30924E01

SPARE PART LIST DIVATOR

© 2011 Interspiro AB, Sweden.This publication contains or refers to proprietary information which is protected by copyright. All rights are reserved. Interspiro®, DIVATOR Lite® and Spiromatic® are registered trademarks belonging to Interspiro. This publication may not be copied, photocopied, reproduced, translated, or converted to any electronic or machinereadable form in whole or in part without prior written approval from Interspiro.

Read before use 1.

Only holders of a valid INTERSPIRO Service Certificate may carry out service and repairs on INTERSPIRO breathing equipment. Unauthorized service may result in malfunction and users relying thereon could sustain severe respiratory injury or death.

2. When using the spare part list always refer to the equipment's SERVICE MANUAL in regard to procedure and handling of the spare parts assembly and function. 3. Changes to this document – necessitated by typographical errors, inaccuracies of current information or improvements and changes of equipment – may be done at any time and without prior notice. 4.

The NOTES column is used for short descriptions of the spare part, for example dimensions or number of included sub components. For example "10 x 336 100 437" indicates that this is a multi-pack that consists of 10 pieces of the single component 336 100 437.

5. The service kits contain replacement items used for preventive maintenance. 6. Always refer to www.interspiro.com for product or document updates and for service bulletins.

Contents service kits....................................................................................................... 7 service kits (cont.) .......................................................................................... 8 Face Mask Grey NATURAL RUBBER.................................................................... 9 Face Mask Black NATURAL RUBBER................................................................ 10 Face Mask Black Silicone............................................................................. 11 Face Mask Yellow Silicone........................................................................... 12 DIVATOR HATCH.................................................................................................. 13 Breathing Valve without Safety Pressure, Black................................... 14 Breathing Valve without Safety Pressure, Black (cont.)........................... 15 Breathing Valve with Safety Pressure, Black.......................................... 16 Breathing Valve with Safety Pressure, Black (cont.).............................. 17 Breathing Valve "OCTOPUS" Without Safety Pressure, BLACK................ 18 Breathing Valve "OCTOPUS" Without Safety Pressure, BLACK (cont.)..... 19 Breathing Valve Without Safety Pressure, Grey..................................... 20 Breathing Valve Without Safety Pressure, Grey (cont.)............................. 21 Breathing Valve with Safety Pressure, Grey........................................... 22 Breathing Valve with Safety Pressure, Grey (cont.)................................ 23 MKII Regulator with warning...................................................................... 24 MKII Regulator with warning (cont.)........................................................... 25 MKII WARNING DEVICE...................................................................................... 26 MKII regulator................................................................................................ 27 MKII Regulator without warning................................................................ 28 MKIII Regulator.............................................................................................. 29 MKiiI Hoses...................................................................................................... 30 Pressure Gauge ASSemblY............................................................................ 31

MKIII Regulator UNIT...................................................................................... 32 MKIII Plug-in pressure Regulator.............................................................. 33 DIVATOR BCW - Wing type buoyancy compensator.................................... 34 BCW - accessories......................................................................................... 35 BCW - exhaust valve assembly .................................................................... 36 Harness - single & cylinder pack............................................................... 37 Harness PRO.................................................................................................... 38 Cylinder Steel - Single 316.......................................................................... 39 Cylinder Steel - Pack 324............................................................................. 40 Cylinder Steel - Pack 326............................................................................. 41 Cylinder Composite - Pack 323.4................................................................. 42 Cylinder Composite - Pack 326.7................................................................. 43 two TYPES of cylinder VALVE........................................................................ 44 cylinder valve................................................................................................ 45 cylinder valve & easy-fill valve ............................................................... 46 cylinder Pack Weights................................................................................. 47 Weight system................................................................................................ 48 DP1 Surface panel......................................................................................... 49 DP1 valve block.............................................................................................. 50 DP1 Whistle insert........................................................................................ 51 DP1 Shuttle insert......................................................................................... 52 DP1 Hose & Relieving loop........................................................................... 53 DP1 Connection manifold............................................................................. 54 DP1 Venting insert......................................................................................... 55 DP1 Regulator, P+......................................................................................... 56 DP1 Accessories............................................................................................. 57 DP1 t-piece...................................................................................................... 58 TOOLS................................................................................................................ 59

service kits All service kits and service parts listed below shall be replaced during service.

EVERY YEAR FULL FACE MASK 460 190 404 97 220-01

Service kit for 1 Full face mask Service kit for 1 DIVATOR Hatch

See page 9 - 12 See page 13

BREATHING VALVE 336 190 226

O-ring, 10 pack for 10 Breathing valves

See page 14, 16, 20 & 22

Service kit MKII - Annual service

See page 27

Service kit MKIII - Annual service

See page 33

DP1 - SURFACE PANEL 460 190 701 Service kit for 1 DIVATOR DP1

See page 49

DIVATOR BCW 460 200 525 336 190 272 346 190 053

Service kit for 1 BCW Inflator O-ring, 10 pack for cylinder connection Protective band, 10 pack

See page 36 See page 35 See page 35

Service kit for 1 Breathing valve, NP Service kit for 1 Breathing valve, SP Service kit for 1 Octopus Breathing valve Service kit for 1 Octopus Breathing valve without lever

See page 15, 19 & 21 See page 17 & 23 See page 19 See page 19

REGULATOR - MKII 460 200 507 REGULATOR - MKIII 460 190 717

EVERY 6 YEARS BREATHING VALVE 460 190 902 460 190 904 460 200 510 460 200 512

WARNING DEVICE - MKII 460 190 908 Service kit for 1 Warning device

See page 26

REGULATOR - MKII 460 190 906 460 190 910 460 190 756 460 190 912

Service kit for 1 DIVATOR Swivel Service kit for 1 Regulator 1-port swivel Service kit for 1 MKII 4-port swivel Service kit for 1 Extra air manifold, E-10

See page 25 & 28 See page 27 See page 27 See page 28 (not sold on the US market)

REGULATOR - MKIII 460 200 518 460 190 912

Service kit for MKIII Regulator unit Service kit for 1 Extra air manifold, E-10

See page 33 See page 28 (not sold on the US market)



service kits (cont.) CYLINDER VALVE TYPE I 460 190 390 Service kit for 1 cylinder valve

See page 45

CYLINDER VALVE TYPE II 460 190 686 Service kit for 1 cylinder valve

See page 46

EASY-FILL VALVE 460 190 732

Service kit for 1 Easy-Fill valve

See page 46

DP1 SURFACE PANEL 460 190 702

Service kit for 1 compl. DP1 surface panel See page 49

DP1 REGULATOR P+ 460 190 703

Service kit for 1 Regulator P+

See page 56

Special Kits DIVATOR Mask & Breathing valve 460 200 503 Service Part Kit, for component level maintenance



Incl. selected rubber parts (listed in document 30508).

Face Mask Grey NATURAL RUBBER

13

16

(see page 13)

20

1 2

14 3

15

7

17

12

19 21 6

5 18 4

9

9

8

8 11 10

# Spare part

Order #

• DIVATOR mask, grey NR 1 Inner mask assy. grey NR Incl. single items of #2 & 3

Notes

# Spare part

Order #

336 190 852

15 Spacer

336 190 554 10 x 336 100 890

460 190 543

16 Visor MKII

336 190 850

17 Head harness, grey NR

460 190 375

2 Valve seat assy. grey 460 190 550 2 x 331 100 791 2 x 336 900 021

18 Pressure equalizer 336 190 373 Incl. two items of #5 & one item of 19a & 21 19a Pressure equalizing pad 19b Pressure equalizing pad

3 Non-return valve disc

336 190 264 10 x 331 100 791

4 Screw

336 190 246 10 x 941 136 224

5 Screw

336 190 489 10 x 941 136 226

6 Retaining plate

460 190 398

7 Mask body assy. grey NR

460 190 545 Incl. #12

8 Circlip

336 190 255 10 x 944 607 106

9 Screw

460 190 300 10 x 336 100 029

10 Cover assembly, grey 336 190 017 Incl. single item of #7 & two items of #8-9 11 O-ring

336 190 222 5 x 944 610 221

12 Buckle assy.

460 190 541 5 x 336 900 017

13 Visor frame kit MKII, grey Incl. two items of #14 & 15

460 190 548

14 Screw

336 190 409 10 x 336 900 138

88 542-51 460 190 513

Notes

With four slots. (Not shown)

For OTS mic.

20 Visor with DIVATOR Hatch

96 962-01

21 Holder

460 190 510 for # 19

# SERVICE KIT order #

Service kit for 1 DIVATOR face mask - 1 single item of each of #11 - 2 single items of each of #3



460 190 404

Face Mask Black NATURAL RUBBER

13

16

(see page 13)

20

1 2

14 3

15

7

17

12

19 21 6

5 18 4

9

9

8

8 11 10

# Spare part

Order #

• DIVATOR mask, black NR

97 771-01

Notes

# Spare part

Order #

Notes

15 Spacer

336 190 554 10 x 336 100 890

1 Inner mask assy. black silicone 460 190 542 Incl. single items of #2 & 3

16 Visor MKII

336 190 850

17 Head harness, black NR

460 190 457

2 Valve seat assy. black 460 190 549 2 x 331 100 791 2 x 336 101 136

18 Pressure equalizer 336 190 373 Incl. two items of #5 & one item of 19a & 21

3 Non-return valve disc

19a Pressure equalizing pad 19b Pressure equalizing pad

336 190 264 10 x 331 100 791

4 Screw

336 190 246 10 x 941 136 224

5 Screw

336 190 489 10 x 941 136 226

6 Retaining plate

460 190 398

7 Mask body assy. black NR

97 820-51

8 Circlip

336 190 255 10 x 944 607 106

9 Screw

460 190 300 10 x 336 100 029

Incl. #12

10 Cover assembly, black 460 190 555 Incl. single item of #7 & two items of #8-9 11 O-ring

336 190 222 5 x 944 610 221

12 Buckle assy.

460 190 541 5 x 336 900 017

13 Visor frame kit MKII, black Incl. two items of #14 & 15

460 190 547

14 Screw

336 190 409 10 x 336 900 138

88 542-51 460 190 513

With four slots. (Not shown)

For OTS mic.

20 Visor with DIVATOR Hatch

96 962-01

21 Holder

460 190 510 for # 19

# SERVICE KIT order #

Service kit for 1 DIVATOR face mask 460 190 404 - 1 single item of each of #11 - 2 single items of each of #3

10

Face Mask Black Silicone

13

16

(see page 13)

20

1 2

14 3

15

7

17

12

19 21 6

5 18 4

9

9

8

8 11 10

# Spare part

Order #

Notes

# spare part order # notes

• DIVATOR mask, black silicone 336 101 161

15 Spacer

336 190 554 10 x 336 100 890

1 Inner mask assy. black silicone 460 190 542 Incl. two single item of #2 & 3

16 Visor MKII

336 190 850

17 Head harness, black NR

460 190 457

2 Valve seat assy. black 460 190 549 2 x 331 100 791 2 x 336 101 136

18 Pressure equalizer 336 190 373 Incl. two items of #5 & one item of 19a & 21

3 Non-return valve disc

336 190 264 10 x 331 100 791

4 Screw

336 190 246 10 x 941 136 224

19a Pressure equalizing pad 19b Pressure equalizing pad

5 Screw

336 190 489 10 x 941 136 226

6 Retaining plate

460 190 398

7 Mask body assy. black silicone 460 190 544 Incl. #12 8 Circlip

336 190 255 10 x 944 607 106

9 Screw

460 190 300 10 x 336 100 029

10 Cover assembly, black 460 190 555 Incl. single item of #7 & two items of #8-9 11 O-ring

336 190 222 5 x 944 610 221

12 Buckle assy.

460 190 541 5 x 336 900 017

13 Visor frame kit MKII, black Incl. two items of #14 & 15

460 190 547

14 Screw

336 190 409 10 x 336 900 138

88 542-51 460 190 513

With four slots. (Not shown)

For OTS mic.

20 Visor with DIVATOR Hatch

96 962-01

21 Holder

460 190 510 for # 19

# SERVICE KIT order #

Service kit for 1 DIVATOR face mask - 1 single item of each of #11 - 2 single items of each of #3

11

4 60 190 404

Face Mask Yellow Silicone

13

16

(see page 13)

20

1 2

14 3

15

7

17

12

19 21 6

5 18 4

9

9

8

8 11 10

# spare part order # notes

# spare part order # notes

• DIVATOR mask, yellow silicone 336 190 901

15 Spacer

336 190 554 10 x 336 100 890

1 Inner mask assy. yellow silicone 336 190 909 Incl. single items of #2 & 3

16 Visor MKII

336 190 850

2 Valve seat assy. grey 460 190 550 2 x 331 100 791 2 x 336 900 021

17 Head harness, grey NR

460 190 375

18 Pressure equalizer

336 190 373

88 542-51 460 190 513

Incl. two items of #5 & one item of 19a & 21

3 Non-return valve disc

336 190 264 10 x 331 100 791

4 Screw

336 190 246 10 x 941 136 224

19a Pressure equalizing pad 19b Pressure equalizing pad

5 Screw

336 190 489 10 x 941 136 226

For OTS mic.

6 Retaining plate

460 190 398

20 Visor with DIVATOR Hatch

96 962-01

21 Holder

460 190 510 for # 19

7 Mask body assy. yellow silicone 336 190 908 Incl. #12

8 Circlip

336 190 255 10 x 944 607 106

9 Screw

460 190 300 10 x 336 100 029

10 Cover assembly, grey 336 190 017 Incl. single item of #7 & two items of #8-9 11 O-ring

336 190 222 5 x 944 610 221

12 Buckle assy.

460 190 541 5 x 336 900 017

13 Visor frame kit MKII, grey Incl. two items of #14 & 15

460 190 548

14 Screw

336 190 409 10 x 336 900 138

With four slots. (Not shown)

# SERVICE KIT order #

ervice kit for 1 DIVATOR face mask S - 1 single item of each of #11 - 2 single items of each of #3

12

460 190 404

DIVATOR HATCH 6

5 Old version

1 13 8

2

12 11 3

10

4 9

New version

7

# spare part order # notes

• DIVATOR Hatch assy.

-

Sold as Visor with DIVATOR Hatch 96 962-01

6 Valve disc

97 203-51

Single pack of item #6

# Service Kit order # notes

Service kit Hatch, 1 pack 97 220-01

Incl. single item of # 7, 9, 11, 12 and two items of #10. Item # 6 not included.

Stem & Screw Kit

Repair kit incl. single of item #3 & 5

30 903-51

13

Breathing Valve without Safety Pressure, Black

2

11

9

1 (s ee p age 15)

19

10

17

3

12

16

18

13

7

4

5 6

8 # spare part order # notes

# spare part order # notes

• Breathing valve (w/o SP)

336 101 150 for face mask

11 Nut, black

460 190 516 5 x 336 101 140

• Breathing valve (w/o SP)

97 199-01

1 Exhalation unit, w/o SP

336 101 155

12 Balancing diaphragm 13 Valve cone assy.

460 190 409 5 x 331 100 641 336 190 064

2 Valve housing, black w/o SP Incl. single items of #9 - 11 & 19

336 101 156

14 -

with mouth piece

15 -

3 Counter pressure assy. w/o SP 460 190 588

16 Valve insert sub assy. w/o SP 97 083-51 Incl. single items of #3, 12 & 13

4 Connection nipple

96 341-52

17 Mouth piece

460 190 505

5 O-ring

336 190 227 10 x 331 900 064

18 Mouth piece assy.

336 190 353 Incl. #17

6 O-ring, green

99 486-51

19 Sealing plug

460 190 511 5 x 336 100 509

7 Retaining ring

346 190 198 10 x 336 100 777

8 Valve insert assy. w/o SP Incl. single items of #3-7, 12 & 13

460 190 558

Incl. single items of #5 & 6

10 x 99 486-01

9 Non-return valve assy.

460 190 559

10 O-ring

336 190 226 10 x 336 900 008

Only used with face mask

14

Breathing Valve without Safety Pressure, Black (cont.) 16 39 36

37

38

41

40

42

43

12

13

44

34

21

22

23

24

25

26 27

28 29 33

# spare part order # notes

31 32

20

35

1

30



# spare part order # notes

20 Locking ring, black

460 190 515 5 x 336 101 139

38 Sealing sleeve

346 190 246 5 x 336 100 019

21 Shield ring

346 190 197 5 x 336 800 184

39 Centre spindle

460 190 406

40 Adjusting nut

346 190 247 5 x 331 102 020

Incl. single of #40

22 Cover with purge button, black 460 190 518 Incl single item of #21 & 34

41 Sealing spring w/o SP

460 190 501 5 x 336 100 438

23 Guide disc

460 190 721

42 Pin

336 190 258 10 x 336 100 046

24 Sealing spring

460 190 500 5 x 333 100 056

43 Lifting spindle

460 190 408

25 Sealing disc

460 190 393 5 x 336 100 005

336 190 284

26 Exhalation diaphragm

30 005-51

44 Sealing piston Incl. single item of #12, 13 & 43

27 Securing ring

460 190 413 10 x 336 100 008

28 Diaphragm ring

460 190 394

# SERVICE KIT

Service kit for 1 Breathing valve, w/o SP 460 190 902 - 1 single item of each of #5, 6, 7, 9, 10, 16 & 35

5 x 30 005-01

29 Guide pin

346 190 194 10 x 336 100 011

30 Diaphragm

460 190 140

31 Diaphragm holder

460 190 395

32 O-ring

336 190 224 5 x 336 900 009

33 Washer

336 190 638 10 x 336 100 437

34 Purge button

336 190 487 5 x 336 100 432

35 Diaphragm assembly Incl. single items of #25-33

336 190 360

36 Lever assy.

460 190 522

37 Lever support

460 190 504 5 x 336 100 397

15

Order #

Breathing Valve with Safety Pressure, Black 2

11 1 (s ee p age 17)

14a

9 10 14b 14c

15

14d

14

16

12

3

13

4

5 6

7 8

# spare part order # notes



336 101 149

11 Nut, black

460 190 516 5 x 336 101 140

1 Exhalation unit, w SP

460 190 552

12 Balancing diaphragm

460 190 409 5 x 331 100 641

2 Valve housing, black w. SP Incl. single items of #9-11, 14 & 15

336 101 158

13 Valve cone assy.

336 190 064

14 Lever assy.

336 190 142 Incl. #15

3 Counter pressure assy. w SP 460 190 589

15 O-ring

336 190 225 10 x 336 900 001

4 Connection nipple

16 Valve insert sub assy. w SP

97 028-51

•

Breathing valve (w. SP)

# spare part order # notes

Incl. single items of #5 & 6

96 341-51

5 O-ring

336 190 227 10 x 331 900 064

6 O-ring

336 190 228 10 x 336 900 007

7 Retaining ring

346 190 198 10 x 336 100 777

8 Valve insert assy. w SP

336 190 357

9 Non-return valve assy.

460 190 559

10 O-ring

336 190 226 10 x 336 900 008

Incl. single items of #3-7, 12 & 13

17 – 19

Only used with face mask

16

-

Incl. #3, 12 & 13

Breathing Valve with Safety Pressure, Black (cont.) 16 39 36

37

38

41

40

42

43

12

13

44

34

21

22

23

24

25

26 27

28 29 33

31 32

20

35

1 # spare part order # notes

30

# spare part order # notes

20 Locking ring, black

460 190 515 5 x 336 101 139

38 Sealing sleeve

346 190 246 5 x 336 100 019

21 Shield ring

346 190 197 5 x 336 800 184

39 Centre spindle

460 190 406 Incl. #40

40 Adjusting nut

346 190 247 5 x 331 102 020

22 Cover with purge button, black 460 190 518 incl single item of #21 & 34

41 Sealing spring w. SP

460 190 509 5 x 336 100 438

23 Guide disc

460 190 412

42 Pin

336 190 258 10 x 336 100 046

24 Sealing spring

460 190 508 5 x 336 100 436

43 Lifting spindle

460 190 408

25 Sealing disc

460 190 393 5 x 336 100 005

44 Sealing piston

336 190 284

26 Exhalation diaphragm

30 005-51

5 x 30 005-01

27 Securing ring

460 190 413 10 x 336 100 008

28 Diaphragm ring

460 190 394

29 Guide pin

346 190 194 10 x 336 100 011

30 Diaphragm

460 190 140

31 Diaphragm holder

460 190 395

32 O-ring

336 190 224 5 x 336 900 009

33 Washer

336 190 638 10 x 336 100 437

34 Purge button

336 190 487 5 x 336 100 432

35 Diaphragm assembly

336 190 360

36 Lever assy.

460 190 522

37 Lever support

460 190 504 5 x 336 100 397

Incl. single items of #25-33

Incl. single item of #12, 13 & 43

# SERVICE KIT

order #

Service kit for 1 Breathing valve, SP 460 190 904 - 1 single item of each of #5, 6, 7, 9, 10, 14, 16 & 35

17

Breathing Valve "OCTOPUS" Without Safety Pressure, BLACK

2

1 (s ee p age 19)

14a

11

9

14b 14c 15 14d 17 14

18

12

3

13

4 7

16

5

6

8 # spare part order # notes

# spare part order # notes

• Breathing valve (w/o SP)

97 199-02

Octopus, w lever

11 Nut, black

460 190 516 5 x 336 101 140

• Breathing valve (w/o SP)

97 199-03

Octopus, w/o lever

12 Balancing diaphragm

460 190 409 5 x 331 100 641

1 Exhalation unit, w/o SP

99 484-51

13 Valve cone assy.

336 190 064

2 Valve housing, black w. SP

336 101 158

14 Lever assy.

336 190 142

15 O-ring

336 190 225 10 x 336 900 001

For US market only

Incl. #9, 11, 14 & 15

Incl. single item of #15

3 Counter pressure assy. w/o SP 460 190 588 4 Connection nipple

Incl. single items of #5 & 6

16 Valve insert sub assy. w/o SP 97 083-51

96 341-52

Incl. single item of #3, 12 & 13

5 O-ring

336 190 227 10 x 331 900 064

6 O-ring, green

99 486-51

10 x 99 486-01

7 Retaining ring

346 190 198 10 x 336 100 777

8 Valve insert assy. w/o SP

460 190 558

9 Non-return valve assy.

460 190 559

Incl. single items of #3-7, 12 & 13

17 Mouth piece

460 190 505

18 Mouth piece assy.

336 190 353

Incl. single item of #17

10 -

18

Breathing Valve "OCTOPUS" Without Safety Pressure, BLACK 16 36

37

39 38

41

40

42

43

12

13

44

34

21

22

23

24

25

26 27

28 29 33

30

31 32

20

35 1 # spare part order # notes

# spare part order # notes

20 Locking ring, black

460 190 515 5 x 336 101 139

39 Centre spindle

460 190 406 Incl. #40

21 Shield ring, yellow

99 485-51

40 Adjusting nut

346 190 247 5 x 331 102 020

5 x 99 485-01

22 Cover with purge button, black 460 200 504 with yellow shield ring, incl single item of #21 & 34

23 Guide disc

460 190 721

24 Sealing spring

460 190 500 5 x 333 100 056

25 Sealing disc

460 190 393 5 x 336 100 005

26 Exhalation diaphragm

30 005-51

460 190 501 5 x 336 100 438 336 190 258 10 x 336 100 046

43 Lifting spindle

460 190 408

44 Sealing piston

336 190 284

Incl. single item of #12, 13 & 43

5 x 30 005-01

27 Securing ring

460 190 413 10 x 336 100 008

28 Diaphragm ring

460 190 394

29 Guide pin

346 190 194 10 x 336 100 011

30 Diaphragm

460 190 140

31 Diaphragm holder

460 190 395

32 O-ring

336 190 224 5 x 336 900 009

33 Washer

336 190 638 10 x 336 100 437

34 Purge button

336 190 487 5 x 336 100 432

35 Diaphragm assembly

336 190 360

36 Lever assy.

460 190 522

Incl. single items of #25-33

41 Sealing spring w/o SP 42 Pin

37 Lever support

460 190 504 5 x 336 100 397

38 Sealing sleeve

346 190 246 5 x 336 100 019

# SERVICE KIT

order #

Service kit for 1 Octopus Breathing valve, 460 200 510 with lever - 1 single item of each of #5, 6, 7, 9, 14, 16 & 35 Service kit for 1 Octopus Breathing valve, 460 200 512 without lever - 1 single item of each of #5, 6, 7, 9, 16 & 35

19

Breathing Valve Without Safety Pressure, Grey 2

11

9

1 (s ee p age 21)

19

10

18

17

3

12

16

13

7

4

5 6

8 # spare part order # notes

# spare part order # notes

• Breathing valve (w/o SP)

336 190 345 for face mask

11 Nut, grey

• Breathing valve (w/o SP)

336 190 347 with mouthpiece

12 Balancing diaphragm

460 190 409 5 x 331 100 641

1 Exhalation unit, w/o SP

336 190 406

13 Valve cone assy.

336 190 064

2 Valve housing, grey w/o SP

336 190 408 Incl. #9 - 11

14 -

346 190 201 5 x 331 100 652

3 Counter pressure assy. w/o SP 460 190 588

15 -

4 Connection nipple

16 Valve insert sub assy. w/o SP 97 083-51

Incl. single items of #5 & 6

96 341-52

Incl. single items of #3, 12 & 13

5 O-ring

336 190 227 10 x 331 900 064

17 Mouth piece

460 190 505

6 O-ring, green

99 486-51

18 Mouth piece assy.

336 190 353 Incl. #17

19 Sealing plug

460 190 511 5 x 460 190 515

10 x 99 486-01

7 Retaining ring

346 190 198 10 x 336 100 777

8 Valve insert assy. w/o SP Incl. single items of #3-7, 13 . & 13

460 190 558

9 Non-return valve assy.

460 190 559

10 O-ring

336 190 226 10 x 336 900 008

Only used with face mask

20

Breathing Valve Without Safety Pressure, Grey (cont.) 16 36

39

37

38

41

40

42

43

12

13

44

34

21

22

23

25

24

26 27

28 29 33

20 Locking ring, grey

31 32

20

35

1 # spare part order # notes

30

# spare part order # notes

346 190 193 5 x 331 100 664

38 Sealing sleeve

346 190 246 5 x 336 100 019

21 Shield ring 346 190 197 5 x 336 800 184

39 Centre spindle

460 190 406 Incl. #40

40 Adjusting nut

346 190 247 5 x 331 102 020

41 Sealing spring w/o SP

460 190 501 5 x 336 100 438

22 Cover with purge button, grey 96 343-51 Incl single item of #21 & 34

23 Guide disc

460 190 721

24 Sealing spring

460 190 500 5 x 333 100 056

25 Sealing disc

460 190 393 5 x 336 100 005

26 Exhalation diaphragm

30 005-51

5 x 30 005-01

27 Securing ring

460 190 413 10 x 336 100 008

28 Diaphragm ring

460 190 394

29 Guide pin

346 190 194 10 x 336 100 011

30 Diaphragm

460 190 140

31 Diaphragm holder

460 190 395

32 O-ring

336 190 224 5 x 336 900 009

33 Washer

336 190 638 10 x 336 100 437

34 Purge button

336 190 487 5 x 336 100 432

35 Diaphragm assembly Incl. single items of #25-33

336 190 360

36 Lever assy.

460 190 522

37 Lever support

460 190 504 5 x 336 100 397

42 Pin

336 190 258 10 x 336 100 046

43 Lifting spindle

460 190 408

44 Sealing piston

336 190 284

Incl. single item of #12, 13 & 43

# SERVICE KIT order #.

ervice kit for 1 Breathing valve, w/o SP 460 190 902 S - 1 single item of each of #5, 6, 7, 9, 10, 16 & 35

21

Breathing Valve with Safety Pressure, Grey

2

11

14a

1 (s ee p age 23)

9 10 14b 14c

15

14d

14

16

12

3

13

4

5

6

7 8

# spare part order # notes

# spare part order # notes

• Breathing valve (w. SP)

336 190 354

11 Nut

346 190 201 5 x 331 100 652

1 Exhalation unit w. SP

336 190 356

12 Balancing diaphragm

460 190 409 5 x 331 100 641

2 Valve housing, grey w. SP

336 190 379

13 Valve cone assy.

336 190 064

14 Lever assy. Incl. single item of #15

336 190 142

15 O-ring

336 190 225 10 x 336 900 001

16 Valve insert sub assy. w SP Incl. single item of #3, 12 & 13

97 028-51

Incl. single items of #9-11, 14 & 15

3 Counter pressure assy. w SP 460 190 589 4 Connection nipple

Incl. single items of #5 & 6

96 341-51



5 O-ring

336 190 227 10 x 331 900 064

6 O-ring

336 190 228 10 x 336 900 007

7 Retaining ring

346 190 198 10 x 336 100 777

8 Valve insert assy. w SP Incl. single items of #3-7, 12 & 13

336 190 357

9 Non-return valve assy.

460 190 559

10 O-ring

336 190 226 10 x 336 900 008

17 - 19

-

# SERVICE KIT

Service part for 10 breathing valves - 10 single items of each of #336 900 008

Only used with face mask

22

Order #

336 190 226

Breathing Valve with Safety Pressure, Grey (cont.) 16 36

39

37

38

41

40

42

43

12

13

44

34

21

22

23

25

24

26 27

28 29 33

20 Locking ring, grey

31 32

20

35

1 # spare part order # notes

30

# spare part order # notes

346 190 193 5 x 331 100 664

38 Sealing sleeve

346 190 246 5 x 336 100 019

21 Shield ring 190 197 5 x 336 800 184

39 Centre spindle

460 190 406 Incl. #40

22 Cover with purge button, grey 96 343-51

40 Adjusting nut

346 190 247 5 x 331 102 020

Incl. single item of #21 & 34

41 Sealing spring w. SP

460 190 509 5 x 336 100 438

23 Guide disc

460 190 412

24 Sealing spring

460 190 508 5 x 336 100 436

25 Sealing disc

460 190 393 5 x 336 100 005

26 Exhalation diaphragm

30 005-51

27 Securing ring

460 190 413 10 x 336 100 008

5 x 30 005-01

28 Diaphragm ring

460 190 394

29 Guide pin

346 190 194 10 x 336 100 011

30 Diaphragm

460 190 140

31 Diaphragm holder

460 190 395

32 O-ring

336 190 224 5 x 336 900 009

33 Washer

336 190 638 10 x 336 100 437

34 Purge button

336 190 487 5 x 336 100 432

35 Diaphragm assembly

336 190 360

42 Pin

336 190 258 10 x 336 100 046

43 Lifting spindle

460 190 408

44 Sealing piston

336 190 284

Incl. single item of #12, 13 & 43

# SERVICE KIT order #

ervice kit for 1 Breathing valve, SP 460 190 904 S - 1 single item of each of #5, 6, 7, 9, 10, 14, 16 & 35

Incl. single items of #25-33

36 Lever assy.

460 190 522

37 Lever support

460 190 504 5 x 336 100 397

23

MKII Regulator with warning 1 a See warning device, page 26

3

4 2

3

5 8

9

7

6

b 4

10

3

8 11

13

7

5

16

12

15

17

18a

18b

15 19

21

# spare part order # notes

1 a Regulator, Psi, RV, SW 99 083-01 Regulator, Psi, RV, SW, HUD 99 083-02 Regulator, Psi, BOV, SW 99 083-03 Regulator, Psi, BOV, SW, HUD 99 083-04 Regulator, Bar, RV, SW 99 083-05 Regulator, Bar, RV, SW, HUD 99 083-06 Regulator, Bar, BOV, SW 99 083-07 Regulator, Bar, RV, SW, HUD 99 083-08 Regulator, Bar, SW 99 083-09 Regulator, Bar, RV, SW, HUD 99 083-10 Regulator, Psi, SW 99 083-11 Regulator, Psi, SW, HUD 99 083-12 1b Regulator, Bar, RV Regulator, Bar, BOV

336 190 377 96 727-01

2 O-ring for #4

336 190 235 10 x 944 610 201

3 O-ring for #4 & 8

336 190 221 10 x 944 610 204

4 High pressure hose

336 190 265 0.63 m

15 20

# spare part order # notes

5 Protective cap, G 5/8"

460 190 557 10 x 336 900 327

6 Swivel, 4 port

See page 27

7 O-ring for #8

336 190 311 10 x 944 610 206

8 Low pressure hose

336 190 288 0.57 m

9 O-ring

336 190 228 10 x 336 900 007

10 O-ring for #11

336 190 237 10 x 336 900 099

11 Breathing valve supply hose

460 190 560

12 O-ring for #11

336 190 236 10 x 944 610 205

13 Plug w. O-ring, BSP1/8"

See page 27

14 -- 15a O-ring for #16 with UNF3/8" 460 190 529 10 x 336 920 009 15b O-ring for #16 with BSP1/8" 460 190 599 10 x 336 900 272

24

MKII Regulator with warning (cont.) # spare part order # notes

16a 16a 16a 16a 16b 16b 16b 16b

Dry suit inflation hose, UNF 3/8" Dry suit inflation hose, UNF 3/8" Dry suit inflation hose, UNF 3/8" Dry suit inflation hose, UNF 3/8" Dry suit inflation hose, BSP 1/8" Dry suit inflation hose, BSP 1/8" Dry suit inflation hose, BSP 1/8" Dry suit inflation hose, BSP 1/8"

97 474-53 97 474-63 97 474-54 97 474-64 97 474-51 97 474-61 97 474-52 97 474-62

0.75 m with locking ring 0.75 m without locking ring 1 m with locking ring 1 m without locking ring 0.55 m with locking ring 0.55 m without locking ring 0.75 m with locking ring 0.75 m without locking ring

17 DIVATOR Second Breathing Hose 99 007-51

3/8" UNF, 1.7 m, 70 inch for 4-port swivel

18a Swivel, BSP 1/8"-BSP1/8" 18b Swivel, BSP 1/8"-UNF3/8"

336 190 348 30 051-01

Incl. #19 & 20 Incl. #19 & 20

19 O-ring for #18

336 190 312

10 x 336 900 105

20 O-ring for #18

336 190 634

10 x 331 900 090

21 BCW inflation hose, UNF3/8" 336 291 131

1.14 m



# SERVICE KIT

order #

Service kit for 1 Swivel, BSP1/8"-BSP1/8" & BSP1/8"-NNF3/8" (#18) - 1 singular item of each of #20 - 2 singular items of each of #19

460 190 906

BOV = Bail-Out Valve RV = Reserve Valve SW = Swivel

25

MKII WARNING DEVICE 18

20

22

21

37

23

24

25

23 30 32

2 8

1

3

5

4

9

31

36 26 10

15 16

RV

11 12 13

7 6 17

35

14

BOV 29

BOV = Bail-Out Valve RV = Reserve Valve

27

34 33

13 38

28

19

# spare part order # notes

# spare part order # notes

22 Screw

336 190 247 10 x 336 900 057

23 O-ring for #24

336 190 235 10 x 944 610 201

24 High pressure hose

460 190 527 0.15 m

25 Retaining clip

460 190 503

26 O-ring for #9

336 190 595 10 x 336 900 165

• Warning device MKII

Incl. #1-29

1 Cap

460 190 421 10 x 336 100 604

2 Split pin

336 190 380 10 x 336 900 104

3 Nut

460 190 441 5 x 336 100 606

4 Handle

460 190 433 5 x 336 100 603

5 Torsion spring

460 190 430 5 x 336 100 605

6 Nipple

460 190 428 5 x 336 100 407

7 O-ring

336 190 381 10 x 336 900 106

8 O-ring

336 190 382 10 x 336 900 103

9 Valve stem

336 190 404 Incl. #8, 10 & 26

10 Valve disc

336 190 383 5 x 336 100 412

11 O-ring

336 190 240 5 x 331 100 562

12 Guide bushing, RV

460 190 439 5 x 336 100 402

13 Spring

460 190 437 5 x 336 100 401

14 Piston, RV

460 190 431 5 x 336 100 400

15 O-ring

336 190 384 10 x 944 610 209

16 Plug

460 190 442 5 x 336 100 403

17 O-ring

336 190 228 10 x 336 900 007

18 Front and back cover

460 190 427

19 Protective cap

336 190 257 3 x 331 100 254

# SERVICE KIT order #

20a Pressure gauge, Bar 20b Pressure gauge, Psi 21a Rubber cover 21b Rubber cover

99 265-51 99 265 -52 99 266-53 96 548-51

Incl. #21 Incl. #21

ervice kit for 1 Warning device S 460 190 908 - 1 single item of each of #2, 4, 5, 7, 8 ,10, 11, 15, 17, 26 & 27

For old pressure gauge

26

27 Cone with O-ring

-

28 Quick coupling

460 190 485 IS

29 Non-return valve

346 190 223 Incl. #27

30 High pressure connection

97 193-51

31 O-ring

336 190 381 10 x 336 900 106

32 Plug 7/16-20 EN250

97 192-51

33 Piston, bail-out valve

96 728

34 HUD warning device

89 100-04

35 O-ring

336 190 238 10 x 944 610 207

36 Gasket set

336 190 159 2 pack

37 Label "Bail Out Regulator"

96 554-51

38 Protective spiral

95 846-53

Incl. #23 & #36 incl. #31

2 pack, 100 mm

MKII regulator 13 12

1

11

2

25

26 27

18

23

22

32 6

14

24 20 19 17 16 15

9

10

7

8

4

6

5

4

28 29

3

31

30

21 36 # spare part order # notes

33 34 32

35

# spare part order # notes

• Pressure regulator

460 190 585

28 Diffusor, Swivel MKII

99 038-51

1 Plug w. O-ring, G1/8"

460 190 418

29 Axis

---

10 x 99 039-01

2 O-ring

336 190 312 10 x 336 900 105

30 O-ring

336 190 237 10 x 336 900 099

3 Cover

460 190 506

31 Swivel house

--460 190 755

4 O-ring

336 190 229 10 x 336 900 041

32 Blank plug with O-ring

5 Diffuser

460 190 564

33 Washer, swivel MKII

99 013-51

10 x 99 013-01

6 Stop ring

460 190 424 5 x 336 100 049

34 Screw, swivel MKII

98 939-51

10 x 98 939-01

7 Piston

460 190 420

35 O-ring for #32

460 190 529 10 x 336 920 009

8 O-ring

336 190 230 10 x 336 900 042

36 Swivel, 4-port

99 014-51

9 Regulating spring

460 190 422 5 x 336 100 422

10 Spring

460 190 484 5 x 336 100 048

11a Inlet filter 11b Inlet filter

346 190 643 10 x 212 100 014 346 190 644 100 x 212 100 014

12a O-ring 12b O-ring

336 190 272 10 x 331 100 767 460 190 237 100 x 331 100 767

13 Nipple

460 190 382

14 Supporting washer

336 190 637 10 x 336 100 131

15 O-ring

336 190 233 10 x 336 900 045

16 Spring

346 190 028 5 x 336 100 280

17 Seat, regulator

460 190 591 10 x 336 100 126

18 O-ring

336 190 231 10 x 336 900 043

19 Adjusting screw

460 190 425 5 x 336 100 127

20 Sealing plate

336 190 256 25 x 336 100 035

21 Valve seat set

460 190 648 Incl. #14-18

22 Anti freezing cap

460 190 507 6 x 336 100 425

23 Anti freezing cover

460 190 523

24 Clamp, stainless

460 190 526

25 Connection nipple

460 190 383

26 O-ring

336 190 232 10 x 336 900 044

27 Hand wheel connector

460 190 385

# SERVICE parts order #

ervice kit MKII - Annual service S - 1 singular item of each of #11, 12 & 22

460 200 507

Service kit for 1 Regulator with 4-port swivel 460 190 756 - 1 single item of each of #4, 8, 11, 12, 15, 17, 18, 20 & 22 - 2 single items of each of #14 & 30 Service kit for 1 Regulator single port 460 190 910 - 1 single item of each of #4, 8, 11, 12, 15, 17, 18, 20 & 22 - 2 single items of each of #14

27

MKII Regulator without warning 20

21, 22

1

14

11

28

5 25 5

24

18

12

7

19

15 13

10

27

3 4a 26

23

29

12

4b

13

6 8

22d

9

11

# spare part order # notes

# spare part order # notes

1 Regulator MKII, 336 191 075 Incl. #5-7, Bar, w/o warning 10-12 & 14-26

22a Rubber cover 22b Rubber cover 22c Rubber cover 22d Rubber cover

99 266-51 99 266-52 99 266-54 96 548-51

23 Non return valve complete

346 190 223

2 -- 3 Dry suit inflation hose

See page 24 -25

4 Swivel

See page 24 -25

5 Protective cap

336 190 257 3 x 331 100 254

6 Breathing valve supply hose

460 190 560

7 Protective cap, G 5/8"

460 190 557 10 x 336 900 327

8 O-ring for #4

336 190 312 10 x 336 900 105

9 O-ring for #4

336 190 634 10 x 331 900 090

10 O-ring for #6 & 15

336 190 237 10 x 336 900 099

11 O-ring for #6

336 190 236 10 x 944 610 205

12 O-ring x2 for #25

336 190 228 10 x 336 900 007

13a O-ring for #3 UNF3/8" 13b O-ring for #3 BSP1/8"

460 190 529 10 x 336 920 009 460 190 599 10 x 336 900 272

14 High pressure hose

460 190 724 0.75 m

15 Low pressure hose

336 190 898 0.65 m

18 O-ring for #14

336 190 221 10 x 944 610 204

19 O-ring till #15

336 190 311 10 x 944 610 206

20 O-ring

336 190 235 10 x 944 610 201

21a Pressure gauge assy, Bar 21b Pressure gauge assy, psi

99 265-51 99 265-52

126 mm w/o hole 58 mm for HUD 126 mm w hole For old pressure gauge

24 O-ring for #26

346 190 069 10 x 944 610 210

25 Extra air manifold, E-10

346 190 040

26 Quick coupling

96 531-51

27 Cone w. O-ring

460 190 369

28 Protective cap strap

88 208-51

29 BC Inflation hose, UNF3/8"

336 291 131 1.15 m

Single pack

# SERVICE KIT order #

ervice kit for 1 Swivel, BSP1/8"-BSP1/8" (#4) 460 190 906 S - 1 single item of each of #9 - 2 single items of each of #8 Service kit for 1 Extra air manifold, E-10 (#25) 460 190 912 - 1 single item of each of #24 & 27 - 2 single items of each of #12

28

MKIII Regulator 1 2 5

3

4

7 8 6

9

# spare part order # notes

1a DIVATOR MKIII Reg w Octopus, Bar 1b DIVATOR MKIII Reg w Octopus, Bar 1c DIVATOR MKIII Reg w Octopus, Psi

30 026-01 30 026-03 30 026-07

with BC hose and Dry suit hose 0.75 m with BC hose and Dry suit hose 1.0 m without BC and Dry suit hoses

2 Plug-in pressure regulator

See page 33

3 CDR valve handle

See page 32

4 Octopus holder

88 115-51

5 Holder strap with hook

See page 30

6 MKIII regulator manifold

See page 32

7 Anti freezing unit MKIII

See page 32

8 High pressure hose

See page 31

9a Pressure gauge



See page 31

10 Breathing hose

See page 30

11 DIVATOR second breathing hose

See page 30

12 Dry suit inflation hose UNF 3/8"

See page 30

13 BCW inflator hose, UNF 3/8"

See page 30

14 BCW inflator hose, UNF 3/8"

See page 30

29

5 x 88 115-01

MKiiI Hoses 4

Hose length

19 19 1

12

10

4

17

6

20

2

13 21

11

11 5

14

19

19 25

18

26

28

24 27 23

15a

15b/c/d

7

12 Service kit see page 28

3

8a

16

1 Pressure gauge assy.

---

2 Holder strap with hook

88 139-52

16

8a

# spare part order # notes

See page 31

8a/b

# spare part order # notes

16 O-ring

336 190 311 10 x 944 610 206

17 Hose w. quick connector female 88 197-51

Euro con. Octopus, 0.49m

3 O-ring

336 190 221 10 x 944 610 204

18 DIVATOR reg. Octopus hose

30 644-51

4 90º connection

88 119-51

19 O-ring

336 190 237 10 x 336 900 099

5 Protective cap

336 190 257 3 x 331 100 254

20 Holder strap, extra air manifold 99 099-51

6 Hose short w. quick connector 88 156-52 for FFM, 0.54 m

21 Holder strap

7 DIVATOR reg. mask hose

30 645-51

22 -

8a O-ring for #16 with UNF3/8" 8b O-ring for #16 with BSP1/8"

460 190 529 10 x 336 920 009 460 190 599 10 x 336 900 272

0.8 m

9 10 Breathing valve supply hose

460 190 560 0.75 m

11 Extra air manifold, E-10

346 190 040

12 O-ring for #11

336 190 228 10 x 336 900 007

13 O-ring

336 190 236 10 x 944 610 205

For Octopus, 1.12m

460 190 561

23 Non return valve complete

346 190 223

24 O-ring for #26

346 190 069 10 x 944 610 210

25a Dry suit inflation hose UNF 3/8" 97 474-53 25a Dry suit inflation hose UNF 3/8" 97 474-63 25a Dry suit inflation hose UNF 3/8" 97 474-54 25a Dry suit inflation hose UNF 3/8" 97 474-64 25b Dry suit inflation hose BSP 1/8" 97 474-51 25b Dry suit inflation hose BSP 1/8" 97 474-61 25b Dry suit inflation hose BSP 1/8" 97 474-52 25b Dry suit inflation hose BSP 1/8" 97 474-62

14 Protective cap strap

88 208-51

Single pack

15a Breathing hose 15b DIVATOR second breath. hose 15c Octopus hose 15d Octopus hose

99 007-53 99 007-51 99 007-52 99618-51

UNF 3/8", 1 m 96 531-51 UNF 3/8", 1.7 m 26 Quick coupling UNF 3/8", 1.13 m 27 Cone with. O-ring 460 190 369 UNF 3/8", 0.827 m 28 BCW inflator hose, UNF 3/8" 30 411-51

30

0.75 m locked 0.75 m unlocked 1 m locked 1 m unlocked 0.55 m locked 0.55 m unlocked 0.75 m locked 0.75 m unlocked

1.15 m

Pressure Gauge ASSemblY

2

6

3

1

5

# spare part order # notes

1 High pressure hose

460 190 724 0.75 m incl # 3 & 6

2 Pressure gauge cover

99 266-54

3 O-ring

336 190 235 10 x 944 610 201

4a Pressure gauge, Bar 4b Pressure gauge, Psi

99 265-51 99 265-52

5 Holder strap with hook

88 139-52

6 O-ring

336 190 221 10 x 944 610 204

31

4

MKIII Regulator UNIT 19 16

17

18

15 2 3 9

10

11

12

13

14

4 2

6

1

5

36

21 22

39

5c

37

38

8

7 23

20

# spare part order # notes

# spare part order # notes

1 CDR handle

88 111-51

13 Nipple

460 190 382

2a Plug-in pressure regulator. 2b Plug-in pressure regulator 2c Plug-in pressure regulator

88 170-01 1/8" parallel 88 170-02 3/8" 90 degree 88 170-03 3/8" parallel

14 O-ring (high pressure)

336 190 272 10 x 331 100 767

15 O-ring

31 189-51

3a Relief valve assy. BSP 1/8 3b Relief valve assy. UNF 3/8

460 190 387 30 660-51

16 Anti freezing cap holder

88 162-51

4 Locking clip

see #4 on page 33

5a Bend protection, CDR 5b Bend protection, DR 5c Bend protection, Ice-dive

88 113-51 88 113-52 31 721-51

black nickel-plated

6 Regulator manifold 7a CDR valve insert Incl. O-rings # 20 (x3) & 22 (x2) 7b CDR valve insert Incl. O-rings # 20 (x3) & 22 (x2)

10 x 31 189-01

17 Anti freezing cap

460 190 507 6 x 336 100 425

18 Anti freezing cover w screw

460 190 763

19 Anti freezing unit

30 028-51

incl. #15, 16, 17 & 18

20 O-ring

346 190 021 10 x 346 900 001

21 Ball, 4 mm

96 599-53

---

22 O-ring

88 137-51

10 x 88 137-01

88 120-51

23 DR-mode locking ring

88 109-51

10 x 88 109-01

24 Spring

346 190 026 5 x 346 100 005

88 120-61

nickel-plated w slot

re-worked

10 x 96 599-03

25 Piston

460 190 386

26 O-ring

346 190 022 10 x 346 190 002

8 Mounting kit, CDR valve 460 190 758 Incl. screw, spring, steal ball #21& O-ring # 22

27 Adjusting screw

460 190 388 5 x 346 100 009

9 Handwheel G5/8"

88 178-51

28 Valve seat set

346 190 023

10 O-ring

336 190 232 10 x 336 900 044

29 O-ring and support ring

460 190 198 10 x 346 900 001 +

11 Connection nipple

460 190 383

12 Inlet filter

346 190 643 10 x 212 100 014



32

95 471-01

MKIII Plug-in pressure Regulator 25

24

A

B

C

26

29 28d

30

34

31

28b

28b 28a

3

33

D

28c

35

4

27

28

32

# spare part order # notes

# SERVICE KIT order #

A Plug-in pressure regulator B Plug-in pressure regulator C Plug-in pressure regulator D Plug-in pressure regulator

Service kit MKIII - Annual service - 1 single items of #12 & 14 - 2 items of #15 & 17

460 190 717

Service kit MKIII regulator unit Regulator manifold - 1 single items of #12 & 14 - 2 items of #15 & 17 Pressure regulator - 2 items of # 26, 28, 29, 30, 31, 33 & 34

460 200 518

88 170-01 88 170-02 88 170-03 88 170-04



1/8" parallel 3/8" 90 degree 3/8" parallel 1/8" parallel + back port

30 O-ring

10 x 31 401-01

31 401-51

31 O-ring

346 190 024 10 x 346 900 004

32 Regulator housing

-

33 Protective band

346 190 053 10 x 346 100 066

34 O-ring

336 190 311 10 x 944 610 206

35a Regulator cover, 2-port 88 193-51 35b Regulator cover, 2-port 88 193-52 35c Regulator cover, 2-port 88 193-53 35d Regulator cover, 2-port 88 193-54

1/8" parallel 3/8" 90 degree 3/8" parallel 1/8" parallel + back port

36 CDR Freeze protection

31 723-51

10 x 31 723-01

37 Screw MC6S 2.5x6

99 725-51

10 x 99 725-01

38 Sealing ring

31 722-51

10 x 31 722-01

39 Ice-dive kit, assembled

31 724-51

Incl #1, 5c,36,37 & 38

33

DIVATOR BCW - Wing type buoyancy compensator 1 2

15

3

3

15

15

10

11 16

14

4 5 13 12

13 12 6

7

8

6

10

9

# SERVICE KIT order #

1 DIVATOR BCW Wing Type

99 095

2a Shoulder strap Small 2a Shoulder strap Medium 2a Shoulder strap Large 2a Shoulder strap X-large

99 540-51 99 540-52 99 540-53 99 540-54

3 DIVATOR BCW inflator assy. 99 552-51 4 Sternum strap assy.

99 542-51

5 Rip-cord assy w. lead fastener

99 543-51

6 Over pressure valve assy

99 545-51

7 Cummerbund waist panel

99 546-01

8 Screw set (male & female)

99 547-51

9a Outer bladder cover assy 9b Inner bladder

99 548-01 99 549-01

incl. #9b & 2 pcs of #6 not shown

10 Rail assy. for BCW

99 550-01

compl. incl. mount

11 Rail for BC

460 190 554

pair

12 DIVATOR BCW mount spacer 99 091-51

pair

13 Screw

99 416-51

10 x 99 416-01

14 Locking assy

99 551-01

15 BCW velcro holder spare kit 460 190 923 1 x 30 640-01 + 1 x 30 640-02 16 Strap separator hook, kit

460 190 924

17 Mouthpiece

99 567-51

18 BCW inflator

99 541-51

19 O-ring 16,3 x 2,4

460 200 526 10 x 331 900 120

5 x 99 567-01

20 DIVATOR BCW Inflator hose 99 363-51 21 BCW exhaust valve gasket

88 444-51

22 DIVATOR BCW Flange valve cap

30 144-51

34

5 x 88 444-01

BCW - accessories 21

26

24 22

17

18

25

23

21

6

28

30

31

32

27 5

8

18

29

19

20

21

3

4 # spare part order # notes

23 Cylinder connector for BCW 99 927-01 24 Protective band

346 190 053 10 x 346 100 066

25 O-ring

336 190 272 10 x 331 100 767

26 Globe sticker

99 259-51

5 pack

27 Elastic cord loop

99 431-51

5 x 99 431-01 5 x 31 703-01

28 Tri-glide D-ring 2"

31 703-51

29 Hose holder

32 062-51

10 x 32 062-01

30 Side release buckle 50 mm

88 351-51

Incl. 5 x #31 & 32

31 Side release buckle, male

88 351-52

5 pack

32 Side release buckle, female

88 351-53

5 pack

35

BCW - exhaust valve assembly

1

2

3

4

# SERVICE KIT order #

1 BCW exhaust valve gasket

88 444-51

2 O-ring, remote exhaust valve 99 571-51 3 Non return exhaust valve

99 572-51

4 Cap for exhaust valve

99 573-51

5 x 88 444-01 10 x 99 571-01

# SERVICE KIT order #

ervice kit BCW Inflator S - 1 single items of #1, 2, 3 & 19 (page 35)

36

460 200 525

Harness - single & cylinder pack 12

6

15

13

5, 11

11

3 4 1

1

16

8

9

11

14

2 10

11

17

11

7

18 19

# spare part order # notes

# spare part order # notes

• Harness, cylinder pack

12 Strap separator hook

336 100 572

13 Locking arm assy

460 190 191

14 Cylinder bracket, blank

336 190 585

15 Washer

336 190 261 10 x 944 482 146

336 190 975 Replaced by



30650-01, see p. 38

• Harness, single 100-140mm • Harness, single 140-183mm

336 190 976 336 190 977

1 Shoulder straps

460 190 524

2 Hip belt buckle assy

346 190 112

3 Webbing buckle

460 190 373 2 x 336 100 115

4 Backplate

460 190 590

5 Clamping plate

460 190 302 10 x 336 100 691

6 Hook

460 190 572

7 Hook

460 190 573

8 Buckle assy. left

346 190 318

9 Buckle assy. right

346 190 319

10 Locking nut

336 190 453 10 x 336 900 184

11 Screw

460 190 575 10 x 941 217 323

16a Cylinder strap, single 100-140mm 336 190 575 16b Cylinder strap, single 140-183mm 336 190 828 17 Threaded washer

460 190 576

18a Handle, single 100-140mm 18b Handle, single 140-183mm

336 190 836 336 190 838

19 Rubber bushing

460 190 597

• Single cylinder mounting kit Single cylinder 100-140mm incl. (3 x #11), #16a, 17 &18a

336 190 837

• Single cylinder mounting kit Single cylinder 140-183mm incl. (3 x #11), #16b, 17 &18b

336 190 839

37

Harness PRO 12

6

4

15

13 5, 11

18

18

11

16 3

3

16

17

14 9

8 1

2

1 10

11

7

# spare part order # notes

# spare part order # notes

• Harness, cylinder pack

30 650-01

1 Shoulder straps

460 190 524

11a Screw 11b Screw M5 x 10, 10 pack

460 190 575 10 x 941 217 323 346 190 190 for use with #17

2 Hip belt buckle assy

346 190 112

12 Strap separator hook

336 100 572

3 Webbing buckle

460 190 373 2 x 336 100 115

13 Locking arm assy.

460 190 191

4 Backplate

460 190 590

14 Cylinder bracket, blank

336 190 585

5 Clamping plate

460 190 302 10 x 336 100 691

15 Washer

336 190 261 10 x 944 482 146

6 Hook

460 190 572

16 D-ring angled 40 mm

30 636-51

7 Hook

460 190 573

17 Octopus hose holder kit

30 643-51

8 Buckle assy. left

346 190 318

18 BCW velcro holder spare kit 460 190 923 pair

9 Buckle assy. right

346 190 319

10 Locking nut

336 190 453 10 x 336 900 184

38

4 x 30 636-01

Cylinder Steel - Single 316 *

Spare parts intended for organizations certified to perform periodic cylinder inspections.

1

2

4

3

# spare part order # notes

1 Cylinder boot

460 190 462 2 pack

2 Label DIVATOR MKII

336 100 467

3 O-ring* M18x1,5

460 190 304 10 x 336 900 338

4 Cylinder valve, DIN 90°*

98 430-13

39

Cylinder Steel - Pack 324 9

*

12 5

Spare parts intended for organizations certified to perform periodic cylinder inspections.

15

7 13

1

11 21 3

20

15 12

15 5 7

2

5 13

14

19

6 4

4 11 15

2

21 3

19

5

16

6

17

10 2

16

18

# spare part order # notes

# spare part order # notes

1 INTERSPIRO label

460 190 230 10 x 95 849-01

18 Cylinder valve*

98 420-10

2 Screw

336 190 241 10 x 941 104 372

19 O-ring*

460 190 304 10 x 336 900 338

3 Guide washer 4 Screw

460 190 472 2 x 336 100 072 336 190 243 10 x 941 104 376

20 Clamping strap assy. 336 190 146 Including single items of 3, 5, 7,12 & 13 and dual items of 11 & 15 21 Spacing washer

460 190 470 10 x 336 100 226

5 Screw, MC6S M6x30

460 190 579 2 x 941 104 374

6 Gasket*

460 190 301 10 x 336 100 305

7 Spacer bushing

460 190 482 2 x 336 100 073

9 Cylinder boot

460 190 460 2 x 331 100 362

10 Cross over tube*

336 190 294 incl. item #6

O-ring, 10 items of #19

11 Retaining plate

460 190 468 10 x 336 100 071

12 Clamping strap

460 190 464

Gasket, 10 items of #6

13 Spacer

336 190 068

14 Nipple*

460 190 582

15 Protective ring

460 190 219 10 x 336 100 068

# SERVICE KIT order #

16 Handle assy. 324, 30 mm neck 460 190 535 17 Nut

336 190 244 10 x 941 680 316

40

460 190 304 460 190 301

Cylinder Steel - Pack 326 *

9 12

8, 5

Spare parts intended for organizations certified to perform periodic cylinder inspections. 28

11

15 29 13

27

1

15 12

15

3

8, 5

11 7

2

30 13

14

19

6 4

4 11 15

2

3 19

16

6

17

10 2

16

18

# spare part order # notes

# spare part order # notes

1 INTERSPIRO label

460 190 230 10 x 95 849-01

14 Nipple*

2 Screw

336 190 241 10 x 941 104 372

15 Protective

ring

460 190 219 10 x 336 100 068

3 Guide washer

460 190 512 2 x 336 100 975

16 Handle section

460 190 583 2 x 331 100 471

4 Screw

336 190 243 10 x 941 104 376

17 Nut

336 190 244 10 x 941 680 316

460 190 582

5 Washer

460 190 580 2 x 944 482 153

18 Cylinder valve*

98 420-10

6 Gasket*

460 190 301 10 x 336 100 305

19 O-ring* M18x1,5

460 190 304 10 x 336 900 338

7 Spacing rod

460 190 620

27 Easy-Fill valve

88 169-51

8 Screw

460 190 581 2 x 336 900 339

28 Plug w. O-ring

460 190 220 Incl. #29

9 Cylinder boot

96 513-51

29 O-ring

336 190 220 10 x 944 610 309

10a Cross over tube* 10b Cross over tube*

460 190 473 88 195-52 for Easy-Fill

2 x 95513-01

11 Retaining plate

460 190 468 10 x 336 100 071

12 Tension strap

96 500-51

13 Spacer

331 100 475

2 x 96 500-01

30 Cylinder ring assy Divator 326 460 190 533 Including single items of 3, 5, 8,12 & 13 and dual items of 11 & 15 # SERVICE KIT order #

O-ring, 10 items of #19 460 190 304 Gasket, 10 items of #6

41

460 190 301

Cylinder Composite - Pack 323.4 12

22

* Spare parts intended for organizations certified to perform periodic cylinder inspections.

15 24

28

27

10 1

12

3

29

8, 14

9

26

13

25 23

** The O-ring #19 shall only be installed

6

on cylinder valves having an O-ring groove. On cylinder valves without O-ring groove no O-ring shall be installed.

2

20

2 3 19**

5

16 17

6 16

18

21

# spare part order # notes

# spare part order # notes

• Cylinder pack 2x3.4L, PED • Cylinder pack 2x3.4L, DOT

98 853-01 98 853-02

17 Nut

336 190 244 10 x 941 680 316

18 Cylinder valve*

98 420-14

1 Spacing rod

97 501-51

19 O-ring* M17x1,5

31 115-51

2 Screw

336 190 241 10 x 941 104 372

20 Nipple*

460 190 626

3 Guide washer

460 190 472 2 x 336 100 072

21 Cross over tube assy*

460 190 313 incl. #6

5 Screw

97 506-52

22 Cylinder boot

460 190 461 2 x 356 100 019

6 Gasket*

460 190 301 10 x 336 100 305

23 Screw

97 506-52

8 Screw

97 506-53

24 INTERSPIRO label

460 190 230 10 x 95 849-01

10 x 97 506-02 10 x 97 506-03

10 x 31 115-01

10 x 97 506-02

9 Nut

97 507-51

10 x 97 507-01

25 Anti slide protection

460 190 467 4 x 356 100 011

10 Weight shaft

97 502-51

10 x 97 502-01

26 Sealing cone assy*

95 601-01

12 Clamping strap 3.4L

460 190 465

27 O-ring

-

10x incl. in 96085

13 Spacer

460 190 474 2 x 356 100 004

28 Support ring

-

10x incl. in 96085

14 Washer

460 190 624 10 x 356 100 008

29 O-ring

-

10x incl. in 96085

15 Protective ring

460 190 219 10 x 336 100 068

16 Handle assembly

356 190 019 incl. #2, 17 & 23

# SERVICE KIT order #

O-ring and support ring kit, M17 Sealing cone 96 085 - 10 items of #27, 28 & 29 Gasket, 10 items of #6 460 190 301 O-ring**, 10 items of #19 31 115-51

42

Cylinder Composite - Pack 326.7 31

12

22

32 8, 14

33

15

13

24

27

28

29 30

10 15 12

11 1

15

3

8, 14 2

9 7

15

20

19

23 11

26

13

25

23

6

2

4

19

5

*

Spare parts intended for organizations certified to

17 2

perform periodic cylinder inspections.

16

6 16

18

21

# spare part order # notes

# spare part order # notes

• Cylinder pack 2x6.7L, PED 98 857-01 • Cylinder pack 2x6.7L, DOT 98 857-02 • Cylinder pack 2x6.7L, Easy-fill 98 857-04

19 O-ring* M18x1,5

460 190 304 10 x 336 900 338

20 Nipple*

96 412-51 97 358-51 88 195-51

PED approved

1 Spacing rod

97 501-51

21a Cross over tube* 21b Cross over tube*

2 Screw

336 190 241 10 x 941 104 372

22 Cylinder boot

460 190 463 2 x 356 100 029

3 Guide washer

97 857-52

23 Screw

336 190 243 10 x 941 104 376

4 Guide washer

97 857-51

24 INTERSPIRO label

460 190 230 10 x 95 849-01

5 Screw

336 190 243 10 x 941 104 376

25 Anti slide protection

97 510-51

6 Gasket*

460 190 301 10 x 336 100 305

26 Sealing cone assembly*

98 813-01

for Easy-Fill

4 pack

7 Screw

97 825-51

10 x 97 825-01

27 O-ring

-

10x incl in 460190103

8 Screw

97 506-51

1 x 97 506-01/-02

28 Support ring

-

10x incl in 460190103

9 Nut

97 507-51

10 x 97 501-01

29 Support ring

-

10x incl in 460190103

10 Weight shaft

97 502-51

30 O-ring

-

10x incl in 460190103

11 Retaining plate

460 190 468 10 x 336 100 071

31 Easy-fill valve

88 169-51

12 Tension strap

97 513-51

32 Plug w. O-ring

460 190 220 Incl. #29

13 Spacer

460 190 474 2 x 356 100 004

33 O-ring

336 190 220 10 x 944 610 309

14 Washer

460 190 624 10 x 356 100 008

15 Protective ring

460 190 219 10 x 336 100 068

# SERVICE KIT

16 Handle assembly

460 190 689 incl. #2, 17 & 23

17 Nut

336 190 244 10 x 941 680 316

18 Cylinder valve*

98 420-08

-ring and support ring kit, M18 Sealing cone 460 190 103 O - 10 items #27, 28, 29 & 30 Gasket, 10 items #6 460 190 301 O-ring, 10 items #19 460 190 304

43

Order #

two TYPES of cylinder VALVE IMPORTANT NOTICE The are two different types of the cylinder valve, Type I and Type II. Cylinder valves delivered under part numbers "98xxx" are Type II. Deliveries of Type II cylinder valves commenced in July 2005. Type II cylinder valves can be identified by the marking with Interspiro logotype, see #1 in picture below. Furthermore the marking #2 according to picture below always beginning with "98xxx", defining the part number of the cylinder valve. Type I cylinder valves have no logotype marking according to #1 in picture below. Type I cylinder valves can have different markings according to #2 in picture below, but never beginning with "98xxx". For spare parts to Type I cylinder valves see page 45. For spare parts to Type II cylinder valves see page 46.

1

2

44

cylinder valve Cylinder valve Type I

*

Spare parts intended for organizations certified to perform periodic cylinder inspections. 16 17

14

13

1

15 18

11 12 3 5

7

6

8

4

10

2

9 19

20

21

# spare part order # notes

# spare part order # notes

1 Hand wheel cover, black

460 190 359

5 x 336 100 061

14 Blank plug*

---

2 Valve slug

336 922 108

5 x 336 190 032

15 O-ring*

460 190 304 10 x 336 190 221

3 Washer

336 190 296 10 x 336 900 008

16 Burst disc rubber plug

336 190 262 10 x 150 040 998

4 Gland seal

336 190 260 10 x 336 100 053

17 Burst plug, 300 Bar*

---

5 Spring

336 922 105 10 x 336 100 058

18 Burst disc kit*

460 190 225

6 O-ring

336 190 221 10 x 944 610 204

19 Plug w. O-ring

460 190 220 Incl. #20

7 Washer

336 922 104 10 x 336 100 057

20 O-ring

336 190 220 10 x 944 610 309

8 Gland nut

460 190 356

21 Discharge plug/Drain plug

460 190 770

9 Hand wheel

460 190 243

22 Valve stem set

336 190 298 Incl. #2, 3 &10

10 Valve stem

460 190 355

11 Screw

336 190 297 10 x 331 900 064

# SERVICE KIT order #

12a O-ring for M17 x 1,5* 12b O-ring for M18 x 1,5*

460 190 331 10 x 96 796-01 460 190 304 10 x 336900338

13 Cylinder support

346 190 230 10 x 336 100 081

ervice kit for 1 Cylinder valve, Type I 460 190 390 S - 1 single item of each of #2, 4 & 6

45

cylinder valve & easy-fill valve Cylinder valve Type II 1

2

3b

4

8

11

5

6

7

10

13

9

14

3a 12

Easy-Fill valve *

13

14

20

15

Spare parts intended for organizations certified to perform periodic cylinder inspections.

22

17

24 21 23

16

18

25

15

19

A

# spare part order # notes

# spare part order # notes

A Easy-fill valve complete

88 169-51

16 Plug w. O-ring

460 190 220 incl. #18

1 Screw

336 190 297 10 x 336 900 094

17 O-ring

336 190 220 10 x 944 610 309

2 Washer

336 190 296 10 x 336 900 093

18 Discharge plug (DIN)

460 190 770

3a Hand wheel assy, black 3b Hand wheel cover, black

460 190 243 460 190 359 5 x 336 100 061

19 Protective plug strap

88 205-51

20 Sealing

--

Part of 460 190 732

4 Spring

336 922 105 10 x 336 100 058

21 Sealing cone

--

Part of 460 190 732

5 Back-up ring

97 847-51

10 x 97 847-01

22 O-ring

--

Part of 460 190 732

6 O-ring

97 851-51

10 x 97 851-01

23 Valve housing

88 165-51

7 Glide washer

97 853-51

10 x 97 853-01

24 O-ring

--

8 Washer

336 922 104 10 x 336 100 057

25 Plug

-

9 Valve slug

97 850-51

10 Valve stem

97 849-51

11 Gland nut

97 852-51

# spare part order #

12 Valve housing

---

13 Burst disc plug*

97 399-51

ervice kit for "Easy-fill" S - 1 single item of each of # 20-22 & 24

14 Burst disc*

97 740-51

15a O-ring for M18 x 1,5* 15b O-ring for M17 x 1,5*

460 190 304 10 x 336 900 338 31 115-51 10 x 31 115-01

Part of 460 190 732

460 190 732

ervice kit for 1 cylinder valve type II 460 190 686 S - 1 single item of each of #7, 8, 9 & 11

46

cylinder Pack Weights

7

8

7

3

10

1

4

9

2

5

6

# spare part order # notes

• Weight, 13.8 kg

97 520-11

For 326.7 incl. 1 pcs of #1 & #8, 2 pcs of #2 & #7

• Weight, 11.4 kg

97 520-12

For 325, 326.7 incl. 1 pcs of #1 & #8, 2 pcs of #3 & 7 For 323.4 Incl. 1 pcs of #1 & #8, 2 pcs of #4 & #7

• Weight, 9.3 kg

97 520-13

1 Weight, upper, 7.2 kg

97 521-51

2 Weight, lower, 3.3 kg

97 522-51

3 Weight, lower, 2.1 kg

97 522-52

4 Weight, lower, 1.1 kg

97 522-53

5 Weight substitute

97 869-51

6 Weight substitute

97 869-52

7 Screw

97 528-51

8 Hair pin assy.

460 190 570

9 Handle protection kit

88 199-51

2 x 97 528-01 2.6 m

10 Handle wire kit, upper weight 460 200 524 Including 2 x 260 mm of #9

47

Weight system

1

2 3 2

# spare part order # notes

1 Buckle, complete (male/female) 460 190 766 6 x 336 900 406 2 Screw

336 190 439 10 x 941 134 224

3 Weight stabilizer

88 356-51

48

5 x 88 356-01

DP1 Surface panel

1 8

7

2 3

11 4

5 6

a 12

10 9

b # spare part

ORDER #

1 Surface panel box

---

2 Whistle insert

---

NOTES

See page 51

# spare part

ORDER #

11 Plug, R5/8”

95 198-51

12 T-piece 300 Bar/4350 Psi

---

See page 58

NOTES

3 Shuttle insert

---

See page 52

4 Hose

---

See page 53

5 Venting insert

460 190 916 See page 55

# SERVICE KIT

ORDER #

ervice kit for 1 Surface unit S One year maintenance

460 190 701

ervice kit for 1 Surface unit S Six year maintenance

460 190 702

6 Connection manifold

---

See page 54

7 Valve block

---

See page 50

8a Label 8b Label 8c Label 8d Label

97 046-51 97 046-52 97 046-63 97 046-99

English Swedish German US English

9 Plug, R5/8” parking

96 718-51

10 Screw

96 723-51

10 x 96 723-01

49

NOTES

DP1 valve block 17

14 18

15

19

16

8

9

11

10

2

12

13

3 1 4 20 5 6 21

7

# spare part

ORDER #

NOTES

# spare part

ORDER #

NOTES

1 Valve block, single assy

346 190 329

2 Hand wheel connect.

460 190 385

13a Rubber cover 13b Rubber cover

99 266-52 96 548-51

For 460 190 381 & ..715

336 190 232 10 x 336 900 044

14 Screw

96 723-51

10 x 96 723-01

336 190 261 10 x 944 482 146

3 O-ring 4 Connection nipple

460 190 383

15 Washer

5a Filter 5b Filter

346 190 643 10 x 212 100 014 346 190 644 100 x 212 100 014

16 Nut

336 190 244 10 x 941 680 316

17 Screw

336 190 243 10 x 941 104 376

6a O-ring 6b O-ring

336 190 272 10 x 331 100 767 460 190 237 100 x 331 100 767

18 Screw

96 723-52

10 x 96 723-02

19 Sleeve

99 226-51

10 x 99 226-01

7 Nipple

460 190 382

20 Cover, Quick Coupling

460 190 753

8 Cylinder support

346 190 230 5 x 336 100 081

21 Plug R5/8

95 198-51

9 Valve block manifold

---

10 Gasket set

336 190 159

# SERVICE KIT

ORDER #

11 Sleeve

336 100 832 460 190 919 Incl. #10 460 190 918 Incl. #10

ervice kit for one HP Connection S Surface unit - 1 single items of each of #5/6

460 190 711

12a Pressure gauge, Bar 12b Pressure gauge, Psi

50

5 x 331 900 31

DP1 Whistle insert 5

1

2

6

7

11

14

3

3a

12

4

13

3c

8

10

15

9

# spare part

ORDER #

460 190 143 Not incl. #9 & 10

12 Whistle cylinder

346 190 248

346 190 220 Incl. #6

13 Sealing cone

346 190 217 10 x 346 100 081

# spare part

ORDER #

• Whistle insert (55 bar) 1 Nozzle with o-ring

3b

NOTES

NOTES

2 Regulating piston

346 190 219 Incl. #7 & 14

14 O-ring

460 190 269 10 x 346 900 015

3 Piston assy.

346 190 216 Incl. #8

15 O-ring & back up rings

460 190 200

4 Sealing label

346 190 296 20 x 97 081-01

5 Whistle assy.

346 190 221

6 O-ring

346 190 251 10 x 346 900 016

7 O-ring

346 190 249 10 x 346 900 014

8 O-ring

336 190 240 5 x 331 100 562

9 Locking clip

346 190 293 10 x 346 100 158

10 Retaining ring

460 190 299 10 x 346 100 208

11 Spring

346 190 218 5 x 346 100 082

10 x 346 900 017 & 95 473-01

# SERVICE KIT

ORDER #

ervice kit for one Whistle S Surface unit - 1 single item of each of #4/6-10/13-15

460 190 323

51

DP1 Shuttle insert 6

1

2

3

a

4

b

c

5

# spare part

ORDER #

NOTES

1 Retaining ring

460 190 299 10 x 346 100 208

2 Locking clip

346 190 293 10 x 346 100 158

3 Shuttle kit

460 190 750

4 O-ring

336 190 220 10 x 944 610 309

5 O-ring

336 190 312 10 x 336 900 105

6 Shuttle insert

460 190 709

# SERVICE KIT

ORDER #

ervice kit for 1 Shuttle insert S Surface unit - 1 single item of each of #1-3 - 2 single items of each of #4 & 5

460 190 712

52

DP1 Hose & Relieving loop

4 5

1

2

2

7

3b-3h

3a

2

9 7

8

6

# spare part

ORDER #

NOTES

1 Connection R5/8”

96 721-51

300 Bar, for 3b-3g

2 O-ring

336 190 312 10 x 336 900 105

3a Hose 3b Hose 3c Hose 3d Hose 3e Hose 3f Hose 3g Hose 3h Hose

96 116-51 99 086-02 99 086-03 99 086-04 99 086-05 99 086-06 99 086-07 99 086-08

1 m, Incl. #2 60 m, Incl. #2 & 4 70 m, Incl. #2 & 4 30 m, Incl. #2 & 4 120 m, Incl #2 & 4 10 m, Incl #2 & 4 90 m, Incl #2 & 4 80 m, Incl #2 & 4 2 x 96 726-01

4 Relieving loop

96 726-51

5 Holder strap with hook

88 139-51

6 Hose bend restrict. kit

460 190 917

Incl. 2 single items of #2

7 Vulcanizing tape

97 045-51

10 m.

8 Line, waxed

96 739-51

5m

9 Protective plug

97 039-51

10 x 97 039-01

53

DP1 Connection manifold

1

2

# spare part

ORDER #

3

4

NOTES

1 Connection manifold

96 786-51

2 Hand wheel connection

460 190 385

3 O-ring

336 190 232 10 x 336 900 044

4 Connection nipple

460 190 383

5a Filter 5b Filter

346 190 643 10 x 212 100 014 346 190 644 100 x 212 100 014

6a O-ring 6b O-ring

336 190 272 10 x 331 100 767 460 190 237 100 x 331 100 767

7 Nipple

460 190 382

54

5

6

7

# SERVICE KIT

ORDER #

ervice kit for one HP connection S Surface unit - 1 single item of each of #5 & 6

460 190 711

DP1 Venting insert

1

2

3

4

5

# spare part

ORDER #

NOTES

1 Retaining ring

460 190 299 10 x 346 100 208

2 Locking clip

346 190 293 10 x 346 100 158

3 O-ring

336 190 220 10 x 944 610 309

4 Venting screw

460 190 751

5 Venting valve, 300 Bar

460 190 916 Incl. #1-4

# SERVICE KIT

ORDER #

ervice kit for one Vent insert S Surface unit - 1 single item of each of #1-3

460 190 713

55

DP1 Regulator, P+

19

28

12 6

20b

13

9

20a

1

2

20b

3 4 5 7 8 10

21 22

23

24

25

26

27

29

11 14 15 16 17 18 30 # spare part

ORDER #

NOTES

1 Anti freezing cover

460 190 523

2 Anti freezing cap

460 190 507 6 x 336 100 425

3 Hose clamp

460 190 526

4 Sealing plate

336 190 256 25 x 336 100 035

5 Adjustment screw

460 190 425 5 x 336 100 127

6 O-ring

336 190 231 10 x 336 900 043

7 Seat, regulator

460 190 591 10 x 336 100 126

8 Spring

346 190 028 5 x 336 100 280

9 Supporting washer

336 190 637 10 x 336 100 131

10 O-ring

336 190 233 10 x 336 900 045

11 Valve seat set

460 190 648 Incl. #6-10

12 Nipple, P+ regulator

---

13 O-ring

336 190 232 10 x 336 900 044

14 O-ring

336 190 221 10 x 944 610 204

15 Blind plug

-

16 Relief valve, 17 Bar

96 724-51

17 Protective band

346 190 053 10 x 346 100 066

Incl. #17/18

18 O-ring

336 190 311 10 x 944 610 206

19 O-ring

336 190 312 10 x 336 900 105

# spare part

ORDER #

NOTES

20a Control spring 20b Control spring

460 190 484 5 x 336 100 048 96 722-51 5 x 96 722-01

21 Piston

460 190 420

22 O-ring

336 190 230 10 x 336 900 042

23 Stop ring

460 190 424 5 x 336 100 049

24 Diffuser

460 190 564

25 O-ring

336 190 229 10 x 336 900 041

26 Cover, P+ regulator

---

27 O-ring

336 190 238 10 x 944 610 207

28 Quick coupling cover

460 190 753 5 pack

29 Quick coupling

460 190 754

30 Regulator, MKII P+

96 720-51

# SERVICE KIT

ORDER #

ervice kit, DIVATOR P+ regulator 460 190 703 S Six year maintenance for one DIVATOR P+ regulator - 1 single item of each of #2, 4, 6, 7, 10, 17, 19, 22 & 25 - 2 single items of each of #9

56

DP1 Accessories

2

1

3

4

7

6

8

5 # spare part

ORDER #

1 Sign “OPEN”

97 335-51

NOTES

2 Pressure relief handle

97 373-51

3 Carbine hook

336 921 843 stainless steel

4 Safety belt

96 741-51

5 Hose winding frame kit

96 745-12

Std size, incl. straps

6 Strap, hose retaining

97 859-51

T-shape

7 Strap, hose retaining

97 860-51

8 W-frame coupling

99 366-51

57

for old version of winding frame

DP1 t-piece 1 2

3 4 5 6

1b

# spare part

ORDER #

NOTES

1a T-piece, curved 1b T-piece, straight

346 190 093 300 Bar/4350 Psi 30 030-51 300 Bar/4350 Psi

2 O-ring, 300 Bar/4350 Psi

336 190 232 10 x 336 900 044

3 a Connection nipple 3 b Connection nipple

460 190 493 Straight 346 100 099 Curved

4 Hand wheel cover

460 190 483 5 x 336 200 036

5 Hand wheel

460 190 495

6a O-ring 6b O-ring

336 190 272 10 x 331 100 767 460 190 237 100 x 331 100 767

7 Nipple

460 190 497

58

7

TOOLS 1

2

3

4

5

6

7

8

9

10

11 12

13

14

15

16

17

55

54 58 18

53

26 27

19

20 21

22

23

24

25

56 52

28 29 30 31

32

33

34

35

36

37

38

39

40

41

42

43

44

45 46 47 48 49 50 51 57 59

# tool order #

# tool order #

1 Control gauge, DIN 300 bar Psi 4350 psi

99 804-01 99 804-02

29 U-spanner, 12 mm

31 236-51

30 U-spanner, 10 - 13 mm

460 190 774

2 Silicone lubricant

331 900 269

31 U-spanner, 14 - 15 mm

460 190 769

3 Lubricant for cylinder valves

331 900 268

32 U-spanner, 16 - 17 mm

460 200 025

4 Locking compound

460 190 846

33 U-spanner, 18 - 19 mm

460 190 775

5 Krytox lubricant

460 200 058

34 U-spanner, 20 mm

460 200 010

6 Awl 100 mm

460 190 768

35 U-spanner, 23 mm

460 200 009

7 Hexagonal wrench 8 mm T-handle

31 496-51

36 U-spanner, 24 mm

99 519-51

8 Hexagonal key

460 200 008 460 200 522

37 U-spanner, 25 mm

460 200 026

38 U-spanner, 26 mm U-spanner, 28 mm

31 282-51 460 200 527

39 Circlip pliers

460 200 519

40 Long nosed pliers

460 190 772

5 mm 3 mm

9 Screwdriver, PZ-1 PZ-2

460 200 028 460 200 011

10 Screwdriver 1 x 5,5

460 190 767

11 Protective pin

460 190 565

12 Punch tool

460 190 566

13 O-ring tool kit

30 042-51

14 Fixture whistle

460 190 848

15 Multi-fixture for MKIII

31 207-01

16 Fixture for P+regulator

460 190 855

17 Ball hammer

---

18 Torque wrench assy 5-50 Nm

336 190 478

19 Torque wrench adapter 8 mm

30 223-51

20 Torque wrench adapter 19 mm

99 502-51

21 Torque wrench adapter 20 mm

95 998-20

22 Torque wrench adapter 25 mm 29 mm

30 719-51 99 534-51

23 Torque wrench adapter 13 - 15 mm

460 190 852

24 Torque wrench adapter 17 - 18 mm

460 200 515

25 Torque wrench adapter 21 - 26 mm

460 190 773

26 Level Bar tool

30 004-51

99 211-01 460 190 567

43 Socket, Cylinder valve

460 190 568

44 Socket long, 15 mm

460 200 029

45 Socket, 5 mm hexagonal

460 200 520

46 Socket, 8 mm hexagonal

460 200 031

47 Assembly tool, plug-in reg.

95 925-01

48 Assembly tool, whistle

95 926-01

49 Socket, whistle

460 190 849

50 Locking clip tool

30 550-51

51 Barrel brush

460 200 030

52 Socket Torx T30

99 533-51

53 Punch tool, DP1 shuttle valve

31 272-51

54 Discharge plug (DIN)

460 190 770

55 Fixture Warning manifold

97 951-51

56 Adjusting key

460 190 853

57 Mounting tool Hose bend restrictor 88 233-51

27 Filling adaptor DIVATOR Lite cylinder 99 369-01 28 U-spanner, 8 mm

41 Piston extractor 42 Socket, slotted, 19 mm

460 200 516

59

58 Fixture for manifold

460 190 850

59 Fixture for manifold, DP1

95 927-01

AUSTRIA

INTERSPIRO GesmbH www.interspiro.de Feldbacher Str. 3 A-8200 GLEISDORF AUSTRIA TEL +43 (0)311 236 133 FAX +43 (0)311 236 133 22 E-MAIL [email protected]

GERMANY

INTERSPIRO GmbH www.interspiro.de Postfach 1220 D-76691 FORST/BADEN GERMANY TEL +49 (0)7251 8030 FAX +49 (0)7251 2298 E-MAIL [email protected]

SWITZERLAND

INTERSPIRO AG www.interspiro.de Güterstraße 47 CH-4133 PRATTELN SWITZERLAND TEL +41 61 827 99 77 FAX +41 61 827 99 70 E-MAIL [email protected]

THE NETHERLANDS & BELGIUM

INTERSPIRO BV www.interspiro.nl Operetteweg 35 NL-1323 VK ALMERE NETHERLANDS TEL +31 (0)36 5363103 FAX +31 (0)36 5384809 E-MAIL [email protected]

NORTH & SOUTH AMERICA INTERSPIRO Inc. www.interspiro-us.com 10225 82nd Avenue PLEASANT PRAIRIE WI 53158-5801 USA TEL +1 262 947 9901 FAX +1 262 947 9902 E-MAIL [email protected] UNITED KINGDOM & IRELAND INTERSPIRO Ltd. www.interspiro.com 7 Hawksworth Road Central Park TELFORD Shropshire TF2 9TU UNITED KINGDOM TEL +44 (0)1952 200 190 FAX +44 (0)1952 299 805 E-MAIL [email protected] SCANDINAVIA, ASIA/PACIFIC & MIDDLE EAST

SWEDEN

NORDIC & EXPORT SALES DIVISION www.interspiro.com Box 10060 S-181 10 LIDINGÖ SWEDEN TEL +46 8 636 51 00 FAX +46 8 636 51 99 E-MAIL [email protected]

MALAYSIA

NORDIC & EXPORT SALES DIVISION www.interspiro.com 305 & 305A Lorong Perak Taman Melawati 53100 KUALA LUMPUR MALAYSIA TEL +60 3 4105 8122 FAX +60 3 4105 3122 E-MAIL [email protected]

PART NO. 30924E01

CENTRAL EUROPE