Professional Drive Technology Motors w Drives w Controls
Slip Rings
Series SRC
www.servo-drive.com
[email protected]
Slip Rings Series SRC Slip Rings can be used in any system requiring the transmission of electrical and/or power signals to an intermittently or continuously rotating shaft. Thanks to the small ring diameter, the SRC Series grants low peripheral speed between brushes and rings, as well as reduced dynamic imbalance what means very low wear. Moreover, the use of noble metals (gold to gold alloy) assures long lasting using life, reduced noises and interferences between circuits, low friction torque. The above features make the SRC Series specially suited to transmission of critical signals, such as high frequency signals (video, field buses, etc.), very low currents and voltages (strain gages, thermocouples, measuring equipment etc.), even if versions with up to 6A circuits are available. Conceived to deliver a flexible, cost-effective, reliable and hi-quality solution, these units are available in many standard configurations and with 6 to 56 circuits. Their compact size allows installation into small systems thus requiring high performances. The SRC Series can easily meet the needs of particular applications and also be customized on demand (connectors, cables length, special cables, number of circuits, etc.).
Standard applications • • • • •
Video systems Robots and down hole inspection equipment Manufacturing and process control equipment Medical equipment Packaging machines
Standard features
2
• •
Voltage: Cables:
• • • • • • • • • •
Cable length: Dielectric strength: Insulation resistance: Noise: Nominal speed: Temperature: Bearings: Mounting Contact: Rating life:
•
Protection:
www.servo-drive.com
240 VDC / 240 VAC max silver plated - PTFE insulation and color coded 6A: AWG18; 2A: AWG26 or AWG28 300 mm. standard (other lengths on demand) 500 VAC at 60 Hz > 1000 M / 500 Vcc < 100 m at 6 Vcc and 50 mA (at 5 rpm) 250 rpm (for higher speed up to 600 rpm/min please contact us) -20°C to +80°C miniature, precision ball bearings method: standard flange gold to gold 108 revolutions (depending on speed and on enviromental conditions) IP 51
[email protected]
Miniature Slip Rings SRC Series • • • • • • • • • •
Compact size Quick delivery Low cost Ideal for video and digital signals Gold alloy rings and brushes High reliability and duration Can be easily customized for special applications Some versions available with power circuits Low friction torque Smooth rotation
012A-6-AB**
Number of circuits x current (A) 6x2A -
012A-12-AB**
12x2A
-
12,5
27
2.8
-
4
“
022- 6-AB
6x2A
-
22
19
9*
5
7,8
“
022-12-AB
12x2A
-
22
28
9*
5
7,8
“
022-15-AB
15x2A
-
22
30
3
5
7,8
“
022-18-AB
18x2A
-
22
34
9
5
7,8
“
022-24-AB
24x2A
-
22
42
3
5
7,8
“
022-15-AL
15x2A
-
22
30
3
5
7,8
Aluminum
022-18-AL
18x2A
-
22
34
9
5
7,8
“
022-24-AL
24x2A
-
22
42
3
5
7,8
“
025-30-AL
30x2A
-
25
59
9
3,5
9,8
“
025-46-AL
46x2A
-
25
83
9
3,5
9,8
“
025-56-AL
56x2A
-
25
98
9
3,5
9,8
“
025-18+ AL
18X2A 4X6A
25
59
9
3,5
9,8
“
025-24+ AL
24X2A 4X6A
25
68
9
3,5
9,8
“
Model SRC-
Outside Length diameter “L” (mm) (mm) 12,5 17
“A” (mm)
“B” (mm)
“C” (mm)
Housing
2.8
-
4
ABS (Hard plastic)
* 3 mm option ** Option without flange Note: Models SRC 012A and SRC 025-56-AL have AWG28 cables
Order Code
SRC 012 - 06 - AL - XXX
Motor Series
Customization
SR = Slip Rings
000 = Standard
C = C Series
Housing
Size
AL = Aluminium Housing
Size 012, 022 and 025
AB = Hard Plastic
Number of circuits 06 = Standard
www.servo-drive.com
[email protected]
3
Standard SRC 012A
Dimensions (mm)
Standard SRC 022
Dimensions (mm)
Standard SRC 025
Dimensions (mm)
Other models available SRT Series
4
www.servo-drive.com
SRC Series
Special
[email protected]
Professional Drive Technology Motors w Drives w Controls
Slip Rings
Series SRH
www.servo-drive.com
[email protected]
Slip Rings SRH Series • • • • • • • •
Commercial slip rings Quick delivery Low cost Plenty of con gurations available Signal and power circuits Compact sizeLow friction torque High reliability and duration Smooth operation
Slip rings can be used in any electromechanical system requiring unrestrained, continuous rotation while transmitting power and/or data from a stationary to a rotating structure. A slip ring is also called rotary electrical interface, collector, swivel or rotary joint. The SRH Series make use of a special technology allowing to get multiple contact points between brushes and ring, low friction torque, reduced mechanical noise and low wear. No lubrication required.
Standard applications • • • • • • •
Packaging machines Labelling machines Filling machines Robots Medical equipment Rotary tables and machine tools Converting machines
Standard features Voltage:
240 VAC / 340 VDC*
Cables:
Tin plated, PTFE insulation 0A = AWG16; 8A = AWG18; 5A = AWG20; 3A = AWG22; 2A = AWG26; 1A = AWG28
Cables length:
500 mm standard (other lengths available on demand)
Dielectric strength:
1000 VAC at 60 Hz
Insulation resistance:
> 1000 M / 500 VDC
Bearings:
stainless steel and nylon
Housing
ABS (hard plastic)
Temperature:
-20°C to +80°C
Protection:
IP 51
*Higher voltages available as option
2
www.servo-drive.com
[email protected]
Model
Inside diameter “B” (mm)
Outside diameter “D” (mm)
Nbr. of circuits
Length “L” (mm) *
Max. speed rpm
Current (A)
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 90 100 110 120 130 140 150 160 170 180 190 200
55 60 70 70 95 110 110 120 120 120 124 124 140 150 150 170 180 190 200 220 230 240 258 260 270 280 390
1-36 1-36 1-40 1-40 1-40 1-40 1-50 1-50 1-50 1-50 1-60 1-60 1-60 1-60 1-72 1-72 1-80 1-80 1-96 1-96 1-96 1-110 1-110 1-110 1-124 1-124 1-124
29.5+nx3 29.5+nx3 29.5+nx3 29.5+nx3 29.5+nx3 29.5+nx3 40.5+nx3.5 40.5+nx3.5 40.5+nx3.5 40.5+nx3.5 40.5+nx3.5 40.5+nx3.5 43.5+nx3.5 46.5+nx3.5 46.5+nx3.5 59+nx5 59+nx5 61+nx5 63+nx5 65+nx5 67+nx5 69+nx5 73+nx5 73+nx5 75+nx5 75+nx5 79+nx5
300 300 300 300 250 250 250 250 250 250 250 250 250 250 250 250 250 200 200 200 200 200 150 150 150 150 150
1-5 1-5 1-5 1-10 1-10 1-10 1-10 1-10 1-10 1-10 1-10 1-10 1-10 1-10 1-10 1-10 1-10 1-10 1-10 1-10 1-10 1-10 1-10 1-10 1-10 1-10 1-10
SRH 010 SRH 015 SRH 020 SRH 025 SRH 030 SRH 035 SRH 040 SRH 045 SRH 050 SRH 055 SRH 060 SRH 065 SRH 070 SRH 075 SRH 080 SRH 090 SRH 100 SRH 110 SRH 120 SRH 130 SRH 140 SRH 150 SRH 160 SRH 170 SRH 180 SRH 190 SRH 200
n = number of circuits: rough formula for 5A circuits Note: 1-2-3-5-8-10A circuits available
Standard SRH
www.servo-drive.com
(Dimensions in mm)
[email protected]
3
Slip Rings SRH 1254 Series
Slip rings can be used in any electromechanical system requiring unrestrained, continuous rotation while transmitting power and/or data from a stationary to a rotating structure. A slip ring is also called rotary electrical interface, collector, swivel or rotary joint. The SRH 1254 Series make use of a special technology allowing to get multiple contact points between brushes and ring, low friction torque, reduced mechanical noise and low wear. No lubrication required.
Standard application
4
•
Packaging machines
•
Automatic machines
•
Manufacturing and process control machines
•
Robots
•
Medical equipment
•
Rotary tables and machine tools
•
Converting machines
•
Cable winders
www.servo-drive.com
[email protected]
Standard Features Number of circuits:
6, 12, 18, 24
Current:
power 5A: AWG20
Voltage:
250 VAC / DC (for higher voltages please contact us)
Cables:
silver plated, PTFE insulation / colour coded
Cable length:
500 mm standard (other lengths on demand)
Dielectric strength:
500 VAC at 60 Hz
Insulation resistance:
> 1000 M / 500 VDC
Nominal speed:
0 to 250 rpm. (for higher speeds please contact us)
Bearings:
stainless steel
Housing:
ABS (hard plastic)
Temperature:
-20°C to +80°C
Protection:
IP 51
Model
Outside Length “L” (mm)
Rings
SRH 1254-6
33,8
6
SRH 1254-12
47,0
12
SRH 1254-18
60,2
18
SRH 1254-24
73,4
24
Dimensional Drawings SRH 1254 Series
www.servo-drive.com
[email protected]
5
Slip Rings SRH 3899 Series
Slip rings can be used in any electromechanical system requiring unrestrained, continuous rotation while transmitting power and/or data from a stationary to a rotating structure. A slip ring is also called rotary electrical interface, collector, swivel or rotary joint. The SRH 3899 Series make use of a special technology allowing to get multiple contact points between brushes and ring, low friction torque, reduced mechanical noise and low wear. No lubrication required.
Standard applications
6
•
Packaging machines
•
Labelling machines
•
Filling machines
•
Robots
•
Medical equipments
•
Rotary tables and machine tools
•
Converting machines
www.servo-drive.com
[email protected]
Standard features Number of circuits:
6, 12, 18, 24, 36, 48
Current:
power 10A: AWG16 / Signals 2A: AWG26
Voltage:
power 440 VAC / VDC - Signals: 240 VAC / VDC
Cables:
tin plated, Insulation PTFE 4 cable outputs: 6 x AWG16 or 12 x AWG26 ea.
Cables length:
standard 500 mm (other lengths on demand)
Dielectric strength:
500 VAC at 60 Hz
Insulation resistance:
> 1000 M / 500 VDC
Nominal speed:
0 to 250 rpm (for higher speeds please contacts us)
Bearings:
stainless steel and nylon
Housing:
ABS (hard plastic)
Temperature:
-40°C to +80°C
Protection:
IP 51
Outside Length “L” (mm)
nbr. of circuits Power (10A)
nbr. of circuits Signal (10A)
SRH 3899-6P
54,1
6
-
SRH 3899-12S
54,1
-
12
SRH 3899- 12P
77,9
12
-
SRH 3899-6P/12S
77,9
6
12
SRH 3899- 24S
77,9
-
24
SRH 3899- 18P
101,7
18
-
SRH 3899- 12P/12S
101,7
12
12
SRH 3899- 6P/24S
101,7
6
24
SRH 3899- 36S
101,7
-
36
SRH 3899- 24P
125,7
24
-
SRH 3899- 18P/12S
125,7
18
12
SRH 3899- 12P/24S
125,7
12
24
SRH 3899- 6P/36S
125,7
6
36
SRH 3899- 48S
125,7
-
48
Model
www.servo-drive.com
[email protected]
7
Dimensional Drawings SRH 3899 Series
SRH 1254 - 6P - (12S) - XXX
Order Code : Series :
Customization :
SR = Slip Rings
000 = Standard
H = H Series
*Nbr of signal circuit
Size :
*12 = Standard (3599 only)
1254 = in 12 mm; out 54 mm
Nbr of power circuits
3899 = in 38 mm; out 99 mm
06 = Standard
Other models available:
SRT Series
8
www.servo-drive.com
SRC Series
[email protected]