Brass Ball Valves 60 Series 1⁄ 8"
– 4" BSP
● Ideally suited for most industrial applications ● Easy installation, simple operation and maintenance free ● Full bore passage giving minimum flow resistance
Technical Data
Ordering Information
Medium: Compressed air, water, inert gases and any other fluid compatible with the valve materials Port Sizes: G1⁄ 8, G1⁄ 4, G3⁄ 8, G1⁄ 2, G3⁄ 4, G1, G11⁄ 4, G11⁄ 2, G2, G21⁄ 2, G3, G4. Operating Pressure: See individual details Operating Temperature: Refer to table over the page Materials Nickel plated brass body to UNI 5705-65, virgin PTFE seats, virgin PTFE, Viton or Nitrile seals, chromium plated brass ball, zinc plated steel handle with PVC grip (plastic handle on mini ball range).
To order quote the appropriate product numbers from the tables on the following pages.
Standard
Exhausting
3–way
10/97
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
N/AL 5.10.040.01
60 Series Ball Valves General Information Symbol
Series
Type
Application
Materials Body
Seats & Seals
Max Pressure (bar)
Temp Range
Thread Standards
Brass
PTFE & Nitrile “O” ring
10
–10 to +90ºC
ISO 228/1
2 12
10
6011
Mini
General, light duty
10
6018
Lockable Exhausting General, with exhaust Brass
PTFE
13,6
4-60°C
ISO 228/1
10
6021
Standard
General purpose
Brass
PTFE & Viton “O” ring
45 to 10
–20 to +150ºC
ISO 228/1
10
6021
Three Way
General diverting
Brass
PTFE & Nitrile “O” ring
25 to 16
–15 to +150ºC
ISO 228/1
10
6021
Exhausting
General with exhaust
Brass
PTFE
40 to 64
–20 to +100ºC
ISO 228/1
6041
Standard
Commercial gas and general
Brass
PTFE
55 to 20
–20 to +150ºC
1 2 12 3
1 2
12 1 2 12 3
1 2
12 3
1 2 10
12
ISO 228/1
1
6011 Series: 6018 Series: 6021 Series:
Light duty in-line brass ball valves suitable for a wide variety of low pressure industrial uses. Medium duty in-line brass exhausting ball valves. Venting action & lockout design adds safety feature to valve. Medium duty in-line brass ball valves for most applications. Available as a standard valve, a three way diverting valve or with a downstream exhaust option. Special, high quality in-line ball valves with approvals from British Gas, DIN-DVGW, Danish Gas, Svenska Gasfoereningen. Suitable for gas and water applications as well as more general industrial uses.
6041 Series:
6011 Series Miniball A
D
Reduced bore, female/female 601112118 601112128 601112138 601112148
E
B
Model
Thread size G1⁄ 8 G1⁄ 4 G3⁄ 8 G1⁄ 2
Max. Press. 10 10 10 10
A
B
C
D
E
F
19 19 19 22
20 20 21 25
37 37 41 48
22 22 24 30
5,5 5,5 8,0 10,0
19 19 21 25
F
C
A
D
D
Reduced bore, male/female Model 601112218 601112228 601112238 601112248
Thread size G1⁄ 8 G1⁄ 4 G3⁄ 8 G1⁄ 2
Max. Press. 10 10 10 10
A
B
C
D
E
F
19 19 19 22
20 20 21 25
37 37 41 48
22 22 24 30
5,5 5,5 8,0 10,0
19 19 21 25
A
B
C
D
E
F
19 19 19 22
20 20 21 25
48 48 53 62
22 22 24 30
5,5 5,5 8,0 10,0
19 19 21 25
E
B F
C
A
Reduced bore, male/male D
D
Model 601112318 601112328 601112338 601112348
N/AL 5.10.040.02
Max. Press. 10 10 10 10
E
B C
Thread size G1⁄ 8 G1⁄ 4 G3⁄ 8 G1⁄ 2
F
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
10/97
60 Series Ball Valves 6021 Standard Ball Valve A
Full bore, female/female Model
F
E
B
602112128 602112138 602112148 602112168 602112188 6021121A8 6021121B8 6021121C8 6021121D8 6021121E8 6021121F8
C A
Thread size G1⁄ 4 G3⁄ 8 G1⁄ 2 G3⁄ 4 G1 G11⁄ 4 G11⁄ 2 G2 G21⁄ 2 G3 G4
Max. Press. 45 40 35 30 25 20 20 16 16 10 10
A
B
C
E
F
85 85 85 105 105 130 130 165 248 248 248
36 36 40 47 51 63 69 83 99 110 129
48 49 60 69 83 96 106 129 159 182 219
8 10 15 20 25 32 40 50 65 80 100
23 24 30 38 46 58 70 86 111 135 167
A
B
C
E
F
85 85 85 105 105 130
36 36 40 47 51 63
50 54 65 75 86 99
8 10 15 20 25 32
23 24 30 38 46 58
D L Thro Bore 8 52 10 54 15 69 20 77 25 89 32 103
M A/F 22 22 27 33 40 50
B
Full bore, male/female 602112228 602112238 602112248 602112268 602112288 6021122A8
F
E
Model
C
Thread size G1⁄ 4 G3⁄ 8 G1⁄ 2 G3⁄ 4 G1 G11⁄ 4
Max. Press. 45 40 35 30 25 20
For T handle valves, substitute 2 for 1 at 4th digit.
Pressure/Temperature diagram Bar 50
1/ 4 3/ 8 1/ 2 3/ 4
" " " " 1" 1/ 1 4" - 11/2" 2" 3" - 4"
40 30 20 10
–20°
0°
+25°
+50°
+75°
+100°
+125°
+150° °C
6021 Exhausting Ball Valve A
Full bore, female/female
B
Model
C
D
M (Across Flats)
602113128EX 602113138EX 602113148EX 602113168EX 602113188EX 6021131A8EX
Thread size G1⁄ 4 G3⁄ 8 G1⁄ 2 G3⁄ 4 G1 G11⁄ 4
Max. Press. 64 64 50 50 50 40
A
B
C
100 100 100 120 120 150
61 61 64 76 80 98
29 29 36 45 54 65
For T handle valves, substitute 2 for 1 at 4th digit.
Exhaust L
10/97
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
N/AL 5.10.040.03
60 Series Ball Valves
6021 3–Way Ball Valve A
Full bore, female/female/female
F
B
Model
J
E
E
602114428 602114438 602114448 602114468 6021144A8
Thread size G1⁄ 4 G3⁄ 8 G1⁄ 2 G3⁄ 4 G11⁄ 4
Max. Press. 25 25 25 16 10
A
B
C
E
F
J
98 98 98 118 118
42 42 45 57 66
52 52 64 74 100
10 10 15 20 32
22 22 27 32 50
26,0 26,0 33,5 39,5 54,5
E C
Test specification differs from standard. Please consult our Technical Service for futher details.
6041 Gas Approved Ball Valve A
Full bore, female/female Model
F
E
B
604112128 604112138 604112148 604112168 604112188 6041121A8 6041121B8 6041121C8
C
Thread size G1⁄ 4 G3⁄ 8 G1⁄ 2 G3⁄ 4 G1 G11⁄ 4 G11⁄ 2 G2
Max. Press. 55 50 45 40 35 25 25 20
A
B
C
E
F
85 85 85 105 105 130 130 165
41 41 44 53 57 70 76 92
48 49 61 70 84 98 108 130
8 10 15 20 25 32 40 50
23 24 32 40 48 60 72 88
For T handle valves, substitute 2 for 1 at 4th digit.
Pressure/Temperature diagram Bar 60
1/ 4 3/ 8 1/ 2 3/ 4
" " " " 1"
50 40 30
11/4" - 11/2" 2"
20 10
–20°
0°
N/AL 5.10.040.04
+25°
+50°
+75°
+100°
+125°
+150° °C
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
10/97
60 Series Ball Valves 6018 Lockable Exhausting Ball Valve A
Full bore, female/female
7,5
Model
C
B
G (Across Flats)
F M5 x 0,8 Exhaust Port
Thread size
601812128 1⁄ 4 601812138 3⁄ 8 601812148 1⁄ 2 601812168 3⁄ 4 601812188 1
Max. Press. 13,6 bar 13,6 bar 13,6 bar 13,6 bar 13,6 bar
A
B
93 93 93 114 114
45 45 50 57 61
C Thro Bore 8 9 14 19 24
F 44 44 58 64 81
G A/F 20 20 24 30 40
Lever lockable only in closed position. Standard handle accepts Ø 7mm shackle. Test specification differs from standard. Please consult our Technical Service for futher details.
Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under ‘Technical Data’. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult Norgren. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products where applicable.
10/97
Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
N/AL 5.10.040.05