DRD2 Recessed LED Downlight Fire and Sound-Rated New Construction 4”, 5”, 6” Aperture P R O D U C T S P E C I F I C AT I O N S
Frame-in Kit HOUSING: Fire and sound-rated housing. Up to 120 minute fire rated
L500 (floor-ceiling) & P500 (roof-ceiling) design. Die formed #20 gauge galvanized steel construction. Snap on galvanized cover. Non-combustible matt insulation. Available in standard or shallow height. JUNCTION BOX: Pre-wired #18 gauge galvanized steel junction box
with (7) 1/2” knockouts and (4) Romex® knockouts and removable plates. Supplied with quick connectors for easy installation. Through branch wiring maximum of (8) #12 AWG 90ºC branch circuit connectors (four-in, four-out). MOUNTING: Pre-installed adjustable bar hangers engineered to accommodate lumber, laminated beams and T-bar. CEILING: 1/2” up to 1”. CUTOUT: 4 3/8” (4” frame-in kit, 4” shallow frame-in kit), 5 3/4” (5” frame-in
kit), 6 3/8” (6” frame-in kit, 6” shallow frame-in kit). 6” application shown
Light Engine LED: Tightly binned, high performing white Cree® LEDs enable excellent fixture to fixture color consistency and long lifetime. Delivers 93+ CRI in all available color temperatures.
• F ire Rated: UL Listed fire resistance rated for up to two hours
BINNING: Color variation within 2-step MacAdam ellipse. CONNECTOR: IDEAL PowerPlug® Luminaire Disconnect, female. Alternate module construction with 0-10V, EcoSystem® dimming and/or Emergency Battery Backup Unit uses a IDEAL PowerPlug® Model 102 connector.
• S ound Rated: Constructed to dampen unwanted noise
DRIVER: Integral electronic driver for 120/277V 50/60Hz operation. Electronic driver compatible with forward and reverse phase-control dimming at 120V only.
• 750 & 1000 lumen outputs
POWER CONSUMPTION: 11.8W (750 Im module), 14.7W (1000 lm module).
• 2700K, 3000K, 3500K, 4000K CCT
DIMMING: TRIAC/ELV dimming standard for 120V only, with flicker-free
dimming to less than 5% of total lumen output. Optional 0-10V or EcoSystem® dimming available for 120/277V.
• F licker-free TRIAC/ELV, 0-10V, or EcoSystem® dimming
EMERGENCY LIGHTING: Optional Emergency Battery Backup Units
available for emergency lighting up to 120 minutes. RATED LED LIFE: 50,000 hours at 70% lumen maintenance, based on
• IC rated, cULus Listed, ENERGY STAR® qualified, Title 24 compliant, UL Fire Listed, UL Listed for Wet Location, ASTM E283 certified Air Tight
MULTIPLE
IESNA LM 80-2008 standard (L70, B50). PHOTOMETRIC TESTING: Tested in accordance to IESNA LM-79-2008. LISTINGS: IC rated. cULus Listed. ENERGY STAR® qualified. Title 24
compliant. UL Fire Listed. UL Listed for Wet Location. ASTM E283 certified Air Tight. CEC listed. WARRANTY: 5 year limited warranty.
TWIST
50,000 hrs INSTALLATIONS
DIMMABLE
& LOCK
70% lumen maintenance
Trim
WARRANTY
CONSTRUCTION: Die-cast aluminum. Twist & Lock mounting allows easy field installation and tight ceiling fit.
Product Code:
Type:
Project:
Contact:
dmf Lighting
®
1118 E. 223rd St. Carson, CA 90745
T: 1.800.441.4422
© 2015 DMF Lighting. All Rights Reserved. Specifications subject to change without notice.
Date: www.dmflighting.com Page 1 of 9 | V-11.15.15
DRD2 Recessed LED Downlight Fire and Sound-Rated New Construction 4”, 5”, 6” Aperture PRODUCT SELECTION GUIDE Product Code Example: F4L
FRAME-IN KIT APERTURE
HOUSING
HOURLY RATING
OPTION
F4L 4” Aperture
[Blank] Fire and Sound-Rated Housing
[Blank] 1 Hour Fire Rating
[Blank] TRIAC Dimming (Standard)
2
7O
0-10V Dimming 750 lm
10O
0-10V Dimming 1000 lm
7C
EcoSystem® Dimming 750 lm
10C
EcoSystem® Dimming 1000 lm
7TEM
TRIAC Dimming w/ Emergency Battery 750 lm
10TEM
TRIAC Dimming w/ Emergency Battery 1000 lm
7EM
0-10V Dimming w/ Emergency Battery 750 lm
10EM
0-10V Dimming w/ Emergency Battery 1000 lm
7CEM
EcoSystem® Dimming w/ Emergency Battery 750 lm
F5L 5” Aperture F6L 6” Aperture
SH
Fire and Sound-Rated Shallow Housing
2 Hour Fire Rating
Not available in shallow housing
Not available in 5” aperture
10CEM EcoSystem® Dimming w/ Emergency Battery 1000 lm Product Code Example: DRD2M7927
LIGHT ENGINE PRODUCT CODE
LUMENS (WATTS)
CRI
CCT
OPTION
DRD2M Module
7
9 93+ CRI
27 2700K
A
750 lm (11.8W)
10 1000 lm (14.7W)
30 3000K
Not compatible with 4” aperture frame-in kit
35 3500K
Alternate Construction
Uses an IDEAL Model 102 connector for alternate dimming option compatibility; Must be selected if alternate dimming option is selected for frame-in kit
40 4000K Product Code Example: DRD2TR4SWH
TRIM PRODUCT CODE
SHAPE
APERTURE
STYLE
DRD2T
R Round
4 4” Aperture
S
Smooth
WH White
S Square
5 5” Aperture
B
Baffle
BK
6 6” Aperture
W
Wall Wash
SW Silver Reflector, White Flange
Trim
Only available in 4” aperture; smooth style; white, black or custom finish
FINISH
Only available in white finish
AZ
D Deep
®
1118 E. 223rd St. Carson, CA 90745
Low Iridescent Reflector, White Flange
Only available in deep shape
Only available in 6” aperture; smooth or baffle style; white, low iridescent or custom finish
dmf Lighting
Black
CC
T: 1.800.441.4422
© 2015 DMF Lighting. All Rights Reserved. Specifications subject to change without notice.
Custom Color
www.dmflighting.com Page 2 of 9 | V-11.15.15
DRD2 Recessed LED Downlight Fire and Sound-Rated New Construction 4”, 5”, 6” Aperture FR AME-IN KIT DIMENSIONS F4L 4” Fire and Sound-Rated New Construction IC Frame-in Kit
F4LSH 4” Shallow Fire and Sound-Rated New Construction IC Frame-in Kit
818" 206mm
6" 152mm
438" 111mm
438" 111mm
UP TO 24" [UP TO 610mm]
UP TO 24" [UP TO 610mm]
12 1 2 " 318mm
dmf Lighting
®
1118 E. 223rd St. Carson, CA 90745
12 1 2 " 318mm
T: 1.800.441.4422
© 2015 DMF Lighting. All Rights Reserved. Specifications subject to change without notice.
www.dmflighting.com Page 3 of 9 | V-11.15.15
DRD2 Recessed LED Downlight Fire and Sound-Rated New Construction 4”, 5”, 6” Aperture FR AME-IN KIT DIMENSIONS F5L 5” Fire and Sound-Rated New Construction IC Frame-in Kit
F6L 6” Fire and Sound-Rated New Construction IC Frame-in Kit
818" 206mm
818" 206mm
534" 146mm
638" 162mm
UP TO 24" [UP TO 610mm]
UP TO 24" [UP TO 610mm]
12 1 2 " 318mm
dmf Lighting
®
1118 E. 223rd St. Carson, CA 90745
12 1 2 " 318mm
T: 1.800.441.4422
© 2015 DMF Lighting. All Rights Reserved. Specifications subject to change without notice.
www.dmflighting.com Page 4 of 9 | V-11.15.15
DRD2 6" 152mm
FR AME-IN KIT DIMENSIONS
Recessed LED Downlight Fire and Sound-Rated New Construction 4”, 5”, 6” Aperture
F4LSH 4” Shallow Fire and Sound-Rated New Construction IC Frame-in Kit
6" 152mm
638" 162mm
UP TO 24" [UP TO 610mm]
638" 162mm
12 1 2 " 318mm
TRIM DIMENSIONS UP TO 24" [UP TO 610mm]
DRD2TR4 4” Round Trim
DRD2TR4W 4” Wall Wash Trim
DRD2TS4 4” Square Trim
178" 47mm " 3mm 1
8
2 16" 61mm 7
12 2 " 318mm
234" 69mm
1
1 8" 3mm 1 8" 3mm
11 16" 18mm
2" 51mm 2" 51mm
234" 70mm
3916" 91mm 5" 127mm
5" 127mm
dmf Lighting
®
1118 E. 223rd St. Carson, CA 90745
T: 1.800.441.4422
© 2015 DMF Lighting. All Rights Reserved. Specifications subject to change without notice.
178" 48mm 178" 48mm
412" 114mm 412" 114mm
412" 114mm 41 " 2
114mm
www.dmflighting.com Page 5 of 9 | V-11.15.15
DRD2 Recessed LED Downlight Fire and Sound-Rated New Construction 4”, 5”, 6” Aperture TRIM DIMENSIONS DRD2TR5 5” Round Trim
DRD2TR5W 5” Wall Wash Trim 1916" 40.08mm 1 8" 3.31mm
234" 70mm
238" 60mm 3516" 84mm
7 8" 23mm
5" 128mm
612" 165.10mm
612" 165mm
DRD2TR6 6” Round Trim
DRD2TR6W 6” Wall Wash Trim 1916" 40mm 1 8" 3mm
238" 60mm 8" 23mm 7
31316" 96mm
234" 70mm
6" 153mm
712" 191mm
712" 191mm
358" 93mm 1 16" 1mm
DRD2TD6 6” Deep Trim
358" 93mm
21116" 68mm
7" 178mm
1 16" 1mm
dmf Lighting
®
1118 E. 223rd St. Carson, CA 90745
T: 1.800.441.4422
© 2015 DMF Lighting. All Rights Reserved. Specifications subject to change without notice.
www.dmflighting.com Page 6 of 9 | V-11.15.15
DRD2 Recessed LED Downlight Fire and Sound-Rated New Construction 4”, 5”, 6” Aperture LIGHT ENGINE OVERVIE W
DRD2M LED Module
DRD2M7
DRD2M10
Delivered Lumen Output (lm)
750
1000
Rated Power (W)
11.8
14.7
Efficacy (lm/W)
64
68
1 16" 37mm 7
Color Consistency
2-step SDCM
CCT Options
2700K, 3000K, 3500K, 4000K
Color Rendering Index CRI /R9
60
Lifetime (L70)
50,000
Max Ambient Operating Temperature
40°C
Input Voltage (V)
120/277V, 50/60Hz
378 " 98mm
dmf Lighting
®
93+
Input Current at 120V (Max)
0.10A
0.13A
Input Current at 277V (Max)
0.042A
0.053A
Power Factor
>0.9
Total Harmonic Distortion