AUGUST, 2016

HPS™ Monumental Sliding Doors FEATURES

Features • High performance ratings for structural, air infiltration and water resistance • Meets AAMA performance class and grades of HC60, HC80, HC100 and HC120 • Meets South Florida Building Code and SBCCI SSTD 12 for Small Missile Impact Resistance • Forced Entry Resistance tested per AAMA 1303.5 • Available as OX, XO, OOX, XOO, OXO and OXXO configurations • Optional vertical mullions for additional sidelites • Accommodates 3/16", 7/32", 1/4", 5/16", 3/8", 1/2", 9/16", 5/8" and 1" infills • Optional factory glazing (Sliding Panels Only) • Heavy duty stainless steel casters • Stainless steel track insert for sliding panels • Stainless steel MS Hookbolt Lock • Optional architectural finishes including anodized and applied coatings • Interior or exterior insect screens

© Kawneer Company, Inc., 2010

Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.

Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.

EC 97911-112

kawneer.com

ADMB050EN

1

Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.

HPS™ Monumental Sliding Doors

BLANK PAGE

ADMB050EN

kawneer.com

© Kawneer Company, Inc., 2010

Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.

2 AUGUST, 2016 EC 97911-112

AUGUST, 2016

HPS™ Monumental Sliding Doors INDEX

ELEVATIONS ...................................................................4 STANDARD DETAILS.....................................................5 thru 7 INSECT SCREENS / INFILL OPTIONS...........................8 HARDWARE OPTIONS...................................................9 WINDLOAD CHARTS......................................................10

LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE, WINDOW, AND CURTAIN WALL PRODUCTS VARY WIDELY. KAWNEER DOES NOT CONTROL THE SELECTION OF PRODUCT CONFIGURATIONS, OPERATING HARDWARE, OR GLAZING MATERIALS, AND ASSUMES NO RESPONSIBILITY THEREFOR. Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses ( ) are millimeters unless otherwise noted.

© Kawneer Company, Inc., 2010

Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.

Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.

EC 97911-112

The following metric (SI ) units are found in these details: m – meter cm – centimeter mm – millimeter s – second Pa – pascal MPa – megapascal Kawneer reserves the right to change configurations without prior notice when deemed necessary for product improvement.

kawneer.com

ADMB050EN

3

UNIT WIDTH

5

4 1

SLIDE

O X

6

10 7

4

3 3

FIXED FIXED SLIDE

O O X 1

6

5

4 7

4 2

6

8

2

2

ADMB050EN

1 3

SLIDE FIXED

X O

7 6 5

OPP. OPP. OPP.

2 2

OX UNIT

UNIT WIDTH

3

5

4

OOX UNIT

3 1

FIXED

SLIDE

SLIDE

FIXED

O

X

X

O

1 4

XO UNIT UNIT WIDTH 1

6

2

6

5

OPP.

OPP.

3

FIXED SLIDE FIXED

O X O

9

Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.

ELEVATIONS

OPP.

4

OXO UNIT

UNIT WIDTH 3

4

OXXO UNIT

kawneer.com

Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.

FIXED

UNIT HEIGHT

3

UNIT HEIGHT

UNIT HEIGHT

HPS™ Monumental Sliding Doors

© Kawneer Company, Inc., 2010

5

UNIT HEIGHT

UNIT HEIGHT

4 AUGUST, 2016 EC 97911-112

ELEVATIONS ARE NUMBER KEYED TO DETAILS UNIT WIDTH

5

3-23/32" (94.46)

© Kawneer Company, Inc., 2010

Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.

kawneer.com

OPERABLE SILL (HC60/80/100) (HC120) OX, XO, OXO Only 3-3/32" (78.58)

3-3/32" (78.58)

3-23/32" (94.46)

UNIT HEIGHT

3-3/32" (78.58)

3-3/32" (78.58)

2-25/32" (70.64)

Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.

AUGUST, 2016

HPS™ Monumental Sliding Doors

EC 97911-112 STANDARD DETAILS

SCALE 3" = 1'-0' 6-3/32" (154.78)

OPERABLE HEAD (HC60/80/100/120) FIXED HEAD (HC60) FIXED HEAD (HC80/100/120)

1 3 3A

6-13/32" (162.72)

2 FIXED SILL (HC60) FIXED SILL (HC80/100/120)

4 4A

NOTE: 9/16" INFILL SHOWN. FOR ADDITIONAL GLAZING OPTIONS SEE PAGE 8.

OPERABLE SILL (HC120) OXXO Only

2A

ADMB050EN

5

STANDARD DETAILS

2-1/2" (63.5)

1/8" (3.18)

2-1/2" (63.5)

3-1/4" (82.55)

ADMB050EN

4-1/4" (109.95)

UNIT WIDTH

FIXED JAMB INTERLOCK STILE (HC60) LOCK JAMB

5 6 7

2-1/2" (63.5) 2-1/2" (63.5)

INTERLOCK STILE (HC80/100) INTERLOCK STILE (HC120)

6A 6B

2-1/2" (63.5)

MEETING STILE (HC60/80)

MEETING STILE (HC100/120)

8

8A

Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.

HPS™ Monumental Sliding Doors

1/8" (3.18)

3-1/4" (82.55)

kawneer.com

© Kawneer Company, Inc., 2010

1-1/4" (31.75)

Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.

6 AUGUST, 2016 EC 97911-112

SCALE 3" = 1'-0"

kawneer.com

2"

2"

1"

1"

© Kawneer Company, Inc., 2010

Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.

Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.

AUGUST, 2016

HPS™ Monumental Sliding Doors

EC 97911-112 STANDARD DETAILS

SCALE 3" = 1'-0"

4-1/4" (109.95) 4-1/4" (109.95)

LOCK STILE MULLION (HC60) LOCK STILE MULLION (HC80/100)

9 9A

4-1/4" (109.95) 2-1/2" (63.5)

LOCK STILE MULLION (HC120) FIXED MULLION

9B 10

OPTIONAL MEMBERS

HEAD RECEPTOR EXTERIOR GLAZED

HEAD RECEPTOR INTERIOR GLAZED

NOTE: Head Receptors cannot currently be used with Interior Screens.

ADMB050EN

7

HPS™ Monumental Sliding Doors

8

AUGUST, 2016

INSECT SCREENS / INFILL OPTIONS

SCALE 3" = 1'-0"

EC 97911-112

EXTERIOR SCREENS

HEAD

SCREEN WITH APPLIED CLOSURE FOR SCREEN LATCH

INSECT SCREEN NOTE: Standard screen includes plated steel hardware. Optional screen available with stainless steel hardware.

SILL

INTERIOR SCREENS

HEAD

Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.

LOCK JAMB

INSECT SCREEN

INTERLOCK

INTERLOCK

NOTE: Standard screen includes plated steel hardware. Optional screen available with stainless steel hardware.

SILL

NOTE: Also available with 3/16" and 7/32" infills.

1/4"

LOCK JAMB

5/16"

3/8"

INFILL OPTIONS 1/2"

ADMB050EN

9/16"

5/8"

1"

kawneer.com

© Kawneer Company, Inc., 2010

SCREEN WITH APPLIED CLOSURE FOR SCREEN LATCH

Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.

INSECT SCREEN

INSECT SCREEN

HPS™ Monumental Sliding Doors

AUGUST, 2016

HARDWARE OPTIONS

EC 97911-112

© Kawneer Company, Inc., 2010

Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.

Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.

HARDWARE DESCRIPTION

AR MS 1847 LOCK

(Interior) Extruded Pull with Thumbturn (Exterior) Extruded Pull with Applied Cylinder or Blank Extruded Pull

XO, OX, OXO

(Interior) Extruded Pull with Thumbturn (Exterior) Blank Flush Pull

XO, OX, OXO

(Interior) Full Length Extruded Pull with Thumbturn (on Lock Panel) (Exterior) Blank Flush Pull

OXXO

(Interior) Full Length Extruded Pull with Thumbturn (on Lock Panel) (Exterior) Blank Extruded Pull

OXXO

(Interior) Flush Pull with Slide Operator (Exterior) Blank Flush Pull

XO, OX, OXO

(Interior) Flush Pull with Slide Operator (Exterior) Flush Pull with Cylinder

XO, OX, OXO

AR MS 1850A-505 HOOKBOLT

(Interior) Blank Extruded Pull with Mortise Cylinder or Thumbturn (Exterior) Blank Extruded Pull with Mortise Cylinder

XO, OX, OXO

(Interior) Blank Extruded Pull with Mortise Cylinder or Thumbturn (Exterior) Blank Flush Pull with Mortise Cylinder

XO, OX, OXO

(Interior) Full Length Extruded Pull with Mortise Cylinder or Thumbturn (Exterior) Blank Extruded Pull with Mortise Cylinder

OXXO

(Interior) Full Length Extruded Pull with Mortise Cylinder or Thumbturn (Exterior) Blank Flush Pull with Mortise Cylinder

OXXO

(Interior) Dummy Flush Pull with Mortise Cylinder or Thumbturn (Exterior) Blank Flush Pull with Mortise Cylinder

XO, OX, OXO

kawneer.com

9

ADMB050EN

WIND LOAD CHARTS

FOR WINDLOAD OR DEADLOAD INFORMATION, PLEASE CONTACT YOUR KAWNEER APPLICATION ENGINEERING DEPARTMENT.

ADMB050EN

Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor.

HPS™ Monumental Sliding Doors

kawneer.com

© Kawneer Company, Inc., 2010

Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.

10 AUGUST, 2016 EC 97911-112