Wila By Ledra Brands Inc.
Job Name:
Contact:
Ordering Code:
Fixture Type:
15774 Gateway Circle Tustin, CA 92780
PH: 714.259.9959 FAX: 714.259.9969
www.wilalighting.com
621 Recessed LED Downlight - 6” 6-3/4"
Description The 621 recessed downlight integrates the best LED technologies. Multiple beam spreads, finishes, mounting options and lumen packages allow for creative lighting solutions to illuminate architectural spaces.
6-5/8" Ceiling Cut-Out Diameter
Housing All configurations are of modular construction consisting of integral junction box from 16-gauge galvanized steel, integral driver, quick connect whip and the Module Assembly. The New Construction mounting option provides for ceiling fitting plate installation independent of the Module Assembly, allowing the finish and closing of the ceiling. 27” long steel mounting bars (MB27) are supplied for NC, IC, ICAT, or Chicago Plenum mounting options.
15-7/8"
Mounting 10-5/8"
Patented 3-point bayonet latch mounting system consists of die-cast magnesium trim ring and mounting ring with adjustable throat to accommodate up to a 2” ceiling thickness. Mounting ring incorporates integral yoke and box from 16-gauge galvanized steel for easy optical assembly.
Listings - ETLus Listed to UL1598, cETL Listed to CSA C22.2 #250.0 - Type IC with IC, ICAT, or Chicago Plenum box option - Suitable for dry and damp locations, wet location with lens option - Made in the USA - meets the requirements of the Buy American provision within the ARRA - WET LOCATION see LiteOptics pg 3
New Construction Dimensions
Ordering Code Follow the steps to specify your fixture, example: 621-4-XTM19-13LM-35K-98-DA40-120-10V-IC-INV
Series 621
Aperture 6
6”
LED XTM19
Delivered Lumen
CCT
07LM4
27K
10LM4
13LM1,2 20LM2,5 30LM
5
40LM1,5
595 lm 850 lm 1105 lm 1700 lm 2550 lm 3400 lm
50LM1,3,4,5 4250 lm
30K
V30K 35K 40K
CRI 2700K 3000K 3000K Vibrant
83 98
83 CRI
1,2
98 CRI
3500K
Reflector
Voltage
Dimming
DA20 diffuse, 20º
120 120V
10V
DA40 diffuse, 40º DA60 diffuse, 60º
277 277V
LUDH4
SA20 specular, 20º
DIM105
SA60 specular, 60º
DALI5
SA40 specular, 40º
4000K
B27K2 2700K Beauty
LUDA3
standard 0-10V dimming to 10%
Lutron Hi-lume/EcoSystem A-Series -to 1% Lutron EcoSystem H-Series -to 1% eldoLED 0-10V dimming to 1%
DIM10Z5 eldoLED 0-10V dimming to zero (0.1%) DALIZ5
eldoLED DALI dimming to 1%
eldoLED DALI dimming to zero (0.1%)
Mounting Options
LightOptics
Options
NC
CGS
FU
Fusing
EM
Emergency Battery Backup
IC1
New Construction with ceiling fitting plate, for T-bar or GWB Ceilings Insulation Contact Housing
ICAT1 Insulation Contact /Airtight housing CP1 Chicago Plenum Housing RET2
Retrofit, no ceiling pan
CFP CFS
CRO CSD DFS ETR
POB POP
POW
WETC WETD INV
clear glass screen - 6”
central etched float glass perforated - 6” central etched float glass - 6” corona ring - 6”
XFMR
480V/347V 60Hz transformer
central soft disk - 6”
diffusing screen - 6”
etched tapered ring - 6” pupil optic blue - 6”
pupil optic perforated - 6” pupil optic white - 6”
clear screen glass for wet location - 6” diffusing screen for wet location - 6” trimless appearance - 6”
Notes 1. 98 CRI not available for 40LM and 50LM. 2. B27K Beauty Series choose 98 CRI (actual 93). Available for 13LM and 20LM only. 3. LUDA not available for 50LM. 4. LUDH not available for 07LM, 10LM, and 50LM. 5. DIM10, DIM10Z, DALI, DALIZ not available for 40LM and 50LM. Available at 85% Lumen output for 30LM and 20LM (98 CRI).
QuikShip options on product webpage for download In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product.
v.6.28.16
621 - 6”
Page 1 of 5
Wila By Ledra Brands Inc.
Job Name:
Contact:
Ordering Code:
Fixture Type:
15774 Gateway Circle Tustin, CA 92780
PH: 714.259.9959 FAX: 714.259.9969
www.wilalighting.com
Xicato Series LED Performance SDCM
1 x 2 MacAdam Ellipse
Life
L80 50,000 hrs
DUV
+/- 0.001
Warranty
5 year “no color shift” warranty 5 year fixture warranty
Delivered Lumen / Wattage Chart
Standard Series Patented Cold Remote Phosphor, Xicato® XTM19 Standard Series
Source Lumens
Delivered Lumens
Fixture Wattage
2700k, 3000k, 3500k, 4000k
700 lm
595 lm
9W
83 typical
1000 lm
850 lm
12 W
97
1300 lm
1105 lm
16 W
1700 lm
25 W
2550 lm
37 W
3400 lm
49 W
5000 lm
4250 lm
56 W
Source Lumens
Delivered Lumens
Fixture Wattage
700 lm
595 lm
11 W
850 lm
15 W
1105 lm
21 W
1700 lm
33 W
3000 lm
2550 lm
42 W
Source Lumens
Delivered Lumens
Fixture Wattage
700 lm
595 lm
9W
850 lm
12 W
1105 lm
16 W
1700 lm
25 W
2550 lm
37 W
3400 lm
49 W
5000 lm
4250 lm
56 W
Source Lumens
Delivered Lumens
Fixture Wattage
CCT
Patented Cold Remote Phosphor, Xicato® XTM19 Vibrant Series (V95) 3000k
700 lm
595 lm
11 W
1000 lm
850 lm
15 W
GAIBB
98 typical 120
1300 lm
1105 lm
21 W
1700 lm
33 W
3000 lm
2550 lm
42 W
LED
CCT
CRI Ra GAIBB
Color Rendering Index (3000K Typical) Ra R1
83
82
R2 89
R3 95
R4 84
R5 82
R6 87
R7 86
2000 lm R8 65
R9 R10 R11 R12 R13 R14 R15 16
64
79
58
81
93
75
Artist Series LED
Patented Cold Remote Phosphor, Xicato® XTM19 Artist Series
CRI Ra
98 typical
CCT
GAIBB
2700k, 3000k, 3500k, 4000k
1300 lm
Color Rendering Index (3000K Typical)
2000 lm
Ra R1
R2
R3
R4
R5
R6
R7
R8
R9 R10 R11 R12 R13 R14 R15
98
99
98
98
98
97
98
98
98
99
98
88
81
98
98
Vibrant Series (V80) LED
Patented Cold Remote Phosphor, Xicato® XTM19 Vibrant Series (V80)
CRI Ra
83 typical
CCT
GAIBB
3000k
1000 lm 1300 lm
111
Color Rendering Index (3000K Typical)
2000 lm
Ra R1
R2
R3
R4
R5
R6
R7
R8
R9 R10 R11 R12 R13 R14 R15
83
89
95
84
82
87
86
65
16
82
64
79
58
81
93
75
Vibrant Series (V95) LED
CRI Ra
Color Rendering Index (3000K Typical)
3000 lm 4000 lm
2000 lm
Ra R1
R2
R3
R4
R5
R6
R7
R8
R9 R10 R11 R12 R13 R14 R15
98
92
97
96
98
96
95
94
90
99
4000 lm
1000 lm
109
98
3000 lm
97
95
97
98
98
98
Beauty Series LED
Patented Cold Remote Phosphor, Xicato® XTM19 Beauty Series
Source Lumens
Delivered Lumens
Fixture Wattage
2700k
1300 lm
1105 lm
21 W
CRI Ra
95 typical
2000 lm
1700 lm
33 W
CCT
GAIBB
133
Color Rendering Index (3000K Typical) Ra R1
R2
R3
R4
R5
R6
R7
R8
R9 R10 R11 R12 R13 R14 R15
95
96
97
94
95
92
94
95
95
96
92
91
88
95
99
97
Notes Values presented are average. Due to installation location and environment, end use performance may vary. Refer to IES file for specific values. In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product.
v.6.28.16
621 - 6”
Page 2 of 5
15774 Gateway Circle Tustin, CA 92780
Wila By Ledra Brands Inc.
Job Name:
Contact:
Ordering Code:
Fixture Type:
PH: 714.259.9959 FAX: 714.259.9969
www.wilalighting.com
Mounting and LiteOptics Follow the steps to specify your fixture, example:
621 - 6 - XTM19 - 13LM - 35K - 98 - DA60 - 277 - 10V - IC - WETC
6-1/4"
MOUNTING OPTIONS NC
New Construction with ceiling fitting
IC1
Insulation Contact Housing
RET2
Insulation Contact /Airtight housing Chicago Plenum Housing Retrofit, no ceiling pan
Notes 1. Not available for 40LM or 50LM
16-3/8"
CP1
8-3/8"
ICAT1
plate, for T-bar or GWB Ceilings
1-3/4"
2. Plenum Clearance - 8”. Adequate plenum
12"
IC, ICAT, and CP
14-1/8"
clearance is recommended when no above ceiling access is available for the installation or servicing of the driver box
2-5/8" max
3" max
7-1/8" max
DRIVER
DIMMING CONDUIT KNOCK-OUT
LINE VOLTAGE CONDUIT OPENING
9"
RET
LITEOPTICS CGS
clear glass screen - 6”
CFS
central etched float glass - 6”
CFP
CRO CSD DFS ETR
POB POP
POW
WETC WETD INV
central etched float glass perforated - 6” corona ring - 6”
central soft disk - 6”
diffusing screen - 6”
CGS
CFP
CFS
CRO
CSD
6” H: 1/2”
6” H: 1-1/2”
6” H: 1/2”
6” H: 3/4”
6” H: 1”
DFS
ETR
POB
POP
POW
6” H: 1/2”
6” H: 1-1/2”
6” H: 1/2”
6” H: 3/4”
6” H: 1”
INV
WETC
WETD
6” H: 1-1/2”
6” H: 1/2”
6” H: 1/2”
etched tapered ring - 6” pupil optic blue - 6”
pupil optic perforated - 6” pupil optic white - 6”
clear screen glass for wet location - 6” diffusing screen for wet location - 6” trimless appearance - 6”
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product.
v.6.28.16
621 - 6”
Page 3 of 5
Wila By Ledra Brands Inc.
Job Name:
Contact:
Ordering Code:
Fixture Type:
15774 Gateway Circle Tustin, CA 92780
PH: 714.259.9959 FAX: 714.259.9969
www.wilalighting.com
Options FU
Fusing
EM
Emergency Battery Backup
XFMR
480V/347V 60Hz transformer
Transformer Option
480V / 347V
Housing - Fabricated from 16 gauge steel - Finish is gray polyester powder inside and out - Flat, removable covers fastened with plated steel screws - Cover design permits easy removal without extracting cover screws - Mounting holes on back of box - Available with knockouts. Removable concentric knockouts on all four sides Electrical - Input Voltage: 480/347V, 60 Hz, 125VA - Output Voltage: 277V, 60 Hz - Max Input Current Load: 0.26A - Non-isolated Autotransformer - 5 Year Warranty - Industry Leading Listings ETLus Listed to UL5058-1 (suitable for dry and damp locations) cETL Listed to CSA C22.2 #66 Box: UL 50 Type 1, CSA Certified, Type 1, NEMA/EEMAC Type 1 Wiring 480V RED
347V BLUE
277V BLACK
COM WHITE
COM WHITE
Wiring Notes: - Wye 480V system - Connection red (or blue for 347V) and white wires to any two phase wires. - Delta 480V - Connect to grounded referenced legs only.
Knockout Pattern A - 1/2” TO 3/4”
TOP KO DIMENSIONS ARE IDENTICAL TO BOTTOM KO DIMENSIONS
1.63 A
B
B - 3/4” TO 1”
1.63
A
A
B
A
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product.
v.6.28.16
621 - 6”
Page 4 of 5
Wila By Ledra Brands Inc.
Job Name:
Contact:
Ordering Code:
Fixture Type:
15774 Gateway Circle Tustin, CA 92780
PH: 714.259.9959 FAX: 714.259.9969
www.wilalighting.com
Emergency Battery Back Up Description UL Classified LED emergency driver that allows the same LED fixture to be used for both normal and emergency operation. In the event of a power failure, the driver switches to the emergency mode and operates the existing fixture for 90 minutes. The unit contains a battery, charger, and converter circuit in a single can. The driver will operate an LED array load at 7 watts with constant power. The Constant Power design of the driver maintains the output wattage to the LED array even as the system voltage diminishes.
Specifications Input Voltage................................................................................... (Universal) 120-277VAC, 50/60Hz Input Rating (120/277)..................................................................... 3.5 Watts (max) Output Voltage1 .............................................................................. 10-60VDC Class 2 Compliant Output Current................................................................................ 0.7A (@10VDC) - 0.12A (@60VDC) Output Power.................................................................................. 7 Watts (constant) Emergency Operation..................................................................... 90 minutes Operating Temp.............................................................................. 0° to 55° C Battery............................................................................................. High Temp Nickel-Cadmium
24 Hour Recharge
7-10 Year Life Expectancy
Approval ......................................................................................... UL and CUL Classified as an LED emergency driver for field installation Notes 1. Max. output voltage in emergency mode is 58.5 VDC with a + tolerance of 1.5 volts
Features - UL Classified for Field Installation - UL 1310 Certified, Output Class 2 Compliant - Long life high temperature recyclable Ni-Cad battery - Galvanized steel case - Includes single-piece TBTS test switch and charge indicator accessory kit - For use with switched or unswitched fixtures - 5-Year Warranty. - Meets or exceeds all National Electrical Code and Life Safety Code Emergency Lighting Requirements - Listed for use in damp locations and in enclosed and gasketed fixtures.
Dimensions
1-1/4"
13"
12-5/8"
2-1/4"
In a continuing effort to offer the best product possible we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product.
v.6.28.16
621 - 6”
Page 5 of 5