Inhaltsübersicht / Contents
Schruppbohrsysteme Rough boring system
10 - 19
Feinbohrsysteme Fine boring system
21 - 39
Feinbohrsysteme Fine boring system
03 - 09
Schruppbohrsysteme Rough boring system
Modular - Mod-Flex - Systeme Modular - Mod-flex system
Modular - Mod-Flex - Systeme Modular - Mod-flex system
00
Seite / Page
01
Modularsysteme Modular system
Systembeschreibungen System description
Mod-flex systeme Mod-flex system
Werkzeugaufnahmen Adapters
Verlängerungen / Reduzierungen Extensions / Reducers
04 - 05
06
07 - 08
09
Schruppbohrsysteme Rough boring system
00
TWINBORE
: Bohrköpfe (Ø28 - Ø355) / Schneidenträger Boring heads (Ø28 - Ø355) / Insert holders
10 - 11
TRIBORE
: Bohrköpfe (Ø48 - Ø245) / Schneidenträger Boring heads (Ø48 - Ø245) / Insert holders
12 - 13
TWINBORE / : Bohrköpfe (Ø190 - Ø1015) / Schneidenträger Boring heads (Ø190 - Ø1015) / Insert holders TRIBORE
14 -17
TWINBORE / : Ersatzteile TRIBORE Spares
18 -19
03
Modular - Mod-Flex - Systeme Modular - Mod-flex system
Modular - Mod-Flex - Systeme Modular - Mod-flex system
TWINBORE / TRIBORE - Systembeschreibungen System description
TWINBORE und TRIBORE Werkzeuge sind ein komplettes Programm von Systemwerkzeugen für die Schruppbearbeitung. Die Einmaligkeit des Angebotes von Zweischneidern und Dreischneidern als Werkzeug-Familie erlauben dem Anwender, das für seine Bearbeitung wirtschaftlichste Werkzeug zu wählen. Besondere Vorteile • Flexibilität in der Anwendung • Senkung von Bearbeitungszeiten • Erhöhung der Maschinenkapazitäten Überzeugende technische Konzeption • Prismaverzahnung für höchste Kraftaufnahme bei optimalem Kräfteverlauf • Kompakte Bauweise für besonders gute Spanabfuhr • Besonders große Bohrbereiche der einzelnen Bohrköpfe; das bedeutet weniger investitionskosten • Innere Kühlschmierstoffzuführungen direkt auf die Werkzeugschneiden • Jede Schneide wird individuell verstellt • Zentrischer und exzentrischer Einsatz möglich
Bohrkopf Boring Head
Mit TWINBORE und TRIBORE Werkzeugen wird die Wirtschaftlichkeit Ihrer Produktion wesentlich erhöht. TWINBORE and TRIBORE tooling provide a full range of rough boring tools. The range offers the selection of 2-blade and 3blade boring heads. Within this tooling family the user can produce components with the most economical type of tool available. Particular advantages • Flexibility of application • Reduction of machining cycle time • Increase of machine capacities Convincing technical design • Angular serrations to absorb highest cutting forces • Compact design to secure best chip removal and maximum rigidity • Extra large boring capacities of each boring head; that reduces capital investment • Internal coolant supply, directly to the cutting edges • Each insert holder can be adjusted individually • Centric and step-boring application possible Economy and productivity can be increased with the application of TWINBORE and TRIBORE.
Resultierende Schneidkräfte Resultant force direction
Radialkraft Radial force
Vorschubkraft Axial force
Eine hohe Kraftaufnahme wird durch die prismatische Form zur Aufnahme der Schneidenträger erreicht. Während der Bearbeitung bilden die Vorschubkraft und die Radialkraft eine Resultierende, welche die Schneidenträger fest in die Bohrköpfe drückt. Durch diese Anordnung wird die Auflagefläche für die Schneidenträger erheblich grösser, als es bei Werkzeugen mit planliegenden Flächen der Fall ist. Als Ergebnis aus diesem einmaligen Konstruktionsvorteil sind eine extrem hohe Belastbarkeit und Laufruhe dieser Werkzeuge abzuleiten. The high clamping pressure resulting through the prismatic seating shape combined with the high surface area contact of the serration design ensures optimum rigidity over the extensive adjustment range of the boring heads when used in both concentric and step-boring applications. As a result of the unique engineering features an extreme robustness and vibration-free machining are achieved.
04
00
TWINBORE und TRIBORE Werkzeuge können für unterschiedliche Bearbeitungsverfahren eingesetzt werden. Zum einen ist es die Standardbearbeitung, d.h. zentrischer Einsatz und zum anderen ist es der exzentrische Einsatz, das Stepboring. TWINBORE and TRIBORE tooling can be used in different applications. One is Standard-boring, i.e., concentric application the other is Step-boring, i.e. eccentric application.
Standardbearbeitung / Standard-boring
Modular - Mod-Flex - Systeme Modular - Mod-flex system
Modular - Mod-Flex - Systeme Modular - Mod-flex system
TWINBORE / TRIBORE - Systembeschreibungen System description
Step-boring / Step-boring
Bei der Standardbearbeitung werden beide bzw. die drei Schneiden auf denselben Bohrdurchmesser und auf dieselbe Bohrlänge eingestellt. Dadurch wird es möglich, dass mit doppeltem, bzw. dreifachem Vorschub gearbeitet werden kann. Beim “Stufenbohren” Werden die Schneidenträger auf unterschiedliche Bohrdurchmeser und Bohrlängen eingestellt. Bei TWINBORE Werkzeugen wird ein und bei TRIBORE Werkzeugen werden zwei Schneidenträger getauscht. Der Vorschub wird auf die Leistung eines einschneidigen Werkzeuges eingeschränkt. Der Vorteil der mehrschneidigen Werkzeuge liegt dann in der grösseren Spantiefe. “Stufenbohren” wird in Fällen angewandt, wenn z.B. Gussversätze zu überbrücken sind, oder wenn die Werkstückspannung nur reduzierte Kräfte aufnehmen kann.
On Standard boring applications two or three (depending on system) insert holders are set to the same bore diameter and boring length. Thus it is possible to machine with double or triple feed rate. When “Step Boring” all insert holders are adjusted to different diameter and length dimensions. This is possible by the choice of various standard insert holders. The feed rate is limited to the conditions of single point cutting. However, the advantage results in a higher chip depth. Step-boring is practiced on machining of castings when tolerances of bores vary or when the clamping of the components can absorb limited forces only.
00
05
Modular - Mod-Flex - Systeme Modular - Mod-flex system
Modular - Mod-Flex - Systeme Modular - Mod-flex system
Mod-Flex - Systembeschreibungen Mod-Flex - System description Modular & Flexible system
F2
A
XFA
F2
FA FA
A
SECTION A-A
Mit Blick auf eine flexible Werkzeuggestaltung und kostensenkende Investitionen bietet sich ein modulares Systemwerkzeug an. Eine große Auswahl an Adaptern, Verlängerungen und Reduzierungen ermöglicht einen flexiblen Zusammenbau für eine optimale Leistung. The modular build up of the Microbore system allows maximum flexibility in combination with a cost down environment. A large variety of adapters, extensions and reducers allows the user to assemble the tool for an optimum performance.
06
00
00
SK (DIN 69871)
BT (MAS 403)
HSK (DIN 69893)
MF 80
MF 63
MF 50
MF 40
MF 32
REDUCER
EXTENSION
MF 80
MF 63
MF 50
MF 40
Ø36-Ø50
MF 32
Ø190-Ø1015
Ø135-Ø355
Ø105-Ø135
Ø75-Ø105
Ø50-Ø75
Ø28-Ø36
MF 25
TWINBORE
Ø215-Ø1015
Ø100-Ø245
Ø64-Ø100
Ø56-Ø64
Ø48-Ø56
TRIBORE
Modular - Mod-Flex - Systeme Modular - Mod-flex system
MF 25
Modular - Mod-Flex - Systeme Modular - Mod-flex system
Übersicht Adaptersystem Adapter system overview
07
NL
HSK-A Kegel DIN69893 HSK-A Taper DIN69893 Fig - 1
08
Form AD / B
Ø
MF Ø
MF Ø
Bezeichnung Designation HSK-A50-MF25-50 HSK-A50-MF32-50 HSK-A50-MF40-60 HSK-A50-MF50-70 HSK-A63-MF25-50 HSK-A63-MF32-50 HSK-A63-MF40-60 HSK-A63-MF50-70 HSK-A63-MF63-80 HSK-A63-MF80-80 HSK-A100-MF25-60 HSK-A100-MF32-60 HSK-A100-MF40-80 HSK-A100-MF50-80 HSK-A100-MF63-80 HSK-A100-MF80-90
L
L
Form AD / B
HSK DØ
NL
NL
L
Form AD
ISO Steilkegel DIN69871 ISO Taper DIN69871 Fig - 2
HSK DØ 50 50 50 50 63 63 63 63 63 63 100 100 100 100 100 100
BT Kegel DIN JIS 6339 (MAS 403) BT Taper DIN JIS 6339 (MAS 403) Fig - 3
MF Ø 25 32 40 50 25 32 40 50 63 80 25 32 40 50 63 80
NL
L
kg
Fig.
Id. No.
50 50 60 70 50 50 60 70 80 80 60 60 80 80 80 90
26 26 26 26 26 26 26 26 26 26 29 29 29 29 29 29
0,4 0,5 0,6 0,9 0,9 0,9 1,0 1,2 1,5 1,5 2,0 2,0 2,3 2,5 2,8 3,8
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
55511121 55511122 55511123 55511124 55511125 55511126 55511127 55511128 55511129 55511130 55511131 55511132 55511133 55511134 55511135 55511136
GID40M-MF25-50 GID40M-MF32-50 GID40M-MF40-50 GID40M-MF50-50 GID40M-MF63-90
25 32 40 50 63
50 50 50 50 90
19 19 27 27 70
1,0 1,0 1,1 1,2 1,5
2 2 2 2 2
55511221 55511222 55511223 55511224 55511225
GID50M-MF25-60 GID50M-MF32-60 GID50M-MF40-60 GID50M-MF50-60 GID50M-MF63-60 GID50M-MF80-70
25 32 40 50 63 80
60 60 60 60 60 70
27 31 31 36 36 46
1,6 1,8 1,8 2,0 2,2 2,5
2 2 2 2 2 2
55511231 55511226 55511227 55511228 55511229 55511230
GBT40M-MF25- 60 GBT40M-MF32- 60 GBT40M-MF40- 60 GBT40M-MF50- 60 GBT40M-MF63- 70
25 32 40 50 63
60 60 60 60 70
25 28 28 28 38
1,0 1,1 1,1 1,3 1,5
3 3 3 3 3
55511421 55511422 55511423 55511424 55511425
GBT50M-MF25-70 GBT50M-MF32- 70 GBT50M-MF40- 70 GBT50M-MF50- 70 GBT50M-MF63- 80 GBT50M-MF80-100
25 32 40 50 63 80
70 70 70 70 80 100
38 32 32 30 42 62
2,6 2,8 2,9 3,2 3,5 4,5
3 3 3 3 3 3
55511431 55511426 55511427 55511428 55511429 55511430
GID40M-… GID50M-… GID40M-…C GID50M-…C
= = = =
GBT40M-... GBT50M-...
= Steilkegel ISO40 / Taper ISO40 = Steilkegel ISO50 / Taper ISO50
Modular - Mod-Flex - Systeme Modular - Mod-flex system
Modular - Mod-Flex - Systeme Modular - Mod-flex system
Werkzeugaufnahmen Adapters
Steilkegel ISO40 DIN69871, AD/B / Taper ISO40 DIN69871, AD / B Steilkegel ISO50 DIN69871, AD/B / Taper ISO50 DIN69871, AD / B Steilkegel ISO40 DIN69871, B / Taper ISO40 DIN69871, B Steilkegel ISO50 DIN69871, B / Taper ISO50 DIN69871, B
00
Modular - Mod-Flex - Systeme Modular - Mod-flex system
Modular - Mod-Flex - Systeme Modular - Mod-flex system
Verlängerungen / Reduzierungen Extensions / Reducers Verlängerungen Extensions
MF
L
Bezeichnung Designation V-MF25-40 V-MF25-80 V-MF32-50 V-MF32-80 V-MF40-60 V-MF40-100 V-MF50-80 V-MF50-120 V-MF63-60 V-MF63-100 V-MF63-160 V-MF80-60 V-MF80-100 V-MF80-160
MF Ø 25 25 32 32 40 40 50 50 63 63 63 80 80 80
L
kg
Id. No.
40 80 50 80 60 100 80 120 60 100 160 60 100 160
0,2 0,4 0,8 1,0 0,6 0,8 1,2 1,6 1,5 2,0 2,8 2,3 3,8 6,2
55512121 55512122 55512123 55512124 55512134 55512125 55512126 55512127 55512128 55512129 55512130 55512131 55512132 55512133
Hinweise : Aufnahmen geeignet für Schlicht - und Schruppanwendungen Note : Attachments suitable for both rough and fine boring
Reduzierungen Reducers
MF2 MF1
L NL
Bezeichnung Designation R-MF32-25-30 R-MF40-25-40 R-MF40-32-40 R-MF50-25-40 R-MF50-40-40 R-MF63-40-60 R-MF63-50-60 R-MF80-50-60 R-MF80-63-60
00
MF1
Mf2
NL
L
kg
Id. No.
32 40 40 50 50 63 63 80 80
25 25 32 32 40 50 50 50 63
30 40 40 40 40 60 60 60 60
20 28 25 24 25 40 40 35 35
0,1 0,3 0,4 0,6 0,6 1,2 1,2 1,9 2,1
55513121 55513122 55513123 55513124 55513126 55513127 55513128 55513129 55513130
09
TWINBORE: Bohrköpfe / Schneidenträger TWINBORE: Boring heads / Insert holders Bohrbereiche Ø 28 - 355mm Boring ranges Ø 28 - 355mm
NL
EM
Ø BB
X
MF
Fig. 1
Fig. 1
NL
Schruppbohrsysteme Rough boring system
Schruppbohrsysteme Rough boring system
X
Ø BB
EM
10°
MF
Fig. 2 Fig. 2 X
Ø BB
NL
MF
Fig. 3
BB Ø
Bezeichnung Designation
Id. No.
MF
NL
X
28 - 36
MTP- 28-100-MF 25
55514121
25
100
26
1
0,3 MTP-28-1CC MTP-28-107CC MTP-28-107CC10
55516101 55516102 55516103
CC..-0602.. CC..-0602.. CC..-0602..
6 6 6
1 1 2
36 - 50
MTP- 36-100-MF 32
55514122
32
100
33
1
0,4 MTP-36-1CC MTP-36-107CC MTP-36-107CC10
55516201 55516202 55516203
CC..-0602.. CC..-0602.. CC..-0602..
6 6 6
1 1 2
50 - 75
MTP- 50-100-MF40
55514123
40
100
47
1
1,0 MTP-50-1CC MTP-50-107CC MTP-50-107CC10
55516301 55516302 55516303
CC..-09T3.. CC..-09T3.. CC..-09T3..
9 9 9
1 1 2
75 -105 MTP- 75-100-MF50 105-135 MTP-105-100-MF63
55514124 55514125
50 63
100 100
50 63
2 2
1,6 MTP-75-1CC 2,2 MTP-75-107CC MTP-75-107CC10
55516401 55516402 55516403
CC..-1204.. CC..-1204.. CC..-1204..
12 12 12
1 1 2
135-190 190-245 245-300 300-355
55514126 55514127 55514128 55514129
80 80 80 80
100 80 120 100 120 100 125 100
2 3 3 3
3,7 MTP-135-1CC 4,7 MTP-135-107CC 5,4 MTP-135-107CC10 9,0
55516511 55516512 55516513
CC..-1204.. CC..-1204.. CC..-1204..
12 12 12
1 1 1
MTP-135-100-MF80 MTP-190-120-MF80 MTP-245-120-MF80 MTP-300-125-MF80
Fig kg
Bezeichnung Designation
Id. No.
Wendeplatte EM Fig Insert
Bestellbeispiel / Example for ordering : Ø =100mm / L=200mm 1 GID50M-MF50-60 Werkzeugaufnahme / Adapter 1 V-MF50-80 Verlängerung / Extension 1 MTP- 75-100-MF 50 Bohrkopf / Boring head 2 MTP-75-1CC Schneidenträger / Insert holders 10 CCMT 120408 Wendeplatten / Inserts
10
00
TWINBORE: Schneidenträger TWINBORE: Insert holders
EM
Fig. 1
Schruppbohrsysteme Rough boring system
Schruppbohrsysteme Rough boring system
EM
10°
Fig. 2
EM
15°
Fig. 3
Bezeichnung Designation
Id. No.
Wendeplatte Insert
EM
Fig
Bezeichnung Designation
Id. No.
Wendeplatte Insert
EM
Fig
MTP-28-1TL MTP-28-107TL
55516104 55516105
TNM.-1103.. TNM.-1103..
11 11
1 1
MTP-28-1TC MTP-28-107TC MTP-28-1TC15
55516106 55516107 55516108
TC..-1102.. TC..-1102.. TC..-1102..
11 11 11
1 1 3
MTP-36-1TL MTP-36-107TL
55516204 55516205
TNM.-1103.. TNM.-1103..
11 11
1 1
MTP-36-1TC MTP-36-107TC MTP-36-1TC15
55516206 55516207 55516208
TC..-1102.. TC..-1102.. TC..-1102..
11 11 11
1 1 3
MTP-50-1TL MTP-50-107TL MTP-50-1VL
55516304 55516305 55516306
TNM.-1604.. TNM.-1604.. SNMM-0903..
16 16 9
1 1 2
MTP-50-1TC MTP-50-107TC MTP-50-1TC15 MTP-50-1SC10
55516307 55516308 55516309 55516310
TC..-16T3.. TC..-16T3.. TC..-16T3.. SC..-09T3..
16 16 16 9
1 1 3 2
MTP-75-1TL MTP-75-107TL MTP-75-1VL
55516404 55516405 55516406
TNM.-1604.. TNM.-1604.. SNMM-1204..
16 16 9
1 1 2
MTP-75-1TC MTP-75-107TC MTP-75-1TC15 MTP-75-1SC10
55516407 55516408 55516409 55516410
TC..-16T3.. TC..-16T3.. TC..-16T3.. SC..-1204..
16 16 16 12
1 1 3 2
MTP-135-1TL MTP-135-107TL MTP-135-1VL
55516501 55516502 55516503
TNM.-2204.. TNM.-2204.. SNMM-1906..
22 22 19
1 1 2
MTP-135-1TC MTP-135-107TC MTP-135-1TC15 MTP-135-1SC10
55516504 55516505 55516506 55516507
TC..-16T3.. TC..-16T3.. TC..-16T3.. SC..-1505..
16 16 16 15
1 1 3 2
Bestellbeispiel / Example for ordering Standardbohren zentrisch / Standard boring centric Stufenbohren exzentrisch / Step boring eccentric
00
: 2 MTP-36-1TC : 1 MTP-36-1TC 1 MTP-36-107TC
11
TRIBORE: Bohrköpfe / Schneidenträger TRIBORE: Boring heads / Insert holders Bohrbereiche Ø 48 - 245mm Boring ranges Ø 48 - 245mm
NL X*
Ø BB
EM
MF
Fig. 3
Schruppbohrsysteme Rough boring system
Schruppbohrsysteme Rough boring system
Fig. 1
NL X*
EM
Ø BB
10°
MF
Fig. 4 *= minØ
Fig. 2
BB Ø
Bezeichnung Designation
Id. No.
MF
NL
X
48 - 56
MDP-48-100-MF40
55515121
40
100
46
1
0,6 MTP-28-1CC MTP-28-107CC MTP-28-107CC10
55516101 55516102 55516103
CC..-0602.. CC..-0602.. CC..-0602..
6 6 6
3 3 4
56 - 64
MDP-56-100-MF32
55515122
50
100
54
1
0,9 MTP-28-1CC MTP-28-107CC MTP-28-107CC10
55516201 55516202 55516203
CC..-0602.. CC..-0602.. CC..-0602..
6 6 6
3 3 4
64 - 78
MDP-64-100-MF63
55515123
63
100
61
1
1,0 MTP-36-1CC MTP-36-107CC MTP-36-107CC10
55516301 55516302 55516303
CC..-0602.. CC..-0602.. CC..-0602..
6 6 6
3 3 4
78 -100 MDP-78-100-MF63 55515124 100-125 MDP-100-100-MF80 55515125
63 80
100 100
72 97
2 2
1,4 MTP-50-1CC 2,7 MTP-50-107CC MTP-50-107CC10
55516401 55516402 55516403
CC..-09T3.. CC..-09T3.. CC..-09T3..
9 9 9
3 3 4
125-155 155-185 185-215 215-245
80 80 80 80
100 100 100 100
118 148 178 208
2 2 2 2
3,7 MTP-75-1CC 4,5 MTP-75-107CC 5,1 MTP-75-107CC10 9,6
55516511 55516512 55516513
CC..-1204.. CC..-1204.. CC..-1204..
12 12 12
3 3 4
MDP-125-100-MF80 MDP-155-100-MF80 MDP-185-100-MF80 MDP-215-100-MF80
55515126 55515127 55515128 55515129
Fig kg
Bezeichnung Designation
Id. No.
Wendeplatte EM Fig Insert
Bestellbeispiel / Example for ordering : Ø =70mm / L=120mm 1 GID50M-MF63-60 Werkzeugaufnahme / Adapter 1 R-MF63-40-60 Reduzierung / Reducer 1 MDP- 48-100-MF40 Bohrkopf / Boring head 3 MTP-28-1CC Schneidenträger / Insert holders 10 CC..-0602.. Wendeplatten / Inserts
12
00
TRIBORE: Schneidenträger TRIBORE: Insert holders
EM
Fig. 1
Schruppbohrsysteme Rough boring system
Schruppbohrsysteme Rough boring system
EM
10°
Fig. 2
EM
15°
Fig. 3
Bezeichnung Designation
Id. No.
Wendeplatte Insert
EM
Fig
Bezeichnung Designation
Id. No.
Wendeplatte Insert
EM
Fig
MTP-28-1TL MTP-28-107TL
55516104 55516105
TNM.-1103.. TNM.-1103..
11 11
1 1
MTP-28-1TC MTP-28-107TC MTP-28-1TC15
55516106 55516107 55516108
TC..-1102.. TC..-1102.. TC..-1102..
11 11 11
1 1 3
MTP-28-1TL MTP-28-107TL
55516104 55516105
TNM.-1103.. TNM.-1103..
11 11
1 1
MTP-28-1TC MTP-28-107TC MTP-28-1TC15
55516106 55516107 55516108
TC..-1102.. TC..-1102.. TC..-1102..
11 11 11
1 1 3
MTP-36-1TL MTP-36-107TL
55516204 55516205
TNM.-1103.. TNM.-1103..
11 11
1 1
MTP-36-1TC MTP-36-107TC MTP-36-1TC15
55516206 55516207 55516208
TC..-1102.. TC..-1102.. TC..-1102..
11 11 11
1 1 3
MTP-50-1TL MTP-50-107TL MTP-50-1VL
55516304 55516305 55516306
TNM.-1604.. TNM.-1604.. SNMM-0903..
16 16 9
1 1 2
MTP-50-1TC MTP-50-107TC MTP-50-1TC15 MTP-50-1SC10
55516307 55516308 55516309 55516310
TC..-16T3.. TC..-16T3.. TC..-16T3.. SC..-09T3..
16 16 16 9
1 1 3 2
MTP-75-1TL MTP-75-107TL MTP-75-1VL
55516404 55516405 55516406
TNM.-1604.. TNM.-1604.. SNMM-1204..
16 16 12
1 1 2
MTP-75-1TC MTP-75-107TC MTP-75-1TC15 MTP-75-1SC10
55516407 55516408 55516409 55516410
TC..-16T3.. TC..-16T3.. TC..-16T3.. SC..-1204..
16 16 16 12
1 1 3 2
Bestellbeispiel / Example for ordering Standardbohren zentrisch / Standard boring centric Stufenbohren exzentrisch / Step boring eccentric
00
: 3 : 2 1
MTP-36-1TC MTP-36-1TC MTP-36-107TC
13
TWINBORE : Bohrköpfe Ø 190 - 1015mm TWINBORE : Boring heads Ø 190 - 1015mm Beschreibung / Description: TWINBORE Bohrwerkzeuge für große Bearbeitungsdurchmesser bedingen höhere Investitionskosten. Deshalb wurde ein Konzept entwickelt, solche Werkzeuge so zu gestalten, dass sie universell verwendet werden können. Beginnend ab Ø 355mm ist deshalb die Verwendung von Werkzeugkassetten vorgesehen. Dadurch wird es möglich, die Bohrköpfe für größere Bohrbereiche einzusetzen. Durch die Verwendung der jeweiligen Standard-Schneidenträger können diese Bohrköpfe auch als einschneidige Schlichtwerkzeuge eingesetzt werden, wobei der Vorteil der MICROBORE Werkzeuge genutzt wird.
Schruppbohrsysteme Rough boring system
Schruppbohrsysteme Rough boring system
Boring tools for large diameters require a higher capital investment. Therefore a concept was designed to allow such tooling to be used more universally. Starting at Ø 355mm the system allows the use of tooling cassettes to increase the boring capacity of the individual boring head. By using particular standard insert holders these boring heads can also be used as single point finishing tools, featuring the advantages of MICROBORE tooling.
1.
2. 3.
4.
5.
1. Werkzeugaufnahme DIN 2202 für Messerköpfe Adapter DIN2202 for milling cutters Menge / Quantity 1 2. TWINBORE Kopf / Head Menge / Quantity 1 3. Werkzeugkassette / Cassette MTP-355-25.02 Menge / Quantity 2 4. TWINBORE Schneidenträger / Insert holder Menge / Quantity 2 5.
Feinbohreinheiten / Fine boring unit Für Details s. Seite.33 / For details see page.33 Menge / Quantity 1
14
00
TRIBORE : Bohrköpfe Ø 190 - 1015mm TRIBORE : Boring heads Ø 190 - 1015mm Beschreibung / Description : TRIBORE Für TRIBORE gilt die selbe techn Konzeption. Beide Werkzeugsysteme gehören zur Familie der Schruppwerkzeuge. Hierbei wird der Vorteil der Austauschbarkeit einzelner Elemente, d.h. Werkzeugaufnahmen, Werkzeugkassetten und Schneidenträger besonders deutlich.
Schruppbohrsysteme Rough boring system
Schruppbohrsysteme Rough boring system
For TRIBORE 3-blade heads, the same technical concept is applied, as both systems belong to the family of roughing tools. The advantage of the interchangeability of individual components, i.e. adapters, cassettes and insert holders becomes very clear in application.
1.
2.
3. 4. 5.
1. Werkzeugaufnahme DIN 2202 für Messerköpfe Adapter DIN2202 for milling cutters Menge / Quantity 1
2. TRIBORE Kopf / Head Menge / Quantity 1
3. Werkzeugkassette / Cassette MTP-355-25.02 Menge / Quantity 3
4. TRIBORE Schneidenträger / Insert holder Menge / Quantity 3
5.
Feinbohreinheiten / Fine boring unit Für Details s. Seite.33 / For details see page.33 Menge / Quantity 1
15
TWINBORE / TRIBORE : Bohrköpfe Ø 190 - 1015mm TWINBORE / TRIBORE : Boring heads Ø 190 - 1015mm Bohrbereiche Ø 190 - 1015mm Boring ranges Ø 190 - 1015mm NL X X
Fig. 1
X
Schruppbohrsysteme Rough boring system
Schruppbohrsysteme Rough boring system
Ø 190
Ø BB
Ø BB
NL
Fig. 3
NL NL
Ø BB
Ø BB
X
Fig. 4
Fig. 2
TWINBORE Bohrköpfe / Boring heads BB Ø 190- 245 245- 300 300- 355 355- 520 520- 685 685- 850 850-1015
Bezeichnung Designation MTP-190-120 MTP-245-120 MTP-300-125 MTP-355-160* MTP-520-160* MTP-685-160* MTP-850-160* *Aluminium
Id. No. 55514401 55514402 55514403 55514404 55514405 55514406 55514407
Werkzeugkassette Cassette
MTP-355-25.02** MTP-355-25.02** MTP-355-25.02** MTP-355-25.02**
NL
X
Fig
Kg
120 120 125 160 160 160 160
130 130 130 140 140 140 140
1 1 1 2 2 2 2
7,6 8,3 9,5 18,8 23,3 28,0 32,1
NL
X
Fig
Kg
100 100 100 160 160 185 185
190 217 265 309 457 595 738
3 3 3 4 4 4 4
9,4 13,1 19,6 22,8 30,7 38,5 47,7
TRIBORE Bohrköpfe / Boring heads BB Ø 215- 245 245- 300 300- 355 355- 520 520- 685 685- 850 850-1015
Bezeichnung Designation MDP-215-100 MDP-245-100 MDP-300-100 MDP-355-160* MDP-520-160* MDP-685-185* MDP-850-185* * Aluminium
Id. No. 55515401 55515402 55515403 55515404 55515405 55515406 55515407
Werkzeugkassette Cassette
MTP-355-25.02** MTP-355-25.02** MTP-355-25.02** MTP-355-25.02**
** MTP-355-25.02 (cassette)- only for aluminum boring heads, please refer page 14-15. Id. No. is 55517101.
16
00
Werkzeugaufnahmen / Schneidenträger Adapters / Insert holders Werkzeugaufnahmen DIN2202 Adapters DIN2202 L
Bezeichnung Designation WSMH/60-70/SK50 WSMH/60-80/BT50 WSMH/60-70/HSK-A100
Id. No. 66631162M 66631194M 66661339M
Ø2
Schaft Shank ISO50 DIN69871, AD BT50, MAS 403 BT HSK-A, DIN69893
Ø1
Ø2
NL
L
kg
60 60 60
129 129 129
70 80 70
40 40 40
4,8 8,5 6,0
Schruppbohrsysteme Rough boring system
Schruppbohrsysteme Rough boring system
Ø1
45°
NL
Schneidenträger Insert holders EM
EM
EM
10°
10°
Fig. 1
Fig. 3
EM
Fig. 5
EM
EM
15°
Fig. 2
Bezeichnung Designation Id. No. MTP-135-1TL 55516501 MTP-135-107TL 55516502 MTP-135-1VL 55516503
Wendeplatte EM Fig Insert
TNM.-2204..
22
1
TNM.-2204..
22
1
SNMM-1906.. 19
3
MTP-135-1CC CC.-1204.. 55516511 MTP-135-107CC CC.-1204.. 55516512 MTP-135-107CC10 CC.-1204.. 55516513
00
Fig. 4
12
4
12
4
12
5
Bezeichnung Designation Id. No. MTP-135-1TC 55516504 MTP-135-107TC 55516505 MTP-135-1TC15 55516506 MTP-135-1SC10 55516507
Fig. 6
Wendeplatte EM Fig Insert
TC..-16T3..
16
1
TC..-16T3..
16
1
TC..-16T3..
16
2
SC..-1505..
15
3
Bezeichnung Designation Id. No. MTP-135-1WC 55516523 MTP-135-107WC 55516524
Bestellbeispiele / Examples for ordering
Bestellbeispiele / Examples for ordering
TWINBORE Ø=400mm / L=200mm
TRIBORE Ø=400mm / L=200mm
1 1 2 2 10
1 1 2 2 10
GID50M-MA60-70 MTP-355-160 MTP-355-25.02 MTP-135-1TC TCMT-16T304-K10
Werkzeugaufnahme / Adapter Bohrkopf / Boring head Werkzeugkassetten / Cassettes Schneidenträger / Insert holders Wendeplatten / Inserts
GID50M-MA60-70 MDP-355-160 MTP-355-25.02 MTP-135-1TC TCMT-16T304-K10
Wendeplatte EM Fig Insert
WC..-0804..
8
6
WC..-0804..
8
6
Werkzeugaufnahme / Adapter Bohrkopf / Boring head Werkzeugkassetten / Cassettes Schneidenträger / Insert holders Wendeplatten / Inserts
17
TWINBORE / TRIBORE : Ersatzteile TWINBORE / TRIBORE : Spares
Befestigungsschraube Clamping screw
ISS-Schlüssel Hexagon wrench
Schruppbohrsysteme Rough boring system
Schruppbohrsysteme Rough boring system
Schlüssel Wrench
Spannbolzen Locking pin
Schneidenhalter
Schneidenhalter
Schneidenhalter
Insert Holder
Insert Holder
Insert Holder
MTP-28-1CC
MTP-28-107CC
MTP-28-1TL MTP-28-1TC MTP-36-1CC MTP-36-1TL MTP-36-1TC MTP-50-1CC MTP-50-1TL MTP-50-1VL MTP-50-1TC MTP-50-1SC10 MTP-50-1SV10 MTP-75-1CC MTP-75-1TL MTP-75-1VL MTP-75-1TC MTP-75-1SC10 MTP-135-1CC MTP-135-1TL MTP-135-1VL MTP-135-1TC MTP-135-1SC10
MTP-28-107TL MTP-28-107TC MTP-36-107CC MTP-36-107TL MTP-36-107TC MTP-50-107CC MTP-50-107TL
Befestigungsschraube Clamping screw
Spannbolzen
Schlüssel
Locking pin
Wrench
Id. No.
Id. No.
Id. No.
MTP-28-107CC10
C02506
MTP-28-1TC15 MTP-36-107CC10
5513-020-03 C02506
MTP-36-1TC15 MTP-50-107CC10
5513-020-03 C04008
NLMS-6,35 / 23
SKSS 1,5 TX - 7
NLMS-6,35 / 23
SKSS 1,5 TX - 7
NLMS-9,525 / 33 NLM -9,525
MTP-50-107TC
MTP-50-1TC15
MTP-75-107CC MTP-75-107TL
MTP-75-107CC10
MTP-75-107TC
MTP-75-1TC15
MTP-135-107CC MTP-135-107TL
MTP-135-1CC10
MTP-135-107TC
MTP-135-1TC15
5513-020-01 5513-020-01 D4010 C05012
SKSS 2 SKSS 2 TX -15 TX -15 G02
NLML-9,525/34L NLM -12,7 / 46 5513-020-01 5513-020-17 C05012
SKSS 2 SKSS 2,5 TX -15 TX -15
NLM -12,7 / 46 NLM -19,05 / 68 5513-020-01 214.80.073
ISSSchlüssel Hexagon wrench Id. No.
SKSS 2,5 SKSS 3 TX -15 TX -15
Hinweis / Note: kein Eintrag = nicht erforderlich; no listing = not required
18
00
TWINBORE / TRIBORE : Ersatzteile TWINBORE / TRIBORE : Spares
Verstellschraube Adjustment screw
Befestigungsschraube Clamp screw
Schruppbohrsysteme Rough boring system
Auflageplatte Shim Schraube f. Auflageplatte Shim screw
Schneidenhalter
Schneidenhalter
Schneidenhalter
Auflageplatte
Schraube f. Auflageplatte
Verstellschraube
Federscheibe
B.schraube
Insert Holder
Insert Holder
Insert Holder
Shim
Shim screw
Id. No.
Id. No.
Adjustment screw Id. No.
Spring washer Id. No.
Clampscrew Id. No.
MTP-28-1CC MTP-28-1TL MTP-28-1TC MTP-36-1CC MTP-36-1TL MTP-36-1TC MTP-50-1CC MTP-50-1TL MTP-50-1VL MTP-50-1TC MTP-50-1SC10 MTP-50-1SV10 MTP-75-1CC MTP-75-1TL MTP-75-1VL MTP-75-1TC MTP-75-1SC10 MTP-135-1CC MTP-135-1TL MTP-135-1VL MTP-135-1TC MTP-135-1SC10
MTP-28-107CC MTP-28-107TL MTP-28-107TC MTP-36-107CC MTP-36-107TL MTP-36-107TC MTP-50-107CC MTP-50-107TL
MTP-28-107CC10
MTP-28-2 MTP-28-2 MTP-28-2 MTP-28-2 MTP-28-2 MTP-28-2 MTP-50-2 MTP-50-2 MTP-50-2 MTP-50-2 MTP-50-2 MTP-50-2 MTP-50-2 MTP-50-2 MTP-50-2 MTP-50-2 MTP-50-2 MTP-135-2 MTP-135-2 MTP-135-2 MTP-135-2 MTP-135-2
MTP-28-15 MTP-28-15 MTP-28-15 MTP-36-15 MTP-36-15 MTP-36-15 MTP-50-15 MTP-50-15 MTP-50-15 MTP-50-15 MTP-50-15 MTP-50-15 MTP-75-15 MTP-75-15 MTP-75-15 MTP-75-15 MTP-75-15 MTP-135-15 MTP-135-15 MTP-135-15 MTP-135-15 MTP-135-15
M5x20 M5x20 M5x20 M6x20 M6x20 M6x20 M8x25 M8x25 M8x25 M8x25 M8x25 M8x25 M8x25 M8x25 M8x25 M8x25 M8x25 M12x40 M12x40 M12x40 M12x40 M12x40
MTP-28-1TC15 MTP-36-107CC10 MTP-36-1TC15 MTP-50-107CC10 SSN-090308
MTP-50-107TC
MTP-50-1TC15
MTP-75-107CC MTP-75-107TL
MTP-75-107CC10
MTP-75-107TC
MTP-75-1TC15
MTP-135-107CC MTP-135-1CC10 MTP-135-107TL
123.19-621 TSN-160308 SSN-120408
CA5008
123.19-621 TSN-220408 SSN-190408
CA5008
MTP-135-107TC MTP-135-1TC15
Schruppbohrsysteme Rough boring system
Federscheibe Spring washer
Hinweis / Note: kein Eintrag = nicht erforderlich; no listing = not required
00
19
Feinbohrsysteme Fine boring system
Systembeschreibungen
22 - 23
System description
GA
: Feinbohrköpfe / Feinbohreinheiten
24 - 25
Fine boring head / Cartridges
GA / MB : Feinbohrköpfe / Feinbohreinheiten
26 - 27
Fine boring head / Cartridges
MB
: Feinbohrköpfe / Feinbohreinheiten
28 - 29
Fine boring head / Cartridges
GA
: Feinbohrstangen / Feinbohreinheiten
30 - 31
Fine boring bars / Cartridges
GA Zylinderschaftbohrstangen
32
Straight shank GA boring bars
MTP GA Feinbohrwerkzeugaufnahmen
33
MTP GA Fine boring tool holders
GA: SFB Frontbuchsen
34 - 35
GA: SFB Front bushings
MB: C Typ Frontbuchsen
36 - 37
MB: C Type Front bushings
GA Microbore: Handhabung
38 - 39
GA Microbore: Handling
00
21
MICROBORE GA Werzeugsysteme MICROBORE GA Tooling systems
Microbore GA Werkzeuge können im Handumdrehen präzise eingestellt werden
Distanzring Washer
Schnecke Worm
Feinbohrsysteme Fine boring system
Feinbohrsysteme Fine boring system
With a twist of the wrist you can precisely adjust Microbore ‘GA’ tooling on your machines.....in seconds
Einheit Unit
Skalenkonus Graduated dial
Schneckenrad Worm wheel
Anzugsschraube Locking screw Sprengring Circlip Federscheiben Springs Gegenhalltering Washer
einzigartige Verstelltechnik durch Schnecke/Schneckenrad P P Bohrdurchmesser per Konusdrehung um einen Teilstrich in 2µm-
Schritten einstellbar P Schnell und exakt P Schnellere Einstellungen an und abseits der Maschine P Reduzierte Rüstzeiten auch unter ungünstigen Zugriffsbedingungen P Unique adjustment through worm and gear arrangement P Adjust within 2 microns on Ø per division on key dial P Fast and accurate P Speeds up “on the machine’ or preset adjustments P Reduces downtime in ‘hard to reach’ areas
22
00
SK (DIN 69871)
BT (MAS 403)
HSK (DIN 69893)
MF 80
MF 63
MF 50
MF 40
MF 32
MF 25
REDUCER
EXTENSION
MF 80
MF 63
MF 50
MF 40
MF 32
MF 25
Ø229-Ø382.5
Ø93-Ø229.5
Ø67-Ø93
Ø46-Ø67
Ø36-Ø46
Ø23-Ø36
Feinbohrsysteme Fine boring system
00 GA BORING HEAD
Feinbohrsysteme Fine boring system
Ø237-Ø390
Ø90-Ø245
Ø65-Ø90
Ø46-Ø66
Ø37-Ø48
Ø21-Ø38
MB BORING HEAD
Ø12-Ø37
Ø8-Ø26
MGAG BORING HEAD
Übersicht modulares Adaptersystem Modular adapter system overview
23
GA: Feinbohrköpfe GA: Fine boring heads Bohrbereiche Ø 8 - 37mm Boring ranges Ø 8 - 37mm
Ø
- +
Hub / Range
KD
MF NL
Bezeichnung Designation MGAG-05-MF50
Id. No.
KD
MF
NL
Ø 10
Hub Range 1.5 = Ø3
55522111
57
50
50
8 - 37
MGAG-07-MF63
55522112
76
63
60
kg 1,3
16
2.5 = Ø5
1,6
Verstellschlüssel Adjustment-Wrench MGAG - 05**
MGAG - 05**
Feinbohrsysteme Fine boring system
Feinbohrsysteme Fine boring system
BB Ø 8 - 26
Bohrbereiche Ø 23 - 229,5mm Boring ranges Ø 23 - 229,5mm NL
X NL X
+ -
Ø BB
Ø BB
MF MOD-FLEX
Fig. 1 BB Ø 23,0 - 27,5 27,0 - 36,0 36,0 - 46,0 46,0 - 53,5 53,0 - 67,0 67,0 - 93,0 93,0 -134,5 134,0 - 172,5 172,0 - 210,5 210,0 - 229,5*
24
Bezeichnung Designation GA- 23A-60-MF25 GA- 27A-60-MF25 GA- 36A-60-MF32 GA- 46A-60-MF40 GA- 53A-60-MF40 GA- 67A-60-MF50 GA- 93A-60-MF63 GA-131A-60-MF63 GA-169A-60-MF63 GA-188A-60-MF63
Fig. 2 Id. No.
MF
NL
X
55522221 55522222 55522223 55522224 55522225 55522226 55522227 55522228 55522229 55522230
25 25 32 40 40 50 63 63 63 63
60 60 60 60 60 60 60 60 60 60
25/20* 25 32 40 40 50 63 65 65 65
Hinweise : mit innerer Kühlschmierstoffzufuhr, * mit Sonder-MICROBORE-Einheit ab Ø190mm möglich Note : with bores for internal coolant supply, * with special MICROBORE unit possible from Ø190mm
Fig
kg
1 1 1 1 1 1 1 2 2 2
0,3 0,3 0,4 0,6 0,6 1,1 1,8 2,4 2,6 3,5
Verstellschlüssel Adjustment-Wrench MGAG-03** MGAG-03** MGAG-03** MGAG-05** MGAG-05** MGAG-05** MGAG-05** MGAG-05** MGAG-05** MGAG-05**
* abgestuft auf 50 mm / step on 50mm ** Id. No. for MGAG-03 - 55439001, MGAG-05 - 55439002
00
GA: Feinbohrstangen / Feinbohreinheiten GA: Fine boring bars / Fine boring units
Ø
GL
GL BL
Ø BB
EM
BL
BL EM Ø BB
Ø
Ø Ø BB
GL
Fig. 1
Fig. 2
Fig. 3
GL
GL BL
BL EM Ø BB
Ø
EM
Ø
Fig. 4
Bezeichnung Designation
Fig. 5
Id. No.
Ø
BL
GL
Fig
Wendeplatte Insert
EM
8 - 11 11 - 14 14 - 17 17 - 20 20 - 23 23 - 26
ASH10-08-02T06 ASH10-11-03T06 ASH10-14-03 ASH10-17-03 ASH10-20-03 ASH10-23-03
55524201 55524202 55524203 55524204 55524205 55524206
10 10 10 10 10 10
29 42 52 52 52 52
52 65 75 75 75 75
4 4 4 4 4 4
TCMT-06T102L TCMT-06T102L TC..-1102.. TC..-1102.. TC..-1102.. TC..-1102..
6 6 11 11 11 11
8 - 13 12 - 17 17 - 22 22 - 27 27 - 32 32 - 37 12 - 17 17 - 22 22 - 27 27 - 32 32 - 37
ASH16-08-03T06 AS16-12-03T06 AS16-17-03 AS16-22-03 AS16-27-03 AS16-32-03 ASH16-12-03T06 ASH16-17-03 ASH16-22-03 ASH16-27-03 ASH16-32-03
55524207 55524104 55524105 55524106 55524107 55524108 55524208 55524209 55524210 55524211 55524212
16 16 16 16 16 16 16 16 16 16 16
29 45 62 62 62 62 77 107 107 107 107
62 78 95 95 95 95 110 140 140 140 140
5 2 3 3 3 3 5 5 5 5 5
TCMT-06T102L TCMT-06T102L TC..-1102.. TC..-1102.. TC..-1102.. TC..-1102.. TCMT-06T102L TC..-1102.. TC..-1102.. TC..-1102.. TC..-1102..
6 6 11 11 11 11 6 11 11 11 11
Feinbohrsysteme Fine boring system
Feinbohrsysteme Fine boring system
BB Ø
Ø BB
Hinweise: Die Schafte der Typen ASH sind aus Vollhartmetall. Anstellwinkel 3° Note: The shanks of styles ASH are in solid carbide. Lead angle 3°
GA: Feinbohreinheiten GA: Fine boring units
EM
EM
3°
3°
Fig. 1
Feinbohreinheiten Fine Boring Units M022-BS095T06-50GA M022-0L095T06-50GA M032-0L095T06-50GA M052-BS095TC-50GA M052-1L095TC-50GA M052-0L095TC-50GA M072-0L095TC-100GA M072-0L095TC-100GA M072-0L095TC-100GA M072-0L095TC-100GA
Fig. 2
Id. No.
Fig.
55525101 55525102 55525201 55525301 55525302 55525303 55525401 55525401 55525401 55525401
1 1 1 2 2 2 2 2 2 2
Hinweise : MICROBORE Einheiten müssen separat bestellt werden Note : MICROBORE units must be ordered separately
00
Wendeplatte Insert TCMT-06T102L TCMT-06T102L TCMT-06T102L TC.. - 1102.. TC.. - 1102.. TC.. - 1102.. TC.. - 1102.. TC.. - 1102.. TC.. - 1102.. TC.. - 1102..
Fig. 3
EM 6 6 6 11 11 11 11 11 11 11
Verstellschlüssel Adjustment - Wrench MGAG-03** MGAG-03** MGAG-03** MGAG-05** MGAG-05** MGAG-05** MGAG-05** MGAG-05** MGAG-05** MGAG-05**
** Id.No. for MGAG-03 - 55439001, MGAG-05 - 55439002
25
GA / MB: Feinbohrköpfe GA / MB: Fine boring heads Bohrbereiche Ø 229 - 390mm Boring ranges Ø 229 - 390mm NL
15° NL
+ -
Ø BB
Pos. 1
98
MOD - FLEX
Pos. 2
Fig. 1
Fig. 2
abgeflacht auf 105 Flat to 105
NL
Feinbohrsysteme Fine boring system
Feinbohrsysteme Fine boring system
15° NL Ø BB
Pos. 1
98
MOD - FLEX
Fig. 1
Pos. 2
Fig. 3
Bezeichnung Designation
R-MF80-ADE3280-40
Id. No.
55513211
Fig
1
NL
40
MF
abgeflacht auf 105 Flat to 105
BB Ø 229-268.5 267-306.5 306-344.5 344-382.5
Bezeichnung Designation GA207A-100-ADE32 GA245A-100-ADE32 GA283A-100-ADE32 GA321A-100-ADE32
Id. No.
Fig
NL
kg*
55522701 55522702 55522703 55522704
2 2 2 2
100 100 100 100
6,0 6,7 7,4 8,1
237-276 275-314 313-352 351-390
MB215A-100-ADE32 MB253A-100-ADE32 MB291A-100-ADE32 MB329A-100-ADE32
55522801 55522802 55522803 55522804
3 3 3 3
100 100 100 100
6,0 6,7 7,4 8,1
80
Hinweise : Die Aufnahmebuchsen der GA-MICROBORE und MICROBORE Feinbohreinheiten sind in den Positionen 1 und 2 umsteckbar; dadurch werden die Bohrbereiche der Feinbohrköpfe wesentlich erweitert. Alle Werkzeuge sind mit innerer Kühlschmierstoffzuführung versehen. Note
26
: The bushings for the adaptation of GA-MICROBORE and MICROBORE Fine boring units may be located in positions 1 and 2 in order to increase the boring ranges of the individual fine boring heads considerably. All tools are equipped with bores for internal coolant supply.
00
GA / MB: Feinbohreinheiten GA / MB: Fine boring units
EM
EM
3° 3°
Fig. 2
Feinbohrsysteme Fine boring system
Feinbohrsysteme Fine boring system
Fig. 1
Fig. 3
Fig. 4
Bezeichnung Designation M072-0L095TC-100GA M072-0L095TC-100GA M072-0L095TC-100GA M072-0L095TC-100GA
Id. No.
Fig
EM
1 1 1 1
Wendeplatte Insert TC..-1102.. TC..-1102.. TC..-1102.. TC..-1102..
55525401 55525401 55525401 55525401
M072-0L095TC-100 M072-0L095TC-100 M072-0L095TC-100 M072-0L095TC-100
55525402 55525402 55525402 55525402
2 2 2 2
TC..-1102.. TC..-1102.. TC..-1102.. TC..-1102..
Hinweise : MICROBORE Einheiten müssen separat bestellt werden. Note : MICROBORE units must be ordered separately.
00
Fig
11 11 11 11
Verstellschlüssel Adjustment-Wrench MGAG-05* MGAG-05* MGAG-05* MGAG-05*
11 11 11 11
DS7-10* DS7-10* DS7-10* DS7-10*
4 4 4 4
3 3 3 3
* Id.No. for MGAG-05 - 55439002, DS7-10 - 55439006
27
MB: Feinbohrköpfe MB: Fine boring heads Bohrbereiche Ø 21 - 245mm Boring ranges Ø 21 - 245mm
NL
X
Ø BB
MOD - FLEX
Fig. 1
NL
Ø BB
MOD - FLEX
Fig. 2
BB Ø
Bezeichnung Designation
Id. No.
Fig.
MF
NL
X
kg
Verstellschlüssel Adjustment-Wrench
Id. No.
21 - 29 28 - 38 37 - 48 46 - 66 65 - 90 90 - 136 118 - 164 147 - 193 169 - 215 199 - 245
MB 21B-60MF25 MB 28B-60MF 25 MB 37B-60MF 32 MB 46B-60MF40 MB 65B-60MF50 MB 88A-60MF63 MB 115A-60MF63 MB 142A-60MF63 MB 169A-60MF63 MB 196A-60MF63
55522421 55522422 55522423 55522424 55522425 55522426 55522427 55522428 55522429 55522430
1 1 1 1 1 2 2 2 2 2
25 25 32 40 50 63 63 63 63 63
60* 60* 60* 60* 60* 60 60 60 60 60
25/20** 25 32 40 50 63 63 63 63 63
0,3 0,3 0,4 0,7 1,1 1,8 2,0 2,6 3,3 3,8
DS-2 DS-3 DS-5 DS-5 DS-7/10 DS-7/10 DS-7/10 DS-7/10 DS-7/10 DS-7/10
55439003 55439004 55439005 55439005 55439006 55439006 55439006 55439006 55439006 55439006
Hinweise : Alle Werkzeuge sind mit innerer Kühlschmierstoffzufuhr versehen Note : All tools are equipped with bores for internal coolant supply
28
Feinbohrsysteme Fine boring system
Feinbohrsysteme Fine boring system
X
* bei kleinstem Ø / on smallest Ø ** abgestuft auf 50 mm / Step on 50 mm
00
MB: Feinbohreinheiten MB: Fine boring units
EM
EM
EM
* Fig. 1
Fig. 2
Fig. 3
EM
3°
EM
Fig. 4
Feinbohrsysteme Fine boring system
Feinbohrsysteme Fine boring system
** Fig. 5
Hinweis: EP Wendeplatten nur solange der Vorrat reicht Note : EP style inserts while stocks last (Gelötet / brazed) ISO-Wendeplatten / Insert
Bezeichnung Designation
Id. No.
Wendeplatte Insert
EM
Fig.
M2A2E04-40S M3A2C06-40S M5B2C06-40S M5B2C06-40S M7A2C09-80S
55526201 55526301 55526501 55526501 55526701
EP.. - 0401.. CC.. - 0602.. CC..- 0602.. CC..- 0602.. CC..- 09T3..
4 6 6 6 9
1 3 3 3 3
Bezeichnung Designation
Id. No.
Wendeplatte Insert
EM
Fig.
M5B2TC-40S M5A2TC-40S M7A2TC-80S M072-0L095TC-100 M072-0L095TC-100 M072-0L095TC-100 M072-0L095TC-100 M072-0L095TC-100
55526502 55526505 55526702 55525402 55525402 55525402 55525402 55525402
TC..-1102.. TC..-1102.. TC..-1102.. TC..-1102.. TC..-1102.. TC..-1102.. TC..-1102.. TC..-1102..
11 11 11 11 11 11 11 11
2 2 4 5 5 5 5 5
Hinweise : MICROBORE Einheiten mit gelöteten Hartmetallschneiden sind in Sorten für die Bearbeitung von Grauguß, Stahl und Nichteisenmetallen lieferbar. Im Bestellfall bitte die gewünschte Sorte angeben. Siehe Kennziffer der Bestell-Nr. MICROBORE Einheiten müssen separat bestellt werden. Note
00
: MICROBORE units with brazed carbide tips are available in grades for the machining of cast iron, steel and non-ferrous materials. When ordering please specify carbide grade required. See mark in Order no. MICROBORE units must be ordered separately.
29
GA: Feinbohrstangen GA: Fine boring bars Bohrbereiche Ø 23 - 134,5mm Boring ranges Ø 23 - 134,5mm
NL BL
+ -
Ø BB
+ -
Ø BB
SK (DIN 69871)
NL BL
BB Ø
Bezeichnung Designation
Id. No.
BL
NL
kg
23- 27,5 23- 27,5 27- 36,0 27- 36,0 36- 46,0 36- 46,0 46- 53,5 46- 53,5 53- 67,0 53- 67,0 67- 93,0 67- 93,0 93-134,5 93-134,5 23- 27,5 23- 27,5 27- 36,0 27- 36,0 36- 46,0 36- 46,0 46- 53,5 46- 53,5 53- 67,0 53- 67,0 67- 93,0 67- 93,0 93-134,5 93-134,5
GID40M-GA23A-130 GID50M-GA23A-130 GID40M-GA27A-130 GID50M-GA27A-130 GID40M-GA36A-150 GID50M-GA36A-150 GID40M-GA46A-160 GID50M-GA46A-160 GID40M-GA53A-160 GID50M-GA53A-160 GID40M-GA67A-180 GID50M-GA67A-180 GID40M-GA93A-140 GID50M-GA93A-180 GBT40M-GA23A-130 GBT50M-GA23A-130 GBT40M-GA27A-130 GBT50M-GA27A-130 GBT40M-GA36A-150 GBT50M-GA36A-150 GBT40M-GA46A-160 GBT50M-GA46A-160 GBT40M-GA53A-160 GBT50M-GA53A-160 GBT40M-GA67A-180 GBT50M-GA67A-180 GBT40M-GA93A-140 GBT40M-GA93A-140
55521101 55521108 55521102 55521109 55521103 55521110 55521104 55521111 55521105 55521112 55521106 55521113 55521107 55521114 55521301 55521307 55521302 55521308 55521303 55521309 55521304 55521310 55521305 55521311 55521306 55521312 55521313 55521314
108 108 108 108 128 128 138 138 138 138 158 158 105 158 104 104 104 104 117 117 127 127 127 127 147 147 097 097
130 130 130 130 150 150 160 160 160 160 180 180 140 180 130 130 130 130 150 150 160 160 160 160 180 180 140 140
1,2 3,1 1,3 3,2 1,7 3,6 2,3 4,2 2,3 4,2 3,4 5,3 3,4 6,4 1,2 3,1 1,3 3,2 1,7 3,6 2,3 4,2 2,3 4,2 3,4 5,3 3,4 3,4
Hinweise / Note :
30
Feinbohrsysteme Fine boring system
Feinbohrsysteme Fine boring system
MAS 403 BT
GID40M-… = Steilkegel / Taper ISO40; GID50M-… = Steilkegel / Taper ISO50, DIN69871, AD
00
GA: Feinbohreinheiten GA: Fine boring units
EM
EM
3°
3°
Bezeichnung Designation M022-BS095T06-50-GA M022-BS095T06-50-GA M022-0L095T06-50-GA M022-0L095T06-50-GA M032-0L095T06-50-GA M032-0L095T06-50-GA M052-BS095TC-50-GA M052-BS095TC-50-GA M052- 1L095TC-50-GA M052- 1L095TC-50-GA M052- OL095TC-50-GA M052- OL095TC-50-GA M072-0L095TC-100-GA M072-0L095TC-100-GA M022-BS095T06-50-GA M022-BS095T06-50-GA M022-0L095T06-50-GA M022-0L095T06-50-GA M032-0L095T06-50-GA M032-0L095T06-50-GA M052-BS095TC-50-GA M052-BS095TC-50-GA M052- 1L095TC-50-GA M052- 1L095TC-50-GA M052- OL095TC-50-GA M052- OL095TC-50-GA M072-0L095TC-100-GA M072-0L095TC-100-GA
M052... M072...
Id. No.
Wendeplatte Insert
EM
Schlüssel Wrench
Id. No.
55525101 55525101 55525102 55525102 55525201 55525201 55525301 55525301 55525302 55525302 55525303 55525303 55525401 55525401 55525101 55525101 55525102 55525102 55525201 55525201 55525301 55525301 55525302 55525302 55525303 55525303 55525401 55525401
TCMT-06T102L TCMT-06T102L TCMT-06T102L TCMT-06T102L TCMT-06T102L TCMT-06T102L TC..-1102.. TC..-1102.. TC..-1102.. TC..-1102.. TC..-1102.. TC..-1102.. TC..-1102.. TC..-1102.. TCMT-06T102L TCMT-06T102L TCMT-06T102L TCMT-06T102L TCMT-06T102L TCMT-06T102L TC..-1102.. TC..-1102.. TC..-1102.. TC..-1102.. TC..-1102.. TC..-1102.. TC..-1102.. TC..-1102..
6 6 6 6 6 6 11 11 11 11 11 11 11 11 6 6 6 6 6 6 11 11 11 11 11 11 11 11
MGAG-03 MGAG-03 MGAG-03 MGAG-03 MGAG-03 MGAG-03 MGAG-05 MGAG-05 MGAG-05 MGAG-05 MGAG-05 MGAG-05 MGAG-05 MGAG-05 MGAG-03 MGAG-03 MGAG-03 MGAG-03 MGAG-03 MGAG-03 MGAG-05 MGAG-05 MGAG-05 MGAG-05 MGAG-05 MGAG-05 MGAG-05 MGAG-05
55439001 55439001 55439001 55439001 55439001 55439001 55439002 55439002 55439002 55439002 55439002 55439002 55439002 55439002 55439001 55439001 55439001 55439001 55439001 55439001 55439002 55439002 55439002 55439002 55439002 55439002 55439002 55439002
Feinbohrsysteme Fine boring system
Feinbohrsysteme Fine boring system
M022... M032...
Hinweise : MICROBORE Einheiten müssen separat bestellt werden Note : MICROBORE units must be ordered separately
00
31
Microbore GA Zylinderschaftbohrstangen Microbore straight shank GA boring bars Bohrbereiche Ø 23 - 134,5mm Boring ranges Ø 23 - 134,5mm
B
ØA
ØD
E
Bezeichnung Designation
Id. No.
MSS20-23GA-180 MSS25-27GA-180 MSS25-36GA-180 MSS32-46GA-210 MSS32-53GA-210
55523501 55523502 55523503 55523504 55523505
A BB Ø 23.0 27.0 36.0 46.0 53.0 -
B Kopflänge Headlength 27.5 36.0 46.0 53.5 67.0
40.0 50.0 50.0
E Min
D Schaft Shank Ø
L Länge Length
0.5 0.5 0.5 0.5 0.5
20.0 25.0 25.0 32.0 32.0
180.0 180.0 180.0 210.0 210.0
Bohreinheit Catridge Unit M022-BS095T06-50GA* M022-0L095T06-50GA* M032-0L095T06-50GA* M052-BS095TC-50GA** M052-1L095TC-50GA**
Id. No.
55525101 55525102 55525201 55525301 55525302
Feinbohrsysteme Fine boring system
Feinbohrsysteme Fine boring system
L
Hinweise : Für collet chucks / hi-power milling chucks. Note : Preferable for collet chucks / hi-power milling chucks. * Wendeplatte / Insert - TC_06T1_, Schlussel / Wrench - MGAG-03, Id. No. - 55439001. ** Wendeplatte / Insert - TC_1102_, Schlussel / Wrench - MGAG-05, Id. No. - 55439002.
Standard Microbore GA Zubehör Standard Microbore Gear Adjust Accessories
Bohreinheitgröße Unit size M022 M032 M052 M072
Ersatzteile (Schnecke + Unterlegscheibe + Sicherungsring) Spares set (Worm + Spacer + Snap ring) NR2821 SPARES SET NR3821 SPARES SET NR5821 SPARES SET NR7821 SPARES SET
Id. No.
GA-Schlüssel GA Wrench
Id. No.
55540701 55540702 55540703 55540704
2842 2842 5842 5842
55425001 55425001 55425002 55425002
Microbore empfiehlt alle Instandsetzungsarbeiten an GA Bohrstangen oder Bohrköpfen nur von Fachpersonal durchgeführt wird. Microbore strongly advice that any re-conditioning work on GA boring bars or boring rings is carried out by factory trained technicians.
32
00
MTP GA Feinbohrwerkzeugaufnahmen MTP GA Fine boring tool holders
Bezeichnung Designation
Id. No.
Bohrkopf Boring head
MTP75-GA3
55516418
MTP 75
75-112
MTP 105
105-142
MTP 135
135-196
MTP 190
190-251
MTP 245
245-306
MTP 300
300-361
MTP 355
355-526
MTP 520
520-691
MTP 685
685-856
MTP 850
850-1021
MTP135-GA5
55516525
Bohrbereiche Boring range Ø
Microbore Einheit Microbore unit M030BS090T09-50GA M030BS090C09-50GA M030BS090T09-50GA M030BS090C09-50GA M050BS090T11-50GA M050BS090C06-50GA M050BS090T11-50GA M050BS090C06-50GA M050BS090T11-50GA M050BS090C06-50GA M050BS090T11-50GA M050BS090C06-50GA M050BS090T11-50GA M050BS090C06-50GA M050BS090T11-50GA M050BS090C06-50GA M050BS090T11-50GA M050BS090C06-50GA M050BS090T11-50GA M050BS090C06-50GA
Id. No.
Insert
55525205 55525206 55525205 55525206 55525312 55525313 55525312 55525313 55525312 55525313 55525312 55525313 55525312 55525313 55525312 55525313 55525312 55525313 55525312 55525313
TC..090204 CC..060204 TC..090204 CC..060204 TC..110204 CC..060204 TC..110204 CC..060204 TC..110204 CC..060204 TC..110204 CC..060204 TC..110204 CC..060204 TC..110204 CC..060204 TC..110204 CC..060204 TC..110204 CC..060204
Feinbohrsysteme Fine boring system
Feinbohrsysteme Fine boring system
Bohrbereiche Ø 75 - 1021mm Boring ranges Ø 75 - 1021mm
Hinweise : Siehe seite.14-15 Note : For extended range of fine boring applications. Please refer page.14-15.
00
33
GA: SFB Frontbuchsen GA: SFB Front bushings Klelnster Bohrung-Ø = 29mm Minimum bore- Ø = 29mm
MV
GA-Einheit / GA-Unit
EB
S Ø BB min.
Feinbohrsysteme Fine boring system
Feinbohrsysteme Fine boring system
X
Ø AD1
Ø AD
BB Ø min
Bezeichnung Designation
Id. No.
X
S
EB
MV
AD Ø
AD1 Ø
29 29 34 51 51 61 92
SFB-GA2 SFB-GA2 SFB-GA3 SFB-GA5 SFB-GA5 SFB-GA5 SFB-GA7
55528301 55528301 55528302 55528303 55528303 55528303 55528304
11,5 11,5 13,0 20,0 20,0 20,0 20,5
7,7 7,7 8,3 13,8 13,8 13,8 33,5
2,3 4,5 5,0 3,8 7,0 8,0 9,5
7,6 7,6 9,4 15 15 15 19,8
23 23 28 42 42 42 54
11 11 14 20 20 20 30
GA Einheit GA unit M022-BS095T06-50GA* M022-0L095T06-50GA* M032-0L095T06-50GA* M052-BS095TC-50GA** M052-1L095TC-50GA** M052-0L095TC-50GA** M072-0L095TC-100GA**
Id. No.
55525101 55525102 55525201 55525301 55525302 55525303 55525401
* Wendeplatte / Insert - TCMT_06T102L_, Schlussel / Wrench - MGAG-03, Id. No. - 55439001. ** Wendeplatte / Insert - TC_-1102_, Schlussel / Wrench - MGAG-05, Id. No. - 55439002.
34
Hinweis
: GA-Microbore Frontbuchsen werden verwendet, um neue Werkzeuge im do-it-yourself Verfahren herzustellen, oder vorhandene Werkzeuge auf das Konzept GA-MICROBORE umzurüsten. Microbore Einheiten müssen separat bestellt werden.
Note
: GA-Microbore Front bushings are used to manufacture new tools by do-it-yourself or to convert existing tooling to GA-Microbore. Microbore units must be ordered separately.
00
GA: SFB Frontbuchsen GA: SFB Front bushings Konstruktionsdaten Manufacturing data
X2 MV Einzelheit "F" Detail "F"
GT min.
ØBD
AL2 min.
"F"
Bohrdurchmesser / Bore diameter
Y1
GG
LA3
±0.05
Y
Ø D3
X1
S
+0.5
X3
AL1
0.4 x 45° min.
+0.1
Ø D1 R0.3 max.
X Ø D4
GG
H7
Ø D2
Ø KD min.
GT n. mi
12
0°
Feinbohrsysteme Fine boring system
D3 Ø
D4 Ø
SFB-GA2
27
23,1
11
10,5
*
SFB-GA3 SFB-GA5
33 49
28,1 42,1
14 20
12,5 18,5
SFB-GA7
62
54,1
30
18,5
Feinbohrsysteme Fine boring system
D2 Ø
d1
d2
D1 Ø
Ø
KD Ø
.1 ±0
2
LA
GA buchse GA bush
90°
GG
Y = BD -S 2 X= wahlweise Befestigung / optional clamping
±0.1
Ø
LA1
30°
AL1 AL2
X1
X2
11,5
9
4,5
12
13 20
12 15
20,5 20,5
X3
Y1
S
d1 Ø
d2 Ø
GG
GT
LA1 LA2 LA3 MV
7,8
5,4
7,7
6
3,2
M3
9
8,5 11.5 2.5 7,6
5,5 7,5
14,5 9,2 6,3 8,3 21,5 13,7 10,2 13,8
8 11
4,2 5,5
M4 M5
10 12
10 15
8,5
27,5 19,1 10,2 22,5
12
6,4
M6
15
20,7
14 3.5 9,4 21 3.5 15
27
5 19,8
* dia D4 = nach Bedarf / as required
00
35
MB: C Typ Frontbuchsen MB: C Type Front bushings Kleinste Bohrng-Ø = 30mm Minimum bore- Ø = 30mm
MV L
S
EB
VB
BB min.
53°8'
Typ / Type C Fig. 2
30 32
C-WFB-2611 C-WFB-3611
40
64
Feinbohrsysteme Fine boring system
Bezeichnung Designation
Id. No.
Fig.
VB
EB
MV
S
L
Verstellschulussel Adj.- Wrench
Id. No.
55528201 55528202
2 2
0,5 1,3
2,0 3,2
0,4 R 0,2 R
8,7 11,1
16,7 21,4
DS-2 DS-3
55439003 55439004
C-WFB-5611
55528203
2
1,4
5,6
1,2 R
15,9
33,5
DS-5
55439005
C-WFB-7611
55528204
2
2,0
7,9
1,6 R
25,4
49,6
DS-7/10
55439006
Feinbohrsysteme Fine boring system
BB Ø min
Konstruktionsdaten Manufacturing data
+0.2
BD 120°
GG
ST ±0.02 BT BL
+0.2
AD
H7 +0.3
d2
d1
BA
d3
120° BL +0.2
45°
d3
+0.1
45°
max. 118° 9
Größe / Size 7
+0.1
Größe / Size 2, 3, 5
Hinweis : Achten Sie bitte auf die richtige Lage des Schneidenmittenversatzes MV. Die Zeichnungen zeigen den Mittenversatz nach links. L =links; R=rechts. VB - Verstellbereich für die Feinverstellung, ohne Lösen der Anzugsschraube. Frontbuchsen Typ C sind in ihren Außenmaßen identisch mit Frontbuchsen, Fabr. Sandvik Note
36
:
Please consider correct position of tool-point offset MV. Drawings show offset to left. L= left, R = right. VB = Range for fine adjustment without opening the draw screw. The outside dimensions of Front bushing style C are identical to bushings of Sandvik.
00
MB: Feinbohreinheiten MB: Fine boring units
EM
EM
EM
EM
*
**
Hinweis: EP Wendeplatten nur solange der Vorrat reicht Note : EP style inserts while stocks last
Bezeichnung Designation
Id. No.
Wendeplatte Insert
EM
M2B2E04-40S M3B2C06-40S M3B2V-40S* M5B2C06-40S M5B2TC-40S M5B2V-40S* M7B2C09-80S M7B2TC-80S M7B2V-80S*
55526202 55526303 55526304 55526501 55526502 55526503 55526704 55526705 55526706
EP..0401 CC..0602 EP..0602 CC..0602 TC..1102 EP..08T3 CC..09T3 TC..1102 EP..16T3
4 6 6,5 6 11 8,2 9 11 16,5
Feinbohrsysteme Fine boring system
Feinbohrsysteme Fine boring system
(gelötet / brazed) ISO-Wendeplatten / Insert
Konstruktionsdaten Manufacturing data
BB Frontbuchsen Ø min Front bushings 30 32 40 64
C-WFB-2611 C-WFB-3611 C-WFB-5611 C-WFB-7611
BD
AD Ø
BA
BT
BL
ST
d1
d2
d3
g
GG
19 25 30 46
16 20 22 32
9,65 +/-0,02 12,5 +/-0,05 15,4 +/-0,05 23,0 +/-0,05
9 9 13 16
11,5 15,5 24,0 33,0
2,8 4,0 5,0 6,3
4,6 4,6 5,0 6,3
4,6 4,6 5,0 6,3
3,2 3,2 4,3 5,4
1,6 1,6 1,6 -
M3 M3 M4 M5
Hinweise : MICROBORE Einheiten mit gelöteten Hartmetallschneiden sind in Sorten für die Bearbeitung von Grauguß, Stahl und Nichteisenmetallen lieferbar. Im Bestellfall bitte die gewünschte Sorte angeben. Siehe Kennziffer der Id. No. MICROBORE Einheiten müssen separat bestellt werden. Note
00
: MICROBORE units with brazed carbide tips are available in grades for the machining of cast iron, steel and non-ferrous materials. When ordering please specify carbide grade required. See mark in Id. No. MICROBORE units must be ordered separately.
37
GA - Microbore: Handhabung GA - Microbore: Handling Diese Bildfolge soll dazu beitragen, das GA-Microbore System korrekt und zuverlässig zu nutzen. This photo series should aid you to handle GA-Microbore correctly and reliably.
1.
Die Grobeinstellung erfolgt durch die Drehung des Skalenkonus. Die Skalierung dient zur Orientierung. The pre-adjustment is done by turning the dial. The scale should be used for orientation only.
2.
Die GA-MICROBORE Einheit wird nun in die Aufnahmebohrung eingesetzt. Evtl. muß der Skalenkonus leicht gedreht werden, damit er in die Schnecke eingreift.
38
3.
4.
Auf einem Einstellgerät kann die Schneidenposition überprüft werden. Evt. Schritte 1+2 wiederholen.
Nun werden die Anzugschraube und der Gegenhaltering in die Bohrstange eingelegt.
On a tool presetting unit the position of the cutting edge may be controlled. Steps 1+2 can be repeated if necessary.
Draw screw and washer must now be inserted into boring bar.
Feinbohrsysteme Fine boring system
Feinbohrsysteme Fine boring system
The GA-Microbore unit has to be placed in the boring bar hole. If necessary turn dial for engagement with the worm.
00
GA - Microbore: Handhabung GA - Microbore: Handling
5.
Die Anzugschraube muß nun “auf Block” angezogen werden.
6.
Um die Federscheiben auf Vorspannung zu bringen, muß die Anzugschraube um eine halbe Schlüsselumdrehung zurückgedreht werden.
The draw screw has to be tightened to a complete stop.
Feinbohrsysteme Fine boring system
Feinbohrsysteme Fine boring system
In order to preload the springs the draw screw has to be unlocked by a half turn of the locking wrench.
7.
Verstellbereich über Federscheiben Range of adjustment springs
Größe / Size M02 M03 M05 M07
Die Feinverstellung erfolgt mittels Verstellschlüssel. 180° Drehung = 0,01 mm Radius Linksdrehung = Verstellung + Rechtsdrehung = Verstellung -
Bereich / Range Ø 0,5mm Ø 0,7mm Ø 1,0mm Ø 1,5mm
Vorspannung entsprechend Bild-Nr. 6 einstellen. Preload springs as per photo no.6.
Fine adjustment by use of an adjustment wrench. 180° turn = rayon 0.01 millimètres Left turn = Adjustment + Right turn = Adjustment Hinweis :Sobald bei der Feinverstellung der GA-MICROBORE Einheit ein Widerstand gespürt wird, nicht weiterdrehen. Die Federscheiben sind dann auf Block gezogen. Bei Weiterdrehung besteht dann die Gefahr, daß sich die Schnecke löst! Die Vorspannung muß wieder eingestellt werden, d.h. Schritte 1-6 wiederholen. Note
00
: As soon as you feel resistance while turning the adjustment wrench do not continue to turn. The springs are at a dead stop. On continuation of turning the wrench, the circlip and worm may come loose! The preload has to be reinstalled as per steps 1-6.
39
Special / Semi-standard
GPL
Adapter
ØD
Werkzeugaufnahmen : HSK................... /BT................... /SK................... /CAT................... /Others................... Länge (GPL)
:
Durchmesser (ØD)
:
System
: Twinbore “
Tribore “
Art
: Mono “
Modular “
Spezialanweisung
:
Finebore “
................................................................................................................................................................ ................................................................................................................................................................ ................................................................................................................................................................
Adapter
: HSK................... /BT................... /SK................... /CAT................... /Others...................
Length (GPL)
:
Diameter (ØD)
:
System
: Twinbore “ Tribore “ Finebore “
Art
: Mono “
Special Instruction
:
Modular “
................................................................................................................................................................ ................................................................................................................................................................ ................................................................................................................................................................
E-mail
40
:
[email protected]
00