FULLY WELDED

BALL VALVES

2

PERFORMANCE FROM START TO FINISH Ensuring the safety of the entire pipeline system requires the valves for oil and gas applications to be able to meet the most challenging demands. The design is optimised for each specific field of application and complies with the latest standards and regulations. BÖHMER-Ball Valves are a guarantee for long lasting reliability. Renowned oil and gas companies trust in our quality.

3

EXPERIENCE, EXPERTISE, PERFORMANCE. WE ARE BÖHMER! We have been a reliable ball valve manufacturer since 1956. More than 300 highly qualified employees and modern machinery are the components of our success. The structure of our plant and equipment, as well as our production, which is based on the most modern economic and ecological requirements, guarantee our customers maximum performance, quality and cost-effectiveness. Decades of research and development enable us to manufacture a wide variety of ball valves for diverse applications. Thanks to our modular design system, we can always react flexibly to market needs. Needless to say, we offer special designs for individual customer requirements.

Branch factory in Hattingen

Main factory in Sprockhövel

4

Branch factory in Kunshan, China

Branch factory in Karaganda, Kazakhstan

Today we are proud to have facilities located on 23,000 m² of production and administration floor-space in our main factory and 13,500 m² in our branch factory in Hattingen. Furthermore we are present outside of Europe with two production facilities. In China we produce split body ball valves for the local market. Our plant in Kazakhstan is delivering district heating ball valves to regional customers. Our large warehousing capacity enables us to meet even short-term deadlines. Ontime deliveries are standard for us. Our regular customers are demanding and therefore appreciate our first-class service. They have relied on the quality and reliability of BÖHMER ball valves for decades. We are proud to be recognized as one of the leading valve manufacturers.

5

THE BÖHMER PRODUCT LINE Our ball valves set standards because our products are designed for the most demanding conditions. The various applications for which our ball valves were designed require maximum durability and performance. Generally our ball valves can be used wherever gases, liquids and solids are transported. It goes without saying that our ball valves fulfill all requirements for certification and procedure approvals. We can transport all media without difficulty up to the nominal size DN1400 / 56”, even with pressures of up to 500 bar. The standards that our ball valves now fulfill are the highest on the market. But we go a step further. Our team of highly qualified engineers and designers takes special care to further develop our ball valves with maximum quality of design and material as well as cost-effectiveness.

6

OIL; GAS AND PRODUCT

PI PE LI N E S COMPRESSOR; MEASURING

AND REDUCTION STATIONS

GAS STORAGE

PLANTS AND VESSELS FOR THE OIL; GAS AND PETROCHEMICAL INDUSTRY

LIQUID GAS ON- AND OFFSHORE PLATFORMS

SHIPBUILDING

POWER STATIONS DISTRICT HEATING / STEAM

SCRAPER LAUNCH AND

RECEIVING STATIONS

SPECIAL APPLICATIONS / TAILOR MADE

Certifications DIN EN ISO 9001

API 6D/API 6DSS

DIN-DVGW

EN 13774

EAC

EN 14141

TA-Luft

ATEX 94/9/EG

BS 5351

Fire Safe

PED 97/23/EC

BAM



(structural component approvals)

Type approvals

Safety Shutoff Units (SAE)

(VdTÜV)

acc. to EN 14382

acc. to BS6755/API6FA

and others

7

PRECISELY DESIGNED AND PROVEN IN THE FIELD Böhmer fully welded ball valves fullfil the requirements of the most common national and international standards.

8 9

BASIC DESIGN FEATURES Seat Seal System The Böhmer ball valves provide spring supported seats as a standard. The seats are pressed against the ball surface by the spring elements and ensure a tight shut-off at low line pressure. In addition the sealing effect is assisted by the pressure in line. So the total sealing force is the sum of the spring force and the force resulting from the pressure which increases proportionally with the line pressure. Depending on applications and customer requirements the below mentioned sealing systems can be delivered: • soft seated • primary metal seated / secondary soft seated • metal to metal seated

Stem Sealing The sealing of the stem to the atmosphere is achieved by three independent sealing systems. The stem sealing design ensures the anti-blow-out function, too. Therefore, the three stem sealings are easily replaceable under full line pressure in open or closed position.

6 4

Trunnion Mounted Ball The standard design of Böhmer ball valves provides a trunnion mounted ball for the nominal sizes 3 inch and higher. The maintenance-free bearings for stem and trunnion are self-lubricating, thus ensuring a lower torque especially for high pressure ratings.

Fire Protection The design ensures the fire safe requirements in accordance with the international standards as API 6FA, API 607, BS 6755 P 2 and ISO 10497.

Anti-Static Device The ball valve design includes an electric conductive connection between the internal parts of the ball valve and the body, providing the anti-static function.

Emergency Sealing As an option, Böhmer ball valves can be delivered with an additional emergency sealant injection for the seat-rings and stem sealing.

3

7 6

Double Block and Bleed The cavity can be relieved via vent or drain connections at the cavity. The upstream and downstream seat rings ensure the tight shut off to the cavity in closed position (optional in open position as well). This enables the verification of the tightness of the ball valve under full working pressure.

5 2

Single-Piston-Effect (Self-relieving Seat Design) This seat system is designed to automatically vent any excessive build-up pressure in the body cavity. The floating seat design allows for relieving the overpressure into the pipeline.

1

➀ Body ➁ Ball ➂ Stem ➃ Trunnion ➄ Seat-rings ➅ Self lubricating bearings ➆ Anti blow-out device

of the stem

➇ Top mounting flange for

gearboxes or actuators

➈ Emergency sealant injection

as an option

Double-Piston-Effect (Bi-directional Seating System) With this design the seat rings tighten independently of the actual pressure relations. A redundant sealing system is created. Self relieving of the cavity does not happen in closed position (optional in open position as well).

9

Ball Valve with Flange or Weld Ends

DN 25 - 400, ANSI Class 150 | PN 16* Standard Materials:

Nom. size For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range. The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards. Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers´ demands are deliverable on request.

Diameter

DN

Body:

TSTE 355N/P355 NL1; ASTM A350 LF2;



ASTM A106/P235 GH-TC1; P250 GH

Ball:

ASTM A350 LF2; ENP or hard chrome;



stainless steel on request

Seat Rings:

ASTM A350 LF2; ENP or hard chrome;



stainless steel on request

O-Rings:

FPM; EPDM; NBR; HNBR

Seat Insert:

FPM; PTFE; PTFE-filled; HNBR

Face to face dimensions

Di

L(RF)

L(RTJ)

L(PN*)

L(WE)

H1

H2

Flange

Weld Ends

mm

inch

mm

mm

mm

mm

mm

mm

mm

kg

kg

25 50 80 100 150 200 250 300 350 400

1 2 3 4 6 8 10 12 14 16

25 51 78 102 152 203 254 305 336 387

127 178 203 229 394 457 533 600 686 762

191 216 241 406 470 546 622 699 775

150 180 190 350 400 650 750 850 950

216 241 283 305 400 460 600 700 800 900

35 63 100 113 166 201 283 325 353 435

27 45 70 86 157 192 249 313 340 406

4.5 12 28 45 85 130 295 505 680 850

2 6 20 32 59 90 265 450 610 750

* DIN face-to-face dimensions are deliverable as well.

10

Weight

The information given is subject to change and potential clerical errors.

Ball Valve with Flange or Weld Ends

DN 450 - 1400, ANSI Class 150 | PN 16* Standard Materials:

For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range. The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards. Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers´ demands are deliverable on request.

Body:

TSTE 355N/P355 NL1; ASTM A350 LF2;



P250 GH

Ball:

ASTM A350 LF2; ENP or hard chrome;



stainless steel on request

Seat Rings:

ASTM  A350 LF2; ENP or hard chrome;



stainless steel on request

O-Rings:

FPM; EPDM; NBR; HNBR

Seat Insert:

FPM; PTFE; PTFE-filled; HNBR

Nom. size

Diameter

DN

Di

L(RF)

Face to face dimensions L(RTJ)

L(PN*)

Weight

L(WE)

H1

H2

Flange

Weld Ends

mm

inch

mm

mm

mm

mm

mm

mm

mm

kg

kg

450 500 550 600 700 750 800 900 1000 1050 1200 1400

18 20 22 24 28 30 32 36 40 42 48 56

438 489 540 591 686 736 781 876 978 1020 1166 1360

864 914 1016 1067 1245 1295 1372 1524 1948 2015 2145 2360

876 927 1028,7 1080 -

1050 1150 1350 1550 -

1000 1090 1130 1150 1295 1346 1397 1499 2010 2085 2210 2445

470 512 649 688 742 785 852 912 1110 1163 1322 1530

450 488 551 594 661 711 774 830 978 1026 1192 1348

1180 1660 2100 2500 3100 3680 4830 6650 8900 9900 16000 20500

1050 1400 1800 2300 2800 3250 4400 6050 8250 9150 14900 19300

* DIN face-to-face dimensions are deliverable as well.

The information given is subject to change and potential clerical errors.

11

Ball Valve with Flange or Weld Ends

DN 25 - 400, ANSI Class 300 | PN 25/40* Standard Materials:

For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range. The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards. Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers´ demands are deliverable on request.

Body:

TSTE 355N/P355 NL1; ASTM A350 LF2;



ASTM A106/P235 GH-TC1; P250 GH

Ball:

ASTM A350 LF2; ENP or hard chrome;



stainless steel on request

Seat Rings:

ASTM A350 LF2; ENP or hard chrome;



stainless steel on request

O-Rings:

FPM; EPDM; NBR; HNBR

Seat Insert:

FPM; PTFE; PTFE-filled; HNBR

Nom. size

Diameter

DN

Di

L(RF)

Face to face dimensions L(RTJ)

L(PN*)

L(WE)

H1

H2

Weld Ends

mm

inch

mm

mm

mm

mm

mm

mm

mm

kg

kg

25 50 80 100 150 200 250 300 350 400

1 2 3 4 6 8 10 12 14 16

25 51 78 102 152 203 254 305 336 387

140 216 283 305 403 502 568 648 762 838

232 298 321 419 518 584 664 778 854

150 180 190 350 400 650 750 850 950

216 241 283 305 400 460 600 700 800 900

35 63 100 113 198 233 283 325 353 435

27 45 95 108 165 201 249 313 340 406

4,5 12 28 45 89 135 310 520 710 890

2 6 20 32 59 90 265 450 610 750

* DIN face-to-face dimensions are deliverable as well.

12

Weight Flange

The information given is subject to change and potential clerical errors.

Ball Valve with Flange or Weld Ends

DN 450 - 1400, ANSI Class 300 | PN 25/40* Standard Materials:

For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range. The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards. Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers´ demands are deliverable on request.

Body:

TSTE 355N/P355 NL1; ASTM A350 LF2

Ball:

ASTM A350 LF2; ASTM A105; ASTM A182;



ASTM  A694; ENP or hard chrome;



stainless steel on request

Seat Rings:

ASTM A350 LF2; ASTM  A105;



ENP or hard chrome; stainless steel on request

O-Rings:

FPM; EPDM; NBR; HNBR

Seat Insert:

FPM; PTFE; PTFE-filled; HNBR

Nom. size

Diameter

DN

Di

L(RF)

Face to face dimensions L(RTJ)

L(PN*)

Weight

L(WE)

H1

H2

Flange

Weld Ends

mm

inch

mm

mm

mm

mm

mm

mm

mm

kg

kg

450 500 550 600 700 750 800 900 1000 1050 1200 1400

18 20 22 24 28 30 32 36 40 42 48 56

438 489 540 591 686 736 781 876 978 1020 1166 1360

914 991 1092 1143 1346 1397 1524 1727 2048 2112 2257 2470

930 1010 1114 1165 1372 1422 1553 1756 -

1050 1150 1350 1550 -

1000 1090 1130 1150 1295 1346 1397 1499 2010 2085 2210 2445

470 512 649 688 742 785 852 912 1110 1163 1322 1530

450 488 551 594 661 711 774 830 978 1026 1192 1348

1210 1710 2100 2580 3190 3800 4950 6900 9200 10700 16600 21300

1050 1450 1850 2300 2840 3350 4500 6200 8400 9800 15500 19700

* DIN face-to-face dimensions are deliverable as well.

The information given is subject to change and potential clerical errors.

13

Ball Valve with Flange or Weld Ends

DN 25 - 400, ANSI Class 600 | PN 100* Standard Materials:

Nom. size For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range. The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards. Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers´ demands are deliverable on request.

DN

Diameter

Body:

TSTE 355N/P355 NL1; ASTM A350 LF2

Ball:

ASTM A350 LF2; ASTM A694; 



ENP or hard chrome; stainless steel on request

Seat Rings:

ASTM A350 LF2; ENP or hard chrome;



stainless steel on request

O-Rings:

FPM; EPDM; NBR; HNBR

Seat Insert:

FPM; PTFE; PTFE-filled; HNBR

Face to face dimensions

Di

L(RF)

L(RTJ)

L(WE)

H1

H2

Flange

Weld Ends

mm

inch

mm

mm

mm

mm

mm

mm

kg

kg

25 50 80 100 150 200 250 300 350 400

1 2 3 4 6 8 10 12 14 16

25 51 78 102 152 203 254 305 336 387

216 292 356 432 559 660 787 838 889 991

216 295 359 435 562 663 791 841 892 994

216 292 356 432 559 660 787 838 889 991

55 78 160 192 228 295 343 403 451 492,5

29 61 116 135 178 224 275 320 363 400

6 17 41 72 157 300 455 690 980 1310

3 10 32 56 115 225 365 590 830 1080

* DIN face-to-face dimensions are deliverable as well.

14

Weight

The information given is subject to change and potential clerical errors.

Ball Valve with Flange or Weld Ends

DN 450 - 1400, ANSI Class 600 | PN 100* Standard Materials: Body:

TSTE 355N/P355 NL1; ASTMA 350 LF2;



ASTM A694

Ball:

ASTM A350 LF2; ASTM A694;

 ENP or hard chrome; stainless steel on request

For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range. The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards. Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers´ demands are deliverable on request.

Nom. size

Diameter

DN

Di

Seat Rings:

ASTM A350 LF2; ENP or hard chrome;



stainless steel on request

O-Rings:

FPM; EPDM; NBR; HNBR

Seat Insert:

FPM; HNBR

Face to face dimensions L(RF)

L(RTJ)

Weight

L(WE)

H1

H2

Flange

Weld Ends

mm

inch

mm

mm

mm

mm

mm

mm

kg

kg

450 500 550 600 700 750 800 900 1000 1050 1200 1400

18 20 22 24 28 30 32 36 40 42 48 56

438 489 540 591 686 736 781 876 978 1020 1166 1360

1092 1194 1295 1397 1549 1651 1778 2083 2165 2240 2385 2710

1095 1200 1305 1407 1562 1664 1794 2099 2194 2269 2414 2739

1030 1090 1130 1245 1295 1346 1397 1499 2010 2085 2210 2445

548 603,5 649 688 742 785 852 912 1110 1163 1322 1530

458 504 551 594 661 711 774 830 978 1026 1192 1348

1770 2210 2720 3400 4580 5750 7000 8800 10600 11700 18900 26800

1490 1830 2250 2950 3850 4890 6000 7500 9300 10400 16800 23800

* DIN face-to-face dimensions are deliverable as well.

The information given is subject to change and potential clerical errors.

15

Ball Valve with Flange or Weld Ends

DN 25 - 400, ANSI Class 900 | PN 160* Standard Materials: Body:

TSTE 355N/P355 NL1; ASTM A350 LF2;



ASTM A694

Ball:

ASTM A350 LF2; ASTM A182; ASTM A694;

 ENP or hard chrome; stainless steel on request

For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range. The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards. Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers´ demands are deliverable on request.

Seat Rings:

ASTM A350 LF2; ASTM  A694; ASTM  A182;



ENP or hard chrome; stainless steel on request

O-Rings:

FPM; EPDM; NBR; HNBR

Seat Insert:

FPM; PTFE; PTFE-filled; HNBR

Nom. size

Diameter

DN

Di

Face to face dimensions L(RF)

L(RTJ)

L(WE)

H1

H2

Flange

Weld Ends

mm

inch

mm

mm

mm

mm

mm

mm

kg

kg

25 50 80 100 150 200 250 300 350 400

1 2 3 4 6 8 10 12 14 16

25 51 78 102 152 203 254 305 324 375

216 368 381 457 610 737 838 965 1029 1130

216 372 384 460 613 740 841 968 1038 1140

216 292 356 432 559 660 787 838 889 991

55 78 160 192 228 295 343 413 461 505

29 61 116 135 178 224 275 330 373 412,5

7 23 49 83 185 395 620 920 1280 1620

3 10 32 56 115 230 405 670 920 1210

* DIN face-to-face dimensions are deliverable as well.

16

Weight

The information given is subject to change and potential clerical errors.

Ball Valve with Flange or Weld Ends

DN 450 - 1200, ANSI Class 900 | PN 160* Standard Materials: Body:

TSTE 355N/P355 NL1; ASTM A350 LF2;



ASTM A694

Ball:

ASTM A350 LF2; ASTM A182; ASTM A694;

 ENP or hard chrome; stainless steel on request

For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range. The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards. Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers´ demands are deliverable on request.

Seat Rings:

ASTM A350 LF2; ASTM  A694; ASTM  A182;



ENP or hard chrome; stainless steel on request

O-Rings:

FPM; EPDM; NBR; HNBR

Seat Insert:

FPM; HNBR

Nom. size

Diameter

DN

Di

Face to face dimensions L(RF)

L(RTJ)

Weight

L(WE)

H1

H2

Flange

Weld Ends

mm

inch

mm

mm

mm

mm

mm

mm

kg

kg

450 500 550 600 700 750 800 900 1000 1050 1200

18 20 22 24 28 30 32 36 40 42 48

425 473 524 572 667 714 762 857 956 1006 1149

1219 1321 1422 1549 1549 1651 1778 2083 2225 2285 2460

1232 1334 1435 1568 1562 1664 1794 2099 2254 2314 2489

1030 1190 1130 1295 1359 1422 1486 1625 2010 2085 2210

563 621,5 671 708 772 820 887 945 1120 1187 1380

471 519 566 615 685 740 805 865 995 1055 1215

2100 2680 3420 4290 6100 7800 9750 13900 17800 19600 28500

1650 2040 2750 3320 4950 6500 7800 10400 14700 16300 24500

* DIN face-to-face dimensions are deliverable as well.

The information given is subject to change and potential clerical errors.

17

Ball Valve with Flange or Weld Ends

DN 25 - 900, ANSI Class 1500 / PN 250 Standard Materials: Body:

TSTE 355N/P355 NL1; ASTM A350 LF2;



ASTM A694

Ball:

ASTM A350 LF2; ASTM A182; ASTM A694;

 ENP or hard chrome; stainless steel on request

Nom. size DN

For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range. The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards. Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers´ demands are deliverable on request.

18

Diameter

Seat Rings:

ASTM A350 LF2; ASTM  A694; ASTM  A182;



ENP or hard chrome; stainless steel on request

O-Rings:

FPM; EPDM; NBR; HNBR

Seat Insert:

FPM; PTFE; PTFE-filled; HNBR

Face to face dimensions

Weight

Di

L(RF)

L(RTJ)

L(WE)

H1

H2

Flange

Weld Ends

mm

inch

mm

mm

mm

mm

mm

mm

kg

kg

25 50 80 100 150 200 250 300 350 400 450 500 600 700 750 800 900

1 2 3 4 6 8 10 12 14 16 18 20 24 28 30 32 36

25 51 78 102 146 194 241 289 318 362 406 454 546 641 686 730 819

254 368 470 546 705 832 991 1130 1257 1384 1537 1664 1950 -

257 372 473 549 711 841 1000 1146 1276 1407 1559 1686 1972 1990 -

254 368 410 470 580 710 820 940 1075 1200 1254 1295 1390 1497 1575 1610 1770

60 85 175 212 253 330 388 463 527 575 533 743 849 1001 1078 1120 1235

35 70 131 155 203 254 310 382 433 482,5 474 612 753 859 910 965 1080

21 35 73 126 255 625 845 1430 1900 2400 3100 3900 5600 7900 10000 12800 17400

13 18 48 88 165 410 650 1120 1430 1750 2100 2850 4500 6600 8500 11000 15000

The information given is subject to change and potential clerical errors.

Ball Valve with Flange or Weld Ends

DN 25 - 300, ANSI Class 2500 / PN 420 Standard Materials: Body:

TSTE 355N/P355 NL1; ASTM A350 LF2;



ASTM A694

Ball:

ASTM A350 LF2; ASTM A182; ASTM A694;

 ENP or hard chrome; stainless steel on request

For deviating operating conditions please send us a written request stating the fluids, as well as the pressure and temperature range. The materials which are mentioned in the list are the Böhmer standard materials. They comply with the most common national and international standards. Other materials, which may be necessary due to special applications / conditions (such as corrosion / abrasion as well as temperature etc.) or customers´ demands are deliverable on request.

Seat Rings:

ASTM A350 LF2; ASTM  A694; ASTM  A182;



ENP or hard chrome; stainless steel on request

O-Rings:

FPM; EPDM; NBR; HNBR

Seat Insert:

FPM; HNBR

Nom. size

Diameter

DN

Di

Face to face dimensions L(RF)

L(RTJ)

L(WE)

H1

H2

Flange

Weld Ends

mm

mm

kg

kg

105 155 180 234 290 345 415

37 82 175 340 770 1250 2000 2700

20 36 80 185 380 720 1050 1400

mm

inch

mm

mm

mm

mm

25 50 80 100 150 200 250 300

1 2 3 4 6 8 10 12

25 42 62 87 131 179 223 265

254 451 578 673 914 1022 1270 1422

257 454 584 683 927 1038 1292 1445

254 368 410 490 610 870 995 1145

Weight

145 195 232 285 363 415 498

The information given is subject to change and potential clerical errors.

19

ACTUATORS FOR BÖHMER BALL VALVES

Lever

Gear Unit

Electric actuator

Hydraulic actuator

Pneumatic actuator

Ball valves with gear units An economical solution for actuating large ball valves.

Pneumatic, hydraulic and electric ball valve actuators BÖHMER ball valves can be combined with actuators made by all established actuator manufacturers. We look forward to receiving your technical inquiries.

The actuating torque is defined by the range of application, the operating conditions and the design of the ball valve. Our technical engineers will be at your service in order to select the best suitable actuator for your ball valve.

20

OPTIONAL EQUIPMENT Emergency sealing injection Stem extension Extended lines for drain, vent and emergency sealing injection Bypass directly at the valve Locking device Underground installation Other design features on request

Our product range includes more than 100.000 different kinds of ball valves. 21

BÖHMER BALL VALVES IN OPERATION We keep in step with time! Thanks to our comprehensive product line, we are already able to fulfill almost every customer demand. But we do not rest on our laurels! In order to be able to satisfy all customers’ wishes in the future, our highly qualified engineers and designers take meticulous care to develop the next generations of ball valves. As a result, we develop innovative solutions which are successful in fields such as district heating, the gas industry, pipeline construction, hydraulics, pneumatics, plant engineering and construction, petrochemicals and subsea applications.

District heating

Oil, gas, petrochemicals

22

Shipbuilding

Power plants

As one of the world’s leading manufacturers of ball valves, we are always conscious of our responsibilities to our customers. Now and in the future, the name BÖHMER will continue to be a distinguished synonym for our comprehensive promise to perform.

BÖHMER

OUR EXPERIENCE – YOUR SAFETY

23

Gedulderweg 95 45549 Sprockhövel / Germany Phone: +49 2324 7001-0 Fax: +49 2324 7001-79 E-Mail: [email protected]

www.boehmer.de

Version: VV2.2

24