Training Review 2015
, and First Deputy Prime Minister
3
At Alba, we consider people our most valuable resource and in today’s competitive world we must continue to push the envelope on training and development. We believe that it is through dedication and an enduring commitment to education that our company and employees will continue to grow and prosper for future generations. The Training and Recruitment Department plays a major role in developing the future generations of leaders at Alba. We focus on finding the right development paths for the employees and providing them the right tools for success. Through our training and development programmes we strive to improve employee capabilities and organisational competences, which in turn leads to a more productive and satisfied workforce. At Alba, we are very proud that to have achieved an 87% Bahrainisation level. Working together with our education partners, we take pride in developing the future generation of Bahraini leaders. Alba strives to ensure that we provide a unique and excellent place for our employees to work and we understand the pivotal role that we play within the Kingdom of Bahrain. Alba is in the “People Business” and the success of our people is linked directly to the bottom line. Tim Murray Chief Executive Officer
MESSAGE FROM THE CEO
5
Total Training Hours 2012
2013
2014
2015 (as of July)
COMPUTER
16
3,060
4,064
1,323
SAP
1,638
1,236
2,873
2,236
VEHICLE
92,649.6
74,800.5
38,069.6
15,670
SAFETY
15,860
26,982
22,113
13,879
MANAGEMENT
0
5,140
14,543
6,835
TECHNICAL
121,249
66,701.6
143,614
81,228
SKILL MATRIX
43,012
53,713
35,743.6
21,188
TDP
36,054.5
56,278.7
138,264
93,591
TOTAL
310,479.1
287,911.8
399,284.2
235,950
4
TRAINING STATISTICS
Number Of Employees Trained 2012
2013
2014
2015 (as of July)
COMPUTER
4
300
478
136
SAP
157
217
383
255
VEHICLE
1,593
1,264
980
436
SAFETY
2,872
3,707
4,736
5,416
MANAGEMENT
0
293
1,270
911
TECHNICAL
1,651
1,731
4,027
3,224
SKILL MATRIX
339
492
476
363
TDP
37
69
112
110
TOTAL
6,653
8,073
12,462
10,851
CHAPTER 1 EXECUTIVE AND MANAGEMENT SERIES Course Title: “Leadership” Programme based on Robert E. Lee book. Duration: 1 Day Speaker: Speakers Karyn Williams Sykes & Adnan Butt from Bahrain Institute Overview: Robert E. Lee was a leader for the ages. He was an American soldier and was known as an exceptional officer, a brilliant strategist and combat engineer in the United States Army for 32 years. The man heralded by Winston Churchill as “one of the noblest Americans who ever lived” inspired an out-manned, outgunned army to achieve greatness on the battlefield. The course highlighted the life of Robert E. Lee, which taught many important lessons and helped people triumph over challenges faced every day in business and other walks of life. Course Title: “Public Speaking” Programme for Management Duration: 2 days Speaker: Andrew Card, Simon Doyle and Davind Rendall from EMIC Institute Overview: Of all the skills employers’ desire in employees, oral communication skills rank the highest. Many surveys reveal that oral communication skills are considered even more important than writing and math skills as well as a number of other job-related qualities, such as initiative, technical competence, and organisational abilities. Focusing on oral communication can help employees gain an edge. Effective oral communication skills help people to improve their performance, enhance their subsequent professional competence and improve their own personal effectiveness. The course helped all attendees to gain an insight on oral communication and public speaking and further develop these skills.
7
6
CHAPTER 1 EXECUTIVE AND MANAGEMENT SERIES Course Title: “Coaching & Mentoring” for Executives and Managers Duration: 1 day Speaker: John E Skladan, a well-known trainer with over 45 years’ experience of working with corporates such as Honeywell, Navistar and Arc Automotive at Leadership levels. Overview: Coaching and mentoring are often the key elements of good capacitybuilding practice. In the past decade, coaching and mentoring have increasingly been practised within the civil society sector, which are in line with the trend towards ongoing capacity-building processes rather than one-off events. The course addressed the topics of coaching and mentoring, which are popular capacity-building tools, especially in the area of leadership development. It gave a detailed understanding on what coaching and mentoring really involve, and where and when they work. Course Title: “LPI 360 Feedback” for all Executives and Managers Duration: 3 days Speaker: Prof. Richard Daft from Vanderbilt University Overview: Conducted in coordination with Vanderbilt University, the 360 Feedback was an objective and aggregate rating of each leader’s skills from all directions - direct reports, boss, and peers who work with that leader. The objective of this 360 feedback exercise was to aid Alba’s leaders learn how others perceive their behaviour, and help them identify their strengths and areas for improvement to build a positive culture at Alba.
CHAPTER 2 SOFT SKILLS COURSES Course Title: Leadership and Influence - Based on Gen. Colin Powell Leadership Style Duration: 1 day Speaker: John David Sicilia & Don Lee Redinius, BIHR Training Overview: This course sought to enhance the participants’ leadership skills and performance by learning and applying proven leadership methods, principles and rules developed by Colin Powell throughout his career. It included understanding of leadership and its impact on organizational performance and highlighted current and future leaders with proven leadership principles, methods and rules. Course Title: The Six Sigma Green Belt Training Programme for Management Duration: 5 days Speaker: In-house Master Black Belt Specialist Waleed Tamimi and his team Overview: The Six Sigma methodology was selected as a base for sustainable continuous improvement. Alba has successfully implemented eight Six Sigma projects. As part of a capability building model, continuous Six Sigma training sessions were held during the year. The objectives of the courses held were to: • Reduce Operational Cost • Increase Revenue • Increase Throughput • Eliminate Waste • Minimise/Eliminate variations in processes • Improve Sustainability
9
8
CHAPTER 2 SOFT SKILLS COURSES Course Title: Supervisory Management Development Programme for Management Duration: 5 days Speaker: EMIC Training by Simon Doyle Overview: The course aimed to develop all Alba’s supervisors and 1st line staff in supervisory management and team development areas to perform improved activities in required areas of the organisation. It also looked at ways to improve performance of supervisors through planning, resource allocation and managing time effectively, as well as building skills needed to develop efficient work relationships linked to performance management in order to meet agreed business objectives. Outline: • Building Self Esteem and Assertive Skills • Effective Communication Techniques • The Art of Delegating Effectively • Solving Simple Workplace Problems and making Routine Decisions • Building Better Teams • Conflict Resolution Techniques • Business Coaching Techniques
CHAPTER 2 SOFT SKILLS COURSES Course Title: High Performance Leadership Training for 2nd Line Management Duration: 4 days Speaker: EMIC Training by Andrew Card and Simon Doyle Overview: The course covered vital aspects of leadership such as effective time management, planning and delegation, advanced management and leadership principles and techniques. In addition, it also involved a unique pre-assessment of leadership qualities at the beginning of the course and 3 months after. Course Title: Industrial and Employee Relationship programme Duration: 4 days Speaker: Robert Coates, a management consultant with experience in conducting programmes in UK and UAE. Overview: The objective of this programme was to provide an engaging workshop to all 1st and 2nd Line management staff in order to create a positive industrial relation and employee relation culture in Alba. Course Title: Leadership & Change Management Programme for Management Duration: 1 Day Speaker: John Skladan Overview: Change is an ongoing and important process. For a successful organisation, change management in the role of leadership is essential for the healthy growth of any business. Change is impossible without the active participation of management. The course allowed attendees to understand the aspects of change management and its importance for successfully running an organisation.
11
10
CHAPTER 2 SOFT SKILLS COURSES Course Title: Miracle Team Building Programme for Non-Management Duration: 1 Day Speaker: Karyn Williams Sykes and Adnan Butt, BIHR Training Overview: The course aimed at creating the culture of One United Team across Alba and comprised a short movie presentation along with a number of team building activities, which promoted team work, trust, appreciation, decision making, objective and goal setting. Course Title: Workshop on “High Impact Leadership” Duration: 1 day Speaker: Shaun Harper, reputed leadership trainer of international experience Overview: The course was based on the well-known book ‘Five Temptations of a CEO’, and featured video clips on motivational quotes and on temptations of leaders; role plays where delegates were randomly selected to play characters with an objective to ensure that participants understand basic principles in the book; questions and answers; and case studies and group exercises to reinforce understanding of the 5 temptations faced by a leader. The book was also distributed to the participants.
TIM’S BOOK CLUB A new initiative by the Executive Management of Alba, Tim’s Book Club has been established with the sole aim of developing a reading culture in Alba. The approach behind introducing this new facility for all Alba employees is that reading is one of the most fundamental skills required to succeed in life. Through this Club, employees will have access to well-known business/management books, which will help them enhance their skills and capabilities. Brining more value to the reading experience, books with the highest reading rate will be converted into workshops, thus giving insights about the author, the book and lessons from it. To assert the value of reading, Tim’s Book Club was integrated into the Training & Development Programme (TDP). Starting with Silver followed by Gold and Platinum levels, members of the Club will graduate to higher stages as they continue reading books. The different levels established are based upon higher learning and understanding of the various subjects.
13
12
CHAPTER 2 SAFETY, HEALTH & ENVIRONMENT TRAINING Developing its safety culture across the plant and achieving a zero accident work environment has remained Alba’s priority in the past year. This resoluteness translated into numerous training programmes in Safety, Health and Environment within 2015, which ensured that all employees were made aware on being responsible and safe in all aspects of their life. In 2015, among other standard SHE courses, various other topics are also being covered such as Accident Investigation, JSP and Planned Job Observation, Risk Assessment, Permit to Work, Working at Height, Be a leader in Safety and one week in house made movie festivals. Courses held covered both management and non-management employees, thus ensuring that every employee becomes an ambassador of safety.
CHAPTER 3 Development Programmes- The MBA and TDP As part of Alba’s education programme to develop its leadership, a total of 22 employees are pursuing their Masters in Business Administration (MBA) with 12 students in the ESSEC’s MBA Programme from French Arabian Business School Bahrain, 3 students in UK and 7 in United States. Some more will join very soon. The objective of the education programmes is the overall professional development of Bahraini leaders, which would enhance their knowledge, skills and leadership driving Alba towards excellence among other smelters around the world. Strengthening the quality of Bahrainisation at all levels is part of Training and Recruitment Department’s goal, and it is achieved via an intensive programme called TDP (Training Development Programme). Selected Bahraini employees with potential are identified and then trained to become future leaders who will replace expatriate managers. In addition to 2014 list, quest continued in 2015 also for talented and potential employees to be able to make them future Alba Managers. 98 employees are undergoing targeted TDP program for higher management positions presently.
15
14
CHAPTER 3 Development Programmes- The Apprentice Alba initiated the Apprentice Programme with the aim of identifying individuals who will meet company’s business goals and objectives and thereby, improve overall leadership skills of Alba employees. The first season of the Apprentice Programme for management employees kicked off in June 2014 with 10 participants being given various tasks and challenges over a period of 3 weeks. The selected candidates were divided into two teams, who then had to complete a set of tasks. A panel of judges headed by CEO Tim Murray and comprising executives and managers evaluated the candidates’ performance, and following a process of elimination, one successful winner was selected. In the second season of the Apprentice commenced in November 2014 and comprised non-supervisory level employees as the participants of the programme. The Apprentice Programme 2015 was kicked-off in April 2015 to identify talented individuals who can fulfil Alba’s business goals and objectives and thereby, enhance the leadership of the company. In this year’s edition, a team from non-supervisory employees challenged a team of supervisory employees. Participants gained a lot from their interaction, the different projects given and challenges faced. They will forever cherish this experience and lessons learnt.
License Issuance and Renewal Alba works with many types of heavy equipment and cranes, which are especially designed for a smelter. A license ensures that all operators are well trained and equipped with the skills to drive and operate the vehicles and cranes. Alba’s in-house facilities and experts provide the required training, mentoring and assessment to its operators. The SAP system provides all the records with respect to their general training, on–the-job training, assessment and licensing both for provisional and operational. This system allows the department to monitor and update their operator’s license, and provides a safe environment where operators are working safely for better efficiency and productivity
17
16
CHAPTER 3 Development Programmes - VT’s Alba’s Vocational Training scheme has been a vital part of the Company for over 25 years with regular intake of vocational trainees. The objective of this programme has been effective Bahrainisation of the non-supervisory maintenance manpower of Alba. The intake eligibility is a minimum of a technical National Diploma. The duration has been optimised to 2 years resulting in speeding up of the Bahrainisation process. After successfully completing the programme, the trainee enters the maintenance manpower with competence to work as skilled maintenance staff in the relevant discipline. The structure of the programme is modular. The duration of 2 years is divided into 8 phases wherein each phase comprises two parts -- offthe-job component in Training Centre and on-the-job component as plant attachment. In every phase, the on-the-job schedule is closely linked to the associated off-the-job training input. The trainees as well as the field mentors are able to be more objective because areas to be covered during every on-the-job training period are clearly defined. - Training Centre Input: - Plant Attachment:
42 weeks. 54 weeks.
The training areas focus specifically on the equipment and processes the trainees will be required to work on. In addition, the trainees are required to complete a project work during the programme enabling them to apply the theoretical knowledge onto original technical project with measurable results.
Chapter 4 Technical Courses
CHAPTER 4 TECHNICAL COURSES Course Title: Oxy-Acetylene Cutting Process Duration: 2 days Speaker: Sr. Mechanical Instructor, Asterio Pavia Overview: This course, designed to enable participants gain essential knowledge of gas cutting in the oxy-acetylene process, focused on providing skills and knowledge required to service, maintain, repair or fabricate within a metal work environment in order to improve productivity and quality within the workplace or improve the participant’s own skills. Outline: • Understanding the oxy-fuel cutting process • Prepare for the oxy-fuel cutting operation • Visual identification of cutting defects due to cutting torch manipulation, angle • Caring for and storing cutting equipment, tools. • Safe handling of oxy – acetylene
21
20
CHAPTER 4 TECHNICAL COURSES
Course Title: Advanced Gas Turbine Operations PowerStation 4 Duration: 3 Days Speaker: Sr. Instructor Power, T. Puranayya
Course Title: Advanced Gas Turbine Operations PowerStation 3 Duration: 3 Days Speaker: Sr. Instructor Power, T. Puranayya
Overview: This programme was designed for those who attended the 5-day course on Basic Gas Turbine Operations PS-4. The course covers vital aspects of operations in the Control Room and includes topics like operating principles, operation techniques during start up, normal and shut down instances and emergency situations and troubleshooting.
Overview: This programme was designed for those who attended the 3-day course on Basic Gas Turbine Operations PS-3. Its contents cover important aspects of gas turbine operations in the Control Room and include topics like operating principles, operation procedures for start-up and normal and shut down including emergency operations.
It aims at providing senior operators with important information on normal and emergency operations of gas turbine and associated equipment as well as procedures involving start-up and shutdown. The technical discussions, which include a number of aspects of gas turbine operation are helpful to the operators.
The programme aims to allow senior operators gain a deeper understanding of normal and emergency operations of gas turbine and associated equipment as well as procedures involving start-up and shutdown.
Outline: • Analysis of Gas turbine operations • Control and protection of gas turbines • Control and protection of generator • Reactive power and power factor
Outline: • Analysis of Gas turbine operations • Control and protection of gas turbines • Control and protection of generator • Reactive power and power factor
CHAPTER 4 TECHNICAL COURSES Course Title: Virtual Machine (VM) ware Training Duration: 5 days Speaker: Samesh Dhankar, Training Plus Institute, Bahrain Overview: Power Station 4’s highly efficient 930 MW dual-fired combined cycle plant has one of the largest HMI (Human Machine Interface) system from ABB called OpIT. This has been upgraded to state-of-the-art ABB 800xA system for communicating with Advant Master, combined with Power Generation Information Manager (PGIM), which is based on Virtualization platform. All new Human Machine Interface (HMI) servers are on VMWare ESXi 5.1 server technology to operate the combined cycle power plant for the first time in the Middle East and third in the world. Each VM (Virtualization machines) host is replacing four physical computers and in total, both block 5 and block 6 are installed with 4 VM hosts in redundant configuration connecting all new 25 clients. The course defined and described the need for Data Center Virtualization, and provided an overview of the features of vSphere 5.5. It also defined how VMware’s products help solve business and technical challenges with regards to Data Center Virtualization. Outline: • Module 1: Introduction to Data Center Virtualization with VMware vSphere – Overview & Examples. • Module 2: Components of VMware vSphere. • Module 3: Participants apply what is learnt about Data Center Virtualization to overcome availability, scalability, optimization and management challenges encountered by sample companies.
23
22
CHAPTER 4 TECHNICAL COURSES
Course Title: Maintenance of Rotating Equipment Duration: 3 days Speaker: Sr. Mechanical Instructor, Asterio Pavia
Course Title: General Electric (GE) Remote Terminal Unit (RTU) Training Duration: 5 days Speaker: Dawood, JAL International, Saudi Arabia
Overview: The course gave attendees an understanding of the process of shaft alignment by application of the method as well as a detailed exposure to key factors in the production of a good shaft alignment result. The attendees were also taken through a bearing selection process for the shaft previously designed and trained on how the original design choices affects the use and care of the bearing and equipment throughout its operating life.
Overview: GE RTUs are used in the Power Plant to monitor the HT Power Distribution and the XA/21 SCADA software is used for control and monitoring. A total of 11 RTUs and BCUs (Bay Control Unit) are being used for PS-1 to PS-4 and for Gas Compressors connected to 8 nos. Oracle servers through Fibre optic network (Ethernet) for the Data Acquisition, trending, alarms and events.
Outline: • Anti-friction bearings and plain bearings, and the uses and limitations of each • Bearing lubrication and selection • Bearing housings and construction • Effects of shaft misalignment • Standards and limits for alignment • Methods of precision shaft alignment
This course provides hands-on training for the participants. Outline: • Detailed explanation on the D20 Hardware, troubleshooting and maintenance • Detailed explanation on D20 RTU functions • Detailed explanation on D20 RTU to SCADA system communication • RTU Configuration using Configpro version 5 • Practical training on the configuration and maintenance
CHAPTER 4 TECHNICAL COURSES Course Title: ECM (CM 850) Familiarization Duration: 2 Days Speaker: Sr. Instructor Automobile, Danilo A. Perez Overview: The course enables participants to get familiarised with the Cummin’s Electronic Control Module (ECM – CM850) design, components and operations. It also provides trainees with the required skills and knowledge to conduct minor trouble shooting activities on Cummins Engine Electronic system. Outline: • Review on Cummins QSB 4.5/6.7 Familiarization and Maintenance • ECM (CM 850) Design Concepts • Input Devices: Sensors and Switches • Output Devices: Fuel Injector Solenoid • Testing the Electrical Equipment
25
24
CHAPTER 4 TECHNICAL COURSES
Course Title: Basic Units, Measurement & Calculations Duration: 5 days Speaker: Mahmood, NIIT, Bahrain
Course Title: Hydraulics Proportional Valve Card Adjustment Duration: 2 days Speaker: Sr. Instructor Hydraulic & Pneumatics, Kamal K Jan
Overview: The course was designed for Operators and Maintenance Fitters in order to help them further develop and strengthen their overall knowledge and performance.
Overview: This was a specially designed course on proportional valves and amplifier card fine-tuning of Casthouse 2 & 3 equipment. The technical details and fine-tuning procedures are helpful to the maintenance personnel and various practices, live demonstration is done in the plant.
Outline: • Introduction to Units in Measurement • Basic Formulas • Basic Electricity • Basic Scientific Measurements • Basic Mechanics • Basic Constants
Outline: • Introduction to Proportional & Servo Hydraulics • Proportional Valves: Design and mode of Operation • Proportional valves: Characteristic Curves and Parameters • Amplifier and set Point Value Specification • Switching examples using Proportional Valves
CHAPTER 4 TECHNICAL COURSES Course Title: HERZOG M/C PLC (SIEMENS – S7) Duration: 4 days Speaker: Sr. Instructor Instrumentation, Venkata Murty Overview This course is for instrument maintenance personnel of CH to enable them install every component and module, including wiring in a Herzog Siemens S7 PLC system, and be able to program the processor for any situation and requirement in the plant, including trouble shooting problems by accessing software. Outline: • S7 – Family S7 – Software • Create New Project • Herzog PLC - Hardware • Connecting to PLC • Uploading / Downloading • Memory Addressing • Blocks Structure • Basic Instructions • Documentation
27
26
CHAPTER 4 TECHNICAL COURSES
Course Title: Casthouse Burner Management System Duration: 2 days Speaker: Sr. Instructor Instrumentation, Venkata Murty
Course Title: Reduction Emission Monitoring Systems Duration: 2 days Speaker: Sr. Instructor Instrumentation, Venkata Murty
Overview: Especially beneficial for new trainees and CH Instrument personnel, the course provided an introduction as well as a detailed description on Casthouse Burner System.
Overview: This course was designed to provide an introduction and detailed description of HF and Dust analysers used in Reduction Lines and Stack. This course was especially useful for the new trainees and Reduction Lines personnel.
Outline: • Introduction to CH Furnaces • Safety while working with Gas Burners • Introduction to Burner system Interlocks • Start-up & Shut down Sequence • Burner Controller & flame supervision • Adjustment of Gas/Air Ratio • Troubleshooting • PLC Program
Outline: • Introduction to Gas Analysers • Introduction to Principle of Analysis (LASER) • Different Types of sensors used • Hardware & System Components • Calibration of the analyser
CHAPTER 4 TECHNICAL COURSES Course Title: EOT Crane Electrical Controls & Brake Duration: 2 Days Speaker: Sr. Electrical Instructor, Ravi Overview: This course - designed for all electrical and instrument skilled fitters, technicians, supervisors working in Maintenance section - provides knowledge and skills required to maintain Electrical equipment and controls of Electrical Overhead Travelling cranes in safe operational condition. It familirizes trainees on crane controls, brakes, various modes of operation, various safety devices and protections used in cranes. Outline: • Different types/makes of EOT cranes in Alba • Crane Terminology & Specification • Crane current collecting system • Understand the various modes of operation • Crane duty motors and speed control • Different types of electrical braking system • Understand the various electrical control requirement • Study of power & control schematic diagram • Study of PLC programs • Understand the various safety devices. • Crane Interlocks / Alarms & Protections • Plant visit • Maintenance and Troubleshooting
29
28
CHAPTER 4 TECHNICAL COURSES
Course Title: Line 4 Dual Pot-Control System Maintenance Duration: 2 days Speaker: Marcin Puchalski, Rio Tinto Alcan, RTA Alesa Ltd.
Course Title: Cummins Engine Fundamentals QSB 4.5 / 6.7 Duration: 2 Days Speaker: Sr. Instructor Automobile, Danilo A. Perez
Overview: This course is designed for instrument maintenance personnel to get familiar with the basic operations, troubleshooting and fault finding on the new Dual pot Micro of Reduction Line 4.
Overview: The course enables participants to familiarise themselves with the Cummin’s Diesel Engine System design, construction and operations. It also provides trainees with the required skills and knowledge to conduct proper preventive maintenance activities on the Cummins engine.
Outline: • Introduction of process and explain setting of process parameters • Guidelines of DC Hazard inside Pot Room & Super Structure • Explain Micro Pot Function (Site Visit) • Explain Block Diagram on Micro Pot • Explain Functions of Keyboard and how to test it • Explain Functions of Boards and Method of Testing • Communication Theory and Micro pots Communication • Network Communication (Visit Automation Site) • Normal Problems encountered in Micro pots & their Solution • Significance of Various Alarms Generated and Action to be taken
Outline: • Review diesel engine’s theory of operation • Construction and application of Cummin’s Diesel engines • Major operating systems of Cummin’s Diesel engines • Air, Fuel, Lubrication and Cooling System • Conducting Cummin’s Maintenance
CHAPTER 4 TECHNICAL COURSES Course Title: Casthouse Screw Compressor & Air Dryer Duration: 1 day Speaker: Sr. Instructor Hydraulics & Pneumantics, Kamal K Jan Overview: This course enables participants to familiarise themselves with the operation and systematic procedure for servicing, overhauling, troubleshooting and failure analysis of screw compressor and air dryer units. It also provides the trainees with extensive skills and knowledge to eliminate the problems and failures. Moreover, It provides them with case studies. Outline: • Basic Principles of operation • Replacement of parts • Lubrication system/Bearing Maintenance • Gear Units • Servicing & Overhauling
31
30
CHAPTER 4 TECHNICAL COURSES
Course Title: Micro Motion – Mass Flow Meter Duration: 2 days Speaker: Sr. Instructor Instrumentation, Venkata Murty
Course Title: Fuel Injection (Common Rail) System Duration: 1 Day Speaker: Sr. Instructor Automobile, Danilo A. Perez
Overview: This course is designed to assist instrumentation maintenance personnel to understand the principle of Mass flow measurement and working of Micro-motion mass flow meter used in Carbon and Casthouse. The attendees were given information on the procedures for calibration, characterisation and parameterisations of the flow meter.
Overview: This course enables participants to familiarize with the Cummin’s Fuel Injection System, its design, construction and operations. It also provides trainees with the required skills and knowledge to conduct proper maintenance procedures on the fuel system and troubleshooting on engine failures due to the fuel system.
Outline: • Principles of Mass Flow • Coriolis principle • Features of Micromotion F series • Procedure for Calibration • Procedure for Characterization • Parameters of Micro –motion • Communication with HART HHT • Connection & Communication with PC • Troubleshooting using PC based software
Outline: • Review on Fundamentals of Fuel Injection System • Advantages of the Common Rail System • Components Overview • High Pressure Pump and Transfer Pump • Fuel Metering Control Valve • Common Rail • Fuel Injectors • Discussion on Engine Problems related to Fuel Injection System
CHAPTER 4 TECHNICAL COURSES Course Title: Aluminium Production Technology Duration: 3 Days Speaker: Halvor Kvande, Renowned Professor from Norway for Aluminium Technology Overview: Held in coordination with Gulf Aluminium Council (GAC), this training enables trainees get familiarized on global updates from a renowned consultant, who is famous for his research work on the process of primary production of aluminium and gain updates in this field as well as participate in practical exercises training. Outline: • Hall – Heroult Process & Prebaked Anodes • Heat Balance in Aluminium Electrolysis Cells • Work Practices and Cell Operation • Bath Compositions and Properties in the cell • Current Efficiency & Energy Consumption • Alumina and its properties & Feeding Technology • Amperage Increase Projects • Modernization of Prebake Cells
33
32
CHAPTER 4 TECHNICAL COURSES
Course Title: SOLIOS GTC / FTC Technology & Control System Duration: 2 Days Speaker: Jeremy Neveu, Solios, USA
Course Title: ALPSYS Dual Pot control system on Reduction Lines Duration: 8 days, Speaker: Bernard Molinier, Rio Tinto Alcan Operation Specialist
Overview: The training on Reduction Gas Treatment Technology is in line with Alba’s management initiative to use the resources of original equipment manufacturers and technology providers for providing important technological know-how on GTC / FTC Technology & Control System defects simulation and troubleshooting, technical consultancy and training to our Reduction Lines GTC / Carbon FTC operation staff.
Overview: The training on Reduction Technology is in line with Alba’s management initiative to use the resources of original equipment manufacturers and technology providers for providing important technological know-how on ALPSYS Dual Pot Control system, technical consultancy and training to our staff. Alba has taken particular interest in this endeavour since last three years and rich dividends are already visible in terms of improved knowledge and competency of our operating staff.
Course Outline: • Fume Collectors • Dry Scrubbers & its Modules • Alumina Handling, distribution and storage • Fans & Blowers and Water cooling systems • Emergency Bypass & Assessment Test • Routines Inspection • Defect Simulation
Course Outline: • In depth knowledge of Pot Process Control • Pot Alumina feeding Control • Thermal Regulation & Control • Thorough understanding of Level-2 Reports & Status • Usage of New Dual Pot Micro • in operation
CHAPTER 4 TECHNICAL COURSES Course Title:Induction Furnace Control and Maintenance Duration: 3 days Speaker: Sr. Electrical Instructor, Ravi Overview: This course aims to provide electrical &instrument skilled fitters, technicians, supervisors and engineers working in Carbon Rodding plant and cathode sealing E & I Maintenance section with knowledge and skills required to maintain Induction Furnace in safe operational condition. This course familiarises trainees on Furnace controls, Furnace coil Insulation Monitoring, rebuilding of coil insulations and reassembling of furnace including Furnace cooling system and different protections Outline: • Working principle of Induction Furnace • Different types / makes of Induction Furnace used in Alba • Study of power & control schematic diagram • Converter, Inverter &Melt Manager controls • Furnace Earth leakage monitoring • Cooling system • Furnace Interlocks / Alarms & Protections • Rebuilding of Coil insulation & Furnace assembly • High voltage & Furnace operational safety • Plant visit • Maintenance and Trouble shooting
35
34
CHAPTER 4 TECHNICAL COURSES
Course Title: LV MCC Maintenance Course Duration: 5 Days Speaker: Schneider Electric UAE - Dr. Nabil & Krishnan Overview: This course, which was delivered in collaboration with Alba Training, was held for Electrical Maintenance staff as an initiative towards improving their overall knowledge and skills to carry out safe maintenance of Motor Control Centres (MCCs) in the plant. Outline: • Better personal confidence in approach to working safely with power switchgear • Understanding “competence” and Safety & Health at work • Awareness of the fault level and fault currents within equipment • Detailed understanding of the various interrupting mediums, air, vacuum and SF6 • Understanding protection, isolation and switching • Understanding the following types of faults: Over current, Short circuit, Ground fault, and Arc Fault • Appreciating the differences between earthing and bonding. • Understanding the need to carry out appropriate maintenance, inspection, test & certification of installations, equipment and appliances • Familiarise with the different types of MCCs at Alba
Course Title: Rockwell: Maintaining and Troubleshooting a Device Network Duration: 5 Days Speaker: Sr. Electrical Instructor, Ravi Overview This course prepares participants, who are mainly technicians, supervisors and engineers from electrical and instrumentation field to return a malfunctioning Device Net network to normal using RS Networx for Device Net software operation and complete basic hardware and software maintenance tasks with minimum downtime. Outline: • Identifying Device Net Network Components • Maintaining and Troubleshooting a DeviceNet Cable system • Maintaining and Troubleshooting a DeviceNet Power Supply • Connect / Add / Replace Device to a DeviceNet Network • Troubleshooting a DeviceNet Network • using RSNetworx for DeviceNet Software • using Hardware indicators • using RSLogix 5000 Software • Troubleshooting duplicate nodes on a DeviceNet Network • Macros, Symbols and Security • RSView SE Client and SE Administration Console
Chapter 5 Training Workshops
CHAPTER 5 Training Workshops- Then and Now
Before
39
After
38
CHAPTER 5 Training Workshops- Then and Now
Built in the early 1970’s, Alba’s Training Centre had an administration office and training was imparted at different areas around the plant. Within the next few years, the centre owned the training administration block with few class rooms and offices, and then, four workshops were built for conducting technical programmes and equipment training. Technical training revolved around basic skills in mechanical, electrical, welding and automotive trades. The trainees were imparted with skills to enable them to work as fitters in maintenance functions. Over the years more equipment was received from plant areas; maintenance training now focused equally on theory and practical skills. The new training workshop, built in 2015 near the Training and Recruitment building, is bringing about a radical change in the methods of technical training. There are five workshops dedicated to each of the five maintenance disciplines - Automotive, Mechanical, Electrical, Instrumentation and Hydraulic & Pneumatic – and comprise state of the art equipment, simulators, workbenches and cranes. Every trainee gets a spacious work area for carrying out his practical activity, thus improving safety during training. The workshop area is centrally air conditioned and has a well-designed lighting. Each workshop is also provided with a separate store to house the tools and spares used during training. The theoretical training will take place in the nine Smart Classrooms with networked computers, projectors and tablets. The trainees will also have the benefit of an amenity facility with locker rooms, dining hall and prayer room.
For any large organisation with high reputation it is vital to have training facilities which would help prepare its employees for high standard skills and techniques to run different processes and maintain sophisticated machines and equipment. Since Alba started 1971, the company had this advantage. A unique working environment coupled with hazards and risks posed continuous challenges to the Alba management, which had to then modify and improve the existing facilities. At Training and Recruitment Workshops there are various sections and equipment to meet maximum need of the smelter: • Instrumentation Workshop • Automotive Workshop • Mechanical Workshop • Electrical Workshop • Hydraulic & Pneumatic Workshop
CHAPTER 5 Instrumentation Workshop PRESSURE CONTROL TRAINER This trainer assists the trainee to understand pressure principles, regulation and control, usage of pressure relief valves and pressure control valves
MICROMOTION FLOW TRANSMITTER This special instrument is used in Carbon for measuring liquid pitch flow accurately. The principle of measurement is unique and the same principle is also used in Casthouse 3 for Billet casting speed control, in Carbon 3 for liquid pitch control and in Calciner for CO2 dosing control.
WEIGHING SIMULATION PROJECT This project developed by Alba VTs team aids in training Load cell and weighing principles, measurement, diagnose problems associated with weighing systems and calibration of the same.
MIXER SIMULATION PROJECT This project developed by Alba VTs using PLC-5 assists the trainees to understand the usage of various types of controls like pneumatic motors, photo sensors, load cells, solenoids, level sensors, etc.
41
40
CHAPTER 5 Instrumentation Workshop
INSTRUMENT CALIBRATION BENCH -1 This calibration Bench is based on Beamex MC5P host module and is equipped with other necessary modules to calibrate any type of Pressure transmitters and temperature transmitters.
INSTRUMENT CALIBRATION BENCH -2 Similar to Bench-1, this calibration Bench is based on Beamex MC5P host module and is equipped with other necessary modules to calibrate any type of Pressure transmitters and temperature transmitters.
INSTRUMENT CALIBRATION BENCH -3 This calibration Bench is a multipurpose calibration and testing Bench for instruments other than pressure & temperature. This also features a temperature controlled Soldering Station.
INDUSTRIAL VALVES TRAINER -1 & 2 Cut–away models of different types of valves are provided for better understanding of function of various valves and their inner parts for maintenance and replacement.
CHAPTER 5 Instrumentation Workshop SLC Trainer Simulator for training participants on existing SLC 500 controls. Input/ output simulator is provided to simulate both analog & digital signals for testing small programs.
AUTOMATIC ASSEMBLY TRAINER This automatic assembly plant simulator has two parts, one plastic and another metallic are sorted separately and the assembled together. If any part of the assembly is missing, it is detected and automatically rejects the part. Instructor can simulate faults on the field side, enabling trainees to learn troubleshooting and find the faulty sensor / device and replace the same in a running plant environment.
43
42
CHAPTER 5 Instrumentation Workshop
DISTILLED WATER PRODUCTION PROJECT This project designed and developed by Alba VTs helps trainees understand heat exchange principles by producing steam using PLC digital controls with level sensors and also usage of remote Input / Outputs.
TANK WATER LEVEL CONTROL PROJECT This project designed and developed by Alba VTs empowers trainees with understanding of process control using PLC PID (Proportional, Integral & Derivative) and also helps them to understand practically about level measurement, flow measurement, pressure measurements.
PLC CLASS ROOM PLC-5 TRAINER & I/O SIMULATOR Two nos. simulators for training participants on existing PLC-5 controls in Carbon & Reduction plants. Input/output simulator is provided to simulate both analog & digital signals for testing small programs.
CHAPTER 5 Automotive Workshop Drilling Machine A drilling machine (also known as drill press, pedestal pillar drill, or bench drill press) is a fixed type drilling machine to open, enlarge and to finish holes by drilling, reaming, boring, counter boring, counter sinking, and tapping.
Parts Washer The Parts Washer is a recirculating machine used for cleaning / degreasing parts or components. It is equipped with a pump that recirculates the cleaning solutions and a brush that helps to remove stubborn greases.
Engine (Cummins QSB 4.6) Cut Away Assembly This assembly is to be used to train participants on familiarising themselves on the Cummins QSB 4.6 Engine. The cut away construction of the engine can allow them to appreciate the operations of the engine and identify the different parts and components.
Differential (Kessler) Assembly This assembly is to be used to train participants on familiarising themselves on the Automotive Differential Assembly. The Kessler Differential is used in almost all of Alba heavy industrial vehicles. The training module will include disassembly, parts familiarisation and inspection, differential operating principles and assembling procedure.
45
44
CHAPTER 5 Automotive Workshop
Hydraulic System Fundamentals Trainer and Hydraulic Valves Components The Hydraulic System Fundamentals Trainer teaches on the basic principles of hydraulics and familiarization on the operations of hydraulic system. Through the use of different hydraulic valves and actuators, we are able to design and construct intended hydraulic system operations. This would allow that participants to work through a hydraulic circuit drawings. Hydraulic Valves Trainer The Hydraulic Valves Trainer teaches on the design principles and operations of hydraulic control valves (such as directional control valves, flow control valves and pressure control valves). It is equipped with a transparent model of the valves to show the internal components of the valves and the flow of fluids in the hydraulic components. Electro- Hydraulic Excavator Simulator The Electro- Hydraulic Excavator Simulator teaches the operating principles of the hydraulic system of an excavator. Training would start on the manual operations of the machine moving towards solenoid operations wherein relay logics are being utilized. Finally working with advanced hydraulics that deals already with a programming logic controls (PLC).
Engine Exhaust Emission Analyzer The Bosch Emission Analyzer 850 is equipped to meet all current and known future requirements of exhaust gas analysis on petrol and diesel engine vehicles. This would help in enabling complete vehicle system analysis for advanced fault diagnosis. This equipment is installed on the exhaust system of an engine wherein the outgoing gas is analysed
CHAPTER 5 Automotive Workshop Hydraulic Variable Piston Pump Cut Away Project The Hydraulic Variable Piston Pump is a mechanical device that converts mechanical energy to fluid power energy. This component is to be used to train participants on familiarising themselves with the Hydraulic Variable Piston Pump. The cut away construction of the Hydraulic Variable Piston Pump can allow the participants to appreciate its design construction, operations and identify the different parts. Common Rail System Project The Common Rail System is one of the fuel delivery system of an engine. This component is to be used to train participants on familiarising themselves with the Common Rail Fuel Injection System. The cut away construction of the Common Rail High Pressure Pump can allow the participants to appreciate the design construction, operations and identify the different parts.
Auto PLC (Compact Logix) Trainer A number of our heavy vehicles workon a PLC system (Compactlogix by Allen Bradley). This component is to be used to train participants on familiarising themselves with the Compactlogix System, its hardware and wirings. This will also be used for training uploading and downloading programs, as well as rewriting programs.
Lifting Tackles This is a display stand is to be used in conducting training on Overhead Crane (lifting tackles). The training will cover the different types of lifting tackles, its proper inspection and correct usage (rigging). This will also provide samples of lifting tackle failures and rejects.
47
46
CHAPTER 5 Automotive Workshop
Hydraulic Cylinder Cut Away Project This component is to be used to train participants on familiarising themselves on the Hydraulic Cylinder. The cut away construction of the Hydraulic Cylinder can allow them to appreciate the operations of the different parts and seals used.
Starter Cut Away Project A Starter is used to initially start an engine. This component is to be used to train participants on familiarising themselves with the engine starter motor. The cut away construction of the starter can allow the participants to appreciate its design operations and identify the different parts.
Alternator Cut Away Project An Alternator is used to charge the automotive batteries and to supply the required electrical power on the vehicle. This component is to be used to train participants on familiarising themselves with the engine alternator. The cut away construction of the alternator can allow the participants to appreciate its design construction, operations and identify the different parts.
Turbo Charger Cut Away Project The Turbo Charger is used to increase the power of the engine utilizing the exhaust system to run a compressor that will increase the volume of air to the engine. This component is to be used to train participants on familiarising themselves with the Turbo Charger Component of an Engine. The cut away construction of the Turbo Charger can allow the participants to appreciate its design construction, operations and identify the different parts.
CHAPTER 5 Mechanical Workshop Lathe Machine The lathe is a machine tool used principally for shaping articles of metal (and sometimes wood or other materials) by causing the work piece to be held and rotated by the lathe while a tool bit is advanced into the work causing the cutting action.
Milling Machine The milling machine removes metal with a revolving cutting tool called a milling cutter. With various attachments, milling machines can be used for boring, slotting, circular milling dividing, and drilling. This machine can also be used for cutting keyways, racks and gears and for fluting taps and reamers.
Radial Drilling Machine A drilling machine to open, enlarge and to finish holes by drilling, reaming, boring, counter boring, counter sinking, and tapping. Because of its angular and radial movement, it is able to cover the entire working surface of the entire table and its precints, a property which renders this machine much more versatile than the upright type of drilling machine with its fixed spindle.
Drilling Machine A drilling machine (also known as drill press, pedestal pillar drill, or bench drill press) is a fixed type drilling machine to open, enlarge and finish holes by drilling, reaming, boring, counter boring, counter sinking, and tapping.
49
48
CHAPTER 5 Mechanical Workshop
Combined Mechanical Trainer 1 (Coupling/Shaft Alignment) This mechanical training equipment combines the mechanical maintenance training in one hands-on workstation relating to Couplings Drives, and Shaft Alignment.
Combined Mechanical Trainer 2 (Belt & Chain Drive) This mechanical training equipment combines the mechanical maintenance training in one hands-on workstation relating to Belt & Chain Drives.
Combined Mechanical Trainer 3 (Pump Maintenance/Gear Drives & Shaft Alignment) This mechanical training equipment combines the mechanical maintenance training in one hands-on workstation relating to Pump Maintenance, Gear Drives, and Shaft Alignment. Bearing Maintenance This mechanical training equipment combines the mechanical maintenance training in one hands-on workstation relating to Care & Maintenance of Bearings. Arc Welding Simulator The welding simulator teaches welding without the use of base material, shielding gas, welding electrodes as well as other supplies and consumables. The system also does not require weld fume removal. Other costs that can be reduced through the use of virtual reality welding are electrical consumption, scrap and waste. System includes software and modem for connection to PC for results.
CHAPTER 5 Electrical Workshop Electrical Lab Bench-1 This is a modular and multipurpose electrical work station for service/repair, troubleshooting and testing of electrical and electronic components and devices. Includes all voltage supplies and measuring devices typically required for testing purpose.
Electrical Lab Bench-2 This is a modular and multipurpose electrical work station for testing protection relays through secondary injection and a current leakage tester for all electrical appliances.
Electrical Lab Bench-3 This is a modular and multipurpose electrical work station for service/repair, troubleshooting and testing of electrical and electronic components and devices. Includes Hi-pot tester for transformers and models.
A.C. Motor Trainer In this trainer, motor wiring is accomplished through banana jack receptacles on the control enclosure’s front panel face. This unit equipped with an appropriate voltmeter and ammeter to monitor the motor voltage and load current. Four instructor fault insertion switches are provided on motor module. An optional motor loading module attaches to motor unit using a flexible coupling provided with the loading module.
51
50
CHAPTER 5 Mechanical Workshop
Pedestal Grinder A pedestal grinder is a larger version of a bench grinder that is mounted on a pedestal, which is bolted to the floor. These types of grinders are commonly used to hand grind cutting tools and perform other rough grinding. Depending on the grade of the grinding wheel it may be used for sharpening cutting tools such as lathe tools or drill bits. Alternatively it may be used to roughly shape metal prior to welding or fitting.
Lapping Table Is a machining process, in which two surfaces are rubbed together with an abrasive between them, by hand movement or using a machine to obtain surface flatness and surface roughness. Though flatness is the most common goal of lapping, the process is also used to obtain other configurations such as a concave or convex surface.
Lay-out Table Is a bench table, with a smooth and flat surface where a work piece is to be laid out in order to establish a reference lines or planes, to outline the surfaces that are to be machined or to locate the position of the holes to be drilled, etc.
Hydraulic Bench Press A Hydraulic Press, is a device using a hydraulic cylinder to generate a compressive force. These presses use the pressure generated by the pistons and the hydraulic fluids to assemble and maintain the parts or components of an equipment.
CHAPTER 5 Electrical Workshop Motor Manager Trainer- MM120 This Trainer developed by Alba VTs is designed to provide in-depth knowledge of Motor Manager Operation and Maintenance with respect to different protections and its immunity towards various transients and harmonics with a view to enhance availability, reliability and safety of the plant equipment.
Motor Manager Trainer- MMII This Trainer developed by Alba VTs is is designed to provide in-depth knowledge of the Motor Manager II (MMII) In one package combines control functions and comprehensive motor protection, providing sophisticated control and protective relaying of LV Motors.
VFD – Altivar 66 Trainer This Project developed by Alba VTs. A Variable Frequency Drive (VFD) is a type of motor controller that drives an electric motor by varying the frequency and voltage supplied to the electric motor. Other names for a VFD are variable speed drive, adjustable speed drive, adjustable frequency drive, and inverter.
VFD – Altivar71 Trainer This trainer is designed to provide in-depth knowledge of Schneider make Altivar 71 AC Motor Speed Controller. The Course should enable the participants to get familiarsed with hardware as well as software of Altivar-71, including troubleshooting & fault management.
53
52
CHAPTER 5 Electrical Workshop
Motor Control Trainer A system of task-specific, motor-related training devices allowing for training in the operational principles, wiring, fault troubleshooting and application of industrial motor control devices. All wiring is accomplished through banana-jack connections on the front panel face, rather than directly to individual components. Four fault switches for creating common component faults are provided.
Electrical Control Circuit Troubleshooting Trainer This Trainer allows for in-depth hands-on training in industrial motor control wiring, operation and troubleshooting. This device, provided with a comprehensive student manual, creates a complete, self-paced learning system. Performancebased testing is provided through the use of 80 fault creation switches and a built in testing timer. The student’s proficiency is established by the number of faults covered within a given period of time. Industrial Sensor Trainer A comprehensive training system allowing for training in the design, application and control of commonly used industrial sensors. The device can be used in conjunction with optional sensor packages, and related automation equipment. The training aid can be outfitted with a variety of photoelectric sensors and proximity sensorsup on which the sensors can be mounted. Control is performed though an on-board, “smart relay” controller. Electrical Generation Fundamentals Trainer A training simulator designed to demonstrate the principles of electrical power generation. The device illustrates the relationships that an operator must master in order to confidently operate modern generating equipment. This includes the paralleling of generators, and connecting to a larger power grid.
CHAPTER 5 Electrical Workshop AC Induction Motor Load test Trainer By conducting the load test on three phase induction motor, the performance of the motor viz. slip, power factor, input, efficiency etc. at various loads can be studied.
Automation Project - Anode Conveyor: This Project developed by Alba VTs. This project deals with real work simulation scenario similar to one in Carbon department Paste plant. It consists of 2 conveyors and a cooling control system. First conveyor is the Anode Cooling and Transporting Conveyor. At the end of the cooling conveyor, a crane picks the anode and transports it to the second conveyor which is the sorting conveyor according to anode size. The complete sequence of operation is the integration of automation by PLC5 control with Panel view HMI , and Variable frequency drives for motor speed control.
Drivers / Automation Class Room Control Logix simulator – 4 Nos. This Control Logix workstation is intended for trainees who want to practise those job tasks that are frequently performed on the plant floor. The workstation is designed to be used as an aid for strengthening and maintaining skill sets and is equipped with latest controllers from Rockwell automation.
55
54
CHAPTER 5 Electrical Workshop
Soft Starter Trainer A motor soft starter is a device used with AC electrical motors. The soft starter makes use of the fact that when the motor voltage is low during start of the motor, the starting current and starting torque is also low. This reduces the mechanical stress on the motor and shaft, as well as the electro dynamic stresses on the attached power cables and electrical distribution network, extending the lifespan of the system.
AC Slip ring Induction Motor Trainer Slip ring or Wound rotor motors are usually started with full line voltage applied across its terminals. As these motors have external resistance connected to its rotor circuit, the value of starting current is adjusted or kept minimum, by increasing the resistance of the rotor circuit. This external resistance, connected in star, thus kept at maximum when the motor starts and gradually cut-out as the motor gathers speed. Slip Ring Induction Motors that increasing the rotor resistance, not only reduces the rotor current, but the stator current too. This implies that the starting current of the motor is reduced when an external resistance is added in the rotor circuit
AC Induction Motor Star/Delta Starter Trainer The star delta starting is a very common type of starter and extensively used, compared to the other types of the starters. This method uses reduced supply voltage in starting. The method achieved low starting current by first connecting the stator winding in star configuration, and thenafter the motor reaches a certain speed, throw switching contactor changes the winding arrangements from star to delta configuration. By connecting the stator windings, first in star and then in delta, the line current drawn by the motor at starting is reduced to one-third as compared to starting current with the windings connected in delta.
CHAPTER 5 Hydraulic & Pneumatic Workshop Hydraulic Trainer 1 & 2 and Valve Stands The Hydraulic Trainer teaches on the basic principles of hydraulics and familiarization on the operations of hydraulic system. Through the use of different hydraulic valves and actuators, we are able to design and construct intended hydraulic system operations. This would allow the participants to work through a hydraulic circuit diagram. Students learn about: Principles of Hydraulics, Basic symbols, Functional symbols, Hydraulic pumps and motors, cylinders, accumulators, Directional control valves, servo valves, pressure control valves, flow control valves measuring devices and indicators, Open and closed loop control of energy.
Pneumatic Trainer 1, 2, & 3 The Pneumatic Trainer teaches on the basic principles of Pneumatics and familiarization on the operations of Pneumatic system. Through the use of different Pneumatic valves and actuators, we are able to design and construct intended pneumatic system operations. This would allow that participants to work through a pneumatic circuit diagram. Students learn about: Principles of Pneumatics, Basic symbols, Functional symbols, motors, cylinders, Directional control valves, pressure control valves, flow control valves, measuring devices and indicators, Open and closed loop control of energy.
57
56
CHAPTER 5 Electrical Workshop
Remote I/O / Network Simulator – 3Nos This workstation simulates connections between industrial devices like sensors, actuators, Remote digital & analog I/Os and higher-level devices, including Control Logix controllers and computers. Using the Control and Information Protocol standard, this workstation makes it easy to practice control, configuration, and data-collection processes for industrial devices.
VFD Power Flex700 Simulator – 3 Nos. With the VFD Power Flex700 simulator participants will learn how to recognise Power Flex standard control drive hardware and properly wire the drive, Also they will learn to diagnose specific load related, environmental, and equipment faults. Introduces techniques and instructions that will assist the participants in successfully configuring and starting up a Power flex 700 Ac drive using LCD HMI Drive Explorer software or Drive executive software.
Panel View plus Trainer - 6 Nos. This Panel View Plus Trainer is designed to provide in-depth knowledge and hands-on practice on operator interface terminal (HMI). Panel View plus with Rockwell R.S. View ME software enable the participants to design, modify, test application files and troubleshooting. PLC programming options are also covered.
58
CHAPTER 5 Hydraulic & Pneumatic Workshop
Industrial Sensor Trainer 1 & 2 This Sensor training equipment teaches on the operating principles of inductive, capacitive, ultrasonic, and photoelectric sensors and describe differences and similarities. Students learn and describe advantages, disadvantages, and applications of limit switches, photoelectric sensors, inductive sensors, capacitive sensors, and ultrasonic sensors.
Cut-away for Hydraulics & Pneumatics Components This cut-away view for the hydraulics and pneumatics components teaches the students to identify the inner parts of the components, and pilot lines for easy understanding of the functions what happens exactly during the operation. They could also visualize the running checks and maintenance point of view.
60
Looking Ahead
Alba’s Training & Recruitment Department constantly endeavours to provide our employees with a compressive range of new training programmes as well as opportunities for development and education that will enable all levels of Alba layers to be the best in their profession and in personal life. We intend to provide employees with the required tools and skills, which will empower them to stretch their capabilities and aim for opportunities that will create a bright future.
Aluminium Bahrain B.S.C. P.O. Box 570 Kingdom of Bahrain Tel: +973 17 830000 Fax: +973 17 919001 albasmelter.com
