Contamination Control How to use
Contamination control Controlled environment Vileda Professional works to optimize cleaning in controlled environments. Streamed lined and uniformed working methods ensure a high standard. With focus on environment and ergonomics we wish to help our customers to do maximum cleaning in and around the critical areas. By minimizing the use of expensive water and limit the chemical use to the most necessary, the products of Vileda have prooved the ability to keep classified areas clean. We work in all controlled environments Pharmacy • Sterile areas • No sterile areas • Wet areas • CNC areas Electronics • ESD - Electrostatic Discharge • Dust free areas Products Our products and methods are adjusted to environments that work according to ISO Class 4-5-6-7-8 and CNC. For further information about our products look at www.vileda-professional.com, choose your country and click on products and then Cleanroom. Consumption Analysis We will work out a schedule of consumption of mops and cloths per room. With a plan of each room there will be 100% assurance that all employees are uniform in quality and consumption.
Certifikat Navn Efternavn
Instruction and practice is a must Certification of production and cleaning employee is a service that we offer to all our customers. Our certificate is valid for 12 months from date of issue and prior to the expiration retraining must be made, after which the new certificate is issued.
har gennemgået Viledas træning af metoder, ergonomi og teknik i grundlæggende laboratorie rengøring.
Allan Zacho Cleanroom specialist Sales & Country Manager
4. februar 2013
Setting the telescopic handle 1.
Place the handle and the frame in front of you in raised position, hold on top of the handle with your right hand.
Place your left foot on the frame.
Stretch your right hand out until the handle is diametrically to the frame.
Move your right hand inwards, while the height of the handle is adjusted. Position between the nose and upper lip is ergonomically correct.
Dustpan and Sweeper 1.
Place the plastic bag around the stainless steel plate at the bottom and the hook to the handle.
Sweep waste and dirt, also wet.
Move hook up to the bag is tight, then lock the hook.
3. Place the dustpan behind the waste and sweep it in a S-movement on the plate and into the bag.
Working method Impregnation of the mops 1.
Fold the amount of mops that are needed with the inner side against each other. The strop shall turn against the front.
Place the sieve on top of the box.
3. Prepare water and perhaps chemical in a measuring cup or bucket and spread it through the sieve over the folded mops in the box.
Installation of the mop on the frame 1.
Hold the frame in the grippinghole.
Grasp the strap on a mop from the box.
3. At first the dark clamp is placed in the mop, and then the mop is pulled gently over the frame.
Skirting Place the frame upright against the wall and wipe the skirting.
Wiping and the S-Movement 1.
Remove any large waste (also glass) by using Multi Squeegee (sweeper).
Start cleaning at the place where you want to change the dirty mop. Make a wet trail to the farthest place in the middle of the (shared) area.
The arrow on the frame always points in the cleaning direction.
Return by making an S-movement and spread the water evenly over the surface.
Floor cleaning with the S-Method (desinfection) In order to ensure a smooth laying of disinfectant liquid, it is important to work as the drawing shows. • Find a suitable floor area, start with a new mop and take it from the installation place to a wall/machine or the last ending place. • In this way the liquid of the mop is left for later use. • Then we will work backward from side to side, step by step working the mop in the previously designated ”fluid stripe” ensuring there be equally liquid on the floor. • Uniform liquid spraying ensure good contact time with the liquid. • Micro fiber will thus provide maximum cleaning power - when the mop is not too wet!
Wiping in corners floor or wall Follow the wall to the corner. Turn the mop and continue along the next wall without lifting the mop from the floor.
Follow the wall up to the corner. Turn the mop and continue along the ceiling with an Smovement down the wall without lifting the mop from the surface.
Cleaning of wall and ceiling Because the system is lightweight (only 1300 grams for handle+frame+ impregnated mop) and the friction of the mop on the surface is low, it is very pleasant to clean vertical surfaces with the Swep mop.
The telescopic handle Vario can be adjusted to 180 cm (excluding the frame). Is there a need for a longer telescopic handle the Evolution handle can be used, which has a range of up to 6 meters. This allows cleaning of high walls and ceilings.
Removing the Swep mop 1.
Hold the handle. Pull the lever that pushes the mop of the frame.
Fold the lever back. Put the dirty mops for washing.
Cleaning of hard-to-reach areas Thanks to the very thin frame difficult places can easily be reached and be cleaned (eg. behind or under equipment).
By simply adjusting the telescopic handle it is easy to clean confined areas with the Swep system.
Cleaning the pipes, walls or on machines Use MicronSleeve on an Evolution frame and adapter.
Dosage Guide to impregnate mops and cloths Fluid flow per. unit Size cm
38 x 40
30,5 x 30,5
30,5 x 30,5
Wiping technique - on/in LAF bench and the like
1. Follow the procedure in place for safety / risk of infection and wear clean room gloves. Place the cloth on a clean surface.
2. Fold the cloth half by taking the two ends that are closest to the edge farthest from you.
3. For more clean surfaces, fold the cloth once more to quarter size. The cloth is ready for use, apply liquid.
4. Before wiping, be aware that the folded edge is facing the area to be wiped. Keep the open side between thumb and forefinger. Wipe from the cleanest area to the dirtiest in one direction.
5. Now turn the cloth and wipe again from the next clean area to the dirty area in one direction. Try not to overlap the wiped area with more than 10%.
Positioning of wipes
Cleaning trolley for Controlled Environment ISO Class 4-5-6-7 GMP A-B-C Flexible trolley which can be customized as needed. • Box with or without lid • Bucket 6 or 22 L • 1-2 or 6 boxe • Innovative handle holder - easy application • Color coding of boxes, buckets and telescopic handle
ISO Class 8 GMP D Micro Trolley (galvanized steel) comes standard with the following equipment: • 2 buckets 6 L • 1 box with lid • 60 L waste bag frame
Stainless steel electropolished • Free of infection • Easy to clean • Can be autoclaved
Guides Controlled Environment Cloths Guide 21: Pretreatment with strainer and box Guide 22: Cloths with spray method
Mops Guide 22: Pretreatment with strainer and box
Brochures re. Controlled Environment
Vileda Professional - a part of the Freudenberg Group Vileda Professional provides innovative cleaning solutions and systems for professional users in various application areas, such as General Building, Healthcare, HoReCa and Controlled Environment. With sales offices in all major European countries, in North America and Asia – and with a wide net of representatives – we are well located around the world. Vileda Professional belongs to the Freudenberg Group – a diversified family-run global company, headquartered in Germany.
Freudenberg Household Products Vileda Professional • Transportbuen 9 • 4700 Næstved Tel. (+45) 7021 0052 • Fax (+45) 7021 3370 www.vileda-professional.dk • [email protected]
Freudenberg Household Products Oy Ab Vileda Professional • Hämeentie 3 • 00530 Helsinki Puh. (+358) 0424 2861 • Fax (+358) 8545 6130 www.vileda-professional.fi • [email protected]
Freudenberg Household Products A/S Industriveien 25, inngang B • Postboks 220 • 2021 Skedsmokorset Tel. (+47) 63 87 26 66 • Fax (+47) 64 83 78 01 www.vileda.no
Freudenberg Household Products AB Box 4013 • 203 11 Malmö Tel. (+46) 040 669 50 50 • Fax (+46) 040 - 669 50 20 www.vileda-professional.se • [email protected]
Helping you make a difference. 12