TECHNICAL DATA Assembly Instructions POWER STATION for ELECTRIC VEHICLES Wallbox PC310 and PC320
The product of:
TECHNICAL DATA and ASSEMBLY INSTRUCTIONS POWER STATION for ELECTRIC VEHICLES Wallbox PC310 und PC320
CONTENT: 1
Configurations ................................................................................................................................................ 3 1.1 Model: PC310/320 (Basic configuration) ........................................................................................... 3 1.2 Further Configuration PC310/320 ...................................................................................................... 3 2 Ambient conditions and technical data ........................................................................................................... 4 3 Regulations ..................................................................................................................................................... 4 3.1 General .............................................................................................................................................. 4 3.2 Safety ................................................................................................................................................ 4 3.3 EMC ................................................................................................................................................... 4 3.4 Function ............................................................................................................................................. 4 4 Typical Application .......................................................................................................................................... 5 5 Dimenstions and Installation instruction.......................................................................................................... 5 5.1 COMMISSIONING AND OPERATING INSTRUCTIONS .................................................................. 5 5.2 GSM COMMUNICATION .................................................................................................................. 5 5.3 Dimensions PC 310 ........................................................................................................................... 6 5.4 DIMENSIONS PC 320 ....................................................................................................................... 7 6 COMMISSIONING AND OPERATION ........................................................................................................... 8 6.1 TROUBLESHOOTING ....................................................................................................................... 8 7 ETS WEB - Internet portal und operation center for ....................................................................................... 9 e-mobility provider and EV-DRIVERS www.enio.at.................................................................................................. 9 8 Kontakt ........................................................................................................................................................... 9 9 Our references .............................................................................................................................................. 10
2/10
TECHNICAL DATA and ASSEMBLY INSTRUCTIONS POWER STATION for ELECTRIC VEHICLES Wallbox PC310 und PC320
1 CONFIGURATIONS 1.1
MODEL: PC310/320 (BASIC CONFIGURATION)
Charging Equipment (EVSE) for electric vehicles (EV) for installation in the garage, a carport or other protected areas • • • • • • • • • • • • • • 1.2
Ready for installation for existing house installations up to 16A, (the power feed line protection) IEC 62196-2, type 1 (1 phase) or type 2 (1phasig/3phasig) charging coupler (up to 16A). Module inside for controlling of mode 3 charging procedure of EVSE acc. to IEC 61851-1 2nd Ed. Communication with EV during charging process by PWM (EVSE_EV) and AM (EV_EVSE) via CP-line Monitoring of PE-connection to EV Indication of max. charging current to EV acc. to coding of plug via CS-line (only type 2 EVSE-socket) Switching of EV-supply, fan and shutter (only type 2 EVSE-socket) by relays Indication of charging status by two digital transistor-stages prepared for direct connection of LED Enable of charging by two digital inputs, one used as general enable, 2nd used as feedback for shutter RS485-I/F for communication and setup to parameter Digital inputs, outputs and I/F referred to PE Mains either 230V or 115V by setup of mains-input SRCD-Protection for additional Schuko-Inlet Communication with PC 400/Pole for installation in garages FURTHER CONFIGURATION PC310/320
• • • •
PC 321 - basic configuration with intelligent charging control (ETS-Core), LAN-communication and smart grid function for disposable consumer (heating pump, water heater, etc.) PC 322 - basic configuration with RFID for customer authorization (13.56 MHz) PC 323 - basic configuration with RFID and GSM modem for locations without Internet access PC 350 - charging system for concentrated charging places in parking garages including load management, info- touchscreen and authorization via RFID or/and Cheap Card. ETS-CORE of PC321 enables: Micro-smart-grid within a home / office building Automated control of manageable devices Optimum utilization of PV electricity and use of second-life batteries Control of the charging process via web or smartphone (ETSweb) Automatic load control and energy management, adjustable by power suppliers and customers
3/10
TECHNICAL DATA and ASSEMBLY INSTRUCTIONS POWER STATION for ELECTRIC VEHICLES Wallbox PC310 und PC320
2 AMBIENT CONDITIONS AND TECHNICAL DATA Rated supply voltage Rated input current Rated load relays Rated load digital outputs Digital inputs I/F Amb temperature (storage) Amb temperature (operation) Humidity Class of protection Cat. Overvoltage Degree of protection Terminals
230V 50/60Hz or 115V 50/60Hz 20mA (230V) or 40mA (115V) 277V 50Hz 3A (resistive, 831VA)); 30V= 3A (resistive, 90W) 10mA ≤ 5mA; M refers to PE/FE RS485 (38400Bd, 8 bit data, no parity, 1 stop-bit); M refers to PE/FE -30 ... 85°C -25 ... 50°C 5 ... 95% rel. (no condensation) II II IP54 Screw terminal 2.5mm² to 4 mm²
3 REGULATIONS 3.1
GENERAL
2006/95/EG 2004/108/EG 2002/95/EG 2002/96/EG ElektroG 3.2
SAFETY
EN 60950-1:2006 3.3
Safety of Information Technology Equipment Including Electrical Business Equipment
EMC
EN 61000-6-2 EN 61000-6-3 EN 61000-3-2:2006 EN 61000-3-3:2008 systems 3.4
EC-regulation for low voltage appliances EC-regulation for EMC EC-regulation for reduction of hazardous substances EC-regulation regarding waste electrical and electronic equipment German code for electrical and electronic equipment
Immunity for industrial environments (EMC) Emission standard for residential, commercial and light-industrial environments (EMC) Limits for harmonic current emissions (equipment input current ≤ 16 A per phase Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply
FUNCTION
IEC 61851-1 Ed 2.0
Electric vehicle conductive charging system Part 1: General requirements (69/173/FDIS) IEC 61851-22 Ed 2.0 Electric vehicle conductive charging system Part 22: AC electric vehicle charging station (69/184/CD) IEC 62196-1 Plugs, socket-outlets, vehicle connectors and vehicle inlets Conductive charging of electric vehicles Part 1: General requirements (23H/248/CDV)
4/10
TECHNICAL DATA and ASSEMBLY INSTRUCTIONS POWER STATION for ELECTRIC VEHICLES Wallbox PC310 und PC320
4 TYPICAL APPLICATION Long-time charging of plug-in hybrid and EV, scooters, electric bicycles, etc. as well as overnight charging in private or controlled area e.g. garage, car port or other sheltered areas. The charging station is pre-assembled and ready for installation. The typical electrical and electronic components for charging electric vehicles are included. The usual electrical installation of the garage (16A, 1-phase) can be used as power supply for the box. A counter for the discharged electrical energy is pre-installed in PC300. The data of the counter is stored in the platform ETSweb (This requires an active Internet connection, LAN or GSM/GPRS).
Note: The charging station must be installed by qualified personnel, according to the specific laws of your country. Usually, it is necessary to have an RCD for the circuit in your distribution box. If there is no RCD, it is necessary to have at least a suitable circuit breaker in the distribution box for the supply line.
5 DIMENSTIONS AND INSTALLATION INSTRUCTION The charging station can be mounted with standard mounting hardware and tools. The supply line for the power supply must have at least a conductor cross-section of 2.5 mm² (16A). The power supply can be clamped onto 2 the back of the box (up to 4mm ). ATTENTION: N + L must be connected correctly; otherwise the counter will not work properly 5.1
COMMISSIONING AND OPERATING INSTRUCTIONS
After applying the supply voltage, the gas station takes about 1 minute to boot up the program. Standby for charging and all other states are signaled by the green LEDs. 5.2
GSM COMMUNICATION
In the PC 312, 321 a communication unit is installed. This unit will attempt to connect to the central office after switching on GSM/GPRS. This connection may take a few minutes the basic function of charging is not affected by this.
5/10
TECHNICAL DATA and ASSEMBLY INSTRUCTIONS POWER STATION for ELECTRIC VEHICLES Wallbox PC310 und PC320
5.3
DIMENSIONS PC 310
6/10
TECHNICAL DATA and ASSEMBLY INSTRUCTIONS POWER STATION for ELECTRIC VEHICLES Wallbox PC310 und PC320
5.4
DIMENSIONS PC 320
7/10
TECHNICAL DATA and ASSEMBLY INSTRUCTIONS POWER STATION for ELECTRIC VEHICLES Wallbox PC310 und PC320
6 COMMISSIONING AND OPERATION Step 1 Check correct installation; turn on the parent RCBO switch (N + L must be connected correctly; otherwise the counter will not work properly) Step 2 Turn on the RCBO switch on the charging station* Green LED lights up after 1 minute The charging station is ready to use Step 3 Connect the vehicle, Red LED lights up - green LED goes off - vehicle is charging Step 4 Register at www.enio.at and get a full overview of your charges and vehicles 6.1
TROUBLESHOOTING
With the PC 300 you have purchased a product that was built with state of the art technology and is safe to operate. The software of the charging station can be kept up to date with remote maintenance by the operator of the charging station. The following guide can help you fix the most common problems that may occur. Error
Green LED doesn’t lit
Red LED doesn’t lit Green LED doesn’t lit
Possible cause
Solution
No power
Check parent RCBO switch
RCBO in the charging station is switched off
Turn on the RCBO switch in the charging station
Vehicle is not connected
Make sure the vehicle is connected correctly to the charging station
Software error
Turn RCBO off and on again in the charging station. Wait 1 minute until the green LED lights up. Re-connect vehicle.
Vehicle error
Check charging function of the vehicle with the vehicle charging cable
No GPRS reception
Check GPRS reception at installation. A1 should be available. If there is no GPRS coverage available, a connection through LAN RJ45 is possible.
SIM card expired (0 credit balance, prepaid SIM empty), contract cancelled.
Check with A1 (Telekom) operators on the validity of the SIM card.
LEDs functioning correctly, but charging doesn’t start
Charging station doesn’t send data to the server. Charges are not evident.
8/10
TECHNICAL DATA and ASSEMBLY INSTRUCTIONS POWER STATION for ELECTRIC VEHICLES Wallbox PC310 und PC320
7 ETS WEB - INTERNET PORTAL UND OPERATION CENTER FOR E-MOBILITY PROVIDER AND EV-DRIVERS WWW.ENIO.AT ETSweb is the internet platform PDTS developed for the intelligent electric vehicle (EV) charging stations of the company´s ETS 2010 system. The platform serves EV owners as well as station operators and their partners by providing surveillance monitoring and maintenance tools. The platform is suitable for both single charging stations (e.g. in private households) and large scale charging networks.
BENEFITS FOR STATION OPERATORS: Technical and operational management of charging stations Management of tariffs, pricing, customers, customer cards and contracts Comprehensive reporting of charges including data export Individual access levels for employees and service partners Remote maintenance of charging stations
BENEFITS FOR EV-DRIVERS:
Finding charging stations – filtering by location, availability, opening hours, connector types, operators and more
Active charging – monitoring remaining charge time
Charge overview – when, where and how much?
Reporting - by vehicle, identity or payment method
Contracts with operators – to have best rates and conditions
status
and
More Information at www.enio.at
8 KONTAKT Ecotech e.U Ameisgasse 65, A – 1140 Vienna Tel: +43-650-440-6211, Fax: +43-720 345 310, mail:
[email protected] ; web: www.ecotech-eu.com
9/10
TECHNICAL DATA and ASSEMBLY INSTRUCTIONS POWER STATION for ELECTRIC VEHICLES Wallbox PC310 und PC320
9 OUR REFERENCES
PC 312 (Verbund, Am Hof, Vienna)
PC 310 Project VIBRATE (EON, WienEnergie, EVN, Verbund)
PC 322 Garage Lugner City, Vienna 10/10
