ARCHITEC TUR AL LIGHTING ARCHITECTUR TURAL
Architectural Lighting
For generations the name Peerless® has been synonymous with contemporary design and an extraordinary quality of illumination. Through our continuing research into how light influences a space and the people who inhabit it , Peerless products are engineered for superior results. Technologically advanced luminaires control and emit a soft, natural light, offering a refined balance of visual comfort, dimensionality and drama within an
PEERLESS
architectural setting.
128
www.peerless-lighting.com
PSG9
ARCHITEC TUR AL LIGHTING ARCHITECTUR TURAL
Featured on this page (clockwise from upper left) are Lightfoil® 3, Lightedge® Curved Indirect/Open, Lightline™ Recessed Symmetric and Lightfoil® 2 luminaires. For more information, visit our website at www.peerless-lighting.com.
LITHONIA FL UORESCENT PEERLESS FLUORESCENT
PSG9
www.peerless-lighting.com
129
ARCHITEC TUR AL LIGHTING ARCHITECTUR TURAL
CONTENTS Lightfoil Lightfoil® Lightfoil®2 Lightfoil®3
132 133
Lightline ™ Lightline™ Wall Wash Lightline™ Symmetric Recessed Lightline™ Asymmetric Lightline™ Suspended
134 135 136 137
Parallels Parallels™
138
PEERLESS
Lightedge Lightedge® Lightedge® Angular 139 Lightedge® Curved 141 Lightedge® ID 143 Lightedge® Rectangular 146 Lightedge® Wall 140,142,145,147
130
Mirage Mirage®
148
Lightfin Lightfin® Lightfin® Wall
149 150
Lightduct Lightduct® Lightduct® Wall
151 152
Envision Envision® Envision® Wall Envision® Cove LD6
153 155 156 157
LD9
158
www.peerless-lighting.com
PSG9
www.peerless-lighting.com
160 161 162 163 164 165
Cerra Cerra® Baffle Cerra® Baffle Wall
166 167
Cerra Cerra® Direct Cerra® Direct Accents
168 170
Peerlite Aero Aero®
171
Enzo Enzo®
172
Prima Prima® Prima® ID
173 174
HOT-5 HOT-5® Cove
175
Installation Guide
176
LITHONIA FL UORESCENT PEERLESS FLUORESCENT
PSG9
Cerra Cerra® Cerra® 7 Cerra® 10 Cerra® ID Cerra® Lightvent Cerra® Accessories Cerra® Wall
ARCHITEC TUR AL LIGHTING ARCHITECTUR TURAL
CONTENTS
131
FL OODLIGHTING FLOODLIGHTING
Asymmetric Foil
Intended Use
®
Lightfoil 2
The form is minimal, sculptured, tastefully refined. Cylinder, block and foil shapes merge and blend discreetly with surrounding architecture, offering a singular visual element that complements and accommodates. The optical design is a remarkable accomplishment. No other system delivers light so abundantly, so smoothly, so efficiently for contemporary medium-scale environments. This is architectural surface lighting in its most advanced state. Construction
Finish
laminated to an extruded thermoplastic core material.
Housing & cylinder AA 6063 T6 extruded aluminum. Foil is Reynobond® (Alcoa) composite, consisting of two sheets of corrosion-resistant aluminum
Reflectors Die-formed reflectors combine semi-specular aluminum and baked white enamel.
Ordering Information
volt. For special circuiting, consult factory.
Housing and cylinders powder coated. Foil available in bronze, silver or white finishes.
Listings UL Listed to US and Canadian safety standards (dry location only).
Electrical Specify 120 volt, 277 volt or 347
Example: 4 LF2FW 2 24T5HO U2 120 GEB10 SCT L/LP C224
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Quantity
Nominal length
Number of lamps in cross section
Specify number of fixtures.
U2 U3 U4 U5
1 2
2’ 3’ 4’ 5’
Voltage 120 277 347
Emergency options3
Lamp color 1
EL Emergency battery pack EC Emergency circuit night-light EN Emergency battery pack in the night-light circuit1
L/LP LP830 LP835 LP841
Fixture LF2FW
Lamp type 24T5HO 39T5HO 54T5HO 80T5HO 14T5 21T5 28T5
24W 2’ T5HO 39W 3’ T5HO 54W 4’ T5HO 80W 5’ T5HO 14W 2’ T5 21W 3’ T5 28W 4’ T5
Ballast type GEB10 10% THD ballast Dimming ballasts1 ADEZ Advance Mark 102 ECO10 Lutron ECO10 DMHL Lutron Hi-Lume ADZT Advance Mark 72 OSDIM Osram O-10V2
Options
No lamp 3000°K 80+ CRI 3500°K 80+ CRI (standard) 4100°K 80+ CRI
Switching
GLR Fast blow fuse GMF Slow blow fuse FEP Flat endplate (no cylinder)
Foil finish
SCT Single circuit DCT Dual circuit
C222 Bronze C223 Silver C224 White
NOTES: 1 54T5HO only. 2 Not available in 2’, 3’ or 5’ T5HO. 3 EL, EN and EC only available with SCT.
A - FOIL B - LUMINAIRE
LUMINAIRE CROSS SECTIONS
LF2FW 24W and LF3FW 24W LF2FW 39W and LF3FW 39W LF2FW 54W and LF3FW 54W LF2FW 80W and LF3FW 80W
B 43" 53" 65" 76"
LF2FW –2 T5/T5HO lamps
PEERLESS
LF2FW – 1 T5/T5HO lamp
A 35" 45" 57" 69"
132
www.peerless-lighting.com
PSG9
Asymmetric Foil
The form is minimal, sculptured, tastefully refined. Cylinder, block and foil shapes merge and blend discreetly with surrounding architecture, offering a singular visual element that complements and accommodates. The optical design is a remarkable accomplishment. No other system delivers light so abundantly, so smoothly, so efficiently for contemporary large-scale environments. This is architectural surface lighting in its most advanced state. Construction Housing & cylinder AA 6063 T6 extruded aluminum. Foil is Reynobond® (Alcoa) composite, consisting of two sheets of corrosion-resistant aluminum laminated to an extruded
thermoplastic core material.
Finish
Reflectors
Housing and cylinders powder coated. Foil available in bronze, silver or white finishes.
Die-formed reflectors combine semi-specular aluminum and baked white enamel.
FL OODLIGHTING FLOODLIGHTING
Lightfoil®3
Intended Use
volt. For special circuiting, consult factory.
Listings UL Listed to US and Canadian safety standards (dry location only).
Electrical Specify 120 volt, 277 volt or 347
Ordering Information
Example: 4 LF3FW 3 24T5HO U2 120 GEB10 SCT L/LP C224
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Quantity
Nominal length
Number of lamps in cross section
Specify number of fixtures.
U2 U3 U4 U5
3 4
2’ 3’ 4’ 5’
Voltage 120 277 347
Emergency options3
Lamp color 1
EL Emergency battery pack EC Emergency circuit night-light EN Emergency battery pack in the night-light circuit1
L/LP LP830 LP835 LP841
Fixture
Lamp type
LF3FW
24T5HO 39T5HO 54T5HO 80T5HO 14T5 21T5 28T5
24W 2’ T5HO 39W 3’ T5HO 54W 4’ T5HO 80W 5’ T5HO 14W 2’ T5 21W 3’ T5 28W 4’ T5
Ballast type GEB10 10% THD ballast Dimming ballasts1 ADEZ Advance Mark 102 ECO10 Lutron ECO10 DHML Lutron Hi-Lume ADZT Advance Mark 72 OSDIM Osram O-10V2
Switching SCT Single circuit DCT Dual circuit
Options
No lamp 3000°K 80+ CRI 3500°K 80+ CRI (standard) 4100°K 80+ CRI
GLR Fast blow fuse GMF Slow blow fuse FEP Flat endplate (no cylinder)
Foil finish C222 Bronze C223 Silver C224 White
NOTES: 1 54T5HO only. 2 Not available in 2’, 3’ or 5’ T5HO. 3 EL, EN and EC only available with SCT.
A - FOIL B - LUMINAIRE
LF2FW 24W and LF3FW 24W LF2FW 39W and LF3FW 39W LF2FW 54W and LF3FW 54W LF2FW 80W and LF3FW 80W
B 43" 53" 65" 76"
LF3FW – 3 T5/T5HO lamps
PSG9
LF3FW – 4 T5/T5HO lamps
www.peerless-lighting.com
LITHONIA FL UORESCENT PEERLESS FLUORESCENT
LUMINAIRE CROSS SECTIONS
A 35" 45" 57" 69"
133
RECESSED
2½” Aperture
™
Intended Use
Lightline Wall Wash
The Lightline™ Wall Wash Series brings HOT-5® technology to a recessed environment. Built with a precise specular, asymmetric, aluminum reflector, the Lightline™ Wall Wash luminaire tames the powerful T5HO lamp and the result is a wall bathed with soft, comfortable light.
Construction Housing is formed from painted coldrolled steel. Five-stage ironphosphate pretreatment ensures superior paint adhesion and rust resistance. Painted parts finished
with high-gloss baked enamel.
Electrical
lengths available.
Reflectors
Specify 120 volt , 277 volt or 347 volt. For special circuiting, consult factory.
Listings
Die-formed reflector with baked white enamel finish. Nominal reflectance 90%. Black metal diffuser with round holes.
UL Listed to US and Canadian safety standards.
Fixture Size Nominal 2½” aperture. 2’ and 4’
Ordering Information
Example: 4 LWR9 G 1 54T5HO HOL U4 120 GEB10 L/LP
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Quantity Specify number of fixtures.
Fixture LWR9 Asymmetric recessed
Number of lamps in cross section
Ceiling type G Lay-in grid
1
Reflector/shielding
Voltage
HOL Black metal diffuser with round holes
120 277 347
Lamp type 24T5HO 54T5HO 28T5 14T5
24W 2’ T5HO 54W 4’ T5HO 28W 4’ T5 14W 2’ T5
Nominal length U2 U4
2’ 4’
NOTES: 1 Only available with 54T5HO. 2 Only available with 28T5 and 54T5HO.
Emergency options EL
Ballast type GEB10 10% THD ballast Dimming ballasts ADEZ Advance Mark 101 ADZT Advance Mark 71 ECO10 Lutron ECO 10 DHML Lutron Hi-Lume1 OSDIM Osram 0-10V1
Options
Emergency battery pack2
GLR GMF CP NYC
Fast blow fuse Slow blow fuse Chicago plenum New York City
Lamp color L/LP LP830 LP835 LP841
No lamp 3000°K 80+ CRI 3500°K 80+ CRI 4100°K 80+ CRI
Accessories (Order separately) DHSGS2 Gyp-board flange kit 2’ DHSGS4 Gyp-board flange kit 4’
LUMINAIRE CROSS SECTIONS
PEERLESS
LWR9 – 1 T5/T5HO lamp
134
www.peerless-lighting.com
PSG9
2½” Aperture
Seamlessly sleek, delicate and discrete. Delight in an aesthetically refined, recessed luminaire. HOT5® technology harmonized with the luminaire’s thread-like aperture delivers unobtrusive, balanced downlight. The Lightline™ Symmetric Recessed luminaire is part of the Lightline family of products designed around ultra-slim T5HO lamps. The Lightline™ Series brings a discrete, narrow aesthetic to a variety of architecture. Construction
Reflectors
Electrical
Listing
Housing is formed from one-piece painted cold-rolled steel. Four-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. Painted parts are finished with low-gloss baked enamel.
Die-formed reflector with baked white enamel finish. Nominal reflectance 90%.
Specify 120 volt , 277 volt or 3472 volt. For special circuiting, consult factory.
UL Listed to US and Canadian safety standards.
Shielding
Fixture Size
Arc-shaped, parabolic low iridescent semi-specular aluminum louver.
Nominal 2½” aperture. 2’ and 4’ lengths available.
Ordering Information
Lightline™ Symmetric Recessed
RECESSED
Intended Use
Example: 4 LSR9 G 1 54T5HO LDL U4 120 GEB10 L/LP
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Quantity Specify number of fixtures.
Fixture LSR9 Symmetric recessed
Number of lamps in cross section
Ceiling type G Lay-in grid
Reflector/shielding LDL Low iridescent louver
1
Lamp type 24T5HO 54T5HO 14T5 28T5
24W 2’ T5HO 54W 4’ T5HO 14W 2’ T5 28W 4’ T5
Nominal length U2 U4
2’ 4’
NOTES: 1 Only available with 54T5HO. 2 Only available with 28T5 and 54T5HO.
Emergency options
120 277 347 1
EL Emergency battery pack2
Ballast type GEB10 10% THD ballast Dimming ballasts1 ADEZ Advance Mark 10 ADZT Advance Mark 7 ECO10 Lutron ECO 10 DMHL Lutron Hi-Lume (DIM1) OSDIM Osram O-10V
GLR GMF CP NYC
Fast blow fuse Slow blow fuse Chicago plenum New York City
Lamp color L/LP LP830 LP835 LP841
No lamp 3000°K 80+ CRI 3500°K 80+ CRI 4100°K 80+ CRI
Accessories (Order separately) DHSGS2 Gyp-board flange kit 2’ DHSGS4 Gyp-board flange kit 4’
LSR9 – 1 T5/T5HO lamp
www.peerless-lighting.com
LITHONIA FL UORESCENT PEERLESS FLUORESCENT
LUMINAIRE CROSS SECTIONS
PSG9
Options
Voltage
135
RECESSED
2½” Aperture
™
Intended Use
Lightline Asymmetric
Seamlessly sleek, delicate and discrete. Delight in an aesthetically refined, recessed asymmetric luminaire. HOT-5® technology harmonized with Lightline’s thread-like aperture delivers unobtrusive, balanced asymmetric light. The Lightline™ Asymmetric Recessed Series is part of the Lightline™ family of products designed around ultra-slim T5HO lamps. Lightline luminaires bring a discrete, narrow aesthetic to a variety of architecture.
Available Summer 2006
Construction
Reflectors
Electrical
Listings
Housing is formed from one-piece painted cold-rolled steel. Fourstage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. Painted parts are finished with low-gloss baked enamel.
Die-formed reflector with baked white enamel finish. Nominal reflectance 90%.
Specify 120 volt , 277 volt or 3472 volt. For special circuiting, consult factory.
UL Listed to US and Canadian safety standards.
Shielding
Fixture Size
Arc-shaped, parabolic low iridescent semi-specular aluminum louver.
Nominal 2½” aperture. 2’ and 4’ lengths available.
Ordering Information
Example: 4 LAR9 G 1 54T5HO LDL U4 120 GEB10 L/LP
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Quantity
Fixture
Specify number of fixtures.
LAR9 Asymmetric recessed
Number of lamps in cross section
G Lay-in grid
Lamp type 24T5HO 54T5HO 14T5 28T5
24W 2’ T5HO 54W 4’ T5HO 14W 2’ T5 28W 4’ T5
Emergency type (optional)
120 277 347 1
LDL Low iridescent louver
1
Ceiling type
Voltage
Reflector/shielding
Nominal length U2 U4
2’ 4’
NOTES: 1 Only available with 54T5HO. 2 Only available with 28T5 and 54T5HO.
EL
Ballast type GEB10 10% THD ballast Dimming ballasts2 ADEZ Advance Mark 10 ADZT Advance Mark 7 ECO10 Lutron ECO 10 OSDIM Osram O-10V DMHL Lutron Hi-Lume (DIM1)
Options GLR Fast blow fuse GMF Slow blow fuse CP Chicago plenum
Emergency battery pack2
Lamp color L/LP LP830 LP835 LP841
No lamp 3000°K 80+ CRI 3500°K 80+ CRI 4100°K 80+ CRI
Accessories (Order separately) DHSGS2 Gyp-board flange kit 2’ DHSGS4 Gyp-board flange kit 4’
LUMINAIRE CROSS SECTIONS
PEERLESS
LAR9 – 1 T5/T5HO lamp
136
www.peerless-lighting.com
PSG9
2 ¾” X 2 ½” Rectangular
The LightlineTM Series satisfies all requirements for high-quality indirect light distribution, continuous lamping, low-brightness downlight components and powerful lumen packages. At the same time, it offers minimal fixture widths and profiles, layout and configuration flexibility, and elegant mechanical detailing. Whether straight runs or rectangles, nested patterns or ladder configurations, the LightlineTM system allows an unexpected level of design freedom.
Finish
Fixture Length
rectangular channel. Die-cast end plate mechanically attached with no exposed fasteners.
Standard colors are satin anodized aluminum, standard white (low gloss), white white (gloss) and white white (low gloss).
Die-formed reflectors combine hammertone specular aluminum and baked white enamel (86% nominal reflectance).
Contruction Housing AA 6063 T6 extruded aluminum forming a 2-3/4”x 2-1/2”
volt. Pre-wired with prescribed circuits as specified. For special circuiting, consult factory.
Specify nominal fixture/row length in feet. For long runs, advise maximum extrusion length if 12’ is not acceptable. 4’, 8’ or 12’ nominal sections used to create runs.
Reflectors
SUSPENDED
Lightline™ Suspended
Intended Use
Listings UL Listed to US and Canandian safety standards.
Electrical Specify 120 volt, 277 volt or 347
Ordering Information
Example: 4 LL1 010000 T8 24FT R12 120 GEB SCT LP730 F1/24 C100
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Quantity
Lamp type
Specify number of fixtures/ rows.
T5 HOT5 T8
120 277 347 3
Fixture/row length2
Fixture LL1 2¾ X 2½ rectangular LL1W 2¾ X 2½ rectangular wall mount
(Specify nominal fixture/row length in feet.)
FT
Catalog number 010000 310922 310923 310902 310921 010012
Indirect Indirect/open Indirect/open1 LightVent™1 Indirect/direct T81 Asymmetric wall (LL1W wall mounting only)
EC EN
Ballast GEB T8 electronic ballast GEB10 T5/HOT5 electronic ballast. T8 10% THD electronic ballast. Maximum section length R4 R8 R12
4’ section 8’ section 12’ section
Emergency battery pack Emergency circuit Emergency battery pack with nightlight
Number of emergency sections 1SE 1 section 2SE 2 sections XSE X sections
Mounting (blank) Wall mount F1/ T-bar ceiling F2/ Hard ceiling horizontal j-box
Indirect – 1 T5 lamp
Feed/overall suspension C100 12 12” 15 15” C200 18 18” C005 21 21” 24 24” C032 XX XX” C041
L/LP T8 LP730 LP735 LP741 T5/T5HO LP830 LP835 LP841
No lamp 3000°K 70+ CRI 3500°K 70+ CRI 4100°K 70+ CRI 3000°K 80+ CRI 3500°K 80+ CRI 4100°K 80+ CRI
Indirect/open – 1 T5 lamp
Indirect/open – 1 T8 lamp
www.peerless-lighting.com
Asymmetric wall – 1 T5 lamp
Indirect/direct – 1 T8 lamp
Finish4
Satin anodized aluminum Standard white (low gloss) Soft white (low gloss) White white (gloss) White white (low gloss) C099 Custom color (consult factory) Options5
Lamp color
LUMINAIRE CROSS SECTIONS
Indirect – 1 T8 lamp
PSG9
EL
Switching SCT Single circuit
DL CFG GMF GLR ELH ELS
Damp location label Configuration, contact factory Slow blow fuse Fast blow fuse EM through-wire harness EM through-wire harness with single feed CMG Cord manager
LITHONIA FL UORESCENT PEERLESS FLUORESCENT
NOTES: 1 T5/T5HO special configurations only. Contact factory. 2 For long runs, advise maximum extrusion length if 12’ is not acceptable. 4’, 8’ or 12’ nominal sections used to create runs. 3 Only available in T8 and HOT5. 4 To match custom color chip, specify C099. If unknown, specify XXX. 5 For available options on special configurations, contact factory.
Emergency type (optional)
Voltage
137
RECESSED/SUSPENDED
Recessed/Suspended
Parallels
™
Intended Use A pure expression of light. No cables, no wiring, no housing, no integral ballasts. Stripped of such conventional trappings, the latest design innovation from Peerless offers a striking departure from the monotonous mainstream. The lamps, powered through elegant anodized aluminum stems, are wrapped in parallel luminous elements providing a slim and sophisticated form harmonious with contemporary environments. Construction
Reflectors
Extruded translucent white acrylic diffuser with opaque painted ends. AA 6063 T6 extruded aluminum fixed length yokes. Formed and painted, cold-rolled steel recessed housing.
Die-formed specular reflectors.
Electrical Specify 120 volt , 277 volt or 347 volt. Prewired with prescribed circuits and Molex quick connectors. Available “S” option for step
Ordering Information
Fixtures mount to 4’ grid. Overall, fixture lengths are 4’-9” and 5’-9” respectively.
switching. Step switching option allows system to be switched to 50% power for compliance with common energy codes while maintaining fixture appearance.
Listings
Fixture Length
UL Listed to US and Canadian safety standards.
Lengths available in 4’ and 5’.
Example: 1 PLM9 G 2 54T5HO U4 277 GEB80S SCT LP830
For complete ordering guide and offering, refer to product specification sheets on www.peerless-lighting.com.
Quantity
Fixture
Specify number of fixtures.
PLM9 Recessed/ pendant mount
Number of lamps in cross section
Nominal length U 4 4’ U 5 5’
2
Ceiling type G Lay-in grid (5/16” 9/16”, screw slot)
Voltage 120 277 3471,2
Switching
Options
EL Emergency battery pack
SCT
CP Chicago plenum
Lamp color
Ballast type
Lamp type 54T5HO 28T5 80T5HO
Emergency options
T5HO GEB10 < 10% THD ballast GEB80 < 10% THD, 80% BF GEB80S < 10% THD, 80% BF3 T5 GEB10
