KF Series B and BH Ball Valves Optional Actuation Mounting Pattern D
1 • Carbon Steel
Body & Adapter 2 • Stainless Steel 3 • Enduro-Bond™ CS Body/Adapter (And External Parts) 5 • SS Body w/LT Carbon Steel Adapters (LF2) 8 • Low Temp Carbon Steel
End Connections 1 • Female x Female
D
D
4 • Socket Weld x Socket Weld 5 • Socket Weld x Female 6 • Socket Weld x Male A • CS w/Anti-static B • SS w/Anti-static
2 • Male x Female 3 • Male x Male
Trim 1 • Carbon Steel (Ball & Stem) 2 • Stainless Steel
G
6 • HT4 (PEEK™)/EPDM 7 • HT4 (PEEK™)/Aflas® 8 • HT4 (PEEK™)/PC Buna N
1 • Delrin/Buna N
Seat & 2 • Teflon®/None* 3 • Delrin/Viton® Seat Seals 4 • HT4/LT Buna N
9 • Delrin/ PC Buna N
F
5 • HT4/Viton® 1 • Handle 3 • Handle w/Locking Device Actuation 5 • Handle SS (For CS Body Only) 6 • Handle SS w/Locking Device (For CS Body Only) 7 • Oval Handle A • For Actuation (Topworks data consult factory)
Assembly Base No.
XXXX - X X X X X
A
C B
*Not available for the Series BH.
Assembly Base Numbers Valve Size (in.) Rating (psi) Series Std. B Secured Adapt. Rating (psi) Series Std. BH Secured Adapt.
Dimensional Data (in.)
1/4 FP 1/2 FP 3/4 FP
6100802061128030-
1RP 1FP 11/2 FP 3000 (2220 for PTFE Seats) 6102- 6103- 6104- 6105- 61078022- 8023- 8024- 8025- 80275000 6114- 6115- 6116- 6117- — 8032- 8033- 8034- 8035- —
2 RP 61088028-
Valve Size (in.) Dimension Weight lbs.* A FxF MxM FxM SWxSW SWxF SWxM Female Std. Handle Locking Handle Std. Handle Locking Handle
— — B
14 15 12
B
B 1" Bore And Larger
13
C
10
F
9
G
1
3
8 17
4
1FP 11/2 FP 2RP 1x1
2 2 1/2 1/4 3 4 3 13/16 4 7/16 3 3/8 4 1/4 5 6 1/4 4 4 1/2 4 3/8 4 3/4 1 1/2 2 5 2 /8 1 7/8 4 15/16 3 13/16
2.5
2.5 3/4
4 1/4 5 1/8 4 11/16 6 1/2 5 1/4 5 11/16 2 1/8 3 3/4 2 3/8 5 7/8 4 5/16
11/2 x11/2 2x11/2
5 10.75 10.75 1 11/2 4 1/2 5 1/4 6 1/4 — 7 3/8 — 6 13/16 7 1/2 8 1/2 5 1/2 6 3/8 7 3/8 — 7 15/16 2 1/4 2 5/8 3 1/8 3 1/4 4 3 1/16 3 15/16 8 1/4 11 8 12
7
5
2
1RP 1x 3/4
* Handle weight included.
11
5 7
1/4 FP 1/2 FP 3/4 FP 1/4 x 1/4 1/2 x 1/2 3/4 x 3/4
2 8
Parts List and Materials Index Description 1 Body 2 Adapter 3 Stem 4 Ball*** 5 Adapter Gasket 7 Seat 8 Seat Seal**
Material CS, SS or LCC AISI 1018 CS or AISI 316 SS or A350 Gr. LF2 Low Temp. Plated 12L14 Carbon Steel or 316 Stainless Steel Plated 12L14 Carbon Steel or 316 Stainless Steel Virgin PTFE Delrin, or HT4 (PEEK™), PTFE* Buna N, Viton®, PC Buna N, EPDM, Aflas®
*Not available in Series BH ball valves. ** Not required when using PTFE seats. *** 1/2" ball is 316SS standard.
Index Description 9 Stem Washer 10 Packing 11 Thrust Bearing 12 Handle Assem. 13 Packing Nut 14 Handle Nut 15 Lock washer 17 Set Screw
Material Body only-316 Stainless Steel RTFE (Std.), Grafoil® (Optional) Coated 316 Stainless Steel, 1"FP-2"RP PTFE or HT4 (PEEK™) Carbon Steel or 304 Stainless Steel 316 Stainless Steel Carbon Steel or 316 Stainless Steel Carbon Steel or 316 Stainless Steel Carbon Steel or 316 Stainless Steel 1/ 2"
KF Threaded Ball Valves
5
KF Series A and AH Ball Valves Trim (Ball & Stem) 1 • Carbon Steel
A • Carbon Steel w/Freeze B • Stainless Steel w/Freeze
2 • Stainless Steel
N SQ.
J
K
7 • HT4 (PEEK™)/Aflas® 8 • Nylon/PC Buna N 9 • Teflon®/PC Buna N D • HT4 (PEEK™)/PC Buna N E • HT4 (PEEK™)/HNBR
1 • Nylon/HNBR 2 • Teflon® /Viton® Seat & Seals 3 • Nylon/Viton® 4 • Teflon®/HNBR 5 • HT4 (PEEK™)/Viton® 6 • HT4 (PEEK™)/EPDM
LM
H Square Nut G
Coating 3 • Enduro-Bond™ Body/Adapter 9 • None
H F
Actuation 1 • Handle
2 • Square Nut 9 • Bare Stem
E U
Options 1 • Standard 2 • With Anti-Static Device
A Port
Assembly Base No.
C
XXXX - X X X X X
Assembly Base Numbers Valve Size (in.) Rating (psi) Series Thrd. A Grvd. Rating (psi) Series Thrd. AH Grvd.
1FP
2979- 29802987- 2988-
2FP 21/2 RP 3RP 3FP 4RP 1500 2341- 2342- 2343- 2344- 2345- 23462348- 2349- 2350- 2351- 2352- 23532000 (1500 for PTFE Seats) 2981- 2982- — 2984- — — 2989- — — — — —
39 9 11
10
13
3 4
12 7 6
8
2 7
1
5
Parts List and Materials Index Description 1 Body 2 Adapter 3 Stem 4 Ball 5 Body Seal 6 Stem Bearing 7 Seat
6
Material ASTM A395 Ductile Iron ASTM A395 Ductile Iron Carbon Steel/Zinc Plated or 316 Stainless Steel 1215 CS w/Chrome over Ni. Plating or 316 SS HNBR, Viton®, PC Buna N, EPDM, Aflas® Nylon Nylon, Reinforced Teflon® or HT4 (PEEK™)
KF Threaded Ball Valves
B
Dimensional Data (in.)
11/2 FP 2RP
2339- 23402354- 2347-
B
Valve Size (in.) 1FP 11/2 FP 2RP 2FP 21/2 RP 3RP Dimension 1x1 11/2 x11/2 2x11/2 2x2 2 1/2 x 2 3x2
3FP
4RP
3x3
4x3
Weight lbs.* A Thrd. B Grvd. C E F G H J K L M N U
52
46
4.5 1 4 4 7/8 2 1 2 /2 3 1/16 6 1/4 25/32 .623/.621 .372/.370 – – – 1 23/32
13
12.5
18
16.25 2
1 1/2 5 1/2 6 2 3/4 3 21/32 5 15/32
6 7 5/16 6 1/4 7 5/16 3 4 1/8 3 4 /32 6 1/16 8 1/2 1 1/32 .873 /.871 .560 /.556 1 1 3/4 1 7/16
2 5/8
22
3 1/16
3 8 3/4 8 3/4 4 3/8 5 11/32 6 25/32 15 1 3/8 1.248 / 1.245 .621 /.618 1 1/8 2 3/16 1 13/16 4
* Handle weight included.
Square Nut not illustrated, see Dimensional Data information above.
Index Description 8 Stop 9 Stem Seal 10 Thrust Bearing 11 Handle/Sq. Nut 12 Stop Plate 13 Retainer 39 Weather Seal
Material Steel HNBR, Viton®, PC Buna N, EPDM, Aflas® Teflon® (HT4 when using Hi-Temp Seats & Seals) 1018 Carbon Steel (1"FP), A47 Malleable Iron Steel, Plated Spring Steel Buna N Only
KF Series AF and AFH Ball Valves
Square Nut
Trim (Ball & Stem) 1 • Carbon Steel (Non-NACE) A • Stainless Steel (NACE II) And Bolting 2 • Stainless Steel (NACE III) B • Stainless Steel (Non-NACE)
J
N SQ.
K
1 • Nylon /HNBR 2 • Teflon®/Viton® * Nylon/Viton® Seat & Seals 43 •• Teflon ® /HNBR* 5 • HT4 (PEEK™)/Viton® 6 • HT4 (PEEK™)/EPDM
LM
H
C • CS w/FREEZE (Non-NACE) D • SS w/FREEZE (NACE II)
7 • HT4 (PEEK™)/Aflas® 8 • Nylon/PC Buna N 9 • Teflon®/PC Buna N D • HT4 (PEEK™)/PC Buna N E • HT4 (PEEK™)/HNBR
G
H
Coating 3 • Enduro-Bond™ Body/Adapter
F
9 • None
E
Actuation 1 • Handle
2 • Square Nut 9 • Bare Stem
U A Port
Options 1 • Standard 2 • With Anti-Static Device
Assembly Base No.
C
XXXX - X X X X X
Assembly Base Numbers Valve Size (in.) Rating (psi)* Series AF Rating (psi)* Series AFH
2RP
Dimensional Data (in.)
2FP 1500 63782000 6384-
63776383-
3RP
3FP
4RP 1000
6379-
6380 — —
6385
6381 — —
*PTFE seats rated to 1500 psi for Series AFH.
39 9
11 10 13
3 7
12
4 7
6
8
14 2
1
B
5
Valve Size (in.) Dimension Weight lbs.* A B C E F G H J K L M N U
2 RP
2 FP
3 RP
3 FP
4 RP
2 x 1 1/2
2x2
3x2
3x3
4x3
12.5 1 1/2 5 3/32 2 35/64 3 21/32 5 15/32
21
25
60
53
2 5/8
2 7 5/16 4 1/8
6 3 4 3/32 6 1/16 8 1/2 1 1/32 .873 /.871 .560 /.556 1 1 3/4 1 7/16 3 1/16
3 8 3/4 4 3/8 5 11/32 6 25/32 15 1 3/8 1.298 / 1.245 .621 / .618 1 1/8 2 3/16 1 13/16 4
* Handle weight included.
Parts List and Materials Index Description 1 Body 2 Adapter 3 Stem 4 Ball 5 Body Seal 6 Stem Bearing 7 Seat 8 Stop
Material ASTM 395 Ductile Iron ASTM 395 Ductile Iron Carbon Steel/Zinc Plated or 316 Stainless Steel 1215 CS w/Chrome over Ni. Plating or 316 SS HNBR, Viton®, PC Buna N, EPDM, Aflas® Nylon Nylon, Reinforced Teflon® or HT4 (PEEK™ ) Steel
Index Description 9 Stem Seal 10 Thrust Bearing 11 Handle/Sq. Nut 12 Stop Plate 13 Retainer 14 Cap Screw 39 Weather Seal
Material HNBR, Viton®, PC Buna N, EPDM, Aflas® Teflon® (HT4 when using HT4 Seats) A47 Malleable Iron Steel, Plated Spring Steel Carbon Steel B7 (NACE III), B7M (NACE II) Buna N Only
KF Threaded Ball Valves
7
KF Series C, CH and CXH Ball Valves Body/Ball & Stem 1 • Carbon Steel/Carbon Steel
A • Carbon Steel w/Freeze 2 • Carbon Steel/Stainless Steel B • Stainless Steel w/Freeze † 7 • Stainless Steel/Stainless Steel
1 • Nylon /HNBR 2 • Teflon®/Viton® * Seat & Seals 3 • Nylon /Viton® 4 • Teflon® /HNBR* 5 • HT4 (PEEK™)/Viton® 6 • HT4 (PEEK™)/EPDM
N SQ.
J
K
LM
H
7 • HT4 (PEEK™)/Aflas® 8 • Nylon/PC Buna N 9 • Teflon® /PC Buna N* D • HT4 (PEEK™)/PC Buna N E • HT4 (PEEK™)/HNBR
Square Nut G
Coating 3 • Enduro-Bond™ Body/Adapter 9 • None
H F
Actuation 1 • Handle
2 • Square Nut 9 • Stem Only
E U
Options 1 • Standard (w/o Anti-Static Device) 2 • With Anti-Static Device
A Port
*Teflon® Seats not available in Series CH or CXH †SS body not available Series CXH or in 4"FP Series CH
Assembly Base No.
C
XXXX - X X X X X
Assembly Base Numbers Valve Size (in.) Nylon Rating HT4 (psi) PTFE Series Thrd. C Grvd. Rating (psi) Series CH Rating (psi) Series CXH
1 FP 1 1/2 FP 2 RP
2160
1500 1500 1477- 1500- 1501- 1502- 15031478- 1507- 1508- 1509- 15103000 3001- 3002- 3003- 3004- 30055000 5050- 5051- 5052-
3FP
1500 2160
4RP
1500
4FP 750
1000 1000 1000 750 3798- 1504- 1505- 1506- 36043799- NA 1512- 1513- 36052000 — 3006- 3007- 3008- 3363-
39 9 10 11 4 7
12 6
3 7
13 8
2 1
B
Dimensional Data (in.)
2FP 2 1/2 RP 2 1/2 FP 3RP
2500
B
Valve Size(in.) 1FP 11/2 FP 2 RP 2 FP 21/2 RP 21/2 FP 3RP 3 FP 4RP Dimension 1 x1 11/2 x11/2 2x1 1/2 2 x 2 2 1/2 x 2 21/2x21/2 3 x 2 3 x 3 4 x 3 Weight lbs.* 4.5 13 12.5 18 16.25 20 22 52 46 1 1 A 1 1 /2 2 2 /2 2 3 Thrd. 4 5 1/2 6 7 8 1/4 8 3/4 B Grvd.** 4 7/8 6 6 1/4 7 NA 8 3/4 C 2 2 3/4 3 3 3/8 4 1/8 4 3/8 1 21 3 1 3 E 2 /2 3 /32 4 /32 5 /32 4 /32 5 11/32 F 3 1/8 5 15/32 5 29/32 6 15/32 5 29/32 6 25/32 8 1/2 15 8 1/2 15 C 6 1/4 G CH 6 1/4 8 1/2 15 8 1/2 15 25 11 3 1 H /32 /32 1 /8 1 /32 1 3/8 1.248 /1.245 .623 /.621 .873 /.871 1.248/1.245 .873 /.871 J .372 /.370 .560 /.556 .621/.618 .560/.556 .621 /.618 K L – 1 1 1/8 1 1 1/8 3 3 3 3 M – 1 /4 2 /16 1 /4 2 /16 N – 1 7/16 11 3/16 1 7/16 1 13/16 U 1 23/32 2 5/8 3 1/16 3 21/32 3 1/16 4 * Handle weight included. ** Series C only.
5
Parts List and Materials Index Description 1 Body 2 Adapter 3 Stem 4 Ball 5 Body Seal 6 Stem Bearing 7 Seat
8
Material A216 WCB/A105 CS, A351 Gr. CF8M A216 WCB/A105 CS, A351 Gr. CF8M CS/Zinc Plated or 316 SS, 17-4 SS 1215 CS w/Chrome over Nickel Plating or 316 SS HNBR, Viton®, EPDM, Aflas®, PC Buna N Nylon Nylon (Delrin in Ser. CH, CXH), RTFE (Ser. C only) or HT4 (PEEK™)
KF Threaded Ball Valves
Index Description 8 Stop 9 Stem Seal 10 Thrust Bearing
Material Steel HNBR, Viton®, EPDM, Aflas®, PC Buna N Teflon® (HT4 when using Hi-Temp Seats & Seals)
11
Handle/Sq. Nut
1018 Carbon Steel (1"FP), A47 Malleable Iron (11/2"FP-4"RP) & A216 Gr. WCB (4"FP)
12 13 39
Stop Plate Retainer Weather Seal
Steel, Plated Spring Steel Buna N Only
4FP 4x4
58 4 9 3/8 9 3/8 4 11/16 6 1/2 81/16 18 48 1 1/2 1.373/1.371
.747/.743
2 5
KF Series CF, CFH and CFXH Ball Valves Trim (Ball & Stem) 1 • Carbon Steel (Non-NACE) A • Stainless Steel (NACE II) And Bolting 2 • Stainless Steel (NACE III) B • Stainless Steel (Non-NACE) 1 • Nylon / HNBR 2 • Teflon® / Viton® * 3 Nylon / Viton® Seat & Seals 4 •• Teflon ® / HNBR* 5 • HT4 (PEEK™) / Viton® 6 • HT4 (PEEK™) / EPDM
Square Nut J
N SQ.
K
LM
H
7 • HT4 (PEEK™) /Aflas® 8 • Nylon / PC Buna N 9 • Teflon® / PC Buna N* D • HT4 (PEEK™) / PC Buna N E • HT4 (PEEK™)/HNBR
G
Coating 3 • Enduro-Bond™ Body/Adapter 9 • None
H F
Actuation 1 • Handle 2 • Square Nut 9 • Bare Stem
E
U
Options 1 • Standard 2 • With Anti-Static Device
Assembly Base No.
A Port
*Teflon® Seats not available in Series CF or CFXH
C
XXXX - X X X X X
Assembly Base Numbers Valve Size (in.) Rating (psi)* Series CF Rating (psi) Series CFH Rating (psi) Series CFXH
2 RP 2500 6389-
Dimensional Data (in.) 2 FP
3 RP
3 FP
4 RP 1500 63926393-
2160 6390-
63955000 6375-
6396-
63913000 6397-
6398-
6399-
*CF Teflon® seats rated 1500 psi only 2"RP. CF Teflon® seats rated 1000 psi only 3"FP-4"RP. 39 9 11
10
13
6
3 7
4
12
7 8 14 2
1
B
5
Valve Size (in.) Dimension Weight lbs.* A CF/CFH B CFXH CF/CFH C CFXH E F G H J K L M N U
2 RP
2 FP
3 RP
3 FP
4 RP
2 x 1 1/2
2x2
3x2
3x3
4x3
12.5 1 1/2 5 3/32 5 1/2 2 35/64 2 3/4 3 21/32 5 15/32
21
25
60
53
2 5/8
2 5 3/4 5 3/4 2 7/8 2 7/8
3 8 1/8 8 1/8 4 1/16 4 1/16 5 11/32 6 25/32
7 1/4 7 1/4 3 5/8 3 5/8
4 3/32 5 29/32 8 1/2 1 1/32 .873 /.871 .560 /.556 1 1 3/4 1 7/16 3 1/16
15
18 1 3/8 1.248 / 1.245 .621 / .618 1 1/8 2 3/16 1 13/16 4
* Handle weight included.
Parts List and Materials Index Description 1 Body 2 Adapter 3 Stem 4 Ball 5 Body Seal 6 Stem Bearing 7 Seat 8 Stop
Material A216 WCB A216 WCB Carbon Steel/Zinc Plated or 316 Stainless Steel 1215 CS w/Chrome over Ni. Plating or 316 SS HNBR, Viton®, PC Buna N, EPDM, Aflas® Nylon Nylon (Delrin in Ser. CFH & CFXH), Reinforced Teflon® or HT4(PEEK™) Steel
Index Description 9 Stem Seal 10 Thrust Bearing 11 Handle/Sq. Nut 12 Stop Plate 13 Retainer 14 Cap Screw 39 Weather Seal
Material HNBR, Viton®, PC Buna N, EPDM, Aflas® Teflon® (HT4 when using HT4 Seats) A47 Malleable Iron Steel, Plated Spring Steel Carbon Steel B7 (NACE III), B7M (NACE II) Buna N Only
KF Threaded Ball Valves
9
KF Series CA and CAH Ball Valves Trim (Ball & Stem) 1 • Carbon Steel
A • Carbon Steel w/Freeze B • Stainless Steel w/Freeze
2 • Stainless Steel 1 • Nylon / HNBR 2 • Teflon® / Viton® * Seat & Seals 3 • Nylon / Viton® 4 • Teflon® / HNBR* 5 • HT4 (PEEK™) / Viton® 6 • HT4 (PEEK™) / EPDM
K
J
N SQ. H
7 • HT4 (PEEK™) /Aflas® 8 • Nylon / PC Buna N 9 • Teflon® / PC Buna N* D • HT4 (PEEK™) / PC Buna N E • HT4 (PEEK™)/ HNBR
Square Nut
G
Coating 3 • Enduro-Bond™ Body/Adapter 9 • None
Actuation 1 • Handle
H
2 • Square Nut 9 • Bare Stem
F E
Options 1 • Standard (w/o Anti-Static Device)
U
2 • With Anti-Static Device
AD Assembly Base No.
*Teflon® Seats not available in Series CAH
C
XXXX - X X X X X
B
Assembly Base Numbers
Dimensional Data (in.)
2 1/16 FP - 2 3/8 EUE 2 9/16 FP - 2 7/8 EUE 2000 (1000 for PTFE Seats) 159015913000 20052006-
Valve Size (in.) Rating (psi) Series CA Rating (psi) Series CAH
39 11
9
13
10 3
12
4 7
6
8
2 7 5
1
Valve Size (in.) Dimension Weights (lbs.)* A B C D E F G H J K N U
2 3/8 EUE X 2 1/16 Bore
2 7/8 EUE X 2 9/16 Bore
28 2 1/16 8 1/2 4 1/4 4 5/8 4 3/4 6 3/16
36 2 9/16 9 3/4 4 3/4 5 1/8 5 1/32 6 15/32 15 1 3/8 1.248 /1.246 .622 /.618 1 13/16
3 13/32
3 21/32
* Handle weight not included
Parts List and Materials Index Description 1 Body 2 Adapter 3 Stem 4 Ball 5 Body Seal 6 Stem Bearing 7 Seat
Material ASTM A487 Gr. 4C Carbon Steel ASTM A487 Gr. 4C Carbon Steel Carbon Steel/Zinc Plated or 316 Stainless Steel 1215 CS w/Chrome over Nickel Plating or 316 SS HNBR, Viton®, PC Buna N, EPDM, Aflas® Nylon Nylon (Delrin in CAH), Reinforced Teflon® or HT4 (PEEK™)
10 KF Threaded Ball Valves
Index Description 8 Stop 9 Stem Seal 10 Thrust Bearing 11 Handle/Sq. Nut 12 Stop Plate 13 Retainer 39 Weather Seal
Material Steel HNBR, Viton®, PC Buna N, EPDM, Aflas® Teflon® (HT4 when using Hi-Temp Seats & Seals) 1018 Carbon Steel or A47 Malleable Iron Steel, Plated Spring Steel Buna N Only
KF Series CB and CBH Ball Valves Trim (Ball & Stem) 2 • Stainless Steel 1 • Nylon / HNBR ® ® Seat & Seals 2 • Teflon / Viton® *
3 • Nylon / Viton 4 • Teflon® / PC Buna N* 5 • HT4 (PEEK™) / Viton®
LM
H
6 • HT4 (PEEK™) / EPDM 7 • HT4 (PEEK™) / Aflas® 8 • Nylon / PC Buna N 9 • Teflon® / PC Buna N*
1 • Handle 2 • Square Nut Actuation 3 • Handle w/Ribbon Seal Pin 4 • Square Nut w/Ribbon Seal Pin 8 • Stem Only w/Ribbon Seal Pin 9 • Stem Only
N SQ.
J
K
5 • Monel
Square Nut G
H F E U
Options 1 • Standard 2 • With Anti-Static Device
A Port Assembly Base No.
XXXX - X X 9 X X
C
*Teflon® seats not available in Series CBH.
Assembly Base Numbers Valve Size (in.) Nylon Rating HT4 (psi) PTFE Series Thrd. CB Grvd. Rating (psi) Series CBH
1 FP
2 FP
2500
2160
1500
1500 33543374-
335333733000 6072-
6070-
6073-
39 9 10
11
3
13 12
4 7 8
6
2 7
1
B
Dimensional Data (in.) 2 RP
33513371-
B
5
Valve Size (in.) Dimension Weight lbs.* A Thrd. B Grvd. C E F G H J K L M N U
1 FP 1x1 4.5 1 4 4 7/8 2 1 2 /2 3 1/8 6 1/4 25 / 32 .623 / .621 .372 /.370 — — — 1 23/32
2 RP 2 x 11 / 2 12.5 1 1/2 5 1/2 6 2 3/4 3 21/32 5 15/32
2 FP 2x2 18 2 6 6 1/4 3 3 4 /32 5 29/32 8 1/2 11 / 32 .873 / .871 .560 / .556
1 1 3/4 1 7/16 2 5/8
3 1/16
*Handle weight included.
Parts List and Materials Index Description 1 Body 2 Adapter 3 Stem 4 Ball 5 Body Seal 6 Stem Bearing 7 Seat
Material Ni-Aluminum Bronze, B-148-955 Ni-Aluminum Bronze, B-148-955 316 Stainless Steel or Monel 316 Stainless Steel or Monel Alloy 400 HNBR, Viton®, EPDM, Aflas®, or PC Buna N Nylon Nylon (Delrin in Ser. CBH), RTFE (Ser. CB only), or HT4 (PEEK™)
Index Description 8 Stop 9 Stem Seal 10 Thrust Bearing 11 Handle/Sq. Nut 12 Stop Plate 13 Retainer 39 Weather Seal
Material Steel HNBR, Viton®, EPDM, Aflas®, or PC Buna N Teflon® (HT4 when using Hi-Temp Seats & Seals) 1018 CS (1FP), A47 Malleable Iron (1 1/2 FP-2FP) Steel, Plated Spring Steel Buna N Only
KF Threaded Ball Valves 11
KF Series E, EH, and EC Ball Valves 1 • Carbon Steel Trim (Ball & Stem) 2 • Stainless Steel 7 • Series EC Only - All Stainless Steel A • Carbon Steel w/ Freeze B • Stainless Steel w/Freeze 1 • Nylon / HNBR 2 • Teflon® / Viton® Seat & Seals 3 • Nylon / Viton® 4 • Teflon® / HNBR 5 • HT4 (PEEK™) / Viton® 6 • HT4 (PEEK™) / EPDM
N SQ.
J
K
LM
H Square Nut G
7 • HT4 (PEEK™) / Aflas® 8 • Nylon / PC Buna N 9 • Teflon® / PC Buna N D • HT4 (PEEK™) / PC Buna N E • HT4 (PEEK™) / HNBR
H F
Coating 3 • Enduro-Bond™ Body/Adapter
E
9 • None
U
Actuation 1 • Handle 2 • Square Nut 3 • Bare Stem
A Port
Options 1 • Standard 2 • With Anti-Static Device
Assembly Base No.
C
XXXX - X X X X X
Assembly Base Numbers Valve Size (in.) Rating (psi) Series E Rating (psi) Ser. EH Rating (psi) Ser. EC
2 x 11/2 Thrd. Grvd.
31403150-
Thrd.
6514-
Grvd.
3413-
3x2 3x3 750 CWP 31413081315130841000 CWP — — 600 CWP 3414—
4x3 31423152— —
9 10 3
13 4 7
12
B
Dimensional Data (in.)
39
11
B
8 6
2 7
1 5
Valve Size (in.) Dimension Weight lbs.* A Thrd. Grvd. B Ser. EC Thrd. C Grvd. E F G H J K L M N U
2 RP 2 x 1 1/2 12.5 1 1/2 5 1/4 5 1/8 5 1/16 2 3/8 2 11/16 3 21/32 5 15/32
3 RP 3x2 22 2 7 5/16 7 5/16 7 3/8 3 5/16 3 5/16 4 3/32 5 29/32 8 1/2 11 / 32 .873 /.871 .560 /.556 1 1 3/4 1 7/16
2 5/8
3 1/16
3 FP/ 4 RP 4x3 52/46 3 8 3/4 8 3/4 – 4 3/8 4 3/8 5 11/32 6 25/32 5 1 3/8 1.248 /1.246 .622 /.618 1 1/8 2 3/16 1 13/16 4
* Handle weight included.
Parts List and Materials Index Description 1 Body 2 Adapter 3 Stem 4 Ball 5 Body Seal 6 Stem Bearing 7 Seat 8 Stop
Material E&EH-ASTM 395 Ductile Iron, EC-A351 Gr. CF8M E&EH-ASTM 395 Ductile Iron, EC-A351 Gr. CF8M Carbon Steel/Zinc Plated or 316 Stainless Steel 1215 CS w/Chrome over Nickel Plating or 316 SS HNBR, Viton®, PC Buna N, EPDM, Aflas® Nylon Nylon, Reinforced Teflon® or HT4 (PEEK™) Steel
12 KF Threaded Ball Valves
Index Description 9 Stem Seal 10 Thrust Bearing 11 Handle 12 Stop Plate 13 Retainer 20 Ribbon Seal Pin 39 Weather Seal
Material HNBR, Viton®, PC Buna N, EPDM, Aflas® Teflon® (HT4 when using Hi-Temp Seats & Seals) A47 Malleable Iron Steel, Plated Spring Steel Copper Pin/Steel Chain Buna N Only
KF Series W Ball Valves Size Body/Adapter Packing Nut Trim (Ball & Stem) Actuation
0 • 1/4" 1 • 3/8" 2 • 1/2" 3 • 3/4"
4 • 1" 5 • 1 1/4" 6 • 1 1/2" 7 • 2"
G
8 • 2 1/2" 9 • 3" 10 • 4"
C
1 • Carbon Steel w/ Zinc plating 2 • Stainless Steel (S8000) B • Carbon Steel w/ Black Oxide
L P
M Flats J
F
1 • Stainless Steel 1 • Handle w/ Locking Device 3 • Oval Handle
A
ØN
B
Assembly Base No.
0500X - X X X
All Stainless Steel Series W valves conform to NACE Specification MR0175.
Sizes 21/2" thru 4"
Assembly Base Numbers 3/8 1/2 3/ 4 Valve Size (in.) 1/4 Rating (psi) 2000 CWP Series W 50005001500250031 1 2 2 /2 3 Valve Size (in.) 1 /2 Rating (psi) 2000 CWP 1500 Series W 5006500750075009-
Dimensional Data (in.) 1
1 1/4
50044
5005-
5010
Valve Sz.(in.) 1/4 Dim.
3/8
1/2
3/4
Wt.lbs.* .55 .55 .66 A .43 .49 .59 B 2.32 2.44 C .37 .47 F 2.36 2.44 G 3.94 J .31 L .55 .67 M .20 N 1.42 P
1.13 .79 2.87 .53 2.68 4.76 .39 .79 .24 M5
1
1 1/4 1 1/2
2
2 1/2
3
4
2.00 3.00 4.25 6.88 1.00 1.26 1.50 1.97 2.56 3.15 3.93 3.35 3.82 4.53 5.28 6.61 7.52 9.09 .71 1.14 1.22 3.15 3.39 3.74 5.20 5.63 6.69 6.02 7.09 10.43 11.02 .47 .55 .75 .98 .98 1.57 1.79 .31 .47 .63 1.65 1.97 2.76 4.02 M6 M8 M10
* Handle weight included.
Parts List and Materials Index 1 2 3 4 5 7
Description Body Adapter Stem Ball Body Seal Seat
Material ASTM A216 Gr. WCB or A351 CF8M C12L14 Carbon Steel or 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel Teflon® Uniseal™
Index Description 8 Thrust Washer 9 Packing 11 Handle 13 Handle Nut 20 Packing Nut
Material PTFE Glass Reinforced Teflon® 304 Stainless Steel 304 Stainless Steel 316 Stainless Steel
KF Threaded Ball Valves 13