®
RT Series Glasteel Reactors
In-line mixer drive
Handhole or manway including an integral fused sight glass and protection ring More top head nozzles Stainless steel insulation ring/drip shield
VMX Mixer Drive
Fine grain carbon steel for improved low temperature characteristics
Higher internal and jacket pressure rating
All legs designed for wind and seismic conditions
Superior concave baffle with TMI sensor
Superior corrosion resistance with Pfaudler Glasteel® interior.
Scalable or Cryo-lock® Impellers
Pfaudler RT Series VMX Drive
RT-Series reactors from 20 gallons to 500 gallons are equipped with Pfaudler’s VMX Mixer Drive. It provides a versatile, compact, clean package. The in-line design is composed of a C-faced motor suitable for inverter service, supported directly on the top of the gearbox. This design allows easier access to the process nozzles. Additional features are simple seal changeouts, low maintenance gearboxes, and plated (not painted) pedestal and gearbox components.
The new standard impeller for small-scale reactors (20 to 200 gallons) is the scalable Curved Blade Turbine (CBT), replacing the traditional Retreat Curve Impeller (RCI). Process scaleup and scale-down has been made easier and more accurate due to the geometric similarities between scalable impellers and Cryo-Lock® impellers. For the larger RT-Series reactors, the standard impeller is the Cryo-Lock Curved Blade Turbine.
Scalable Mixers
Concave Baffle
The new Concave Baffle provides 15% to 20% increased power investment over competitive offerings. It is provided with our TMI temperature sensor. The TMI is a spring-loaded temperature sensor, with no exposed tantalum and no gasketed joint.
Low Temperatures
Many processes today run at lower temperatures. All shells and heads of the RT Series utilize fine grain carbon steel which has significantly improved low temperature characteristics.
Since many chemical processes today require higher pressures, we have increased the internal pressure rating of our small reactors (5 to 100 gallons) to 150 psig. The jacket pressure rating for the small reactors is 125 psig. For our larger RT-Series reactors (200 to 500 gallons) the internal and jacket pressure ratings are 100 psig.
Higher Pressure Ratings
The RT-Series reactor can replace existing standard P-Series and E-Series reactors with minimal piping or support modifications. Additionally, the bottom outlet nozzle projection has been increased for easier access.
Easy Installation
Choose from a full line of Pfaudler RT-Series Glasteel reactors, with models ranging from 5 to 500 gallons. These configurations can be customized to meet specific design requirements.
Standard and Custom Designs
The specially formulated glass lining, fused to a steel substrate, is highly corrosion resistant and chemically inert to nearly all substances. It is the ideal environment for processing ultra-pure products.
Why Use a Glasteel® Reactor
Its smooth surface resists adherence by viscous or sticky materials and cleans easily. Glasteel is strong. Fusing glass to steel produces a composite material with the advantages of glass and strength of steel. It has a high resistance to impact and thermally induced stresses.
RT -1 410 RT -2 020 RT -2 030
RT -1 410 RT -2 020 RT -2 030
RT -1 410 RT -2 020 RT -2 030
RT-14-10 Series and RT-20-20/30 Series Capacity (gallons)
10
20
30
Heating Area (square feet)
Working
10
20
30
Jacket
3.6
6.7
9.3
Top Head
.6
1.9
1.9
Bottom Head
1.2
2.7
2.7
W/Drive, Agit, Baffle
780
1070
1160
.4
Add for Shipment
150
150
150
Bottom Head
1.6
4.5
4.5
Per Inch of S.S.
.7
1.4
1.4
To Bottom of Impeller
2.1
1.5
1.5
To Top of Impeller Blades
3.1
4.0
4.0
To Bottom of Baffle
1.7
4.9
4.9
To Face of Main Flange
10.2
23.2
31.4
Jacket
5.8
10.7
13.6
Per Inch of S.S.
Weight (pounds)
.3
.4
Dimensions
Design Pressure Internal @ 450˚F Jacket @ 450˚F
150/FV 150/FV 150/FV
A
16 1⁄2"
18 3⁄4"
24 3⁄4"
125/125 125/125 125/125
B
73 ⁄8"
91 ⁄16"
95 1⁄8"
5
90˚
90˚
60˚
(2) 2" Nozzles on 7" R
60˚ 120˚
45˚
2 3/8"
13
140˚ 150˚
30˚
165˚ 2 3/8"
0˚
180˚
0˚
180˚
(3) Support Bosses on 10 1/2" B.C.
4 3/8" handhole on 7" R 215˚
(3) 1 1/2" Nozzles on 5 5/8" R 240˚ 300˚
300˚
285˚
270˚
270˚
(2) 1 1/2" Nozzles on 7" R
2.5 DTW Drive VMX 150 Drive Lubricator
31" 43 1/2"
Lubricated or Dry Mechanical Seal Face of Drive Nozzle 4 7/8"
1/4" Gasket
4 1/8" Typ
Face of Drive Nozzle B
B Drip Shield (Stainless Steel)
A
Lubricated or Dry Mechanical Seal
20˚
14" ID
5 5/8"
4 3/4" (1 1/2" Noz)
1/4" Gasket
10 3/4" Typ
18" ID
Drip Shield (Stainless Steel)
Fin Baffle A
20" ID
Concave Baffle
24" ID
4 1/4"
Inside Vessel Head
2 1/2"
3" 2"
Face of 2" Nozzle
6 1/4" Span VBT 18"
18"
10 3/8" Typ
7 1/2" Typ
10 3/16" Typ
279 RPM Inside Vessel Head
3" Face of 2" Nozzle
5" (2" Noz)
2" 9 1/4" Span CBT
13 3/8" Typ
7 1/2" Typ
RT -2 450 RT -3 210 0
RT -2 450 RT -3 210 0
RT -2 450 RT -3 210 0
RT-24-50 Series and RT-32-100 Series Capacity (gallons)
50
100
Heating Area (square feet)
Working
50
100
Jacket
13.1
22.8
Weight (pounds)
Top Head
3.2
29.0
Bottom Head
4.1
7.3
W/Drive, Agit, Baffle
1380
2510
.7
Add for Shipment
150
150
Bottom Head
7.8
18.6
Per Inch of S.S.
.5
Per Inch of S.S.
2.0
3.5
To Bottom of Impeller
2.1
5.2
Design Pressure
To Top of Impeller Blades
7.1
16.8
Internal @ 450˚F
150/FV 150/FV
A
28 3⁄4"
36 1⁄4"
To Bottom of Baffle
8.5
15.5
Jacket @ 450˚F
125/125 125/125
B
100"
115 5⁄8"
To Face of Main Flange
52.4
116.9
Jacket
18.4
29.5
Dimensions
90°
(2) 1 1/ 2" Nozzles on 8 1/2" R
90˚ 45˚
45°
60° (4) 4" Nozzles on 11 1/4" R
140˚ 150˚
30˚
150°
165˚ 0˚
215˚
270˚
180°
3" Nozzle on 8 1/2" R
210°
2" Nozzle on 8 1/2" R
285˚
2 3/8"
0°
180˚ (3) Support Bosses on 10 1/2" B.C.
4 3/8" handhole on 7 1/2" R
165°
8"
2 3/8"
(3) Support Bosses on 10 1/2" B.C.
300° 270°
285°
VMX 150 Drive Lubricator
VMX 150 Drive
Lubricator
43 1/2"
43 1/2"
Lubricated or Dry Mechanical Seal 22 1/2°
Lubricated or Dry Mechanical Seal
20˚
Face of Drive Nozzle
Face of Drive Nozzle 6 1/2"
5 5/16"
1/4" Gasket
5 9/16"
(1 1/2" Noz)
(2" Noz)
6 1/8"
9 5/8"
14"
(3" Noz)
B
11 1/4"
13 1/2"
3/8" Gasket 7 1/2"
8 1/2" Typ
11" Typ
B
Drip Shield (Stainless Steel)
11 1/2" Typ
Drip Shield (Stainless Steel)
A
Concave Baffle
24" ID 28" ID
32" ID Vessel A
279 RPM 2 3/4"
Inside Vessel Head
36" ID Jkt Concave Baffle
279 RPM
3" Face of 2" Nozzle 18"
2" 11" Span CBT
3 3/4"
Inside Vessel Head 3 1/2" Face of 3" Nozzle
3" 8 3/4"
18"
15 7/16" Typ
7 1/2" Typ
14 1/2" Span CBT
14 1/2" Typ
14 1/2" Typ
RT -4 020 0 RT -4 830 0 RT -4 850 0
RT -4 020 0 RT -4 830 0 RT -4 850 0
RT -4 020 0 RT -4 830 0 RT -4 850 0
RT-40-200 Series and RT-48-300/500 Series Capacity (gallons)
200
300
500
Heating Area (square feet)
Working
200
300
500
Jacket
37.8
50.3
79.6
Top Head
56.7
92.0
92.0
Bottom Head
11.6
16.9
16.9
W/Drive, Agit, Baffle
3990
5070
6420
1.1
Add for Shipment
150
150
150
Bottom Head
36.3
62.7
62.7
Per Inch of S.S.
.9
Per Inch of S.S.
5.4
7.8
7.8
To Bottom of Impeller
10.4
19.6
19.6
Design Pressure
To Top of Impeller Blades
33.6
65.6
65.6
Internal @ 450˚F
To Bottom of Baffle
39.0
90.1
90.1
Jacket @ 450˚F
To Face of Main Flange
229.4
355.5
574.8
Jacket
45.4
54.9
81.0
72 1/2° 67 1/2°
Weight (pounds)
1.1
Dimensions 100/FV 100/FV 100/FV
A
45 1⁄2"
49 3⁄8"
77 3⁄8"
100/100 100/100 100/100
B
140 ⁄4"
147 ⁄2"
176 3⁄8"
3
90° 96° 60°
120°
1
90°
67 1/2°
135°
42°
153° 4 3/8"
4 3/8"
PFAUDLER
CERTIFIED BY
DANGER
0°
180°
0°
12" x 16"
180° 12" x 16"
205°
DANGER
CERTIFIED BY
PFAUDLER
310°
225°
240° 247 1/2°
287 1/2°
300°
270°
270°
247 1/2°
VMX 250 Drive
VMX 250 Drive
56 1/4"
56 1/4"
22 1/2° 23° Face of Drive Nozzle
Face of Drive Nozzle
17 1/8"
12 11/16" 3/8" Gasket
B
13" (6" Noz)
15 5/8" (4" Noz)
16 5/8" (6" Noz)
20"
15 3/4"
11" Typ Drip Shield (stainless steel)
14 1/2" (4" Noz) 30" A A
40" ID Vessel
18"
4 3/4" 3"
18 1/2" (4" Noz)
18 7/16" (8" Noz)
6" 3" 8 3/4"
18 1/2" 23" Typ
11 1/2" Typ (300 Gal.) 32 1/2" (500 Gal.) 60 1/2"
48" ID Vessel
Inside Vessel Head 3 1/2" Face of 3" Nozzle 18"
8 3/4"
18" TYP
(300 Gal.) 109 RPM (500 Gal.) 146 RPM
52" ID Jacket
44" ID JKT
Inside Vessel Head 3 1/2" Face of 3" Nozzle
16 3/4" (4" Noz)
3/8" Gasket
B
125 RPM
16" (8" Noz)
23 1/2"
SB81-400-2
Pfaudler-Balfour Ltd. Leven, Scotland
Pfaudler, Inc. Rochester, New York
Chemical Reactor Services, Ltd. Bolton, England
Glasteel® Parts and Services Rochester, New York
Pfaudler-Werke GmbH Schwetzingen, Germany Pfaudler S.A. de C.V. Mexico City, Mexico GMM Pfaudler Karamsad, India
Pfaudler Equipamentos Industriais Ltda. Taubate, SP, Brazil
The information contained in this bulletin is believed to be reliable general guidelines for consideration of the products and services described herein. The information is general in nature and should not be considered applicable to any specific process or application. Pfaudler, Inc. expressly disclaims in connection with the information contained herein any warranty, express, implied or statutory, including the warranty of fitness for a particular purpose and merchantability.
10/03 1M Mech No. 674
Suzhou Pfaudler Glass-Lined Equipment Company Ltd. Suzhou, China
US Facilities Pfaudler, Inc. Rochester, New York Tel: (1 585) 235-1000 Fax: (1585) 235-6393 Glasteel® Parts and Services Rochester, New York Tel: (1 585) 235-1010 Fax: (1 585) 235-7923 Worldwide Facilities Chemical Reactor Services Ltd. Bolton, England Tel: (44 1204) 862-777 Fax: (44 1204) 577-484 GMM Pfaudler Bombay, India Tel: (9122) 2047470 Fax: (9122) 2049408
Pfaudler-Balfour Ltd. Leven, Fife, Scotland Tel: (44 1333) 423-020 Fax: (44 1333) 427-432 Pfaudler Equipamentos Industriais Ltda. Taubate, SP, Brazil Tel: (55 122) 326-244 Fax: (55 122) 217-562
1000 West Avenue PO Box 23600 Rochester, NY 14692-3600 Tel: 585 235 1000 Fax: 585 235 6393 www.pfaudler.com
Pfaudler S.A. de C.V. Mexico City, Mexico Tel: (52 5) 55 355 0100 Fax: (52 5) 55 355 0809
Copyright © Pfaudler, Inc. 2003 A Unit of Robbins & Myers, Inc. All rights reserved
Pfaudler-Werke GmbH Schwetzingen, Germany Tel: (49 620) 2850 Fax: (49 620) 222412
Glasteel® and Cry0Lock® are registered trademarks of Pfaudler, Inc.
Suzhou Pfaudler Glass-Lined Equipment Company Ltd. Suzhou, China Tel: (86 512) 534 1622 Fax: (86 512) 534 0870