CYTEC.COM
Composite Materials for
Automotive Applications Lightweight, High-Performance, Cost-Effective Solutions
© Delta Motorsport Ltd.
CYTEC INDUSTRIES | INDUSTRIAL MATERIALS
By helping to make vehicles lighter, safer, cleaner and more cost effective, Cytec Industrial Materials is responding to the needs and expectations of the vehicle original equipment manufacturers (OEMs), system suppliers and the consumers. Cytec Automotive technologies help manufacturers meet increasingly strict environmental standards, supporting responsible development and progress. Lighter, less polluting and more fuel-efficient vehicles A world leader in composite materials for vehicle body in white (BIW) structure, Cytec proactively develops innovative and class-leading material systems for Automotive OEMs and their supply chain, creating solutions for weight and emission reduction, recyclability and pedestrian protection.
Cytec, the partner of choice for the Automotive market The Automotive industry faces many challenges; from improving energy efficiency, to reducing vehicle emissions, to increasing durability and appeal at reduced programme cost. Cytec’s material science, composite and Automotive experts work with you to address these tough challenges and to create and refine, industry-leading solutions of the highest and safest standard. Whether your goal is to reduce the BIW mass or the interior noise of a passenger car, Cytec works collaboratively to deliver the optimum solution, every time: • Lightweight, high-performance, cost-effective, multi-material solutions • Materials for BIW structures, high temperature and impact applications, body panels and visual components
• Industry leading snap cure resin systems for matched die processing • Compatible surfacing films • Carbon Fibre • Strategic collaborations with OEMs and Tier 1 • Working with the whole supply chain
• Automation systems and processes
Cytec’s unique high volume application development, materials and process development centre offers real advantage to our customers.
© Koenigsegg Automotive AB
Typical serial automotive car
Structural and cosmetic applications on the Koenigsegg Agera R
HIGH PERFORMANCE AUTOMOTIVE Cytec is the leading supplier for high-performance automotive offering: • Lightweight, high-performance, cost-effective, multi-material solutions • Surfacing films & fast cure resin systems for press, traditional vacuum bag and autoclave processing • Focussed on developing automation-ready materials and processes • Materials for primary and secondary structures, high temperature and impact applications, body panels and visual components • Strategic collaborations with Tier 1 & OEMs • Working with the whole supply chain • Unique high volume application, materials and process development centre offering real advantage to our customers
Cytec Offers • Accredited quality assurance • Thermoset prepregs • Complete composite materials characterisation capability, including mechanical testing, CAI FMBAI, TMA, Rheology, DSC, C-Scan, image analysis • JIT delivery to agreed schedules • A range of materials’ presentation formats • In-house prototype and production development capability with CAD and FEA facilities, composites design engineering and design for manufacture, laminating analysis and process development
Composite applications on the Corvette Stingray
• Experienced Automotive project engineers and laminators
Process Materials
Composite Tooling
Cytec offers a comprehensive range of composites processing materials and consumables optimised for the highperformance Automotive market. Cytec supports its customers by providing tailor-made kitted solutions which offer time and cost savings through excellent process repeatability and reduced wastage.
Cytec innovation extends to providing a complete solution to the customer part manufacturing experience. As such, we not only offer the structural materials and their process consumables, but also a complete range of composite tooling solutions. Our tooling prepregs offer outstanding surface finish and longevity for the manufacture of complex mould tools. Our design service can support tool design optimisation to ensure a fit-for-purpose solution. In addition we offer soft tooling technology including reusable vacuum bags, integral heater blankets, intensifiers and caul sheets. For all the details on our tooling offer, refer to the Tooling brochure or visit www.cytec.com.
Our broad expertise in the development of single-use tailored vacuum bags through to reusable vacuum systems, including standard and heated bag solutions, has enabled us to provide innovative curing technology to support autoclave and oven vacuum bag prepreg moulding. These systems offer reduced costs by lowering cycle times and energy consumption.
AUTOMOTIVE APPLICATIONS
Composite Materials Product Selector Guide for High-Performance Automotive Engine bay
TRIM Body Panels
High temp’
Secondary
STRUCTURE
PHYSICAL PROPERTY GUIDES
CYCOM® 977-6
Press/Autoclave
311 (155)
high
low
CYCOM® 2020
Press/Autoclave
356 (180)
medium
high
Press/Vacuum/Autoclave
374 (190)
low
high
MTM® 28
Press/Autoclave
212 (100)
high
high
MTM® 58B and FRB
Press/Autoclave
284 (140)
low
medium
MTM® 71
Press/Autoclave
311 (155)
low
high
Autoclave
421 (216)
high
medium
Press/Autoclave
428 (220)
medium
medium
Autoclave
550 (288)
medium
medium
Vacuum
410 (210)
low
low
HTM® 556
Autoclave
518 (270)
low
low
MTM® 228
Press/Autoclave
248 (120)
high
high
LTM® 26/ LTM® 26EL
Press/Autoclave
464 (240)
medium
medium
Vacuum
257 (125)
medium
medium
Press/Autoclave
230 (110)
medium
medium
BPS240 format 1
Vacuum/Autoclave/Press
325 (163)
medium
medium - high
BPS240 format 2
Autoclave
325 (163)
medium
medium - high
FM® 202 (surface film)
Press/Autoclave
257 (125)
n/a
-
Surface Master® 905
Press/Autoclave
277 (136)
n/a
low
Interior
Viscosity
Exterior
Toughness
Impact
Tg (DMA Onset) ºF (ºC)
Primary
Processing
MTM® 49-3
CYCOM® 2040 CYCOM® 997 CYCOM® 5250-4 LTM® 45
LTM® 24ST MTM® 57
Process Materials Product Selector Guide Prepreg product °F (°C)
Bagging film
Release film
Sealant tape
Peel ply
Breather
Flash tape
250 (120) Epoxy OOA
HS8171 VF450V
A5000 A6200
UCS180
A100 B100
AB100 AB10
FT1
250 (120) Epoxy in-autoclave
HS8171 VF450V
A5000 A6200
UCS180
A100 B100
AB100 AB10
FT1
350 (180) Epoxy OOA
HS8171 VF800G SV3000
A5000 A6200
SM5142
A100 B100
AB100 AB10
FT1
350 (180) Epoxy in-autoclave
HS8171 VF800G SV3000
A5000 A6200
SM5142
A100 B100
AB100 AB10
FT1
SERIAL PRODUCTION AUTOMOTIVE Cytec leads the way in the provision of composite materials and technologies for structural applications and bodywork in the Automotive industry. Cytec continues to refine and expand its portfolio of rapid cure thermoset prepregs and High Pressure Resin Transfer Moulding (HP RTM) resins, to support the expanding needs of the Automotive market. Cytec is strategically focused on supporting the drive for lightweight, cost-effective, multi-material vehicle solutions. We offer OEMs and Tier 1 suppliers a unique combination of materials, manufacturing process innovation, prototype support and application development capabilities.
Cytec Offers • Snap cure thermoset prepreg systems • HP RTM • Recycled thermoset material • Eco Materials • Automation and “touch-less” manufacturing technologies • Carbon fibre High volume serial Automotive applications require matched die processing solutions for optimum part manufacturing efficiency. Cytec Automotive materials are designed for these processes, and provide snap cure manufacturing performance, with class leading structural and cosmetic performance, across the range of Automotive applications. “Touch-less” manufacturing
Composite Materials Product Selector Guide for Serial Production Automotive TRIM Body Panels
High temp’
Secondary
STRUCTURE
PHYSICAL PROPERTY GUIDES
Press/Autoclave
284 (140)
medium
CYCOM® 2020
Press/Autoclave
356 (180)
medium
CYCOM 997
Press/Autoclave
428 (220)
medium
HP RTM
284 (140)
medium
MTM 54FRB
Press/Autoclave
302 (150)
low
MTM® 57
Press/Autoclave
230 (110)
medium
MTM 228
Press/Autoclave
248 (120)
high
CYCOM® 759F
Press/Autoclave
212 (100)
low
LTM 26/LTM 26EL
Press/Autoclave
248-257 (120-125)
medium
MTM® 23*
Press/Autoclave
170 (77)
medium
FM 202 (surface film)
Press/Autoclave
257 (125)
n/a
®
XMTR 50 (EF7313) ®
®
®
®
* glass fibre only
®
Interior
MTM® 58B and FRB
Exterior
Toughness
Impact
Tg (DMA Onset) ºF (ºC)
Primary
Processing
CYTEC.COM
COMPLETE COMPOSITES PORTFOLIO Suitable for low cost vacuum bag processing, excellent surface finish, ease of use with a broad processing window, good combination of mechanical performance, fatigue resistance and toughness, and supplied across a wide range of fabrics and fibres. Resin chemistries include epoxies, phenolics, vinyl esters, bismaleimides, thermoplastics, cyanate esters, HT polyimides, polyesters, ceramics.
Carbon Fibers: Standard modulus, intermediate modulus, pitch fibres.
Epoxies, phenolics, vinyl esters, cyanate esters, bismaleimides, HT polyimides, surfacing films, structural films, bond primers, lightning strike, silicone sealants, paste/potting/foams.
Composites & Prepregs
Textiles: Standard weaves, bias weaves, internally consumed.
Carbon Fiber & Textiles
Design: Supporting tool design optimisation.
Film & Paste Adhesives
Tooling Materials: Tooling prepregs for outstanding surface finish and longevity. Tool Manufacture: Complete manufacturing service.
Ablatives, pre-forms, friction materials, cross-plied materials, high-drape formats, selective impregnation, core materials.
Specialty Products
Tooling
Reusables: Soft tooling technology including reusable bags, heater blankets, intensifiers and caul sheets.
Technical Competencies
Kitting For increased part manufacturing productivity, quality, reliability and reduced waste. From simple shapes to complex kits of any/all of our products. From CAD to fully assembled vacuum bag kits.
Process Materials
Material science, polymer chemistry, processing science, and technical service and application engineering, e.g. design assistance with resin infusion networks, design for manufacturing, crashworthiness and intrusion analysis.
Vacuum bagging films including film welding, perforating and processing, breather fabrics, peel plies, release films, flow media, release fabrics, sealants, reusable vacuum systems to suit specific tooling requirements, elastomeric tools, and design services.
Contact Information: Industrial Materials tel: +44 (0) 1773 766200 - Heanor, UK tel: +44 (0) 161 653 4876 - Manchester, UK tel: +1 (0) 918 252 3922 - Tulsa, USA tel: +86 21 64228920 - Shanghai, China
[email protected]
© 2014 Cytec Industries Inc.
Process Materials tel: +44 (0) 1274 550500 - Keighley, UK tel: +33 (0)5 61 37 89 89 - Toulouse, France tel: +39(0) 039 6892987 - Milan, Italy tel: +1 (0)562 906 3300 - Santa Fe Springs, USA tel: +86 21 64228920 - Shanghai, China
[email protected] A4 Automotive Flyer Feb-2014