Installation manual: Parrot MKi + Parrot CK3100 range

The brand This sheet name is designed KIA RIOtoand help theyou KIA with logo are the the installation property of of KIA a Parrot MOTORS. product and is purely for information. Any installation performed in compliance This document withis the onlyinstructions valid for theappearing vehicle model in thisRIO® document year 2011, is done excluding underall the other sole models responsibility in the same of therange installer, and excluding who is entirely later responsible for the qualitymade modifications of thetoinstallation. the vehicleAll byrights the manufacturer. reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation The Parrot brand of Parrot name SA. andPictures logos are forthe information exclusive property only. of Parrot SA.

Fitting time (estimated) / Main features Disassembly

20min

YES

+IGN

Mounting kit

30min

NO

ISO

Reassembly

20min

N/A

UNIKA

Testing

15min

FRONT LOUDSPEAKER

TEL mode

Total

1h25min

ALL

MUSIC mode

Tools - Phillips screwdriver Plastic trim removal tools FACOM / BOJO

- Multimeter or Test lamp - Wire tie - Round file (or a knife)

Accessories required CK range

MKi range

Photos for illustration purposes

Kram ref.

Dealer ref.

CK range

86394

N/A

MKi range

84394X389

N/A

"Please contact your wholesaler to purchase accessories. A list of wholesalers is available at www.certified.parrot.com. "

Updating To get the most out of your hands-free kit we recommend that you update your software regularly. The update procedure can be found at http://www.parrot.com/usa/support/downloads This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

Disassembly

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

Disassembly

1

2

1 2 Using the plastic trim removal tools, firmly unclip the radio and air vent surround and place it on top being careful to disconnect the HAZARD WARNING switch.

3

Using the plastic trim tools, unclip the cover located on the right side of the dashboard.

3 4

Unscrew screws 1, 2, 3 and 4 around the radio. Pull and remove it taking care to disconnect the connectors and aerial.

4

Then remove the passenger side door seal.

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

Microphone passage

1

2

Glue the bracket (supplied) to the windscreen, after having thoroughly degreased the surface.

Using the plastic trim tools, run the cable under the head liner.

3

4

Run the cable replacing the seal on the passenger door.

5

Pass the cable into the dashboard on the right side.

6

Run it behind the glove box passing it underneath.

Then pass the cable towards the radio.

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

Feeding the accessory cable

1

2

In the glove box, using a semirigid guide.

Pass the cable from the top right towards the radio.

3

Be careful to leave enough length.

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

Fitting the hands-free system 1 / 2

1

Connect the adaptor (86394 for the CK or 84394X389 for the Mki) to the original connector and connect all of the wires to the blue box as shown in the diagram below. Test the assembly before reassembly and then slide everything behind the air conditioning control unit.

ISO adapter

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

Fitting the hands-free system 2 / 2

2

Glue the bracket to the top left of the screen, after carefully degreasing the surface.

3

Pass the cable to the radio from the left (taking care to store the cable along the vent).

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

Testing Before refitting the system, switch the kit on using the ignition (or by starting the car). By pushing the central knob of the remote control, check: 1 - that the menu is displayed on the screen (language or iPod etc) 2 - that the radio system is muted when the kit is in use (click in the blue box) 3 - that the sound through all speakers is properly muted 4 - that there is sound through the front speakers for spoken menus 5 - then turn off the ignition, verify that the kit turns off and that the message “goodbye” is displayed on the screen (otherwise reverse the fuses on the kit power supply harness) 6 - pair a telephone with the kit and make a call (check that both the microphone and the kit are working)

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

Reassembly Refit the system using the following procedure: 1 - reinstall the radio reconnecting the adaptor and the antenna 2 - refit the 4 screws (1, 2, 3 and 4) around the radio 3 - clip the cover back on with the air vents (TAKE CARE not to cut the cable) 4 - refit the right dashboard panel

This sheet is designed to help you with the installation of a Parrot product and is purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.