Installation manual: Parrot MKi + Parrot 508 CK3100 range

508

The brand This sheet name is designed PEUGEOT to help 508 you and with the PEUGEOT the installation logo areofthe a Parrot property product of AUTOMOBILES and is provided PEUGEOT. purely for information purposes. The installer is solelydocument This responsible is only for valid any installation for the vehicle carried model out508® in accordance year 2010 to with 2011, theexcluding instructions all other in thismodels sheet and in the forsame the quality range and of the excluding installation. later All rights reserved modifications made © Copyright to the vehicle 2011byPARROT the manufacturer. SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies The Parrot brand Register name under and logos No. 394 are 149 the exclusive 496 Reproduction property of not Parrot permitted SA. without authorisation from Parrot SA. Images not contractually

508 Fitting time (estimated) / Main features Disassembly

20min

NO

ACC wire

Kit installation

30min

NO

ISO

Refitting

20min

N/A

UNIKA

Testing

15min

FRONT SPEAKER

TEL mode

Total

1h25min

ALL

MUSIC mode

Tools Plastic trim removal tools FACOM / BERNER

- TORX screwdriver - Multimeter or Test lamp - Hose clamp - Electrical tape - Drill and large diameter cutter

Accessories required CK range

MKi range

Kram ref.

Dealer ref.

CK range

86 165

9706CF+AT

MKi range

84744

9706AT

"Please contact your Wholesaler to purchase accessories." Photos not contractually binding

Updating To get the most out of your hands-free kit we recommend that you update your software regularly. The update procedure can be found at www.parrot.com/usa/support/downloads This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

508

Disassembly

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

508 Disassembly 1 / 3 ATTENTION: it is essential that you do not turn on the ignition during the kit disassembly and assembly procedure as this will cause error codes to be generated on the electronic boxes. If this happens, use the diagnosis set to wipe the error codes. On the Electric and e-HDI versions, do not disconnect or bridge the battery as there is a risk of the charge capacitor exploding.

2

1

1 Using the plastic trim tools, unclip the dashboard panel.

Remove screw 1 on the left-hand side next to the speedometer.

4

3

2

Remove screw 2 on the righthand side.

Using the plastic trim tools unclip the panel with the air vent and the central screen. Remove it and disconnect it.

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

508 Disassembly 2 / 3

5

6

3 Using the plastic trim tools, unclip the plastic car stereo surrounds.

Remove screw 3 located on the left side of the radio.

7

8

4

Remove screw 4 located on the right side of the radio.

Unclip the radio faceplate and disconnect it.

9

10

5

6

Remove screws 5 and 6, pull and remove the radio disconnecting the connector and the antenna.

Open the ashtray cover.

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

508 Disassembly 3 / 3

11

12

Unclip the ashtray and remove it.

Unclip the gearstick cover.

13

14

Unclip the DIAG socket and take it out from underneath towards the gearstick housing.

Unclip the panel on the left-hand side of the dashboard.

16

15

Release the fuse box cover.

Remove the door seal on the driver’s side.

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

508 Finding an ACC wire

1

2

Using a jumper or a pigtail connection, connect a wire to the RED wire in position 1 on the DIAG socket.

3

Insulate with electrical tape. Push the connector back and clip it into its housing from underneath.

4

Pass the wire from the underneath towards the radio housing.

5

For adapter 86165 cut the orange wire between the fuse holder and the ISO connector (supplied) and connect the ACC wire.

For adapter 84744/9706AT/9706CF+AT disconnect the blue or orange wire in front of the fuse then connect the ACC wire. This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

508 Microphone passage

1

2

Stick the bracket (supplied) to the cabin light panel, after having thoroughly cleaned the surface.

Using the plastic trim tools, run the cable under the headliner and down the windscreen post on the driver’s side.

3

4

Run the cable replacing the seal on the driver's side door.

Pass the cable into the dashboard on the left side.

5

Then run it, attaching with wire ties under the dashboard. towards the radio. This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

508 Feeding the accessory cable

1

Make a 22 mm hole and feed the cable through towards the radio and fit the cover supplied. Then pull it out making sure you leave sufficient length.

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

508 Fitting the hands-free system 1 / 2

1

Connect the adaptor to the original connector. Connect all of the wires to the blue box as shown in the diagram below. Test before refitting then slide the assembly down after refitting the radio.

ISO adapter

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

508 Fitting the hands-free system 2 / 2

2

Behind the storage compartment below the screen.

3

Use a cutter to make a 10mm hole in the bottom and feed the screen cable through.

5

4

Then feed it between the air vents towards the radio housing.

Stick the support (supplied) in the storage compartment after cleaning the surface, cutting it level with the joint.

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

508 Testing Before refitting the system, switch the kit on using the ignition (or by starting the car). By pushing the central knob of the remote control, check: 1 - That the menu is displayed on the screen. (Language or iPod.) 2 - That the system can be muted. (Click on the blue box.) 3 - That there is no sound coming from the speakers. 4 - That the sound from the voice menu is coming out of the front speakers. 5 - Then turn off the ignition. Check that the kit switches off and that the "goodbye" message appears on the screen. (If this fails, reverse the fuses on the kit's wiring harness.) 6 - Pair a telephone with the kit to make a call. (Check that both the microphone and the kit are working.)

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

508 Reassembly Refit the system using the following procedure: 1 – Reconnect the adaptor and the antenna and re-fit the radio. (Put the blue box with the cables underneath.) 2 - Replace screws 5 and 6. 3 - Reconnect the connector on the radio faceplate and clip it back in place. 4 - Replace screws 3 and 4 and replace the plastic covers. 5 - Clip the air vent surrounds and the screen back in place. 6 - Replace screws 1 and 2 and clip the dashboard panel back into place. 7 - Clip the gear stick cover back in place and replace the ashtray. 8 – Re-fit the fusebox cover by pushing firmly. 9 – Re-fit the panel on the left-hand side of the dashboard.

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually