PlasTEAK
®
PlasDECK 2015
®
CUSTOM BUILT SWIM PLATFORMS We build all custom swim platforms that are constructed from boards that are made of recycled plastic. Platform colors can be alternated at no additional charge. The price for platforms is the same for straight, curved, or add-on. Price is based on square inch measurement. Custom tube brackets are additional. A bracket is required every 2 feet of platform. CUSTOM PLATFORM PRICE: 40 CENTS A SQUARE INCH
• UV Stabilized • Solid plastic lumber • Recycled plastic • Will not splinter, chip, warp or rot • Will not absorb water, paint, stain or oils • Resistant to gas, solvents, insects & bird stains
(Length in inches)
X
ADD-ON PLATFORMS Sometimes the boat manufacturer’s platform just is not enough. Give us a call to discuss integrating with your current platform. No additional cost for custom accommodations. PRICE: .40 cents per sq. inch.
x .40 = PRICE (Width in inches)
HALF PLATFORMS The Half Platforms are 16” x 18” and can accommodate
either an inboard or outboard engine. Please specify your requirement when ordering. Ladders are optional & not included.
TEAK, OFF-WHITE, BLACK, & WHITE
PRICE: $155.00 Straight Platform Curved Platform ADD LADDER $135!
CUSTOM BOW PULPITS Close up of embedded stainless steel angle
Our Bow Pulpits are custom built in our shop from UV stabilized recycled plastic lumber. They can be custom built to any specifications required for your boat & are extremely durable with embedded stainless steel for reinforced strength. Each features a bottom anchor roller or can be built to accommodate surface rollers. Winches, spot lights, double anchors, etc. are optional additions. COLORS: Teak, White, Off-White, & Black. STRIPE COLOR: Teak, White or Black.
CUSTOM STAINLESS STEEL BRACKETS 304 SS Price= $70.00 each 316 SS Price= $90.00 each Rated at 500 lbs. each (227 kg) Our custom tube bracket is made of 7/8” (22mm) stainless steel tubing and is sized to fit your boat. This bracket works well on many boats with limited transom depth. All mounting hardware is included. A bracket is needed every 2 feet. Now available in 304 & 316 stainless. 316 recommended for salt water installations.
2
PRICE: $150.00 per lineal foot
WINDLASSES Lewmar v700 Vertical low profile For boats up to 35’
$750
www.PlasTEAK.com 1-800-320-1841 www.PlasDECK.com
Lewmar 1000H Horizontal Top mount For boats up to 45’
$900 1-800-320-1841
3
PLATFORM LADDERS
ABOVE PLATFORM LADDERS
$85
SEA RAY HATCHES
Ladders are all stainless steel and telescope up inside. Go to our website to see more info and specifications for our ladders. Above platform ladders fold up and lay on top of platform.
$105
2 Step Above
3 Step Above
$170
$135
This Bow Insert offers beauty and protection. Anchor rollers and windlasses can also be added to further enhance the functionality of your pulpit. We have patterns for both 34FT and 39FT Sea Ray Bow Inserts. Pulpit colors are: Teak. Stripes can be: White or Black
4 Step Above
Our durable custom hatches are UV stabilized. Sea Ray Bow Hatches include stainless hardware and weather stripping.
TOPSIDE
2 Step Under $245
PRICE: $200.00
PRICE: $195.00
UNDER PLATFORM LADDERS These ladders telescope up and secure up underneath and out of the way
2 Step Under $150
SEA RAY BOW INSERTS
3 Step Under $300
4 Step Under
Underside with Weatherstripping
BEFORE & AFTER Other Sea Ray pulpit options
INSERTS FOR SEA RAY BOATS Features Rubber Strap
Self Locking Clasp
CUSTOM BOAT WORK All custom pricing
Features Button Release
Features Self Locking
Replace your existing teak trim with our no-maintenance product or add new trim to enhance the beauty of your boat. Send your original pieces to be used as templates or we’ll work with you to create new trim.
Sea Ray Boats under 26’ $75.00 Sea Ray Boats 27’ - 30’ $95.00 Sea Ray Boats 34’ $115.00 Sea Ray Boats 39’ $115.00
$150.00 a pair $190.00 a pair $230.00 a pair $230.00 a pair
Before & After
Sea Ray Step Pads
Sea Ray Boats under 26’
0 Steps 1 Step 2 Steps 3 Steps
We offer replacement inserts for Sea Ray swim platforms. Inserts can be made in any of our platform colors as an option, but teak is in stock. Each insert, except the 26’, comes with replacement step pads for the swim ladder.
Before & After
Sea Ray 27’ - 30’
Sea Ray Boats 34’ & 39’
More examples of our custom boat trim are available on our website! Eyebrows, Gunwales, Step Pads, Ladder Treads, Traction Strips, Toe Rails, Companionway Boards, Hatch Slides, Window Ports, and so much more!
CUSTOM HANDRAILS
Let us fabricate your new handrails. Yours can be beautiful ALL of the time without the work. The next time you have them off, send them in for duplication and be done with maintaining them. Handrails can also be made to customer specifications. 7/8” Wide Handrail 1 3/8” Wide Handrail
$12.00 per foot = $1.00 per inch $18.00 per foot = $1.50 per inch
$1 per! inch
7/8” Wide Handrails (before & after)
4
www.PlasTEAK.com 1-800-320-1841 www.PlasDECK.com
1-800-320-1841
5
Teak & holly Interior Vinyl Flooring Our Teak & Holly interior marine flooring is the perfect carpet replacement. The soft texture provides good footing while the honey glow adds an elegant classic look. The rugged vinyl is waterproof and durable.The Teak & Holly is a vinyl flooring sheet and the surface has a lightly embossed grain. The sheets are 6’ wide and they are cut to even foot lengths. The lines in the flooring run the length of the roll and its 2 mm thick. 6 ft. wide roll only = $50.00 / lineal foot
Vinyl Flooring accessories
Roller
Lineal foot = 6’ wide by 1 ft long
$8.33 sq. ft.
$60
$90
$20
Trowel
$50 per lineal foot Gallon
$38
Epoxy
Quart
Vinyl Adhesive
Vinyl Adhesive
(approx. 200 sq feet)
Vinyl Adhesive
$5
(approx. 110 sq feet)
(approx. 50 sq feet)
Floor Padding
$24.00 / lin. ft. (71 inches wide) Teak & Holly Matte
Teak & Holly Satin
PlasTEAK Floor Padding is used as an optional padding underlayment for our vinyl flooring and it helps give your floor a smooth appearance if you have minor irregularities. Also has sound deadening qualities. It is 3/16” (5mm) thick and available in 6 ft (1.8m) widths. It is cut and sold in even lineal foot lengths. $24 per lineal foot.
Teak & Holly Glossy
New L Trim Wild Cherry
Rosewood
$15 each
Teak Timber
L Trim is a flexible plastic that comes 6 foot long. New Longer size accomodates installs using padding or large substrates. Each trim is pre drilled every 5 inches.
3/8”
7/8” Maple &Teak
Teak & Onyx
1”
Plastic trim installed to cover plywood and miter cut.
Walnut & Holly
Plastic trim can bend to make curves
3/8” 3/4”
Teak
Chestnut
Cherry
Holly
Aluminum
13/16”
*Please note aluminum size is different.
New T Trim Teak & Holly Matte with original trim work
Before & After Hatches without Trim
Wild Cherry with Cherry Trim
$18 each
3/4” 1/2”
1/4”
T Trim is a flexible plastic vinyl floor trim that comes 6 foot long. Designed to trim hatches. Each trim is pre drilled every 5 inches. Available in the 4 colors listed above.
1”
6
www.PlasTEAK.com 1-800-320-1841 www.PlasDECK.com
1-800-320-1841
7
RECYCLED OUTDOOR FURNITURE
CUSTOM SIGNS Picnic Tables
Recycled plastic picnic tables in various colors and different sizes.
PlasTEAK can fabricate recycled plastic signs to your specifications and can include logos, special lettering, epoxy-filled lettering, outlining and more. We carry multi-layer sign stock that has matching outside layers and contrasting centers. The picture on the left shows the multi-layer sheet (blue-white-blue). Additional colors can be added by using our epoxy filler as shown in the Eagle sign.
Call for pricing
COLORS
6 ft $675 8 ft $825
Hexagon Tables
PLASTIC GRATES
We have several different selections of hex tables including ADA accessible made of recycled plastic.
$615 $575
Available in Tan, Gray and White 12” wide x 36” long x 1.2” thick 12” wide x 48” long x 1.2” thick 12” wide x 60” long x 1.2” thick
Standard Benches
6 ft $440
8 ft $560
2X2
1.5” X 1.5”
Custom Engraved Benches
2X4
Visit our website to custom design your bench today. Advertising, celebrations or memorials, no matter the reason, we have the options. Routered or epoxy lettering.
1.5” X 3.5”
2X6
1.5” X 5.5”
4X4
$3.50 / letter $4.50 / letter
BASIC COLORS
8 ft Lengths Basic
Premium
10 ft Lengths Basic
Premium
12 ft Lengths Basic
Premium
$16.00 $18.90 8 lbs
$19.15 $23.15 10 lbs
$27.15 $31.40 12 lbs
$30.65 $36.75 18 lbs
$38.60 $45.80 22 lbs
$45.25 $55.40 26 lbs
$45.25 $55.40 28 lbs
$56.45 $67.90 35 lbs
$67.90 $81.45 42 lbs
$60.95 $73.50 38 lbs
$75.60 $90.80 48 lbs
$90.55 $108.35 58 lbs
BLACK
YELLOW
CHARCOAL
WHITE
GREY
SAND WEATHERED BROWN WOOD GREEN
CEDAR
ROSEWOOD
3.5” X 3.5”
6X6
Optional Arm Rest Our arm rests are made of durable 1/4 in x 2in powder-coated steel with recycled plastic lumber pads that match the bench material. Overall size of an armrest is 9 1/4 in high, 16 in deep, and 3 1/2 in wide.
8
$30.00 $40.00 $50.00
These boards are molded rather than extruded. Because of this, the surface has a coarser texture. The interior is not solid and so exposing the cut side is not recommended. There are two prices for each size. The first price is for Black or Charcoal. The other is the premium colors - Yellow, White, Grey, Sand, Weathered Wood, Brown, Blue, Green, Cedar, Rosewood. Are priced slightly higher and MAY take longer to process because they are special ordered.
SIZES
Routered Epoxy
5 lbs 6 lbs 8 lbs
MOLDED LUMBER
Modern design & heavy-duty this commercial grade bench is maintenance-free & made from recycled plastic lumber.
4 ft $325
Detailed Epoxy work
Grates are designed and engineered to be the finished decking surface for docks, decks, walkways and virtually any indoor or outdoor structure.
PREMIUM COLORS
6 ft Hex 6 ft ADA
Custom direction signs
Custom Posts
Multi layered Routered Sign
$25 each
5.5” X 5.5”
8 ft Lengths ONLY
$159.20 $191.15 84 lbs
www.PlasTEAK.com 1-800-320-1841 www.PlasDECK.com
1-800-320-1841
9
TRIM LUMBER
This lumber is solid recycled plastic that is UV stabilized all the way through. It has the smoothest texture, the most eye-appealing color, and is about twice as flexible as wood lumber. Standard colors are White, Black, Gray, and Teak.
SIZE
ACTUAL
Did you know?
This is what we make our custom marine products out of!
WEIGHT
PRICE
1” x 6” T&G x 12’
.75” x 5.5” T&G x 12’
14 LBS
1” x 10” x 12’
.75” x 9.5” x 12’
21 LBS
$11.00 $16.00 $52.00 $23.00 $26.00 $29.00 $48.00 $55.00 $52.00 $71.00
2” x 2” x 12’
1.5” x 1.5” x 12’
8 LBS
$26.00
2” x 4” x 12’
1.5” x 3.5” x 12’
18 LBS
$54.00
2” x 4” RND x 12’
1.4” x 3.5” RND x 12’
15 LBS
$52.00
2” x 6” x 12’
1.5” x 5.5” x 12’
29 LBS
$95.00
2” x 8” x 12’
1.5” x 7.5” x 12’
39 LBS
$121.00
2“ x 10” x 12’
1.5“ x 9.5” x 12’
43 LBS
1/2” x 1 1/2” x 12’ 1/2” x 2 1/2” x 12’ 1/2” x 9 1/2” x 12’
1/2” x 1 1/2” x 12’ 1/2” x 2 1/2” x 12’ 1/2” x 9 1/2” x 12’
7/8” x 2 1/8” x 12’
7/8” x 2 1/8” x 12’
3 LBS 4 LBS 17 LBS 6.5 LBS
7/8” x 2 7/8” x 12’
7/8” x 2 7/8” x 12’
9 LBS
1” x 4” x 12’
.75” x 3.5” x 12’
9 LBS
1” x 6” x 12’
.75” x 5.5” x 12’
14 LBS
1” x 5.5” x 12’
14 LBS
1” x 6” x 12’
Teak color only!
$143.00
PARKING BLOCKS & SPEED BUMPS
Our solid no-maintenance speed bumps are made of durable recycled plastic and have a limited lifetime warranty. Easy Installation Maintenance Free Light Weight – Yet Stable Lifetime Limited Warranty Chemical & Weather Resistant Includes Installation Hardware Great for Wall or Equipment Protection
Parking Blocks
Compact 6’ Block Deluxe 4’ Block Deluxe 6’ Block Standard 4’ Block Standard 6’ Block 8’ Truck Block 20” Wheel Chock
28 lbs 26 lbs 39 lbs 22 lbs 33 lbs 104 lbs 20 lbs
3.5” x 3.5“ x 12’
43 LBS
$129.00
BOATBOARD SHEETS
These plastic sheets have superior UV stabilization and will not delaminate. Very durable finish that can be easily cleaned and not rot. Actual sheet measurement is 4 1/2’ x 8’. Full sheet pricing. This is often used for exposed finished cabinets, doors, paneling, & hatches. Other great uses are rod holders, racks, and custom cup holders. Sheets have solid color throughout. Available in 4 colors: White, Off-White, Gray, and Black. Item 1/4” Thick Boatboard 1/2” Thick Boatboard 5/8” Thick Boatboard 3/4” Thick Boatboard 1” Thick Boatboard
10
Item Number R-BB05614 R-BB05612 R-BB05658 R-BB05634 R-BB05601
Weight 45 lbs 90 lbs 113 lbs 135 lbs 180 lbs
Actual Dimensions Metric 4 ½’ x 8’ x 1/4” (1.4m x 2.4m x 6.35mm) 4 ½’ x 8’ x 1/2” (1.4m x 2.4m x 12.7mm) 4 ½’ x 8’ x 5/8” (1.4m x 2.4m x 15.88mm) 4 ½’ x 8’ x 3/4” (1.4m x 2.4m x 19mm) 4 ½’ x 8’ x 1” (1.4m x 2.4m x 25.4mm)
Concrete Lag and Anchor: For concrete lag screws, a sleeve is used. A hole is drilled into the concrete and the sleeve is driven in. Then the lag is screwed down through the bump to secure.
$62.05 $68.75 $82.35 $58.40 $71.55 $252.25 $215.60
Channeled Parking Blocks Compact 6’ Block Standard 4’ Block Standard 6’ Block 8’ Truck Block
20 lbs 22 lbs 33 lbs 104 lbs
$58.15 $54.50 $67.00 $234.50
Compact
Standard
Standard Colors: Gray, Yellow and Blue Deluxe 4’ Bump Deluxe 6’ Bump Standard 4’ Bump Standard 6’ Bump Standard 9’ Bump
30 lbs 45 lbs 23 lbs 29 lbs 55 lbs
Channeled Speed Bumps Price $139.00 $277.00 $352.00 $416.00 $510.00
Asphalt Spike: 12 inch spikes are used for asphalt. Pre-drill a 3/8 inch hole for the spike.
Standard Colors: Gray, Yellow and Blue (NOTE: Wheel Chock is YELLOW only.)
Speed Bumps 4” x 4“ x 12’
When ordering be sure to specify between Lag bolts for concrete or Spikes for asphalt:
Standard 4’ Bump Standard 6’ Bump Standard 8’ Bump Standard 10’ Bump Standard 12’ Bump
14 lbs 23 lbs 31 lbs 43 lbs 52 lbs
$85.95 $130.50 $82.70 $120.00 $170.00 $81.75 $108.00 $163.55 $204.50 $245.40
Standard
Available in YELLOW only.
www.PlasTEAK.com 1-800-320-1841 www.PlasDECK.com
1-800-320-1841
11
The ONLY synthetic teak decking that’s MADE IN THE US!
3 easy ways to update your boat Buy the Shiplap Series and DIY install 2 Send templates & we’ll custom design your mats 3 Find an installer & set up an appointment today!
U.S. Patents: 7,578,251 & 7,617,791
1
The look and feel of real teak with low maintenance! PlasDECK is a patented synthetic teak that was created for the marine industry. Made out of postindustrial recycled flexible PVC, this material is easy to work with and maintain. This material is the perfect option to upgrade your boat and replace the dingy carpet. PlasDECK will hold up to the sun and marine environment for years while you enjoy more of your free time. PlasDECK uses a proprietary formula which ensures that our material will not dry, crumble or release from the adhesive like others have been prone to do.
Choose from the following 3 styles:
A
PlasDECK has grown to be consumer friendly over the years. We listened when you said the material is hot and we designed our CoolTEAK Series. We understood when you didn’t want to be traditional and wanted more unique colors. Today we have up to 17 colors and the options are endless from there.
New York Pattern
Deck has NO borders around edges
B
Hybrid Pattern
Borders on front edges of areas
C
Traditional Pattern
Borders around all edges & hatches
Choose your style, color and get started today!
The most common way of getting our material on your boat is to send in templates of the areas you want finished. From there we will create custom mats just for you. If you prefer to do things yourself, you can choose between 2 colors in our Traditional Series for your own design.
Create & send us your template
We digitize the template & design your decking
Next we use a CNC & cut precise custom mats
Then we ship it ready to glue down
Won’t rot, crack or fade - Excellent adhesion - Resists stains - Nearly no maintenance - Easier to clean Highest UV protection - Very resilient - Anti-fungal - Non-slip - Environmentally-friendly - Costs less than teak
12
www.PlasTEAK.com
1-800-320-1841
www.PlasDECK.com
1-800-320-1841
13
Traditional Series DIY or CUSTOM
Teak with Black Lines
Teak with White Lines
Coolteak series is only avaliable in custom made mats
14
Metallic Series
Classic synthetic teak decking at its finest. Looks real without the maintenance.
DIY or CUSTOM
CoolTEAK Series
CoolTEAK with Teak Lines
The only thing that’s traditional about this decking series is the color. Natural & Mahogany colors are only available in custom made mats.
CoolTEAK with Black Lines
Natural with Black Lines
Natural with White Lines
Natural with Blue Lines
CoolTEAK is the original synthetic decking that’s designed to stay 25°F to 30°F cooler than any other PVC decking material available.
Ash with Blue Lines
Ash with Gray Lines
Ash with Black Lines
Mahogany with Black Lines
Mahogany with White Lines
Aged Series
Silver with Black Lines
This series has a bold new look that compliments contemporary boat designs or adds new flair to older boats.
Silver with White Lines
Silver with Blue Lines
This series has a variety of aged decking colors to match the colors of already faded teak on your boat.
Aged series is only avaliable in custom made mats
Aged Teak with Black Lines
Aged Teak with White Lines
www.PlasTEAK.com 1-800-320-1841 www.PlasDECK.com
Slate Gray with Black Lines
1-800-320-1841
15
Azure is the latest & greatest of marine decking on the market. This material charges during the day and the lines glow during the night. This product received the International Boat Exhibitors Innovation Award for Safety.
PlasDECK Tools Of The Trade...
The Azure is only avaliable in custom fabricated mats.
PlasDECK Glue
Price: $18.00 Caulk Glue
Price: $15.00 Glue Gun
Price: $60.00 Floor Roller
Price: $38.00 CUSTOM INLAYS including images, logos, & lettering. Contact us today to see what we can create for you!
Cutting Shears
Price: $38.00 45 Gun Tip
Price: $5.00 Template Material
Price: $75.00 Curved Blades
Price: $5.00 Hooked Blades
Price: $5.00 Spatula Knife
Price: $42.90 Surform Grater
Price: $7.50 Trowel
Price: $5.00 Spreader
Price: $3.00
16
www.PlasTEAK.com 1-800-320-1841 www.PlasDECK.com
Floor Glue comes in 20 oz.sausages and can be used with the Sausage Gun or slit and squeezed out for smaller areas. Covers 12 to 15 sq. ft. each Used to create caulk lines & edges. Same as floor glue just in caulk tube.
To dispense the 20 oz. Sausage glues. Used to squeeze air pockets out and make sure all flooring is adequately adhered. Features 2 handles for maximum leverage. Used to quickly and effortlessly to cut the PlasDECK to length and/or angles during installation. Great for gluing in hard to reach places. Use this clear plastic to make templates. It comes in a 52” x 50’ roll and it’s .007 mil thick. 5 pack of hard to find curved blades. Great to cut curves and intricate pieces. 5 pack of hooked blades. Perfect to cut curves and intricate pieces. This is the knife the Pros use! The flexible, wide, rounded edge is perfect for trimming dry caulk without damaging your deck. This is a quick and easy way to shape and round edges of PlasDECK. Two sizes of teeth, 1/16” and 1/32”. The larger size spreads PlasDECK glue, the smaller is for our vinyl flooring glue. Used to spread glue in hard to reach places. Three sizes of teeth, 1/8”, 3/16” and 1/4”.
1-800-320-1841
17
PlasDECK DIY SERIES
PlasDECK’s patented joining edge is designed so that the edges fit together seamlessly. The strips of decking are hand cut and dry fit before gluing to substrate. Spread adhesive, lay the pre-cut decking back down, pushing the edges together as you go. With our edging pieces even elaborate designs can be achieved by the Do-It-Yourselfer.
PlasDECK’s patented embossed Ship-lap decking material was designed for custom DIY installations for any boater. Custom design and upgrade your own boat today. Visit our website to see video and installation instructions.
Check out our website for additional DIY resources.
E-523 $280 This roll is 6 inches wide and 32 foot long. Each teak &black plank has a shiplap edge that over laps the next plank to form panels on your deck. 6” x 32’ = 16 square feet Weighs 22 lbs About 1 lb per sq. ft.
E-522 $280 This roll is 6 inches wide and 32 foot long. Each teak & white plank has a shiplap edge that over laps the next plank to form panels on your deck. 6” x 32’ = 16 square feet Weighs 22 lbs About 1 lb per sq. ft.
E-521 $100 This roll is 2 inches wide and 32 foot long. Each teak & black plank has a shiplap edge that over laps the next plank to form panels on your deck. 2” x 32’ = 5.3 square feet Weighs 7 lbs About 1 lb per sq. ft.
For Margin Boards E-600
For use in detailed margin designs or to create a King Plank.
6” x 8’ Blank Roll 5.5 lbs Price: $70.00
E-606
3” x 8’ Border 3.5 lbs Price: $45.00
Use E-606 for all margins. Use around edges, bordering around hatches & more.
For Stairs & Edges E-604
3” x 8’ Border Weighs 4 lbs Price: $55.00
E-604 is our bullnose for edging of stairs.
E-604-AZ
3” x 8’ Border Weighs 4 lbs Price: $65.00
E-604 is our Glow-in-the-dark bullnose for edging of stairs.
E-520 $100 This roll is 2 inches wide and 32 foot long. Each teak and white plank has a shiplap edge that over laps the next plank to form panels on your deck. 2” x 32’ = 5.3 square feet Weighs 7 lbs About 1 lb per sq. ft.
18
www.PlasTEAK.com 1-800-320-1841 www.PlasDECK.com
1-800-320-1841
19
PlasTEAK & PlasDECK P.O. Box 4290 3489 Sawmill Rd. Akron, OH 44321 www.PlasTEAK.com www.PlasDECK.com
1.800.320.1841
©
Copyright 2015 PlasTEAK & PlasDECK Inc. ALL LOGOS & TRADEMARKS ARE PROPERTY OF THEIR RESPECTIVE OWNERS.
We reserve the right to modify or discontinue any design, price, color or product without prior notification.
