LED
Recessed
Lighting Energy saving RECESSED LED Lighting for new construction, retrofit and remodel
About LED WHAT WHY
is LED
•
USE LED
•
A light-emitting diode (LED) is a semiconductor device that emits visible light when an electric current passes through it. It's sometimes also called a solid state device.
Exceptionally long life More than 25x longer than incandescent and 5x longer than CFL • Energy efficiency The future of lighting is higher-efficiency products with lower energy consumption levels • Meets California Title 22 requirements Unlike fluorescent lamps, LEDs contain no mercury •
Progress LEDs Emit no UV Decreases fading of fabrics and other materials
LEDs run cooler than incandescent or fluorescent light sources This significantly lowers the impact on the HVAC load of a building •
•
LEDs operate efficiently at cool temperatures Unlike fluorescents, Progress LED products operate down to -40°C.
LED: Saves $ on Energy Costs •
One Progress 6" LED recessed operating for 50,000 hrs uses $66 of energy.
•
One 6" incandescent recessed with a 65W lamp operating for 50,000 hrs uses $358 of energy.
•
Progress 6" LED saves $292 compared to an incandescent after 50,000 hrs of operation.
$358 incandescent energy cost
$66 LED energy cost
Incandescent
LED
(Savings after 50,000 hours of operation at 0.11/kwh) Cost for 50,000 hours of operation at 0.11/kwh
LED: Recessed Lighting Facts Recessed downlights are among the most popular lighting fixtures for new and remodeled homes. As the facts below illustrate, the use of LED recessed fixtures would create tremendous savings on energy and maintenance costs in both new and remodel applications.
35
residential
new homes have more than 20 recessed downlights.
• Typical
30
estimated 350 million recessed downlights are currently installed in U.S. homes. An estimated 20 million are sold each year. Source: Pacific Northwest
• An
25
National Laboratory (PNNL).
20
LED: Greater Life 15
• LEDs
last 50,000 hours at 70% lumen maintenance under normal usage. (Over 70% of the initial light output is maintained at 50,000 hours.)
commercial
10 residential
• LEDs
will continue to operate well past 50,000 hours, but will gradually dim over time. typical fluorescent lasts from 6,000 to 12,000 hours, and an incandescent only 800 to 2,000 hours.
1.4 yrs commercial 0.46 yrs
(Usage per day: residential - 4 hrs, commercial - 12 hrs)
Incandescent
Fluorescent
LED
published 2,000 hour life
published 12,000 hour life
50,000 hour life
residential
commercial
8.2 yrs
2.7 yrs
34 yrs
11.4 yrs
Years of life
• A
5
progresslighting.com | 1
State-of-the-Art Technology WHY Progress LED Recessed High Lumen Output
The P8071 6" trim has lumen output and distribution comparable to a 65W BR30 incandescent lamp.
Long Life
Anticipated life is 50,000 hours. This is based on 70% lumen maintenance. An average incandescent has a life of 800-2,000 hours and the average CFL 6,000-12,000 hours.
Warm White Color
Significant increases in efficacy and warm white color consistency. Available in both warm white 2700K (incandescent) and 3500K (halogen) color temperatures.
Color Temperature Color temperature is measured in degrees Kelvin and describes the visual warmth or coolness of light. Numerically high color temperatures have visually cool (blue) appearance and vice versa. 7000
Uniform overcast sky Daylight fluorescent
6000
Clear mercury Clear metal halide
5000
5000k fluorescent Avg. noon sunlight Coated metal halide
4500 Coated mercury Cool white fluorescent 4100k fluorescent 4000
3500
Sunlight 1 hr after sunrise 3500k Progress LED/3500k fluorescent White fluorescent Tungsten halogen
3000
Warm white fluorescent 3000k fluorescent Standard incandescent
2500
2000
Degrees Kelvin
2700k Progress LED/2700k fluorescent
High pressure sodium Sunlight at sunrise Candle flame
2 | progresslighting.com
Superior Dimming
Dimmable to 20 percent of full output on 3-wire low voltage electronic dimmer switches. Most self-ballasted CFLS are not dimmable at all.
Aesthetic Appeal
Acrylic lens diffuses the diode light source to effectively create a single visible source. Regressed reflector and minimal optical aperture create significantly reduced glare, resulting in improved quality of light.
New Construction, Remodel and Retrofit
Options for New Construction, Remodel and Retrofit
Intended for use in both new construction and remodel applications. Easy installation and UL classification for use with Progress and competitors recessed cans make Progress LED trims ideal for retrofitting.
Quick-Link Solutions for Title 24 Applications
Quick-Link (QL) trims comply with California Title 24 requirements for providing a plug-in power connector in place of a screw shell socket. Progress LED Quick-Link trims are designed to comply with building codes, including California Title 24, where use of screw shell sockets is restricted. Quick-Link trims are compatible with correlated Quick-Link housings from Progress Lighting.
Compatible with Competitive Progress LED standard trims are UL classified for use with many competitive recessed cans, including models from Capri, Commercial Electric, Emerald, Recessed Housings Elco, Halo, Intense, Jimway, Juno, Luminaire, LumaPro, Lithonia, Nora, Sea Gull, and WAC. See pages 4 and 5 for a list of specific models.
LED Recessed Trim Anatomy Screw shell socket adapter
Class II LED Driver 120V input, 50/60 hz Circuit board with 9 high brightness LEDs
Upper and lower die cast heat sinks Friction spring
Integral flange High transmissive diffuser
High efficiency, low glare die cast reflector
progresslighting.com | 3
6" and 4" LED Trims Introducing P8071 6" & P8026 4" LED Trims Single Solution Trims These LED trims are ideal for both new and remodel residential and light commercial construction Easy installation with (3) friction spring clips. Universal screw shell lamp adapter Compatible with many competitive recessed housings. (See chart below.) High Lumen output P8071 6" trims are comparable to a 65w BR30 incandescent lamp. P8026 4" trims are comparable to a 50w R20 incandescent lamp.
Superior dimming capabilities When used with 3-wire low voltage electronic dimmers, these trims feature gradual dimming to 20% of full light output through the dimmer's full range. Aesthetic Appeal Acrylic lens diffuses LEDs, effectively creating a single visible source. Regressed reflector and minimal optical aperture create significantly reduced glare resulting in improved quality of light.
P8071 6" LED Trims: IC/Non-IC, New Construction & Remodel
P8071-20 Antique Bronze, 2700K color temp P8071-20/35K Antique Bronze, 3500K color temp
P8071-121 Metallic Silver, 2700K color temp P8071-121/35K Metallic Silver, 3500K color temp
6" P8071-28 & P8071-28/35K Housing Compatability Matrix • • • • • • • • • • • • • •
FEATURES 9 LED (Light Emitting Diode) lamps included 12-watt input power Lumen output: 584 lumens (3500K), 502 lumens (2700K) Lumen output and distribution comparable to a 65w BR30 incandescent lamp CRI is 73 50,000 hours life based on 70% lumen maintenance Lamp contains no mercury, meets California Title 22 requirements Dimmable using most 3-wire low voltage electronic dimmers Die cast heat sink to maximize life expectancy and lumen output Optically controlled LED beam spread Excellent glare control and optical cutoff Frosted acrylic lens controls direct glare cULus listed for wet locations See chart for housing compatibility
Partial list of Progress and competitor housings compatible with 6" Progress LED trims P8071-28 White, 2700K color temp P8071-28/35K White, 3500K color temp
P8071-31 Black, 2700K color temp P8071-31/35K Black, 3500K color temp
P8071-36 Chestnut, 2700K color temp P8071-36/35K Chestnut, 3500K color temp 12W 6" recessed LED trim Smooth lensed trim with integral flange Output: 502 lm (2700K), 584 lm (3500K) UL/CUL classified for wet locations Dimensions: 5" ht., 7-3/4" overall dia.
4 | progresslighting.com
Manufacturer
Part Number
Capri
CR1, CRR1
Commercial Electric
C71CA(H3)
Elco
EL7RICA, EL7ICA
EL7ICAT
Emerald
P1-ICTN
Halo
H7ICAT, H7RICAT
Intense
I6AIC, I6RAIC
Jimway
C7ICR(H2)
Juno
IC22
Lithonia
L7X
LumaPro
5TP95
Luminaire
LUICT-00
Nora
NHIC-17QAT
NHRIC-17QNBAT
Progress
P187-TG, P87-AT
P816-TG, P86-TG
P821-FB
Sea Gull
1128
WAC
R6VI-ICA,
R6VI-R-ICA
State-of-the-Art Technology for New Construction & Remodel P8026 4" LED Trims: IC/Non-IC, New Construction & Remodel
P8026-20 Antique Bronze, 2700K color temp P8026-20/35K Antique Bronze, 3500K color temp
• • • • • • • • • • • • • •
FEATURES 9 LED (Light Emitting Diode) lamps included 11-watt input power Lumen output: 517 lumens (3500K), 434 lumens (2700K) Lumen output and distribution comparable to 50w R20 CRI is 75+ 50,000 hours life based on 70% lumen maintenance Lamp contains no mercury, meets California Title 22 requirements Dimmable using most 3-wire low voltage electronic dimmers Die cast heat sink to maximize life expectancy and lumen output Optically controlled LED beam spread Excellent glare control and optical cutoff Frosted acrylic lens controls direct glare cULus listed for wet locations See chart for housing compatibility
P8026-28 White, 2700K color temp P8026-28/35K White, 3500K color temp
P8026-36 Chestnut, 2700K color temp P8026-36/35K Chestnut, 3500K color temp
P8026-121 Metallic Silver, 2700K color temp P8026-121/35K Metallic Silver, 3500K color temp
4" P8026-28 & P8026-28/35K Housing Compatability Matrix Partial list of Progress and competitor housings compatible with 4" Progress LED trims P8026-31 Black, 2700K color temp P8026-31/35K Black, 3500K color temp
Manufacturer
Part Number
Capri
RR4
11W 4" recessed LED retrofit trim Smooth lensed trim with integral flange Output: 434 lm (2700K), 517 lm (3500K) UL/CUL classified for wet locations Dimensions: 4" ht., 5" overall dia.
TRR4
DY4102
Commercial Electric
HBR200B(H9)
HBR200R(H10)
Elco
EL99ICA
EL99R
Halo
H99ICT
H99T
H99RT
Intense
I4AIC
Juno
IC1
TC1
TC1R
Lithonia
LI3
L3RAT
Nora
HSIC-401AT
NSIC-402QAT
NS-401Q
NSR-404Q
NSR-404QAT
Progress
P831-AT
P832-TG
P830-TG
progresslighting.com | 5
6" and 4" LED Quick-Link: Title 24 Compliant Introducing P8071 6" & P8026 4" Quick-Link Trims Single Solution Trims These QL trims are ideal for new construction residential and light commercial applications. California Title 24 Compliant Provides a power connector in place of screw shell socket. High Lumen output P8071 6" trims are comparable to a 65w BR30 incandescent lamp. P8026 4" trims are comparable to a 50w R20 incandescent lamp.
Superior dimming capabilities When used with 3-wire low voltage electronic dimmers, these trims feature gradual dimming to 20% of full light output through the dimmer's full range. Enhanced appearance Acrylic lens diffuses the LEDs, effectively creating a single visible source. Regressed reflector and minimal optical aperture create significantly reduced glare resulting in improved quality of light.
P8071 6" Quick-Link LED Trims: IC/Non-IC, New Construction & Retrofit 12W 6" recessed LED Quick-Link trim Smooth lensed trim with integral flange IC/Non-IC Output: 502 lm (2700K), 584 lm (3500K) UL/CUL listed for wet locations Dimensions: 5" ht., 7-3/4" overall dia.
P8071-36QL/27K Chestnut, 2700K color temp P8071-36QL/35K Chestnut, 3500K color temp • • • • • • • • • • • • • • •
FEATURES 9 LED (Light Emitting Diode) lamps included 12-watt input power Quick Link power coupler Lumen output: 584 lumens (3500K), 502 lumens (2700K) Lumen output and distribution comparable to a 65w BR30 incandescent lamp CRI is 73 50,000 hours life based on 70% lumen maintenance Lamp contains no mercury, meets California Title 22 requirements Dimmable using most 3-wire low voltage electronic dimmers Die cast heat sink to maximize life expectancy and lumen output Optically controlled LED beam spread Excellent glare control and optical cutoff Frosted acrylic lens controls direct glare cULus listed for wet locations Works with P87-ATQL housing (ordered separately)
P8071-20QL/27K Antique Bronze, 2700K color temp P8071-20QL/35K Antique Bronze, 3500K color temp P8071-121QL/27K Metallic Silver, 2700K color temp P8071-121QL/35K Metallic Silver, 3500K color temp
P87-ATQL: 6" Quick-Link Housing
P8071-28QL/27K White, 2700K color temp P8071-28QL/35K White, 3500K color temp
P8071-31QL/27K Black, 2700K color temp P8071-31QL/35K Black, 3500K color temp
6 | progresslighting.com
P87-ATQL 6" Recessed New Construction Housing Integral nail bar hanger Dimensions: 7-7/8" x 10-3/4" Ceiling opening: 6-7/8" dia. Plaster frame: 7-7/8" x 10-3/4" Recessed depth: 7-1/2" Pryouts: 1/2" & 3/4" UL and CUL listed for damp locations Title 24 compliant
State-of-the-Art Technology for New Construction & Remodel Quick-Link: Title 24 Compliant Connectors Quick Link (QL) trims comply with the requirements of California Title 24 by providing a plug-in power connector in place of a screw shell socket. Ideal for residential and light commercial new construction applications where the use of screw shell sockets is restricted.
P8026 4" Quick-Link LED Trims: IC/Non-IC, New Construction & Retrofit
P8026-20QL/27K Antique Bronze, 2700K color temp P8026-20QL/35K Antique Bronze, 3500K color temp
P8026-28QL/27K White, 2700K color temp P8026-28QL/35K White, 3500K color temp
P8026-36QL/27K Chestnut, 2700K color temp P8026-36QL/35K Chestnut, 3500K color temp
P8026-121QL/27K Metallic Silver, 2700K color temp P8026-121QL/35K Metallic Silver, 3500K color temp 11W 4" recessed LED Quick-Link trim Smooth lensed trim with integral flange Output: 434 lm (2700K), 517 lm (3500K) UL/CUL listed for wet locations Dimensions: 4" ht., 5" overall dia.
P8026-31QL/27K Black, 2700K color temp P8026-31QL/35K Black, 3500K color temp
• • • • • • • • • • • • • • •
P830-ATQL: 4" Quick-Link Housing P830-ATQL 4" Recessed New Construction Housing Integral nail bar hanger Ceiling opening: 4-1/2" dia. Plaster frame: 7-7/8" x 10-3/4" Recessed depth: 5-1/2" Pryouts: 1/2" & 3/4" UL and CUL listed for damp locations Title 24 compliant
QUICK LINK AND RETROFIT FEATURES 9 LED (Light Emitting Diode) lamps included 11-watt input power Quick Link power coupler Lumen output: 517 lumens (3500K), 434 lumens (2700K) Lumen output and distribution comparable to 50w R20 CRI is 75+ 50,000 hours life based on 70% lumen maintenance Lamp contains no mercury, meets California Title 22 requirements Dimmable using most 3-wire low voltage electronic dimmers Die cast heat sink to maximize life expectancy and lumen output Optically controlled LED beam spread Excellent glare control and optical cutoff Frosted acrylic lens controls direct glare cULus listed for wet locations Works with P830-ATQL housing (ordered separately)
progresslighting.com | 7
Photometric Information
6" P8071 Trims
P8071-28: 6" 2700K with White Interior and Frosted Flat Acrylic Lens No. Lamps: 1 / Type Lamps: Nine LEDS Total Lumens: 502 S/MH / Ratio 1:0. LSI 24455 QUICK CALCULATOR CHART Large Room - RCR: 2.0 1500 to 2500 square foot area
DISTRIBUTION CURVE
INTENSITY DATA
Initial Footcandles 2'6" from floor
Initial Footcandles 2'6" from floor
QUICK CALCULATOR CHART Medium Room - RCR: 5.0 120 to 200 square foot area
Area per Fixture (sq. ft.) Room Reflectances: 80% Ceiling, 50% Wall, 20% Floor Ceiling Ht.: 9 ft.
Area per Fixture (sq. ft.) Room Reflectances: 80% Ceiling, 50% Wall, 20% Floor Ceiling Ht.: 10 ft.
SINGLE FIXTURE DATA
ZONAL CAVITY COEFFICIENTS OF UTILIZATION Effective Floor Cavity Reflectance 0.20
Ft.-C (Footcandles) are initial and measured in 2'6" from floor
P8071-28/35K : 6" 3500K with White Interior & Frosted Flat Acrylic Lens No. Lamps: 1 / Type Lamps: Nine LEDS Total Lumens: 584 / S/MH Ratio 1:0. LSI 24453. QUICK CALCULATOR CHART
QUICK CALCULATOR CHART
Medium Room - RCR: 5.0 120 to 200 square foot area
Large Room - RCR: 2.0 1500 to 2500 square foot area
Initial Footcandles 2'6" from floor
Initial Footcandles 2'6" from floor
DISTRIBUTION CURVE
Area per Fixture (sq. ft.) Room Reflectances: 80% Ceiling, 50% Wall, 20% Floor Ceiling Ht.: 9 ft.
SINGLE FIXTURE DATA
Area per Fixture (sq. ft.) Room Reflectances: 80% Ceiling, 50% Wall, 20% Floor Ceiling Ht.: 10 ft.
ZONAL CAVITY COEFFICIENTS OF UTILIZATION Effective Floor Cavity Reflectance 0.20
Ft.-C (Footcandles) are initial and measured in 2'6" from floor
8 | progresslighting.com
INTENSITY DATA
Photometric Information
4" P8026 Trims
P8026-28: 4" 2700K with White Interior & Frosted Flat Acrylic Lens No. Lamps: 1 / Type Lamps: Nine LEDS Total Lumens: 434 / S/MH Ratio 1:0. LSI 24451
Large Room - RCR: 2.0 1500 to 2500 square foot area
DISTRIBUTION CURVE
INTENSITY DATA
Initial Footcandles 2'6" from floor
QUICK CALCULATOR CHART
Initial Footcandles 2'6" from floor
QUICK CALCULATOR CHART Medium Room - RCR: 5.0 120 to 200 square foot area
Area per Fixture (sq. ft.) Room Reflectances: 80% Ceiling, 50% Wall, 20% Floor Ceiling Ht.: 9 ft.
Area per Fixture (sq. ft.) Room Reflectances: 80% Ceiling, 50% Wall, 20% Floor Ceiling Ht.: 10 ft.
ZONAL CAVITY COEFFICIENTS OF UTILIZATION
SINGLE FIXTURE DATA
Effective Floor Cavity Reflectance 0.20
Ft.-C (Footcandles) are initial and measured in 2'6" from floor
P8026-28/35K: 4" 3500K with White Interior & Frosted Flat Acrylic Lens No. Lamps: 1 / Type Lamps: Nine LEDs Total Lumens: 517 LEDS/ S/MH Ratio 1:0. LSI 24449. DISTRIBUTION CURVE
Initial Footcandles 2'6" from floor
QUICK CALCULATOR CHART Large Room - RCR: 2.0 1500 to 2500 square foot area
Initial Footcandles 2'6" from floor
QUICK CALCULATOR CHART Medium Room - RCR: 5.0 120 to 200 square foot area
Area per Fixture (sq. ft.) Room Reflectances: 80% Ceiling, 50% Wall, 20% Floor Ceiling Ht.: 9 ft.
SINGLE FIXTURE DATA
Area per Fixture (sq. ft.) Room Reflectances: 80% Ceiling, 50% Wall, 20% Floor Ceiling Ht.: 10 ft.
ZONAL CAVITY COEFFICIENTS OF UTILIZATION Effective Floor Cavity Reflectance 0.20
Ft.-C (Footcandles) are initial and measured in 2'6" from floor
INTENSITY DATA
701 Millennium Blvd. Greenville, South Carolina 29607 www.progresslighting.com
REV 07/09
As an ENERGY STAR Partner, Progress Lighting is committed to manufacturing energy efficient products while educating homeowners, homebuilders and consumers on new options available in “green’’ lighting. Additionally, Progress Lighting has received many awards for introducing decorative LED fixtures with state-ofthe-art, environmentally friendly features. www.progressled.com