HPX SLIDING DOOR
JANUARY, 2008 EC 97903-13
FEATURES
© Kawneer Company, Inc., 2008
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
HPX MONUMENTAL HIGH PERFORMANCE SLIDING DOORS
kawneer.com
FEATURES
-
SUPERIOR STRUCTURAL AND WATER RESISTANCE.
-
HURRICANE CYCLE TESTED TO +130/-215 PSF DESIGN PRESSURES.
-
WATER RESISTANCE EXCEEDS 32 PSF.
-
MEETS SOUTH FLORIDA BUILDING CODE AND SBCC1 12 FOR LARGE AND SMALL MISSILE IMPACT RESISTANCE.
-
FORCED ENTRY RESISTANCE TESTED PER ASTM F842.
-
AVAILABLE AS OX, XO, OXO AND OXXO CONFIGURATIONS.
-
ACCOMMODATES 1/4", 3/8", 9/16", 5/8" AND 7/8" INFILLS.
-
HEAVY DUTY STAINLESS STEEL CASTERS.
-
STAINLESS STEEL TRACK INSERT FOR SLIDING PANELS.
-
OPTIONAL FACTORY GLAZING, BOTH FIXED AND SLIDING PANELS.
-
STAINLESS STEEL MS HOOKBOLT LOCK.
-
OPTIONAL ARCHITECURAL FINISHES INCLUDING ANODIZED AND APPLIED COATINGS.
-
INTERIOR INSECT SCREENS.
kawneer.com
© Kawneer Company, Inc., 2008
BLANK PAGE
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
HPX SLIDING DOOR
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
JANUARY, 2008 EC 97903-13
HPX SLIDING DOOR
JANUARY, 2008 EC 97903-13
INDEX
ELEVATIONS ...................................................................4 STANDARD DETAILS......................................................5 thru 7 INSECT SCREENS / INFILL OPTIONS...........................7, 8 HARDWARE OPTIONS...................................................9
LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE, WINDOW, AND CURTAIN WALL PRODUCTS VARY WIDELY. KAWNEER DOES NOT CONTROL THE SELECTION OF PRODUCT CONFIGURATIONS, OPERATING HARDWARE, OR GLAZING MATERIALS, AND ASSUMES NO RESPONSIBILITY THEREFOR. Metric (S1) conversion figures are included throughout these details for reference. Numbers in parentheses ( ) are millimeters unless otherwise noted.
© Kawneer Company, Inc., 2008
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
Architects - The extrusions and window types illustrated in this catalog are standard products for Kawneer. These concepts have been expanded and modified to afford you design freedom. Please contact your Kawneer representative for further assistance.
The following metric (S1 ) units are found in these details: m – meter cm – centimeter mm – millimeter s – second Pa – pascal MPa – megapascal Kawneer reserves the right to change configurations without prior notice when deemed necessary for product improvment.
kawneer.com
5
UNIT HEIGHT
UNIT HEIGHT
4
UNIT WIDTH 1
5
4
6
5
4
1
SLIDE
O X
6 7
2
8 5
OPP.
2
6
2 5
4
9
2
3
SLIDE FIXED
X O
7 6 5
OPP. OPP. OPP.
2 4
OX UNIT XO UNIT
UNIT WIDTH UNIT WIDTH
3 1 3 3 1 3
FIXED SLIDE FIXED FIXED SLIDE FIXED
O X O O X O
8 6 5
OPP. OPP. OPP.
4 2
OXO UNIT
3 1 1 3
FIXED
SLIDE
SLIDE
FIXED
O
X
X
O
6
5
OPP.
OPP. 4
OXO UNIT
UNIT WIDTH
4
OXXO UNIT
kawneer.com
© Kawneer Company, Inc., 2008
ELEVATIONS
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
HPX SLIDING DOOR
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
FIXED
UNIT HEIGHT
3
UNIT HEIGHT
UNIT HEIGHT
JANUARY, 2008 EC 97903-13
ELEVATIONS ARE NUMBER KEYED TO DETAILS UNIT WIDTH
© Kawneer Company, Inc., 2008
4-7/32" (107.15)
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
UNIT HEIGHT
4-11/32" (110.33)
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
JANUARY, 2008
kawneer.com
HPX SLIDING DOOR
EC 97903-13 STANDARD DETAILS
SCALE 3" = 1'-0' NOTE: 9/16" INFILL SHOWN. FOR ADDITIONAL GLAZING OPTIONS SEE PAGE 8.
6-3/32" (154.78)
OPERABLE HEAD FIXED HEAD
1 3
6-3/4" (171.45)
OPERABLE SILL FIXED SILL
2 4
1-1/4" (31.75) 4-3/16" (106.4)
2-15/16" (74.6)
UNIT WIDTH
FIXED JAMB INTERLOCK STILE LOCK JAMB
5 6 7
2-15/16" (74.6) 2-11/16" (68.3)
LOCK STILE MULLION
8
1/8"(3.2)
2-31/32" (75.4)
3-17/32" (89.7)
MEETING STILES
9
kawneer.com
© Kawneer Company, Inc., 2008
STANDARD DETAILS
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
HPX SLIDING DOOR
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
JANUARY, 2008 EC 97903-13
SCALE 3" = 1'-0"
© Kawneer Company, Inc., 2008
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
kawneer.com
2"
2"
1"
1"
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
JANUARY, 2008
HPX SLIDING DOOR
EC 97903-13 STANDARD DETAILS
SCALE 3" = 1'-0" OPTIONAL MEMBERS
HEAD RECEPTOR EXTERIOR GLAZED HEAD RECEPTOR INTERIOR GLAZED
NOTE: Head receptors cannot be used with insect screens.
SCALE 3" = 1'-0"
HEAD
SILL
NOTE: Standard screen includes plated steel hardware. Optional screen available with stainless steel hardware.
SCREEN WITH APPLIED CLOSURE FOR SCREEN LATCH
INTERLOCK
1/4" LOCK JAMB
INFILL OPTIONS
3/8"
9/16"
7/8"
5/8"
NOTE: 5/8" INFILL SHOWN GLAZED WITH SILICONE FOR LARGE MISSLE IMPACT RESISTANCE.
kawneer.com
© Kawneer Company, Inc., 2008
INSECT SCREENS / INFILL OPTIONS
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
HPX SLIDING DOOR
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
INSECT SCREEN
JANUARY, 2008 EC 97903-13
INTERIOR SCREENS
INSECT SCREEN
HPX SLIDING DOOR
JANUARY, 2008 EC 97903-13
HARDWARE OPTIONS
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
HARDWARE DESCRIPTION
OX, XO, OOX, XOO and OXO
(Interior) Extruded Pull with Thumbturn (Exterior) Blank Extruded Pull
OX, XO, OOX, XOO and OXO
(Interior) Extruded Pull with Thumbturn (Lock Panel)
OX, XO, OOX, XOO and OXO
(Exterior) Blank Flush Pull
(Interior) Extruded Pull with Thumbturn (Lock Panel) (Exterior) Extruded Full Length Pull
© Kawneer Company, Inc., 2008
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
MS ADAMS RITE 1847 LOCK
(Interior) Extruded Pull with Thumbturn (Exterior) Extruded Pull with Applied Cylinder
(Interior) Hurricane Thumbturn
kawneer.com
OXXO
All Configurations
FOR WINDLOAD OR DEADLOAD INFORMATION, PLEASE CONTACT YOUR KAWNEER APPLICATION ENGINEERING DEPARTMENT.
kawneer.com
© Kawneer Company, Inc., 2008
WIND LOAD CHARTS
Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.
HPX SLIDING DOOR
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
10 JANUARY, 2008 EC 97903-13
