Training schedule – 2014

ABB oil and gas products Training services

Professional training for engineers, operators, programmers, and maintenance personnel.

ABB has helped customers achieve optimized equipment performance by providing cost-effective, high quality, technical training. Our trainers have over 65 years of experience in the gas measurement industry. From equipment testing, field servicing and remote troubleshooting, they offer a wealth of information to increase your knowledge and productivity.

2 | Training schedule – 2014

Enrollment To enroll in scheduled training classes held at any facility, students should enroll online at the ABB University Website: www.abb.us/abbuniversity. If unable to enroll online, students can email training at [email protected] to request a manual enrollment form. Payment arrangements should be made at the time of enrollment. Students are responsible for travel, lodging and other expenses. Enrollment confirmations will be emailed upon approval. Enrollees should receive a reminder email approximately two (2) weeks prior to the class start date. If, for any reason, the location of the class is changed, students will be notified. Course cancellation policy ABB reserves the right to reschedule, discontinue or cancel a course due to insufficient enrollment of students. In the event of a course change or cancellation, the student will be notified two (2) weeks before the class. Students who cancel enrollment between three (3) and ten (10) business days prior to the class start date will be charged a $100 cancellation fee. “No Show” students and students who cancel enrollment less than three (3) business days prior to the class date will be responsible for the full tuition, regardless of payment arrangements.

Dress code policy In an effort to maintain a safe and professional environment, we ask that students attending our facility avoid open toed shoes, shorts, tank tops or T-shirts with inappropriate artwork. Scheduled classes All instructor-led classes for open enrollment adhere to the following standards: – Classes held at a ABB facility are $1,000 per student (facilities are listed on the back) – Class duration is three (3) days – Daily class schedule is 8:30 a.m. to 4:30 p.m. – Classes are limited to a maximum of eight (8) students with a minimum of four (4) students to hold the class Miscellaneous If students require any additional information or a map to aid with travel plans, please do not hesitate to contact the enrollment coordinator ([email protected]). Students are responsible for travel, accommodations and meal arrangements.

Training schedule – 2014 | 3

General training information

Additional classes available upon request. In addition to regular scheduled classes, ABB offers alternative classes. They include self-paced online classes, remote online training by appointment and individual classes by appointment.

4 | Training schedule – 2014

Self-paced online classes Two standard classes, Flow Computer – Level 1 (Z230e) and Gas Chromatograph – Level 1 (Z231e) are available as selfpaced classes through the online ABB University website. These classes are free, but registration and approval are required. Upon approval, students may view segments at their leisure. Windows ® Media Player is required for these classes.

Bi-monthly webinar training In an effort to provide as much training as possible, ABB will hold webinars twice a month lasting 1 to 2 hours. The topics for each webinar will be decided at the beginning of each month and the training department will send a notification via newsletter with details about the topics. Contact the Bartlesville Training Department for more information.

Remote online training by appointment Three of our standard classes, Flow Computer – Level 1 (Z900), WinCCU32 Software (Z930) and Gas Chromatograph – Level 1 (Z920) are available for remote training via the Internet. Standard pricing is applicable for up to five (5) remote locations with a maximum of ten (10) students total. Additional locations require a surcharge. These classes are by appointment only, and a minimum of 90 days is required for scheduling. A purchase order covering the cost of the class is required before a reservation may be held. Two curriculums are offered: – Standard three (3) day class: $2500 – Modified curriculum two (2) day class: $1500

Classes by appointment Since it is not always convenient for a customer to send employees to a training facility, ABB offers training programs at the customer’s site. For these classes, the customer must provide classroom facilities, PC or laptop computers, LCD projector equipment, and laboratory materials. Items not provided by the customer can be provided by ABB with an additional charge for shipping and handling. Two curriculums are offered: – Standard three (3) day class: $9500 plus T & L* – Modified curriculum two (2) day class: $6500 plus T & L* *Travel and living expenses for the instructor will be billed at actual cost. Classes are limited to eight (8) students, with additional students billed at $250 each.

A lead time of 90 days is required to provide sufficient time to schedule customer-site courses. A purchase order or payment covering the course and estimated travel and living for the instructor must be received at least four (4) weeks before the start date of the course. Training requirements longer than two (2) weeks in duration will result in an additional round trip to the location for the instructor. Custom classes or classes made up of subject materials from more than one standard class require a detailed quote and will include preparation time for the instructor and required class materials.

Training schedule – 2014 | 5

Training course descriptions

Flow Computer – Level 1 (Z900)

Flow Computer – Level 2 (Z901)

Production Automation (Z910)

– – – – – – – – – – – –

– – – – – – – – – – –

– – – –

Identify hardware PCCU32 software Local communication Configuration files 32-Bit Loader Save/restore functions Software/hardware security system Data trending Modification of unit display Basic math operations Calibrate Data collection

Setup/use TFIO modules Multi-tube measurement applications Configuration files 32-Bit Loader Save/restore functions Holding registers and advanced operations EZ Blocks Modify annunciators/unit display Data trending Data collection and reporting Remote and MODBUS protocols

Troubleshoot reduced gas production Increase gas production/revenues Setup/operate applications Configure WellTell to receive remote I/O signals and support other ABB products – Overview LevelMaster technology in tanks – EZ Blocks Builder software

Gas Chromatograph – Level 1 (Z920)

Gas Chromatograph – Level 2 (Z921)

WinCCU32 Software (Z930)

– – – – – – – – – – – – –

– – – – – – – – – – – – – –

– – – – – – – – – – – –

Identify hardware PCCU32 software Local communication Configuration files 32-Bit Loader Save/restore functions Manual peak find Troubleshooting peaks Data integration Trending Basic operations Test valves Test pressure sensors manually

6 | Training schedule – 2014

Manual peak find MODBUS communication Ethernet remote comms Configuration files 32-Bit Loader Save/restore functions Data integration Trending Setup math operations Test/adjust forward flow and inject times Manual operation for testing Troubleshooting test results Setup/troubleshoot alarms External meas. tube integration/GC control

Setup WinCCU32/WinCPC software Create/manage meter identifications Define meter groups Define communication ports/types Execute remote data collection Archive long-term database Reporting Trending Editing data Create/edit/modify custom reports Setup scheduling Setup alarms

Course schedule by location

Our training courses are instructor-led with interactive classroom discussions, presentations and lab exercises. At least half of the class time consists of hands-on operation and lab activities. Typical participants for flow computers are responsible for operation and maintenance of flow computers, production automation equipment and control software. For GC classes, participants are responsible for operation, installation and maintenance of the chromatograph. In software, participants are responsible for WinCCU32, including auditing trail, editing, archiving, and reporting data.

Location

Bakersfield, CA

Bartlesville, OK

Date

Class

Location

Date

Class

07/22/14

Flow Computer – Level 1 (Z900)

09/09/14

Flow Computer – Level 2 (Z901)

03/18/14

WinCCU32 Software (Z930)

06/03/14

Flow Computer – Level 1 (Z900)

06/10/14

Flow Computer – Level 2 (Z901)

02/04/14

Flow Computer – Level 1 (Z900)

07/29/14

Gas Chromatograph – Level 1 (Z920)

04/22/14

Flow Computer – Level 2 (Z901)

09/23/14

Flow Computer – Level 1 (Z900)

07/08/14

Production Automation (Z910)

09/30/14

Flow Computer – Level 2 (Z901)

08/26/14

Flow Computer – Level 1 (Z900)

10/28/14

Gas Chromatograph – Level 1 (Z920)

11/04/14

Gas Chromatograph – Level 1 (Z920)

01/07/14

Flow Computer – Level 1 (Z900)

03/11/14

Flow Computer – Level 1 (Z900)

01/14/14

Flow Computer – Level 2 (Z901)

04/08/14

Gas Chromatograph – Level 1 (Z920)

02/04/14

Production Automation (Z910)

04/29/14

Gas Chromatograph – Level 2 (Z921)

02/25/14

Gas Chromatograph – Level 1 (Z920)

05/20/14

Flow Computer – Level 2 (Z901)

03/18/14

WinCCU32 Software (Z930)

06/10/14

Gas Chromatograph – Level 2 (Z921)

03/25/14

Gas Chromatograph – Level 2 (Z921)

07/15/14

Production Automation (Z910)

04/01/14

Flow Computer – Level 1 (Z900)

07/29/14

Flow Computer – Level 1 (Z900)

04/08/14

Flow Computer – Level 2 (Z901)

08/26/14

Gas Chromatograph – Level 1 (Z920)

05/06/14

Gas Chromatograph – Level 1 (Z920)

01/28/14

Flow Computer – Level 1 (Z900)

05/13/14

Gas Chromatograph – Level 2 (Z921)

03/25/14

Flow Computer – Level 2 (Z901)

06/10/14

Production Automation (Z910)

04/29/14

Gas Chromatograph – Level 1 (Z920)

06/24/14

Flow Computer – Level 1 (Z900)

06/24/14

WinCCU32 Software (Z930)

07/15/14

Flow Computer – Level 2 (Z901)

07/08/14

Flow Computer – Level 1 (Z900)

08/05/14

Gas Chromatograph – Level 1 (Z920)

01/28/14

Gas Chromatograph – Level 1 (Z920)

08/12/14

Gas Chromatograph – Level 2 (Z921)

04/15/14

Flow Computer – Level 1 (Z900)

09/16/14

Flow Computer – Level 1 (Z900)

05/06/14

Flow Computer – Level 2 (Z901)

09/23/14

Flow Computer – Level 2 (Z901)

08/19/14

Flow Computer – Level 2 (Z901)

10/14/14

WinCCU32 Software (Z930)

10/21/14

Gas Chromatograph – Level 1 (Z920)

10/28/14

Gas Chromatograph – Level 2 (Z921)

11/11/14

Production Automation (Z910)

11/18/14

Flow Computer – Level 1 (Z900)

12/02/14

Flow Computer – Level 2 (Z901)

12/09/14

Flow Computer – Level 1 (Z900)

Bismarck, ND

Liberal, KS

Natrona Heights, PA

Odessa, TX

Pleasanton, TX

Training schedule – 2014 | 7

ABB Inc. Totalflow product training services Ph: +1 918 338 4888 (option 3) +1 800 442 3097 (US only) [email protected] www.abb.us/abbuniversity Oklahoma Office 7051 Industrial Boulevard Bartlesville, OK 74006 Ph: +1 918 338 4888 +1 800 442 3097 (US only) California Office 4300 Stine Road, Suite 405-407 Bakersfield, CA 93313 Ph: +1 661 833 2030 Kansas Office 2705 Centennial Boulevard Liberal, KS 67901 Ph: +1 620 626 4350 North Dakota Training Facility 1500 Edwards Avenue Bismarck, ND 58506 Ph: +1 800 442 3097 (option 3)

Pennsylvania Office 2 Acee Drive Natrona Heights, PA 15065 Ph: +1 724 295 6100 Texas Offices 3700 West Sam Houston Parkway South, Suite 600 Houston, TX 77042 Ph: +1 713 587 8000

Note: We reserve the right to make technical changes or modify the contents of this document without prior notice. Training is only available to ABB customers. These customers are end users of ABB products and/or engineering or contracting firms legitimately acting on behalf of end users of ABB products. ABB reserves the right to decline training to anyone who is not deemed to be an ABB customer. Copyright ©2013 ABB All rights reserved.

3900 South County Road 1290 Odessa, TX 79765 Ph: +1 432 563 5144 150 Eagle Ford Road Pleasanton, TX 78064 Ph: +1 830 569 8062 www.abb.com/totalflow

TrainingBrochure_2014

Contact us