Installation manual: Parrot MKi + Parrot CK3100 range

The brand This document nameisKIA a tool PICANTO to assist andwith the the KIA installation logo are theofproperty a Parrotofproduct KIA MOTORS. and is supplied purely for information. Any installation performed in compliance This document withis the onlyinstructions valid for theappearing vehicle model in thisPICANTO® documentyear is done 2011,under excluding the sole all other responsibility models inofthe thesame installer, rangewho and isexcluding entirely later responsible for the qualitymade modifications of thetoinstallation. the vehicle All by the rights manufacturer. reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation The Parrot brand name of Parrot andSA. logos Pictures are the forexclusive information property only. of Parrot SA.

Fitting time (estimated) / Main features Disassembly

20min

YES

+APC

Mounting kit

30min

NO

ISO

Refitting

20min

N/A

UNIKA

Testing

15min

FRONT SPEAKER

TEL mode

Total

1h25min

ALL

MUSIC mode

Tools - Phillips screwdriver Plastic trim removal tools FACOM / BOJO

- Multimeter or Test lamp - Wire tie - Round file (or a knife)

Accessories required CK range

MKi range

Photos for illustration purposes

Kram ref.

Dealer ref.

CK range

86394

N/A

MKi range

84394X389

N/A

"Please contact your wholesaler to purchase accessories. List of wholesalers available at www.certified.parrot.com." »

Updating To get the most out of your hands-free kit, we recommend that you update your software regularly. The procedure for doing this can be found at www.parrot.com/usa/support/downloads This document is a tool to assist with the installation of a Parrot product and is supplied purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

Disassembly

This document is a tool to assist with the installation of a Parrot product and is supplied purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

Disassembly

1

2

1 2 Using the plastic trim tools, firmly unclip the radio cover and the air vents and remove the radio

Unscrew screws 1 and 2 located on the left side of the radio

4

3

3 4 Unscrew screws 3 and 4 located on the right side of the radio

Pull and lift the radio disconnecting the connectors and the antenna

6

5

Using the plastic trim tools, unclip the cover located on the right side of the dashboard

Remove the passenger side door seal

This document is a tool to assist with the installation of a Parrot product and is supplied purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

Microphone passage

1

3

2

Glue the bracket (supplied) to the windscreen, after having thoroughly degreased the surface

Using the plastic trim tools, run the cable under the head liner

Run the cable replacing the seal on the passenger door

Pass the cable into the dashboard on the right side

5

4

6

Run it behind the glove box

Then pass the cable towards the radio

This document is a tool to assist with the installation of a Parrot product and is supplied purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

Feeding the accessory cable

1

2

In the glove box, using a semirigid guide

Pass the cable from the top right towards the radio

3

Be careful to leave enough length

This document is a tool to assist with the installation of a Parrot product and is supplied purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

Fitting the hands-free system 1 / 2

1

Connect the adaptor (86394 for the CK or 84394X389 for the Mki) to the original connector and connect all of the wires to the blue box as shown in the diagram below. Test the assembly before reassembly and then slide everything behind the air conditioning control unit

ISO adapter

This document is a tool to assist with the installation of a Parrot product and is supplied purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

Fitting the hands-free system 2 / 2

2

Glue the bracket to the top left of the screen, after carefully degreasing the surface

3

Using a drill or file, make a notch in the air vent cover at the top opposite the screen mounting

This document is a tool to assist with the installation of a Parrot product and is supplied purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

Testing Before refitting the system, switch the kit on using the ignition (or by starting the car). By pushing the central knob of the remote control, check: 1 - that the menu is displayed on the screen (language or iPod etc) 2 - that the radio system is muted when the kit is in use (click in the blue box)

3 - that the sound through all speakers is properly muted 4 - that there is sound through the front speakers for spoken menus 5 - then turn off the ignition, verify that the kit turns off and that the message “goodbye” is displayed on the screen (otherwise reverse the fuses on the kit power supply harness) 6 - pair a telephone with the kit and make a call (check that both the microphone and the kit are working)

This document is a tool to assist with the installation of a Parrot product and is supplied purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.

Refitting Refit the system using the following procedure: 1 - reinstall the radio reconnecting the adaptor and the antenna

2 - refit the 4 screws (1, 2, 3 and 4) around the radio 3 - re-clip the cover with the air vents placing the screen cable in the notch (pay ATTENTION to avoid cutting the cable) 4 - refit the right dashboard panel

This document is a tool to assist with the installation of a Parrot product and is supplied purely for information. Any installation performed in compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without the authorisation of Parrot SA. Pictures for information only.