QUIET POWER RELAY
1 POLE—20 A (FOR AUTOMOTIVE APPLICATIONS) FTR-P1 SERIES ■ FEATURES Original construction, where reduction of operational noise is considered when mounted on PCB, made it possible to design this quiet relay. (Average acoustic noise level: 53 dB, distance 10 cm) ● New types of materials are used for the conductive parts, allowing this compact relay to carry 20 AMP. ● Two types of contact material are available for various contact loads. ● Wider contact gap (0.6 mm) version is also available for enhanced cut-off ability to overload condition. ●
■ ORDERING INFORMATION [Example]
FTR-P1 (a)
C (b)
N 012 W1 (c) (d) (e)
-** (f )
(a)
Series Name
FTR-P1: FTR-P1 Relay
(b)
Contact Arrangement
C
: 1 form C (SPDT)
(c)
Contact Gap
N P
: 0.3 mm gap : 0.6 mm gap
(d)
Nominal Voltage
009 010 012
: 9 VDC : 10 VDC : 12 VDC
(e)
Contact Material
W1
: Silver-tin oxide-indium
(f)
Custom Designation
To be assigned for custom specification
Note: Part No. is printed on the top of relay as follows. (Example) Designation ordered: FTR-P1CN012W1 Stamp: P1CN012W1
1
FTR-P1 SERIES (QUIET TYPE) ■ SPECIFICATIONS Item Contact
DI Coil
Arrangement
1 form C (SPDT)
Material
Silver-tin oxide-indium (W1 type)
Voltage Drop (resistance)
Maximum 100 mV (at 2 A 12 VDC)
Ratings
14 VDC/20 A (locked motor load) 14 VDC/inrush 20 A, break 4 A (motor free load)
Maximum Carrying Current
20 A/ 1 hour (25°C, 100% rated coil voltage)
Maximum Inrush Current (reference)
W1 Type: 60 A
Max. Switching Current (reference)
30 A at 16 VDC
SC
Min. Switching
Time Value
Life
Load*1
(reference)
6 VDC 1 A
Operating Temperature Range
–40°C to +85°C (no frost) (reter to the CHARACTERISTIC DATA)
Storage Temperature Range
–40°C to +100°C (no frost)
Operate (at nominal voltage)
Maximum 10 ms
Release (at nominal voltage)
Maximum 5 ms
Mechanical Electrical
Other
Specifications
ON
Vibration Resistance Shock Resistance Weight
2 ×105 operations minimum (locked motor load) 4 ×105 operations minimum (motor free load)
UE
10 to 55 Hz (double amplitude of 1.5 mm)
Misoperation Endurance
TIN
1 ×107 operations minimum
100 m/s2
1,000 m/s 2 Approximately 10.0 g
D
*1 Values when switching a resistive load at normal room temperature and humidity, and in a clean environment. The minimum applicable load varies with the switching frequency and operating environment.
■ COIL DATA CHART ● 0.3 mm contact gap type MODEL
Nominal voltage
Coil resistance (±10%)
Must operate voltage
Must release voltage
FTR-P1CN009W1
9 VDC
135 Ω
5.4 V (at 20°C) 6.8 V (at 85°C)
0.7 V
FTR-P1CN010W1
10 VDC
180 Ω
6.3 V (at 20°C) 7.9 V (at 85°C)
0.8 V
FTR-P1CN012W1
12 VDC
240 Ω
7.3 V (at 20°C) 9.2 V (at 85°C)
0.9 V
W1 TYPE
(20
12
)
Thermal resistance
73°C/W
2
FTR-P1 SERIES (QUIET TYPE) ● 0.6 mm Contact Gap Type MODEL
Nominal voltage
Coil resistance (±10%)
Must operate voltage
Must release voltage
FTR-P1CP009W1
9 VDC
100 Ω
5.4 V (at 20°C) 6.8 V (at 85°C)
0.7 V
FTR-P1CP010W1
10 VDC
135 Ω
6.3 V (at 20°C) 7.9 V (at 85°C)
0.8 V
FTR-P1CP012W1
12 VDC
180 Ω
7.3 V (at 20°C) 9.2 V (at 85°C)
0.9 V
W1 TYPE
DI
SC
Thermal resistance
65°C/W
Note: Values in the table of coil resistance and must release voltage are measured at 20°C.
■ SUITABLE APPLICATION CONTACT MATERIAL
W: Silver-tin oxide-indium
ON
SUITABLE LOAD
Door lock Power window Solenoids, etc. (locked rotor)
■ CHARACTERISTIC DATA 1. MAXIMUM BREAK CAPACITY
TIN 2. LIFE
D
14 VDC Motor locked load
40 35 30
Resistive load
25
Locked motor load 20 0.3 mm gap 15 0.6 mm gap
0.3 mm gap 0.6 mm gap
12 10
Number of operations (x104)
50
Contact switching current (A)
UE
30 20 10
15 20 25 30 35 40 50 Voltage between contacts (V)
12
5
10 10
(20
)
15 20 25 30 35 404550 Locked motor current (A)
3
FTR-P1 SERIES (QUIET TYPE) 3. LIFE TEST (EXAMPLE) • Shift of pick-up drop-out voltage
• Test item 14 V DC-20 A Motor Lock 200,000 operations minimum
Percent of rated coil voltage (%)
RL-1 N.O.
DI
N.C.
M
N.O.
SC N.C. RL-2
20 sec
0A (RL-2) 20 A 0A 0.3 sec 10 sec
60 PICK-UP
40 DROP-OUT
20 0 1
ON
• Current wave form (RL-1) 20 A
80
Initial
0.3 sec
Break Make
TIN
100
10
1
N.O. N.C. M
Percent of rated coil voltage (%)
100 80 60 40
UE
10 Number of operations (x104)
100
D
• Shift of pick-up drop-out voltage
• Test circuit
100
(Measured at 6 V-1 A)
1000
Initial
• Test item 14 V DC-20 A motor free 400,000 operations minimum
10
• Shift of contact resistance Contact Resistance (mΩ)
• Test circuit
100
PICK-UP
(20
12
DROP-OUT
)
20 0
Initial
1
10
100
• Shift of contact resistance • Current wave form
(Measured at 6 V-1 A)
20 A 4A 0A 16 A
Contact Resistance (mΩ)
1000 Break Make
100
10
Initial
1
10 Number of operations (x104)
100 4
FTR-P1 SERIES (QUIET TYPE)
4. COIL TEMPERATURE RISE
5. OPERATING COIL VOLTAGE RANGE (EXAMPLE) (V) 15
Applied voltage to the coil
120
Coil temperature rise (°C)
100
80
(2) carrying current : applied coil power 10 A 0.8 W 0.6 W
DI
60
0.8 W 0.6 W (1) carrying current : applied coil power 0 A
40
SC 20 0
0
CONTINUOUSLY APPLICABLE COIL VOLTAGE RANGE
10
5
at 20˚C
–30 0 50 100 Operating temperature (˚C)
ON
10 20 30 Applied time (minutes)
6. VIBRATION RESISTANCE CHARACTERISTICS
TIN
Dual amplitude (mm)
2
Acceleration
(m/s ) 100 50
5
44 m/s2
1
0.5
0.1
0.01
Frequency : 10~2000 Hz Acceleration : 100 m/s2 maximum Vibration direction : see diagram Detection level : chatter of 100 µs minimum
UE
Automotive electronic standard
Range where chattering occurs N.O. contact coil not energized on Z-direction Z
10
10
50
100
500
1000
2000
D
FTR-P1 Y
Frequency (Hz)
X
(20
12
7. SHOCK RESISTANCE CHARACTERISTICS
Shock level
(m/s2) 1,000
)
Shock application time : 11 ms, half-sine wave Test material : coil, energized and de-energized Shock direction: see diagram Detection level : chatter of 100 µs minimum
800 600 400
Y2
200 0
X1
X2
Y1
Y2
Z1
Shock direction
Z2
Z2
: N.C. contact (coil de-energized) : N.C. contact (coil energized)
Y1
FTR-P1
X1
Z1 X2
5
FTR-P1 SERIES (QUIET TYPE) ■ REFERENCE DATA Distribution of operate and release voltage
Distribution (%)
Distribution (%)
40
DI 20
0
60 40 20
SC
■ DIMENSIONS ● Dimensions
P1CP012W F&T
60 40 20
0
0 10 20 30 40 50 60 70 80 Nominal voltage multiplying factor (%)
FTR-P1 n = 100
80
Distribution (%)
80
60
100
FTR-P1 n = 100 Operate Release
Operate Release
FTR-P1 n = 100
Distribution of contact resistance
Distribution of operate and release time
100
80
0
1
ON
2
3 4 5 Time (ms)
6
7
0
8
0
10 20 30 40 50 60 70 80 Contact resistance (mΩ)
TIN
9616
21.8+0.2
16.9+0.6
UE
3.5
16.3+0.2
D
(2.3)
● Mounting hole layout (BOTTOM VIEW)
(2.45)
12.0
(20
12
● Schematic (BOTTOM VIEW)
)
N.C.
12.0
4
5 1
5-¿ 1.2 12.2 Tolerance –0.1
3
COM
2
N.O. 2.1 Unit : mm
6
FTR-P1 SERIES (QUIET TYPE)
Fujitsu Components International Headquarter Offices
DI
SC
Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email:
[email protected] Web: www.fcl.fujitsu.com
Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email:
[email protected] Web: www.fceu.fujitsu.com
North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email:
[email protected] Web: www.fcai.fujitsu.com
Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email:
[email protected] www.fcal.fujitsu.com
© 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 09/2001
ON
TIN
UE
D
(20
12
)
7