Wal l mount for i Pad Ai r 2 and Sam sung G al ax y Tab A
Installation options, Europe
Installation options, Europe Option
Installation type
Cabling
Power
Page
1
Wall, directly
Concealed cable
220 V
4
2
Wall, directly
Concealed cable
PoE Powered
5
3
Wall
Visible cable
220 V
6
4
Wall
Visible cable
PoE Powered
7
5
Wall, Back box
Concealed cable
PoE Powered
8
6
Glass
Visible cable
220 V
9
7
Glass
Visible cable
PoE Powered
10
Note:
Electronics should only be installed in accordance with local regulations. Check with your local electrician before doing so .
ORDER LIST
Installation option 1
From PN hardware: 1 x Wall mount 1 x 3 M USB cable
Wall, directly Concealed cable 220 V
From 3rd party: 1 x Samsung Tab A 7” or 9,7” or 1 x iPad Air 2
+
+
1 x 3 M USB cable 1 x Wall mount
1 x Standard Samsung adapter
Note:
4
Plug the standard Samsung adapter into a 220 v socket and connect a 3 M USB cable. Pull the USB cable inside the wall. Drill a hole corresponding to the desired placement of the wall mount and pull the USB cable through the back of the wall mount. Select screws/plugs fit for the wall type and mount the wall mount directly on to the wall.
Installation option 2
ORDER LIST From PN hardware: 1 x Wall mount 1 x 3M USB cable 1 x 5,5 Volt PoE converter
Wall, directly Concealed cable PoE Powered
From 3rd party: 1 x Junction Box with lid 1 x Samsung Tab A 7” or 9,7” or 1 x iPad Air 2
+
1 x 5,5 Volt PoE converter
+ 1 x 3 M USB cable
1 x Wall mount
1 x Junction Box Consists of: 1 x Raco 8232 Square Outlet Box With Knockout 4” x 2” 1 x Raco 8752 – 4” Flat Outlet Box Lid
5
Note:
Connect RJ45/PoE cable to PoE converter placed inside a Junction box. (If required by law). Connect a 3 M USB cable to the PoE converter. Pull USB cable inside the wall. Drill a hole corresponding to the desired placement of the wall mount and pull the USB cable through the back of the wall mount. Select screws/plugs fit for the wall type and mount the wall mount directly on to the wall.
Installation option 3
ORDER LIST From PN hardware: 1 x Wall mount 1 x 3 M USB cable 1 x Wall mount plate
Wall Visible cable 220 V powered
From 3rd party: 1 x Samsung Tab A 7” or 9,7” or 1 x iPad Air 2
+
+
1 x 3 M USB cable 1 x Standard Samsung adapter
1 x Wall mount 1 x Wall mount plate
Note:
6
Plug the standard Samsung adapter into a 220 v socket and connect the tablet using a 3 M USB cable. Mount the wall mount using a Wall mount plate.
Installation option 4
ORDER LIST From PN hardware: 1 x Wall mount 1 x 5,5 Volt PoE converter 1 x 3 M USB cable 1 x Wall mount plate
Wall Visible cable PoE powered
From 3rd party: 1 x Junction Box with lid 1 x Samsung Tab A 7” or 9,7” or 1 x iPad Air 2
+
1 x 5,5 Volt PoE converter
+ 1 x 3 M USB cable
1 x Wall mount 1 x Wall mount plate
1 x Junction Box Consists of: 1 x Raco 8232 Square Outlet Box With Knockout 4” x 2” 1 x Raco 8752 – 4” Flat Outlet Box Lid
7
Note:
Connect RJ45/PoE cable to PoE converter placed inside a Junction box. Use a 3 M USB cable to connect PoE converter to tablet. Mount the wall mount using a Wall mount plate.
Installation option 5
ORDER LIST From PN hardware: 1 x Wall mount 1 x 5,5 Volt PoE converter 1 x 0,6 M USB cable 1 x Back Box Kit
Wall Concealed cable PoE powered Back Box
From 3rd party: 1 x 3 Gang Work box 1 x Samsung Tab A 7” or 9,7” or 1 x iPad Air 2
+
1 x 5,5 Volt PoE converter
+ 1 x 0,6 M USB cable
1 x Wall mount 1 x Wall mount plate 1 x Back Box plate
1 x 3 Hole work box 2,5 or 3 hole 3x68 hollow wall electrical box without internal walls or with removable walls. IE: Legrand 080103 BATIBOX IE: LK Forfra dåse 2,5 Modul 1017053780
8
Note:
Install a 3-gang Work Box into wall. Connect RJ45/PoE cable to PoE converter placed inside the 2,5 or 3 Hole Work Box. Connect the PoE converter to the tablet using a 0,6 M USB Cable. Mount the wall mountusing a Back Box Mount Kit.
Installation option 6
ORDER LIST From PN hardware: 1 x Wall mount 1 x 3 M USB cable 1 x Glass Kit
Glass wall Visible cable 220 V
From 3rd party: 1 x Samsung Tab A 7” or 9,7” or 1 x iPad Air 2
+
+ 1 x Standard Samsung adapter
1 x 3 M USB cable
1 x Wall mount 1 x Glass Kit
Note:
9
Plug the standard Samsung adapter into a 220 v socket and connect the tablet using a 3 M USB cable. Mount the wall mount using a Glass Kit.
Installation option 7
ORDER LIST From PN hardware: 1 x Wall mount 1 x 5,5 Volt PoE converter 1 x 3 M USB cable 1 x Glass Kit
Glass wall Visible cable PoE Powered
From 3rd party: 1 x Junction Box with lid 1 x Samsung Tab A 7” or 9,7” or 1 x iPad Air 2
+
1 x 5,5 Volt PoE converter
+ 1 x 3 M USB cable
1 x Mount frame 1 x Glass Kit
1 x Junction Box Consists of: 1 x Raco 8232 Square Outlet Box With Knockout 4” x 2” 1 x Raco 8752 – 4” Flat Outlet Box Lid
10
Note:
Connect RJ45/PoE cable to PoE converter placed inside a Junction box. (If required by law). Connect a 3 M USB cable to the PoE converter. Pull USB cable inside the wall. Drill a hole corresponding to the desired placement of the wall mount and pull the USB cable through the back of the wall mount. Mount the wall mount using a Glass Kit.
Copenhagen, Denmark Froelichsvej 25 DK - 2920 Charlottenlund +45 2840 1515 www.pn-hardware.com