How to use Life Stick ◆ The set of Life Stick’s device:
◆ Remote-control keys
Check your box following these items:
Microphone (It can not use in initial installation)
1: USB Life Stick 2:Remote-control 3:AC Adapter
4:HDMI cable extension 5:User's manual
◆ Connect Life Stick to TV
To HDMI port LAN cable installed on the wall
① Connect USB Life Stick to the TV's HDMI port. ※ If it’s hard to connect the Life Stick to TV, please use the cable extension HDMI.
①Connect the LAN cable to the AC Adapter. ②Plug the AC Adapter into an electric outlet.
② Use the button “入力切換" on the TV remote-control to switch over HDMI display .
You can watch the guideline on video You can watch the guideline video on YouTube following URL or QR code below: https://youtu.be/JKtGHjzOkAE
Connect the power cable to the Life Stick.
How to use Life Stick ◆ life Stick software update When you start the display mode, you will see the system updating screen as below. During loading the data, please do not touch anything. (The loading will take around 10 to 20 minutes to finish.)
◆ How to set up remote control
Please open the back cover of the remote control and remove the insulation tape. Press Press and hold for more than 5 seconds
hold for more than 5 seconds.
※During pressing the button s, please do it near the LIFE STICK ※Sometime s it will take more than 10 seconds , so please press longer as possible.
The progress of loading will be displayed. Please press "Enter“ button to complete the pairing.
How to reset the Remote Control If the pairing of the remote control had been cancelled, please follow the steps below to set up the remote control again. ①Unplug the power cable from Life Stick and plug it back. ②Press
at the same time and hold it for a few seconds.
③After detection of the remote control, the setting screen will be displayed.
You can watch the guideline on video You can watch the guideline video on YouTube following URL or QR code below System’s update：
https://youtu.be/7iFtyEctXkw How to set remote controller
How to use Life Stick ◆ How to login the Google account
Attention ! You can login with your google account later. Because it is optional , you can select "スキップ(skip)“. Skipping this step will not affect the setting. For the customer that do not have a Google Account, please click on the link below: https://accounts.google.com/NewAccount?hl=ja
Please choose the language. （Japanese or English）
Enter your password and click “次へ (next)”.
Google account login. Please choose“アカウントとパス ワードを入力してログイン” (enter your account and password to login)
Please enter your email using the keyboard on the screen.
※This step is optional , you can select skip . ※Google account is required to login.
After that, move the cursor to “次へ (next)” on the right corner.
For example:"○○○○@gmail.com“ It is possible to enter ○○○○ only.
You can watch the guideline on video
This screen asks for permission to access your location . For the LEONET application, it doesn’t matter if you choose はい （yes） or いいえ （no）. Please select one.
You can watch the guideline video on YouTube following URL or QR code below: https://youtu.be/fmmXKOcGILk
How to use Life Stick ◆ How to login LEONET
Attention ! To avoid forget your LEONET ID or password, make a note and keep it in safe. In case , you forget your LEONET ID or password , you can recovered it, using the “秘密の質問” （secret question）. Please keep in your note. ※The answer can use alphabet letters.
To verify the terms and conditions of service, select「利用規則の確認」. After read, please click “戻る” to go back and press 「同意する」(agree) to go to the next step.
Enter your LEONET ID on 「LEONET ID」 and “PASSWORD“ on 「パス ワード」 and then press 「次へ」 （ Next）. If you've already set the ID and password, please enter the ID and password you set.
Enter your LEONET ID on 「初期設定 番号 」 and “Room No.” on 「号室」 and click “次へ”（next) . You can check the LEONET ID on the LEONET document.
Choose a new “LEONET ID“ with minimum 4 characters (alphabet letters and numbers ) and click on 「登録」（register）.
Choose a new “Password” with minimum 8 characters (alphabet letters and number s) , enter it twice and click on 「登録」（register）.
※ After registering, this is your new ID. Please keep it in safe. ※If you've already set your ID on web or APP , this screen will not display.
※ After registering, this is your new Password. Please keep it in safe. ※ If you've already set your ID on web or APP , this screen will not display.
Select one among the four questions for setting the “Secret question“. ※ In the case, you forget your LEONET ID or password ,the “Secret question “ can help you to recover it . Please keep it in your note. ※ The answer can use alphabet letters. ※ If you‘ve already set your “secret question” on web or APP , this screen will not display.
How to use Life Stick ◆ How to login LEONET
Enter your "Name", "Date of Birth", “Gender", “Telephone Number“ for the User’ information.
Please confirm the information you entered. If nothing is wrong, please click “登録 (Sign)”.
The setting is finished. Please select “次へ” (next). The top page of LEONET will display.
You can watch the guideline on video You can watch the guideline video on YouTube following URL or QR code below: https://youtu.be/KM4cOeIanBg
How to use Wi-Fi If you signed the contract of the Internet (Standard plan, premium plan or Internet only), the "SSID (access point ID)" and "Password“ will display at the upper-right corner of the HOME screen. Please set up "SSID (access point ID)" and "Password" on your smartphone · PC for using the Wi-Fi.