HPX Sliding Doors
AUGUST, 2016
FEATURES
Features • Superior structural and water resistance • Hurricane Cycle tested to +130/-215 psf design pressures. • Water resistance exceeds 32 psf. • Meets South Florida Building Code and SBCCI SSTD 12 for Large and Small Missile Impact Resistance • Forced Entry Resistance tested per ASTM F842 • Available as OX, XO, OXO and OXXO configurations • Accommodates 1/4", 3/8", 9/16", 5/8" and 7/8" infills • Heavy duty stainless steel casters • Stainless steel track insert for sliding panels • Optional factory glazing, both fixed and sliding panels • Stainless steel MS Hookbolt Lock • Optional architectural finishes including anodized and applied coatings • Interior insect screens
© Kawneer Company, Inc., 2010
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
EC 97911-112
kawneer.com
ADMB060EN
1
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
HPX Sliding Doors
BLANK PAGE
ADMB060EN
kawneer.com
© Kawneer Company, Inc., 2010
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
2 AUGUST, 2016 EC 97911-112
HPX Sliding Doors
AUGUST, 2016
INDEX
ELEVATIONS ...................................................................4 STANDARD DETAILS.....................................................5 thru 7 INSECT SCREENS / INFILL OPTIONS...........................7, 8 HARDWARE OPTIONS...................................................9
LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE, WINDOW, AND CURTAIN WALL PRODUCTS VARY WIDELY. KAWNEER DOES NOT CONTROL THE SELECTION OF PRODUCT CONFIGURATIONS, OPERATING HARDWARE, OR GLAZING MATERIALS, AND ASSUMES NO RESPONSIBILITY THEREFOR. Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses ( ) are millimeters unless otherwise noted.
© Kawneer Company, Inc., 2010
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
EC 97911-112
The following metric (SI ) units are found in these details: m – meter cm – centimeter mm – millimeter s – second Pa – pascal MPa – megapascal Kawneer reserves the right to change configurations without prior notice when deemed necessary for product improvement.
kawneer.com
ADMB060EN
3
5
UNIT HEIGHT
UNIT HEIGHT
4
UNIT WIDTH 1
5
4
6
5
4
1
SLIDE
O X
6 7
8 5
OPP.
2 4
6
9
2
2
ADMB060EN
SLIDE FIXED
X O
7 6 5
OPP. OPP. OPP.
2 2
5 4
OX UNIT XO UNIT
UNIT WIDTH UNIT WIDTH
3 1 3 3 1 3
FIXED SLIDE FIXED FIXED SLIDE FIXED
O X O O X O
8 6 5
OPP. OPP. OPP.
4 2
OXO UNIT
3 1 1 3
FIXED
SLIDE
SLIDE
FIXED
O
X
X
O
6
5
OPP.
OPP. 4
OXO UNIT
UNIT WIDTH
4
OXXO UNIT
kawneer.com
© Kawneer Company, Inc., 2010
ELEVATIONS
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
HPX Sliding Doors
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
FIXED
UNIT HEIGHT
3
UNIT HEIGHT
UNIT HEIGHT
4 AUGUST, 2016 EC 97911-112
ELEVATIONS ARE NUMBER KEYED TO DETAILS UNIT WIDTH 3
© Kawneer Company, Inc., 2010
4-7/32" (107.15)
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
UNIT HEIGHT
4-11/32" (110.33)
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
AUGUST, 2016
kawneer.com
HPX Sliding Doors
EC 97911-112 STANDARD DETAILS
SCALE 3" = 1'-0' NOTE: 9/16" INFILL SHOWN. FOR ADDITIONAL GLAZING OPTIONS SEE PAGE 8.
6-3/32" (154.78)
OPERABLE HEAD FIXED HEAD
1 3
6-3/4" (171.45)
OPERABLE SILL FIXED SILL
2 4
ADMB060EN
5
1-1/4" (31.75) 4-3/16" (106.4)
2-15/16" (74.6)
UNIT WIDTH
FIXED JAMB INTERLOCK STILE LOCK JAMB
5 6 7
2-15/16" (74.6) 2-11/16" (68.3)
LOCK STILE MULLION
1/8"(3.2)
8
2-31/32" (75.4)
ADMB060EN
3-17/32" (89.7)
MEETING STILES
9
kawneer.com
© Kawneer Company, Inc., 2010
STANDARD DETAILS
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
HPX Sliding Doors
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
6 AUGUST, 2016 EC 97911-112
SCALE 3" = 1'-0"
© Kawneer Company, Inc., 2010
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
kawneer.com
2"
2"
1"
1"
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
AUGUST, 2016
HPX Sliding Doors
EC 97911-112 STANDARD DETAILS
SCALE 3" = 1'-0" OPTIONAL MEMBERS
HEAD RECEPTOR EXTERIOR GLAZED HEAD RECEPTOR INTERIOR GLAZED
NOTE: Head receptors cannot be used with insect screens.
ADMB060EN
7
SCALE 3" = 1'-0"
HEAD
SILL
NOTE: Standard screen includes plated steel hardware. Optional screen available with stainless steel hardware.
SCREEN WITH APPLIED CLOSURE FOR SCREEN LATCH
INTERLOCK
1/4" LOCK JAMB
INFILL OPTIONS
3/8"
9/16"
ADMB060EN
7/8"
5/8"
NOTE: 5/8" INFILL SHOWN GLAZED WITH SILICONE FOR LARGE MISSLE IMPACT RESISTANCE.
kawneer.com
© Kawneer Company, Inc., 2010
INSECT SCREENS / INFILL OPTIONS
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
HPX Sliding Doors
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
INSECT SCREEN
8 AUGUST, 2016 EC 97911-112
INTERIOR SCREENS
INSECT SCREEN
HPX Sliding Doors
AUGUST, 2016 EC 97911-112
HARDWARE OPTIONS
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
HARDWARE DESCRIPTION
OX, XO, OOX, XOO and OXO
(Interior) Extruded Pull with Thumbturn (Exterior) Blank Extruded Pull
OX, XO, OOX, XOO and OXO
(Interior) Extruded Pull with Thumbturn (Lock Panel) (Exterior) Blank Flush Pull
OX, XO, OOX, XOO and OXO
(Interior) Extruded Pull with Thumbturn (Lock Panel) (Exterior) Extruded Full Length Pull
OXXO
(Interior) Hurricane Thumbturn
All Configurations
© Kawneer Company, Inc., 2010
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
MS ADAMS RITE 1847 LOCK
(Interior) Extruded Pull with Thumbturn (Exterior) Extruded Pull with Applied Cylinder
kawneer.com
9
ADMB060EN
WIND LOAD CHARTS
FOR WINDLOAD OR DEADLOAD INFORMATION, PLEASE CONTACT YOUR KAWNEER APPLICATION ENGINEERING DEPARTMENT.
ADMB060EN
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
HPX Sliding Doors
kawneer.com
© Kawneer Company, Inc., 2010
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
10 AUGUST, 2016 EC 97911-112