BERLINGOmanual: Installation Parrot MKi + Parrot CK3100 range

BERLINGO

The brand This sheet name is designed CITROËN to help BERLINGO you with andthe theinstallation CITROËN logo of aare Parrot the property product of and CITROËN is provided AUTOMOBILES. purely for information Images not contractually purposes. The binding. installer is solelydocument This responsible is only for valid any installation for the vehicle carried model outBERLINGO® in accordance yearwith 2008the to 2011, instructions excluding in this all other sheetmodels and forinthe thequality same range of theand installation. excluding All rightsmodifications later reserved © made Copyright to the2011 vehicle PARROT by theSA, manufacturer. a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies The Parrot brand Register name under and logos No. 394 are 149 the exclusive 496 Reproduction property of not Parrot permitted SA. without authorisation from Parrot SA. Images not contractually

BERLINGO

Fitting time (estimated) / Main features Disassembly

20min

YES

ACC wire

Kit installation

30min

NO

ISO

Refitting

20min

YES

UNIKA

Testing

15min

FRONT SPEAKER

TEL mode

Total

1h25min

ALL

MUSIC mode

Tools - TORX screwdriver Plastic trim removal tools FACOM / BERNER

- Multimeter or Test lamp - Hose clamp - Electrical tape

FACOM Sleeve DX-25 (n°4 spanners)

- Round file (or a knife)

Accessories required CK range

MKi range

Kram ref.

Dealer ref.

CK range

86 165

9706AP

MKi range

84744

9706AT

“Quick Connect harness references available at http://certified.parrot.com/faisceaux_US.php" Photos not contractually binding

Updating To get the most out of your hands-free kit we recommend that you update your software regularly. The update procedure can be found at www.parrot.com/usa/support/downloads This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

BERLINGO

Disassembly

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

BERLINGO

Disassembly 1 / 2

1

2

Insert the removal tools into the slots on each side of the radio.

Unclip, pull and lift the radio disconnecting the antenna connector.

3

4

1

Using the plastic trim tools, unclip and remove the storage compartment from the centre console. (Do not disconnect it.)

5

2

3

4

Remove screws 1, 2, 3 and 4 located above the glove box.

6

Using the plastic trim tools, unclip the top of the glove box. (Do not remove it.)

Using the plastic trim tools, unclip the clip located on the left side of the dashboard.

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

BERLINGO

Disassembly 2 / 2

7

8

Release the top of the fuse box cover and place it on the floor, making sure not to remove it.

Remove the door seal on the driver’s side.

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

BERLINGO

Microphone passage

1

2

Stick the bracket supplied to the windscreen, after cleaning the surface, and run the cable under the headliner.

Run the cable along the passenger side door pillar while replacing the door seal.

3

4

Pass the cable into the dashboard on the left side.

Then run it under the steering wheel towards the radio housing, attaching it with wire ties.

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

BERLINGO

Feeding the accessory cable

1

2

Using a guide, feed the cable from the glove box towards the radio housing.

Feed the cable through the hole on the right of the glove box making sure you leave sufficient length.

3

Replace screws 1, 2, 3 and 4 located above the glove box.

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

BERLINGO

Fitting the hands-free system 1 / 2

1

Connect the adaptor (86165/9706AP for the CK or the 84744/9706AT for the Mki) to the original connector. Connect all of the wires to the blue box as shown in the diagram below. Test before reinstalling then slide the assembly into the bottom housing of the central console. (Located under the storage compartment.)

ISO adapter

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

BERLINGO

Fitting the hands-free system 2 / 2

2

3

! Bevel cut the two left-hand corners (top and bottom left) of the support supplied. After thoroughly cleaning the surface, stick it between the air vents on the left side of the radio.

Feed the cable through the storage compartment housing. (Make sure you do not cut the cable.)

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

BERLINGO

Testing Before refitting the system, switch the kit on using the ignition (or by starting the car). By pushing the central knob of the remote control, check: 1 - That the menu is displayed on the screen. (Language or iPod.) 2 - That the system can be muted. (Click in the blue box.) 3 - That there is no sound coming from the speakers. 4 - That the sound from the voice menu is coming out of the front speakers. 5 - Then turn off the ignition, check that the kit switches off and that the "goodbye" message appears on the screen. (If this fails, reverse the fuses on the kit's wiring harness.) 6 - Pair a telephone with the kit to make a call. (Check that both the microphone and the kit are working.)

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually

BERLINGO

Reassembly Re-fit the system using the following procedure: 1 - Replace the storage compartment. 2 – Re-install the radio reconnecting the adaptor and the antenna. 3 – Re-fit the fusebox cover by pushing hard. 4 – Re-fit the panel on the left-hand side of the dashboard.

This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually