 1.6 l/min 5.0 µm . . . . . . . . . . . . . . . . 4 l/min
Compatibility: compatible with most solvents. See compatibility table. Extractable Substances (with water): none detected Sterilization: Autoclave (121° C or 134° C), with ethylene oxide. Thickness: varies acc. to pore size, between 65 µm (0.2 µm) and 100 µm (5.0 µm). Validation: Sterilization Capability of 0.2 µm membrane filter has been verified with the BCT (Bacteria Challenge Test).
For ordering information please contact our office.
30
P R O T E C T I O N A N D S T E R I L I Z AT I O N PA P E R S
is a special wrapping paper of hydrophobic finish for use in steam, gas and gamma-ray sterilization. Its specific pore distribution and high air flow resistance ensure extremely safe storage properties. The material is available in creped surface finish. Produced in accordance with DIN EN 868-1 and DIN EN 868-2. Regular supervision by an independent test institute guarantees a consistently high quality standard. Grade: 363 – 60 g/m2 • Colours: white, green and blue • for autoclaves (steam sterilization) • for drying ovens up to 180°C
Advantages: Protects against contamination after sterilization When accurately wrapped and stored, the sterility of goods is guaranteed for six months.
Regularly controlled by an accredited, independent institute Rolls Rolls
Width mm
Length m
2
500
100
carton
1
600
100
carton
1
750
100
carton
1
1000
100
carton
P R O T E C T I O N A N D S T E R I L I Z AT I O N PA P E R S
Sterilization paper
Packing
Sheets Sheets
Size mm
Packing
500
400 x 400
carton
500
450 x 450
carton
500
500 x 500
carton
500
600 x 600
carton
250
750 x 750
carton
250
800 x 800
carton
250
900 x 900
carton
250
1000 x 1000
carton
125
1200 x 1200
carton
Available in rolls and sheets.
31
P R O T E C T I O N A N D S T E R I L I Z AT I O N PA P E R S
Covers and protection papers Creped paper and creped paper... There is a difference Therefore...
Medicrepe Grade: 326 – 65 g/m2 • guaranteed wood-free • highly absorbent • wetstrengthened Wherever high hygienic levels are a necessity: • pure, bleached cellulose • skin-friendly • protection against humidity and dirt • protection against contamination • extremely strong User-orientated applications: • underlay for sterile instruments • cover for operation tables, examination chairs and stretchers • covers for stretchers in resting rooms after medical treatment • available in rolls and sheets for all commercially available chairs and stretchers.
Rolls
Sheets Width mm
Length mm
Width mm
Length m
450
800
390
40
450
1200
440
40
630
800
500
40
630
1200
550
40
590
40
• folded to 20 cm width 50 pcs. per pack • perforation interval 30 cm also available without perforation
For ordering information please refer to the enclosed register.
32
Semicrepe Grade: 376 – 50 g/m2 a perfect lightweight alternative • price-worthy on high quality level • ecological because produced mainly from recycled raw materials from our own production • helps reducing waste
Sheets A quality that convinces: • by stability • by extremely high burst and tear resistance
Width mm
Length mm
Pack Size
360
360
1000
400
400
1000
Particularly safe in case of uncontrolled movements of children and adults.
Mediline-covers Mediline-covers have been designed especially for gynecological examination chairs. This creped and very absorbent paper is • wetstrengthened • environmentally friendly • kind to skin
Rolls Width mm
Length m
Pack Size
Core mm
390
50
6
35
440
50
6
35
500
50
6
35
550
50
6
35
590
50
6
35
600
195
2
50
The covers maintain their strength even when wet. Grade: 326 – 65 g/m2 Also available in a coated version, grade 1371.
P R O T E C T I O N A N D S T E R I L I Z AT I O N PA P E R S
Economical and ecological, therefore...
Sheets Width mm
Length m
Pack Size
500
400
400
33
P R O T E C T I O N A N D S T E R I L I Z AT I O N PA P E R S
Dental papers Dental tray papers For modern dentist practices. The ideal tray to protect your instruments. Also suitable as absorbent tray cover during sterilization. • wetstrengthened instrument protection • environmentally friendly • hydrophobic or hydrophilic • suitable for steam, gas, gamma and hot air sterilization Available in creped and embossed finish. We can also supply the double size of 280 x 360 mm.
Grade
Basis Weight
Finish
g/m2
Sheets/Pack
mm
327
55
creped, hydrophilic
180 x 280
250
1357
90
embossed, hydrophilic
180 x 275
250
363
60
creped, hydrophobic
180 x 280
250
Finish: white, creped and embossed. 250 trays to a shrinkpack
Dental napkins • creped (376) and coated on one side (1371) for protection of patients and clothing Grade: 376 – 50 g/m2 1371 – 82 g/m2
Standard sizes in mm 360 x 360
400 x 400
Other sizes available upon request.
For ordering information please refer to the enclosed register.
34
Sizes
SPECIAL PRODUCTS SPECIAL PRODUCTS
ECG contact paper Grade: 385/NA – 150 g/m2 For an improved conductivity and an extremely reliable electro-cardiographic transmission. Our ECG contact paper has been soaked in sodium chloride. Available in discs and rectangular cuttings:
Configuration
Sizes mm
Pack Size
Ø 25 Ø 35
100 100
50 x 60 50 x 100
100 100
round cuttings
Container filters from sterilization paper Quality Control according to DIN EN 868-2 and DIN EN 868-1 Grade: 363 – 60 g/m2 • • • • • •
storage safe environmentally friendly hydrophobic plain or creped colour: white and green suitable for steam, gas and gamma sterilization
Upon request, we can supply the container filters with steam indicator.
Configuration
Sizes mm
angular
230 x 230
with rounded angles
230 x 230
round
Ø 190/6
For ordering information please contact our office.
35
SPECIAL PRODUCTS
Filter rings for freezing Point Osmometer Grade: 11/N – 80 g/m2 • white, highly absorbent, plain filter paper • apparatus-specific configuration and hole arrangement
Protection filter for DNA-extraction Grade: 37/N – 135 g/m2 Filter paper with 96 holes to prevent liquid exchange between individual cavities. Size: 80 x 123 mm
For ordering information please contact our office.
36
Sterilizator control
by
SPECIAL PRODUCTS
Guide for handling sterile goods Bowie-Dick-Test
Test Packs made of filter board Grade: 1339 – 315 g/m2 • more critical than cotton cloths as the defined pore structure guarantees the uniform penetration of the steam • lower risk of wrong indications due to lateral steam penetration
Test passed
Test failed
Example for an indicator sheet with overall colour change:
Example for an indicator sheet with no colour change in the central areas:
Conclusion: The Bowie-Dick-Test has been passed.
Conclusion: The Bowie-Dick-Test shows that the amount of gas or air in the centre was too low. The Bowie-Dick-Test has not been passed.
Available in cuttings for test packs or in large sheets.
CYTOCENTRIFUGATION Cyto-Strips made of Filter Board for single chambers and multiple chambers
Grade
Basis Weight g/m2
431 ZY
500
151
460
C 450
450
1268
510
available in different filter board grades, sizes and configurations.
Single chamber
Multiple chamber
Centrifugal rotor
37
SPECIAL PRODUCTS
Neonatal screening with sample carrier papers TFN The carrier material TFN consists of highly pure cotton linters. This ensures that the test results are not affected. Those parameters of this products that are essential for its end use are subject to permanent quality control. TFN can be imprinted as test cards according to our customers‘ requirements.
Guthrie-Test Cards MUNKTELL supplies the test cards needed for blood tests. These individual test cards correspond in both print and quality to the particular regulations of every federal state.
Properties • highly absorbent, uniform absorbency across the whole test card area • uniform thickness • highly pure, no contents that could be washed out
Typical Applications TFN is used for the collection and transport of human body liquids; capillary blood, also urine and saliva. It is used: • to effect screening tests for hereditary diseases • to detect metabolic diseases such as phenylalanin (Guthrie-Prick-Test) and inborn hypothyreosis (TSH-test) • in automatic test systems
Grade
Basis Weight
Thickness
Capillary Rise
g/m2
mm
mm/10min
180
0.44
120
TFN
Special Features approved acc. to NCCLS *
Technical data Mean Blood Spot Diameter
16 mm/100 µl**
Mean serum volume
1,30 µl/3 mm Loch**
** Above data are typical test values. They do not represent a product specification
Ordering Information Size mm
Number of Circles
Packing Size pcs./pack
67 x 120
9, printed on front
100
and back 460 x 570
without print
210 x 297 (A4)
without print
100
For ordering information please contact our office.
38
* National Committee for Clinical Laboratory Standards, Villanova, PA, USA, Document LA4-Ar 1997
Art.No.
Grade/Code/Type
Housing/Size (mm)
Box
Description
302 001
MS/20
Polystyrene
25
HEPA Venting filters; Retention (%-0,3µ) 99,999 - Non Sterile
302 002
MS/20/GS
Polystyrene
50
Sterile Venting filters; Retention (%-0,3µ) 99,999 - Sterile
303 811
Pumpgard
64
3
PTFE Venting Filters - Sterile
304 001
MS/40
Polystyrene
50
HEPA Venting filters; Retention (%-0,3µ) 99,999 - Non Sterile
304 002
MS-40/GS
Polystyrene
20
Sterile Venting filters; Retention (%-0,3µ) 99,999 - Sterile
304 101
MS-41
Polystyrene
50
HEPA Venting filters; Retention (%-0,3µ) 99,999 - Non Sterile
304 106
MS-41-T
Polystyrene
50
HEPA Venting filters; Retention (%-0,3µ) 99,999 - Non Sterile
304 107
MS-42-T
Polystyrene
50
HEPA Venting filters; Retention (%-0,3µ) 99,999 - Non Sterile
304 108
MS-43-T
Polystyrene
50
HEPA Venting filters; Retention (%-0,3µ) 99,999 - Non Sterile
304 301
MS-40-S
Polystyrene
50
HEPA Venting filters; Retention (%-0,3µ) 99,999 - Non Sterile
305 001
Suctogard
Polystyrene
50
HEPA Venting filters; Retention (%-0,3µ) 99,999 - Non Sterile
306 101
MS-61
Polystyrene
25
HEPA Venting filters; Retention (%-0,3µ) 99,999 - Non Sterile
306 102
MS-61/GS
Polystyrene
25
HEPA Venting filters; Retention (%-0,3µ) 99,999 - Sterile
306 401
MS-64/GS
Polystyrene
25
HEPA Venting filters; Retention (%-0,3µ) 99,999 - Sterile
306 402
MS-64
Polystyrene
25
HEPA Venting filters; Retention (%-0,3µ) 99,999 - Non Sterile
320 002
CMS-681/GS
Polystyrene
10
HEPA Venting filters; Retention (%-0,3µ) 99,999 - Sterile
321 001
LP-025
Polystyrene
50
HEPA Venting filters; Retention (%-0,3µ) 99,999 - Non Sterile
321 101
Combigard
Polystyrene
270
HEPA Breathing System Filter-humidifier; VFE/BFE (%) 99,9999) - Non Sterile
321 111
Gard
Polystyrene
270
HEPA Breathing System Filter; VFE/BFE (%) 99,9999) - Non Sterile
321 201
Bacstop/HME
Polystyrene
270
Breathing System Filter-humidifier; VFE/BFE (%) 99,99) - Non Sterile
321 203
Bacstop
Polystyrene
270
Breathing System Filter; VFE/BFE (%) 99,99) - Non Sterile
321 302
HME1000
Styrene-Butadiene
900
Humidifier, - Non Sterile
321 304
HME Flex
EVA
450
Humidifier, - Non Sterile
321 305
Neo-Gard
Styrene
2880
Humidifier neonatal, - Non Sterile
321 307
Trachgard-HC
Polystyrene
450
Humidifier, - Non Sterile
321 308
HME Flex Mini
EVA
450
Humidifier, - Non Sterile
321 402
Flex Soft
EVA/Styrene
900
Catheter mount. - Non Sterile
321 403
Flex Straight
EVA/Polyethylene
Catheter mount. - Non Sterile
321 404
Flex Elbow
EVA/Polyethylene
Catheter mount, elbow. - Non Sterile
321 405
Mask Elbow with port
EVA/Polyethylene
Mask elbow with port, - Non Sterile
321 406
Mask Elbow w/o port
EVA/Polyethylene
Mask elbow without port, - Non Sterile
321 407
Circuit Adult 750
EVA/Polyethylene
Circuit Adult 750 mm, - Non Sterile
321 408
Circuit Adult 1500
EVA/Polyethylene
Circuit Adult 1500 mm, - Non Sterile
321 409
Circuit Paediatric 750
EVA/Polyethylene
Circuit Paediatric 750 mm, - Non Sterile
321 410 Circuit Paediatric 1000
EVA/Polyethylene
REGISTER
Article number register
Circuit Paediatric 1000 mm, - Non Sterile
322 001
LP-050
Polystyrene
50
HEPA Venting filters; Retention (%-0,3µ) 99,999 - Non Sterile
323 001
Virogard
Polystyrene
50
HEPA Venting filters; Retention (%-0,3µ) 99,996 - Non Sterile
323 202
Bactogard
Polystyrene
50
HEPA Venting filters; Retention (%-0,3µ) 99,99 - Non Sterile
324 001
LP-10-38
Polystyrene
1
HEPA Venting filters; Retention (%-0,3µ) 99,999 - Non Sterile
324 003
LP-10-80
Polystyrene
1
HEPA Venting filters; Retention (%-0,3µ) 99,999 - Non Sterile
326 000
Lasertrap
Polystyrene
1
HEPA Venting filters; Retention (%-0,3µ) 99,999 - Non Sterile
350 000
Connection LFI
Nickel plated brass
1
Connector, Non - Sterile
350 002
Connect. LSL 1 1/4
Nickel plated brass
1
Connector, Non - Sterile
350 004
Connect. LKR 3/4
Nickel plated brass
1
Connector, Non - Sterile
350 005
Connection FI
Nickel plated brass
1
Connector, Non - Sterile
350 007
Connect. SL 1 1/4
Nickel plated brass
1
Connector, Non - Sterile
350 009
Connect. KR 3/4
Nickel plated brass
1
Connector, Non - Sterile
351 001
Connector R 3/8 "
ABS
50
Connector, Non - Sterile
351 002
Connector R 1/2"
ABS
50
Connector, Non - Sterile
354 301
Connection.Male
Polystyrene
1
Connector, Non - Sterile
354 302
Connection.Female
Polystyrene
1
Connector, Non - Sterile
391 000
363
400 x 400
500
Sterilization paper, sheets - white creped
39
REGISTER 40
Art.No.
Grade/Code/Type
Housing/Size (mm)
Box
Description
391 001
363
450 x 450
500
Sterilization paper, sheets - white creped
391 002
363
500 x 500
500
Sterilization paper, sheets - white creped
391 003
363
600 x 600
500
Sterilization paper, sheets - white creped
391 004
363
750 x 750
250
Sterilization paper, sheets - white creped
391 005
363
800 x 800
250
Sterilization paper, sheets - white creped
391 006
363
900 x 900
250
Sterilization paper, sheets - white creped
391 007
363
1000x1000
250
Sterilization paper, sheets - white creped
391 008
363
1200x1200
125
Sterilization paper, sheets - white creped
391 009
363
400 x 400
500
Sterilization paper, sheets - green creped
391 010
363
450 x 450
500
Sterilization paper, sheets - green creped
391 011
363
500 x 500
500
Sterilization paper, sheets - green creped
391 012
363
600 x 600
500
Sterilization paper, sheets - green creped
391 013
363
750 x 750
250
Sterilization paper, sheets - green creped
391 014
363
800 x 800
250
Sterilization paper, sheets - green creped
391 015
363
900 x 900
250
Sterilization paper, sheets - green creped
391 016
363
1000x1000
250
Sterilization paper, sheets - green creped
391 017
363
1200x1200
125
Sterilization paper, sheets - green creped
391 100
363
50cmx100m
2 Rolls
391 102
363
75cmx100m
1 Roll
Sterilization paper, rolls, white creped
391 104
363
50cmx100m
2 Rolls
Sterilization paper, rolls, green creped
391 105
363
60cmx100m
1 Roll
Sterilization paper, rolls, green creped
391 106
363
75cmx100m
1 Roll
Sterilization paper, rolls, green creped
391 107
363
100cmx100m
1 Roll
Sterilization paper, rolls, green creped
392 000
325
39cmx40m
6 Rolls
Medical paper, rolls, Medicrep
392 001
325
44cmx40m
6 Rolls
Medical paper, rolls, Medicrep
392 002
325
50cmx40m
6 Rolls
Medical paper, rolls, Medicrep
392 003
325
55cmx40m
6 Rolls
Medical paper, rolls, Medicrep
392 004
325
59cmx40m
6 Rolls
Medical paper, rolls, Medicrep
392 100
326
450x800
250
Medical paper, sheets, Medicrep
392 101
326
450x1200
250
Medical paper, sheets, Medicrep
392 102
326
630x800
250
Medical paper, sheets, Medicrep
392 103
326
630x1200
250
Medical paper, sheets, Medicrep
393 000
376
39cmx50m
6 Rolls
Medical paper, rolls, Semicrep
393 001
376
44cmx50m
6 Rolls
Medical paper, rolls, Semicrep
393 002
376
50cmx50m
6 Rolls
Medical paper, rolls, Semicrep
393 003
376
55cmx50m
6 Rolls
Medical paper, rolls, Semicrep
393 004
376
59cmx50m
6 Rolls
Medical paper, rolls, Semicrep
393 005
376
60cmx195m
2 Rolls
Medical paper, rolls, Semicrep
394 000
385NA
25
100 x 100
Medical paper - ECG Contact paper
394 001
385NA
35
100 x 100
Medical paper - ECG Contact paper
394 002
383NA
50 x 60
100 x 100
Medical paper - ECG Contact paper
394 003
385NA
50 x 100
100 x 100
Medical paper - ECG Contact paper
Sterilization paper, rolls, white creped
394 100
363
23 x 23 cm
500
Medical paper - Containerfilter
394 101
363
23x23cmRE
500
Medical Paper - Container
394 102
363
190
500
Medical Paper - Container
394 200
325
500x400
400
Medical paper - Overlays paper
395 001
326
180 x 280
1000
Dental paper - Tray
395 002
1357
180 x 275
250
Dental paper - Tray
395 003
363
180 x 280
1000
Dental paper - Tray
396 001
376
400 x 400
1000
720 200
VPT-26-0.20-50-LL-S
26
50
PTFE Venting Filters - Sterile, Single pack
720 201
VPT-26-0.20-500-LL
26
500
PTFE Venting Filters - Non Sterile, Single pack
Dental paper - Napkins
Dystrybucja:
Atut Sp. z o.o. ul. B. Prusa 8; 20-064 Lublin tel./fax: 081 747 43 53 e-mail:
[email protected] www.atut.lublin.pl
Atut Sp. z o.o. ul. B. Prusa 8; 20-064 Lublin tel./fax: 081 747 43 53 e-mail:
[email protected] www.atut.lublin.pl
Printing: Intellecta Strålins 0610.
Dystrybucja: