Overview
Full Cone Spray Nozzles Table of Contents
Our full cone nozzles are available in several styles. Standard Nozzles: Traditional threaded nozzles made of metal and, in some cases, Kynar® or polypropylene.
Standard Spray
Quick-Connect Nozzles: Consisting of a nozzle body and spray tip, quick-connect nozzles can reduce maintenance time and lower costs. The spray tips can be removed for cleaning and/or replacement while the nozzle body remains on the pipe or spray header. We offer two lines of quick-connect nozzles:
Quick FullJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B10
FullJet Spray Nozzles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B3 ProMax Quick FullJet Spray Nozzles. . . . . . . . . . . . . . . . . . . . . . . . B10 UniJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B14 Wide Angle Spray
• QuickJet® Nozzles: – A quick 1/4 turn of the wrist removes spray tips without tools.
FullJet Spray Nozzles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B17
– Integral seal that remains attached to the spray tip to prevent accidental misplacement.
Quick FullJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B21 ProMax Quick FullJet Spray Nozzles. . . . . . . . . . . . . . . . . . . . . . . . B21
– Available in metal, ProMax® (a chemically-coupled, glassreinforced engineering grade of polypropylene) and Kynar materials. (See Section K, Special Purpose Spray Nozzles). • UniJet® Nozzles: – Simply unscrew the retainer cap and remove the spray tip by hand. Then install the new spray tip and tighten the retainer cap to secure the spray tip in place.
UniJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B24 Narrow Angle Spray 15°/30° FullJet Spray Nozzles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B27 Quick FullJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B30 Standard and Extra Large Free Passage Spray
– Available in metal material. Many of our nozzles are available in quick-connect versions. Watch for the QuickJet, Quick FullJet® and UniJet designations on the following pages. These nozzles are available with a wide variety of body types, mounting options, adapters, plugs, strainers, check valves, plates, fittings and more. See Section L, Accessories, for complete information.
QuickJet
SpiralJet® Spray Nozzles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B32 Extra Large Free Passage Spray 50°/65°/80°/95° DistriboJet® Spray Nozzles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B35 Maximum Free Passage Spray FullJet Spray Nozzles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B38
UniJet
Vaneless Spray FullJet Spray Nozzles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B40 Female body
Square Spray
Female body
FullJet Spray Nozzles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B42 Quick FullJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B45 UniJet Spray Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B47 Oval Spray
Male body
FullJet Spray Nozzles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B49
Male body
Wide Angle Square Spray FullJet Spray Nozzles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B51 Spray tip with seal
Spray tip
Tip retainer
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B1
Full Cone Nozzles
Section B – Full Cone Spray Nozzles
Full Cone Nozzles
Full Cone Spray Nozzles
Optimization Tips • Reduce operating costs and maintenance downtime by using quick-connect nozzles. Nozzle bodies remain on the header – only spray tips are replaced. • Use strainers to reduce nozzle clogging and ensure optimum performance.
ProMax® QuickJet® Nozzles with Replaceable Tips
• Use adjustable ball connections for quick, precise nozzle orientation. • Evaluate your specific spraying application and implement a regular nozzle maintenance plan. Maintenance essentials include: – Visual inspection of spray pattern. In full cone nozzles, watch for heavy streaks in the center of the spray. As wear occurs, more liquid flows to the center of the spray pattern. – Monitor flow rate and pressure to detect changes resulting from orifice or vane wear. • Be sure to use the best type of full cone nozzle for your application. – Standard full cone nozzles provide a uniform, round and full spray pattern consisting of medium- to large-sized drops.
QPPA nozzle body
Optional external O-ring (CP7717-2/17-VI)
– Spiral full cone nozzles produce relatively coarse drops in a full cone pattern with minimal flow obstruction. – Spray coverage is more uniform in standard full cone nozzles while spiral type full cone nozzles produce high flow rates in a compact nozzle size. • In addition to washing and rinsing, full cone nozzles are often used for drop disbursement in chemical reactions, metal cooling, dust suppression and fire protection. Drop size and coverage can be critical in these applications. Ask for drop size data in addition to general performance data.
Adjustable Ball Connections
Spray Pattern Inspection
Full cone spray
Spray tip
Full cone spiral spray
Strainers
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B2
Spray Nozzles, Standard Spray
Full Cone Nozzles
Features and Benefits • Solid cone-shaped spray pattern with round impact area. • Uniform distribution over a wide range of flow rates and pressures. • Medium- to large-sized drops. • Unique vane design with large flow passages provides superior control and uniform distribution. • Removable caps and vanes for easy inspection and cleaning on most models. • Removable vane has location marks for proper positioning after cleaning. • Set screws in some models secure the vane in the nozzle to prevent dislocation caused by vibration. • Polypropylene material option offers exceptional chemical and corrosion resistance and resists caking and buildup. • Wall-mounted options for installation on room exterior, vessel or pipeline. • For installations with space limitations, right-angle mounting options allow for mounting at a 90° angle.
G
Removable cap and vane 1/8" to 1/2" NPT or BSPT (F)
H
Removable vane/Polypropylene 1-1/2" to 2" NPT or BSPT (F) Maximum temperature rating is 150°F (66°C)
GG
H
Removable cap and vane 1/8" to 1/2" NPT or BSPT (M)
H
One-piece body 3/4" to 1" NPT or BSPT (F)
HF
HH
Removable vane/cast body 4" to 10" flange connection
One-piece body 1/8" to 1" NPT or BSPT (M)
Removable vane/cast body 1-1/4" to 8" NPT or BSPT (F)
GD
Wall-mounted Removable cap and vane 1/8" to 1/2" NPT or BSPT (F)
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B3
Full Cone Nozzles
Spray Nozzles, Standard Spray
HD
GGD
Wall-mounted One-piece body 3/4" to 3" NPT or BSPT (F)
GA
Wall-mounted Removable cap and vane 1/8" to 1/2" NPT or BSPT (M)
Angle type Removable cap and vane 1/8" to 1/2" NPT or BSPT (F)
Optimization Tips
See Also
• See page B2 for optimization tips.
• Accessories
GGA
Angle type Removable cap and vane 1/8" to 1/2" NPT or BSPT (M)
http://
– Adjustable ball fittings – Check valves
Applications
– Pressure gauges
• Cooling coke, primary metals and other materials
– Pressure relief valves
• Creation/dispersion of drops in chemical reaction processing
– Solenoid valves
• Dust control
– Split-eyelet connectors
– Pressure regulators
• Fire suppression/prevention
– Strainers • FullJet Maximum Free Passage spray nozzles for applications prone to clogging • SpiralJet® spray nozzles for maximum liquid throughput
• Foam break-up, aeration, deaeration • Gas scrubbing, washing, cooling • Washing/rinsing
• Kynar® FullJet spray nozzles for integrated circuit and PCB manufacturing, washing and rinsing, cooling and more (See Section K, Special Purpose Spray Nozzles) • Kynar Quick FullJet spray nozzles for strippers, etchers, developers (See Section K, Special Purpose Spray Nozzles)
Ordering Info Standard Spray Nozzle
1/4
G
Inlet Conn.
Nozzle Type
I
I
–
SS
10
Material Code
Capacity Size
I
I
Flange Connection
10
HF –
Inlet Conn.
Nozzle Type
I
I
SS
1200
Material Code
Capacity Size
I
I
BSPT connections require the addition of a “B” prior to the inlet connection.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B4
Performance Data *At the stated pressure in psi.
Nozzle Type Inlet Conn. (in.)
1/8
Standard Type G
GG
l l
GD
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
1/4
3/8
1/2
3/4
1
l
l
HD
Angle
HH
l
H
Wall Mounted GGD
GA
GGA
l
Max. Orifice Free Dia. Passage Nom. Dia. (in.) (in.)
Spray Angle (°)*
Capacity (gallons per minute)* 5
7
10
20
30
40
60
80
100
150
7
20
80
1
.031
.025
.07
.08
.10
.14
.17
.19
.23
.26
.29
.35
–
58
53
1.5
.047
.025
.11
.13
.15
.21
.25
.28
.34
.39
.43
.52
52
65
59
l
2
.047
.040
.15
.17
.20
.28
.33
.38
.46
.52
.58
.70
43
50
46
l
3
.063
.040
.22
.25
.30
.41
.50
.57
.68
.78
.87
1.0
52
65
59
l
l
3.5
.063
.050
.25
.30
.35
.48
.58
.66
.80
.91
1.0
1.2
43
50
46
l
l
3.9
.078
.040
.28
.33
.39
.54
.65
.74
.89
1.0
1.1
1.4
77
84
79
l
l
5
.078
.050
.36
.42
.50
.69
.83
.95
1.1
1.3
1.4
1.7
52
65
59
l
l
6.1
.094
.050
.44
.52
.61
.84
1.0
1.2
1.4
1.6
1.8
2.1
69
74
68
l
l
Capacity Size
l
l
l
l
l
l
l
6.5
.094
.063
.47
.55
.65
.89
1.1
1.2
1.5
1.7
1.9
2.3
45
50
46
l
l
l
l
l
l
l
10
.109
.063
.73
.85
1.0
1.4
1.7
1.9
2.3
2.6
2.9
3.5
58
67
61
l
l
12.5
.125
.063
.91
1.1
1.3
1.7
2.1
2.4
2.9
3.3
3.6
4.3
69
74
68
l
l
l
l
l
l
l
9.5
.109
.094
.69
.81
.95
1.3
1.6
1.8
2.2
2.5
2.7
3.3
45
50
46
l
l
l
l
l
l
l
15
.141
.094
1.1
1.3
1.5
2.1
2.5
2.8
3.4
3.9
4.3
5.2
64
67
61
l
l
20
.156
.109
1.5
1.7
2.0
2.8
3.3
3.8
4.6
5.2
5.8
7.0
76
80
73
l
l
l
l
l
l
l
l
l
l
l
l
22
.188
.109
1.6
1.9
2.2
3.0
3.6
4.2
5.0
5.7
6.3
7.6
87
90
82
l
l
l
l
16
.141
.125
1.2
1.4
1.6
2.2
2.7
3.0
3.6
4.2
4.6
5.6
48
50
46
l
l
l
l
25
.188
.125
1.8
2.1
2.5
3.4
4.1
4.7
5.7
6.5
7.2
8.7
64
67
61
l
l
32
.203
.141
2.3
2.7
3.2
4.4
5.3
6.1
7.3
8.3
9.2
11.1 72
75
68
l
l
40
.250
.141
2.9
3.4
4.0
5.5
6.6
7.6
9.1
10.4 11.5 13.9 88
91
83
l
l
50
.266
.156
3.6
4.2
5.0
6.9
8.3
9.5
11.4 13.0 14.4 17.4 91
94
86
l
l
l
l
l
l
2.5
.188
.172
2.1
2.5
2.9
4.1
4.9
5.6
6.7
10.2 48
50
46
l
l
l
4.0
.250
.172
3.4
4.0
4.7
6.5
7.8
8.9
10.7 12.3 13.6 16.4 67
70
63
l
l
l
7.0
.375
.203
6.0
7.0
8.2
11.3 13.7 15.6 18.8
89
92
84
l
l
l
4.2
.234
.219
3.6
4.2
4.9
6.8
11.3 12.9 14.3 17.2 48
50
46
l
l
l
7.0
.328
.219
6.0
7.0
8.2
11.3 13.7 15.6 18.8
21
24
29
67
68
62
l
l
8.0
.375
.219
6.9
8.0
9.4
13.0 15.6 17.8
21
25
27
33
72
81
82
l
l
10
.469
.219
8.6
10.0 11.8 16.2 19.5
22
27
31
34
41
78
90
94
l
l
12
.469
.250
10.3 12.0 14.1 19.4
27
32
37
41
49
89
92
84
8.2
23
9.4
7.7 21
8.5 24
29
Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B5
Full Cone Nozzles
Spray Nozzles, Standard Spray
Full Cone Nozzles
Spray Nozzles, Standard Spray
Performance Data *At the stated pressure in psi.
Nozzle Type Inlet Conn. (in.)
Standard Type G
GG
H
Wall Mounted HH
GD
HD
1-1/2
2-1/2
3
GGA
Spray Angle (°)*
Capacity (gallons per minute)* 5
7
10
20
7.1
9.7
30
6
.297
.250
5.1
6.0
l
10
.375
.250
8.6
10.0 11.8 16.2 19.5
l
l
12
.422
.250
10.3 12.0 14.1 19.4
l
14
.484
.250
12.0 14.0 16.5
l
16
.500
.313
l
20
.594
40
60
80
150
7
20
80
20
25
48
50
44
22
27
31
34
41
64
67
58
23
27
32
37
41
49
66
70
60
23
27
31
38
43
48
57
77
80
70
13.7 16.0 18.9
26
31
36
43
49
54
66
73
76
66
.313
17.1
32
39
45
54
61
68
82
90
93
81
22
27
31
34
41
48
50
44
20
24
11.7 13.4 16.1 18.4
100
l
l
10
.375
.344
8.6
l
l
16
.500
.344
13.7 16.0 18.9
26
31
36
43
49
54
66
72
74
64
l
l
20
.563
.344
17.1
20
24
32
39
45
54
61
68
82
74
76
66
l
l
30†
.719
.406
26
30
35
49
59
67
81
92
102
123
91
94
82
17
.500
.438
20
28
33
38
46
52
58
70
49
50
44
l
2
GA
Max. Orifice Free Dia. Passage Nom. Dia. (in.) (in.)
l
l
1-1/4
GGD
Angle
Capacity Size
10.0 11.8 16.2 19.5
14.6 17.0
l
l
30
.688
.438
26
30
35
49
59
67
81
92
102
123
72
74
64
l
l
35
.750
.438
30
35
41
57
68
78
94
107
119
143
75
77
68
l
l
40
.828
.438
34
40
47
65
78
89
107
123
136
164
78
80
70
l
l
50†
.938
.563
43
50
59
81
98
111
134
153
170
205
83
85
75
l
l
60†
1.125
.563
51
60
71
97
117
134
161
184
204
246
98 100 86
l
l
25
.594
.563
21
25
29
41
49
56
67
77
85
102
49
50
44
l
l
50
.875
.563
43
50
59
81
98
111
134
153
170
205
72
74
64
l
l
60
.969
.563
51
60
71
97
117
134
161
184
204
246
76
78
68
l
l
70
1.125
.563
60
70
82
113
137
156
188
215
238
287
79
82
72
l
80
1.125
.688
69
80
94
130
156
178
215
245
272
328
86
88
77
l
90
1.250
.688
77
90
106
146
176
201
242
276
306
369
95
97
84
l
l
42
.750
.688
36
42
49
68
82
94
113
129
143
172
49
50
44
l
l
80
1.094
.688
69
80
94
130
156
178
215
245
272
328
81
84
73
l
l
90
1.188
.688
77
90
106
146
176
201
242
276
306
369
86
89
77
l
l
100
1.281
.688
86
100
118
162
195
223
269
307
340
410
92
95
83
110
1.938
.813
93
110
131
186
228
263
322
372
416
509
86
89
77
120
1.375
.813
101
120
143
203
248
287
351
406
454
555 102 105 89
l l
l
Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging. †These capacity sizes are not available for H in polypropylene.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B6
Performance Data *At the stated pressure in psi.
Inlet Conn. (in.)
4
5
6
8
10
G GG
H
Max. Nozzle Orifice Free Type Capacity Dia. Passage Size Nom. Dia. (in.) HF HH GD HD GGD GA (in.)
l
l
160
1.688
l
l
180
1.859
l
l
200
l
l
210
l
l
250
l
l
l l
Spray Angle (°)*
Capacity (gallons per minute)* 5
7
10
20
30
40
60
80
100
150
7
20
80
.750
137
160
189
259
313
357
430
491
544
655
87
90
70
.875
154
180
212
292
352
401
484
552
612
737
92
95
83
2.0
1.0
171
200
236
324
391
446
537
613
680
819
97
100
87
2.156
1.0
180
210
247
340
410
468
564
644
714
860
102 105
91
1.875
1.125
214
250
295
405
488
557
672
767
850 1024
89
91
80
280
2.078
1.125
240
280
330
454
547
624
752
859
952 1147
93
96
84
l
320
2.688
1.375
274
320
377
519
625
713
860
981 1087 1310
97
100
87
l
330
2.844
1.375
283
330
389
535
645
736
887 1012 1121 1351 102 105
91
l
l
350
2.406
1.625
300
350
412
567
684
780
940 1073 1189 1433
87
90
78
l
l
400
2.719
1.625
343
400
471
648
781
892 1075 1227 1359 1638
92
95
83
l
l
450
3.031
1.750
385
450
530
729
879 1003 1209 1380 1529 1843
97
100
87
l
l
480
3.219
1.750
411
480
566
778
938 1070 1290 1472 1631 1966 102 105
91
l
l
500
2.750
1.875
428
500
589
810
977 1115 1343 1533 1699 2048
78
80
70
l
l
600
3.156
1.875
514
600
707
972 1172 1338 1612 1840 2039 2457
86
88
77
l
l
700
3.594
1.875
600
700
825 1135 1367 1561 1881 2147 2379 2867
92
95
83
l
l
800
4.031
2.250
685
800
943 1297 1563 1784 2149 2453 2719 3276 102 105
91
l
l
900
4.875
2.250
771
900 1060 1459 1758 2007 2418 2760 3058 3686 106 110
96
l
800
3.344
2.500
685
800
80
70
l
1000
3.969
l
1200
4.797
l
1300
5.313
943 1297 1563 1784 2149 2453 2719 3276
78
2.500
857 1000 1178 1621 1953 2229 2687 3067 3398 4095
86
89
77
2.625
1028 1200 1414 1945 2344 2675 3224 3680 4078 4914
97
100
87
2.625
1114 1300 1532 2107 2539 2898 3493 3987 4418 5324 103 106
92
Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B7
Full Cone Nozzles
Spray Nozzles, Standard Spray
Full Cone Nozzles
Spray Nozzles, Standard Spray
Dimensions and Weights Standard
Nozzle Type
G (F)
GG (M)
H Bar Stock (F)
H Cast (F)
H Polypropylene (F)
HF (Flange)
HH (M)
Inlet Conn. (in.)
Inlet Conn. (in.)
Length (in.)
Dia. (in.)
1
1/8
1-25/64
–
9/16
1
1-1/2
1/4
1-39/64
–
11/16
1-1/2
3/8
1-13/16
–
13/16
2-1/2
6
1/2
1-13/64
–
1
4-3/4
9/16
3/4
1/8
1-29/64
–
9/16
1
11/16
1-1/2
1/4
1-45/64
–
11/16
1-1/2
3/8
1-27/32
–
13/16
2-1/2
1/2
2-11/64
–
1
4-1/2
3/4
2-1/8
1-1/4
–
6
1
2-11/16
1-1/2
–
14
1-1/4
3-3/8
1-7/8
–
24
1-1/2
4-1/16
2-1/4
–
40
Dia. (in.)
1/8
1-7/32
–
9/16
1/4
1-15/32
–
11/16
3/8
1-13/16
–
13/16
2-1/2
1/2
2-1/4
–
1
1/8
1-9/32
–
1/4
1-9/16
–
3/8
1-27/32
–
13/16
2-1/2
1/2
2-7/32
–
1
6
3/4
2-3/16
1-1/4
–
7-1/4
1
2-3/4
1-1/2
Hex. (in.)
Net Weight (oz.)
Length (in.)
–
WallMounted
Nozzle Type
GD (F)
GGD (M)
13 HD (F)
Hex. (in.)
Net Weight (oz.)
1-1/4
3-7/16
2-1/16
–
20
1-1/2
4-1/16
2-5/16
–
28
2
5-1/16
2-3/4
–
72
6-1/4
3-1/4
–
7 lbs.
7-5/16
4
–
12-3/4 lbs.
2
5-7/16
3
–
60
2-1/2
2-1/2
6-7/8
3-7/16
–
76
3
3
7-23/32
4-1/8
–
96
4
9-7/8
5-7/16
–
18 lbs.
5
12-1/4
6-3/4 oct.
–
38 lbs.
6
14-3/8
8 oct.
–
53 lbs.
8
18-1/2
9-1/2 oct.
–
92 lbs.
1-1/2
4-1/16
2-11/32
–
2-1/4
2
5-9/32
2-13/16
–
3-3/4
4
8-1/8
9
–
27 lbs.
5
10-9/16
10
–
36 lbs.
6
12-5/8
11
–
49 lbs.
8
16-5/8
13-1/2
–
106 lbs.
10
20-3/4
16
–
173 lbs.
1/8
7/8
1/2
–
1/2
1/4
29/32
17/32
–
1/2
3/8
9/10
21/32
–
1
1/2
1-2/5
13/16
–
1-1/2
3/4
1-19/32
1-1/16
–
3-1/2
1
2-3/32
1-5/16
–
7
Based on largest/heaviest version of each type.
Based on largest/heaviest version of each type.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B8
Dimensions and Weights Angle Type
Nozzle Type
GA (F)
GGA (M)
Inlet Conn. (in.)
A (in.)
L (in.)
Net Weight (oz.)
1/8
11/16
5/8
9/16
1/4
7/8
25/32
11/16
31/32
29/32
1-1/2
1-7/32
1-5/32
2
3/8
1
7/8
13/16
1-7/16
1-9/32
3-1/4
1/2
1-17/32
1-1/16
1
2-1/32
1-9/16
6-1/4
1/8
11/16
1/4
7/8
21/32
9/16
31/32
15/16
1-1/2
13/16
11/16
1-1/4
1-5/32
2
3/8
1
29/32
13/16
1-7/16
1-5/16
3-1/4
1/2
1-17/32
1-1/8
1
2-1/32
1-5/8
6-1/4
B (in.)
C (in. sq.)
D (in.)
Based on largest/heaviest version of each type.
Materials Nozzle Type
Material Code
G
GG
H
(none)
l
l
I
l
303 Stainless Steel
SS
316 Stainless Steel
316SS
Material
HF
HH
GD
HD
GGD
GA
GGA
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Bar Stock: Brass Mild Steel
Polypropylene†
PP
Polyvinyl Chloride
PVC
l l
l
l
l
Cast: Brass Cast Iron 316 Stainless Steel
(none)
l
l
I
l
l
SS
l
l
†Polypropylene is only available for H with 1-1/2" and 2" inlet connections. Some models are available in Kynar®. Other materials available upon request. See Section K, Special Purpose Spray Nozzles for more details or contact your local representative.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B9
Full Cone Nozzles
Spray Nozzles, Standard Spray
Full Cone Nozzles
Quick and ProMax® Quick FullJet Spray Nozzles, Standard Spray Features and Benefits • Solid cone-shaped spray pattern with round impact area. • Fast and easy installation of spray tips without tools. • Automatic alignment. • Lower cost – nozzle body can be reused – only spray tips are replaced. • Removable caps and vanes for easy inspection and cleaning on some models. • Non-removable vane contributes to uniform distribution across the impact area.
• Standard Quick FullJet spray nozzle assemblies: – Nozzle body, spray tip with integral seal. • ProMax Quick FullJet spray nozzle assemblies: – Nozzle body, spray tip, optional external O-ring. • ProMax QuickJet® provides increased chemical resistance and less build-up. Additional protection against contaminants in harsh environments is provided by internal O-ring seal and optional external O-ring. See chart for maximum pressures at various temperatures. • ProMax Quick FullJet spray tips color-coded for easy flow rate identification.
Standard QuickJet Bodies
Quick FullJet Spray Tips
• QJA female and QJJA male inlet connections
Quick FullJet nozzles are comprised of two components, a body and a spray tip. QGA, QHA, QLGA and QLHA are the four spray tips available. Each of these four spray tips are compatible with either the male or female bodies.
• QJLA female and QJJLA male inlet connections
QGA
QLGA
QJA and QJLA female bodies or
QJJA and QJJLA male bodies
Standard connection Removable cap and vane
QHA
Large connection Removable cap and vane
QLHA
Spray tip
Standard connection Non-removable vane
Large connection Non-removable vane
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B10
ProMax QuickJet® Bodies • QPPA male inlet connections
ProMax Quick FullJet Spray Tips ProMax Quick FullJet nozzles are comprised of two components, a body and a spray tip. Available spray tips are shown below. In addition, there is an optional O-ring recommended for harsh environments.
QPPA nozzle body Brown QPHA-1 .1 gpm
White QPHA-1.5 .15 gpm
Gray QPHA-2 .2 gpm
Black QPHA-3 .3 gpm
Orange QPHA-3.5 .35 gpm
Green QPHA-5 .5 gpm
Yellow QPHA-6.5 .65 gpm
Beige QPHA-8 .8 gpm
Blue QPHA-10 1.0 gpm
Red QPHA-15 1.5 gpm
Optional external O-ring (CP7717-2/17-VI)
Spray tip
Capacities at 10 psi (0.7 bar)
Optimization Tips
See Also
• See page B2 for optimization tips.
• Accessories – ProMax QuickJet nozzle adapters
http://
– QuickJet adjustable ball fitting nozzle bodies. See chart for maximum pressures at various temperatures
Applications
– QuickJet nozzle system adapters
Standard Quick FullJet Spray Nozzles
ProMax Quick FullJet Spray Nozzles
• Cooling coke, primary metals and other materials
• Chemical manufacturing
– QuickJet nozzle system plugs for ProMax bodies
• Coating
– QuickJet split-eyelet bodies
• Dust control
• Cooling
• Fire suppression/prevention • Foam break-up, aeration, deaeration • Gas scrubbing, washing, cooling
• Food processing • Metal finishing
– QuickJet nozzle system plugs
– UniJet® nozzle system adapter for QuickJet systems • Kynar® Quick FullJet spray nozzles for strippers, etchers, developers (See Section K, Special Purpose Spray Nozzles)
• Printed circuit board manufacturing
ProMax QuickJet nozzle maximum pressures at various temperatures
• Washing/rinsing PRESSURE
bar psi 10.0 150 7.0 100 3.5
50
0
0
OPERATING REGION
40 4
60 16
80 27
100 38
120 49
140 60
160 71
180 82
200 °F 93 °C
LIQUID TEMPERATURE
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B11
Full Cone Nozzles
Quick and ProMax® Quick FullJet Spray Nozzles, Standard Spray
Full Cone Nozzles
Quick and ProMax® Quick FullJet Spray Nozzles, Standard Spray Performance Data *At the stated pressure in psi.
Nozzle Type
Inlet Conn. (in.)
Capacity Size
QGA QLGA QHA QLHA QPHA
1/8, 1/4, 3/8, 1/2 (QPHA 1/4, 3/8 only)
10
20
30
40
60
70
80
100
150
7
20
80
l
1
.031
.025
–
.10
.14
.17
.19
.23
.24
.26
.29
.35
–
58
53
l
1.5
.047
.025
.13
.15
.21
.25
.28
.34
.37
.39
.43
.52
52
65
59
l
l
2
.047
.040
.17
.20
.28
.33
.38
.46
.49
.52
.58
.70
43
50
46
2.5
.053
.040
.21
.25
.34
.41
.47
.57
.61
.65
.72
.87
43
50
46
l
3
.063
.040
.25
.30
.41
.50
.57
.68
.73
.78
.87
1.0
52
65
59
l
3.5
.063
.050
.30
.35
.48
.58
.66
.80
.86
.91
1.0
1.2
43
50
46
4
.067
.050
.34
.40
.55
.66
.76
.91
.98
1.0
1.2
1.4
48
55
50
l
5
.078
.050
.42
.50
.69
.83
.95
1.1
1.2
1.3
1.4
1.7
52
65
59
l
6.5
.094
.063
.55
.65
.89
1.1
1.2
1.5
1.6
1.7
1.9
2.3
45
50
46
l
8
.096
.063
.68
.80
1.1
1.3
1.5
1.8
2.0
2.1
2.3
2.8
54
65
61
l
10
.109
.063
.85
1.0
1.4
1.7
1.9
2.3
2.4
2.6
2.9
3.5
58
67
61
l l l
l l
l
l
l
l l l
l
l
15
.141
.063
1.3
1.5
2.1
2.5
2.8
3.4
3.7
3.9
4.3
5.2
80
85
80
9.5
.109
.094
.81
.95
1.3
1.6
1.8
2.2
2.3
2.5
2.7
3.3
45
50
46
15
.141
.094
1.3
1.5
2.1
2.5
2.8
3.4
3.7
3.9
4.3
5.2
64
67
61
20
.156
.109
1.7
2.0
2.8
3.3
3.8
4.6
4.9
5.2
5.8
7.0
76
80
73
22
.188
.109
1.9
2.2
3.0
3.6
4.2
5.0
5.4
5.7
6.3
7.6
87
90
82
l
16
.141
.125
1.4
1.6
2.2
2.7
3.0
3.6
3.9
4.2
4.6
5.6
48
50
46
l
20
.161
.125
1.7
2.0
2.8
3.3
3.8
4.6
4.9
5.2
5.8
7.0
62
65
59
25
.188
.125
2.1
2.5
3.4
4.1
4.7
5.7
6.1
6.5
7.2
8.7
64
67
61
l
30
.189
.141
2.5
3.0
4.1
5.0
5.7
6.8
7.3
7.8
8.7
10.4
69
72
66
l
32
.203
.141
2.7
3.2
4.4
5.3
6.1
7.3
7.8
8.3
9.2
11.1
72
75
68
l
40
.250
.141
3.4
4.0
5.5
6.6
7.6
9.1
9.8
10.4 11.5 13.9
88
91
83
l
50
.266
.156
4.2
5.0
6.9
8.3
9.5
11.4 12.2 13.0 14.4 17.4
91
94
86
l
l
l
1/2
7
l
l
3/8, 1/2
Spray Angle (°)*
Capacity (gallons per minute)*
l
l
1/4, 3/8, 1/2 (QPHA 1/4, 3/8 only)
Orifice Dia. Nom. (in.)
Max. Free Passage Dia. (in.)
l
Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B12
Quick and ProMax® Quick FullJet Spray Nozzles, Standard Spray Body Types
Nozzle Type
Length (in.)
Hex. (in.)
Net Weight (oz.)
QJA+QGA
2-13/32
1
5
QJJA+QGA
2-5/16
7/8
4-1/2
Standard
Full Cone Nozzles
Dimensions and Weights
Standard Body
Inlet Conn. (in.)
Conn. F QJA
Conn. M QJLA
QJJA
QJJLA
1/8
l
l
1/4
l
l
3/8
l
l
l
l
1/2
l
l
l
l
QPPA l l l
QJLA+QLGA
2-25/32
1-1/8
8
QJJLA+QLGA
2-27/32
1-1/8
7-1/2
QJA+QHA
1-15/16
1
2-1/2
QJJA+QHA
1-27/32
1
2
QJLA+QLHA
2-7/32
1-1/8
4-1/2
Material
Material Code
QGA
QLGA
QHA
QLHA
QJJLA+QLHA
2-1/4
1-1/8
4-1/2
Brass
(none)
l
l
l
l
303 Stainless Steel
SS
l
l
l
l
Materials Spray Tip
Standard Quick FullJet nozzles available in either brass with a Buna-N seal or stainless steel with a Viton® seal.
QPPA+QPHA
1-3/4
7/8
1/2
ProMax Quick FullJet nozzles available with a Viton seal. Other materials available upon request.
Based on largest/heaviest version of each type.
Ordering Info Quick FullJet Complete Nozzle Nozzle Body
1/4 QJA – SS + QHA – SS
I
Inlet Conn.
I
Body Type
ProMax Quick FullJet Complete Nozzle without External O-Ring
Spray Tip
I
Material Code
I
Tip Type
I
Material Code
10
I
Capacity Size
Nozzle Body
1/4
I
Inlet Conn.
Spray Tip
QPPA + QPHA –
I
Body Type
I
Tip Type
ProMax Quick FullJet Complete Nozzle with External O-Ring Nozzle Body
3
3/8
Capacity Size
Inlet Conn.
I
I
Spray Tip
QPPA + QPHA – 2A
I
Body Type
I
Tip Type
I
Capacity Size
BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B13
Full Cone Nozzles
Spray Nozzles, Standard Spray
Features and Benefits • Solid cone-shaped spray pattern with round impact area. • Unique vane design with large flow passages provides superior control and uniform distribution. • Quick and easy spray tip replacement – remove tips by unscrewing the retainer cap.
• Large choice of interchangeable spray tips, body types/sizes, materials, spray patterns, spray angles, accessories. • UniJet nozzle assemblies: – Nozzle body, slotted strainer, core, disc, tip retainer. – Nozzle body, spray tip, tip retainer.
• Lower cost – nozzle body can be reused – only spray tips are replaced.
Standard UniJet Bodies
UniJet Spray Tips
• T female and TT male inlet connections
A typical UniJet assembly will consist of a T female body or TT male body, slotted strainer, core, disc and tip retainer. A typical UniJet assembly with TG tip will consist of a T female body or TT male body, spray tip and tip retainer.
D T female body or
T female body or
TT male body
TT male body
Slotted strainer
Disc and core type 303 Stainless Steel and Hardened Stainless Steel only
TG
One-piece spray tip
Spray tip
Core Tip retainer Disc
Tip retainer
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B14
Spray Nozzles, Standard Spray
Optimization Tips
See Also
• See page B2 for optimization tips.
• Accessories – Adjustable mounting clamp nozzle bodies
– Plug valve nozzle bodies – Rollover nozzle bodies
– Ball valve nozzle bodies
Applications
– Split-eyelet bodies
– Check valves
• Cooling primary metals and other materials • Creation and dispersion of drops in chemical reaction processing • Dust control • Foam break-up, aeration, deaeration
– Strainers – Plates, tip retainers, – Swivel nozzle bodies adapters • FullJet® Maximum Free Passage spray nozzles for applications prone to clogging • SpiralJet® spray nozzles for maximum liquid throughput
• Gas scrubbing, washing, cooling • Washing/rinsing
• Kynar® Quick FullJet spray nozzles for strippers, etchers, developers (See Section K, Special Purpose Spray Nozzles)
Dimensions and Weights
Ordering Info
Standard
Nozzle Type
Length (in.)
Hex. (in.)
Net Weight (oz.)
T+D
1-1/2
13/16
2-1/4
TT+D
1-1/2
13/16
2
UniJet Complete Nozzle Nozzle Body
1/4
T
Inlet Conn.
Body Type
l
l
Spray Tip
–
SS
l
+
Material Code
TT
Inlet Conn.
Body Type
l
T+TG
1-31/32
13/16
2-1/2
l
l
–
Tip Type
Nozzle Body
1/4
TG
SS
10
Material Code
Capacity Size
l
l
Orifice Disc and Core
–
SS
l
Material Code
+
D4
l
Orifice Disc No.
–
35
HSS
Core No.
Material Code
l
l
BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.
TT+TG
1-31/32
13/16
2-1/4
Based on largest/heaviest version of each type.
Materials Material
Mesh Selection Guide
Material Spray Tip Code D TG
Brass
(none)
303 Stainless Steel
SS
l
Hardened Stainless Steel
HSS
l
l l
Other materials available upon request.
Orifice Dia. in. (mm)
Recommended Screen Mesh
Up through .018 (.46)
200
.019 (.47) through .031 (.79)
100
.032 (.80) and larger
50
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B15
Full Cone Nozzles
http://
Full Cone Nozzles
Spray Nozzles, Standard Spray
Performance Data D
*At the stated pressure in psi.
Spray Angle (°)*
Body Inlet Conn. (in.)
Orifice Disc No. – Core No.
Orifice Dia. Nom. (in.)
10
20
30
40
60
80
100
150
200
300
20
40
80
1/4
D1-31 D1.5-31 D2-31 D3-31 D1-33 D1.5-33 D2-33 D3-33 D4-33 D1-35 D1.5-35 D2-35 D3-35 D4-35 D5-35 D2-56 D3-56 D4-56 D5-56 D6-56 D7-56 D8-56 D10-56
.031 .036 .041 .047 .031 .036 .041 .047 .063 .031 .036 .041 .047 .063 .078 .041 .047 .063 .078 .094 .109 .125 .156
.08 .10 .12 .13 .09 .12 .13 .15 .20 .08 .10 .14 .16 .27 .34 – – – .38 .55 .76 .96 1.4
.11 .14 .16 .18 .11 .15 .17 .21 .28 .11 .14 .18 .22 .37 .48 – – .39 .54 .78 1.1 1.4 1.9
.13 .17 .19 .21 .12 .17 .21 .25 .34 .13 .17 .24 .26 .44 .58 .21 .29 .48 .66 .95 1.3 1.7 2.3
.15 .19 .22 .24 .14 .19 .24 .29 .39 .14 .19 .25 .30 .50 .66 .25 .34 .55 .76 1.1 1.5 1.9 2.7
.18 .23 .26 .29 .17 .23 .29 .36 .47 .17 .23 .30 .36 .60 .80 .30 .41 .67 .93 1.4 1.9 2.4 3.3
.20 .26 .30 .33 .20 .26 .33 .41 .54 .20 .26 .34 .41 .70 .92 .35 .48 .78 1.1 1.6 2.2 2.7 3.8
.23 .29 .33 .37 .22 .30 .37 .45 .60 .22 .29 .37 .45 .79 1.0 .39 .53 .87 1.2 1.7 2.4 3.1 4.3
.27 .35 .40 .44 .26 .36 .45 .55 .73 .26 .34 .45 .55 .93 1.2 .47 .65 1.1 1.5 2.1 2.9 3.7 5.2
.31 .40 .45 .50 .30 .41 .52 .63 .83 .29 .39 .51 .62 1.1 1.4 .55 .75 1.2 1.7 2.5 3.4 4.3 6.0
.37 .48 .55 .60 .37 .50 .63 .76 1.02 .35 .46 .60 .74 1.3 1.7 .67 .92 1.5 2.1 3.0 4.2 5.3 7.4
49 57 62 63 27 37 45 48 50 19 23 40 45 68 67 – – 20 26 34 45 52 62
47 65 63 65 32 43 52 54 56 23 27 44 50 70 69 14 20 26 32 39 52 57 65
43 53 61 63 35 45 55 57 61 26 29 47 52 71 71 17 23 29 34 41 54 59 67
Capacity (gallons per minute)*
For nozzles using Orifice Disc Nos. 1, 1.5 and 2 or Core Nos. 31 and 33, Slotted Strainer No. 4514-20 equivalent to 25 mesh screen size is supplied. For all other larger capacity Discs and Cores, Slotted Strainer No. 4514-32 equivalent to 16 mesh screen size is supplied. Other body types may be available. Contact representative for further information. For additional information see Data Sheet 4498-1.
TG
*At the stated pressure in psi.
Body Inlet Conn. (in.)
Capacity Size
Orifice Dia. Nom. (in.)
Max. Free Passage Dia. (in.)
5
7
10
20
30
40
60
80
100
150
7
20
80
1/4
.3 .4 .5 .6 .7 1 2 3 3.5 5 6.5 10
.020 .022 .024 .027 .030 .036 .047 .062 .067 .082 .094 .109
.016 .018 .020 .020 .020 .025 .040 .040 .050 .050 .063 .063
– – – – – – – – – – .47 .73
– – – – – – – – – – .55 .85
– – – – – – .20 .30 .35 .50 .65 1.0
.041 .055 .069 .083 .096 .14 .28 .41 .48 .69 .89 1.4
.050 .066 .083 .099 .12 .17 .33 .50 .58 .83 1.1 1.7
.057 .076 .095 .11 .13 .19 .38 .57 .66 .95 1.2 1.9
.068 .091 .11 .14 .16 .23 .46 .68 .80 1.1 1.5 2.3
.078 .10 .13 .16 .18 .26 .52 .78 .91 1.3 1.7 2.6
.087 .12 .14 .17 .20 .29 .58 .87 1.0 1.4 1.9 2.9
.10 .14 .17 .21 .24 .35 .70 1.0 1.2 1.7 2.3 3.5
– – – – – – – – – – 45 58
50 56 56 54 54 58 50 65 50 65 50 67
61 63 63 62 63 53 46 59 46 59 46 61
Spray Angle (°)*
Capacity (gallons per minute)*
Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging. Other body types may be available. Contact representative for further information.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B16
Features and Benefits • Wide-angle solid cone-shaped spray pattern with round impact area and spray angles from 120° to 125° at 10 psi (0.7 bar). • Unique vane design with large flow passages provides superior control and uniform distribution. • Removable caps and vanes for easy inspection and cleaning on most models. • Removable vane has location marks for proper positioning after cleaning. • Set screw secures vane in the nozzle to ensure it is not dislodged by vibration. • Polypropylene material option offers exceptional chemical and corrosion resistance and resists caking and buildup. • For installations with space limitations, right-angle mounting options allow for mounting at a 90° angle.
G-W
Three-piece construction (body/cap/vane) Removable cap and vane 1/8" to 1/2" NPT or BSPT (F)
H-W
One-piece body 3/4" to 1" NPT or BSPT (F)
GG-W
GA-W
Three-piece construction (body/cap/vane) Removable cap and vane 1/8" to 1/2" NPT or BSPT (M)
H-W
Angle type Removable cap and vane 1/8" to 1/2" NPT or BSPT (F)
H-W
One-piece cast body Removable vane/cast body 1-1/4" to 4" NPT or BSPT (F)
Removable vane/Polypropylene 1-1/2" to 2" NPT or BSPT (F) Maximum temperature rating is 150°F (66°C)
GGA-W
Angle type Removable cap and vane 1/8" to 1/2" NPT or BSPT (M)
HH-W
One-piece body 1/8" to 1-1/2" NPT or BSPT (M)
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B17
Full Cone Nozzles
Spray Nozzles, Wide Angle Spray
Full Cone Nozzles
Spray Nozzles, Wide Angle Spray
Optimization Tips
See Also
• See page B2 for optimization tips.
• Accessories – Adjustable ball fittings
http://
– Check valves
Applications
– Pressure gauges
• Cooling of primary metals and other materials
– Pressure relief valves
• Creating and dispersing drops in chemical reaction processing
– Solenoid valves
• Deluging combustible materials and storage tanks for fire suppression/prevention
– Strainers
– Pressure regulators
• Dust control in the processing of bulk ores, coal, limestone, sand, gravel • Foam break-up, aeration, deaeration • Gas scrubbing, washing, cooling • Washing/rinsing
Materials Material
Ordering Info Material Code
Standard Spray Nozzle
Nozzle Type G-W
GG-W
GA-W
GGA-W
HH-W
H-W
1/4 Inlet Conn.
Bar Stock: Brass
(none)
l
l
l
l
l
l
l
l
l
l
l
l
l
303 Stainless Steel
SS
l
l
l
l
l
l
316 Stainless Steel
316SS
l
l
l
l
l
l
l
l
Mild Steel
Polypropylene†
PP
Polyvinyl Chloride
PVC
I
G – SS
I
I
Nozzle Type
Material Code
14W
I
Capacity Size
BSPT connections require the addition of a “B” prior to the inlet connection.
l l
Cast: Brass Cast Iron 316 Stainless Steel
(none)
l
l
l
SS
l
†Polypropylene is only available for H with 1-1/2" and 2" inlet connections. Some models are available in Kynar®. Other materials available upon request. See Section K, Special Purpose Spray Nozzles for more details or contact your local representative.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B18
Performance Data *At the stated pressure in psi.
Inlet Conn. (in.)
1/8
1/4
3/8
1/2
Orifice Dia. Nom. (in.)
Max. Free Passage Dia. (in.)
5
7
10
15
20
30
40
60
80
5
10
1.5W
.047
.025
–
–
.15
.18
.21
.25
.28
.34
.39
–
120
86
2.8W
.063
.040
–
–
.28
.34
.39
.46
.53
.64
.73
–
120
102
4.3W
.078
.040
–
–
.43
.52
.59
.71
.81
.98
1.1
–
120
102
5.6W
.094
.040
–
.48
.56
.67
.77
.93
1.1
1.3
1.5
–
120
102
8W
.094
.050
–
.68
.80
.96
1.1
1.3
1.5
1.8
2.1
–
120
103
Nozzle Type Standard Type
Capacity Size
Angle
G-W GG-W HH-W H-W GA-W GGA-W
Spray Angle (°)*
Capacity (gallons per minute)*
80
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
10W
.109
.050
.73
.85
1.0
1.2
1.4
1.7
1.9
2.3
2.6
112
120
103
l
l
12W
.125
.050
.87
1.0
1.2
1.4
1.7
2.0
2.3
2.7
3.1
114
120
103
l
l
l
14W
.141
.063
1.0
1.2
1.4
1.7
1.9
2.3
2.6
3.2
3.6
114
120
103
l
l
l
17W
.156
.063
1.2
1.4
1.7
2.0
2.3
2.8
3.2
3.9
4.4
114
120
103
l
l
l
20W
.172
.094
1.5
1.7
2.0
2.4
2.8
3.3
3.8
4.6
5.2
114
120
104
l
l
l
24W
.188
.094
1.7
2.0
2.4
2.9
3.3
4.0
4.5
5.5
6.2
114
120
104
l
l
l
27W
.203
.109
2.0
2.3
2.7
3.3
3.7
4.5
5.1
6.2
7.0
114
120
106
l
l
l
30W
.219
.109
2.2
2.5
3.0
3.6
4.1
5.0
5.7
6.8
7.8
114
120
108
l
l
l
35W
.234
.125
2.5
3.0
3.5
4.2
4.8
5.8
6.6
8.0
9.1
114
120
108
l
l
l
40W
.250
.125
2.9
3.4
4.0
4.8
5.5
6.6
7.6
9.1
10.4
114
120
108
l
l
l
45W
.250
.141
3.3
3.8
4.5
5.4
6.2
7.5
8.5
10.3 11.7
114
120
110
l
l
l
50W
.266
.156
3.6
4.2
5.0
6.0
6.9
8.3
9.5
11.4 13.0
114
120
112
7.0
8.4
9.5
11.4 12.9 15.4 17.5
115
120
112
l
l
l
l
l
l
l
l
3/4
l
l
6W
.391
.172
5.2
6.0
1
l
l
11W
.516
.219
9.5
11.0 12.9 15.4 17.5
1-1/4
l
l
16W
.609
.250
13.8 16.0 18.7
22
1-1/2
l
l
24W
.719
.406
21
24
28
34
2
l
47W
.984
.438
41
47
55
2-1/2
l
70W
1.3
.563
60
70
3
l
95W
1.4
.688
82
4
l
188W
2.0
.813
162
21
24
28
32
117
120
117
25
30
34
41
47
118
121
119
38
46
52
62
70
119
124
119
66
75
89
101
121
137
120
124
119
82
98
111
133
151
180
204
120
125
119
95
111
133
151
180
205
244
277
120
125
119
188
220
263
298
357
405
484
549
120
125
119
Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B19
Full Cone Nozzles
Spray Nozzles, Wide Angle Spray
Full Cone Nozzles
Spray Nozzles, Wide Angle Spray
Dimensions and Weights Standard
Nozzle Type
G-W (F)
GG-W (M)
HH-W (M)
H-W Bar Stock (F)
H-W Cast (F)
H-W Poly (F)
Inlet Conn. (in.)
Hex (in.)
Net Weight (oz.)
Length (in.)
Dia. (in.)
1/8
1-7/32
–
9/16
1
1/4
1-15/32
–
11/16
1-1/2
3/8
1-13/16
–
13/16
2-1/2
1/2
2-1/4
–
1
6
1/8
1-9/32
–
9/16
3/4
1/4
1-9/16
–
11/16
1-1/2
3/8
1-27/32
–
13/16
2-1/2
1/2
2-7/32
–
1
6
1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2
11/16 29/32 1-3/16 1-3/8 1-19/32 2-3/32 2-3/4 3-1/4
1/2 17/32 21/32 13/16 1-1/16 1-5/16 1-11/16 2
– – – – – – – –
1/2 1/2 1 1-1/2 3-1/2 7 13-1/2 20
3/4
2-3/16
1-1/4
–
7-1/4
1
2-3/4
1-1/2
–
13
1-1/4 1-1/2 2 2-1/2 3 4
3-7/16 4-1/16 5-7/16 6-7/8 7-23/32 9-7/8
2-1/16 2-5/16 3 3-7/16 4-1/8 5-7/16
– – – – – –
20 28 60 76 96 18 lbs.
1-1/2
4-7/32
2-11/32
–
2-1/2
2
5-7/16
2-13/16
–
4
Wide angle FullJet nozzles are mounted under scaffolding to clean building exteriors.
Based on largest/heaviest version of each type.
Dimensions and Weights Angle Type
Nozzle Type
GA-W (F)
GGA-W (M)
Inlet Conn. (in.)
A (in.)
1/8
11/16
5/8
9/16
1/4
7/8
25/32
11/16
B (in.)
C (in. sq.)
L (in.)
Net Weight (oz.)
31/32
29/32
1-1/2
1-7/32
1-5/32
2
D (in.)
3/8
1
7/8
13/16
1-7/16
1-9/32
3-1/4
1/2
1-17/32
1-1/16
1
2-1/32
1-9/16
6-1/4
1/8
11/16
21/32
9/16
31/32
15/16
1-1/2
1/4
7/8
13/16
11/16
1-1/4
1-5/32
2
3/8
1
29/32
13/16
1-7/16
1-5/16
3-1/4
1/2
1-17/32
1-1/8
1
2-1/32
1-5/8
6-1/4
Based on largest/heaviest version of each type.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B20
Features and Benefits • Solid wide cone-shaped spray pattern with round impact area with spray angle of 120° at 10 psi (0.7 bar). • Fast and easy installation of spray tips without tools. • Automatic alignment. • Lower cost – nozzle body can be reused – only spray tips are replaced. • Removable caps and vanes for easy inspection and cleaning on some models. • Non-removable vanes that contribute to uniform distribution across the impact area on some models.
• Standard Quick FullJet spray nozzle assemblies: – Nozzle body, spray tip with integral seal. • ProMax Quick FullJet spray nozzle assemblies: – Nozzle body, spray tip and optional external O-ring. • ProMax QuickJet® provides increased chemical resistance and less build-up. Additional protection against contaminants in harsh environments is provided by internal O-ring seal and optional external O-ring. See chart for maximum pressures at various temperatures. • ProMax Quick FullJet spray tips color-coded for easy flow rate identification.
Standard QuickJet Bodies
Quick FullJet Spray Tips
• QJA female and QJJA male inlet connections
Quick FullJet nozzles are comprised of two components, a body and a spray tip. QHA-W, QGA-W, QLHA-W and QLGA-W are the four spray tips available. Each of these four spray tips are compatible with either the male or female bodies.
• QJLA female and QJJLA male inlet connections
QGA-W
QLGA-W
QJA and QJLA female bodies or
QJJA and QJJLA male bodies Standard connection Removable cap and vane
QHA-W
Large connection Removable cap and vane
QLHA-W
Spray tip
ProMax QuickJet nozzle maximum pressures at various temperatures PRESSURE
bar psi 10.0 150
Standard connection Non-removable vane
Large connection Non-removable vane
7.0 100 3.5
50
0
0
OPERATING REGION
40 4
60 16
80 27
100 38
120 49
140 60
160 71
180 82
200 °F 93 °C
LIQUID TEMPERATURE
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B21
Full Cone Nozzles
Quick and ProMax® Quick FullJet Spray Nozzles, Wide Angle Spray
Full Cone Nozzles
Quick and ProMax® Quick FullJet Spray Nozzles, Wide Angle Spray ProMax QuickJet® Bodies
ProMax Quick FullJet Spray Tips
• QPPA male inlet connections
ProMax Quick FullJet nozzles are comprised of two components, a body and a spray tip. Available tips are shown below. In addition, there is an optional 0-ring recommended for harsh environments.
QPHA-W QPPA nozzle body White QPHA-2.8W .28 gpm
Optional external O-ring (CP7717-2/17-VI)
Black QPHA-4.3W .43 gpm
Yellow QPHA-10W 1.0 gpm
Spray tip
Orange QPHA-5.6W .56 gpm
Green QPHA-8W .80 gpm
Blue Red QPHA-12W QPHA-14W 1.2 gpm 1.4 gpm Capacities at 10 psi (0.7 bar)
Optimization Tips
See Also
• See page B2 for optimization tips.
• Accessories
http://
– ProMax QuickJet nozzle adapters
Applications
– QuickJet adjustable ball fitting bodies – QuickJet nozzle system adapters
Standard Quick FullJet Spray Nozzles
ProMax Quick FullJet Spray Nozzles
• Cooling and rinsing
• Chemical manufacturing
• Dust control
• Coating
• Gas scrubbing, washing, cooling
• Cooling
• Product washing/rinsing
• Metal finishing
– QuickJet nozzle system plugs – QuickJet nozzle system plugs for ProMax bodies – QuickJet split-eyelet bodies – UniJet® nozzle system adapter for QuickJet systems
• Food processing • Parts washing/rinsing • Printed circuit board manufacturing
Ordering Info Quick FullJet Complete Nozzle Nozzle Body
ProMax Quick FullJet Complete Nozzle without External O-Ring
Spray Tip
1/4 QJJA – SS + QHA – SS
l
l
l
l
l
Inlet Conn.
Body Type
Material Code
Tip Type
Material Code
Nozzle Body
8W
1/4
Capacity Size
Inlet Conn.
l
l
Spray Tip
Nozzle Body
QPPA + QPHA – 14W
l
l
l
Body Type
Tip Type
Capacity Size
BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.
ProMax Quick FullJet Complete Nozzle with External O-Ring
3/8
l
Inlet Conn.
Spray Tip
QPPA + QPHA – 2.8W
l
l
l
Body Type
Tip Type
Capacity Size
O-Ring to be ordered separately.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B22
Performance Data *At the stated pressure in psi.
Inlet Conn. (in.)
Quick FullJet Tip Type
Capacity Size
QGA-W QLGA-W QHA-W QLHA-W QPHA-W
1/8, 1/4, 3/8, 1/2 (QPHA 1/4, 3/8 only)
l
1/4, 3/8, 1/2 (QPHA 1/4, 3/8 only)
l
l
1/2
7
10
15
30
40
60
70
80
5
10
80
Spray Angle (°)*
Capacity (gallons per minute)*
l
2.8W
.063
.040
–
.28
.33
.45
.52
.62
.66
.70
–
120
102
l
4.3W
.078
.040
–
.43
.51
.70
.79
.95
1.0
1.1
–
120
102
l
l
l
5.6W
.094
.040
.48
.56
.67
.91
1.0
1.2
1.3
1.4
–
120
102
l
l
l
8W
.094
.050
.68
.80
.96
1.3
1.5
1.8
1.9
2.0
–
120
103
l
l
l
10W
.109
.050
.85
1.0
1.2
1.6
1.8
2.2
2.4
2.5
112
120
103
l
l
l
12W
.125
.050
1.0
1.2
1.4
1.9
2.2
2.6
2.8
3.0
114
120
103
l
l
l
14W
.141
.063
1.2
1.4
1.7
2.3
2.6
3.1
3.3
3.5
114
120
103
17W
.156
.063
1.5
1.7
2.0
2.8
3.1
3.7
4.0
4.2
114
120
103
20W
.172
.094
1.7
2.0
2.4
3.2
3.7
4.4
4.7
5.0
114
120
104
l
24W
.188
.094
2.1
2.4
2.9
3.9
4.4
5.3
5.7
6.0
114
120
104
l
27W
.203
.109
2.3
2.7
3.2
4.4
5.0
5.9
6.4
6.7
114
120
106
l
30W
.219
.109
2.6
3.0
3.6
4.9
5.5
6.6
7.1
7.5
114
120
108
l
35W
.234
.125
3.0
3.5
4.2
5.7
6.4
7.7
8.2
8.7
114
120
108
l
40W
.250
.125
3.4
4.0
4.8
6.5
7.4
8.8
9.4
10.0
114
120
108
l
45W
.250
.141
3.8
4.5
5.4
7.3
8.3
9.9
10.6 11.2
114
120
110
50W
.266
.156
4.3
5.0
6.0
8.1
9.2
11.0 11.8 12.5
114
120
112
l
3/8, 1/2
Orifice Dia. Nom. (in.)
Max. Free Passage Dia. (in.)
l
l
l
l
Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.
Dimensions and Weights Standard
Body Types
Nozzle Type
Length (in.)
Hex. (in.)
Net Weight (oz.)
QJA+QGA-W
2-11/16
1
5-1/2
QJJA+QGA-W
2-5/8
7/8
4-1/2
1/8
l
l
QJLA+QLGA-W
3-5/32
1-1/8
8-1/2
1/4
l
l
3/8
l
l
l
l
1/2
l
l
l
l
QJJLA+QLGA-W
3-3/16
1-1/8
8-1/2
QJA+QHA-W
2-1/16
1
3-1/2
QJJA+QHA-W
1-31/32
1
3-1/2
QJLA+QLHA-W
2-7/16
1-1/8
5
QJJLA+QLHA-W
2-1/2
1-1/8
5
QPPA+QPHA-W
1-3/4
Based on largest/heaviest version of each type.
7/8
Standard Body Inlet Conn. (in.)
Conn. F QJA
Conn. M QJLA
QJJA
QJJLA
QPPA l l l
Materials
1/2
Spray Tip
Material
Material Code
QGA-W
QLGA-W
QHA-W
QLHA-W
Brass
(none)
l
l
l
l
303 Stainless Steel
SS
l
l
l
l
Standard Quick FullJet nozzles available in either brass with a Buna-N seal or stainless steel with a Viton® seal. ProMax Quick FullJet nozzles available with a Viton seal. Other materials available upon request.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B23
Full Cone Nozzles
and ProMax® Quick FullJet Quick Spray Nozzles, Wide Angle Spray
Full Cone Nozzles
Spray Nozzles, Wide Angle Spray
Features and Benefits • Solid cone-shaped spray pattern with round impact area. • Unique vane design with large flow passages provides superior control and uniform distribution.
• A large choice of interchangeable spray tips, body types/sizes, materials and accessories. • UniJet nozzle assemblies: – With TG-W tip: nozzle body, screen strainer, tip, tip retainer.
• Quick and easy spray tip replacement – remove tips by unscrewing the retainer cap.
– With TH-W tip: nozzle body, spray tip.
• Lower cost – nozzle body can be reused – only spray tips are replaced.
Standard UniJet Bodies
UniJet Spray Tips
• T female and TT male inlet connections
A typical UniJet assembly with TG-W tip will consist of a T female body or TT male body, screen strainer, spray tip and tip retainer. A typical UniJet assembly with TH-W tip will consist of a T female body or TT male body, spray tip and retainer. TH-W tips are designed so the spray tip serves as tip and retainer in one.
T female body or
T female body or
TT male body
TT male body
TG-W
Spray tip only
TH-W
Spray tip and tip retainer in one
Screen strainer Spray tip and retainer Spray tip
Tip retainer
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B24
Spray Nozzles, Wide Angle Spray
Optimization Tips
See Also
• See page B2 for optimization tips.
• Accessories – Adjustable mounting clamp nozzle bodies – Ball valve nozzle bodies
Applications
– Rollover nozzle bodies – Strainers
– Plates, tip retainers, adapters
• Creating and dispersing drops in chemical reaction processing
– Plug valve nozzle bodies – Split-eyelet bodies
– Check valves
• Cooling of primary metals and other materials
Full Cone Nozzles
http://
– Swivel nozzle bodies
• Dust control • Foam break-up, aeration, deaeration • Gas scrubbing, washing, cooling • Washing/rinsing
Performance Data *At the stated pressure in psi.
Body Inlet Conn. (in.)
1/8, 1/4
1/4
UniJet Tip Type
1/2
Orifice Dia. Nom. (in.)
Spray Angle (°)*
Capacity (gallons per minute)*
TG-W
TH-W
5
7
10
15
20
30
40
60
80
5
10
80
l
l
2.8W
.063
.040
.20
.24
.28
.34
.39
.46
.53
.64
.73
–
120
102
l
l
4.3W
.078
.040
.31
.36
.43
.52
.59
.71
.81
.98
1.1
–
120
102
l
l
5.6W
.094
.040
.41
.48
.56
.67
.77
.93
1.1
1.3
1.5
–
120
102
l
l
8W
.094
.050
.58
.68
.80
.96
1.1
1.3
1.5
1.8
2.1
–
120
103
l
l
10W
.109
.050
.73
.85
1.0
1.2
1.4
1.7
1.9
2.3
2.6
112
120
103
12W
.125
.050
.87
1.0
1.2
1.4
1.7
2.0
2.3
2.7
3.1
114
120
103
l
14W
.141
.063
1.0
1.2
1.4
1.7
1.9
2.3
2.6
3.2
3.6
114
120
103
l
17W
.156
.063
1.2
1.4
1.7
2.0
2.3
2.8
3.2
3.9
4.4
114
120
103
l
20W
.172
.094
1.5
1.7
2.0
2.4
2.8
3.3
3.8
4.6
5.2
114
120
104
l
24W
.188
.094
1.7
2.0
2.4
2.9
3.3
4.0
4.5
5.5
6.2
114
120
104
l
27W
.203
.109
2.0
2.3
2.7
3.3
3.7
4.5
5.1
6.2
7.0
114
120
106
l
30W
.219
.109
2.2
2.5
3.0
3.6
4.1
5.0
5.7
6.8
7.8
114
120
108
l
35W
.234
.125
2.5
3.0
3.5
4.2
4.8
5.8
6.6
8.0
9.1
114
120
108
l l
3/8
Capacity Size
Max. Free Passage Dia. (in.)
Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging. Other body types may be available. Contact representative for further information.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B25
Full Cone Nozzles
Spray Nozzles, Wide Angle Spray
Dimensions and Weights Nozzle Type
Standard
Length (in.)
Hex. (in.)
Materials Net Weight (oz.)
T+TG-W TT+TG-W
2-7/32
13/16
3
T+TH-W TT+TH-W
2-7/32
13/16
3
Spray Tip
Material
Material Code
TG-W
TH-W
Brass
(none)
l
l
303 Stainless Steel
SS
l
l
Other materials available upon request.
Based on largest/heaviest version of each type.
Ordering Info Mesh Selection Guide
UniJet Complete Nozzle Nozzle Body
1/4
T
Inlet Conn.
Body Type
l
l
Spray Tip
– SS + TG –
l
Material Code
l
Tip Type
SS
14W
Material Code
Capacity Size
l
l
BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.
Orifice Dia. in. (mm)
Recommended Screen Mesh
Up through .018 (.46)
200
.019 (.47) through .031 (.79)
100
.032 (.80) and larger
50
UniJet spray nozzles used to melt ice and wash condensing coils in instant coffee production. Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B26
Features and Benefits • Solid narrow angle cone-shaped spray pattern with round impact area and spray angles of 15° and 30° at 40 psi (2.8 bar). • Significantly higher impact per unit area than wider angle nozzles at the same flow rate. • Unique vane design with large flow passages provides superior control and uniform distribution. • Removable caps and vanes for easy inspection and cleaning on many models.
G-15
Removable cap and vane 1/8" to 1/2" NPT or BSPT (F)
H-15
One-piece body Removable vane 3/4" to 3" NPT or BSPT (F)
GG-15
G-30
Removable cap and vane 1/8" to 1/2" NPT or BSPT (M)
H-15
Removable cap and vane 1/8" to 3/4" NPT or BSPT (F)
GG-30
Removable cap and vane 1/8" to 3/4" NPT or BSPT (M)
HH-30
Two-piece cast body Removable vane 4" to 5" NPT or BSPT (F)
One-piece body Removable vane 1" to 2-1/2" NPT or BSPT (M)
Optimization Tips
See Also
• See page B2 for optimization tips.
• Accessories – Adjustable ball fittings
Applications • Cleaning and washing that requires deep penetration and/or spray induced turbulence
http://
– Pressure relief valves
– Check valves
– Solenoid valves
– Pressure gauges
– Split-eyelet connectors
– Pressure regulators
– Strainers
• Cooling and cleaning the inside of ducts and pipes • Desuperheating of steam
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B27
Full Cone Nozzles
Spray Nozzles, Narrow Angle Spray 15°/30°
Full Cone Nozzles
Spray Nozzles, Narrow Angle Spray 15°/30° Performance Data *At the stated pressure in psi.
Inlet Conn. (in.)
Nozzle Type
Capacity Size
10
20
30
40
60
80
100
150
200
300
10
40
100
Capacity (gallons per minute)*
G-15
GG-15
l
l
1507
.063
.35
.49
.61
.70
.86
.99
1.1
1.4
1.6
1.9
13
15
15
l
l
1514
.094
.70
.99
1.2
1.4
1.7
2.0
2.2
2.7
3.1
3.8
13
15
15
1/4
l
l
1530
.125
1.5
2.1
2.6
3.0
3.7
4.2
4.7
5.8
6.7
8.2
13
15
15
3/8
l
l
1550
.172
2.5
3.5
4.3
5.0
6.1
7.1
7.9
9.7
11.2
13.7
13
15
15
1/2
l
l
1590
.219
4.5
6.4
7.8
9.0
11.0
12.7
14.2
17.4
20
25
13
15
15
1/8
H-15
Spray Angle (°)*
Orifice Dia. Nom. (in.)
3/4
l
15150
.297
7.5
10.6
13.0
15.0
18.4
21
24
29
34
41
13
15
15
1
l
15280
.391
14.0
19.8
24
28
34
40
44
54
63
77
13
15
15
1-1/4
l
15430
.484
22
30
37
43
53
61
68
83
96
118
14
15
15
1-1/2
l
15630
.594
32
45
55
63
77
89
100
122
141
173
14
15
15
2
l
151150
.797
58
81
100
115
141
163
182
223
257
315
14
15
15
2-1/2
l
151750
.969
88
124
152
175
214
247
277
339
391
479
14
15
15
3
l
152500
1.156
125
177
217
250
306
354
395
484
559
685
14
15
15
4
l
154500
1.141
225
318
390
450
551
636
712
871
1006
1232
14
15
15
5
l
157000
1.922
350
495
606
700
857
990
1107
1356
1565
1917
14
15
15
*At the stated pressure in psi.
Inlet Conn. (in.)
Nozzle Type
Capacity Size
Orifice Dia. Nom. (in.)
G-30
GG-30
15
20
30
40
60
80
100
150
200
300
15
40
100
l
l
3001.4
.031
.086
.099
.12
.14
.17
.20
.22
.27
.31
.38
17
30
31
l
l
3002.5
.031
.15
.18
.22
.25
.31
.35
.40
.48
.56
.68
17
30
32
l
l
3004
.047
.24
.28
.35
.40
.49
.57
.63
.77
.89
1.1
26
30
32
l
l
3007
.063
.43
.49
.61
.70
.86
.99
1.1
1.4
1.6
1.9
23
30
30
1/4
l
l
3009
.078
.55
.64
.78
.90
1.1
1.3
1.4
1.7
2.0
2.5
23
30
30
3/8
l
l
3014
.094
.86
.99
1.2
1.4
1.7
2.0
2.2
2.7
3.1
3.8
25
30
30
1/2
l
l
3030
.125
1.8
2.1
2.6
3.0
3.7
4.2
4.7
5.8
6.7
8.2
26
30
31
3/4
l
l
3050
.172
3.1
3.5
4.3
5.0
6.1
7.1
7.9
9.7
11.2
13.7
26
30
31
l
3070
.203
4.3
4.9
6.1
7.0
8.6
9.9
11.1
13.6
15.7
19.2
27
30
30
l
30100
.250
6.1
7.1
8.7
10.0
12.2
14.1
15.8
19.4
22
27
27
30
30
l
30150
.297
9.2
10.6
13.0
15.0
18.4
21
24
29
34
41
27
30
30
l
30200
.344
12.2
14.1
17.3
20
24
28
32
39
45
55
27
30
30
l
30250
.375
15.3
17.7
22
25
31
35
40
48
56
68
27
30
30
l
30300
.406
18.4
21
26
30
37
42
47
58
67
82
27
30
30
l
30350
.438
21
25
30
35
43
49
55
68
78
96
28
30
30
l
30400
.469
24
28
35
40
49
57
63
77
89
110
28
30
30
l
30500
.531
31
35
43
50
61
71
79
97
112
137
28
30
30
l
30600
.578
37
42
52
60
73
85
95
116
134
164
28
30
30
l
30700
.625
43
49
61
70
86
99
111
136
157
192
28
30
30
l
301000
.750
61
71
87
100
122
141
158
194
224
274
28
30
30
l
301100
.781
67
78
95
110
135
156
174
213
246
301
28
30
30
l
301200
.813
73
85
104
120
147
170
190
232
268
329
28
30
30
1/8
1 1-1/4 1-1/2
2
2-1/2
HH-30
Spray Angle (°)*
Capacity (gallons per minute)*
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B28
Dimensions and Weights Standard
Nozzle Type
G-15 (F)
GG-15 (M)
G-30 (F)
GG-30 (M)
H-15 Bar Stock (F)
H-15 Cast (F)
HH-30 (M)
Materials
Inlet Conn. (in.)
Length (in.)
Dia. (in.)
Hex. (in.)
Net Weight (oz.)
1/8
1-13/32
–
11/16
2
1/4
1-11/16
–
13/16
3
3/8
2-1/8
–
1
6
1/2
2-5/8
–
1-1/4
11
1/8
1-17/32
–
11/16
2
1/4
1-25/32
–
13/16
3
3/8
2-3/16
–
1
6
1/2
2-3/4
–
1-1/4
11
1/8
1-13/32
–
11/16
2
1/4
1-11/16
–
13/16
3
3/8
2-1/8
–
1
6
1/2
2-5/8
–
1-1/4
11
3/4
3-5/16
–
1-1/2
20
1/8
1-17/32
–
11/16
2
1/4
1-25/32
–
13/16
3
3/8
2-3/16
–
1
6
1/2
2-3/4
–
1-1/4
11
3/4
3-7/16
–
1-1/2
20
3/4
2-27/32
1-1/4
–
15
1
3-5/8
1-1/2
–
20
1-1/4
4-5/8
1-7/8
–
40
1-1/2
5
2-5/16
–
48
2
7-7/32
3
–
64
2-1/2
9-3/16
3-7/16
–
6-1/2 lbs.
3
10-9/16
4-1/8
–
9-1/2 lbs.
4
13-5/16
5-7/16
–
20 lbs.
5
16-7/8
6-3/4
–
36 lbs.
1
3-5/8
1-15/16
–
20
1-1/4
5
1-11/16
–
36
1-1/2
6-3/32
1-7/8
–
52
2
7-7/8
2-3/8
–
7-3/8 lbs.
2-1/2
10-3/8
2-7/8
–
12 lbs.
Nozzle Type Material Code G-15 GG-15 G-30 GG-30 H-15 HH-30
Material Bar Stock: Brass
(none)
l
l
l
l
l
SS
l
l
l
l
l
l
(none)
l
l
l
l
SS
l
l
l
l
303 Stainless Steel Cast: Brass 316 Stainless Steel/303 Caps
Other materials available upon request.
Ordering Info Standard Spray Nozzle
1/4
l
Inlet Conn.
G – SS
l
l
Nozzle Type
Material Code
1/2 GG – SS
l
l
l
Inlet Conn.
Nozzle Type
Material Code
1530
l
Capacity Size
3030
l
Capacity Size
BSPT connections require the addition of a “B” prior to the inlet connection.
Based on largest/heaviest version of each type.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B29
Full Cone Nozzles
Spray Nozzles, Narrow Angle Spray 15°/30°
Full Cone Nozzles
Quick Spray Nozzles, Narrow Angle Spray 15°/30° Features and Benefits • Solid narrow cone-shaped spray pattern with round impact area and spray angles of 15° and 30° at 40 psi (2.8 bar). • Fast and easy installation of spray tips without tools.
• Lower cost – nozzle body can be reused – only spray tips are replaced. • Removable caps and vanes for easy inspection and cleaning.
• Automatic alignment.
Standard QuickJet® Bodies
Quick FullJet Spray Tips
• QJA female and QJJA male inlet connections
Quick FullJet nozzles are comprised of two components, a body and a spray tip. QGA-15, QGA-30, QLGA-15 and QLGA-30 are the four spray tips available. Each of these four spray tips are compatible with either the male or female bodies.
• QJLA female and QJJLA male inlet connections
QGA-15
QLGA-15
QJA and QJLA female bodies or
QJJA and QJJLA male bodies
Removable cap and vane
QGA-30
Removable cap and vane Large connection
QLGA-30
Spray tip
Removable cap and vane
Removable cap and vane Large connection
Optimization Tips
See Also
• See page B2 for optimization tips.
• Accessories – QuickJet adjustable ball fitting bodies
Applications
– QuickJet nozzle system adapters
• Cleaning and washing that requires deep penetration and/or spray induced turbulence
– QuickJet split-eyelet bodies
http://
– QuickJet nozzle system plugs – UniJet® nozzle system adapter for QuickJet systems
• Cooling/cleaning the inside of ducts/pipes • Desuperheating of steam
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B30
Performance Data *At the stated pressure in psi.
Body Inlet Conn. (in.)
Quick FullJet Tip Type QGA-15
1/8, 1/4, 3/8, 1/2
l
1/4, 3/8, 1/2 3/8, 1/2 1/2
l
Capacity Size
QLGA-15
l l l
Spray Angle (°)*
Orifice Dia. Nom. (in.)
10
20
30
40
60
80
100
150
200
300
10
40
100
.063 .094 .125 .172 .219
.35 .70 1.5 2.5 4.5
.49 .99 2.1 3.5 6.4
.61 1.2 2.6 4.3 7.8
.70 1.4 3.0 5.0 9.0
.86 1.7 3.7 6.1 11.0
.99 2.0 4.2 7.1 12.7
1.1 2.2 4.7 7.9 14.2
1.4 2.7 5.8 9.7 17.4
1.6 3.1 6.7 11.2 20
1.9 3.8 8.2 13.7 25
13 13 13 13 13
15 15 15 15 15
15 15 15 15 15
1507 1514 1530 1550 1590
Capacity (gallons per minute)*
*At the stated pressure in psi.
Body Inlet Conn. (in.)
Quick FullJet Tip Type QGA-30
1/8, 1/4, 3/8, 1/2
l l l
1/4, 3/8, 1/2 3/8, 1/2
Orifice Dia. Nom. (in.)
15
20
30
40
60
80
100
150
200
300
15
40
100
3001.4 3002.5 3004 3007 3009 3014
.031 .031 .047 .063 .078 .094
.086 .15 .24 .43 .55 .86
.099 .18 .28 .49 .64 .99
.12 .22 .35 .61 .78 1.2
.14 .25 .40 .70 .90 1.4
.17 .31 .49 .86 1.1 1.7
.20 .35 .57 .99 1.3 2.0
.22 .40 .63 1.1 1.4 2.2
.27 .48 .77 1.4 1.7 2.7
.31 .56 .89 1.6 2.0 3.1
.38 .68 1.1 1.9 2.5 3.8
17 17 26 23 23 25
30 30 30 30 30 30
31 32 32 30 30 30
QLGA-30
l
l l
Dimensions and Weights Standard
Nozzle Type QJA+QGA
Length (in.) 2-3/4
Spray Angle (°)*
Capacity Size
Hex. (in.) 1
Net Weight (oz.) 5
QJJA+QGA
2-21/32
7/8
4-1/2
QJLA+QLGA
3-5/16
1-1/8
9
QJJLA+QLGA
3-3/8
1-1/8
9
Based on largest/heaviest version of each type.
Capacity (gallons per minute)*
Body Types Inlet Conn. (in.) 1/8 1/4 3/8 1/2
Materials
Standard Body Conn. F QJA
Material
Material Code
Brass 303 Stainless Steel
(none) SS
Conn. M
QJLA
QJJA
l
l
l
l
QJJLA
Spray Tip QGA
QLGA
l
l
l
l
Other materials available upon request.
l
l
l
l
l
l
l
l
Ordering Info Quick FullJet Complete Nozzle Nozzle Body
1/4
QJA
Inlet Conn.
Body Type
l
l
–
Spray Tip
SS
l
Material Code
+
QGA
l
Tip Type
Nozzle Body
1/2
l
Inlet Conn.
QJLA –
l
Body Type
– SS
l
Material Code
1507
l
Capacity Size
Spray Tip
SS
l
Material Code
+ QLGA – SS
l
l
Tip Type
Material Code
3014
l
Capacity Size
BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B31
Full Cone Nozzles
Quick Spray Nozzles, Narrow Angle Spray 15°/30°
Spray Nozzles, Standard and Extra Large Free Passage Spray Full Cone Nozzles
Features and Benefits • Solid cone-shaped spray pattern with round impact area. • Maximum liquid throughput for a given pipe size. • Maximum free passage design minimizes clogging on HHSJX. • Compact size enables easy installation or retrofit on most pipe systems.
HHSJ
HHSJ
Threaded/hex Brass or 316 Stainless Steel 1/4" to 2" NPT or BSPT (M)
HHSJX
Threaded/flats Cast 316 Stainless Steel 1/4" to 4" NPT or BSPT (M)
HHSJX
Threaded/hex Brass 3/8" to 2" NPT or BSPT (M)
Threaded/flats Cast 316 Stainless Steel 3/8" to 2" NPT or BSPT (M)
Optimization Tips
See Also
• See page B2 for optimization tips.
• Accessories – Adjustable ball fittings
Applications • Aerating
• Gas scrubbing, cooling
• Chemical processing
• Washing/rinsing
HHSJ
Threaded/round PVC or PTFE 1/4" to 4" NPT or BSPT (M)
HHSJX
Threaded/round PVC or Polypropylene 3/8" to 2" NPT or BSPT (M)
http://
– Pressure relief valves
– Check valves
– Solenoid valves
– Pressure gauges
– Split-eyelet connectors
– Pressure regulators
– Strainers
• Fire suppression/prevention
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B32
Performance Data HHSJ Inlet Conn. (in.)
*At the stated pressure in psi.
Spray Angle at 10 psi (°) 150
170
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
1/2
l
l
l
l
l
3/4
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
1/4
60
90
120
l
l
l
l
l
l
Capacity Size 07 13 20 07 13 20 30 40 53 82 120 164 210 210 340 470 640 820 960 1400 1780 2560 3360 5250
l l l
3/8
l
1 1-1/2 2 3 4
Orifice Dia. Nom. (in.)
Max. Free Passage Dia. (in.)
10
20
40
100
400
.094 .125 .156 .094 .125 .156 .188 .219 .250 .313 .375 .438 .500 .500 .625 .750 .875 1.000 1.125 1.375 1.500 1.750 2.000 2.500
.094 .125 .125 .094 .125 .125 .125 .125 .125 .125 .188 .188 .188 .188 .250 .250 .313 .313 .313 .438 .438 .563 .563 .625
.70 1.3 2.0 .70 1.3 2.0 3.0 4.0 5.3 8.2 12.0 16.4 21 21 34 47 64 82 96 140 178 256 336 525
.99 1.8 2.8 .99 1.8 2.8 4.2 5.7 7.5 11.6 17.0 23 30 30 48 66 91 116 136 198 252 362 475 742
1.4 2.6 4.0 1.4 2.6 4.0 6.0 8.0 10.6 16.4 24 33 42 42 68 94 128 164 192 280 356 512 672 1050
2.2 4.1 6.3 2.2 4.1 6.3 9.5 12.6 16.8 26 38 52 66 66 108 149 202 259 304 443 563 810 1063 1660
4.4 8.2 12.6 4.4 8.2 12.6 19.0 25 34 52 76 104 133 133 215 297 405 519 607 885 1126 1619 2125 3320
Capacity (gallons per minute)*
HHSJX Inlet Conn. (in.)
3/8
1/2 3/4 1 1-1/2 2
*At the stated pressure in psi.
Spray Angle at 10 psi (°) 90
120
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Capacity Size
Orifice Dia. Nom. (in.)
Max. Free Passage Dia. (in.)
30 40 53 82 120 164 210 340 470 640 820 960 1400 1780
.188 .219 .250 .313 .375 .438 .500 .625 .750 .875 1.000 1.125 1.375 1.500
.188 .219 .250 .313 .375 .438 .500 .625 .750 .875 1.000 1.125 1.375 1.500
Capacity (gallons per minute)* 10
20
40
100
400
3.0 4.0 5.3 8.2 12.0 16.4 21 34 47 64 82 96 140 178
4.2 5.7 7.5 11.6 17.0 23 30 48 66 91 116 136 198 252
6.0 8.0 10.6 16.4 24 33 42 68 94 128 164 192 280 356
9.5 12.6 16.8 26 38 52 66 108 149 202 259 304 443 563
19.0 25 34 52 76 104 133 215 297 405 519 607 885 1126
Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B33
Full Cone Nozzles
Spray Nozzles, Standard and Extra Large Free Passage Spray
Full Cone Nozzles
Spray Nozzles, Standard and Extra Large Free Passage Spray Dimensions and Weights Standard
Nozzle Type
HHSJ (M)
HHSJX (M)
Materials
Inlet Conn. (in.)
Length (in.)
Hex. (in.)
Net Weight (oz.)
1/4
2-1/8
9/16
1
Bar Stock:
3/8
2-3/8
11/16
1-3/4
Brass
Material
Nozzle Type
Material Code
HHSJ
HHSJX
(none)
l
l
1/2
3-1/8
7/8
3-1/2
Polypropylene
PP
3/4
3-7/16
1-1/16
5-3/8
Polyvinyl Chloride
PVC
l
1
4-9/16
1-3/8
10
PTFE
TEF
l
1-1/2
6-3/4
2
27
Cast:
2
6-7/8
2-1/2
35
SS
l
3
11-7/8
3-3/4
92
4
9
4-1/2
10-1/4 lbs.
3/8
2-3/4
7/8
3
1/2
3-3/8
1-1/16
4-1/2
3/4
4-5/8
1-3/8
8
1
5-1/8
1-3/4
18
1-1/2
6-3/4
2
30
2
11
3
88
316 Stainless Steel
l l
l
Other materials available upon request.
Ordering Info Standard Spray Nozzle
1/4
l
Based on largest/heaviest version of each type.
Inlet Conn.
HHSJ – SS
l
l
Nozzle Type
Material Code
3/8 HHSJX – SS
l
l
l
Inlet Conn.
Nozzle Type
Material Code
120
07
Spray Angle
Capacity Size
120
30
Spray Angle
Capacity Size
l
l
l
l
BSPT connections require the addition of a “B” prior to the inlet connection.
SpiralJet spray nozzles used to rinse wire coils in pickling line. Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B34
Features and Benefits • Solid cone-shaped spray pattern with round impact area and spray angles from 50° to 95° at 3 psi (0.2 bar). • Utilizes an internal vane that is cast as part of the nozzle. • Extra-large flow passages and a large open orifice to assure non-clogging operation. • Allows an operating range of 1 to 60 psi (0.1 to 4 bar) with a full cone spray pattern developing at 1 psi (0.1 bar). • 50° and 65° series have specially designed grooved orifices for accurate flow rates and spray angle control with their narrow sprays. (These grooves are not necessary for the 80° and 95° series, which have smooth orifices with somewhat larger diameters for the same flow rate.)
R
RR
2" to 8" NPT or BSPT (F) (80°/95° orifice shown)
2" to 8" NPT or BSPT (M) (50°/65° orifice shown)
Optimization Tips
See Also
• See page B2 for optimization tips.
• Accessories – Pressure gauges
Applications
RF
4" to 12" sizes Flange connection http://
– Strainers
• Chemical processing • Cooling/quenching • Deaeration • Deluging or flooding with large volumes of liquid • Fire suppression/prevention
DistriboJet spray nozzles used in wash station to clean fruit prior to processing. Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B35
Full Cone Nozzles
Spray Nozzles, Extra Large Free Passage Spray 50°/65°/80°/95°
Full Cone Nozzles
Spray Nozzles, Extra Large Free Passage Spray 50°/65°/80°/95° Performance Data *At the stated pressure in psi.
Nozzle Type Inlet Conn. (in.)
R
RR
RF
Inner Orifice Dia. Nom. (in.)
Orifice Dia. Nom. (in.)
45
1.0
45
1.063
45
Capacity Size
Spray Angle 50° 65° 80° 95° 50° 65° 80° 95° 50° 65° 80° 95° l
l l
l
2
l
l
l
l l
l
l l
l
l
2-1/2
l
l
l
l l
l
l l
l
l
3
l
l
l
l l
l
l l
l
l l
l
4
l l
l
l l
l l
l
l
l
l
l
l l
l l
l l
l l
l l
l
l
l l
l l
l
l
l
l
l
l
l
l l
l l
l
l l
l l
6
l
l l
5
l
l l
l
l
l l
l l
l l
l l
l l
l l
l
l
Capacity (gallons per minute)* 1
3
5
7
10
15
20
30
40
60
–
27
45
57
66
78
94
108
130
148
179
–
27
45
57
66
78
94
108
130
148
179
–
1.141
27
45
57
66
78
94
108
130
148
179
60
1.266
–
36
60
76
89
104
126
144
173
198
238
60
–
1.422
36
60
76
89
104
126
144
173
198
238
70
1.234
–
42
70
89
103
122
147
168
202
230
278
70
1.344
–
42
70
89
103
122
147
168
202
230
278
70
–
1.438
42
70
89
103
122
147
168
202
230
278
90
1.563
–
54
90
114
133
157
189
215
260
296
357
90
–
1.766
54
90
114
133
157
189
215
260
296
357
110
1.547
–
66
110
139
162
191
231
263
317
362
436
110
1.672
–
66
110
139
162
191
231
263
317
362
436
110
–
1.828
66
110
139
162
191
231
263
317
362
436
140
1.969
–
84
140
177
207
244
294
335
404
461
555
140
–
2.250
84
140
177
207
244
294
335
404
461
555
160
1.875
–
97
160
202
236
278
335
383
461
527
635
160
2.016
–
97
160
202
236
278
335
383
461
527
635
160
–
2.125
97
160
202
236
278
335
383
461
527
635
190
2.047
–
115
190
240
281
331
398
455
548
625
754
190
2.203
–
115
190
240
281
331
398
455
548
625
754
190
–
2.375
115
190
240
281
331
398
455
548
625
754
250
2.625
–
151
250
316
369
435
524
598
721
823
992
250
–
3.016
151
250
316
369
435
524
598
721
823
992
250
2.359
–
151
250
316
369
435
524
598
721
823
992
250
2.516
–
151
250
316
369
435
524
598
721
823
992
250
–
2.656
151
250
316
369
435
524
598
721
823
992
280
2.469
–
169
280
354
413
487
587
670
808
922 1111
280
2.656
–
169
280
354
413
487
587
670
808
922 1111
280
–
2.859
169
280
354
413
487
587
670
808
922 1111
380
3.219
–
229
380
481
561
661
797
909 1096 1251 1508
380
–
3.656
229
380
481
561
661
797
909 1096 1251 1508
360
2.828
–
217
360
455
532
626
755
862 1038 1185 1428
360
3.016
–
217
360
455
532
626
755
862 1038 1185 1428
360
–
3.188
217
360
455
532
626
755
862 1038 1185 1428
400
2.969
–
241
400
506
591
696
839
957 1154 1317 1587
400
3.188
–
241
400
506
591
696
839
957 1154 1317 1587
400
–
3.406
241
400
506
591
696
839
957 1154 1317 1587
560
3.922
–
338
560
708
827
974 1174 1340 1615 1844 2222
560
–
5.500
338
560
708
827
974 1174 1340 1615 1844 2222
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B36
Performance Data *At the stated pressure in psi.
Nozzle Type Inlet Conn. (in.)
R
RR
RF
Inner Orifice Dia. Nom. (in.)
Orifice Dia. Nom. (in.)
650
3.797
650
4.063
650
Capacity Size
Spray Angle 50° 65° 80° 95° 50° 65° 80° 95° 50° 65° 80° 95° l
l l
l l
l
l
l
8
l l
l l
l l
l l
l l
l
l l
1
3
5
7
10
15
20
30
40
60
–
392
650
822
960 1131 1363 1556 1875 2140 2579
–
392
650
822
960 1131 1363 1556 1875 2140 2579
–
4.344
392
650
822
960 1131 1363 1556 1875 2140 2579
750
4.047
–
452
750
949
1107 1305 1572 1795 2163 2469 2975
750
4.406
–
452
750
949
1107 1305 1572 1795 2163 2469 2975
750
–
4.781
452
750
949
1107 1305 1572 1795 2163 2469 2975
850
4.750
–
513
850
1075 1255 1479 1782 2034 2451 2798 3372
850
1075 1255 1479 1782 2034 2451 2798 3372
l
l
l
850
–
5.313
513
l
l
l
1000
–
6.250
603 1000 1265 1477 1740 2097 2393 2884 3292 3967 845 1400 1771 2067 2436 2935 3351 4038 4609 5554
1400
–
6.297
l
1600
–
6.859
965 1600 2024 2363 2784 3355 3829 4614 5267 6347
l
1700
–
7.188
1026 1700 2150 2510 2958 3564 4069 4903 5597 6744
l
1800
–
7.516
1086 1800 2277 2658 3132 3774 4308 5191 5926 7141
l
2000
–
8.219
1207 2000 2530 2953 3480 4193 4787 5768 6584 7934
l
2200
–
9.047
1327 2200 2783 3249 3828 4613 5265 6345 7243 8728
l
12
Dimensions and Weights Standard
Capacity (gallons per minute)*
Nozzle Type
R (F)
RR (M)
RF (Flange)
Materials
Inlet Conn. (in.)
Length (in.)
Dia. (in.)
Net Weight (oz.)
2 2-1/2 3 4 5 6 8 2 2-1/2 3 4 5 6 8 4 5 6 8 12
4-7/16 5-15/32 6-1/2 8-1/8 10-1/32 11-13/16 15-5/16 3-1/4 4 4-7/8 6-1/2 8-1/8 9-3/4 13 6-9/16 8-13/16 9-13/16 13 19-1/2
2-15/16 3-15/32 4-1/8 5 6-3/8 7-5/8 9-1/2 2-3/8 2-7/8 3-1/2 4-1/2 5-9/16 6-5/8 8-5/8 8-7/8 9-7/8 10-7/8 13-3/8 19
48 88 7-1/2 lbs. 13-1/2 lbs. 33 lbs. 38-1/2 lbs. 75 lbs. 32 84 92 10 lbs. 25 lbs. 29 lbs. 56 lbs. 23 lbs. 39 lbs. 45 lbs. 85 lbs. 110 lbs.
Nozzle Type
Material
Material Code
R
RR
RF
Brass
(none)
l
l
l
Cast Iron
l
l
l
l
316 Stainless Steel
SS
l
l
l
Other materials available upon request.
Ordering Info Standard Spray Nozzle
2
l
Inlet Conn.
RR – SS 50
l
l
l
Nozzle Type
Material Code
Spray Angle
45
l
Capacity Size
BSPT connections require the addition of a “B” prior to the inlet connection.
Based on largest/heaviest version of each type.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B37
Full Cone Nozzles
Spray Nozzles, Extra Large Free Passage Spray 50°/65°/80°/95°
Spray Nozzles, Maximum Free Passage Spray Full Cone Nozzles
Features and Benefits • Solid cone-shaped spray pattern with round impact area. • Patented vane design provides the largest free passage of any spray nozzle of its type. • Uniform full cone spray across the entire spray coverage area – no thick edges and light centers.
HMFP
HHMFP
3/8" to 1-1/4" NPT or BSPT (F)
3/8" to 1-1/4" NPT or BSPT (M)
Optimization Tips
See Also
• See page B2 for optimization tips.
• Accessories – Adjustable ball fittings
Applications • Aerating waste water treatment
• Fire suppression/prevention
• Cooling
• Gas scrubbing
• Dust control
• Washing coal, sand, gravel
Materials
http://
– Pressure relief valves
– Check valves
– Solenoid valves
– Pressure gauges
– Split-eyelet connectors
– Pressure regulators
– Strainers
Ordering Info Standard Spray Nozzle
Nozzle Type
Material
Material Code
HMFP
HHMFP
Brass
(none)
l
l
316 Stainless Steel
SS
l
l
Other materials available upon request.
3/4 HHMFP – SS 90
l
l
l
l
Inlet Conn.
Nozzle Type
Material Code
Spray Angle
70
l
Capacity Size
BSPT connections require the addition of a “B” prior to the inlet connection.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B38
Performance Data *At the stated pressure in psi.
Inlet Conn. (in.)
Nozzle Type
Body Style A or B
3/8
1/2
3/4
1
1-1/4
Capacity Size
Spray Angle (°)*
Max. Free Passage Dia. (in.)
60° Series
90° Series
115° Series
10
20
30
40
60
80
20
40
20
40
20
40
Capacity (gallons per minute)*
HMFP
HHMFP
A
l
l
14
.125
1.4
1.8
2.2
2.4
2.9
3.2
64
62
90
84
112
100
A
l
l
22
.156
2.2
2.9
3.4
3.8
4.5
5.1
64
62
90
84
112
100
B
l
l
32
.188
3.2
4.2
5.0
5.6
6.6
7.4
64
62
90
84
112
100
A
l
l
32
.188
3.2
4.2
5.0
5.6
6.6
7.4
64
62
90
84
112
100
B
l
l
51
.219
5.1
6.7
7.9
8.9
10.4
11.7
64
62
90
84
112
100
B
l
l
57
.250
5.7
7.5
8.8
9.9
11.7
13.1
64
62
90
84
112
100
A
l
l
70
.281
7.0
9.2
10.9
12.2
14.3
16.1
64
62
90
84
112
100
B
l
l
84
.313
8.4
11.1
13.0
14.6
17.2
19.3
64
62
90
84
112
100
B
l
l
100
.344
10.0
13.2
15.5
17.4
20
23
64
62
90
84
112
100
B
l
l
120
.375
12.0
15.8
18.6
21
25
28
64
62
90
84
112
100
B
l
l
120
.375
12.0
15.8
18.6
21
25
28
64
62
90
84
112
100
B
l
l
150
.406
15.0
19.5
23
25
30
33
64
62
90
88
115
105
B
l
l
170
.437
17.0
22
26
29
34
37
64
62
90
88
115
105
B
l
l
170
.437
17.0
22
26
29
34
37
64
62
90
88
115
105
B
l
l
200
.469
20
26
30
34
40
44
64
62
90
88
115
105
B
l
l
220
.500
22
29
33
37
43
48
64
62
90
88
115
105
B
l
l
240
.531
24
31
36
41
47
53
64
62
90
88
115
105
B
l
l
260
.562
26
34
39
44
51
57
64
62
90
88
115
105
Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.
Dimensions and Weights Standard
Nozzle Type
HMFP (F)
Inlet Conn. (in.)
Body Style
Length (in.)
Hex. (in.)
Net Weight (oz.)
Inlet Conn. (in.)
Body Style
Length (in.)
Hex. (in.)
Net Weight (oz.)
3/8
A
1-15/32
13/16
3/8
B
1-45/64
13/16
2-3/8
3/8
2-1/2
3/8
A
1
11/16
1-3/8
B
1-45/64
3/4
1/2
A
1-49/64
1
4-1/2
2
1/2
A
1-7/32
7/8
2-3/8
1/2
B
3/4
A
2-1/8
1
2-13/16
1-1/4
4-5/8
1/2
B
2-3/16
1
4-7/8
8-7/8
3/4
A
1-7/32
1-1/8
3/4
B
2-5/8
5
1-3/8
12-5/8
3/4
B
2-45/64
1-3/8
11-1/2
3/4 3/4
B B
2-7/8
1-3/8
13-1/4
3/4
B
2-31/32
1-3/8
12-1/8
3-1/32
1-3/8
12-7/8
3/4
B
3-1/16
1-3/8
1
B
11-1/2
3-1/4
1-3/4
22-1/2
1
B
3-1/4
1-3/4
1
22-1/2
B
3-1/4
1-3/4
20-7/8
1
B
3-1/4
1-3/4
19-1/4
1
B
3-1/4
1-3/4
20-7/8
1
B
3-1/4
1-3/4
19-1/4
1-1/4
B
3-3/4
2
30-1/2
1-1/4
B
3-3/4
2
32
1-1/4
B
3-3/4
2
28-7/8
1-1/4
B
3-3/4
2
27-1/4
1-1/4
B
3-3/4
2
27-1/4
1-1/4
B
3-3/4
2
27-1/4
1-1/4
B
3-3/4
2
27-1/4
1-1/4
B
3-3/4
2
25-5/8
1-1/4
B
3-3/4
2
27-1/4
1-1/4
B
3-3/4
2
25-5/8
Standard
Nozzle Type
HHMFP (M)
Based on largest/heaviest version of each type.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B39
Full Cone Nozzles
Spray Nozzles, Maximum Free Passage Spray
Spray Nozzles, Vaneless Spray
Full Cone Nozzles
Features and Benefits • Solid cone-shaped spray pattern with round impact area. • Completely unrestricted internal flow passages with no vane. • Coarse spray is projected from the nozzle at an axis 90° from the axis of the nozzle inlet.
GANV
GGANV
Vaneless/removable cap 1/4" to 1/2" NPT or BSPT (F)
Vaneless/removable cap 1/4" to 1/2" NPT or BSPT (M)
Optimization Tips
See Also
• See page B2 for optimization tips.
• Accessories – Adjustable ball fittings
Applications
http://
– Pressure relief valves
– Check valves
– Solenoid valves
– Pressure gauges
– Strainers
– Pressure regulators
• Cooling of primary metals and other materials • Creating and dispersing drops in chemical reaction processing • Deluging combustible materials and storage tanks for fire suppression/prevention • Dust control • Foam break-up, aeration, deaeration • Washing/rinsing
Filter washing application uses vaneless FullJet spray nozzles to remove waste. Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B40
Performance Data GANV, GGANV Inlet Conn. (in.)
1/4
3/8
1/2
*At the stated pressure in psi.
Orifice Dia. Nom. (in.)
Max. Free Passage Dia. (in.)
5
7
10
15
20
30
40
60
80
100
7
20
80
5
.109
.078
.35
.42
.50
.61
.71
.87
1.0
1.2
1.4
1.6
68
75
82
7
.125
.094
.49
.59
.70
.86
.99
1.2
1.4
1.7
2.0
2.2
68
75
82
8
.156
.109
.57
.67
.80
.98
1.1
1.4
1.6
2.0
2.3
2.5
75
80
85
10
.156
.125
.71
.84
1.0
1.2
1.4
1.7
2.0
2.4
2.8
3.2
75
80
85
11
.156
.141
.78
.92
1.1
1.3
1.6
1.9
2.2
2.7
3.1
3.5
75
80
85
11
.172
.125
.78
.92
1.1
1.3
1.6
1.9
2.2
2.7
3.1
3.5
75
85
83
13
.172
.141
.92
1.1
1.3
1.6
1.8
2.3
2.6
3.2
3.7
4.1
75
85
83
16
.172
.156
1.1
1.3
1.6
2.0
2.3
2.8
3.2
3.9
4.5
5.1
75
85
83
20
.219
.172
1.4
1.7
2.0
2.4
2.8
3.5
4.0
4.9
5.7
6.3
75
85
83
23
.219
.188
1.6
1.9
2.3
2.8
3.3
4.0
4.6
5.6
6.5
7.3
75
85
83
26
.234
.203
1.8
2.2
2.6
3.2
3.7
4.5
5.2
6.4
7.4
8.2
75
85
83
29
.234
.219
2.1
2.4
2.9
3.6
4.1
5.0
5.8
7.1
8.2
9.2
75
85
83
33
.297
.234
2.3
2.8
3.3
4.0
4.7
5.7
6.6
8.1
9.3
10.4
75
85
83
32
.313
.203
2.3
2.7
3.2
3.9
4.5
5.5
6.4
7.8
9.1
10.1
85
90
95
40
.313
.234
2.8
3.3
4.0
4.9
5.7
6.9
8.0
9.8
11.3
12.6
85
90
95
48
.313
.281
3.4
4.0
4.8
5.9
6.8
8.3
9.6
11.8
13.6
15.2
85
90
95
56
.391
.297
4.0
4.7
5.6
6.9
7.9
9.7
11.2
13.7
15.8
17.7
85
90
95
64
.391
.328
4.5
5.4
6.4
7.8
9.1
11.1
12.8
15.7
18.1
20
85
90
95
72
.391
.359
5.1
6.0
7.2
8.8
10.2
12.5
14.4
17.6
20
23
85
90
95
Capacity Size
Spray Angle (°)*
Capacity (gallons per minute)*
Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.
Dimensions and Weights Angle Type
Nozzle Type
GANV (F)
GGANV (M)
Materials
Inlet Conn. (in.)
A (in.)
B (in.)
C (in. sq.)
D (in.)
L (in.)
Net Weight (oz.)
1/4
9/16
7/8
3/4
15/16
1-1/4
2-3/4
3/8
11/16
31/32
7/8
1-1/8
1-13/32
3-3/4
1/2
25/32
1-5/16
1
1-9/32
1-13/16
5-5/8
1/4
9/16
7/8
3/4
15/16
1-1/4
2-1/2
3/8
11/16
31/32
7/8
1-1/8
1-13/32
3-1/2
1/2
25/32
1-3/8
1
1-9/32
1-7/8
5-3/8
Based on largest/heaviest version of each type.
Nozzle Type
Material
Material Code
GANV
GGANV
Brass
(none)
l
l
303 Stainless Steel
SS
l
l
Other materials available upon request.
Ordering Info Standard Spray Nozzle
1/4 GANV – SS
l
l
l
Inlet Conn.
Nozzle Type
Material Code
10
l
Capacity Size
BSPT connections require the addition of a “B” prior to the inlet connection.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B41
Full Cone Nozzles
Spray Nozzles, Vaneless Spray
Spray Nozzles, Square Spray
Full Cone Nozzles
Features and Benefits • Solid cone-shaped spray pattern with square impact area and spray angles of 40° to 102° at 7 psi (0.5 bar). • Unique vane design with large flow passages provides superior spray control over a wide range of pressures and flow rates. • Uniform spray across their entire spray area. • Ideal for installations requiring complete coverage of rectangular areas or spray zones. • Removable caps and vanes for easy inspection and cleaning on many models.
G-SQ
GG-SQ
Removable cap and vane 1/8" to 1/2" NPT or BSPT (F)
H-SQ
Removable cap and vane 1/8" to 1/2" NPT or BSPT (M)
H-SQ
One-piece body 1" NPT or BSPT (F)
Removable vane/cast body 1-1/4" to 6" NPT or BSPT (F)
Optimization Tips
See Also
• See page B2 for optimization tips.
• Accessories – Adjustable ball fittings
Applications • Air and gas washers
• Liquor washers
• Cooling/quenching
• Product washing/rinsing
• Dust control
• Scrubbers
HH-SQ
One-piece body 1/8" to 3/4" NPT or BSPT (M)
http://
– Pressure relief valves
– Check valves
– Solenoid valves
– Pressure gauges
– Split-eyelet connectors
– Pressure regulators
– Strainers
• Fire suppression/prevention
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B42
Performance Data *At the stated pressure in psi.
Inlet Conn. (in.)
1/8
1/4 3/8
Nozzle Type
Capacity Size
G-SQ GG-SQ HH-SQ H-SQ
Orifice Dia. Nom. (in.)
Max. Free Passage Dia. (in.)
5
7
10
20
30
40
60
80
100
150
7
20
80
Spray Angle (°)*
Capacity (gallons per minute)*
l
l
l
3.6SQ
.063
.050
.26
.31
.36
.50
.60
.68
.82
.94
1.0
1.3
40
52
47
l
l
l
4.8SQ
.078
.050
.35
.41
.48
.66
.80
.91
1.1
1.2
1.4
1.7
48
63
57
l
l
l
6SQ
.094
.050
.44
.51
.60
.83
.99
1.1
1.4
1.6
1.7
2.1
60
66
60
l
l
l
10SQ
.109
.063
.73
.85
1.0
1.4
1.7
1.9
2.3
2.6
2.9
3.5
62
67
61
l
l
l
12SQ
.125
.063
.87
1.0
1.2
1.7
2.0
2.3
2.7
3.1
3.5
4.2
70
75
68
l
14.5SQ
.154
.063
1.1
1.2
1.5
2.0
2.4
2.7
3.3
3.8
4.2
5.0
78
82
75
5.2
6.3
71
75
68
l
l
l
18SQ
.156
.094
1.3
1.5
1.8
2.5
3.0
3.4
4.1
4.7
l
l
l
29SQ
.219
.125
2.1
2.5
2.9
4.0
4.8
5.5
6.6
7.5
8.4
10.1
71
75
68
l
36SQ
.250
.125
2.6
3.1
3.6
5.0
6.0
6.8
8.2
9.4
10.4
12.5
78
82
75
3/4
l
50SQ
.266
.172
3.6
4.2
5.0
6.9
8.3
9.5
11.4
13.0
14.4
17.4
71
75
68
1
l
l
106SQ
.391
.219
7.7
9.0
10.6
14.6
17.6
20
24
28
31
37
78
80
73
1-1/4
l
177SQ
.500
.250
12.9
15.0
17.7
24
29
33
40
46
51
62
78
80
73
1-1/2
l
230SQ
.563
.344
16.7
19.5
23
32
38
44
52
60
66
80
73
77
70
l
290SQ
.609
.438
21
25
29
40
48
55
66
75
84
101
66
70
64
l
360SQ
.687
.438
26
31
36
50
60
68
82
94
104
125
70
74
67
l
480SQ
.828
.438
35
41
48
66
80
91
109
125
138
167
79
82
74
l
490SQ
.781
.563
36
42
49
67
81
93
112
128
141
170
62
67
61
l
590SQ
.875
.563
43
50
59
81
98
112
135
154
170
205
75
78
71
l
950SQ
1.125
.688
69
81
95
131
157
180
217
247
274
330
81
84
76
5
l
2980SQ
1.875
1.125
217
253
298
410
494
564
679
776
859
1036
89
91
83
6
l
5690SQ
3.219
1.750
414
483
569
783
943
1077 1297 1481
1641
1977
102
105
95
1/2
2
2-1/2
Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B43
Full Cone Nozzles
Spray Nozzles, Square Spray
Full Cone Nozzles
Spray Nozzles, Square Spray
Dimensions and Weights Standard
Nozzle Type
G-SQ (F)
GG-SQ (M)
HH-SQ (M)
H-SQ Bar Stock (F)
H-SQ Cast (F)
Materials
Inlet Conn. (in.)
Length (in.)
Dia. (in.)
Net Weight (oz.)
1/8
1-7/32
9/16 hex.
1
1/4
1-15/32
11/16 hex.
1-1/2
Material
Brass Mild Steel
l
l
l
316 Stainless Steel
316SS
l
l
l
1/8
7/8
1/2
1/2
Brass
1/2
Cast Iron
1-3/8
13/16
1-1/2
1-19/32
1-1/16
3-1/2
1
2-3/4
1-1/2
13
1-1/4
3-7/16
2-1/16
20
1-1/2
4-1/16
2-5/16
28
2
5-7/16
3
60
l
l
Polyvinyl Chloride
3/4
l
l
1-1/2
1/2
l l
11/16 hex.
1
l
l
1-9/16
21/32
(none)
l
1/4
1-3/16
H-SQ
l
3/4
3/8
HH-SQ
SS
9/16 hex.
17/32
GG-SQ
303 Stainless Steel 1-9/32
29/32
G-SQ
Bar Stock:
1/8
1/4
Nozzle Type
Material Code
PVC
l
Cast:
316 Stainless Steel
(none)
l
l
l
SS
l
Other materials available upon request.
Ordering Info Standard Spray Nozzle
2-1/2
6-7/8
3-7/16
76
5
12-1/4
6-3/4 oct.
38 lbs.
6
14-3/8
8 oct.
53 lbs.
Based on largest/heaviest version of each type.
1/4
G
Inlet Conn.
Nozzle Type
l
l
– SS
l
Material Code
12SQ
l
Capacity Size
BSPT connections require the addition of a “B” prior to the inlet connection.
Extruded aluminum pipe and tubing are cooled with FullJet spray nozzles. Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B44
Spray Nozzles, Square Spray
Features and Benefits • Rectangular and/or square spray with spray angles from 40° to 78° at 7 psi (0.5 bar). • Integral cap and non-removable vane. • Fast and easy installation of spray tips without tools. • Automatic alignment.
• Lower cost – nozzle body can be reused – only spray tips are replaced. • Ideal for installations requiring uniform coverage of rectangular and/or square area. • Standard Quick FullJet nozzle assemblies: – Nozzle body, spray tip with integral seal.
Standard QuickJet® Bodies
Quick FullJet Spray Tips
• QJA female and QJJA male inlet connections
Quick FullJet nozzles are comprised of two components, a body and a spray tip. QHA-SQ and QLHA-SQ are the two spray tips available. Each of these spray tips are compatible with either the male or female bodies.
• QJLA female and QJJLA male inlet connections
QHA-SQ
QLHA-SQ
QJA and QJLA female bodies or
Standard connection
Large connection
QJJA and QJJLA male bodies
Spray tip
Optimization Tips
See Also
• See page B2 for optimization tips.
• Accessories – QuickJet adjustable ball fitting bodies
– QuickJet nozzle system plugs
– QuickJet nozzle system adapters
– UniJet® nozzle system adapter for QuickJet systems
Applications • Cooling/quenching
• Liquor washers
• Dust control
• Product washing/rinsing
• Fire suppression/prevention
• Scrubbers
http://
– QuickJet split-eyelet bodies
• Gas scrubbing, washing, cooling
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B45
Full Cone Nozzles
Quick
Full Cone Nozzles
Quick
Spray Nozzles, Square Spray
Performance Data *At the stated pressure in psi.
Body Inlet Conn. (in.)
Quick FullJet Tip Type QHA-SQ
1/8, 1/4, 3/8, 1/2
1/4, 3/8, 1/2
Capacity Size
QLHA-SQ
Orifice Dia. Nom. (in.)
Max. Free Passage Dia. (in.)
5
7
10
20
30
40
60
80
100
150
7
20
80
Spray Angle (°)*
Capacity (gallons per minute)*
l
3.6SQ
.063
.050
.26
.31
.36
.50
.60
.68
.82
.94
1.0
1.3
40
52
47
l
6SQ
.094
.050
.44
.51
.60
.83
.99
1.1
1.4
1.6
1.7
2.1
60
66
60
l
10SQ
.109
.063
.73
.85
1.0
1.4
1.7
1.9
2.3
2.6
2.9
3.5
62
67
61
l
12SQ
.125
.063
.87
1.0
1.2
1.7
2.0
2.3
2.7
3.1
3.5
4.2
70
75
68
l
14.5SQ
.156
.063
1.1
1.2
1.5
2.0
2.4
2.7
3.3
3.8
4.2
5.0
78
82
75
3/8, 1/2
l
18SQ
.156
.094
1.3
1.5
1.8
2.5
3.0
3.4
4.1
4.7
5.2
6.3
71
75
68
1/2
l
36SQ
.250
.125
2.6
3.1
3.6
5.0
6.0
6.8
8.2
9.4
10.4
12.5
78
82
75
Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.
Dimensions and Weights Standard
Body Types
Nozzle Type
Length (in.)
Hex. (in.)
Net Weight (oz.)
QJA+QHA-SQ
1-15/16
1
3-1/2
QJJA+QHA-SQ
1-27/32
1
3-1/2
QJLA+QLHA-SQ
2-7/32
1-1/8
5
QJJLA+QLHA-SQ
2-1/4
1-1/8
4-1/2
Inlet Conn. (in.)
Standard Body Conn. F QJA
Conn. M
QJLA
QJJA QJJLA
1/8
l
1/4
l
3/8
l
l
l
l
1/2
l
l
l
l
l l
Based on largest/heaviest version of each type.
Materials
Ordering Info Quick FullJet Complete Nozzle
Spray Tip
Material
Material Code
QHA-SQ
QLHA-SQ
Brass
(none)
l
l
303 Stainless Steel
SS
l
l
Nozzle Body
Spray Tip
3/8 QJA – SS + QHA – SS 12SQ
Standard Quick FullJet nozzles available in either brass with a Buna-N seal or stainless steel with a Viton® seal.
l
l
l
l
l
l
Inlet Conn.
Body Type
Material Code
Tip Type
Material Code
Capacity Size
BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B46
Features and Benefits • Solid cone-shaped spray pattern with square impact area. • Medium- to large-sized drops. • Quick and easy spray tip replacement – remove tips by unscrewing the retainer cap.
• A large choice of interchangeable spray tips, body types/sizes, materials, spray patterns, spray angles, accessories. • UniJet nozzle options: – Nozzle body, spray tip, tip retainer.
• Lower cost – nozzle body can be reused – only spray tips are replaced.
Standard UniJet Bodies
UniJet Spray Tip
• T female or TT male inlet connections
A typical UniJet assembly will consist of a T female body or TT male body, spray tip and tip retainer.
TG-SQ
T female body or
Standard spray tip TT male body
Spray tip
Tip retainer
Optimization Tips
See Also
• See page B2 for optimization tips.
• Accessories
Applications
– Adjustable mounting clamp nozzle bodies
– Rollover nozzle bodies
– Ball valve nozzle bodies
– Strainers
• Cooling primary metals and other materials
– Check valves
• Creation and dispersion of drops in chemical reaction processing
– Plates, tip retainers, adapters
• Dust control • Foam break-up, aeration, deaeration • Gas scrubbing, washing, cooling • Washing/rinsing
http://
– Split-eyelet bodies – Swivel nozzle bodies
– Plug valve nozzle bodies • FullJet® Maximum Free Passage spray nozzles for applications prone to clogging • SpiralJet® spray nozzles for maximum liquid throughput • Kynar® Quick FullJet spray nozzles for strippers, etchers, developers (See Section K, Special Purpose Spray Nozzles) Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B47
Full Cone Nozzles
Spray Nozzles, Square Spray
Full Cone Nozzles
Spray Nozzles, Square Spray
Performance Data TG-SQ Body Inlet Conn. (in.)
*At the stated pressure in psi.
Orifice Dia. Nom. (in.)
Max. Free Passage Dia. (in.)
5
7
10
20
30
40
60
80
100
150
7
20
80
6SQ
.094
.050
.44
.51
.60
.83
.99
1.1
1.4
1.6
1.7
2.1
60
66
60
8SQ
.099
.050
.58
.68
.80
1.1
1.3
1.5
1.8
2.1
2.3
2.8
70
75
68
10SQ
.109
.063
.73
.85
1.0
1.4
1.7
1.9
2.3
2.6
2.9
3.5
62
66
60
12SQ
.125
.063
.87
1.0
1.2
1.7
2.0
2.3
2.7
3.1
3.5
4.2
70
75
68
18SQ
.156
.094
1.3
1.5
1.8
2.5
3.0
3.4
4.1
4.7
5.2
6.3
71
75
68
Capacity Size
1/4
3/8
Spray Angle (°)*
Capacity (gallons per minute)*
Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging. Other body types may be available. Contact representative for further information.
Dimensions and Weights Nozzle Type
Standard
Length (in.)
T+TG-SQ TT+TG-SQ
Materials
Hex. (in.)
3
13/16
Net Weight (oz.)
2-1/2
Material
Material Code
Spray Tip
Brass
(none)
l
303 Stainless Steel
SS
l
TG-SQ
Other materials available upon request.
Based on largest/heaviest version of each type.
Ordering Info UniJet Complete Nozzle Nozzle Body
1/4
T
Inlet Conn.
Body Type
l
l
–
Spray Tip
SS
l
Material Code
+
TG
l
Tip Type
–
SS
12SQ
Material Code
Capacity Size
l
l
BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B48
Spray Nozzles, Oval Spray
Full Cone Nozzles
Features and Benefits • Solid cone-shaped spray pattern with oval impact area that has a width approximately one half of its length. • Removable caps and vanes for easy inspection and cleaning. • Unique internal vane with large flow passages and superior spray pattern control characteristics.
G-VL
GG-VL
Removable cap and vane 3/8" NPT or BSPT (F)
Removable cap and vane 3/8" NPT or BSPT (M)
Optimization Tips
See Also
• See page B2 for optimization tips.
• Accessories – Adjustable ball fittings
Applications
http://
– Pressure relief valves
– Check valves
– Solenoid valves
– Pressure gauges
– Strainers
– Pressure regulators
• Air and gas washers
• Liquor washers
• Cooling/quenching
• Product washing/rinsing
• Dust control
• Scrubbers
• Fire suppression/prevention
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B49
Full Cone Nozzles
Spray Nozzles, Oval Spray
Performance Data G-VL, GG-VL Inlet Conn. (in.)
3/8
*At the stated pressure in psi.
Spray Angle (°)*
Capacity (gallons per minute)*
Max. Free Passage Dia. (in.)
15
30
40
60
80
100
150
4.9VL
.040
.59
.81
.93
1.1
1.3
1.4
6.5VL
.050
.78
1.1
1.2
1.5
1.7
1.9
8.1VL
.050
.98
1.3
1.5
1.8
2.1
9.2VL
.050
1.1
1.5
1.7
2.1
2.4
Capacity Size
15
40
100
150
A°
B°
A°
B°
A°
B°
A°
B°
1.7
104
66
90
60
86
52
83
47
2.3
106
64
95
60
85
50
81
45
2.3
2.8
102
64
100
65
84
50
80
45
2.7
3.2
103
65
100
65
86
51
81
46
Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.
Dimensions and Weights Standard
Inlet Conn. (in.)
3/8
Length (in.)
1-1/2
Hex. (in.)
13/16
Net Weight (oz.)
2
Materials Material
Ordering Info
Material Nozzle Type Code G-VL GG-VL
Brass
(none)
l
l
303 Stainless Steel
SS
l
l
Other materials available upon request.
Standard Spray Nozzle
3/8
G
Inlet Conn.
Nozzle Type
l
l
– SS
l
Material Code
4.9VL
l
Capacity Size
BSPT connections require the addition of a “B” prior to the inlet connection.
Based on largest/heaviest version.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B50
Spray Nozzles, Wide Angle Square Spray Full Cone Nozzles
Features and Benefits • Solid wide angle cone-shaped spray pattern with square impact area and spray angles from 101° to 115° at 10 psi (0.7 bar). • Unique vane design provides uniform spray distribution. • Ideal for installations requiring uniform coverage of rectangular and/or square areas. • Sizes 1-1/4" and larger are cast-type nozzles with removable vanes.
H-WSQ
One-piece body 3/4" to 1" NPT or BSPT (F)
H-WSQ
HH-WSQ
Removable vane/cast body 1-1/4" to 3" NPT or BSPT (F)
Optimization Tips
One-piece body 1/4" to 1" NPT or BSPT (M)
Materials
• See page B2 for optimization tips.
H-WSQ
HH-WSQ
(none)
l
l
l
l
l
303 Stainless Steel
SS
l
l
316 Stainless Steel
316SS
l
l
Bar Stock:
Applications
Brass Mild Steel
• Air and gas washers
• Liquor washers
• Cooling/quenching
• Product washing/rinsing
• Dust control
• Scrubbers
Polyvinyl Chloride
PVC
l
Cast:
• Fire suppression/prevention
Brass
(none)
l
l
l
SS
l
Cast Iron
See Also • Accessories – Adjustable ball fittings
Nozzle Type
Material Code
Material
http://
– Pressure relief valves
– Check valves
– Solenoid valves
– Pressure gauges
– Split-eyelet connectors
– Pressure regulators
– Strainers
316 Stainless Steel
Other materials available upon request.
Ordering Info Standard Spray Nozzle
1/4 HH – SS 14WSQ
l
l
l
l
Inlet Conn.
Nozzle Type
Material Code
Capacity Size
BSPT connections require the addition of a “B” prior to the inlet connection.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B51
Full Cone Nozzles
Spray Nozzles, Wide Angle Square Spray Performance Data *At the stated pressure in psi.
Inlet Conn. (in.)
Nozzle Type H-WSQ
1/4
3/8
1/2
Capacity Size
HH-WSQ
Orifice Dia. Nom. (in.)
Max. Free Passage Dia. (in.)
5
7
10
15
20
30
40
60
80
5
10
80
Spray Angle (°)*
Capacity (gallons per minute)*
l
14WSQ
.141
.063
1.0
1.2
1.4
1.7
1.9
2.3
2.6
3.1
3.5
99
101
93
l
17WSQ
.156
.063
1.3
1.5
1.7
2.0
2.3
2.8
3.1
3.7
4.2
99
101
93
l
20WSQ
.172
.094
1.5
1.7
2.0
2.4
2.7
3.2
3.7
4.4
5.0
104
110
94
l
24WSQ
.188
.094
1.8
2.1
2.4
2.9
3.3
3.9
4.4
5.3
6.0
104
110
94
l
27WSQ
.203
.109
2.0
2.3
2.7
3.2
3.7
4.4
5.0
5.9
6.7
104
110
98
l
30WSQ
.219
.109
2.2
2.6
3.0
3.6
4.1
4.9
5.5
6.6
7.5
104
110
102
l
35WSQ
.234
.125
2.6
3.0
3.5
4.2
4.7
5.7
6.4
7.7
8.7
104
110
102
l
40WSQ
.250
.125
2.9
3.4
4.0
4.8
5.4
6.5
7.4
8.8
10.0
104
110
102
l
45WSQ
.250
.141
3.3
3.8
4.5
5.4
6.1
7.3
8.3
9.9
11.2
104
110
102
l
50WSQ
.266
.156
3.7
4.3
5.0
6.0
6.8
8.1
9.2
11.0
12.5
104
110
102
5.2
6.1
7.1
8.5
9.6
11.5
13.1
15.6
17.7
105
110
102
3/4
l
l
71WSQ
.391
.172
l
1
l
130WSQ
.516
.219
9.6
11.1
13.0
15.5
17.6
21
24
29
32
107
110
107
1-1/4
l
190WSQ
.609
.219
14.0
16.2
19.0
23
26
31
35
42
47
108
111
109
1-1/2
l
290WSQ
.719
.313
21
25
29
35
39
47
53
64
72
109
114
109
2
l
560WSQ
.984
.438
41
48
56
67
76
91
103
123
140
110
114
109
2-1/2
l
830WSQ
1.250
.563
61
71
83
99
113
135
153
183
207
110
115
109
3
l
1070WSQ
1.375
.688
79
91
107
128
145
174
197
235
267
110
115
109
Maximum Free Passage Diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging.
Dimensions and Weights Standard
Nozzle Type H-WSQ Bar Stock (F)
H-WSQ Cast (F)
HH-WSQ (M)
Inlet Conn. (in.)
Length (in.)
Dia. (in.)
Net Weight (oz.)
3/4
2-3/16
1-1/4
7-3/8
1
2-3/4
1-1/2
13
1-1/4
3-7/16
2-1/16
20
1-1/2
4-1/16
2-5/16
28
2
5-7/16
3
60
2-1/2
6-7/8
3-7/16
76
3
7-23/32
4-1/8
96
1/4
29/32
17/32
1/2
3/8
1-3/16
21/32
1
1/2
1-3/8
13/16
1-1/2
3/4
1-19/32
1-1/16
3-1/2
1
2-3/32
1-5/16
7
Based on largest/heaviest version of each type.
Phone 1-800-95-spray, FAX 1-888-95-spray Visit Our Web Site: www.spray.com, Email:
[email protected]
B52