RT SERIES SYSTEM ENCLOSURES
RT SERIES SYSTEM ENCLOSURES AND ACCESSORIES
COMPANY OVERVIEW Rack Technologies Company Capabilities Company Introduction RT Series Cabinet Specifications Class C&B Endorsed Cabinets iQ Series Cabinets Industrial Cabinets IP Code Data Centre Intelligent Power Distribution Products UPS Protection Rack Fundamentals RT Seismic Rated
freestanding cabinets Design Your Cabinet RT Series II - 600 Wide Cabinet RT Series II - 800 Wide Cabinet High Density Cabling Cabinet Cable Cabinet (offset) - 800 Wide Cabinet Fibre Telco Cabinet Acoustic Cabinet Intelligent In-Cabinet Cooling System Freestanding Accessories Freestanding Gallery
PAGE 3 4 6 7 8 9 10 12 13 14 15 16 18
PAGE 20 22 24 26 28 30 31 32 34 56
SPLIT (colo) CABINETS Split Cabinets - 600 and 800 Wide Cabinets Split Cabinet Gallery
WALL CABINETS
PAGE 58 60
PAGE
WR Wall Rack Blank Page Wall Frames - 600 Wide Wall Cabinet Accessories
62 66 67 68
OPEN FRAME racks
PAGE
RT Open Frame Series iQ Open Frame Series Open Frame Gallery
74 75 76
CABLE MANAGEMENT Cable Managers
78
Index
PAGE
iQ Cable Capacity Table Part Number Index Terms and Conditions of Sale
What is a QR code? QR is short for Quick Response. Mobile phones can read QR codes quickly, take information from a transitory media and receive it immediately.
PAGE
88 89 92
1. Download a free QR code reader from either the App Store for (iPhones) or Android Market for (Android phones). 2. Scan the desired QR code with your mobile. 3. Click the link to start your download.
Preformed LINE PRODUCTS
Preformed Line Products Company 660 Beta Drive Cleveland, Ohio 44143 Ph: 440.461.5200 Fax: 440.442.8816 E-mail:
[email protected]
Preformed Line Products is a leading international supplier of high quality cable hardware and fittings, overhead and underground copper and fibre splice cases, data communication products, racks and cabinets. PLP serves energy, data and communications industry customers worldwide, through strategically located manufacturing facilities in Australia, Brazil, Canada, China, Japan, Mexico, New Zealand, South Africa. Spain, the United Kingdom and the United States of America.
Preformed products have manufactured in Australia since 1962, initially under licence, until PLP (Australia) became a wholly owned subsidiary in 1978. Products from the Australian operation have been used in many major power transmission, power distribution and communications sectors.
The parent company was formed in Cleveland, Ohio, USA in 1947, following Thomas F. Peterson’s invention of the Preformed Armour Rod, which remains the industry standard today.
PLP CORE MARKETs COMMUNICATIONS
ENERGY
SPECIAL INDUSTRIES
SOLAR
DATA ENCLOSURES
switchgear and protection
RACK TECHNOLOGIES Rack Technologies was founded in Sydney, Australia on March 15th 1990 and was acquired by Preformed Line Products (Australia) Pty Limited on 1st April, 2000. The company is a specialist manufacturer of rack system enclosures and accessories for the communications, data centres, electronic, security and electrical industries. Rack Technologies has emerged as one of Australia and New Zealand’s largest manufacturers of system enclosures and accessories. Rack Technologies maintains a dominant position in most markets in which it operates. Significant resources are being deployed in all operational areas to facilitate continued growth and expansion. The company has design as well as manufacturing capabilities, aimed at the production of special cabinets to suit particular projects and to satisfy the unique requirements of end users.
Mr. Malcolm Stewart Managing Director PLP Australia
A full range of enclosures designed to service the day-to-day requirements of customers is also produced. The philosophy of Rack Technologies is founded on the principles of quality, service and attention to detail. We aim to transform these values into unique and dynamic outcomes that are second-to-none. In order to attain and maintain the above objectives, Rack Technologies relies on the implementation of a Certified Quality Management System with the requirement of AS/NZS ISO 9001-2008. Rack Technologies enclosures comply with International Standard IEC297.
www.racktechnologies.com.au
COMPANY CAPABILITIES Aluminium Die-Casting
Plastic Extrusion
Aluminium/stainless Steel Welding
To meet the need for both short lead times and guaranteed strength, PLP has invested in an in-house aluminium casting facility, complementing its diverse range of products. Daily testing and a rigorous assessment system, aim to ensure the consistent quality of final products. Most casting processes use alloys, of CC401 and 601 grades.
In many situations, our market requires plastic extruded, rather then injection moulded products. Where plastic extrusions are required, PLP offers a full range of extrusion capabilities, enabling the creation of products suited to full outdoor use, in both hollow and solid sections.
Utilising both MIG and TIG welding, PLP manufactures everything from simple steel “Eye-Nuts” to complex aluminium busbars, which are required for major substations. All PLP welders are trained and certified in the welding of busbar and compression terminals. As part of the PLP training program, certification includes confirmation by X-Ray and weld testing.
Sheet Metal Fabrication
Tool Design and Manufacturing
Powder Coating
PLP has a range of CNC-turret presses, brake presses and spot welders, as well as a powder coating line. These, combined with our highly motivated engineering team, enable us to offer our customers a complete solution to their sheet metal needs, regardless of whether they seek a steel computer rack or individual sheet metal components. Materials predominantly utilised range from stainless steel and aluminium to various zinc seals and galvanised metals.
To enable a highly diverse and flexible manufacturing environment, combined with quick turnaround on tooling, PLP employs a tooling design department. It utilises equipment such as its recently acquired CNC machining centre, EDM and wire cut machines, coupled with sophisticated CAD/ CAM systems. PLP manufactures all forging, wire forming and aluminium die-casting tools, as well as plastic moulding dies.
The most recent addition to the broad range of PLP’s in-house capabilities is the new powder coating line, which uses the most recent technology available. This powder coating capability permits products to be manufactured, coated and packed without leaving the facility. This reduces the amount of transport involved in the process and consequently decreases the associated risks of aesthetic damage and extended lead times.
Wire Forming
Ferrous Non-Ferrous Forging
Precision Engineering
To respond quickly to both large and small volume requirements, PLP’s wire-forming section has reduced set up times. PLP has also re-engineered the production line to allow for speedy change over times between galvanised high tensile steel, stainless steel, copper, aluminium and aluminium-clad wires in diameters ranging from 1.6mm to 9.27mm.
Utilising in-house drop hammers, upsetters and screw presses, PLP offers a full range of forging services. Materials such as high carbon steel, mild steel, stainless steel, copper and aluminium, can be forged as well as heat-treated when required. The in-house, Lloyds certified, tensile testing facility ensures that production capability is maintained and customer specifications are met.
The Engineering Department at PLP is the place where technology meets customer needs. Whilst continually striving to embrace new technologies and materials in order to address both current and future requirements, the engineering area must also design within the strict limitations of applicable standards. This challenge results in our Engineering Department covering a very broad spectrum of materials and engineering disciplines.
Plastic Injection MOULDING
CNC Manufacturing
PLP prides itself on its range of outdoor, high strength injection moulded products, which can withstand total UV exposure in the most hazardous of environmental conditions. The range of our moulding machine capacity extends from minimal to 365 MT.
The fully programmable CNC machining centre allows for the automatic production of many of the precision turned parts required for our market, eliminating the need for operator intervention. Speed of manufacture, combined with consistency of product, are two major benefits of employing such equipment .
www.racktechnologies.com.au
R T C O M P A N Y INTRODUCTION Rack technologies Rack Technologies is a proud Australian manufacturer of 600 and 800 wide rack system enclosures and accessories for the communications, electronic, data centre and security industries. We have manufacturing facilities in Australia and New Zealand. Rack Technologies prides itself in offering timely service to customers throughout the world. Our quality and service, in conjunction with our suppliers, guarantee our customers the best value in the industry. Rack Technologies is committed to generating profit for its shareholders and a dynamic and rewarding work environment for its dedicated employees.
Rack Technologies enclosures comply with International Standard IEC297 and are endorsedby SCEC.
In order to attain and maintain the above objectives, Rack Technologies relies on the implementation of a Certified Quality Management System, which meets the requirement of AS/NZS ISO 9001-2008. Product Specification Rack Technologies RT Series cabinets are constructed from corrosion resistant, extruded aluminium frames and die cast corners, for added strength and durability. The material used is architectural grade 6060-T5 alloy, produced to Australian Standard AS 1866. Sheet metal is formed for top, side panels and mounting rails. Door frames are constructed from 1.6mm steel, with a commercial grade tinted acrylic panel secured using industrial strength adhesives. The powder coating is Interpon Plus and meets the Australian Standard AS 3715 at 80 microns. Rack Technologies cabinets are approved to the Seismic Loading Standard to meet the Bellcore Generic Requirement GR63-CORE (Issue 1, October 1995). Testing was conducted by the University of Technology, Sydney (UTS). Rack Technologies enclosures comply with the International Standard IEC297. Modular Design Rack Technologies modular design provides optimum space efficiency, allowing components to be stored individually, separately or as a complete assembly. In today’s market, where larger racks are often required, modular design enables flat pack delivery for tight and difficult working environments. For more information, please call Rack Technologies.
6
Ph: +612.8805.0050
Consider the environmental savings when buying Australian made.
BICSI is a professional association supporting the Information Transport Systems (ITS) Industry.
R T SERIES Cabinet Specification Frame Material and Construction Rack Technologies free standing cabinet frames are constructed from extrusions made from corrosion resistant aluminium (6060-T5) produced to Australian Standard AS1866. The extrusion is pressed, fitted to solid cast aluminium corners (AE401) and finished in Ripple Black gloss powder coat, to Australian Standard AS3715. In addition, every joint is positively locked together with six counter sunk earthing screws. All screws are located on the non-visual faces of the cabinet and are concealed by top and side panels to ensure security. All Rack Technologies components are zinc phosphate treated prior to the application of the powder coating. Cabinets are available in 600mm wide and 800mm wide mounting (external width). Side and Top Panels Side panels are lockable, sit flush with the cabinet and feature quick release clips and lower ventilation slots. Top panels are made with fan Knock-outs for 2,4 and 6 fan configurations. Fans can also be retro fitted. Both components are made from 1.2mm steel and are powder coated. Doors Doors are made from 1.6mm steel and are powder coated. For internal viewing equipment, 4.5mm tinted acrylic is fitted with industrial adhesive. Four styles of doors are available: acrylic, steel, steel-perforated and bi-fold. All styles of doors are available in various locking configurations: single point, three-point lock and bi-lock key. All are easily removable without tools. Doors sit flush and secure within the cabinet frame, with concealed quick release hinges providing extra security, and can be hung left or right. Mounting Rails Mounting rails (L-Rail) are fully adjustable, to suit most applications. Rails are very user friendly and can be moved with a Phillips head screwdriver. RU mounting holes, condtructed from 1.6mm zinc annealed steel, are 9.5mm square and are designed for M6 cage nuts. Rack Technologies enclosures comply with International Standard IEC297.
Certificate of Approval This certificate confirms that the company below complies with the following standard:
Preformed Line Products Australia Pty Ltd
Company Name Company Other Name Client ID
100660
Certification Standard
AS/NZS ISO9001-2008: Quality Management Requirements
Scope of Certification
Design, manufacture and stockholding of hardware fittings and assemblies for overhead power transmission and distribution. Manufacture and stockholding of hardware fittings and assemblies for aerial and optical fibre cable. Manufacture and stockholding of communication and data equipment. Manufacture of plastic injection mouldings and extrusions for power transmission, distribution and general industries. Design and manufacture of metal cabinets and racking systems for electronic and similar equipment.
Type of Certification
Management System CERTIFICATE DATES:
Certification Review Date
10/02/2011
Certification Expiry Date
10/02/2014
Certificate Issue Date
19/02/2008 24/02/2011
Certificate Last Update Date
APPROVED COMPANY/SITE ADDRESS(S): 190 Power Street Glendenning 2761 NSW Australia The use of the Accreditation Mark indicates accreditation by the Joint Accreditation System of Australia and New Zealand in respect to those activities covered by JAS-ANZ accreditation. Refer to www.jas-anz.org/register for verification.
This certification remains valid until the above mentioned expiry date and subject to the organisation’s continued compliance with the certification standard, and Global-Mark’s Terms and Conditions. This Certificate of Approval remains the property of Global-Mark Pty Ltd, Company Number: ACN.108-087-654
Certification Manager Global-Mark Pty Ltd, Copyright 2005
AS/NZS ISO9001-2008: Quality Management Requirements.
Certificate of Approval This certificate confirms that the company below complies with the following standard:
Company Name
Preformed Line Products Australia Pty Ltd
Company Other Name Client ID
100660
Certification Standard
AS/NZS 4801-2001 : Occupational Health and Safety Management Systems
Scope of Certification
Design, manufacture and stockholding of hardware fittings and assemblies for overhead power transmission and distribution. Manufacture and stockholding of hardware fittings and assemblies for aerial and optical fibre cable. Manufacture and stockholding of communication and data equipment. Manufacture of plastic injection mouldings and extrusions for power transmission, distribution and general industries. Design and manufacture of metal cabinets and racking systems for electronic and similar equipment.
Type of Certification
Management System CERTIFICATE DATES:
ACCESSORIES Accessories are available in black, unless stated otherwise.
Certification Review Date
30/03/2011
Certification Expiry Date
30/03/2014
Certificate Issue Date
9/06/2011
Certificate Last Update Date
APPROVED COMPANY/SITE ADDRESS (ES): 190 Power Street Glendenning 2761 NSW Australia This certification remains valid until the above mentioned expiry date and subject to the organisation’s continued compliance with the certification standard, and Global-Mark’s Terms and Conditions. This Certificate of Approval remains the property of Global-Mark Pty Ltd, Company Number: ACN.108-087-654 The use of the Accreditation Mark indicates accreditation by the Joint Accreditation System of Australia and New Zealand in respect to those activities covered by JAS-ANZ accreditation. Refer to www.jas-anz.org/register for verification.
Certification Manager Global-Mark Pty Ltd, Copyright 2005
AS/NZS 4801-2001: Occupational Health and Safety Management Systems.
[email protected]
7
Class C&B Endorsed Cabinets Class C & B cabinets demonstrated the exceptional quality and workmanship offered by Rack Technologies. These cabinets provide high-level security for data and communications equipment used in a secure network environment. Rack Technologies Class C & B equipment Racks have been endorsed by the Security Construction and Equipment Committee (SCEC) for the protection of classified equipment applications. This product is included in the Security Equipment catalogue. FEATURES: • Door fans (2, 4 and 6 fan options) • Vented side panels • One piece welded frame • SCEC Bi-lock - front and rear doors keyed alike for C Class cabinets • SCEC B Class lock - front and rear for B Class cabinets
• Special vented top panel • Removable doors • All side panels internally fixed • Concealed cable entry facility • Concealed 3-point locking • A variety of options for doors
class C&B CATALOGUE
OPTIONS/ACCESSORIES: • Front and rear doors with vented or solid panel inserts • Cooling fan options available • Cable managers “fingered” • Air dam • Power rails available in 5 and 10 way horizontal and 5, 10 and 20 way vertical • Power rails available in 10,15, 20 and 32amp configurations
Class B cabinet with door micro switch
8
Class c cabinet with lock and swing handle
Ph: +612.8805.0050
Class b cabinet with lock and swing handle
Class C cabinet with iQ cable manager
Class C cabinet with SCEC BI LOCK
iQ Series Cabinet Range
iQ Open Frame Series
The iQ series 600mm and 800mm wide cabinet range is one of the most advanced server racks featured on the Australian market. A robust construction made from durable welded steel with powder coated finish gives the iQ series a variety of applications.
The iQ Open Frame Series has been designed specifically for high density patching applications associated with data centres. There are several cable management options available utilising the Rack Technologies T-finger design.
The extra width on the outside of the vertical mounting rails can also be utilised for cable management, like the iQ Series vertical cable management system. this is perfect for high density patching as it keeps all cable runs neat and manageable. The 600mm and 800mm wide server range is available in 38RU and 45RU configurations, including 800mm, 900mm, 1000mm and 1200mm depths. It will house most servers on today’s market without overcrowding and allows excellent airflow for maximum cooling of precious server hardware.
The vertical cable managers are available in widths of 150mm, 300mm and 400mm. The iQ Open Frame rack can be bayed as many times as required in conjunction with the vertical cable management system. The 2-way hinged door cover design allows for ease of cable management as well as a neat and tidy finish. The iQ series 2-post open frame has a 500kg UDL load rating (dependent on application), while 4-post open frames have a 1000kg UDL load rating.
iQ SERIES catalogue
Cable Management The T Finger Vertical Cable Management System is designed to handle high density cabling, whether for termination or patching applications. It fits neatly alongside the vertical 19" rails within a 600mm or 800mm wide cabinet to ensure neat cabling as well as adherence to bend radius requirements. The T-fingers are mounted on steel channels in 2RU increments and can be removed to allow the bending and entry of larger cable bundles via the top or bottom or left or right. The fingers are available in 2 (two) lengths: 93mm and 146mm.
complete cabinet bayed with data equipment
iq open frame with vertical cable manager
Complete cabinet with 1RU, 2RU and 4RU horizontal cable managers
Complete cabinet with vertical cable manager
Cable slack spool attached to vertical cable manager
[email protected]
9
Industrial Enclosures Rack Technologies’ Industrial Enclosure range is custom-built and designed for applications requiring an environment sealed from water, dust and wind is required. As such, the enclosures can be modified to suit different environments and or requirements. Rack Technologies works closely with all major equipment manufacturers and clients to design and manufacture high quality cabinets that suit the needs and application of the market. Rack Technologies prides itself on service, punctual delivery and quality, backed by a serious commitment to the Australian market. The company’s comprehensive range of Australian made frames, cabinets and accessories provides a complete solution to all data and cabling needs and ensures flexibility for all applications, as well as future expansions.
Field Cabinets Rack Technologies’ Field Cabinets are custom-built and designed for outdoor applications that require a high degree of resistance to corrosion caused by water, dust and wind. Cabinets can be modified to suit different environments and/or requirements. OPTIONS/ACCESSORIES: • Constructed from 2.0mm (5052) aluminium • Also available in zinc annealed steel and stainless steel, both powder coated • Enclosure mounted on a 100mm high plinth with internal bolt down positions • Paint: powder-coat T33 smoke blue (anti-graffiti) • Interpon (easy to clean) • Meets requirements of IP55
10
Ph: +612.8805.0050
INDUSTRIAL catalogue
Scada and Electrical Cubicles Our range of Scada and Electrical Cubicles is currently in demand with major utilities throughout Australia. All cubicles are based on our 48RU fully welded frame (as preferred by utilities) with a load capacity of 1000kg (UDL). For swing frame cabinets, (with front access), the load capacity is 100kg (UDL). Flush fitting doors and side panels are available in a variety of designs, including; solid steel, perforated steel, acrylic and vented acrylic. Features • Fully complies with International Standard IEC 297 • Robust fully welded construction • Flush fitting doors and side panels • Installer friendly fittings and adjustability • Extensive range of optional accessories
IP Cabinet The range of IP65 cabinets and accessories is manufactured in Australia from durable welded steel, with a powder coated finish for longevity, in either Ripple Black or custom colours, which are available on request. OPTIONS/ACCESSORIES: • Fully welded construction • Powder coated: sizes from 12RU to 46RU • Depths from 350mm to 900mm • Top access panel (wall enclosure) • Top and bottom access panel (freestanding) • Fully tested to IP65 AS 1939-1990 Category 1 • Gland plates standard to maintain IP65 integrity • Fully complies with International Standard IEC 297
INDUSTRIAL catalogue
[email protected]
11
IP
code
IP CODE The IP Code is a two number code used to rate the protection provided by electrical enclosures for persons and equipment. Refer AS 1939-1990. Degrees of protection provided by enclosures for electrical equipment (IP Code). First Numeral Indicates protection of persons against access to hazardous parts and protection of equipment against ingress of solid foreign objects. Second Numeral Indicates protection of equipment against harmful ingress of water.
First Numeral
second Numeral
X = Protection unspecified (untested).
X = Protection unspecified (untested).
0 = Non protected.
0 = Non protected.
1 = Protection of the back of the hand against accidental access to hazardous parts and protection of equipment against objects larger than 50mm. Refer to Note 1.
1 = Protection against drops of water falling vertically.
2 = Protection of fingers against access to hazardous parts and protection of equipment against objects larger than 12.5mm. Refer to Note 1. 3 = Protection of persons holding tools or wires (larger than 2.5mm diameter) and protection of equipment against objects larger than 2.5mm (eg. ball bearings). Refer to Note 1. 4 = Protection of persons holding small tools or wires (larger than 1mm diameter) and protection of equipment against objects larger than 1mm. (eg. ball bearings). Refer to Note 1. 5 = Protection against entry of dust in sufficient quantity to interfere with satisfactory operation of equipment. Refer to Note 2. 6 = Complete protection against entry of dust. Refer to Note 2.
2 = Protection against drops of water falling vertically when the object is tilted by up to 15° (in any direction) from its normal position. 3 = Protection against spraying of water at up to 60° from the vertical. 4 = Protection against spraying and splashing water from practicable directions. 5 = Protection against a low pressure jet of water from all practicable directions. 6 = Protection against heavy seas or a strong jet of water from all practicable directions. 7 = Protection against temporary immersion. 8 = Protection against continuous submersion (test subject to agreement, but no less server than second numeral 7).
Note: 1. Ingress of near spherical objects is generally prevented (see AS1939, Clause 5.2 Note). Partial ingress of far from-spherical objects could be possible. Note: 2. First numerals 5 and 6 also imply protection indicated by first numerals 4, 3, 2 and 1.
12
Ph: +612.8805.0050
Data Centre The Move Towards Eco-Friendly and Energy Efficient The ever-increasing demands on IT equipment, combined with skyrocketing energy costs, is highlighting that traditional methods of environmental controls employed in server rooms and data centres are outdated and uncoordinated. To increase energy efficiency, a more holistic, engineered approach needs to be applied, which will optimise your environment with the right cooling and power infrastructure. Finding the right solution will reduce your Capital (CAPEX) and Operational (OPEX) costs in the long run. We understand the needs of mission-critical environments, so whether you are looking at building a new data centre or want to re-claim the precious capacity of your existing infrastructure, the team at Rack Technologies can help you reach your goals. Combining our broad range of 19" enclosures, power management products, cooling solutions, structured cabling systems, equipment protection and 19" accessories, all supported by our onsite installation team and dedicated project management group, provides you with a one-stop solution. This will bring you peace of mind when it comes to meeting your DC project needs. Cooling Solutions • In-cabinet airflow management tools • High airflow cabinet door options • Selection of proven aisle containment systems • In-row and perimeter CRAC units • Intelligent in-cabinet cooling units • Air and water cooled chillers • Thermal analysis testing
Complete cabinet with 1RU, 2RU and 4RU horizontal cable managers
19" ENCLOSURES • Seismic rated RT II cabinet range • iQ Series premium cabinet range • iQNC network cabling cabinets • iQ open patching frames • SCEC endorsed C&B Class range • Colocation (split) cabinets • High density cabling rack
POWER MANAGEMENT • Intelligent PDUs with remote control and environmental monitoring • Highly efficient and reliable UPS systems ranging from rack mounted to facility-wide tier IV reliability STRUCTURED CABLING • High Density T-finger iQ cable management system with designs for all our enclosures • High density inter-cabinet cable zones • Cable slack spools and cable drawers • Fibre management trays • Vertical cable trays • Various styles and sizes of horizontal cable managers EQUIPMENT PROTECTION • High security colocation data cages • SCEC endorsed cabinet locks • Auditable RFID card swipe access control • Auditable key-centric access control
Aisle containment system
DATA CENTRE catalogue
LOCAL AND REMOTE power monitoring system
with 600mm wide cabinets
[email protected]
13
Intelligent Power
distribution products
PDU Power rails Empowering you with real-time energy information to make smarter energy choices. The industry push for efficiency has IT managers seeking accurate and effective means to manage their critical power resources remotely. Rack Technologies proudly offers a broad range of intelligent PDUs to cater for our customers’ various needs. By combining a selection of desired features, users can effectively manage both their power and server room environment with one software package. Contact our sales team to find the right solution for you. Monitored Switched POM kWh HD ATS
Monitor total current remotely Monitor total current and control each outlet remotely Monitor per outlet current and control each outlet remotely Added kWh information to monitored, switched and POM PDU Equipped with dual input to increase power capacity in 1U PDU Equipped with dual input for redundant power protection
Features: • Single phase or three phase • 10A to 125A rating • 240V and 400V • Various outlets – IEC C13/C19,GPO • Power precision: +/- 2% • Regulatory approvals: CE, FCC • Various input plugs: IEC C14/C20,GPO and IP56
Product range Features:
PDU CATALOGUE
14
Ph: +612.8805.0050
ups
protection
UPS Protection Because your power supply must be faultless Protect your irreplaceable data and valuable equipment with the most reliable and energy efficient uninterruptible power supply (UPS) products on the market today. Whether you are securing your digitised family photos on a single home PC or protecting millions of dollars’ worth of mission-critical data and equipment in your data centre, Rack Technologies has the proven solution to meet your needs. In these IT-driven times, loss of data can give rise to massive financial cost in a matter of minutes. It is because we understand what you have at stake, and what might would result from having anything less than the highest quality power supply, that we offer you fail-safe solutions, featuring the most advanced expertise and cutting-edge technologies.
BROAD SELECTION OF UPS PRODUCTS TO TARGET YOUR SPECIFIC NEEDS • Desktop or 19" rack mounted units for home or SOHO, ranging from 600VA to 10kVA • Industry and data centre solutions, from 10kVA up to 5.4MVA • IP52 rated freestanding units for harsh industrial environments,10KVA to 80kVA • Portable, containerised UPS systems for permanent or temporary use, 100kW to 2.4MW
Contact Rack Technologies for more information on selecting the right UPS solution to suit your project needs.
EXAMPLES OF options AVAILABLE based on model selected: • Green power technology • Independently verified • kW=kVA (PF=1) • 96% efficiency up to 35°C • Single and three-phase UPS • 240V and 400V • Extended back-up time • Maintenance bypass switches • Remote management • Ethernet connection (WEB SNMP/MODBUS/ TCP/Email) • Battery management software • Flywheel compatibility • Advanced server shutdown options available
[email protected]
15
R ac k fundamentals SELECTING A RACK All cables eventually lead to electronic equipment, and most equipment is located in a rack. An equipment rack is the skeletal framework in which key components are arranged and interconnected. Rack design involves the process of selecting options to meet the needs of a specific installation. Equipment is not just mounted in a rack haphazardly. Special considerations is given regarding how much heat a piece of equipment emits, the types of signals sent to and from the equipment, whether or not the equipment features an interface component for a typical user and more. Rack designs requires substantial pre-planning and attention to all system elements. When carefully planning the design of equipment racks, consider the following: • What are the major considerations regarding equipment rack layout? • Is the necessary electrical cabling to be installed in the rack? • Where are the pipes, conduit and trays running to the rack to be located? • Will the pipes, conduit and trays have sufficient room to carry the cables to the rack? • What joinery is necessary to finishing the rack? • How will cabling run within the rack? • How are system power requirements to be best communicated to the rest of the design team? • How will heat created by the equipment be handled? • How can heavier and longer equipment be loaded onto the bottom of the rack?
Intelligent In-Cabinet Cooling System (IICCS) installed in rack
RACK types Wall mount rack With the proper hardware, wall mount racks attach to any type of wall. They swing open, enabling the technicians to access equipment from the rear. Installers should understand the structural issues associated with the installation of this type of rack to determine the wall’s capacity to hold the weight of the populated rack. Standard Wall Rack (WR) frame
16
Ph: +612.8805.0050
height and width panel width Panel widths varies according to rack type. The interior width of the rack must be sufficient enough to accommodate different types of equipment. Standard rack equipment features a rack space width of 19" inches. rack height Rack height ranges from over 2.2m to less than 30cm. Racks are also classified by their vertical mounting space. The specification is given as the number of Rack Units (RUs) available for equipment mounting. A single rack unit is 1.75 inches (44.45mm). Equipment is also typically measured in RUs. Some equipment, like larger servers, can be 10RU or more. On each of the side mounting rails, there are typically two or three punched holes for each rack unit. Caged nuts are inserted into the holes for the mounting of equipment. rack accessories If you think of a rack as an organisation space, it is a lot like a cupboard. Just as you can have space dividers, shelves and drawers in a cupboard, similar accessories are available for racks. Blanky are metal panels mounted in empty spaces between pieces of equipment. Rack Technologies manufactures all types of accessories, including: • Drawers, suitable for storing microphones, remote controls, cables and documentation • Shelves, ideal for consumer equipment that is not rack mountable • Sliding shelves, which provide easier access • Lighting, helpful in a dimly lit presentation rack • Power rails with circuit breakers, are available in 5 and 10 ways horizontal and 5, 10 and 20 way vertical
Vertical power rails
Horizontal power rails
Illustration showing rack dimensions
Vertical power rail installed
[email protected]
17
R T s e i s m i c rated Seismic rated Rack Technologies has completed an extensive exercise to have our floor racks seismic tested. Our aim was to partake in a universal test to prove the strength and reliability of our racks beyond doubt. Upon embarking on a search for an available international standard regarding loading and strength, we found that the only standard close to and relevant to the test was the Seismic Load Standard to Bellcore’s Generic Requirement (GR-63-CORE Issue 1 October 1995). This standard was founded in the United States where earthquakes are common and all kinds of structures must have the capacity to withstand great destabilising forces. We have worked in conjunction with the University of Technology Sydney to achieve our aim and we have drawn an impressive conclusion. Rack Technologies cabinets are approved for earthquake risk Zone 4. Although earthquakes are not a major concern in Australia, this achievement does clearly demonstrate the strength and reliability of our cabinets. Important note: All racks are Seismic tested: however, they are not fitted with the Seismic Kit as standard. The Seismic Kit can be fitted to any rack and is available upon request.
R T Icon definition
Rack Technologies racks comply with International Standard IEC297 and is endorsed by the SCEC.
Illustration showing rack dimensions.
Available in flat pack, easily assembled and perfect when access to sites is limited.
cabinets and accessories Design Your cabinet RT Series II - 600 Wide Cabinet RT Series II - 800 Wide Cabinet High Density Cabling Cabinet Cable Cabinet (Offset) - 800 Wide Fibre Telco Cabinet Acoustic Cabinet Intelligent In-Cabinet Cooling System Freestanding Accessories Freestanding Gallery
www.racktechnologies.com.au
d e s i g n your cabinet Customer details: If you require assistance, please call our Sales Team on (02) 8805 0050.
Customer name: Phone:
Mobile:
Please add me to Rack Technologies’ mailing list to keep me informed about new products and services!
Email:
1
2
Choose frame:
Choose width: 600 wide 700 wide 800 wide Choose depth: 600 1000 800 1200 900 Choose height: 12RU 30RU 18RU 38RU 24RU 42RU 27RU 45RU Cabinet dimensions
DOOR, SIDE and Top PANELS and locks:
Choose front door: (pages 34 and 35) Acrylic Solid steel Perforated Perforated (Hi-flow) Bi-fold (steel,perforated or acrylic) Choose back door: (pages 34 and 35) Acrylic Solid steel Perforated Perforated (Hi-flow) Bi-fold (steel,perforated or acrylic) Do you need side panels? (page 37) Yes
Choose top panel: (page 38) width x
mm
depth
Choose door lock: (page 36) Standard lock (swing handle) Cam lock (non-swing handle) (Special lock options, including bi-lock are available on request.
20
Ph: +612.8805.0050
Choose power rails: (pages 42-45) 5-way vertical 10-way vertical 20-way vertical 5-way horizontal 10-way horizontal Choose amp: 10Amp 15Amp 20Amp 32Amp Choose outlet: SAA (3 pin GPO) Choose faceplate:
IEC (page ??)
Quantity
No
mm
3
POWER RAILS:
Choose plug: Moulded 3 pin IEC Captive Screw cap Special requirements
5
CABLE MANAGEMEnT:
Choose cable mangement: Horizontal (page 46) Vertical (page 46) T-fingers (page 47)
S e n d t h i s f orm to R ac k T E C H N O L O GIES
Fax: 02.8805.0050 or Email:
[email protected]
SPECIAL REQUIREMENTS Note down your custom specification and requirements and our sales team will assist in designing your cabinet. (Eg: delivery instructions).
4
freestanding ACCESSORIES:
Choose Accessories: (pages 34-55) Fixed shelves (page 49) Sliding shelves (page 48) Cantilever shelves (page 48) Castors wheels (page 55) Levelling feet (page 55) Plinths (page 51) Document holders (page 50) Internal light (page 54) Blank panels (page 38) RU label (page 54) Cable tray (page 47) Baying kit (page 53) Chimneys (page 81) Brush cable entry (page 39)
placement diagrams:
Cabinet front view
How to use the accessory placement diagrams: If applicable, use the diagrams to indicate precisely where you require accessories to be fitted to your cabinet.
Plan view through cabinet mm
(set back of mounting angle from front of cabinet)
X
mm
(set back of mounting angle from rear of cabinet)
Y
mm
(distance between front and rear mounting angle)
Z
Rear
Fans (roof mounted): (pages 40-41) 2-fan unit 4-fan unit 6-fan unit Whisper + thermostat
6
Cable tray
DELIVERY:
Choose delivery: Deliver assembled Flat pack delivery (price on application)
Ph: (02) 8805 0050 Fax: 902) 8805 0093
[email protected] Email:
[email protected]
www.racktechnologies.com.au
21
RT series
600 wide cabinet
STANDARD INCLUSIONS: • Cabinet frame • Front and rear mounting rails
Design your cabinet page 20
standard configurations Choose Height: 12RU, 18RU, 27RU, 38RU, 42RU or 45RU Choose Depth: 600mm, 800mm, 900mm, 1000mm or 1200mm Colour: Ripple black Rails: (Fully Adjustable) Front and rear mounting rails
optional extras Doors: See pages 34-35 Side Panels: See page 37 Top/bottom panels: See page 38 Fans: See pages 40-41 Power rails: See pages 42-45 RU label: See page 54 Shelves: See pages 48-49 Cable Management: Vertical cable management system is available. See page 46 Example of a vertical power rail installed
See page 18 for icon descriptions
22
Ph: +612.8805.0050
features: • True 600mm wide footprint • Flush finish panels • Concealed hinges and fasteners • Quick release hinges and latches • Durable powder-coated finish • Modular design • Vertical power rails can be mounted on uprights
• Superior weight to strength ratio • Excellent corrosion resistance • Doors can be left or right hand hinged • Adjustable mounting rails • Fans, castor wheels, levelling feet, cable managers, internal lights, chimney and can be retrofitted
12RU
38RU
Part number RT1203 RT1204 RT1210 RT1201 RT1208
18RU Part number RT1803 RT1804 RT1810 RT1801 RT1808
27RU Part number RT2703 RT2704 RT2710 RT2701 RT2708
600 WIDE CABINET FRAME Ext. Dim. (mm) (h) x (w) x (d) 656 x 600 x 600 656 x 600 x 800 656 x 600 x 900 656 x 600 x 1000 656 x 600 x 1200
Int. Dim. (mm) (h) x (w) x (d) 573 x 517 x 517 573 x 517 x 717 573 x 517 x 817 573 x 517 x 917 573 x 517 x 1117
Weight (kg) 15.5 16.5 17 17.5 19
Int. Dim. (mm) (h) x (w) x (d) 840 x 517 x 517 840 x 517 x 717 840 x 517 x 817 840 x 517 x 917 840 x 517 x 1117
Weight (kg) 18 19 19.5 20 21.5
Int. Dim. (mm) (h) x (w) x (d) 1240 x 517 x 517 1240 x 517 x 717 1240 x 517 x 817 1240 x 517 x 917 1240 x 517 x 1117
Part number RT4203 RT4204 RT4210 RT4201 RT4208
Weight (kg) 21.5 22.5 23 24 25
Part number RT4503 RT4504 RT4510 RT4501 RT4508
Int. Dim. (mm) (h) x (w) x (d) 1729 x 517 x 517 1729 x 517 x 717 1729 x 517 x 817 1729 x 517 x 917 1729 x 517 x 1117
Weight (kg) 27.5 29 30 31 33
600 WIDE CABINET FRAME Ext. Dim.(mm) (h) x (w) x (d) 1992 x 600 x 600 1992 x 600 x 800 1992 x 600 x 900 1992 x 600 x 1000 1992 x 600 x 1200
45RU
600 WIDE CABINET FRAME Ext. Dim. (mm) (h) x (w) x (d) 1325 x 600 x 600 1325 x 600 x 800 1325 x 600 x 900 1325 x 600 x 1000 1325 x 600 x 1200
Ext. Dim. (mm) (h) x (w) x (d) 1815 x 600 x 600 1815 x 600 x 800 1815 x 600 x 900 1815 x 600 x 1000 1815 x 600 x 1200
42RU
600 WIDE CABINET FRAME Ext. Dim. (mm) (h) x (w) x (d) 925 x 600 x 600 925 x 600 x 800 925 x 600 x 900 925 x 600 x 1000 925 x 600 x 1200
Part number RT3803 RT3804 RT3810 RT3801 RT3808
600 WIDE CABINET FRAME
Int. Dim. (mm) (h) x (w) x (d) 1907 x 517 x 517 1907 x 517 x 717 1907 x 517 x 817 1907 x 517 x 917 1907 x 517 x 1117
Weight (kg) 29.5 31 32 33 34.5
600 WIDE CABINET FRAME Ext. Dim. (mm) (h) x (w) x (d) 2125 x 600 x 600 2125 x 600 x 800 2125 x 600 x 900 2125 x 600 x 1000 2125 x 600 x 1200
Int. Dim. (mm) (h) x (w) x (d) 2040 x 517 x 517 2040 x 517 x 717 2040 x 517 x 817 2040 x 517 x 917 2040 x 517 x 1117
[email protected]
Weight (kg) 30 32 33 34 35.5
23
RT series
800 wide cabinet
STANDARD INCLUSIONS: • Cabinet frame • Front and rear mounting rails
Design your cabinet page 20
standard configurations Choose Height: 12RU, 18RU, 27RU, 38RU, 42RU or 45RU Choose Depth: 600mm, 800mm, 900mm, 1000mm or 1200mm Colour: Ripple black Rails:
(Fully Adjustable)
Front and rear mounting rails
optional extras Doors: See pages 34-35 Side Panels: See page 37 Top/bottom panels: See page 38 Fans: See pages 40-41 Power rails: See pages 42-45 RU label: See page 54 Shelves: See pages 48-49 Cable Management: Vertical cable management system is available. See page 46
See page 18 for icon descriptions
24
Ph: +612.8805.0050
features: • Maximises cable management capacity • True 800mm wide footprint • Flush finish • Concealed hinges and fasteners • Quick release hinges and latches • Durable powder coated finish • Modular design • Vertical power rails can be mounted onto uprights
12RU Part number RT1205 RT1206 RT1200 RT1207 RT1209
18RU Part number RT1805 RT1806 RT1800 RT1807 RT1809
27RU Part number RT2705 RT2706 RT2700 RT2707 RT2709
Int. Dim. (mm) (h) x (w) x (d) 573 x 717 x 717 573 x 717 x 717 573 x 717 x 817 573 x 717 x 917 573 x 717 x 1117
Weight (kg) 21.5 25 26.5 28.5 31.5
Int. Dim. (mm) (h) x (w) x (d) 840 x 717 x 717 840 x 717 x 717 840 x 717 x 817 840 x 717 x 917 840 x 717 x 1117
Weight (kg) 24 27.5 29 31 34
Int. Dim. (mm) (h) x (w) x (d) 1240 x 717 x 717 1240 x 717 x 717 1240 x 717 x 817 1240 x 717 x 917 1240 x 717 x 1117
**= Height of cabinet in RU.
Part number RT3805 RT3806 RT3800 RT3807 RT3809
Weight (kg) 27.5 31 33 34.5 37.5
Part number RT4205 RT4206 RT4200 RT4207 RT4209
Part number RT4505 RT4506 RT4500 RT4507 RT4509
800 WIDE CABINET FRAME Ext. Dim. (mm) (h) x (w) x (d) 1815 x 800 x 600 1815 x 800 x 800 1815 x 800 x 900 1815 x 800 x 1000 1815 x 800 x 1200
Int. Dim. (mm) (h) x (w) x (d) 1729 x 717 x 717 1729 x 717 x 717 1729 x 717 x 817 1729 x 717 x 917 1729 x 717 x 1117
Weight (kg) 34 38 40 52 46
800 WIDE CABINET FRAME Ext. Dim. (mm) (h) x (w) x (d) 1992 x 800 x 600 1992 x 800 x 800 1992 x 800 x 900 1992 x 800 x 1000 1992 x 800 x 1200
45RU
800 WIDE CABINET FRAME Ext. Dim. (mm) (h) x (w) x (d) 1325 x 800 x 600 1325 x 800 x 800 1325 x 800 x 900 1325 x 800 x 1000 1325 x 800 x 1200
• Vertical management part number: iQCM**60
42RU
800 WIDE CABINET FRAME Ext. Dim. (mm) (h) x (w) x (d) 925 x 800 x 600 925 x 800 x 800 925 x 800 x 900 925 x 800 x 1000 925 x 800 x 1200
• Adjustable mounting rails • Fans, castor wheels, levelling feet, cable managers, internal lights, chimney and can be retrofitted
38RU
800 WIDE CABINET FRAME Ext. Dim. (mm) (h) x (w) x (d) 656 x 800 x 600 656 x 800 x 800 656 x 800 x 900 656 x 800 x 1000 656 x 800 x 1200
• Mounting rails are set at 19" standard • Superior weight to strength ratio • Excellent corrosion resistance • Doors can be left or right hand hinged
Int. Dim. (mm) (h) x (w) x (d) 1907 x 717 x 717 1907 x 717 x 717 1907 x 717 x 817 1907 x 717 x 917 1907 x 717 x 1117
Weight (kg) 36.5 40 42 44 48
800 WIDE CABINET FRAME Ext. Dim. (mm) (h) x (w) x (d) 2125 x 800 x 600 2125 x 800 x 800 2125 x 800 x 900 2125 x 800 x 1000 2125 x 800 x 1200
Int. Dim. (mm) (h) x (w) x (d) 2040 x 717 x 717 2040 x 717 x 717 2040 x 717 x 817 2040 x 717 x 917 2040 x 717 x 1117
[email protected]
Weight (kg) 37 41 43 45 49
25
R T HIGH DE N SI T Y C A B L I N G cabinet STANDARD INCLUSIONS: • Cabinet frame • Top panel • Front and rear mounting rails
standard configurations width: 970mm Height: 45RU (other heights are available on request)
Choose Depth: 600mm, 800mm, 900mm, 1000mm or 1200mm Colour: Ripple black
optional extras High Density Door: See page 27 Side Panels: See page 37 Cable Management: Part number iQCM4580
Description (mm) 45RU x 190 x 170
fibre cable spool: Used for both copper and fibre (allowing minimum bend radius) where the slack of the cable length is to be spooled inside the vertical management channels. Part number iQOF9506 iQOF9507
Length 70mm 140mm
See page 18 for icon descriptions
26
Ph: +612.8805.0050
Rack Technologies has developed a new enclosure complete with the most up-to-date cable management system. The fully enclosed cabinet addresses the customer’s requirement to house high-density copper and fibre optic patching facilities, together with large, chassis-based active equipment. The High-Density cabinet is designed around the iQ cable management system, whereas in most other cabinet designs, the iQ cable management system is a secondary thought. The system controls cable bend radius with the vertical finger design, which also accommodates large volumes of patch cables that travel vertically within the enclosure. The High-Density cabinet has optimises the space available within the cabinet. It is also capable of housing large, chassis-based switch equipment, and managing the high volume of cabling generally required.
cable management features: • Perfectly suited to limited space application, this cabinet features the capacity for three mounting faces • The traditional 800mm or 900mm deep cabinet enables deeper active and patching type installations • Now includes room and 19" rack mounting provision on the side for patching • Active equipment may be installed in the standard manner • Large cable bays can be positioned to enable bulk cable management • Brush strip cable entry is available • These cabinets are made to order. Price is available upon application
45RU
HIGH DENSITY CABLING RACK
Part number RT4505-HDC RT4506-HDC RT4500-HDC RT4507-HDC RT4509-HDC
Ext. Dim. (mm) (h) x (w) x (d) 2125 x 970 x 600 2125 x 970 x 800 2125 x 970 x 900 2125 x 970 x 1000 2125 x 970 x 1200
Int. Dim. (mm) (h) x (w) x (d) 1729 x 887 x 717 1729 x 887 x 717 1729 x 887 x 817 1729 x 887 x 917 1729 x 887 x 1117
Cross section of iQCM4580
45RU
HIGH DENSITY DOOR (WITH SWING HANDLE AS STANDARD)
Part number RT4512-HDC RT4514-HDC-HF RT4522-HDC RT4514-HDC-HF
Description Acrylic bi-fold door High flow perforated bi-fold door Steel bi-fold door High flow perforated bi-fold door
[email protected]
27
R T cabl e cab i n e t ( o f f s e t ) 800 wide STANDARD INCLUSIONS: • Cabinet frame • Top panel • Front and rear mounting rails
standard configurations Choose Height: 38RU, 42RU or 45RU Choose Depth: 600mm, 800mm, 900mm, 1000mm or 1200mm Colour: Ripple black
optional extras Doors: See pages 34-35 Side Panels: See page 37 Privacy panels: See page 37 Cable Management: Part Number iQCM**80
Description (mm) RU x 190 x 170
Note: **= height of cabinet in RU.
See page 18 for icon descriptions
28
Ph: +612.8805.0050
Features: • Cable cabinet has a 19" configuration on a 800mm wide body • The 19" configuration can be positioned to the right or left • Top and bottom cable entry • All accessories fit the cable cabinet
38RU
800 WIDE caBLE cabinet (OFFSET)
Part number RT3805-OFS RT3806-OFS RT3800-OFS RT3807-OFS RT3809-OFS
42RU
Int. Dim. (mm) (h) x (w) x (d) 1729 x 717 x 717 1729 x 717 x 717 1729 x 717 x 817 1729 x 717 x 917 1729 x 717 x 1117
800 WIDE caBLE cabinet (OFFSET)
Part number RT4205-OFS RT4206-OFS RT4200-OFS RT4207-OFS RT4209-OFS
45RU
Ext. Dim. (mm) (h) x (w) x (d) 1815 x 800 x 600 1815 x 800 x 800 1815 x 800 x 900 1815 x 800 x 1000 1815 x 800 x 1200
Ext. Dim. (mm) (h) x (w) x (d) 1992 x 800 x 600 1992 x 800 x 800 1992 x 800 x 900 1992 x 800 x 1000 1992 x 800 x 1200
Int. Dim. (mm) (h) x (w) x (d) 1907 x 717 x 717 1907 x 717 x 717 1907 x 717 x 817 1907 x 717 x 917 1907 x 717 x 1117
800 WIDE caBLE cabinet (OFFSET)
Part number RT4505-OFS RT4506-OFS RT4500-OFS RT4507-OFS RT4509-OFS
Ext. Dim. (mm) (h) x (w) x (d) 2125 x 800 x 600 2125 x 800 x 800 2125 x 800 x 900 2125 x 800 x 1000 2125 x 800 x 1200
Int. Dim. (mm) (h) x (w) x (d) 2040 x 717 x 717 2040 x 717 x 717 2040 x 717 x 817 2040 x 717 x 917 2040 x 717 x 1117
[email protected]
29
R T FI B R E T E L C O cabinet STANDARD INCLUSIONS: • Cabinet frame • Front and rear mounting rails • Bi-fold door with swing handle • Removable side panel • Rear panel • Adjustable mounting angle • Adjustable cable management channel both sides • Cable management ring both sides • iQ 140mm fibre spool - 6/side • iQ single sided cable management system • Roof brushed cable entry • Earth bar
standard configurations Width: 900mm Height: 45RU
(other heights are available on request)
Depth: 400mm Colour: Ripple black Rails:(Fully Adjustable) Front and rear mounting rails
optional extras Cable Management: Horizontal cable managers available. See page 46 Part number S-TF4540-01 Note: Other combinations available on request.
Side view 1
30
Side view 2* *Optional: Cable management with covers
Ph: +612.8805.0050
See page 18 for icon descriptions
R T A C O U S T I C cabinet STANDARD INCLUSIONS: • Choose cabinet frame (w) x (h) x (d) • Front and rear steel doors • Side panels • Top panel • Bottom panel • Whisper-quiet fans: top and bottom • Acoustic foam • Levelling feet or castor wheels
Design your cabinet page 20
standard configurations Choose Height: 12, 18, 27, 38, 42, 45, Choose Depth: 600, 800, 900, 1000, 1200 Colour: Ripple black Rails:(Fully Adjustable) Front and rear mounting rails acoustic cabinet: Part number configuration Add -AC to part number
Foam kit
Example: RT4507-AC = 45RU, 800 wide 1000 deep, acoustic rack
features: • Assembled in factory • Ideal solution for office environments with noisy servers or equipment • Reduces the decibel rating dramatically, thereby avoiding OH&S issues • Attenuation foam reduces the sound of equipment • Whisper-quiet fans • Commonly used in banks, hospitals and office environments
See page 18 for icon descriptions
[email protected]
31
R T II C C S Intelligent in-cabinet cooling system IICCS standard configuration Developed specifically for the IT industry, the IICCS provides the ideal in-cabinet operating environment for mission-critical servers and IT equipment. The IICCS is designed to be mounted inside a sealed server cabinet fitted with an in-cabinet airflow management system, which prevents the mixing of hot and cold air streams. In operation, hot exhausted server air is drawn into the IICCS through variable speed fans, transferring heat to an inbuilt water coil that is constantly fed chilled water, piped from a remote water chiller. The cold conditioned air is then directed into the cold air plenum at the front of the cabinet, where it can be consumed by the servers. The process is then repeated. Contact Rack Technologies to determine the right solution for your project needs. ADVANTAGES
cooling unit
• Avoids need for dedicated server room / closet for noisy IT equipment • Minimal footprint (or space requirements) • No additional building construction headaches • One point of contact for complete solution • Fast installation • Cost effective in the long term
• 3.5kW capacity
• Enables the cooling of just a rack, rather than an entire room • Adjusts cooling capacity quickly, to match server loads • Built in monitoring and safety features • System alarm via ethernet, email, SNMP and Bacnet • System can be checked remotely at any time • Optional door opening sensors • Optional alarm /monitoring via SMS notification
• Whisper-quiet operation • Minimal RU space • Intelligent remote access and monitoring • Environmentally friendly
OH&S FEATURES
The IICCS can be incorporated with our Data Centre racks, standard communication racks, IP cabinets and security cabinets. Rack Technologies provides a full service, from supply to installation and commissioning 12 months standard warranty included.
Rack options Height: 38RU, 42RU or 45RU Depth: 900mm, 1000mm, 1200mm colour: Optional colours doors: Plain or windowed Door open monitoring locks: High security locks
• Quiet operation; sound proofed for office environments
sound proofing
• High pressure pipe work and fixings incorporated
remote power management
• Concealed water piping solutions, which meet OH&S
Cable management
• Cabinet is fixed to the floor • Hi-visual warning labels in place • IICCS contains no hazardous gas refrigerant
Other: Available in 10 and 12kw versions (for 800mm wide racks only)
See page 18 for icon descriptions
32
Ph: +612.8805.0050
IICCS
typical office installation
IICCS
controller
IICCS
secure pipe fixing
IICCS
OH&S warning label
System Redundancy Component
Possible failures
Actions a) Alarm notification sent via Ethernet, SNMP and BACNET
Controller failure
b) Cabinet fans activated to pass room air through cabinet until fault rectified c) Aqua cooler service unit available within 24hours (2 hours’ response time within Sydney CBD) a) Alarm notification sent via Ethernet, SNMP and BACNET
Rack mounted IICCS5
Fan failure
b) Cabinet fans activated to pass room air through cabinet until fault rectified c) Unit serviced within 24hours (2 hours’ response time within Sydney CBD) a) Inbuilt water tray contains any water loss b) Water pressure monitoring system notes pressure drop and cuts power to water pump
Water leak
c) Alarm notification sent via Ethernet, SNMP and BACNET d) Cabinet fans activated to pass room air through cabinet until fault rectified e) Aqua cooler service unit within 24hours (2 hours’ response time within Sydney CBD) a) Alarm notification sent via Ethernet, SNMP and BACNET
Compressor / chiller unit
b) Cabinet fans activated to pass room air through cabinet until fault rectified System failure
c) Local BMS manager uses remote compressor reset feature to attempt system re-start d) If successful, cabinet fans are deactivated and normal operation continues. Otherwise e) Aqua cooler service unit within 24hours (2 hours’ response time within Sydney CBD) a) Water pressure monitoring system notes pressure drop and cuts power to water pump
Water lines
Accidentically cut / damaged
b) Alarm notification sent via Ethernet, SNMP and BACNET c) Cabinet fans activated to pass room air through cabinet until fault rectified d) Aqua cooler service unit within 24hours (2 hours’ response time within Sydney CBD)
Lost to rack
Power supply
Lost to compressor / chiller
IICCS5 - dual power input - automatically powered by UPS until cabinet power restored a) Alarm notification sent via Ethernet, SNMP and BACNET b) Cabinet fans activated to pass room air through cabinet until fault rectified a) Alarm notification sent via Ethernet, SNMP and BACNET
Lost to entire site
b) Cabinet fans activated to pass room air through cabinet until fault rectified, or UPS batteries are exhausted
[email protected]
33
R T f r e e s tan d i n g accessories acrylic doors (600/800 cabinets) Features: • Flush finish • Concealed hinge • Doors must be unlocked for removal • Can be hinged from right to left Suitable for 600 wide cabinets Part Height Width RU number (mm) (inch) RT1211 12 569 513 RT1811 18 836 513 RT2711 27 1236 513 RT3811 38 1725 513 RT4211 42 1903 513 RT4511 45 2036 513
• Quick release hinge • Acrylic doors allow users to monitor equipment visually
Suitable for 800 wide cabinets Part Height Width RU number (mm) (inch) RT1212 12 569 713 RT1812 18 836 713 RT2712 27 1236 713 RT3812 38 1725 713 RT4212 42 1903 713 RT4512 45 2036 713
steel doors (600/800 cabinets) Features: • Flush finish • Concealed hinge • Doors must be unlocked for removal • Can be hinged from right to left Suitable for 600 wide cabinets Part Height Width RU number (mm) (inch) RT1221 12 569 513 RT1821 18 836 513 RT2721 27 1236 513 RT3821 38 1725 513 RT4221 42 1903 513 RT4521 45 2036 513
34
Ph: +612.8805.0050
• Quick release hinge for ease of installation • Steel door usually utilised to enclose the rear of a cabinet Suitable for 800 wide cabinets Part Height Width RU number (mm) (inch) RT2222 12 569 713 RT1822 18 836 713 RT2722 27 1236 713 RT3822 38 1725 713 RT4222 42 1903 713 RT4522 45 2036 713
Perforated doors (600/800 cabinets)
62% perforation standard
Features: • 62% open perforated area • Perforated doors can be used as a front or rear door, to allow air flow • Perforation options; 62% (standard) or 80+% (optional)
Suitable for 600 wide cabinets Height Part Width RU number (mm) (inch) RT1223 12 569 513 RT1823 18 836 513 RT2723 27 1236 513 RT3823 38 1725 513 RT4223 42 1903 513 RT4523 45 2036 513
Note: Add -HF to part number = 80% Hi-flow
80% perforation optional (Hi-flow)
Example: RT4214-HF = 42 RU, 800 wide Hi-flow perforated door
Suitable for 800 wide cabinets Part Height Width RU number (mm) (inch) RT1214 12 569 713 RT1814 18 836 713 RT2714 27 1236 713 RT3814 38 1725 713 RT4214 42 1903 713 RT4514 45 2036 713
Bifold Doors (600/800 cabinets) Features: • Standard 3-point locking doors Part Number Configuration RTXXYY - BIFOLD XX = RU height:
YY = width (mm) and type:
12 RU 18 RU 27 RU 38 RU 42 RU 45 RU
11 - 600 wide - acrylic 21 - 600 wide - steel 23 - 600 wide - perforated 12 - 800 wide - acrylic 22 - 800 wide - steel 14 - 800 wide - perforated
Example: RT4523-BIFOLD = 45 RU, 600mm wide, perforated Bi-fold door
[email protected]
35
R T f r e e s tan d i n g accessories Lock Options Features: • Standard doors are complete with swing handles and lock • All other locks are available on request, including Bi-lock OPTION: • Cam lock (non-swing handle) • Add -IC to part number for infill panel with cam lock Part number configuration Standard lock
Infill cam lock
Combination lock
Bi-lock
Add -IC to door part number Example 1: RT4511-IC = 45RU, 600mm wide, acrylic door, infill panel with cam lock Example 2: RT4523-HF-3PT-IC = 45RU, 600mm wide, hi-flow (85%), 3-point lock cam lock
3-point locking (600/800 cabinets) Features: • Additional security • Can be retrofitted to any doors Part number configuration Add -3PT to door part number Example: RT4511-3PT = 45RU, 600mm wide, acrylic door, 3-point lock
36
Ph: +612.8805.0050
side panels Features: • Easily to remove or install; no tools required to facilitate installation • Quick release clips • Lockable
RU 12RU 18RU 27RU 38RU 42RU 45RU
600 (mm) RT1233 RT1833 RT2733 RT3833 RT4233 RT4533
• Lower ventilation slots to improve ventilation • Dust filters for the ventilation slots are available upon request
Cabinet depth 800 900 (mm) (mm) RT1234 RT1236 RT1834 RT1836 RT2734 RT2736 RT3834 RT3836 RT4234 RT4236 RT4534 RT4536
1000 (mm) RT1238 RT1838 RT2738 RT3838 RT4238 RT4538
1200 (mm) RT1239 RT1839 RT2739 RT3839 RT4239 RT4539
Privacy panels Features: • Easily to remove or install; no tools required to facilitate installation • Quick release clips • Knock-outs for cable entry between cabinets • Lockable
RU 12RU 18RU 27RU 38RU 42RU 45RU
600 (mm) RT1233-P RT1833-P RT2733-P RT3833-P RT4233-P RT4533-P
Cabinet depth 800 900 (mm) (mm) RT1234-P RT1236-P RT1834-P RT1836-P RT2734-P RT2736-P RT3834-P RT3836-P RT4234-P RT4236-P RT4534-P RT4536-P
1000 (mm) RT1238-P RT1838-P RT2738-P RT3838-P RT4238-P RT4538-P
1200 (mm) RT1239-P RT1839-P RT2739-P RT3839-P RT4239-P RT4539-P
[email protected]
37
R T f r e e s tan d i n g accessories Mounting rails
Features: • Supplied in pairs • Fully adjustable • Suitable for all applications • Easily installed • All fasteners provided
Part number RT1241 RT1841 RT2741 RT3841 RT4241 RT4541
RU 12RU 18RU 27RU 38RU 42RU 45RU
Note: These mounting rails are designed for use in freestanding RT 600mm wide racks only. They are not for use in the wall mounted cabinet series.
top panel for 19" Cabinets
Features: • Allow cable entry from the top panel • Fans can be retrofitted • Filters can be added to the fans • Top can be removed easily without tools • Cutout suits standard cable chimney and brush cable entry
Top Panel (only) 600 wide 800 wide
blank panels tool-less
38
600 (mm) RT4583 RT4585
Cabinet depth 800 900 (mm) (mm) RT4584 RT4589 RT4586 RT4590
Features: • Can be used with all 19" shape equipment rails • All fasteners provided • Quick release • No tool required for mounting or dismounting
Ph: +612.8805.0050
Note: Only 2 or 4 fan configurations are available for 600 and 800 wide deep top panels.
1000 (mm) RT4591 RT4592
1200 (mm) RT4596 RT4595
Suitable for 600 wide cabinets Dim. (mm) Part number RU x (w) 9041-T 1RU x 483 9042-T 2RU x 483 9043-T 3RU x 483 9044-T 4RU x 483 9202-T 6RU x 483
roof brushed cable entry
Features: • Protects cable bundles on cabinet entry • Reduces dust infiltration into the cabinet • Easy to mount • Nylon brush
raised floor cable entry
Features: • Comes in 2 pieces • Retrofitted to existing cable installation bundle • Nylon brush
horizontal brush cable entry
Features: • Can be used with all 19” shape equipment rails • Allows cable to penetrate the cabinet while preventing dust ingress • Helps prevent recirculation of hot air in cabinet • Enables better management of cold air circulation in cabinet • Aids front to rear cable entry • All fasteners provided
Part number 9286
Part number 9287
Part number 9284 9285
[email protected]
Slot Dim. (mm) (w) x (d) 219 x 78
Slot Dim. (mm) (w) x (d) 200 x 48 (1 half) 200 x 96 (2 halves)
Slot Dim. (mm) RU x (w) x (slot) 1RU x 390 x 25 2RU x 390 x 60
39
R T f r e e s tan d i n g accessories filter kit for side panels
Features: • A full range of filters are available to suit your needs • Filters can be added during either production or can be retrofitted • Prevent dust ingress into cabinet by filtering and blocked micro particles • Filter kit consists of: filter guide, double-sided tape and dust filter
fan filter
Features: • Not suitable for 2-fan cantilever shelves • Prevent dust ingress into cabinet by filtering and blocked micro particles
ru MOUNTABLE 2-fan
Features: • Rectifies hot spots in cabinets • Whisper-quiet fans are available on request, for sensitive office environments • Thermostat option available • Supplied as complete; with 2.5 metre lead and 3-pin plug • Dimensions: 1RU x 170mm deep • Fits all standard 19" equipment rails
(cantilever shelf) 19"
170mm 47mm
40
Ph: +612.8805.0050
9006 9007 9103 9105
Depth (mm) 600 800 900 1000
Part number 9076 9077
Description 2-fan unit 4-fan unit
Part number
Part number 9020 9020-W 9020-TH 9020-W-TH
Description 2-fan unit 2-fan unit - Whisper 2-fan unit - Thermostatic Thermostat / Whisper
WHISPER FAN
fan kits
Features: • Improves air flow • Totally flush on top panel • Low noise level fans • Safety protected finger guards fully installed top and bottom • Supplied as complete; with 2.5 metre lead and 3-pin plug • Whisper-quiet fans are available on request, for sensitive office environments
(2-fan unit kit)
319mm
122mm 42mm
• Thermostat available
fan kits
Features: • Improves air flow • Totally flush on frame • Low noise level fans • Safety protected finger guards fully installed top and bottom • Supplied as complete; with 2.5 metre lead and 3-pin plug • Whisper-quiet fans are available on request, for sensitive office environments • Thermostat also available
(4-fan unit kit) 325mm
279mm
42mm
fan kits
(6-fan unit kit) 319mm
42mm
443mm
Features: • Totally flush on frame • Low noise level fans • Improves airflow • Safety protected finger guards fully installed top and bottom • Supplied as complete; with 2.5 metre lead and 3-pin plug • For 1000mm and 1200mm deep cabinets • Thermostat also available
Part number RT9182 RT9182-TH RT9182-W RT9182-W-TH
Description Thermostat Whisper Thermostat / whisper
WHISPER FAN
Note: Blocking plate supplied part number: 01-2550
Part number RT9183 RT9183-TH RT9183-W RT9183-W-TH
Description Thermostat Whisper Thermostat / whisper
WHISPER FAN Note: add -R for reverse flow for bottom panels.
Part number RT9186 RT9186-TH RT9186-W RT9186-W-TH
[email protected]
Description Thermostat Whisper Thermostat / whisper
WHISPER FAN
41
R T f r e e s tan d i n g accessories power rail options Rack Technologies stocks a wide range of power rails with hundreds of combinations available. Contact our sales team for more information on (02) 8805 0050 or email us at
[email protected].
10A 3-pins
10A 3-pins
15A 3-pins
20A 3-pins
10A 3-pins
16A 3-pins
Standard 10A mains C14
Standard 16A mains C20
(flat earth)
(round earth)
(flat earth)
(flat earth)
Standard 10A mains
10A mains with round earth pin
Standard 15A mains
Standard 20A mains
horizontal power rails
(IEC)
(IEC)
Features: • Suits any 600mm wide racks • 5-way has 1RU minimum height • 10-way has 2RU minimum height • Recessing bracket available upon request
Part number 9503 9503-CAPT 9503-15AMP 9503-20AMP 9503-IEC 9503-IEC/15AMP
Current reader module Factory fitted option available
42
Ph: +612.8805.0050
Description 10-way horizontal SAA 10A GPO, 10A CB, SAA 10A plug 10-way horizontal SAA 10A GPO, 10A CB, 10A Captive plug F 10-way horizontal SAA 15A GPO, 16A CB, 15A Captive plug F 10-way horizontal SAA 20A GPO, 20A CB, 15A Captive plug F 10-way horizontal SAA 10A GPO, 10A CB, IEC C14/10A plug 10-way horizontal SAA 15A GPO, 16A CB, IEC C20/15A plug
vertical power rails
Current reader module Factory fitted option available
Features: • Complete with 10, 15 or 20 amp circuit breaker • 2.5 metre flex lead and plug • 32 amp also available • IEC and captive plugs available upon request • 240 volts • Easily installed • Fasteners provided • Mounting bracket available upon request • Many power rail combinations available upon request Part number 9502
Description 5-way vertical SAA 10A GPO, 10A CB, SAA 10A Plug
9502-CAPT 9502-15AMP 9502-20AMP 9502-IEC 9502-15A-IEC 9504 9504-CAPT 9504-15AMP 9504-20AMP 9504-IEC 9504-IEC/15A 9505 9505-CAPT 9505-15AMP 9505-20AMP 9505-IEC 9505-IEC/15A
5-way vertical SAA 10A GPO, 10A CB, 10A Captive plug F 5-way vertical SAA 15A GPO, 16A CB, 15A Captive plug F 5-way vertical SAA 20A GPO, 10A CB, 10A Captive plug F 5-way vertical SAA 10A GPO, 10A CB, IEC C14/10A plug 5-way vertical SAA 15A GPO, 16A CB, IEC C20/15A plug 10-way vertical SAA 10A GPO, 10A CB, SAA 10A plug 10-way vertical SAA 10A GPO, 10A CB, 10A Captive plug F 10-way vertical SAA 15A GPO, 16A CB, 15A Captive plug F 10-way vertical SAA 20A GPO, 10A CB, 10A Captive plug F 10-way vertical SAA 10A GPO, 10A CB, IEC C14/10A plug 10-way vertical SAA 15A GPO, 16A CB, IEC C20/15A plug 20-way vertical SAA 10A GPO, 10A CB, SAA 10A plug 20-way vertical SAA 10A GPO, 10A CB, 10A Captive plug F 20-way vertical SAA 15A GPO, 16A CB, 15A Captive plug F 20-way vertical SAA 20A GPO, 10A CB, 10A Captive plug F 2-way vertical SAA 10A GPO, 10A CB, IEC C14/10A plug 20-way vertical SAA 15A GPO, 16A CB, IEC C20/15A plug
Vertical power rail installed
[email protected]
43
R T f r e e s tan d i n g accessories INTELLIGENT power rails
Rack Technologies proudly offers a broad range of intelligent PDUs to cater for the various needs of our customers. See page 14 for details. Features: • Single phase and three phase available • 10A to 125A rating • 240V and 400V • Various outlets: IEC C13/C19, GPO • Power precision: +/- 2% • Regulatory approvals: CE, FCC • Various input plugs: IEC C14/C20,GPO, IP56
44
Ph: +612.8805.0050
iec socket power rails
Features: • Complete with 10, 15 or 20 amp circuit breaker • IEC C13 amp and C19 amp standard outlet • 2.5 metre flex lead and plug • 32 amp also available • IEC and captive plugs also available upon request • Fixing points to suit shelf rail vertical mounting channels • 240 volts • Easily installed • Fasteners provided • Mounting bracket included
Part number
Current reader module Factory fitted option available
Vertical power rails Description
9508
12-way vertical IEC C13/10A outlets, NCB, SAA 10A plug
9508-CAPT
12-way vertical IEC C13/10A outlets, NCB, SAA 10A Captive plug F
9508-15AMP
12-way vertical IEC C13/10A outlets, NCB, SAA 15A Captive plug F
9508-20AMP
12-way vertical IEC C13/10A outlets, NCB, SAA 20A Captive plug F
9508-IEC
12-way vertical IEC C13/10A outlets, NCB, IEC C14/10A plug
9508-15AMP-IEC
12-way vertical IEC C13/10A outlets, NCB, IEC C20/15A plug
9519-20A-BL
18-way vertical IEC 16xC13/10A + 2xC19/15A flex 20a plug
9519-20A-RD
18-way vertical IEC 16xC13/10A + 2xC19/15A flex 20A plug
9519-CBA-32A-BL
18-way vertical IEC 16xC13/10A + 2xC19/15A flex 32A Captive plug R
9519-CBA-32A-BL
18-way vertical IEC 16xC13/10A + 2xC19/15A flex 32A Captive plug R
9509
20-way vertical IEC C13/10A outlets, NCB, SAA 10A plug
9509-CAPT
20-way vertical IEC C13/10A outlets, NCB, SAA 10A Captive plug F
9509-15AMP
20-way vertical IEC C13/10A outlets, NCB, SAA 15A Captive plug F
9509-20AMP
20-way vertical IEC C13/10A outlets, NCB, SAA 20A Captive plug F
9509-IEC
20-way vertical IEC C13/10A outlets, NCB, IEC C14/10A plug
9509-15AMP-IEC
20-way vertical IEC C13/10A outlets, NCB, IEC C20/15A plug
Part number
Horizontal power rails Description
9512
12-way horizontal IEC C13/10A outlets, NCB, SAA 10A plug
9512-CAPT
12-way horizontal IEC C13/10A outlets, NCB, SAA 10A Captive plug F
9512-15AMP
12-way horizontal IEC C13/10A outlets, NCB, SAA 15A Captive plug F
9512-20AMP
12-way horizontal IEC C13/10A outlets, NCB, SAA 20A Captive plug F
9512-IEC
12-way horizontal IEC C13/10A outlets, NCB, IEC C14/10A plug
9512-15AMP-IEC
12-way horizontal IEC C13/10A outlets, NCB, IEC C20/15A plug
[email protected]
45
R T f r e e s tan d i n g accessories t-finger cable management Vertical
Features: • Designed to handle high density cabling, for termination or patching applications • Fits neatly alongside vertical rails within 600mm wide cabinets • All fasteners provided Note: 93mm T-finger standard; for 145mm, add -150 to part number. For more cable management use the 146 T-finger, add -150 to part number.
Suitable for 600 wide cabinets Dim. (mm) Part number RU (w) x (d) iQCM1870-RT 18RU 40 x 155 iQCM2770-RT 27RU 40 x 155 iQCM3870-RT 38RU 40 x 155 iQCM4270-RT 42RU 40 x 155 iQCM4570-RT 45RU 40 x 155 iQCM1870-150-RT 18RU 40 x 205 iQCM2470-150-RT 24RU 40 x 205 iQCM3070-150-RT 30RU 40 x 205 iQCM3870-150-RT 38RU 40 x 205 iQCM4570-150-RT 45RU 40 x 205
t-finger cable management Horizontal
46
Features: • Supports and ensures bending radii are met • Routing of cable to maximise capacity
Ph: +612.8805.0050
Suitable for 800 wide cabinets Dim. (mm) Part number RU (w) x (d) iQCM1860 18RU 80 x 155 iQCM2760 27RU 80 x 155 iQCM3860 38RU 80 x 155 iQCM420 42RU 80 x 155 iQCM4560 45RU 80 x 155 iQCM1860-150 18RU 80 x 205 iQCM2460-150 24RU 80 x 205 iQCM3060-150 30RU 80 x 205 iQCM3860-150 38RU 80 x 205 iQCM4560-150 45RU 80 x 205
Suitable for 600 wide cabinets Part number RU Dim. (mm) iQOF9509 1RU 130 usable depth iQOF9502 2RU 130 usable depth iQOF9512 4RU 130 usable depth iQOF9509-150 1RU 183 usable depth iQOF9502-150 2RU 183 usable depth iQOF9512-150 4RU 183 usable depth
t-finger cable management
Features: • Suitable for 600mm and 800mm wide cabinets only
Part number iQCM08100 iQCM08100-150
Description 93mm T-finger 8RU single module 146mm T-finger 8RU single module
Note: (iQCM45100) add -150 for longer fingers; for single side, 45RU.
Single modular
cable trays
adjustable shelf rails
T-fingers
Features: • Easily installed • All fasteners included • Double folded edge for cable safety • Available in 12RU, 18RU, 27RU, 38RU, 42RU and 45RU
Features: • This product is user-friendly, easy to install, strong, lightweight and adjustable from 500mm to 880mm. Unlike shelves, these rails take up no RU space nor do they affect air flow • The equipment support brackets mount easily to rails, providing a strong base for all types of 19", 21" and 26" equipment • Fits upto 1000mm deep cabinets • Supplied in pairs
Part number RT**51 RT**52 RT**53 RT**54
Width (mm) 150 225 300 400
Note: ** = height of cabinet in RU.
Part number S-KIT-SRL-01-500925
[email protected]
Dim. (mm) adjustable depth 500 to 880
47
R T f r e e s tan d i n g accessories cantilever shelves
Features: • Easily installed • All fasteners included • Suitable for all cabinets
• Suitable for wall mount frames • Suitable for all open and iQ frames • Vented for better cooling Part number 9121 9022 9023
sliding drawer
Sliding shelves
Features: • Slide to 3/4 full length • Load capacity of 50kg • Ball bearing slide for greater control of heavy loads • Fasteners included • Fully enclosed • Central pull-out handle
Features: • Slide to full length • Load capacity of 50kg • Ball bearing slide for greater control of heavy loads
Part number 9028 9029 9082 9087
48
Ph: +612.8805.0050
Dim. (mm) (w) x (d) 420 x 400 420 x 600 420 x 700 420 x 800
Dim. (mm) RU x (w) x (d) 1RU x 483 x 170 2RU x 483 x 275 3RU x 483 x 390
Part number 9121 9121-600 9121-700
Load capacity 20kg 25kg 30kg
Suitable for cabinets 400mm runner (suits min. 600 deep cabinet) 600mm runner (suits min. 800 deep cabinet) 700mm runner (suits min. 900 deep cabinet)
• Fasteners included • Fully vented • Easily installed
Description For use in cabinets 19" x min. 600mm deep For use in cabinets 19" x min. 600mm deep For use in cabinets 19" x min. 900mm deep For use in cabinets 19" x min. 1000mm deep
fixed shelves
Features: • Heavy duty load bearing capacity of 100kg (UDL) • Fully vented • Fixing screws concealed from view Part number 9024 9025 9026 9080 9086 9088 9080-ST
fixed shelves mounting bracket (set of 4)
Dim. (mm) (w) x (d) 449 x 400 449 x 450 449 x 600 449 x 700 449 x 800 449 x 900 449 x 700
• Easily installed • Fixed shelves are supplied with mounting brackets; part no: 9229 (AUS) 9166 (NZ) Description For use in cabinets 19" x min. 600mm deep For use in cabinets 19" x min. 600mm deep For use in cabinets 19" x min. 800mm deep For use in cabinets 19" x min. 900mm deep For use in cabinets 19" x min. 1000mm deep For use in cabinets 19" x min. 1000mm deep For use in cabinets 19" x min. 1200mm deep
Features: • Set of 4 mounting brackets consist of: 4x M6 brackets, 4x M6 cage nuts, 4x M6 screws and 4x M6 flat washers
Part number (AUS) 9229
Part number (NZ) 9166
APPLICATION: • For use when standard shelf installation is difficult, usually when side access is restricted
recessing bracket (1ru/50mm)
Features: • Allows the recessing of equipment 50mm deeper into the cabinet. Note: *100mm on part number: 9237-100 • A pair of recessing brackets are supplied with cage nuts; part no: 9074. See page 54.
Part number 9237 9237-100 9228
Description 1RU recessing brackets for horizontal power panel (pair) *1RU 100mm recessing brackets (pair) 2RU recessing brackets for horizontal power panel (pair)
Note: When using brackets in either 38RU or 45RU racks, the power panel must be mounted between the centre supports.
[email protected]
49
R T f r e e s tan d i n g accessories fold down keyboard and mouse tray Keyboard and mouse not included
pivoting keyboard shelf Keyboard and mouse not included
document holder
50
Features: • Keyboard must be in upright position before mouse tray can be withdrawn for use • Pocket built into mouse tray for easy storage • Velcro strip provided, to secure the keyboard to the folding shelf • Fasteners included • Cable carrier for rear cable management
Part number 9160
Suitable for cabinets 19" x min. 600mm deep
Features: • Allows for a standard width keyboard to be used in a 19" cabinet. • Shelf must be withdrawn before keyboard tray can be pivoted for use
Part number 9161-400 9161 9161-700
Suitable for cabinets 600mm deep cabinet 800mm deep cabinet 900mm deep cabinet
Features: • Usually installed on the rear steel doors • Clear or metal document holder • Available in two sizes: A4 or A3 • Affixed with industrial strength adhesives
Ph: +612.8805.0050
Part number SCHEDULE 9095
Description
Dim. (mm) (h) x (w) x (d)
A4 clear 250 x 250 x 32 schedule holder A4 metal 250 x 250 x 32 document holder
cabinet plinths
Features: • Raises cabinet 50mm off floor • Provides cable entry at rear of cabinet • Load capacity of 250kg max (UDL)
Description 600 wide part number 800 wide part number
600 (mm) RT9051 RT9150
Cabinet depth 800 900 (mm) (mm) RT9052 RT9151 RT9069 RT9152
1000 (mm) RT9153 RT9156
1200 (mm) RT9174 RT9175
Note: Not suitable for use with bottom panel.
cabinet plinths Gland
RACKMOUNT SECURITY fascia
Features: • Provided to cover cable entry holes on plinth
Features: • Rack mountable • Cam lock key • Acrylic window • Unit size: 3RU, 71mm deep
Part number 9232
Suitable for 19" cabinets Part number 9280
[email protected]
51
R T f r e e s tan d i n g accessories rear wall/FLOOR mount kit
Features: • One size suits all • Top and bottom supplied as one unit • Maximum weight is determined by wall strength and fasteners • Easily installed • Rear wall/floor mount kit is supplied with fasteners, excludes wall/floor bolts
Part number 9073
side wall mount kit
Features: • Maximum weight is determined by wall strength and fasteners • Allows access to front and rear doors and one side • Side wall mount kit is supplied with fasteners, excludes wall bolts
Part number 9401
anti-tilt bracket
52
Features: • To be used with levelling feet • Anti-tilt brackets are supplied with fasteners, excludes floor bolts
Ph: +612.8805.0050
Part number 9038
Description Levelling foot anti-tilt clamp
earthing kit
Features: • 400mm long earthing cable • Earthing kit consists of: M6 rings at each end, 2x M6 studs, 4x M6 nuts, 4x M6 star washers
Part number 9402
earthing bar
Features: • Copper earth bar is 3mm thick with, slotted and threaded holes
Part number C**55
baying kit
Features: • Cabinets can be bayed externally • Easily installed • Baying kit consist of: baying bracket and fasteners
Note: ** = height of cabinet in RU.
Part number 9400
Description Cabinet corners baying bracket kit (pair)
[email protected]
53
R T f r e e s tan d i n g accessories ru labels
Features: • Adhesive backing • Can be easily trimmed to required height • Locate RU position in cabinet • Two colour code, easily identifies RU position • Bottom to top number sequence
MICRO SWITCH DOOR ACITIVATED LIGHT
Features: • Fits all standard 19" equipment • Door activated • Can be retrofitted
Part number
cage nuts
Features: • Set of 4 cage nuts consist of: 4x M6 cage nuts, 4x M6 screws and 4x M6 flat washers
Part number 9074 9075
(set of 4)
• All of Rack Technologies accessories are supplied with the appropriate number of cage nuts for installation
54
Ph: +612.8805.0050
Part number 9250
9017
RU 45RU
Description Rack mounted light; door operated
Description Fastener kit (set of 4) Fastener kit (set of 100)
levelling feet (set of 4)
cabinet castors (set of 4)
Features: • Maximum load capacity of 500kg (UDL) • Feet attach directly to frame for extra stability and support • Levelling feet are fully adjustable • Feet can raise cabinet enclosure 60mm off the ground • Optional bottom plate with cable entry cut-out available upon request • Solves uneven floor issues
Part number
Features:
Part number
• Castors attach directly to cabinet frame for extra stability and support. • Front castors have brakes • Castors can raise the cabinet enclosure 100mm off the ground • Maximum load capacity of 250kg (UDL) • Bottom plate with cable entry cut-out available upon request
9039-M
9040-M
Description Suits all free standing cabinets; set of 4 (plinth not included)
Description Suits all free standing cabinets; set of 4 (plinth not included)
Note: Retrofitted bases for existing cabinets available on request.
[email protected]
55
R T F R EES T A N DI N G GALLERY
RT series 600 wide
RT series 800 wide
slit cabinet
RT series 800 wide
Class c Cabinet
iq series 800 wide
acrylic door
perforated door
Custom cabinets made to order
acrylic door
4-fan door
High density cable rack bi-fold doors
2 split with bi-fold doors
cable zone with cable duct
telco fibre rack bi-fold doors
s pl i t ( colo ) cabinets Split Cabinet - 600 Wide Split Cabinet - 800 Wide Split Cabinet Gallery
www.racktechnologies.com.au
R T s pl i t cab i n e t 600 and 800 wide STANDARD INCLUSIONS: • Cabinet frame • Top panel • Front and rear mounting rails • 2x side panels (no split) • Split doors (see options) • Standard swing handle with lock
Design your cabinet page 20
standard configurations width: 600mm or 800mm choose Depth: 600mm, 800mm, 900mm, 1000mm or 1200mm Colour: Ripple black Rails:(Fully Adjustable) Front and rear mounting rails top panel: See page 38 Side Panels: See page 37 (no split)
doors: See pages 34-35 locks: Standard swing handle with lock; customised lock options available on request. See page 36
optional extras cable management: Part number iQCM2250
Secure cable duct: Duct system allows the user to access cable points in each section without crossover or interference.
58
Ph: +612.8805.0050
Features: • Available in 2 or multiple split lockable compartments • Various locking combinations with specific keyed sections • Acrylic, steel and perforated doors available • Every split utilises 1RU and should be taken into consideration when calculating to the total RU required
45RU
2-WAY SPLIT CABINET
Part number RT45XX-22-2
45RU
Configuration 22RU + 22RU
Cabinet height 45RU = 2125mm
3-WAY SPLIT CABINET
Part number RT45XX-14-3
Configuration 14RU + 14RU + 14RU
Cabinet height 45RU = 2125mm
XX = width (mm) x depth (mm): 03 - 600 x 600 04 - 600 x 800 10 - 600 x 900 01 - 600 x 1000 08 - 600 x 1200
05 - 800 x 600 06 - 800 x 800 00 - 800 x 900 07 - 800 x 1000 09 - 800 x 1200
DOOR CONFIGURATIONS 2-way split part number
3-way split part number
RTS22YY
RTS14YY
YY = width (mm) x type (mm): 11 - 600 wide - Acrylic 21 - 600 wide - Steel 23 - 600 wide - Perforated
12 - 800 wide - Acrylic 22 - 800 wide - Steel 14 - 800 wide - Perforated
Note: Add -BIFOLD for bi-fold door. Add -HF for high flow perforated door.
See page 18 for icon descriptions
[email protected]
59
R T S P L I T C A B I N E T GALLERY
RT split cabinet
RT split cabinet
2-way split cabinet
3-way split cabinet
iq 2-way split Cabinet
Split Cabinet 800 wide
steel doors
perforated doors
side panels
perforated doors
acrylic doors
bi-fold doors
W A L L cab i n e t s and accessories WR (wall Rack) WE (Wall Enclosure) wall frames - 600 wide Wall Cabinet Accessories
www.racktechnologies.com.au
W R wall Rack STANDARD INCLUSIONS: • Cabinet frame • Door with lock • Front mounting rails • Removable side panels with lock
standard configurations width: 580mm choose Height: 6RU, 9RU, 12RU, 18RU or 24RU choose Depth: 350mm, 450mm or 600mm Colour: Ripple black Door: Acrylic, steel or perforated Lock: Cam lock (standard) Bi-lock and 3-point locking (available on request)
Fan Knock-outs: 600 deep comes with 2-fan knockouts. All others come with 1-fan knock-out. mounting Rail: Part number WR**41
Description WR mounting rail in pairs
optional extras Hinge/Wall Bracket: Part number WR**44
Description 65mm deep
Back Panel: Part number WR**47
Description Flat back panel for added security
Note: ** = height of cabinet in RU.
62
Ph: +612.8805.0050
Features: • Quick release door hinges make for ease of installation • Acrylic, steel or perforated doors available, left or right swing • Hinge wall bracket is lockable and contains knock-outs for cable entry • Hinge wall bracket adds 60mm to the depth • All cabinets come with knock-outs
6RU wall RACK configurations Part number WR0611 WR0613 WR0614 WR0615 WR0617 WR0618 WR0619 WR0622 WR0623 WR0624 WR0625 WR0627 WR0628 WR0629 WR0633 WR0634 WR0635 WR0637 WR0638 WR0639 WR0641 WR0642 WR0643 WR0644 WR0647 WR0649 WR0651
Ext. Dim. (mm) (h) x (w) x (d) 350 x 580 x 350 350 x 580 x 350 350 x 580 x 350 350 x 580 x 350 350 x 580 x 350 350 x 580 x 350 350 x 580 x 350 350 x 580 x 450 350 x 580 x 450 350 x 580 x 450 350 x 580 x 450 350 x 580 x 450 350 x 580 x 450 350 x 580 x 450 350 x 580 x 600 350 x 580 x 600 350 x 580 x 600 350 x 580 x 600 350 x 580 x 600 350 x 580 x 600 6RU 6RU 6RU 6RU 6RU 6RU 6RU
Description Body, (frame, sides and rails) Body and acrylic door Body and steel door Body and perforated door Body, perforated door and hinge Body, acrylic door and hinge Body, steel door and hinge Body, (frame, sides and rails) Body and acrylic door Body and steel door Body and perforated door Body, perforated door and hinge Body, acrylic door and hinge Body, steel door and hinge Body and acrylic door Body and steel door Body and perforated door Body, perforated door and hinge Body, acrylic door and hinge Body, steel door and hinge Shelf rail (2 sets) Steel door Acrylic door Hinge frame Back plate Perforated door Cable tray
• Door flush frame • Welded body, removable sides, adjustable shelf rails • Cabinet can be fixed directly to the wall or attached to a hinge wall bracket • Fan filters are available
9RU wall RACK configurations Part number WR0911 WR0913 WR0914 WR0915 WR0917 WR0918 WR0919 WR0922 WR0923 WR0924 WR0925 WR0927 WR0928 WR0929 WR0933 WR0934 WR0935 WR0937 WR0938 WR0939 WR0941 WR0942 WR0943 WR0944 WR0947 WR0949 WR0951
Ext. Dim. (mm) (h) x (w) x (d) 485 x 580 x 350 485 x 580 x 350 485 x 580 x 350 485 x 580 x 350 485 x 580 x 350 485 x 580 x 350 485 x 580 x 350 485 x 580 x 450 485 x 580 x 450 485 x 580 x 450 485 x 580 x 450 485 x 580 x 450 485 x 580 x 450 485 x 580 x 450 485 x 580 x 600 485 x 580 x 600 485 x 580 x 600 485 x 580 x 600 485 x 580 x 600 485 x 580 x 600 9RU 9RU 9RU 9RU 9RU 9RU 9RU
Description Body, (frame, sides and rails) Body and acrylic door Body and steel door Body and perforated door Body, perforated door and hinge Body, acrylic door and hinge Body, steel door and hinge Body, (frame, sides and rails) Body and acrylic door Body and steel door Body and perforated door Body, perforated door and hinge Body, acrylic door and hinge Body, steel door and hinge Body and acrylic door Body and steel door Body and perforated door Body, perforated door and hinge Body, acrylic door and hinge Body, steel door and hinge Shelf rail (2 sets) Steel door Acrylic door Hinge frame Back plate Perforated door Cable tray
[email protected]
63
W R wall Rack
12RU
wall RACK configurations
Part number WR1211 WR1213 WR1214 WR1215 WR1217 WR1218 WR1219 WR1222 WR1223 WR1224 WR1225 WR1227 WR1228 WR1229 WR1232 WR1233* WR1234
Ext. Dim. (mm) (h) x (w) x (d) 617 x 580 x 350 617 x 580 x 350 617 x 580 x 350 617 x 580 x 350 617 x 580 x 350 617 x 580 x 350 617 x 580 x 350 617 x 580 x 450 617 x 580 x 450 617 x 580 x 450 617 x 580 x 450 617 x 580 x 450 617 x 580 x 450 617 x 580 x 450 617 x 580 x 600 617 x 580 x 600 617 x 580 x 600
WR1235
617 x 580 x 600
WR1237
617 x 580 x 600
WR1238
617 x 580 x 600
WR1239
617 x 580 x 600
WR1241 WR1242 WR1243 WR1244 WR1247 WR1249 WR1251
12RU 12RU 12RU 12RU 12RU 12RU 12RU
Description Body, (frame, sides and rails) Body and acrylic door Body and steel door Body and perforated door Body, perforated door and hinge Body, acrylic door and hinge Body, steel door and hinge Body, (frame, sides and rails) Body and acrylic door Body and steel door Body and perforated door Body, perforated door and hinge Body, acrylic door and hinge Body, steel door and hinge Body, (frame, sides and rails) Body, acrylic door and 4 shelf rail Body, steel door and 4 shelf rail Body, perforated door and 4 shelf rail Body, perforated door, 4 shelf rail and hinge Body, acrylic door, 4 shelf rail and hinge Body, steel door, 4 shelf rail and hinge Shelf rail (2 sets) Steel door Acrylic door Hinge frame Back plate Perforated door Cable tray
* Provision for 2-fan unit. Others with 1-fan
64
Ph: +612.8805.0050
18RU
wall RACK configurations
Part number WR1811 WR1813 WR1814 WR1815 WR1817 WR1818 WR1819 WR1822 WR1823 WR1824 WR1825 WR1827 WR1828 WR1829 WR1833* WR1834 WR1835
Ext. Dim. (mm) (h) x (w) x (d) 884 x 580 x 350 884 x 580 x 350 884 x 580 x 350 884 x 580 x 350 884 x 580 x 350 884 x 580 x 350 884 x 580 x 350 884 x 580 x 450 884 x 580 x 450 884 x 580 x 450 884 x 580 x 450 884 x 580 x 450 884 x 580 x 450 884 x 580 x 450 884 x 580 x 600 884 x 580 x 600 884 x 580 x 600
WR1837
884 x 580 x 600
WR1838
884 x 580 x 600
WR1839
884 x 580 x 600
WR1841 WR1842 WR1843 WR1844 WR1846 WR1847 WR1849 WR1851
18RU 18RU 18RU 18RU 18RU 18RU 18RU 18RU
Description Body, (frame, sides and rails) Body and acrylic door Body and steel door Body and perforated door Body, perforated door and hinge Body, acrylic door and hinge Body, steel door and hinge Body, (frame, sides and rails) Body and acrylic door Body and steel door Body and perforated door Body, perforated door and hinge Body, acrylic door and hinge Body, steel door and hinge Body, acrylic door and 4 shelf rail Body, steel door and 4 shelf rail Body, perforated door and 4 shelf rail Body, perforated door, 4 shelf rail and hinge Body, acrylic door, 4 shelf rail and hinge Body, steel door, 4 shelf rail and hinge Shelf rail (2 sets) Steel door Acrylic door Hinge frame Steel door, 3 point lock Back plate Perforated door Cable tray
* Provision for 2-fan unit. Others with 1-fan
24RU Part number WR2422 WR2423 WR2424 WR2425 WR2427 WR2428 WR2429 WR2433 WR2434 WR2435 WR2437 WR2438 WR2439 WR2441 WR2442 WR2443 WR2444 WR2447 WR2449 WR2451
wall RACK configurations
Ext. Dim. (mm) (h) x (w) x (d) 950 x 580 x 450 950 x 580 x 450 950 x 580 x 450 950 x 580 x 450 950 x 580 x 450 950 x 580 x 450 950 x 580 x 450 950 x 580 x 600 950 x 580 x 600 950 x 580 x 600
Description
Body, (frame, sides and rails) Body and acrylic door Body and steel door Body and perforated door Body, perforated door and hinge Body, acrylic door and hinge Body, steel door and hinge Body, acrylic door and 4 shelf rail Body, steel door and 4 shelf rail Body, perforated door and 4 shelf rail Body, perforated door, 4 shelf rail and 950 x 580 x 600 hinge Body, acrylic door, 4 shelf rail and 950 x 580 x 600 hinge 950 x 580 x 600 Body, steel door, 4 shelf rail and hinge 24RU Shelf rail (2 sets) 24RU Steel door 24RU Acrylic door 24RU Hinge frame 24RU Back plate 24RU Perforated door 24RU Cable tray
See page 18 for icon descriptions
[email protected]
65
66
Ph: +612.8805.0050
R T wall f ram e s 600 wide STANDARD INCLUSIONS: • Cabinet frame only Features: • All wall frames swing at 180° degrees • Lids can be used top or bottom • Most suitable for patching • All fasteners provided
standard configurations Width: 483mm choose Height: 2RU, 4RU or 6RU choose Depth: 100mm, 200mm or 300mm Colour: Grey nurse (standard colour)
Wall frame lid available on request.
600 WIDE WALL FRAMES Part number
RU
WF201 WF202 WF203 WF401 WF402 WF403 WF601 WF602 WF603
2RU 2RU 2RU 4RU 4RU 4RU 6RU 6RU 6RU
Ext. Dim. (mm) (h) x (w) x (d) 90 x 483 x 100 90 x 483 x 200 90 x 483 x 300 179 x 483 x 100 179 x 483 x 200 179 x 483 x 300 268 x 483 x 100 268 x 483 x 200 268 x 483 x 300
600 WIDE WALL FRAME LIDS Part number WFL11 WFL21 WFL31
Ext. Dim.(mm) (h) x (w) 483 x 100 483 x 200 483 x 300
Description Suits 100 deep wall frame Suits 200 deep wall frame Suits 300 deep wall frame See page 18 for icon descriptions
[email protected]
67
R T wall cab i n e t ACCESSORIES blank panels tool-less
Features: • Can be used with all 19" shape equipment rails • All fasteners provided • Quick release • No tool required for mounting or dismounting
horizontal brush cable entry
Features: • Can be used with all 19" shape equipment rails • Allows cable to penetrate the cabinet while preventing dust ingress • Helps prevent recirculation of hot air in cabinet • Enables better management of cold air circulation in cabinet • Aids front to rear cable entry • All fasteners provided
fan filter
Features: • Not suitable for 2-fan cantilever shelves • Prevent dust ingress into cabinet by filtering and blocked micro particles
68
Ph: +612.8805.0050
Suitable for 600 wide cabinets Part number RU x (w) (mm) 9041-T 1RU x 483 9042-T 2RU x 483 9043-T 3RU x 483 9044-T 4RU x 483 9202-T 6RU x 483
Part number 9284 9285
Part number 9076
Slot Dim. (mm) RU x (w) x (slot) 1RU x 390 x 25 2RU x 390 x 60
Description 2-fan unit
fan kits
(1-fan unit kit) 120mm
40mm
fan kits
(2-fan unit kit) 122mm
319mm
42mm
ru MOUNTABLE 2-fan (cantilever shelf)
19"
170mm 47mm
Features: • Improves air flow • Low noise level fans • Safety protected finger guards fully installed, top and bottom • Supplied as complete; with 2.5 metre lead and 3-pin plug • Whisper-quiet fans are available on request for sensitive office environments
Features: • Improves air flow • Totally flush on top panel • Low noise level fans • Safety protected finger guards fully installed top and bottom • Supplied as complete; with 2.5 metre lead and 3-pin plug • Whisper-quiet fans are available on request, for sensitive office environments • Thermostat available
Features: • Rectifies hot spots in cabinets • Whisper-quiet fans are available on request, for sensitive office environments
Part number 9181 9181-W 9181-TH 9181-W-TH
Description Single fan kit Single fan kit - whisper Single fan kit thermostatic Single fan kit whisper / thermostatic
WHISPER FAN
Part number RT9182 RT9182-TH RT9182-W RT9182-W-TH
Description Thermostat Whisper Thermostat / whisper
WHISPER FAN
Note: Blocking plate supplied part number: 01-2550
Part number 9020 9020-W 9020-TH 9020-W-TH
Description 2-fan unit 2-fan unit - whisper 2-fan unit - thermostatic 2-fan unit whisper / thermostatic
• Thermostat option available • Supplied as complete; with 2.5 metre lead and 3-pin plug • Dimensions: 1RU x 170mm deep • Fits all standard 19” equipment rails
[email protected]
WHISPER FAN
69
R T wall cab i n e t ACCESSORIES cantilever shelves
Features: • Easily installed • All fasteners included • Suitable for all cabinets
• Suitable for wall mount frames • Suitable for all open and iQ frames • Vented for better cooling
Part number 9121 9022 9023
cable trays
bumpon20
(placing wall mount on floor)
70
Features: • Easily installed • All fasteners included • Double folded edge for cable safety • Available in 12RU, 18RU, 27RU, 38RU, 42RU and 45RU
Features: • Enables door to be opened when cabinet is placed on the floor
Ph: +612.8805.0050
Dim. (mm) RU x (w) x (d) 1RU x 483 x 170 2RU x 483 x 275 3RU x 483 x 390
Part number WC**51 WC**52 WC**53
Load capacity 20kg 25kg 30kg
Width (mm) 150 225 300
Note: ** = height of cabinet in RU.
Part number Bumpon20
Dim. (mm) (h) x (w) x (thick) 20 x 20 x 7
R T NOTES
[email protected]
71
R T NOTES
O P E N F R A M ES and accessories RT Open Frame Series iQ Open Frame Series Open Frame Gallery
www.racktechnologies.com.au
R T op e n f ram e series STANDARD INCLUSIONS: • Cabinet frame • Flat pack format only
standard configurations
features: • Ideal for installation where access is a priority and space is at a premium • Footprint of open frame feet is 500mm deep and 630mm wide
width: 510mm choose Height: 24RU, 38RU or 45RU Depth: 150mm choose Colour: Grey nurse (standard colour) Ripple black (optional) In Flat Pack Format Only: Perfect for limited access to sites and and easily assembled
optional extras Cable Manager: Cable management ring
(for cable management rack only)
Features • Channel and rings are designed to provide cable management between open frames • Channel is available in nurse grey • Rings are available in black OPEN FRAME RACK Part number OF2401 OF3801 OF4501
74
RU 24 38 45
OPEN FRAME CABLE MANAGEMENT RACK
Ext. Dim. (mm) (h) x (w) x (d) 1210 x 510 x 150 1830 x 510 x 150 2145 x 510 x 150
Part number OF2403 OF3803 OF4503 9138
Ph: +612.8805.0050
RU 24 38 45 -
Ext. Dim. (mm) (h) x (w) x (d) 1210 x 110 x 150 1830 x 110 x 150 2145 x 110 x 150 145 (w) x 115 (d)
Cable management ring part number: 9138
See page 18 for icon descriptions
i Q op e n f ram e series STANDARD INCLUSIONS: • Cabinet frame The iQ Open Frame 2-post and 4-post racks are designed to accommodate server/active equipment, while still providing a high cable capacity or cable management solution. See page 76 for recommended assembly configuration. For more information, refer to our iQ Catalogue on page 9.
standard configurations Width: 515mm choose Height: 38RU, 45RU or 52RU Depth: 145mm Colour: Ripple black
optional extras Cable Manager: The T-finger horizontal/vertical cable management system are designed to handle high density cabling for termination or patching applications. See page 83
iQ Cable Management: Can be fitted to 2-post and 4-post open frames, both front and rear, as well as being bayed together with another 2-post or 4-post rack. See page 9 for iQ Catalogue. IQ SERIES 2-POST FRAME Part number
RU
iQOF3801 iQOF4501 iQOF5201
38RU 45RU 52RU
IQ SERIES 4-POST FRAME Ext. Dim. (mm) (h) x (w) x (d) 1748 x 515 x 145 2150 x 515 x 145 2465 x 515 x 145 See page 18 for icon descriptions
[email protected]
75
R T O P E N F R A M E GALLERY
RT series open frame 2-post frame
RT series open frame
2-post frame with cable management
iQOF9501 iQOF9503 iQOF9502
iQOF4501
iQOF4520
iQOF4540
IQ SERIES OPEN FRAME 2-post frame
iQOF9504 iQOF9505
IQ SERIES OPEN FRAME 4-post frame
Note: Above is the recommended assembly configuration.
CABLE MANAGEMENT Cable Managers
www.racktechnologies.com.au
R T cabl e managers 1ru ring panel
Features: • 4 horizontal and 2 vertical combined cable rings can be re-configured • Can be used with all 19" cabinets and wall mounted frames
Suitable for 19" cabinets Part number RU 9045 1RU
2ru ring panel
Features: • Combined cable rings can be re-configured • Can be used with all 19" cabinets and wall mounted frames
Suitable for 19" cabinets Part number RU 9047 2RU
cable management ring 19" and 26"
Features: • Retains cable in an orderly manner • Designed to maximise area for vertical cable management, between shelf rails and side panels Part number 9403-VL 9048-V 9046-VL
78
Ph: +612.8805.0050
Int. Dim. (mm) (w) x (d) 30 x 150 (internal) 140 x 150 (internal) 55 x 150 (internal)
• All fasteners provided • Zinc annealed steel
Description 19" (600mm wide) vertical 26" (800mm wide) vertical 26" (800mm wide) vertical
1ru cable management ‘plus’
Features: • Combined cable rings can be re-configured • Can be used with all 600mm wide cabinets and wall mounted frames • A combination of horizontal and vertical cable management
1ru and 2ru slotted cable manager
Features: • All metal construction is superior to plastic counterparts • Easy snap fit
1ru and 2ru slotted cable manager
Features: • Cable rings are sold separately and snap into all standard cagenut holes • Used for vertical cable management
Suitable for 600 wide cabinets Part number RU 9010 1RU
Part number 9218 9198
Part number 9046 9048
[email protected]
RU 1RU 2RU
Dim. (mm) RU 1RU 2RU
79
R T cabl e managers 1ru SINGLE cable manager with bracket
Features: • Mount to side of ‘L’ rail • Finger can be rotated 90° degrees
cable trays
Features: • Easily installed • All fasteners included • Double folded edge for cable safety • Available in 12RU, 18RU, 27RU, 38RU, 42RU and 45RU
Cable Hanger 60mm 60mm
Features: • A cable management solution for use in high density cable applications
600mm
80
Ph: +612.8805.0050
Part number 9046-VWC
Part number RT**51 RT**52 RT**53 RT**54
Width (mm) 150 225 300 450
Note: ** = height of cabinet in RU
Part number 9199
Large Telescopic chimney
Features: • Adjustable height; upto 772mm • Use with top panel shown Part number S-TOPCD500772-BL Top panel: Use top panel with large telescopic chimney: knock-outs add -RC to standard top panel part number. Example: RT45**-RC Note: ** = depth of top panel. 600 deep only available in 2-fans. 800 deep only available in 2 or more fans.
telescopic chimney
FIXED cabinet chimney
Features: • Adjustable height; upto 1270mm • Can be retrofitted around an existing cable installation • Large cable access area: 28,125 sq. mm • Easily suits cable entry on top panel • Standard top panel
Dim. (mm) (h) x (w) x (d) 500 x 305 x 325
Note: Chimney height adjustable from 500mm (h) to 772mm (h).
Part number 9230
Dim. (mm) (h) x (w) x (d) 750 x 375 x 75
Note: Chimney height adjustable from 750mm (h) to 1270mm (h).
Features: • To facilitate and enclose cable entry, from ceiling to cabinet • Applies only to the freestanding cabinet range • All fasteners provided • Custom sizes upon request • Easily suits cable entry on top panel • Standard top panel
[email protected]
81
R T cabl e managers t-finger cable management Vertical
Features: • Designed to handle high density cabling, for termination or patching applications • Fits neatly alongside vertical rails within 600mm wide cabinets • All fasteners provided Note: 93mm T-finger standard; for 145mm, add -150 to part number. For more cable management use the 146 T-finger, add -150 to part number.
Suitable for 600 wide cabinets Dim. (mm) Part number RU (w) x (d) iQCM1870-RT 18RU 40 x 155 iQCM2770-RT 27RU 40 x 155 iQCM3870-RT 38RU 40 x 155 iQCM4270-RT 42RU 40 x 155 iQCM4570-RT 45RU 40 x 155 iQCM1870-150-RT 18RU 40 x 205 iQCM2470-150-RT 24RU 40 x 205 iQCM3070-150-RT 30RU 40 x 205 iQCM3870-150-RT 38RU 40 x 205 iQCM4570-150-RT 45RU 40 x 205
t-finger cable management Horizontal
82
Features: • Supports and ensures bending radii are met • Routing of cable to maximise capacity
Ph: +612.8805.0050
Suitable for 800 wide cabinets Dim. (mm) Part number RU (w) x (d) iQCM1860 18RU 80 x 155 iQCM2760 27RU 80 x 155 iQCM3860 38RU 80 x 155 iQCM420 42RU 80 x 155 iQCM4560 45RU 80 x 155 iQCM1860-150 18RU 80 x 205 iQCM2460-150 24RU 80 x 205 iQCM3060-150 30RU 80 x 205 iQCM3860-150 38RU 80 x 205 iQCM4560-150 45RU 80 x 205
Suitable for 600 wide cabinets Part number RU Dim. (mm) iQOF9509 1RU 130 usable depth iQOF9502 2RU 130 usable depth iQOF9512 4RU 130 usable depth iQOF9509-150 1RU 183 usable depth iQOF9502-150 2RU 183 usable depth iQOF9512-150 4RU 183 usable depth
t-finger cable management
Features: • Suitable for 600mm and 800mm wide cabinets only
Part number iQCM08100 iQCM08100-150
Description 93mm T-finger 8RU single module 146mm T-finger 8RU single module
Note: (iQCM45100) add -150 for longer fingers; for single side, 45RU.
Single modular
T-fingers
roof brushed cable entry
Features: • Protects cable bundles on cabinet entry • Reduces dust infiltration into the cabinet • Easy to mount • Nylon brush
CABLE SLACK Spool
Features: • Supports and ensures bending radii are met • Neatly attaches to vertical cable managers and cable hanging brackets
Part number 9286
Part number iQOF9506 iQOF9507 iQOF9508
Slot Dim. (mm) (w) x (d) 219 x 78
Description 70mm (L) 140mm (L) 210mm (L) for extended fingers and brackets only
Note: Vertical cable managers have pre-manufactured cable slack spool mounting holes.
[email protected]
83
R T cabl e managers fixed fibre enclosure
Note: Fibre enclosures come unloaded.
sliding fibre enclosure
Note: Fibre enclosures comes with unloaded mounts on 1RU; however, the telescopic arms slightly protrude 1RU.
84
Ph: +612.8805.0050
Features: • Suitable for all 600mm wide cabinets • Internal cable management • Able to accommodate splice cassettes • Four entry points Part number
Dim. (mm) (RU) x (w) x (d)
9049
1RU x 600 x 220
9064
1RU x 600 x 200
9065
1RU x 600 x 220
9066
1RU x 600 x 200
9067
1RU x 60 x 200
9060
1RU x 600 x 200
9263
1RU x 600 x 200
Description • 16-way ST fixed fibre tray with cable management • Accepts 16x ST couplers • 16-way ST fixed fibre tray with lid • Accepts 16x ST couplers • 24-way ST fixed fibre tray with lid • Accepts 24x ST couplers • 24-way SC fixed fibre tray • Holds 12x duplex couplers • 12-way ST fixed fibre tray with lid • Accepts 16x ST couplers • 12-way SC fixed fibre tray with lid • Holds 6x duplex couplers • 24-way LC duplex fixed fibre tray • Holds 24x LC duplex couplers • Can also hold 24x SC simplex couplers
Features: • Suitable for all 600mm wide cabinets • Internal cable management • Able to accommodate splice cassettes • Four entry points • Clamps, glands, brass tubes and screws included Part number
Dim. (mm) (RU) x (w) x (d)
9053
1RU x 600 x 310 (overall)
9054
1RU x 600 x 310 (overall)
9055
1RU x 600 x 310 (overall)
9068
1RU x 600 x 310 (overall)
9056
1RU x 600 x 308 (overall)
Description • 16-way sliding fibre tray • Accepts 16x ST couplers • 24-way ST sliding fibre tray • Accepts 24x ST couplers • 24-way SC Duplex sliding fibre tray • Holds 12x duplex coupler • 12-way SC sliding fibre tray • Holds 6x duplex couplers • 24-way LC duplex sliding fibre tray • Holds 24x LC duplex couplers • Can also hold 24x SC simplex couplers
Fibre rack
Features: • Secure carrier-PABX distribution enclosure • Rack mounting capability • Provisioned for cooling options and cable management
Part number 9411
Features: • Secure fibre (floor) distributor and reticulaation • Up to 196 fibre count • High density LC duplex form • Splice trays and fibre management included
Part number 9410
Features: • Body: with 25.4mm EKO’S • Polycarbonate clear cover 2-point ROTO seal holes • Sliding covers • Cable management ring kit • Face plates ordered separately, see page 86
Part number 9362S - **
View 2: Inside fibre rack
View 1: Front
Fibre box
View 1: Front View 2: Inside fibre box
Fibre termination box
Note: ** = colour code Example: 9362S-RD
[email protected]
85
R T cabl e managers face plates
Features: • Laser cut knock-outs allow single or multiple connector use
Part number 9362-00-** 9362-01-** 9362-02-** 9362-03-** 9362-04-**
Description 8 x SC duplex 4 x RJ 45 plate 8 x Simplex SC/ duplex LC / MTRJ Blank with Ø 25.4 EKO 8 x ST plate
Note: ** = colour code Example: 9362-01-RD
86
lacing bar
Features: • 19" racks mountable • Used for cable management at the rear of a patch panel • All fasteners provided
Suitable for 19" cabinets Dim. (mm) Part number (RU) x (h) 9091 1RU x 483
bezels
Features: • To suit keystone jack adaptor; 20 per pack
Part number 50019601W 50019601Y 50019601BL 50019601BK
Ph: +612.8805.0050
Colour White Yellow Blue Black
coyote® runt closure
Features: • Flat, compact and strong • Slimline IP67/68 • Includes lock • Tape sealant, bond brackets and transporting tubing included
Part number
Description c/w 1x12 fibre splice tray
RTT8006671-112
application: • Perfect for a low count fibre distribution network
coyote® splice tray
Features: • Compact yet spacious • Multi-entry points • Comes with labels and cable ties • Splice kit (12 count), includes splice tray elastomer splice block, felt tape, tie wraps, cover and recording label
Part number RTT80806033
application: • For use in fibre distribution
Coyote® Protector holder (optional)
Features: • Holder kit 36 fibre; 3 x 12 count block • 3 of 12 holders in a pack • Fiberlign fusion splice protector snaps right in • Adhesive backing
Part number RTT8003381
Description Fiberlign fusion splice protector 250/250 or 250/900 micron: 20 per pack
[email protected]
87
iQ Cable Capacity Table vertical cable managers for open frames Cable manager specs Interior width (mm)
Interior depth (mm)
Usable area (sq.mm.)
Recommended cable capacity
Maximum cable capacity
Cat 5e
Cat 6
Cat 6a
Cat 7/6a shielded
Cat 5e
Cat 6
Cat 6a
Cat 7/6a shielded
5.5
6.2
8.5
7.5
5.5
6.2
8.5
7.5
50%
50%
50%
50%
100%
100%
100%
100%
Part number
Description
iQOF3820
38RU 150mm wide cab/man 93mm T-fingers
131.00
173.0
22663.0
238
188
100
128
477
375
200
256
iQOF3840
38RU 300mm wide cab/man 93mm T-fingers
281.00
173.0
48613.0
512
403
214
275
1023
805
428
550
iQOF3850
38RU 400mm wide cab/man 93mm T-fingers
381.00
173.0
65913.0
694
546
290
373
1387
1092
581
746
iQOF3820-150
38RU 150mm wide cab/man 146mm T-fingers
131.00
235.0
30785.0
324
255
136
174
648
510
271
348
iQOF3840-150
38RU 300mm wide cab/man 146mm T-fingers
281.00
235.0
66035.0
695
547
291
374
1390
1094
582
747
iQOF3850-150
38RU 400mm wide cab/man 146mm T-fingers
381.00
235.0
89535.0
942
741
394
507
1884
1483
789
1013
iQOF4520
45RU 150mm wide cab/man 93mm T-fingers
131.00
173.0
22663.0
238
188
100
128
477
375
200
256
iQOF4540
45RU 300mm wide cab/man 93mm T-fingers
281.00
173.0
48613.0
512
403
214
275
1023
805
428
550
iQOF4550
45RU 400mm wide cab/man 93mm T-fingers
381.00
173.0
65913.0
694
546
290
373
1387
1092
581
746
iQOF4520-150
45RU 150mm wide cab/man 146mm T-fingers
131.00
235.0
30785.0
324
255
136
174
648
510
271
348
iQOF4540-150
45RU 300mm wide cab/man 146mm T-fingers
281.00
235.0
66035.0
695
547
291
374
1390
1094
582
747
iQOF4550-150
45RU 400mm wide cab/man 146mm T-fingers
381.00
235.0
89535.0
942
741
394
507
1884
1483
789
1013
Note: -150 denotes longer finger.
vertical cable managers for cabinets Cable manager specs Part number
Description
Interior width (mm)
Interior depth (mm)
Recommended cable capacity Cat 5e
Cat 6
Cat 6a
Cat 7/6a shielded
Maximum cable capacity Cat 5e
Cat 6
Cat 6a
Cat 7/6a shielded
5.5
6.2
8.5
7.5
5.5
6.2
8.5
7.5
50%
50%
50%
50%
100%
100%
100%
100%
iQCM3870
38RU 600mm wide cabinets 93mm T-fingers
28.50
122.0
3477.0
37
29
15
20
73
58
31
39
iQCM3860
38RU 800mm wide cabinets 93mm T-fingers
61.50
158.5
9747.8
103
81
43
55
205
161
86
110
iQCM3870-150
38RU 600mm wide cabinets 146mm T-fingers
28.50
184.0
5244.0
55
43
23
30
110
87
46
59
iQCM3860-150
38RU 800mm wide cabinets 146mm T-fingers
61.50
220.5
13560.8
143
112
60
77
285
225
119
153
iQCM4570
45RU 600mm wide cabinets 93mm T-fingers
28.50
122.0
3477.0
37
29
15
20
73
58
31
39
iQCM4560
45RU 800mm wide cabinets 93mm T-fingers
61.50
158.5
9747.8
103
81
43
55
205
161
86
110
iQCM4570-150
45RU 600mm wide cabinets 146mm T-Fingers
28.50
184.0
5244.0
55
43
23
30
110
87
46
59
iQCM4560-150
45RU 800mm wide cabinets 146mm T-fingers
61.50
220.5
13560.8
143
112
60
77
285
225
119
153
Note: -150 denotes longer finger.
88
Usable area (sq.mm.)
Ph: +612.8805.0050
PART Number INDEX Part number
Page
Part number
Page
Part number
Page
Part number
Page
9006
40
9088
48
9503-CAPT
42
iQCM2470-150-RT
46 / 82
9007
40
9091
86
9503-IEC
42
iQCM2760
46 / 82
9010
79
9095
50
9503-IEC/15AMP
42
iQCM2770-RT
46 / 82
9017
54
9103
40
9504
42
iQCM3060-150
46 / 82
9020
40 / 69
9105
40
9504-15AMP
42
iQCM3070-150-RT
46 / 82
9020-TH
40 / 69
9121
48 / 70
9504-20AMP
42
iQCM3860
46 / 82
9020-W
40 / 69
9121-600
48
9504-CAPT
42
iQCM3860-150
46 / 82
9020-W-TH
40 / 69
9121-700
48
9504-IEC
42
iQCM3870-150-RT
46 / 82
9022
48 / 70
9138
74
9504-IEC/15A
42
iQCM3870-RT
46 / 82
9023
48 / 70
9160
50
9505
42
iQCM420
46 / 82
9024
48
9161
50
9505-15AMP
42
iQCM4270-RT
46 / 82
9025
48
9161-400
50
9505-20AMP
42
iQCM4560
46 / 82
9026
48
9161-700
50
9505-CAPT
42
iQCM4560-150
46 / 82
9028
48
9166
48
9505-IEC
42
iQCM4570-150-RT
46 / 82
9029
48
9198
79
9505-IEC/15A
42
iQCM4570-RT
46 / 82
9038
52
9199
80
9508
45
iQOF3801
75
9039-M
55
9202-T
38 / 68
9508-15AMP
45
iQOF4501
75
9040-M
55
9218
79
9508-15AMP-IEC
45
iQOF5201
75
9041-T
38 / 68
9228
48
9508-20AMP
45
iQOF9502
46 / 82
9042-T
38 / 68
9229
48
9508-CAPT
45
iQOF9502-150
46 / 82
9043-T
38 / 68
9230
81
9508-IEC
45
iQOF9506
26 / 83
9044-T
38 / 68
9232
51
9509
45
iQOF9507
26 / 83
9045
78
9237
48
9509-15AMP
45
iQOF9508
83
9046
79
9237-100
48
9509-15AMP-IEC
45
iQOF9509
46 / 82
9046-VL
78
9250
54
9509-20AMP
45
iQOF9509-150
46 / 82
9046-VWC
80
9263
84
9509-CAPT
45
iQOF9512
46 / 82
9047
78
9280
51
9509-IEC
45
iQOF9512-150
46 / 82
9048
79
9284
39 / 68
9512
45
OF2401
74
9048-V
78
9285
39 / 68
9512-15AMP
45
OF2403
74
9049
84
9286
39 / 83
9512-15AMP-IEC
45
OF3801
74
9053
84
9287
39
9512-20AMP
45
OF3803
74
9054
84
9362-00-**
86
9512-CAPT
45
OF4501
74
9055
84
9362-01-**
86
9512-IEC
45
OF4503
74
9056
84
9362-02-**
86
9519-20A-BL
45
RT**51
47 / 80
9060
84
9362-03-**
86
9519-20A-RD
45
RT**52
47 / 80
9064
84
9362-04-**
86
9519-CBA-32A-BL
45
RT**53
47 / 80
9065
84
9362S - **
85
9519-CBA-32A-BL
45
RT**54
47 / 80
9066
84
9400
53
50019601BK
86
RT1200
25
9067
84
9401
52
50019601BL
86
RT1201
23
9068
84
9402
53
50019601W
86
RT1203
23
9073
52
9403-VL
78
50019601Y
86
RT1204
23
9074
54
9410
85
Bumpon20
70
RT1205
25
9075
54
9411
85
C**55
53
RT1206
25
9076
40 / 68
9502
42
iQCM**80
28
RT1207
25
9077
40
9502-15AMP
42
iQCM08100
47 / 83
RT1208
23
9078
81
9502-20AMP
42
iQCM08100-150
47 / 83
RT1209
25
9079
81
9502-CAPT
42
iQCM1860
46 / 82
RT1210
23
9080
48
9502-IEC
42
iQCM1860-150
46 / 82
RT1211
34
9080-ST
48
9502-IEC/15A
42
iQCM1870-150-RT
46 / 82
RT1212
34
9082
48
9503
42
iQCM1870-RT
46 / 82
RT1214
35
9086
48
9503-15AMP
42
iQCM2250
58
RT1221
34
9087
48
9503-20AMP
42
iQCM2460-150
46 / 82
RT1223
35
[email protected]
89
PART Number INDEX
90
Part number
Page
Part number
Page
Part number
Page
Part number
Page
RT1233
37
RT2721
34
RT4205-OFS
29
RT4522
34
RT1233-P
37
RT2722
34
RT4206
25
RT4522-HDC
27
RT1234
37
RT2723
35
RT4206-OFS
29
RT4523
35
RT1234-P
37
RT2733
37
RT4207
25
RT4533
37
RT1236
37
RT2733-P
37
RT4207-OFS
29
RT4533-P
37
RT1236-P
37
RT2734
37
RT4208
23
RT4534
37
RT1238
37
RT2734-P
37
RT4209
25
RT4534-P
37
RT1238-P
37
RT2736
37
RT4209-OFS
29
RT4536
37
RT1239
37
RT2736-P
37
RT4210
23
RT4536-P
37
RT1239-P
37
RT2738
37
RT4211
34
RT4538
37
RT1241
38
RT2738-P
37
RT4212
34
RT4538-P
37
RT1800
25
RT2739
37
RT4214
35
RT4539
37
RT1801
23
RT2739-P
37
RT4221
34
RT4539-P
37
RT1803
23
RT2741
38
RT4222
34
RT4541
38
RT1804
23
RT3800
25
RT4223
35
RT4583
38
RT1805
25
RT3800-OFS
29
RT4233
37
RT4584
38
RT1806
25
RT3801
23
RT4233-P
37
RT4585
38
RT1807
25
RT3803
23
RT4234
37
RT4586
38
RT1808
23
RT3804
23
RT4234-P
37
RT4589
38
RT1809
25
RT3805
25
RT4236
37
RT4590
38
RT1810
23
RT3805-OFS
29
RT4236-P
37
RT4591
38
RT1811
34
RT3806
25
RT4238
37
RT4592
38
RT1812
34
RT3806-OFS
29
RT4238-P
37
RT4595
38
RT1814
35
RT3807
25
RT4239
37
RT4596
38
RT1821
34
RT3807-OFS
29
RT4239-P
37
RT45XX-14-3
59
RT1822
34
RT3808
23
RT4241
38
RT45XX-22-2
59
RT1823
35
RT3809
25
RT4500
25
RT9051
51
RT1833
37
RT3809-OFS
29
RT4500-HDC
27
RT9052
51
RT1833-P
37
RT3810
23
RT4500-OFS
29
RT9069
51
RT1834
37
RT3811
34
RT4501
23
RT9150
51
RT1834-P
37
RT3812
34
RT4503
23
RT9151
51
RT1836
37
RT3814
35
RT4504
23
RT9152
51
RT1836-P
37
RT3821
34
RT4505
25
RT9153
51
RT1838
37
RT3822
34
RT4505-HDC
27
RT9156
51
RT1838-P
37
RT3823
35
RT4505-OFS
29
RT9174
51
RT1839
37
RT3833
37
RT4506
25
RT9175
51
RT1839-P
37
RT3833-P
37
RT4506-HDC
27
RT9182
41 / 69
RT1841
38
RT3834
37
RT4506-OFS
29
RT9182-TH
41 / 69
RT2222
34
RT3834-P
37
RT4507
25
RT9182-W
41 / 69
RT2700
25
RT3836
37
RT4507-HDC
27
RT9182-W-TH
41 / 69
RT2701
23
RT3836-P
37
RT4507-OFS
29
RT9183
41
RT2703
23
RT3838
37
RT4508
23
RT9183-TH
41
RT2704
23
RT3838-P
37
RT4509
25
RT9183-W
41
RT2705
25
RT3839
37
RT4509-HDC
27
RT9183-W-TH
41
RT2706
25
RT3839-P
37
RT4509-OFS
29
RT9186
41
RT2707
25
RT3841
38
RT4510
23
RT9186-TH
41
RT2708
23
RT4200
25
RT4511
34
RT9186-W
41
RT2709
25
RT4200-OFS
29
RT4512
34
RT9186-W-TH
41
RT2710
23
RT4201
23
RT4512-HDC
27
RTS14YY
59
RT2711
34
RT4203
23
RT4514
35
RTS22YY
59
RT2712
34
RT4204
23
RT4514-HDC-HF
27
RTT8003381
87
RT2714
35
RT4205
25
RT4521
34
RTT8006671-112
87
Ph: +612.8805.0050
PART Number INDEX Part number
Page
Part number
Page
Part number
Page
Part number
Page
RTT80806033
87
WR0649
63
WR1243
64
WR2451
65
S-KIT-SRL-01-500925
47
WR0651
63
WR1244
64
S-TF4540-01
30
WR0911
63
WR1247
64
S-TOPCD500772-BL
81
WR0913
63
WR1249
64
S-WE0427-ZZZ-01
66
WR0914
63
WR1251
64
S-WE0427-ZZZ-02
66
WR0915
63
WR1811
64
S-WE0627-ZZZ-01
66
WR0917
63
WR1813
64
S-WE0627-ZZZ-02
66
WR0918
63
WR1814
64
SCHEDULE
50
WR0919
63
WR1815
64
WC**51
70
WR0922
63
WR1817
64
WC**52
70
WR0923
63
WR1818
64
WC**53
70
WR0924
63
WR1819
64
WF201
67
WR0925
63
WR1822
64
WF202
67
WR0927
63
WR1823
64
WF203
67
WR0928
63
WR1824
64
WF401
67
WR0929
63
WR1825
64
WF402
67
WR0933
63
WR1827
64
WF403
67
WR0934
63
WR1828
64
WF601
67
WR0935
63
WR1829
64
WF602
67
WR0937
63
WR1833*
64
WF603
67
WR0938
63
WR1834
64
WFL11
67
WR0939
63
WR1835
64
WFL21
67
WR0941
63
WR1837
64
WFL31
67
WR0942
63
WR1838
64
WR**41
62
WR0943
63
WR1839
64
WR**44
62
WR0944
63
WR1841
64
WR**47
62
WR0947
63
WR1842
64
WR0611
63
WR0949
63
WR1843
64
WR0613
63
WR0951
63
WR1844
64
WR0614
63
WR1211
64
WR1846
64
WR0615
63
WR1213
64
WR1847
64
WR0617
63
WR1214
64
WR1849
64
WR0618
63
WR1215
64
WR1851
64
WR0619
63
WR1217
64
WR2422
65
WR0622
63
WR1218
64
WR2423
65
WR0623
63
WR1219
64
WR2424
65
WR0624
63
WR1222
64
WR2425
65
WR0625
63
WR1223
64
WR2427
65
WR0627
63
WR1224
64
WR2428
65
WR0628
63
WR1225
64
WR2429
65
WR0629
63
WR1227
64
WR2433
65
WR0633
63
WR1228
64
WR2434
65
WR0634
63
WR1229
64
WR2435
65
WR0635
63
WR1232
64
WR2437
65
WR0637
63
WR1233*
64
WR2438
65
WR0638
63
WR1234
64
WR2439
65
WR0639
63
WR1235
64
WR2441
65
WR0641
63
WR1237
64
WR2442
65
WR0642
63
WR1238
64
WR2443
65
WR0643
63
WR1239
64
WR2444
65
WR0644
63
WR1241
64
WR2447
65
63
WR1242
64
WR2449
65
WR0647
[email protected]
91
TERMS AND CONDITIONS OF SALE APPLICATION These Terms and Conditions of Sale (“Terms”) apply to all goods sold by Rack Technologies Pty Limited (“the Company”). “Goods” means all goods sold and/or delivered by the Company to the Customer from time to time. No amendment, alteration, waiver or cancellation of any of these Terms is binding on the Company unless confirmed by the Company in writing. The Customer acknowledges that no employee or agent of the Company has any right to make any representation, warranty or promise in relation of the Goods or the sale of the Goods other than as contained in these Terms. TERMS OF PAYMENT Prices quoted are subject to change without notice if the quantities on which the quotation has been based are varied. Prices quoted are strictly ex the Company’s premises at Glendenning, and do not include costs for packaging, delivery, freight, customs, duties, levies and/or insurance and are fixed for a period of thirty (30) days from the date of the quotation. Payments are to be made direct to the Company, strictly net, without any deduction or discount other than as stated herein or in the relevant invoice or statement. Payments are to be made within thirty (30) days of the date of the Company’s statement or invoice. Interest is payable on all overdue accounts calculated on a daily basis at the rate of 2% per month as from the due date for payment until payment is received by the Company. PROPERTY IN GOODS Legal and beneficial ownership of Goods supplied by the Company will not pass to the Customer until such time as the Goods so supplied and all other goods supplied by the Company to the Customer from time to time, have been paid in full in cash or cleared funds. RE-RE-SALE OF GOODS Should the Customer be a re-seller then, subject to sub-clause 4.2.4, the Customer has the right to sell the Goods in its own name at full market value and in the ordinary course of business. Until the amount payable to the Company in respect of the Goods, and in respect of allother goods previously supplied by the Company to the Customer, has been paid in full in cash or cleared fund: the Customer will hold the Goods only as bailee for the Company; the Goods must be stored in such manner that they are readily distinguishable from other goods owned by the Customer or other persons and so as to clearly show that they are the property of the Company; the Customer must indemnify the Company from and against any claim, action, proceeding, damage, loss, cost, expense or liability incurred or suffered by the Company arising out of the possession, use or disposal of the Goods by the Customer or repossession or attempted repossession of them by the Company; and any sale of the Goods under clause 4.1 will only be effected by the Customer as trustee for the Company and the proceeds of such sale and the rights of the Company’s Customer against its Customer arising from such sale will be held on trust for the Company. The said proceeds must be held in a separate account or otherwise clearly identified in the books and records of the Customer. If the Customer resells any Goods then, unless the Goods are clearly identifiable by serial numbers or other distinguishing marks, the Customer is deemed to have disposed of the Goods in the chronological order of supply by the Company to the Customer (oldest to most recent). DEFAULT If: the Goods are not paid for in accordance with these Terms or any other written agreement between the Company and the Customer; or the Company receives notice of, or reasonably believes that a third party may attempt to levy execution against or attach the Goods; or any other event occurs which is likely to adversely affect the Customer’s ability to pay for the Goods (including but not limited to the appointment of a receiver, receiver and manager, administrator, controller, liquidator, provisional liquidator, trustee or similar person (each an “insolvency representative”) to the Customer’s undertaking), then the Company may at any time thereafter, without notice to the Customer and without prejudice to any other rights which it may have against the Customer, terminate any contract relating to the Goods and the bailment referred to in clause 4.2. RIGHT TO ENTER PREMISES In any of the circumstances referred to in the preceding clause, the Customer: authorises the Company by itself, its agents or representatives at all reasonable times, without notice, to enter onto (with force if reasonably necessary) and at all necessary time/s), to remain in and on any premises where the Goods are located in order to collect the Goods, without being guilty of any manner of trespass; and assigns to the Company all the Customer’s rights to enter onto and remain in and on such premises until all the Goods have been collected. ADMINISTRATION, RECEIVERSHIP ETC. In any of the circumstances referred to in clause 5.3, neither the Customer nor its insolvency representative or any other person acting for the Customer and/or its creditors is entitled to sell, charge, remove, dispose of, use or otherwise deal with the Goods in any way inconsistent with the Company’s ownership of the Goods, without the Company’s prior written approval.
RACK TECHNOLOGIES ACN 059 514 733 RISK The Goods are entirely at the risk of the Customer from the moment the Goods leave the Company’s premises. INSPECTION Unless the Customer has inspected the Goods and given written notice to the Company within seven (7) days after collection or delivery that the Goods do not comply with the relevant specifications or descriptions, the Goods are deemed to have been accepted in good order and condition. CANCELLATION OF ORDER AND RETURN OF GOODS No order may be cancelled, modified or deferred without the prior written consent of the Company (at the Company’s sole discretion) and if such consent is given, it is at the Company’s election, subject to the Company being reimbursed all losses, including loss of profits, and paid a cancellation and restocking fee (being not less than 10% of the invoice value of the Goods). No returns will be accepted unless: the Company has previously agreed in writing; and the requested return of Goods occurs within 30 days from the date of delivery to the Customer. If the Company agrees to the return of Goods, the Goods must be unsoiled, undamaged and in a resaleable condition (or Customer pays for all costs of replacement or repair) and delivered free to the Company’s premises unless otherwise agreed by the Company in writing; and The Company may allow the Customer credit for returned Goods at the Company’s sole discretion, if: the original invoice number and date has been quoted by the Customer; the Goods have been returned to the Company’s premises within 30 days from the date of delivery to the Customer; where goods were supplied by the Company in special manufacturers cartons, the Goods have been returned in that carton in their original and unmarked condition complete with all instructions and other documents originally supplied with the Goods; and all charges for outward and inward freight, packing and delivery have been paid by the Customer where such freight, packaging and delivery are necessary. The Company will not allow a credit or return of the following Goods: Goods which are imported especially for the Customer or non-standard equipment made to special order; and Goods marked on the Company’s invoices as “NOT RETURNABLE”. all charges for outward and inward freight, packing and delivery have been paid by the Customer hereby allowed: Goods which cannot be returned include are: imported especially for the Customer or non-standard equipment made to special order; and Goods marked on the Company’s invoices as “NOT RETURNABLE” cannot be returned. Goods which imported especially for the Customer or non-standard equipment made to special order; and Goods marked on the Company’s invoices as “NOT RETURNABLE” cannot be returned. COMPANY’S LIABILITY LIMITED These Terms do not affect the rights, entitlements and remedies conferred by the Trade Practices Act (1974). The Company is not subject to, and the Customer releases the Company from any liability (including but not limited to consequential loss or damage, removal costs or re-installation costs or liability for loss of use or profit) because of any delay in delivery or fault or defect in the Goods. The Customer acknowledges that the Company is not responsible if the Goods do not comply with any applicable safety standard(s) or similar regulation(s), and that the Company is not liable for any claim, cost, damage or demand resulting from such non-compliance. If any statutory provisions under the Trade Practices Act 1974 or any other statute/s) apply to the Agreement then, to the extent to which the Company is entitled to do so, the Company’s liability under the statutory provisions is limited, at the Company’s option, to: replacement or repair of the Goods or the supply of equivalent Goods; or payment of the cost of replacing or repairing the Goods or of acquiring equivalent goods, and in either case, the Company will not be liable for any consequential or other direct or indirect loss or damage. WARRANTY The Company warrants to the Customer that the Goods will be supplied in an undamaged condition. On discovery of any defect in the Goods, the Customer must notify the Company in writing of such defect. All warranty claims must be received by the Company within thirty (30) days of the day of delivery. The Customer must not carry out any remedial work to alleged defective Goods without first obtaining the written consent of the Company to do so. The Customer’s failure to provide written notice to the Company within the required time of any alleged breach of the above warranty will release and discharge the Company from any obligation or liability for that breach of warranty. The above warranty extends only to the Customer and to no other person. The provisions of any act or law (including but not limited to the Trade Practices Act 1974) implying terms, conditions and warranties, or any other terms, conditions and warranties which might otherwise apply to or arise out of the agreement between the Company and the Customer in relation to the Goods (the “Agreement”) are hereby expressly negatived and excluded to the full extent permitted by law. The Customer expressly acknowledges and agrees that it has not relied upon, and the Company is not liable for any advice given by the Company, its servants, agents, representatives or employees in relation to the suitability for any purposes of the Goods.
The Customer, its insolvency representative or any other person acting for or on behalf of the Customer and/or its creditors is obliged to re-deliver the Goods to the Company immediately or immediately on his appointment at its or his expense.
CATALOGUES Particulars in leaflets, catalogues, drawings, brochures and other printed material are illustrations only, and form no part of the contract between the Company and the Customer, and are not binding on the Company.
If the Goods are returned to or collected by the Company, the Company will within 28 days, account to the Customer or its legal representative for all monies received for the Goods from the Customer less the Company’s reasonable administration charges, expenses incurred and loss of profits involved.
SAMPLES Any sample inspected by the Customer is solely for the Customer’s convenience and does not constitute a sale by sample. All samples remain the property of the Company.
CUSTOMER AS TRUSTEE If the Customer carries on business as trustee of a trust then the Customer warrants that: the Customer enters into the contract as trustee of a trust; the Customer has all requisite powers to enter into the contract; the beneficiary of the trust approves the purchase of the Goods on the terms of the contract; and the assets of the trust are available to the Company in satisfaction of any debt incurred by the Customer. SALES TAX AND GOODS AND SERVICES TAX Sales tax and Goods and Services tax [“GST”] are not included in the quoted price. Unless the Customer produces a Sales Tax Exemption Certificate applicable to the Goods and quotes its Sales Tax Exemption Number, the Customer must pay all sales tax payable for the Goods at the date of invoice.
SPECIFICATIONS Unless otherwise agreed in writing, the Goods are supplied subject to any specification as to weight, quantity, size, dimensions, finishes, chemical composition and physical properties as may be published generally by the Company or as may be set out in any specification issued by the Company in relation to the Goods, or, if no such specification has been published or set out, subject to such specification as is normally regarded as being commercially acceptable.
If GST is imposed on the Company in respect of the Goods then the Customer must pay to the Company the amount of such GST in addition to the quoted price. The Company must give the Customer written notice of the amount of any GST payable under this clause and provide a tax invoice showing the amount of GST payable. CUSTOMS DUTIES, TARIFFS AND LEVIES All applicable customs duties, tariffs and levies are payable by the Customer unless the order, order confirmation, invoice or other writing indicates otherwise. DELIVERY Availability dates are estimates only, but the Company will use its best endeavours to maintain these estimates.
Where any specification for the Goods are to be supplied by the Customer, they must be supplied in a reasonable time to enable the Company to complete delivery by the date for delivery. CONTRACT The terms of contract between the parties are wholly contained in these Terms and any other writing signed by both parties. The contract is deemed to have been made at the Company’s place of business in Sydney and any cause of action is deemed to have arisen there. The provisions of the United Nations Convention on contracts for the International Sale of Goods adopted at Vienna, Austria on 10 April 1980 do not apply to any Goods supplied by the Company to the Customer. FORCE MAJEURE The Company will not be liable for any breach of contract due to any matter or thing beyond the Company’s control (including but not limited to transport stoppages, transport breakdown, fire, flood, earthquake, acts of God, strikes, lock-outs, work stoppages, wars, riots or civil commotion, intervention of public authority, explosion or accident).
At the Customer’s request, the Company will arrange for the delivery of the Goods into the Customer’s store at the Company’s expense.
WAIVER OF BREACH No failure by the Company to insist on strict performances of any of the terms in these Terms is a waiver of any right or remedy which the Company may have, and is not a waiver of any subsequent breach or default by the Customer.
DELIVERY BY INSTALLMENTS The Company reserves the right to deliver the Goods in whole or by installments, as well as to deliver prior to the date for delivery and in such event the Customer must not refuse to take delivery of the Goods.
NO ASSIGNMENT Neither the Agreement nor any rights arising under the Agreement may be assigned by the Customer without the prior written consent of the Company which is at the Company’s absolute discretion.
Where the Goods are delivered by installments, each installment is sold under a separate contract. Any failure on the part of the Company to deliver installments within any specified time does not entitle the Customer to repudiate the contract with regard to the balance remaining undelivered.
SEVERABILITY If any provision contained in these Conditions of Sale is held by a court to be unlawful, invalid or unenforceable, the validity and enforceability of the remaining provisions are not affected. REF 000803
RT SERIES SYSTEM ENCLOSURES AND ACCESSORIES
SYDNEY OFFICE
190 Power Street Glendenning, NSW, 2761 PO Box 626 St Marys, NSW 1790 Ph: +612.8805.0050 Fax: +612.8805.0093 Email:
[email protected]
QUEENSLAND OFFICE 7/269 Abbotsford Road Bowen Hills QLD 4006 Ph: +617.3719.4000 Fax: +617.3852.4138 Email:
[email protected]
VICTORIA OFFICE
Unit 27/2 Enterprise Drive Bundoora, VIC 3083 Ph: +613.9467.6584 Fax: +613.9470.8872 Email:
[email protected]
RACK TECHNOLOGIES (Worldwide) • U.S.A. • Canada • Mexico • Brazil • Spain • Great Britain • Poland • South Africa • China • Indonesia • Malaysia • Thailand • Australia • New Zealand
NEW ZEALAND OFFICE
35 Lady Ruby Drive, East Tamaki, Manukau 2013 PO Box 58623 Botany, Manukau 2163 Ph: +649.274.2000 Fax: +649.274.2001 Email:
[email protected] @RackTech