Kegunaan : UNTUK PEMBUATAN JAM MENARA JAM TOWER Mesin Jam Tower Clock Outdoor Kuat dan Tahan Air

Clock Solutions Mesin Jam Tower - Outdoor Mesin Jam Menara untuk Media Luar Ruang Kegunaan : UNTUK PEMBUATAN JAM MENARA – JAM TOWER Mesin Jam Tower...
Author: Isabel Thomas
0 downloads 1 Views 203KB Size
Clock Solutions

Mesin Jam Tower - Outdoor Mesin Jam Menara untuk Media Luar Ruang Kegunaan

:

UNTUK PEMBUATAN JAM MENARA – JAM TOWER Mesin Jam Tower Clock Outdoor – Kuat dan Tahan Air

GFClock Yasa Persada Showroom

:

Parkir Masjid Jami Al-Fajri Jl. Masjid Alfajri No.17 Pejaten Barat - Pasar Minggu - Jakarta Selatan 12510 Telp. +62-21-41518840 ; 70978302

Office

:

Graha Mobisel 1st Floor Jl. Mampang Prapatan Raya No.139 - Jakarta Selatan 12740 Telp. +62-21-7975555 Ext.6049

Workshop

:

Jl. Masjid Alfajri No.11/44 Pejaten Barat – Pasar Minggu Jakarta Selatan 12510 Telp. +62-828-7790027

Phone

:

+62-21-98529616 +62-21-79170265

Fax

:

+62-21-79170265

Website

: http://www.gfclock.com

Clock Parts IV – GFClock Yasa Persada, Pt. Website: http://gfclock.com | http://washingtonclocks.com Direct: +62 – 818 802045 | Email: [email protected]

Page: 1 of 11

Clock Solutions

Contents MESIN JAM TOWER - OUTDOOR ........................................................ 1 GFCLOCK YASA PERSADA.................................................................. 1 CONTENTS ........................................................................................ 2 MESIN JAM TOWER CLOCKS – OUTDOOR CLOCK MOVEMENT ............ 3 GFA SERIES FOR 1 – 6 METER DIAMETER .....................................................3 GFC SERIES FOR 1 – 6 METER DIAMETER .....................................................7 MOVEMENT MODEL EXPLANATION.................................................. 11

Clock Parts IV – GFClock Yasa Persada, Pt. Website: http://gfclock.com | http://washingtonclocks.com Direct: +62 – 818 802045 | Email: [email protected]

Page: 2 of 11

Clock Solutions

Mesin Jam Tower Clocks – Outdoor Clock Movement GFA Series for 1 – 6 Meter Diameter Two hands: Hour and Minute

Available for 1 – 6 Meter diameter of Dial

Micro-processor based self-setting movement Ideal for open-air tower clock system All metal fabric with stepping motor Remote control enabled Compact design with multiple functions FEATURES Microprocessor based open-air tower clock movement Suitable for open-air dial diameter from 1.2m to 12m Self-setting with master clock upon power recovery from failure Controlled & synchronized by master clock or PC connected Operation reservation upon power failure High efficiency with low power consumption Applicable with or w/o master clock and UT tower clock software

Clock Parts IV – GFClock Yasa Persada, Pt. Website: http://gfclock.com | http://washingtonclocks.com Direct: +62 – 818 802045 | Email: [email protected]

Page: 3 of 11

Clock Solutions OUTDOOR-USE : DESIGN LOW : CONSUMPTION HIGH : EFFICIENCY SELF-SETTING :

-

Entirely metal fabric from internal parts to outer case ( GFA12 is exceptional with ABS outer case) Dust-proof, anti-rust, and weather-resistant Lower power consumption by 50% Cylinder & gears design enables high efficiency with low abrasion Automatically synchronized with master clock

TIME : RESERVATION

-

WIRING INTERFACE REMOTE OPERATION

-

3 months’ operation reservation enables auto correction to master clock’s time on power recovery from a mains power failure Ordinary double-twisted pair wire RS485 output & input Central supervised and controlled with master clock or PC No operation on movement needed Wiring distance to master clock or PC up to 1200m Feedback running status to master clock or PC 0.3 s/d at 25° (independent)

-

Hollow shafts design enables LED

-

Power supply DC 12V Shafts Hour & minute Working Temp. -30 – 85° Humidity 0 – 95%

: : :

TIME : ACCURACY HANDS : ILLUMINATION OTHER : PARAMETER

Clock Parts IV – GFClock Yasa Persada, Pt. Website: http://gfclock.com | http://washingtonclocks.com Direct: +62 – 818 802045 | Email: [email protected]

Page: 4 of 11

Clock Solutions

DIMENSIONS

MODEL

W

W1

L

L1

D

C

S1

S2

S3

H

M

GFA12S GFA25N GFA25L GFA40N GFA40L GFA60N GFA60L

67 130 130 150 150 200 200

110 110 130 130 180 180

99 200 200 230 230 300 300

180 180 210 210 280 280

50 95 95 100 100 159 159

27 60 60 68 68 92 92

15 34 34 58 58 64 64

7 21 21 33 33 39 39

11 11 16 16 22 22

25 95 230 124 250 154 270

15 50 50 65 65 95 95

Clock Parts IV – GFClock Yasa Persada, Pt. Website: http://gfclock.com | http://washingtonclocks.com Direct: +62 – 818 802045 | Email: [email protected]m

Page: 5 of 11

Clock Solutions

GFA Series COMPARISON & SELECTION TABLE OF GFA MOVEMENT

MODEL

Dial Size (cm)

Dial Thickness (mm)

Hour Shaft Length (mm)

Hands Illumination

Operation

GFA12SFP GFA12SFS GFA12SFB GFA12SHP GFA12SHS GFA12SHB GFA25NFP GFA25NFS GFA25NFB GFA25NHP GFA25NHS GFA25NHB GFA25LFP GFA25LFS GFA25LFB GFA25LHB GFA40NFP GFA40NFS GFA40NFB GFA40NHP GFA40NHS GFA40NHB GFA40LFP GFA40LFS GFA40LFB GFA40LHB GFA60NFP GFA60NFS GFA60NFB GFA60NHP GFA60NHS GFA60NHB GFA60LFP GFA60LFS GFA60LFB GFA60LHB

~ 120 ~ 120 ~ 120 ~ 120 ~ 120 ~ 120 120 ~ 250 120 ~ 250 120 ~ 250 120 ~ 250 120 ~ 250 120 ~ 250 120 ~ 250 120 ~ 250 120 ~ 250 120 ~ 250 250 ~ 400 250 ~ 400 250 ~ 400 250 ~ 400 250 ~ 400 250 ~ 400 250 ~ 400 250 ~ 400 250 ~ 400 250 ~ 400 400 ~ 600 400 ~ 600 400 ~ 600 400 ~ 600 400 ~ 600 400 ~ 600 400 ~ 600 400 ~ 600 400 ~ 600 400 ~ 600

~ 10 ~ 10 ~ 10 ~ 10 ~ 10 ~ 10 ~ 60 ~ 60 ~ 60 ~ 60 ~ 60 ~ 60 ~ 200 ~ 200 ~ 200 ~ 200 ~ 60 ~ 60 ~ 60 ~ 60 ~ 60 ~ 60 ~ 200 ~ 200 ~ 200 ~ 200 ~ 60 ~ 60 ~ 60 ~ 60 ~ 60 ~ 60 ~ 200 ~ 200 ~ 200 ~ 200

25 25 25 25 25 25 90 90 90 90 90 90 230 230 230 230 115 115 115 115 115 115 263 263 263 263 154 154 154 154 154 154 270 270 270 270

Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled

w/o Master with Master with or w/o Master w/o Master with Master with or w/o Master w/o Master with Master with or w/o Master w/o Master with Master with or w/o Master w/o Master with Master with or w/o Master with or w/o Master w/o Master with Master with or w/o Master w/o Master with Master with or w/o Master w/o Master with Master with or w/o Master with or w/o Master w/o Master with Master with or w/o Master w/o Master with Master with or w/o Master w/o Master with Master with or w/o Master with or w/o Master

Clock Parts IV – GFClock Yasa Persada, Pt. Website: http://gfclock.com | http://washingtonclocks.com Direct: +62 – 818 802045 | Email: [email protected]

Buttons for Adjusting Hands ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **

Page: 6 of 11

Clock Solutions

GFC Series for 1 – 6 Meter Diameter Three hands: Hour – Minute and Second

Available for 1 – 6 Meter diameter of Dial

Micro-processor based self-setting movement Ideal for open-air tower clock system All metal fabric with stepping motor Remote control enabled Compact design with multiple functions FEATURES Microprocessor based open-air tower clock movement Suitable for open-air dial diameter from 1.2m to 12m Self-setting with master clock upon power recovery from failure Controlled & synchronized by master clock or PC connected Operation reservation upon power failure High efficiency with low power consumption Applicable with or w/o master clock and UT tower clock software

Clock Parts IV – GFClock Yasa Persada, Pt. Website: http://gfclock.com | http://washingtonclocks.com Direct: +62 – 818 802045 | Email: [email protected]

Page: 7 of 11

Clock Solutions

:

-

Entirely metal fabric from internal parts to outer case Dust-proof, anti-rust, and weather-resistant Lower power consumption by 50%

:

-

:

-

Cylinder & gears design enables high efficiency with low abrasion Automatically synchronized with master clock

TIME : RESERVATION

-

WIRING INTERFACE REMOTE OPERATION

-

3 months’ operation reservation enables auto correction to master clock’s time on power recovery from a mains power failure Ordinary double-twisted pair wire RS485 output & input Central supervised and controlled with master clock or PC No operation on movement needed Wiring distance to master clock or PC up to 1200m Feedback running status to master clock or PC 0.3 s/d at 25° (independent)

-

Hollow shafts design enables LED

-

Power supply DC 12V Shafts Hour & Minute & Second Working Temp. -30 – 85° Humidity 0 – 95%

OUTDOOR-USE DESIGN LOW CONSUMPTION HIGH EFFICIENCY SELF-SETTING

:

: : :

TIME : ACCURACY HANDS : ILLUMINATION OTHER : PARAMETER

Clock Parts IV – GFClock Yasa Persada, Pt. Website: http://gfclock.com | http://washingtonclocks.com Direct: +62 – 818 802045 | Email: [email protected]

Page: 8 of 11

Clock Solutions

DIMENSIONS

MODEL

W

W1

L

L1

D

C

S1

S2

S3

S4

H

M

S

GFC25N GFC25L GFC40N GFC40L GFC60N GFC60L

130 130 150 150 200 200

110 110 130 130 180 180

260 260 330 330 410 410

240 240 310 310 384 384

115 115 130 130 159 159

120 120 155 155 192 192

43 43 57 57 100 100

33 33 42 42 64 64

21 21 30 30 39 39

11 11 16 16 22 22

90 230 115 263 154 270

50 50 95 95 95 95

50 50 95 95 95 95

Clock Parts IV – GFClock Yasa Persada, Pt. Website: http://gfclock.com | http://washingtonclocks.com Direct: +62 – 818 802045 | Email: [email protected]

Page: 9 of 11

Clock Solutions

GFC Series COMPARISON & SELECTION TABLE OF GFC MOVEMENT

MODEL GFC25NFP GFC25NFS GFC25NFB GFC25NHP GFC25NHS GFC25NHB GFC25LFP GFC25LFS GFC25LFB GFC25LHB GFC40NFP GFC40NFS GFC40NFB GFC40NHP GFC40NHS GFC40NHB GFC40LFP GFC40LFS GFC40LFB GFC40LHB GFC60NFP GFC60NFS GFC60NFB GFC60NHP GFC60NHS GFC60NHB GFC60LFP GFC60LFS GFC60LFB GFC60LHB

Dial Size (cm)

Dial Thickness (mm)

Hour Shaft Length (mm)

Hands Illumination

Operation

120 ~ 250 120 ~ 250 120 ~ 250 120 ~ 250 120 ~ 250 120 ~ 250 120 ~ 250 120 ~ 250 120 ~ 250 120 ~ 250 250 ~ 400 250 ~ 400 250 ~ 400 250 ~ 400 250 ~ 400 250 ~ 400 250 ~ 400 250 ~ 400 250 ~ 400 250 ~ 400 400 ~ 600 400 ~ 600 400 ~ 600 400 ~ 600 400 ~ 600 400 ~ 600 400 ~ 600 400 ~ 600 400 ~ 600 400 ~ 600

~ 60 ~ 60 ~ 60 ~ 60 ~ 60 ~ 60 ~ 200 ~ 200 ~ 200 ~ 200 ~ 60 ~ 60 ~ 60 ~ 60 ~ 60 ~ 60 ~ 200 ~ 200 ~ 200 ~ 200 ~ 60 ~ 60 ~ 60 ~ 60 ~ 60 ~ 60 ~ 200 ~ 200 ~ 200 ~ 200

90 90 90 90 90 90 230 230 230 230 115 115 115 115 115 115 263 263 263 263 154 154 154 154 154 154 270 270 270 270

Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled

w/o Master with Master with or w/o Master w/o Master with Master with or w/o Master w/o Master with Master with or w/o Master with or w/o Master w/o Master with Master with or w/o Master w/o Master with Master with or w/o Master w/o Master with Master with or w/o Master with or w/o Master w/o Master with Master with or w/o Master w/o Master with Master with or w/o Master w/o Master with Master with or w/o Master with or w/o Master

Clock Parts IV – GFClock Yasa Persada, Pt. Website: http://gfclock.com | http://washingtonclocks.com Direct: +62 – 818 802045 | Email: [email protected]

Buttons for Adjusting Hands ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **

Page: 10 of 11

Clock Solutions

Movement Model Explanation MOVEMENT For Open-Air Tower Clock

GF

Hands Shafts Available Hour, Minute Hour, Minute, Second

A C

Dial Diameter (cm) 60 – 120 120 – 250 250 – 400 400 – 600

12 25 40 60

Dial Thickness (mm) Up to 10 (only for GFA series) Up to 60 Up to 200

S N L

Illumination on Hands Disabled Enabled

F H

Operation Hands adjustment by pressing buttons on movement (Independent movement, not synchronized with master clock) Hands adjustment through master clock or PC software (Secondary movement) Hands adjustment through master clock or PC software as well as by pressing buttons on movement

P S B

For Example: GFA25NFS would be used for dial diameter up to 2.5m with hour and minute hand shafts, not supporting hands illumination and controlled and supervised through master clock or PC, and installed behind a dial with thickness less than 6 cm.

Clock Parts IV – GFClock Yasa Persada, Pt. Website: http://gfclock.com | http://washingtonclocks.com Direct: +62 – 818 802045 | Email: [email protected]

Page: 11 of 11