207CC manual: Installation Parrot MKi + Parrot CK3100 range

207CC

The brand This sheet name is designed PEUGEOT to help 207CC youand with thethe PEUGEOT installation logoof area the Parrot property product of AUTOMOBILES and is providedPEUGEOT. purely for information purposes. The installer is solelydocument This responsible is only for valid any installation for the vehicle carried model out207CC® in accordance year 2007 with to 2011, the instructions excluding all in other this sheet models andinfor thethe same quality rangeofand theexcluding installation. laterAll rights reserved modifications made © Copyright to the vehicle 2011byPARROT the manufacturer. SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies The Parrot brand Register name under and logos No. 394 are 149 the exclusive 496 Reproduction property of not Parrot permitted SA. without authorisation from Parrot SA. Images not contractually

207CC

Fitting time (estimated) / Main features Disassembly

20min

YES

ACC wire

Kit installation

30min

NO

ISO

Refitting

20min

YES

UNIKA

Testing

15min

FRONT SPEAKER

TEL mode

Total

1h25min

ALL

MUSIC mode

Tools - TORX screwdriver Plastic trim removal tools FACOM / BERNER

- Multimeter or Test lamp - Hose clamp - Electrical tape

FACOM Sleeve DX-25 (n°4 spanners)

- Round file (or a knife)

Accessories required CK range

MKi range

Kram ref.

Dealer ref.

CK range

86 165

9706 AP

MKi range

84744

9706AT

"Please contact your Wholesaler to purchase accessories. " Photos not contractually binding

Updating To get the most out of your hands-free kit we recommend that you update your software regularly. The update procedure can be found at www.parrot.com/usa/support/downloads This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

207CC

Disassembly

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

207CC

Disassembly 1 / 2

1

2

Insert the removal tools into the slots on each side of the radio.

Unclip, pull and remove the radio taking care to unplug the connector and the antenna.

3

4 If you have the 6 CD changer

Using the plastic trim tools, unclip the storage compartment.

Remove it in the same way as you did the radio.

5

6

1

Using the plastic trim tools, unclip the air vent/central display surround.

2

Remove screws 1 and 2.

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

207CC

Disassembly 2 / 2

7

8

Using the plastic trim tools, unclip the front without removing it.

Using the plastic trim tools, unclip the clip located on the left side of the dashboard.

9

Release the fuse box cover.

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

207CC

Microphone passage

On the Coupe Cabriolet model of the 207, we recommend fitting the microphone to the upper steering wheel panel to avoid air whirls when the roof is down.

1

Stick the bracket supplied to the panel above the steering column after cleaning the surface.

2

Pass the cable towards the radio housing.

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

207CC

Feeding the accessory cable

1

2

In the glove box, unclip the RCA connection support and disconnect it.

3

Using a knife or drill, make a notch on the back of the support.

4

Pass the cable from the hole towards the radio.

Reconnect and re-fit the cover leaving sufficient length of cable.

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

207CC

Power supply

This procedure for wiring the permanent +12V only applies to cars with the 6 CD changer.

1

2

Cut the red wire in front of the fuse for adaptor 84744 or for the kit bundle supplied for the CK. Then connect a wire to it.

3

Run the wire from the radio housing towards the steering column.

4

Run it under the steering wheel using a guide.

Fit a 2.5mm terminal and connect the wire to the yellow fuse holder. (Check that the +12V is permanent.)

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

207CC

Fitting the hands-free system 1 / 2

1

Connect the adaptor 86165 for the CK or the 84744/9706AT for the Mki to the original connector. Connect all of the wires to the blue box as shown in the diagram below. Test the assembly before reassembly then slide all the cables behind the glove box and attach them with wire ties.

ISO adapter

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

207CC

Fitting the hands-free system 2 / 2

2

3

Stick the support supplied to the display panel after having cleaned the surface.

Run the cable between the panel and the dashboard towards the radio.

4

4

Replace screws 1 and 2.

Clip the display panel and its surround back on. (Make sure that you DO NOT cut the cable.)

12

MKi9100 option

4b Pull the cable through from the bottom of the air vents and stick the bracket to the surface. (After cleaning it.)

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

207CC

Testing Before refitting the system, switch the kit on using the ignition (or by starting the car). By pushing the central knob of the remote control, check: 1 - That the menu is displayed on the screen. (Language or iPod.) 2 - That the system can be muted. (Click on the blue box.) 3 - That there is no sound coming from the speakers. 4 - That the sound from the voice menu is coming out of the front speakers. 5 - Then turn off the ignition, check that the kit switches off and that the "goodbye" message appears on the screen. (If this fails, reverse the fuses on the kit's wiring harness.) 6 - Pair a telephone with the kit to make a call, (Check that both the microphone and the kit are working.)

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

207CC

Reassembly Refit the system using the following procedure: 1 – Re-install the radio reconnecting the adapter and antenna.

2 - Replace the storage compartment.

3 – Re-fit the fusebox cover by pushing hard.

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually