Architectural Lighting

ARCHITEC TUR AL LIGHTING ARCHITECTUR TURAL Architectural Lighting Hydrel® was launched with a mission: to make the most reliable underwater lighting...
Author: Caitlin Fowler
13 downloads 0 Views 2MB Size
ARCHITEC TUR AL LIGHTING ARCHITECTUR TURAL

Architectural Lighting

Hydrel® was launched with a mission: to make the most reliable underwater lighting the world has ever seen. This was no small task, since water is a hostile environment for lighting. But we accomplished it, and in the ensuing decades as we’ve moved up onto land, the Company has continued to build its expanding lines of outdoor lighting products the same way. Rugged. Impenetrable. Uncommonly reliable. One thing is certain: Hydrel products are engineered to outperform our DNA, and customers couldn’t be happier.

H YDREL

Wrigley Building

anything on the market. It is

592

www.hydrel.com

PSG9

“tough environment” lighting company. It’s no wonder. We earned our reputation the hard way – under water. And we excelled next with in-grade solutions, where the surroundings are only a fraction more hospitable. The focus has been on night lights.

ARCHITEC TUR AL LIGHTING ARCHITECTUR TURAL

Hydrel has always been the

These high-performance systems continue to define Hydrel,

Frost Bank

remaining at the heart of our offering. However, in recent years architectural floodlights, accent lights and specialized lighting designs have brought Hydrel out into full view. This leads us to the next significant advance in broadening our reputation – the launch of a completely innovative approach to site lighting design. Our objective is to develop a comprehensive range of outdoor luminaires integrated by singular LaReue Wynn Las Vegas

design signatures. As this concept comes to life, architects and lighting designers will be equipped, for the first time, to realize a high level of aesthetic continuity across all segments of site lighting.

H Y DREL

PSG9

www.hydrel.com

593

ARCHITEC TUR AL LIGHTING ARCHITECTUR TURAL

Introducing G2™ designs, multi-faceted perimeter lighting that combines visual appeal with the superior performance and unequalled quality you expect from Hydrel.

For more information about G2™

H YDREL

products, see pages 596-600.

594

www.hydrel.com

PSG9

www.hydrel.com

596 597 599 600

Floodlighting

601

Site Lighting

611

In-grade Lighting

614

Accent Lighting

623

Step Lighting

632

Border Lighting

635

Mounting

639

Underwater Lighting

644

H Y DREL

PSG9

G2™ Series Building Mounted Pole Mounted Bollards

ARCHITEC TUR AL LIGHTING ARCHITECTUR TURAL

CONTENTS

595

G2™ Merging geometric shapes, elegantly formed.

HYDREL

ARCHITECTURAL SITE LIGHTING

G2™ Family

596

www.hydrel.com

PSG9

G2™ Family

The G2™ Block Series may be applied over entries, within entries, up or down, on all building sides or in concert with G2™ Edge or G2™ Plate products. Lighting distributions are symmetric or asymmetric and project in short, medium and long configurations.

Material

Distribution

Die-cast aluminum housing and door. Fixture fully sealed with silicone gasketing. All hardware for door and mounting accessories are stainless steel. Suitable for wet locations.

Area: IES Type II, IES Type III, IES Type IV, IES Type V.

Lamp 175W max. metal halide MAX. Other lamp types available (see ordering guide).

Reflector High purity anodized specular, semispecular or patterned lighting sheet in various configurations providing optimum optical performance. Reflectors are interchangeable. Reflectors include both segmented and precision-formed types to

G2BD Block dome G2BW Block wedge

Orientation DN Down UP Up

Integrally mounted. Rated for -20°C starting temperatures.

Finish

Lens Molded crowned tempered borosilicate.

Polyester powder coated in a range of textured or semi-matte gray tone or earth tone colors.

Mounting

Listings

Surface mounted over recessed junction box or conduit stub-out.

U.L., C.U.L., IP65, IES full cut-off, suitable for wet locations.

Example: G2BD DN 150M 277 SR2 FLC OLS SF LPI DNAT

Lamp type Metal halide 70M 100M 150M 175M Ceramic metal halide 70CM 70CMT6 100CM 150CM 150CMT6 High pressure sodium 70S 150S Fluorescent 26TRT 32TRT 42TRT

Voltage 120 208 240 277 347 120/277 MVOLT1 TB

Distribution SR2 SR3 SR4SC SR5S

Lens

IES Type II IES Type III IES Type IV IES Type V

FLC FLC5

Accessories 2

Internal IBS Internal backlight shield OLS Obscuring lens CFAMB Color filter amber CFBLU Color filter blue CFGRN Color filter green CFRED Color filter red

G2BD 7-1/2 (191)

7-3/4 (197)

7-1/4 (184)

5-7/8 (149) R 6-1/8 (156)

12 Diameter (305)

G2BW 8 (203)

8 (203)

8 (203)

5-3/4 (146)

Down (DN) orientation only. 12-1/4 (311)

PSG9

12-1/4 (311)

www.hydrel.com

Option Photo control PE Photo cell Fusing DF Double fuse3 SF Single fuse3 Ballast GEB Generic electronic ballast4 MLEBAD Analog dimming ballast4,5 BLS Bi-level switching6

Lamp LPI Lamp included

Finish DBLB Designer black, textured DSPD Dark gray, textured DNAT Natural aluminum, textured DWHG Designer white, textured DDBT Dark bronze, textured DSPF Rust, textured DSST Sandstone, textured CF Custom finish

LITHONIA FL UORESCENT HYDREL FLUORESCENT

NOTES: 1 MVOLT is standard on all fluorescent and metal halide lamps with electronic ballast option. 2 Accessories are mutually exclusive. Choose one. 3 SF only valid with 120V, 277V or 347V. DF only valid with 208V or 240V. 4 Electronic ballasts only are available with metal halide (150W max), fluorescent and MVOLT ballasts. 5 0-10V dimmer required (by others). 6 BLS only available for 175M and 150S.

Ballast

provide maximum performance and uniformity. All HID sockets are porcelain medium-base or G12 based, pulse rated for 4KV.

Ordering Information

Product

Building Mounted

ARCHITECTURAL SITE LIGHTING

G2™ Block

Intended Use

597

ARCHITECTURAL SITE LIGHTING

G2™ Family



Intended Use

G2 Edge

G2EDGE is uniquely suited for mounting to columns and mullions. Choice of small-scale dome or wedge shaped enclosures house a wide range of high-performance optical systems for safe and secure perimeter lighting, or accent or wallwash lighting effects.

Building Mounted

Material Die-cast aluminum housing and door. Fixture fully sealed with silicone gasketing. All hardware for door and mounting accessories are stainless steel. Suitable for wet locations.

IV, IES Type V. flood: narrow spot, spot, flood, wide flood, wall wash.

based, pulse rated for 4KV.

Reflector

Molded crowned tempered borosilicate.

Lens

High purity anodized specular, semispecular, or patterned lighting sheet in various configurations providing optimum optical performance. Reflectors are interchangeable. Reflectors include both segmented and precision-formed types to provide maximum performance and uniformity. All HID sockets are porcelain medium-base or G12

Lamp 175W max. metal halide MAX. Other lamp types available.

Distribution

Surface mounting over recessed, compact junction box or conduit stub-out.

Listings U.L., C.U.L., IP65, IES full cut-off, suitable for wet locations.

Ballast Integrally mounted. Ballasts are 100% factory tested,

Example: G2EW DN 150M 277 SR2 STD FLC OLS SF LPI DNAT

Product

Lamp type

Voltage

Mounting

Lens

Option

Metal halide 70M 100M 150M 175M Ceramic metal halide 70CM 70CMT6 100CM 150CM 150CMT6 High pressure sodium 70S 150S Fluorescent 26TRT 32TRT 42TRT

120 208 240 277 347 120/277 MVOLT1 TB

STD Standard for mounting on stub out or 3” wide or less junction box E4S 4O or 4S junction box cover STDDE Standard direct entry 3/4” NPT

FLC FLC5

Photo control PE Photo cell Fusing5 DF Double fuse SF Single fuse Ballast GEB Generic electronic ballast6 MLEBAD Analog dimming ballast6,7 BLS Bi-level switching8

Orientation

Distribution NSP SP FL WFL SR2 SR3 SR4SC SR5S WWD

Accessories

4

IBS Internal backlight shield OLS Obscuring lens CFAMB Color filter amber CFBLU Color filter blue CFGRN Color filter green CFRED Color filter red

Narrow spot2 Spot Flood Wide flood IES Type II IES Type III IES Type IV IES Type V Wall wash3 G2EW 3-3/4 (95)

9/16 (14) 13-3/4 (349)

12-1/4 (311)

5-11/16 (144) 14 (356)

12-1/4 (311) 13-3/4 (349)

G2ED 9/16 (14)

HYDREL

Polyester powder coated in a range of textured or semi-matte gray tone or earth tone colors.

G2ED Edge dome G2EW Edge wedge

DN Down UP Up

598

Finish

Mounting

Area: IES Type II, IES Type III, IES Type

Ordering Information

and rated for -20°C starting temperatures.

13-3/4 (349)

3-3/4 (95)

12-1/4 (311)

Lamp LPI

Lamp included

Finish DBLB

Designer black, textured DSPD Dark gray, textured DNAT Natural aluminum, textured DWHG Designer white, textured DDBT Dark bronze, textured DSPF Rust, textured DSST Sandstone, textured CF Custom finish Optional two-tone finish __/ GLS Gloss finish on dome/wedge __/ POL Polished finish on dome/wedge9

NOTES: 1 MVOLT is standard on all fluorescent and metal halide lamps with electronic ballast option. 2 NSP only available with 70CMT6 and 150CMT6. 3 WWD includes 14” extended wall mount, consult factory. 4 Accessories are mutually exclusive. Choose one. 5 SF only valid with 120V, 277V, or 347V. DF only valid with 208V or 240V. 6 Electronic ballasts only are available with metal halide lamps, 150W max. 7 0-10V dimmer required (by others). 8 BLS only available for 175M and 150S. 9 Not available with G2EW.

5-9/16 (141) 13-3/4 (349)

www.hydrel.com

12-1/4 Diameter (311)

Down (DN) orientation only.

PSG9

G2™ Family

Pole mounted dome or wedge shaped enclosures house a range of high-performance optical systems for path, plaza and parking areas.

Pole Mounted

Material

Distribution

Lens

Finish

Die-cast aluminum housing and door. Fixture fully sealed with silicone gasketing. All hardware for door and mounting accessories are stainless steel. Suitable for wet location.

Area: IES Type II, IES Type III, IES Type IV, IES Type V.

Molded crowned tempered borosilicate.

Reflector

Mounting

Polyester powder coated in a range of textured or semi-matte gray tone or earth tone colors.

High purity anodized specular, semispecular, or patterned lighting sheet in various configurations providing optimum optical performance. Reflectors are interchangeable. Segmented reflectors provide maximum performance and uniformity. All HID sockets are porcelain medium-base or G12 based, pulse rated for 4KV.

Luminaire mounts to 4" square or 4" round pole standard aluminum. A custom 3-3/4" square design pole with center line reveals also available.

Weight

Ballast

Listings

High power factor magnetic ballast standard. Electronic ballast also available. Ballast rated for low starting temperatures.

U.L., C.U.L., IP65, IES full cut-off, suitable for wet locations.

Lamp T-6, G12 to 150W; E-17 med. base to 175W.

Socket G-12, medium-base or E27 base.

Ordering Information

Lamp type

Voltage

G2XD Xtend dome G2XW Xtend wedge

Metal halide 70M 100M 150M 175M Ceramic metal halide 70CM 70CMT6 150CM 150CMT6 High pressure sodium 70S 150S Fluorescent 26DTT 32TRT 42TRT

120 208 220 240 277 347 120/277 MVOLT1 TB

Distribution SR2 SR3 SR4SC SR5S

IES Type II IES Type III IES Type IV IES Type V

Mounting SPA Square pole mount RPA Round pole mount

1.45

Accessories2

Option

Lamp

IBS Internal backlight shield OLS Obscuring lens

Photo control PE Photo cell Fusing DF Double fuse3 SF Single fuse3 Ballast GEB Generic electronic ballast4 MLEBAD Analog dimming ballast4,5 BLS Bi-level switching6

LPI Lamp included

Front 3-3/4 (95)

Back

Back 7-3/4 (197)

7-3/4 (197) 14 (356)

12-3/4 (311)

Side

24 (609)

24 (609)

Note: see specification sheet for more detailed dimensions.

www.hydrel.com

Finish DBLB Designer black, textured DSPD Dark gray, textured DNAT Natural aluminum, textured DWHG Designer white, textured DDBT Dark bronze, textured DSPF Rust, textured DSST Sandstone, textured CF Custom finish Optional two-tone finishes __/GLS Gloss finish on dome/ wedge __/POL Polished finish on dome

LITHONIA FL UORESCENT HYDREL FLUORESCENT

G2XD

G2XW Front 3-3/4 (95)

Side

PSG9

EPA

Example: G2XW 150M 277 SR2 SPA OLS SF LPI DNAT

Product

NOTES: 1 MVOLT is standard on all fluorescent or metal halide lamps with electronic ballast option. 2 Accessories are mutually exclusive. Choose one. 3 SF only valid with 120V, 277V, or 347V. DF only valid with 208V or 240V. 4 Electronic ballasts only are available with metal halide lamp types, 150W max. 5 0-10V dimmer required (by others). 6 BLS only available for 175M and 150S.

29.5 lbs.

ARCHITECTURAL SITE LIGHTING

G2™ Xtend

Intended Use

599

ARCHITECTURAL SITE LIGHTING

G2™ Family



G2 Louver Bollard

Intended Use The G2™ Bollard Series is designed to work in building perimeter areas and public spaces completing a wide variety of architectural styles. The G2™ Bollard fixture offers an unmatched impact-resistant mounting and leveling design ensuring life-long performance.

Material

temperature.

Copper-free aluminum A360.

Light Options

Lamp

Choose between patent-pending LED color wash or light wash. The LED color wash option adds vibrant color to the bollard and creates the opportunity for customized applications. The optional light wash

Fluorescent: 42W max., triple tube. HID: 70W max. G12, 100W max. E17.

Ballast Integrally mounted core and coil, electronic ballast with low starting

Ordering Information

Fasteners

IES cutoff.

U.L., C.U.L., IP65, suitable for wet locations.

Stainless steel.

Finish Polyester powder coated in a range of textured semi-matte.

Example: G2LBD 36 100M MVOLT SYM LEDBF LEDCWB DCT GEB LPIC DNAT

Lamp type

Voltage

Distribution

Light options – front4

Light options – back4

G2LBD G2LBW

Metal halide2 70M 100M Ceramic metal halide2 70CM 100CM 35CMT6 70CMT6 High pressure sodium2 50S 70S 100S Fluorescent 26DTT 32TRT 42TRT

120 208 240 277 347 120/277 MVOLT3 TB

SYM Symmetric FT Forward throw

LWF Light wash front LEDAF LED color wash, amber front LEDBF LED color wash, blue front LEDRF LED color wash, red front LEDCWF LED color wash, cool white front LEDWWF LED color wash, warm white front LEDRYF LED color wash, royal blue front

LWB Light wash back LEDAB LED color wash, amber back LEDBB LED color wash, blue back LEDRB LED color wash, green back LEDCWB LED color wash, cool white back LEDWWB LED color wash, warm white back LEDRYB LED color wash, royal blue back

36 42

G2LBW

G2LBD

Light center height 36 (914) or 30 (762)

41 (1041) or 35 (889)

8 (203)

9 (229)

8 (203)

8 (203)

HYDREL

Listings

Product

Overall height1

600

reflector illuminates the bollard base by redirecting light from main lamp source.

4 (102)

9 (229)

41 (1041) or 35.5 (902)

8 (203)

www.hydrel.com

4 (102)

Lamp11

Option Control DCT Fusing DF SF Ballast GEB

Dual circuit5

LPI Lamp included

Double fuse6 Single fuse7

LPIC Lamp included (coated)

Generic electronic ballast8 MLEBAD Electronic dimming ballast8,9 EL N SD Emergency battery backup self diagnostic10

NOTES: 1 Bollard heights are nominal (shown in inches). 2 All lamps (excluding 35CMT6 and 70CMT6) are coated as recommended unless LPI is specified. 3 MVOLT standard with fluorescent lamps and metal halide lamps with electronic ballast option. 4 Light options are mutually exclusive. Choose one per side. For single circuit wiring, LED light option not available with MVOLT or electronic ballast option operating at 277V, or with 347V. For DCT dual circuit option, secondary LED voltage required to be 120V (for primary voltages: 120V, 208V, 347V, MVOLT) or 240V (for primary voltages 240V or 277V). 5 DCT available with LED color wash option only.

Finish DBLB

Designer black, textured DSPD Dark gray, textured DNAT Natural aluminum, textured DWHG Designer white, textured DDBT Dark bronze, textured DSPF Rust, textured DSST Sandstone, textured CF Custom finish _/PL Louvers to match12

6 SF available with 120V, 277V or 347V on HID fixture only. 7 DF available with 208V or 240V on HID fixture only. 8 Electronic ballast options available with metal halide lamps only. 9 0-10V remote analog dimmer system required (by others). 10 Available with fluorescent only. 11 LPIC recommended for E17 and ED17 lamps. Not available with fluorescent, 35CMT6 or 70CMT6HID lamps. 12 Standard louver finish: matte black top, high gloss white bottom unless __/PL is chosen. __/PL is not recommended for DWHG white or other light color finishes due to increased visible glare and reduced fixture cutoff.

PSG9

Architectural Floodlight

7000

The 7000 Series floodlight is a compact, high-performance outdoor fixture used for façade and landscape lighting.

Material

NOTE: All lamps must be rated for "Universal Burning Position" because fixture tilt changes lamp orientation.

provide maximum performance and uniformity.

Weight

Die-cast aluminum housing and door.

Lens

Socket

Electrical Components

EPA

Flat tempered glass.

Incandescent: mini-can screw base. Fluorescent: 4-pin, GX24Q base. HID: G-12, medium, or E27 base pulserated 4KV.

Integrally mounted ballasts rated for low temperatures.

Lamp Incandescent: T-4, mini-can to 100W. Fluorescent: TRT triple-tube lamps to 42W. HID: T-6, G12 to 70W, E-17 medium-base to 70W; elliptical, E-27 to 80W.

Polyester powder coated in a range of textured or semi-matte finishes.

U.L., C.U.L., IP65, suitable for wet locations.

Stainless steel.

Example: 7000 70M 120 FL YM SMSA18 BD LPI BL

Product

Lamp type

Voltage

Distribution

Mounting

7000

Incandescent1 100Q Fluorescent 26TRT 32TRT 42TRT Metal halide 70M 100M Ceramic metal halide 70CM 35CMT6 70CMT6 High pressure sodium 35S1 50S 70S

120 208 240 277 347 120/277 MVOLT2 TB

TSP Tight spot3 NHSP Narrow horizontal spot3 MFL Medium flood3 FL Flood4

KM Knuckle mount YM Yoke mount

Mounting accessories See page 610.

7000 KM 11-3/4 (298)

6 (153)

7000 YM 11-3/4 (298)

8-1/4 (210)

13-7/8 (353)

www.hydrel.com

Accessories Internal ISS Internal source shield5 IHL Internal honeycomb louver6,7 CFAMB Color filter amber7 CFRED Color filter red7 CFBLU Color filter blue7 CFGRN Color filter green7 External8 BD Barn doors GS Glare shield

Lamp LPI Lamp included

Finish BL BZ DDB DNA GN GR SND STG TVG WH CF

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

LITHONIA FL UORESCENT HYDREL FLUORESCENT

5-3/4 (146)

* Mounting not included.

PSG9

0.64

Fasteners

High purity anodized specular, semispecular or patterned lighting sheet in various configurations designed to

Ordering Information

NOTES: 1 Available in 120V only. 2 MVOLT is the standard voltage for fluorescent lamps. 3 Available with T6 and T4 lamps only. 4 Available with E17 and TRT lamps only. 5 Available with TSP and MFL distributions only. 6 Available with FL distribution only. 7 Not available with NHSP. 8 Accessories are mutually exclusive. Choose one.

20 lbs.

Listings

Finish

Reflector

FL OODLIGHTING FLOODLIGHTING

Intended Use

601

FL OODLIGHTING FLOODLIGHTING

Architectural Floodlight

Intended Use

7100

The 7100 Series floodlight is a compact, high-performance outdoor fixture used for façade and landscape lighting.

Material

Socket

Mounting

Finish

Die-cast aluminum housing and door.

Incandescent: recessed single contact (RSC), minican screw base. HID: G-12, medium or E27 base pulse-rated 4KV.

Knuckle or yoke mounted (180° vertical, 360° rotation); fixed mounted for ceiling or wall. Knuckle mount: die-cast aluminum with 3/4" NPT galvanized nipple standard. Yoke mount: aluminum with 10 ft of 18-3 STW flexible cord polymer yoke mount caps are black finish.

Polyester powder coated in a range of textured or semi-matte finishes.

Lamp Incandescent: T-3, RSC Quartz to 500W, T-4, minican to 250W. HID: T6, G12 to 150W, E-17 medium-base to175W; elliptical, E-27 to 150 W.

Reflector High purity anodized specular, semispecular, patterned lighting sheet in various configurations designed to provide maximum performance and uniformity.

NOTE: All lamps must be rated for “Universal Burning Position” because fixture tilt changes lamp orientation.

Integrally mounted ballasts rated for low starting temp.

Flat tempered glass standard.

37 lbs. 1.27

Listings

Example: 7100 150M 120 VFL KM WMSA BD SF LPI BL

Product

Lamp type

Voltage

7100

Incandescent 250Q 300Q 400Q 500Q Metal halide 70M 100M 150M 175M Ceramic metal halide 70CM 100CM 70CMT6 150CMT6 70CMTD 150CMTD High pressure sodium 70S 100S 150S

120 208 240 277 347 120/277 TB

Mounting KM YM CM WMS

Knuckle mount Yoke mount Ceiling mount3 Wall mount side3 WUS Wall mount side up3

Distribution NSP NHSP SP HSP HFL VFL WFL

Option

Lamp

Fusing SF Single fuse7 DF Double fuse8 Photo control PE Photo cell Re-strike QRS Quartz emergency re-strike9

LPI Lamp included

Mounting accessories See page 610.

Accessories

Narrow spot1 Narrow horizontal spot2 Spot Horizontal spot Horizontal flood2 Vertical flood Wide flood

Internal ISS CFAMB CFRED CFBLU CFGRN External5 BD GS LC

7100 KM

Finish BL BZ DDB DNA GN GR SND STG TVG WH CF

Internal source shield4 Color filter amber Color filter red Color filter blue Color filter green Barn doors Glare shield6 Polycarbonate cover6

7100 YM 15-3/4 (400)

15-3/4 (400)

6-3/4 (171) 6-3/4 (171)

HYDREL

Weight

U.L., C.U.L., IP65, suitable for wet locations.

Ordering Information

602

Stainless steel.

EPA

Electrical Components

Lens

Fasteners

16-1/2 (419)

13-1/4 (337)

9-1/4 (235)

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

NOTES: 1 Available with 70CMT6, 150CMT6 and 250Q lamps only. 2 Not available with RSC base lamps. 3 Not available with mounting accessories. 4 Not available with VFL or WFL distributions. 5 Accessories are mutually exclusive. Choose one. 6 Not available with CM mounting. 7 Available with 120V, 277V or 347 HID only. 8 Available with 208V or 240V HID only. 9 Not available with NSP, WFL and HSP distribution. * Mounting not included.

18-1/2 (470)

www.hydrel.com

PSG9

Architectural Floodlight

7200

The 7200 Series floodlight is a high-performance fixture used for façade and area lighting.

400W max.

Material

Reflector

Lens

of textured semi-matte finishes.

Die-cast aluminum housing and door.

High purity anodized specular, semispecular, or patterned lighting sheet in various configurations designed to provide optimum optical performance. Reflectors are interchangeable using four screws and quick-release electrical connectors (with the exception of spot reflectors). Reflectors include both segmented and hydroformed types to provide maximum performance and uniformity.

Flat tempered glass.

Fasteners

Mounting

Stainless steel.

Knuckle or yoke mounted (180° vertical, 360° rotation) on pole, stanchion, wall or tenons.

Weight

Electrical Components

EPA

Integrally mounted ballasts rated for low temperatures.

3.00

Listings

Finish

U.L., C.U.L., IP65, suitable for wet locations.

Lamp HID to 400W. NOTE: All lamps must be rated for “Universal Burning Position” because fixture tilt changes lamp orientation.

Socket Porcelain mogul base rated 5KV.

50 lbs.

Polyester powder coated in a range

Ordering Information

Product 7200

Example: 7200 400M 277 WFL KM EWM24 GS LPI BZ

Voltage

Mounting

120 208 240 277 347 120/277 TB

KM Knuckle mount YM Yoke mount

Lamp type

Distribution

Metal halide 200M1,2 250M 320M1 350M1,2 400M High pressure sodium 250S 400S

SP Spot HSP Horizontal spot NHSP Narrow horizontal spot HFL Horizontal flood VFL Vertical flood WFL Wide flood

Mounting accessories See page 610.

7200 KM

Accessories

Options

Internal ISS Internal source shield3 CFAMB Color filter amber CFRED Color filter red CFBLU Color filter blue CFGRN Color filter green External4 BD Barn doors GS Glare shield LC Polycarbonate cover EGL Ext. grid louver5 FGS Full glare shield

23-3/8 (594)

10-3/8 (264)

PSG9

23 (584)

7200 YM 23-3/8 (594)

10-3/8 (264)

14-7/16 (367) 10-1/2 (267)

www.hydrel.com

SF DF PER QRS

6

Single fuse Double fuse7 Photo cell receptacle8 Quartz emergency restrike ballast9 CWA Constant wattage ballast10 SCWA Super CWA pulse start11

Lamp LPI Lamp included

Finish BL BZ DDB DNA GN GR SND STG TVG WH CF

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

LITHONIA FL UORESCENT HYDREL FLUORESCENT

14-7/16 (367)

NOTES: 1 Available only with SCWA ballast. 2 200M and 350M are not available with SP distribution. 3 Not available with WFL distribution. 4 Accessories are mutually exclusive. Choose one. 5 EGL accessory available in matte black finish only. 6 Available with 120V , 277V or 347V HID only. 7 Available with 208V, 240V or 480V HID only. 8 NEMA twist lock receptacle only, photo control by others and requires mounting accessory. 9 Not available with TBV, NHSP, SP, WFL or HSP. 10 Available only with 250M or 400M. 11 Available only with 200M, 250M, 320M, 350Mor400M.

FL OODLIGHTING FLOODLIGHTING

Intended Use

603

FL OODLIGHTING FLOODLIGHTING

Architectural Floodlight

Intended Use

7200

The 7200 Series flood is designed for use in façade and area lighting.

1000W

Material

Reflector

Lens

Fasteners

Die-cast aluminum housing and door.

High purity anodized specular, semispecular or patterned lighting sheet in various configurations to provide optimum optical performance. Reflectors are interchangeable using four screws and quick-release electrical connectors (with the exception of spot reflectors.) Reflectors include both segmented and hydroformed types to provide maximum performance and uniformity.

Flat tempered glass.

Stainless steel.

Electrical Components

Weight

Externally mounted ballasts rated for low starting temp. Ballast box must be specified.

40 lbs. – Head only, does not include ballast.

Finish

3.00

Polyester powder coated in a range of textured or semi-matte finishes.

Listings

Lamp HID to 1000W. NOTE: All lamps must be rated for “Universal Burning Position” because fixture tilt changes lamp orientation.

Socket Porcelain mogul base rated 5KV.

Ordering Information

EPA

U.L., C.U.L., IP65, suitable for wet locations.

Example: 7200 1000M 120 VFL KM SMB GS LPI BZ

Product

Lamp type

Voltage

Mounting

7200

1000M 1000S

120 208 240 277 347 120/277 TB TBV

KM Knuckle mount YM Yoke mount

Ballast mounting accessories1 SMB SMBEWM

Distribution

SMBPMT SMBSMSA

SP Spot HSP Horizontal spot NHSP Narrow horizontal spot HFL Horizontal flood VFL Vertical flood WFL Wide flood

SMBSMT SMBTNM

Surface mounted ballast SMB extended wall mount Pole mount tee2 SMB stanchion mount SMB stanchion mount tee2 SMB tenon mount3

Accessories

Options

Lamp

Internal ISS Internal source shield4 External5 BD Barn doors GS Glare shield EGL Ext. grid louver6 FGS Full glare shield

Fusing SF Single fuse7 DF Double fuse8 Photo control PER Photo cell receptacle9 Re-strike QRS Quartz emergency re-strike ballast10 Ballast CWA Constant wattage ballast11

LPI Lamp included

For futher information, see page 641.

7200 KM

7200 YM

23-3/8 (594) 23-3/8 (594)

10-3/8 (264)

HYDREL

10-3/8 (264)

604

14-7/16 (367) 23 (584)

14-7/16 (367) 10-1/2 (267)

www.hydrel.com

Finish BL BZ DDB DNA GN GR SND STG TVG WH CF

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

NOTES: 1 If not selected, fixture will ship less ballast. 2 Two fixtures per mount. 3 For use with KM only. 4 Not available with WFL distribution. 5 Accessories are mutually exclusive. Choose one. 6 EGL available in matte black finish only. 7 Available with 120V, 277V or 347V only. 8 Available with 208V, 240V or 347V only. 9 NEMA twist lock receptacle only, photo control by others. 10 Not available with TBV, NHSP, SP, WFL or HSP distribution. 11 Available with 1000M only.

PSG9

Architectural Flood Accessories

2-3/8 (60)

2-3/8 (60)

11-3/4 (298)

11-3/4 (298)

6 (153)

6 (153)

BD Barn doors

4 (102)

22-13/16 (580)

GS Glare shield

15-3/4 (400)

15-3/4 (400)

15-3/4 (400)

9-3/4 (235)

9-3/4 (235)

9-3/4 (235)

GS Glare shield

LC Polycarbonate cover

7200

5-38 (137) 2-5/8 (67)

16-3/4 (425) 252 10

14 (354)

11-3/8 (289)

22-13/16 (580)

4 (102)

22-13/16 (580)

5-38 (137)

10 (252)

14 (354)

LC Lexan covers

GS Glare shield

www.hydrel.com

LITHONIA FL UORESCENT HYDREL FLUORESCENT

EGL Eternal grid louver

BD Barn door

PSG9

7100

1-3/4 (45)

4 (102)

BD Barn door

FL OODLIGHTING FLOODLIGHTING

7000

605

FL OODLIGHTING FLOODLIGHTING

Performance Floodlight

Intended Use

8100

The 8100 Series is a high-performance compact precision lighting system that provides consistent styling with a variety of light distributions. Multiple optical systems provide a wide range of precise light control. For use in façade, area and pathway lighting. Material

Lens

Die-cast, copper-free aluminum (A360) housing and doors.

Flat tempered glass for maximum resistance to impact and thermal shock.

Lamp

Mounting

ED-17 medium-base to 175W, T6 G12 base to 150W, Quartz T4 mini-can base to 250W.

AWM: cast aluminum wall mount plate for mounting over 4-0/4-S recessed J-Box. AWMDE: surface conduit direct entry available for through-branch wiring, 3/4" NPT drilling standard. PM: steel mounting plates for attachment to pole using a unique block/receiver assembly. The block bolts to a pole and engages the receiver within the 8100 integral arm.

Reflector High purity anodized specular, semispecular or patterned lighting sheet in various configurations to provide optimum optical performance and uniformity.

Ordering Information

A single threaded locking fastener secures the fixture to pole. YM: 1-1/ 2" wide aluminum yoke, 15° up/down adjustment and stainless steel locking hardware allows fixture head to easily be aimed and fixed in place. Fixtures are provided with a minimum of 10 ft of 18/3 ST-W cord for power supply.

Finish

Ballast

Listings

High power factor magnetic core and coil standard. Electronic ballast optional.

U.L., C.U.L., IP67.

Product

Lamp type

Voltage

Mounting

8100

Incandescent 100Q 150Q 250Q Fluorescent1 42TRT 2/42TRT Metal halide 50M 70M 100M 150M 175M Ceramic metal halide 70CM 100CM 70CMT6 150CMT6 High pressure sodium 50S 100S 150S

120 208 240 277 347 120/277 TB MVOLT2

AWM Adj. wall mount AWMDE Adj. wall mount, direct entry YM Yoke mount PMEF Pole mount flat, square pole PME3 Pole mount 3" diameter, round pole PME4 Pole mount 4" diameter, round pole Distribution

Floodlights3 NSP Narrow spot4 SP Spot NFL Narrow flood MFL Medium flood FL Flood WFL Wide flood VWFL Vertical wide flood5 Area lights SR2 IES Type II SR3 IES Type III SR4SC IES Type IV SR5S IES Type V

Accessories Internal ISS Internal source shield6 LSF Linear spread filter VSF Vertical spread filter CFAMB Color filter amber CFRED Color filter red CFBLU Color filter blue CFGRN Color filter green External7 Mounting accessories BD Barn doors See page 610. FGS Full glare shield HGS Half glare shield HS House side shield8 WRG Wire rock guard

8100 AWM/AWMDE 10 (254)

14-3/4 (375)

5-1/8 (130)

D.E. (direct entry)

8-1/8 (206)

D.E. (direct entry)

8100 YM

HYDREL

EPA 1.41

Weight 26.5 max.

Example: 8100 150M 120 VWFL YM SMSA18 BD LPI BL

5-1/8 (130)

606

Textured TGIC powder coat polyester finish.

10-1/8 (130)

10 (254) 14-1/16 (357)

8100 PM 8-1/8 (206)

10 (254) 8 )

www.hydrel.com

17-1/4 (438) 12-1/4 (311)

Options

Lamp

Photo control PE Photo cell9 Fusing SF Single fuse10 DF Double fuse11 Ballast GEB Generic electronic ballast12 MLEBAD Electronic analog dimming12, 13 EL N Battery backup (for (2) 42TRT only)5 EL N ICE Battery backup for operation in low temperature conditions (for (2) 42TRT only)5

LPI Lamp included

Finish BL BZ DDB DNA GN GR SND STG TVG WH CF

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

NOTES: 1 Fluorescent lamps only available with flood (FL) distribution. 2 MVOLT is standard on all fluorescent lamps (unless ELN selected) and metal halide lamps with GEB or MLEBAD option. 3 Flood distributions are not available with PMEF, PME3 or PME4. 4 Available for G12 and mini-can bases only. NSP = spot distribution with ISS. 5 Only available with 2/42TRT. 6 Not available with SR2, SR3, SR5, standard on NSP and SR4SC. 7 Accessories are mutually exclusive. Choose one. 8 HS only available with SR2 and SR3 distributions and not available with yoke mount. 9 PE not available with yoke mount. 10 SF is available with 120V, 277V or 347V on HID only. 11 DF is available with 208V, 220V or 240V on HID only. 12 Electronic ballast only are available with metal halide lamps 150W max. and MVOLT voltage. 13 0-10V dimmer not included.

PSG9

Performance Floodlight

8100

The 8100 EO Series is a high-performance emergency compact fluorescent lighting system. Recommended applications: Areas along the path of egress, educational, athletic fields, health care and commercial facilities needing standby of emergency illumination. For use in façade, area and pathway lighting. Operation

(A360) housing and doors.

When the normal supply of AC power fails, the 8100 EO instantly switches to the emergency mode, keeping two compact fluorescent lamps illuminated for a minimum of 90 minutes at full output. When AC power is restored the emergency system returns to the normal mode. Ambient temperature -20°C to + 55°C with ICE option.

Lamp

Material Die-cast, copper-free aluminum

Two 42W Gx24q-4 base compact fluorescent lamps.

Mounting YM: 1-1/2" wide aluminum yoke and stainless steel locking hardware allows fixture head to easily be aimed and fixed in place. Fixtures are provided with a minimum of 10 ft of 18/3 ST-W cord for power supply. AWM: cast aluminum wall mount plate for mounting over 4-0/4-S

Emergency Only

recessed J-Box. 15° up/down adjustment. AWMDE: surface conduit direct entry available for throughbranch wiring, 3/4" NPT drilling standard. PM: steel mounting plates for attachment to pole using a unique block/receiver assembly. The block bolts to a pole and engages the receiver within the 8100 integral arm. A single threaded locking fastener secures the fixture to pole.

Total Lumen Output

EPA

6400 lumens.

1.5

Test Switch

Finish

Single pole.

Textured TGIC powder coat polyester finish.

Illumination Time

Input Voltage

Charging Indicator Light

Listings

LED.

U.L., C.U.L., IP67.

Recharge Time 24 Hours. 120V or 277V, 60Hz.

90 minutes.

Ordering Information

Example: 8100 EO 2/42TRT 120 FL YM LPI BL

Product

Emergency

Lamp type

Voltage

8100

EO

Fluorescent 2/42TRT

120 277

Distribution FL Flood

Mounting accessories

Mounting AWM

Adj. wall mount AWMDE Adj. wall mount, direct entry YM Yoke mount PME3 Pole mount 3" diameter, round pole PME4 Pole mount 4" diameter, round pole

See page 610.

Options

Lamp

ICE For low ambient conditions RTSW Remote test switch

LPI Lamp included

AWM 10 (254)

14-3/4 (375)

5-1/8 (130)

D.E. (direct entry)

YM

PM 10-1/8 (130)

10 (254) 14-1/16 (357)

10 (254) 5-1/8 (130)

www.hydrel.com

17-1/4 (438) 12-1/4 (311)

Finish BL BZ DDB DNA GN GR SND STG TVG WH CF

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

LITHONIA FL UORESCENT HYDREL FLUORESCENT

NOTES: OPERATION: When the normal supply of AC power fails, the 8100 EO instantly switches to the emergency mode, keeping two compact fluorescent lamps illuminated for a minimum of 90 minutes. When AC power is restored, the emergency system returns to the normal mode. Ambient temperature -20°C to + 55°C with optional ICE technology. See www.hydrel.com for EO/AC options.

PSG9

FL OODLIGHTING FLOODLIGHTING

Intended Use

607

FL OODLIGHTING FLOODLIGHTING

Performance Floodlight

Intended Use

8200

The 8200 Series is a high-performance precision lighting system that provides consistent styling with a variety of light distributions. Multiple optical systems provide a wide range of precise light control. For use in façade, area and pathway lighting. Material

Lens

Die-cast, copper-free aluminum (A360) housing and doors.

Flat tempered glass for maximum resistance to impact and thermal shock.

Lamp

Mounting

ED18, ED28 or T15 HID to 400-watt maximum. Mogul or E40 sockets.

AWM: Cast aluminum wall mount plate for mounting over 4-0/4-S recessed J-Box. 15° up/down adjustment. AWMDE: Surface conduit direct entry available for throughbranch wiring, 3/4" NPT drilling standard. PM: Steel mounting plates for attachment to pole using a unique block/receiver assembly. The block bolts to a pole and engages the

Reflector High purity anodized specular, semispecular or patterned lighting sheet in various configurations to provide optimum optical performance and uniformity.

receiver within the 8200 integral arm. A single threaded locking fastener secures the fixture to the pole. YM: 1-1/ 2" wide aluminum yoke and stainless steel locking hardware allows fixture head to be easily aimed and fixed in place. Fixtures are provided with a minimum of 10 ft of 18/3 ST-W cord for power supply. High power factor magnetic core and coil standard. Electronic ballast optional.

Product

Lamp type

Voltage

Distribution

8200

Metal halide 200M1 250M 250MT1,2 320M1 320MT1,2 350M1 350MT1,2 400ME 400MT1,2 High pressure sodium 250S 400S

120 208 240 277 347 120/277 TB MVOLT3

Floodlights4 SP Spot NFL Narrow flood MFL Medium flood FL Flood WFL Wide flood HSP Horizontal spot VFL Vertical flood HFL Horzontal flood Area lights SR2 IES Type II SR3 IES Type III SR4SC IES Type IV SR5S IES Type V

Mounting

Accessories

1.45

Weight Listings U.L., C.U.L., IP67.

Adj. wall mount AWMDE Adj. wall mount, direct entry YM Yoke mount PMEF Pole mount flat, square pole PME3 Pole mount 3" diameter, round pole PME4 Pole mount 4" diameter, round pole

20-3/4 (527)

D.E. (direct entry) 13-1/2 (343)

5-1/8 (130)

D.E. (direct entry)

YM 7-3/8 (187)

PM 13-1/2 (206) 15-1/2 (394)

20-1/16 (527)

7-3/8 (187)

www.hydrel.com

Finish BL BZ DDB DNA GN GR SND STG TVG

Options

5-1/8 (130)

15 (394)

LPI Lamp included

Photo control PE Photo cell Fusing SF Single fuse8 DF Double fuse9 Ballast GEB Generic electronic ballast10 SCWA Super CWA pulse start11

AWM 15-1/2 (349)

Lamp

Internal ISS Internal source shield5 CFAMB Color filter amber CFRED Color filter red CFBLU Color filter blue CFGRN Color filter green External6 BD Barn doors FGS Full glare shield HGS Half glare shield HS House side shield7 WRG Wire rock guard

AWM

Mounting accessories

HYDREL

EPA

Example: 8200 250M 120 SR2 AWM HS LPI SND

See page 610.

608

Textured TGIC powder coat polyester finish (see ordering guide for available colors).

29.5 max.

Ballast

Ordering Information

Finish

22-3/4 (578) 17-3/4 (311)

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green WH White CF Custom

NOTES: 1 SCWA required with 200M, 320M, 350M, 250MT, 320MT, 350MT and 400MT lamps. 2 T15 lamps not available with HSP, HFL, and VFL. 3 MVOLT for 250M-400M is 208-277V only. 4 Flood distributions not available with PMEF, PME3 and PME4 mountings. 5 ISS comes standard on the VFL and SR4SC distributions. ISS is not available with FL, HFL, WFL, SR2, SR3 and SR5S distributions. 6 Accessories are mutually exclusive. Choose one. 7 HS available with SR2 and SR3 distributions only. 8 SF is available with 120V, 277V or 347V on HID only. 9 DF is available with 208V, 220V or 240V on HID only. 10 Electronic ballasts are only available with metal halide lamps 250 – 400W, 208-277V only. 11 SCWA ballasts are only available with metal halide lamps.

PSG9

Performance Floodlight Accessories

BD

Barn doors Four door set, each door mounts independently.

HS

House side shield Cuts nuisance glare.

FGS

Accessories

Full glare shield 360° full cutoff.

ISS

Internal source shield Eliminates lamp source glare.

HGS

Half glare shield Cuts upward glare.

WRG

FL OODLIGHTING FLOODLIGHTING

All Hydrel accessories are manufactured using the highest quality materials.

Wire guard Additional safety protection.

LITHONIA FL UORESCENT HYDREL FLUORESCENT

PSG9

www.hydrel.com

609

PATS Pole arm twin square1,2

■ ■

■ ■

■1 ■1

■1 ■1

■ ■

■ ■

■ ■

■1 ■1

■ ■



■ ■

■ ■

■ ■

■ ■

■1 ■1

■1 ■1

■ ■

■1 ■1

■ ■

■ ■

■ ■

■ ■

■1 ■1

■1 ■1

SMBR SMB remote mount

PATR Pole arm twin round2

■ ■

SMBTNM SMB tenon mount

PAS Pole arm square2

■ ■

SMBPMT SMB pole mount tee

PAR Pole arm round2

■ ■

SMBSMT SMB stanchion tee mount

EWM Extended wall mount2

■1 ■1

SMBSMSA SMB stanchion mount

TRJB Tree mount junction box

■ ■

SMBEWM SMB extended wall mount

SMSA Stanchion mount2

■ ■

SMB SMB ballast1

PMT Pole mount tee

■ ■

TNM Tenon mount

PMSA Pole mount

HYDSMDB Stanchion mount direct burial

FJB Flush mount junction box

7000 Series Adjustable KM Knuckle Mount YM Yoke Mount 7100 Series Adjustable KM Knuckle Mount YM Yoke Mount Fixed WMS/WUS Wall Mount Side Down/Up CM Ceiling Mount 7200 Series 400-watt Adjustable KM Knuckle Mount YM Yoke Mount 7200 Series 1000-watt Adjustable KM Knuckle Mount YM Yoke Mount 8100 Series Adjustable YM Yoke Mount AWM/AWMDE Adjustable Wall Mount Fixed PMEF, PME3, PME4 Pole Mount 8200 Series Adjustable Yoke Mount YM AWM/AWMDE Adjustable Wall Mount Fixed PMEF, PME3, PME4 Pole Mount

ARJB Architectural junction box

Flood M oun ting Moun ounting O ptions

No mounting accessories available

FL OODLIGHTING FLOODLIGHTING

Architectural & Performance Flood Mounting

■ ■

■ ■

■ ■

■1 ■1

■1 ■1

■ ■

■ ■

■ ■

■ ■







■1





■1



■ ■











■1

■1







■1

■1

■ ■

■ ■ ■

HYDREL

NOTES: 1 Two fixtures per mounting. 2 Multiple lengths available, consult specification sheets.

610

www.hydrel.com

PSG9

Building Mounted

HP3

Ideal for schools, parking garages, walkways, airports and stadiums.

Housing

Lens, Door

Lamp

Mounting

One-piece aluminum die-casting having knockouts for 4-0 box entry or independent surface mounting integrated. Accessories include a cast aluminum splice box for direct conduit entry. This unit also is suitable for pole-, pendant- or basemounted applications.

Molded from clear, UV stabilized polycarbonate for maximum impact resistance. The lens door seals with silicone gaskets providing bug and water tightness. The door is affixed to the housing with four stainless steel tamper-proof fasteners.

Metal halide or high pressure sodium to 150W max.

To surface mount over recessed 4-0 box, or with recessed post, base or direct conduit. Also available as pendant mounted.

Socket Medium screw base.

Listings

Ballast Magnetic, high power factor minimum starting temperature is -20°F (-29°C).

U.L., CSA, suitable for wet locations.

Ordering Information

Product HP3

Lamp type Metal halide 50M 70M 100M 150M 1 High pressure sodium 50S 70S 100S 150S1

Example: HP3 150M 120 HFW SDE SF LPI BL

Distribution

Voltage 120 208 240 277 347 120/277 TB TBV

HFW LHW LFW LLW LRW HSC

HNC HAC

Mounting

High forward wall Low horizontal wall Low forward wall Low left wall Low right wall High symmetrical ceiling High narrow ceiling High asymmetrical ceiling

Options

BMS Base mount, single PFD Plaster frame, direct entry PFS Plaster frame, splice box PMS Pole, single RDE Recessed, direct entry RSB Recessed, splice box SDE Surface, direct entry SNB Surface, no box SPM Pendant, single SSB Surface, splice box

Single fuse2

SF DF Double fuse3 PER Photo control receptacle1,4 QRS Quartz emergency restrike

2 1/4 (57)

PSG9

11-3/8 (288)

7 (177)

6-1/4 (159)

Recessed 4-0 box (by others)

For dimensions on other mounting options, see www.hydrel.com

www.hydrel.com

LPI Lamp included

Finish BL BZ DDB DNA GN GR SND STG TVG WH CF

Two (2) 1/4” mounting holes for wall anchor bolts (bolts by others)

9 (228)

Lamp

Cast knockouts for 4-0 box mounting

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

LITHONIA FL UORESCENT HYDREL FLUORESCENT

12-3/8 (313) NOTES: 1 Not available with RSB and RDE mounting. 2 SF only available with 120V, 277V or 347 V, HID only. 3 DF is available with 208V or 240V, HID only. 4 NEMA twist-lock receptacle only. Photo control by others.

SITE LIGHTING

Intended Use

611

SITE LIGHTING

Building Mounted

Intended Use

HP4

Ideal for schools, parking garages, walkways, airports and stadiums.

Housing

Lamp

Lens

One piece, aluminum die-cast housing with integral knockouts for 40 box entry or independent surface mounting. Accessories include cast aluminum splice box for direct conduit entry. This unit also is suitable for pole-, post-, pendant- or base-mounted applications.

Metal halide or high pressure sodium to 250W max.

Unit is provided with a vandalresistant prismatic lens door. This clear polycarbonate lens creates a 180° lateral spread. Flat polycarbonate or tempered glass lens also available. The door seals with silicone gaskets preventing water or bug entry. Two tamper-proof fasteners

Socket Mogul screw base.

Ballast Magnetic high power factor. Starting temperature is -20°F (-29°C).

Ordering Information

Product HP4

hinge on stainless steel hardware. The door is easily removed for easy installation, maintenance and relamping.

Listings U.L., CSA, suitable for wet locations.

Example: HP4 250M 120 SNB SF LPI BL

Lamp type

Voltage

Metal halide 175M 200M1,2 250M 1 High pressure sodium 100S 150S 250S1

120 208 240 277 347 120/277 TB TBV

Mounting

Optional lenses3 FLG Flat lens tempered glass4 FLP Flat lens polycarbonate5

BMS PMS RSB SNB SPM SSB

Base mount, single Pole mount, single Recessed, splice box Surface, no box Pendant, single Surface, splice box

Options

Lamp

SF Single fuse6 DF Double fuse7 PER Photo cell receptacle1,8 QRS Quartz re-strike SCWA Super constant wattage ballast9

LPI Lamp included

Finish BL BZ DDB DNA GN GR SND STG TVG WH CF

16-3/8 (415)

Four (4) 1/4” mounting holes for wall anchor bolts (bolts by others) 12 (304)

11-3/8 (288)

3-5/8 (92)

HYDREL

15-5/8 (397)

612

Recessed 4-0 box (by others) 6-7/8 (112)

For dimensions on other mounting options, see www.hydrel.com

www.hydrel.com

Cast knockouts for 4-0 box mountings

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

NOTES: 1 Not available with RSB mounting. 2 Requires SCWA ballast. 3 Will be used in place of standard lens. 4 175W maximum, reflector is not adjustable with this lens. 5 150W maximum, reflector is not adjustable with this lens. 6 SF only is available with 120V, 277V or 347V on HID only. 7 DF only is available with 208V or 240V on HID only. 8 NEMA twist-lock receptacle only. Photo control by others. 9 Only available on metal halide lamps.

PSG9

Bollard

3110 3120 3130 3140

The 3100 Series bollard is a low-level area lighting luminaire, for use in walkways, plazas or pedestrian areas.

Material Copper-free aluminum A360.

E17/elliptical Low pressure sodium: T16, BY22d base.

Lamp

Voltage

Fluorescent: 42W max. Triple tube. HID: 70W max. G12, 100W max.

See ordering guide.

Ballast

Fasteners

Integrally mounted core and coil electronic ballast with low starting temperature.

Stainless steel.

Listings U.L., C.U.L., IP65, suitable for wet locations.

Ordering Information

Example: 3130 36 100M MVOLT SYM GEB LPIC DNA

Product

Overall height

Lamp type

Voltage

Distribution

3110 3120 3130 3140

36 42

Incandescent 100I Fluorescent 26DTT 32TRT 42TRT Metal halide 50M 70M 100M Ceramic metal halide 35CMT4 70CMT4 35CMT6 70CMT6 High pressure sodium 50S 70S 100S Low pressure sodium 18L 35L

120 208 240 277 347 120/277 MVOLT1 TB

SYM Symmetric FT Forward throw

3110

Options Fusing SF DF Ballast GEB MLEBAD GFCI EL N

Lamp LPI Lamp included LPIC Lamp included (coated)5

Single fuse2 Double fuse2

Generic electronic ballast3 Electronic dimming ballast4 Receptacle Emergency battery backup (fluorescent lamp only), half output EL H Emergency battery backup (fluorescent lamp only), full output

3120

3130

Top

Top 8 8

9" Dia.

9" Dia.

8 8

41-1/2 (1054)

41-1/2 (1054)

6 (152) 2-5/8 (66.7)

6 (152) 2-5/8 (66.7)

2-5/8 (66.7)

2-5/8 (66.7)

8 (203)

41 (1041)

41 (1041)

6 (152)

6 (152)

8 (203)

8 (203)

www.hydrel.com

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

3140 Top

NOTES: 1 MVOLT is standard on all fluorescent lamps or metal halide lamps with GEB or electronic ballasts. 2 SF only valid with 120V, 277V or 347V. DF only valid with 208V or 240V. 3 Only available with metal halide lamps and MVOLT voltage. 4 0-10V dimmer not included by others. 5 LPIC only valid with 50M, 70M, 100M, 50S, 70S, 100S, 100I.

Finish BL BZ DDB DNA GN GR SND STG TVG WH CF

8 (203)

LITHONIA FL UORESCENT HYDREL FLUORESCENT

Top

PSG9

SITE LIGHTING

Intended Use

613

INGR ADE LIGHTING IN-GR GRADE

Performance In-grade

Intended Use

9000

The 9000 Series fixtures represent the state-of-the-art in flush uplight construction. These multipurpose modular units are designed for flush mounting in planting areas or in concrete, and are used for illuminating building façades, walls, trees and similar applications.

Door Material

resistant for use in all types of environments.

Cast aluminum or cast bronze that locks the lamp housing into the rough-in section with two tamperproof fasteners.

Lamp Module Housing Stainless steel, sealed and purged of all moisture to 100°F (38°C). Electrical access to lamp module is done through submersible rated connector. Thermally protected.

Rough-In Section Injection molded ABS, U.V. stabilized, impact and corrosion

Power Module

Conduit Entries

Sealed unit encapsulated in an engineered composite resin to eliminate all water entry.

1/2" NPT openings are available in the cast aluminum integral junction box. Suitable for through-branch wiring. This box has 17in3 of volume.

Lamp Types MR-16, PAR and R lamps with medium bases to 75W max. Lamp included.

Ordering Information

Product 9000 9050

Material A Aluminum B Bronze

Lamp type

Distribution 3

Voltage 1

Low voltage M20 M35 M50 M75 P3636ILV P3650ILV P3675ILV Incandescent2 P1660I P1675I P2050I P3075I

12 120

VNSP Very narrow spot NSP Narrow spot SP Spot NFL Narrow flood FL Flood WFL Wide flood

Lens

Conduit entry

Accessories

Lamp

CLC Convex lens clear CLF Convex lens frosted FLC Flat lens clear FLC5 Flat lens clear, 5° axial spread FLC10 Flat lens clear, 10° tilt FLF Flat lens frosted

12B 1/2” NPT bottom 34B 3/4” NPT bottom

Internal IHL Internal honeycomb louver MSR Modular support ring External4 GS Glare shield RG Rock guard5 Trims and rings4 BTR Bronze trim round6 BTS Bronze trim square7 STR Stainless trim round6 PRR Protective ring round6 PRS Protective ring square7

LP Lamp installed

VWFL Very wide flood

9050

8 (203)

9000 Incandescent low voltage (no transformer)

HYDREL

U.L., CSA., IP67.

Example: 9000 B M50 120 FL FLC 12B RG

Low voltage (with transformer)

614

Listings

9-1/2 (241)

8 (203)

Finish BL BZ DDB DNA GN GR SND STG TVG WH CF

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

NOTES: 1 If 12V is selected, transformer will not be provided. 2 Only available in 120V. 3 All distributions are not available with all lamp types. 4 Accessories are mutually exclusive. Choose one. 5 RG not valid with CLC or CLF lens. 6 Only available with 9000. 7 Only available with 9050.

13-1/2 (343)

www.hydrel.com

PSG9

Performance In-grade

M9400

The M9400 Series modular in-grade lights are multi-purpose units designed for flush mounting in a variety of substrates or materials. The M9400 fixtues are used to uplight architectural and landscape features. Door Finish Cast aluminum, cast bronze, cast bronze with stainless perforated trim insert or stainless steel. Round or square with two stainless steel captive fasteners that lock the lamp module into the rough-in section.

Rough-In Section Injection molded polymer with integral junction box for branch wiring (410 ccm - 25 in3), U.V. stabilized, impact and corrosion resistant for use in all types of environments. Houses power module, lamp modules and finishing

components. Adjustment ring provides 360° aim rotation with keyed section to receive lamp module. Ring locks into position with stainless steel fasteners. RIS has a cylinder/vault configuration.

Lamp Module Stainless steel, sealed and purged of all moisture with silicone gaskets, stainless steel clamp band and single fastener. Electrical connection to lamp module is done through submersible connector with goldplated contacts. Lamp included.

Double Lens Includes 360° Aim-Lock™ module support ring, door assembly, tilt ring, and module indexing segment providing maintenance and relamping without re-aiming. The lamp module is suspended below the door lens in a surface adjustable, 15° tilt mechanism. The insulating air layer reduces surface temperatures. The lenses are clear tempered flat glass.

Power Module

Product M9410 Round single lens M9420 Round double lens M9430 Square single lens M9440 Square double lens

Material A Aluminum B Bronze ASP Aluminum with stainless perforation1 BSP Bronze with stainless perforation1 BBP Bronze with brass perforation1 SS Stainless steel

PSG9

Two 1/2”, 3/4", 1" NPT bottom openings. Box suitable for throughbranch wiring. Splicing volume is 25 in3 (410 ccm). U.L., C.U.L., IP68.

Example: M9420 BSP 70CMT6 MVOLT SP FLC 34B ISS RG GEB LP

Lamp type Low

voltage2

Distribution 5

Lens

VNSP Very narrow spot NSP Narrow spot6 SP Spot MFL Medium flood6 NFL Narrow flood FL Flood WFL Wide flood VWFL Very wide flood WWD Wall wash distribution7 ASY Asymmetrical8

CLC Convex lens clear CLF Convex lens frosted FLC Flat lens clear FLC5 Flat lens clear, 5° axial spread FLC10 Flat lens clear, 10° tilt FLC20 Flat lens clear, 20° tilt FLCAS Flat lens clear, anti-slip FLF Flat lens frosted

Voltage

12 120 M35 M50 208 240 M75 P3650ILV 277 P3675ILV 347 Incandescent3 MVOLT4 P1675I P2050I P3075I 75Q 100Q Fluorescent 18TRT 26TRT 32TRT Ceramic metal halide 35CMT4 35CMT6 70CMT4 70CMT6 P2035CM P3035CM P3070CM

11 Accessories are mutually exclusive, not available with SS door. Only RG and GS can be ordered together. 12 RG is not valid with CLC or CLF lenses. 13 SF available with 120V, 277V or 347V and HID only. 14 DF available with 208V, 220V or 240V and HID only. 15 Only available with HID lamps and MVOLT voltage. 16 Standard on CMT4 lamps. 17 For use with 0-10V analog dimmer (by others). Additional electrical conductors are required. Consult Hydrel for details. 18 Standard finish is unpainted unless specified; only available on aluminum doors.

Accessories

Conduit entry

M9410

12B 12S 34B 34S 1B

1/2” NPT bottom 1/2” NPT side 3/4” NPT bottom 3/4” NPT side 1” NPT bottom

9 (229)

M9430

15-9/10 (405)

15-9/10 (405)

Incandescent, low voltage (no transformer) 12-1/5 (310) 14-2/5 (365) 19-2/5 (494)

19-2/5 (494)

HID, fluorescent, low voltage (with transformer)

www.hydrel.com

Finish18

Internal LP Lamp BL inIHL Internal honeycomb BZ stalled louver DDB 9 ISS Internal source shield DNA LSF Linear spread filter CFAMB Color filter amber GN CFBLU Color filter blue GR CFGRN Color filter green SND CFRED Color filter red STG WWL Wall wash louver10 TVG 11 External GS Glare shield WH LC Polycarbonate CF protective cover LS Light shield Options RG Rock guard12 Trims11 Fusing BTR Bronze trim round SF Single fuse13 BTS Bronze trim square DF Double fuse14 STR Stainless trim round Ballast15 STS Stainless trim square GEB Electronic ballast16 MLEBAD Electronic dimming 9 (229) ballast17

M9440

M9420

Lamp

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

LITHONIA FL UORESCENT HYDREL FLUORESCENT

NOTES: 1 Not available with M9430 and M9440. 2 If 12V is selected, transformer will not be provided. 3 Only available in 120V. 4 MVOLT is only available with fluorescent and metal halide lamps with electronic ballasts. 5 All distribution not available with all lamp types. 6 Only available with T4, T6 and fluorescent lamps. 7 Only available with T4 and fluorescent lamps. 8 Only available with fluorescent lamps. 9 Not available with PAR, MR or fluorescent lamps. 10 Only valid with WWD distribution.

Electrical Entries/Junction Box

Listings

Ballast is encapsulated in a customheat dissipating epoxy resin to

Ordering Information

eliminate all moisture intrusion to the ballast. Provided with submersible rated cord/connector for connection to integral junction box and lamp module. HID ballasts are magnetic.

INGR ADE LIGHTING IN-GR GRADE

Intended Use

615

INGR ADE LIGHTING IN-GR GRADE

Performance In-grade

Intended Use

M9700

Hydrel’s M9700 Series modular in-grade lights are multi-purpose units designed for uplighting of architectural and landscape features. These units can be flush mounted into a variety of substrates or landscape materials. Door Material

finishing section.

Cast aluminum, cast bronze, cast aluminum or bronze with stainless perforated trim insert or stainless steel. Available in round or square door trim.

Lamp Module Stainless steel housing, factorysealed and purged of all moisture for longer component life. Lens is sealed with silicone gasket and stainless steel clamp band assembly with single fastener. Electrical connection to lamp module is done through a submersible quick-pull plug connector with gold-plated contacts. Standard unit is thermally protected. Lamp included.

Rough-In Section Injection molded polymer with integral junction box for throughbranch wiring. The housing is U.V. stabilized, impact and corrosion resistant for use in all types of environments. The rough-in section has a cylinder/vault configuration and houses the lamp and power module components and top door

Finishing Section Single lens design includes door

Ordering Information

Product M9710 Round single lens M9720 Round double lens M9730 Square single lens M9740 Square double lens

Material A B SS ASP

BBP BSP

AAS

ASS

BBS

HYDREL

BSS

616

Aluminum Bronze Stainless steel Aluminum w/ stainless perforation1 Bronze w/brass perforation1 Bronze w/ stainless1 perforation Aluminum door w/aluminum trim, solid1,2 Aluminum door w/stainless steel trim, solid1,2 Bronze door w/ bronze trim, solid1,2 Bronze door w/ stainless steel trim, solid1,2

assembly with 360° Aim-LockTM lamp module support ring. Module indexing provides easy maintenance and relamping without re-aiming. Active optical lenses are also available. Door trim locks into position with two stainless steel captive, tamper-resistant fasteners.

Power Module Ballast is encapsulated in a custom designed heat-dissipating epoxy resin that also eliminates all moisture intrusion to the ballast. Module is provided with submersible rated cord leads for connection to integral junction box and lamp module.

Standard ballast is high power factor; fluorescent electronic or HID magnetic.

Conduit Entries Two (2) bottom or side entries available. Box suitable for throughbranch wiring. Splicing volume is 25 in3 (410 ccm).

Finish Finish is natural aluminum or bronze. Stainless steel door is brushed finish. Aluminum doors may be painted. See ordering guide.

Listings U.L., C.U.L., IP68.

Example: M9710 B 150CMT6 120 NSP FLC 34B ISS GS LP

Lamp type

Voltage

Distribution

Incandescent P38100I P38150I P38250I 100Q 150Q 250Q Fluorescent 18TRT 26TRT 32TRT 42TRT Metal halide 100M 150M 175M P3870M P38100M P38150M Ceramic metal halide 70CMT6 150CMT6 70CM 100CM 150CM P3870CM P38100CM High pressure sodium 70S 70S 100S 150S

120 208 240 277 347 MVOLT 3

NSP Narrow spot SP Spot NFL Narrow flood MFL Medium flood FL Flood WFL Wide flood WWD Wall wash distribution4

Conduit entry 12B 12S 34B 34S

Accessories

1/2” NPT bottom 1/2” NPT side 3/4” NPT bottom 3/4” NPT side Lens

CLC Convex lens clear CLF Convex lens frosted FLC Flat lens clear FLC5 Flat lens clear, 5° axial spread5 FLC10 Flat lens clear, 10° tilt FLC20 Flat lens clear, 20° tilt FLCAS Flat lens clear, anti-slip FLF Flat lens frosted FLF5 Flat lens frosted, 5° axial spread4 12 (305)

12 (305)

20 (508)

HID, Fluorescent

16 (407)

Options

Lamp

LP Lamp Internal Fusing installed IHL Internal SF Single honeycomb louver fuse13 ISS Internal source DF Double shield6 fuse14 LSF Linear spread Finish17 Ballast15 CFAMB Color filter amber GEB ElecBL Black CFBLU Color filter blue tronic BZ Bronze CFGRN Color filter green ballast DDB Dark CFRED Color filter red MLEBAD Elec7 bronze WWL Wall wash louver tronic External8 DNA Natural dimGS Glare shield aluminum ming LC Polycarbonate GN Green 16 ballast protective cover9 GR Gray LS Light shield SND Sand RG Rock guard10 STG Steel gray Trims8 TVG Terra verde BTR Bronze trim green round11 WH White BTS Bronze trim CF Custom square12 STR Stainless trim round11 6 ISS not available with PAR or fluorescent STS Stainless trim lamps, or WWD distribution. square12 7 Not available with PAR lamps. Rings and masks 8 Not available with SS material. Accessories PRR Protective ring are mutally exclusive. Choose one. round11 9 LC not available for M9710, M9730. PRS Protective ring 10 RG not available with CLC or CLF convex lens. square12 11 Available with M9710, M9720 only. GM Grout mask

NOTES: 1 Not available with M9730, M9740 models. Available with unpainted finish only. 2 Available to 100W max only. 3 Standard on fluorescent and metal halide lamps with electronic ballast option. 4 FLF5 lens recommended for 70W HID and lower. FLC5 lens recommended for 100W HID and higher. 5 Default lens for WWD distribution quartz, fluorescent, and 100W HID and higher.

12 13 14 15

Available with M9730, M9740 only. SF available with 120V, 277V or 347V HID only. DF vailable with 208V, 220V or 240V HID only. Available with MVOLT (120V-277V) voltage only for metal halide lamps to 150W maximum. 16 For use with O-10V analog dimmer (by others). Additional electrical conductors are required. Consult Hydrel for details. 17 Standard finish is unpainted unless specified, only available on aluminum doors.

Incandescent

www.hydrel.com

PSG9

Performance In-grade Accessories

BTR Bronze trim ring

INGR ADE LIGHTING IN-GR GRADE

Installation Accessories

Safety Accessories

STR Stainless trim ring

RG Rock guard, bronze or aluminum

LC Polycarbonate protective cover

Light Control Accessories

IHL Internal honycomb louver

WWL Wall wash louver

ISS Internal source shield

FLC5 5° Axial spread lens

FLC10 10° tilt lens

FLC20 20° tilt lens

BSP Perforated door – stainless perforations on bronze

ASP Perforated door –stainless perforations on aluminum

A Aluminum door

B Bronze door

GS Glare shield, bronze or aluminum

Door Material Options

PSG9

www.hydrel.com

SS Stainless steel door

LITHONIA FL UORESCENT HYDREL FLUORESCENT

BBP Perforated door – brass perforations on bronze

617

INGR ADE LIGHTING IN-GR GRADE

Performance In-grade

Intended Use

6410

This multi-purpose fixture is designed for surface or flush mounting in planting areas and is ideal for lighting walls, building façades, trees and similar applications where a controlled light source is desirable.

Fixture

Voltage

Cast aluminum or cast bronze.

12V standard.

#14-2 cable. Side entry. Cord length must be specified.

Lamp

Electrical

Lens

MR-16 with bi-pin socket, 50W max.

Supplied with a minimum of 10 ft of

Flat, clear tempered glass.

Ordering Information

Product 6410

Material A Aluminum B Bronze

Listings U.L., CSA, suitable for wet locations.

Example: 6410 B M50 12 VNSP FLC CSL50 IHL LPI

Lamp type M20 M35 M50

Voltage 1

12

Distribution2 VNSP NSP SP NFL FL WFL

Very narrow spot Narrow spot Spot Narrow flood Flood Wide flood

Lens

Cord set length

Accessories

Lamp

FLC Flat lens clear

CSL__ 10’-50’ in 5’ increments

Internal IHL Internal honeycomb louver External BTR Bronze trim ring ATR Aluminum trim ring

LPI Lamp included

FLCS Flat lens clear, 5° axial spread

Finish BL BZ DDB DNA GN GR SND STG TVG WH CF

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

NOTES: 1 Transformer sold separately. 2 Only valid if LPI is chosen. Not all distributions available with all lamp types.

HYDREL

5-1/4"

618

4-3/4" 5-1/2"

www.hydrel.com

PSG9

Performance In-grade

6700

The 6700 Series sealed outdoor lighting fixture offers high performance and durability in an ingrade fixture. Many lamping options and distributions are available including HID lamps to 175W. Integral ballast and junction box add further to the Series’ reliability.

Material

Ballast

Listings

Integrally mounted ballast, rated for low starting temperatures.

U.L., C.U.L., IP67.

Heavy wall cast bronze body and door.

performance and uniformity. Lamps or reflectors are adjustable.

Reflector

Lens

(Non-reflectorized lamps): High purity anodized specular or semispecular materials in various distributions provide maximum

Tempered clear flat borosilicate glass.

Finish

Conduit Entries

Raw bronze.

Two 1/2" or 3/4" NPT entries available bottom or side.

Ordering Information

Example: 6700 B 70CMT6 MVOLT NSP FLC 34B IHL GEB LP

Material

Lamp type

Voltage

Lens

6700

B Bronze

Incandescent1 P38100I P38150I 100Q 250Q Fluorescent2 18TRT 26TRT 32TRT 42TRT Metal halide 100M 150M 175M P3870M P38100M Ceramic metal halide 70CMT6 150CMT6 70CM 100CM 150CM P3870CM P38100CM High pressure sodium 70S 70S 100S 150S

12 120 208 240 277 347 MVOLT3

CLC Convex lens clear CLF Convex lens frosted FLC Flat lens clear FLC5 Flat lens clear, 5° axial spread FLC10 Flat lens clear, 10° tilt FLC20 Flat lens clear, 20° tilt FLCAS Flat lens clear, anti-slip FLF Flat lens frosted

Distribution NSP SP NFL MFL FL WFL WWD

Narrow spot4 Spot5 Narrow flood Medium flood Flood5 Wide flood5 Wall wash distribution

NOTES: 1 Incandescent models available with 120V only. 2 Fluorescent models available with 347V or MVOLT (120-277V) only. 3 Standard on fluorescent lamps and metal halide lamps with GEB ballasts. 4 NSP only available with T4 or T6 lamps. 5 Not available with T6 lamps. 6 ISS not available with WWD distribution or P38 lamp type. 7 Only available with wall wash distribution (WWD). 8 Accessories are mutually exclusive. Choose one. 9 RG not available with CLC or CLF lenses. 10 SF only is available with 120V, 277V or 347V on HID only. 11 DF only is available with 208V or 240V on HID only. 12 Electronic ballasts only are available with metal halide lamps and MVOLT voltage.

Conduit entry 12B 12S 34B 34S

1/2” NPT bottom 1/2” NPT side 3/4” NPT bottom 3/4” NPT side

13-3/4 (348) 10-1/2 (267)

18-1/8 (460)

1/4 (6.4)

9-1/4 (235)

www.hydrel.com

Accessories

Options

Lamp

Internal IHL Internal honeycomb louver ISS Internal source shield6 LSF Linear spread filter CFAMB Color filter amber CFBLU Color filter blue CFGRN Color filter green CFRED Color filter red WWL Wall wash louver7 External8 GS Glare shield LS Light shield RG Rock guard9 Trims BTR Bronze trim round STR Stainless trim round Masks GM Grout mask

Fusing SF Single fuse10 DF Double fuse11 Ballast12 GEB Electronic ballast

LP Lamp installed

LITHONIA FL UORESCENT HYDREL FLUORESCENT

Product

PSG9

INGR ADE LIGHTING IN-GR GRADE

Intended Use

619

INGR ADE LIGHTING IN-GR GRADE

Well Lighting

Intended Use

9310

The 9310 Series is designed for flush mounting in planters and open lawn areas.

Material

Lamp Housing

Lamp Type

Listings

Grill: cast aluminum painted or cast bronze natural finish. Well: thick wall A.B.S. pipe.

Cast aluminum or bronze body with fins for heat dissipation.

Incandescent: 50W max. PAR20.

U.L., CSA.

Conduit Entries Inter-connecting conduit shall be 1/2” galvanized pipe, with brass cord seal.

Ordering Information

Product 9310

Material A Aluminum B Bronze

Example: 9310 B M50 120 NSP 34B LC LP

Lamp type Low voltage M20 M35 M50 Incandescent P2035I P2050I Ceramic metal halide1 20CMT4 35CMT4 P2035CM

Distribution4

Voltage 2

12 120 208 220 240 277 347 MVOLT3

NSP Narrow spot SP Spot NFL Narrow flood FL Flood MFL Medium flood WFL Wide flood

Conduit entry

Accessories

12B 1/2” NPT bottom 34B 3/4” NPT bottom

7 GRILL (178)

GEB Electronic ballast5

LP Lamp installed

Finish6 BL Black BZ Bronze DDB Dark bronze DNA Natural aluminum GN Green GR Gray SND Sand STG Steel gray TVG Terra verde green WH White CF Custom

7 GRILL (178)

7 (178) 4-1/2 (114)

7 (178) 4-1/2 (114)

10 (254)

HYDREL

Lamp

9310 HID, low voltage (with transformer)

9310 Incandescent, low voltage (no transformer)

620

LC Lexan cover

Options

20 (508)

www.hydrel.com

NOTES: 1 Requires GEB ballast option. 2 Transformer sold separately. 3 MVOLT is standard on all metal halide lamps. 4 Not all distributions available on all lamp types. T4 lamps only available with SP and MFL distribution. 5 Electronic ballasts are only available with metal halide lamps and MVOLT voltage. 6 Finish available on aluminum.

PSG9

Well Lighting

9330 9335

The 9330 Series is designed for flush mounting in planter, tree grates or open lawn areas. The 9335 Series is designed for mounting in standard Neenah tree grates.

Grill

Well

Lens

Conduit Entries/J-Box

Cast aluminum or bronze – locks to well with two set screws. Full eggcrate louver or directional eggcrate louver square grills and directional louver or clear polycarbonate cover round grills are available. Eggcrate directional louvers provide 30° cut-off.

Thick wall polypropylene pipe.

Tempered glass lens. Convex lens clear (CLC) is standard. Convex lens frosted (CLF) also available.

Two 3/4" NPT openings in the bottom of the J - box. 25 in3 of volume suitable for through-branch wiring. Fixture/J-box connecting conduit is 1/2" galvanized pipe with brass cord seal.

Lamp Module Housing Stainless steel, sealed and purged of all moisture to 100°F (38°C) and mounted integral with grill. Angular adjustment up to 15°. Electrical access to lamp module is done through submersible rated connector. Thermally protected. Lamp included.

Power Module Sealed unit encapsulated in an engineered composite resin to eliminate all water entry.

9330 9335

Example: 9330 B P3070CM MVOLT SP CLC 34B DL ASR GEB LP

Depth ED

Lamp type

1

Material A Aluminum B Bronze

2

Voltage

Low voltage M20 M75 P3636ILV P3650ILV AR11175ILV Incandescent P2050I P3050I P3075I Ceramic metal halide 100CM P2035CM P3035CM P3070CM Metal halide 50M 70M 100M High pressure sodium 50S 70S 100S

3

12 120 2084 240 277 347 MVOLT5

Clear Polycarbonate Cover (CPC)

Distribution6

34B

3/4” NPT bottom

Lens

Grill

CLC Convex lens clear CLF Convex lens frosted

DEL Directional eggcrate louver (square)2 FEL Full eggcrate louver (square)2 DL Directional louver (round) CPC Clear polycarbonate2

Lamp LP Lamp installed

Finish10 BL BZ DDB DNA GN GR SND STG TVG WH CF

9-1/2 (241)

Directional Eggcrate Louver (DEL)

10-3/8 (270)

9-1/2 (241)

9335 HID

18-1/2 (470)

Options Fusing SF Single fuse7 DF Double fuse8 Ballast GEB Electronic ballast9

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

Full Eggcrate Louver (FEL)

9-1/2 (241)

9330 HID

Accessories ASR Aim set ring2 IHL Internal honeycomb louver

9330 Incandescent

18-1/2 (457)

10-3/8 (270)

20 (508)

8-1/4 (210) 8-3/4 (222)

www.hydrel.com

9335 Incandescent 1/2 (13)

10-3/8 (270)

20 (508)

10-1/2 (267)

10-1/2 (267)

LITHONIA FL UORESCENT HYDREL FLUORESCENT

PSG9

Directional Louver (DL)

Conduit entry

FL Flood SP Spot NFL Narrow flood WFL Wide flood NSP Narrow spot VWFL Very wide flood

9-1/2 (241)

NOTES: 1 ED option add 10” to well height. Not available with 9335. 2 Not available with 9335. 3 Transformer sold separately. 4 208V not available with low-voltage fixtures. 5 Standard on fluorescent and metal halide lamps with GEB ballast. 6 Not all distributions available with all lamp types. 7 SF available with 120V or 277V only. 8 DF available with 208V, 240V or 347V only. 9 Electronic ballasts are only available with metal halide lamps and MVOLT voltage. 10 Finish available on aluminum fixtures only.

Listings U.L., CSA, IP67.

Ordering Information

Product

INGR ADE LIGHTING IN-GR GRADE

Intended Use

621

INGR ADE LIGHTING IN-GR GRADE

Well Lighting

Intended Use

9350

Uplighting of trees, shrubs, terraces or walls from a flat lawn area. The units are completely weatherproof, designed for installation in damp areas.

Grill

Well

Lens

Conduit Entries/J-Box

Cast aluminum or bronze. Locks to well with two set screws. Full eggcrate louver or directional eggcrate louver square grills and directional louver or clear polycarbonate cover round grills are available. Eggcrate directional louvers provide 30° cut-off. Clear polycarbonate cover grill is 100W max.

Thick wall polypropylene pipe for higher wattages.

Tempered glass lens. Convex lens clear (CLC) is standard. Convex lens frosted (CLF) also available.

Two 3/4" NPT. 25 in3 of volume suitable for through-branch wiring. Fixture/J-box connecting conduit is 1/2" galvanized pipe with brass cord seal. IJB – internal junction boxes also are available.

Lamp Module Housing Stainless steel, sealed and purged of all moisture to 100°F (38°C) and mounted integral with grill. Angular adjustment up to 15°. Electrical access to lamp module is done through submersible rated connector. Thermally protected. Lamp included.

Ordering Information

Depth

Lamp type

9350

ED1

Quartz2 100Q 150Q 250Q Incandescent2 P38100I P38150I Ceramic metal halide 70CM 100CM 150CM P3870CM Metal halide 70M 100M P38100M 150M P38150M 175M High pressure sodium 70S 100S 150S

A Aluminum B Bronze

Sealed unit encapsulated in an engineered composite resin to eliminate all water entry. High power factor ballast.

Conduit entry

Distribution

ASR Aim set ring IHL Internal honeycomb louver

Voltage

Lens

Grill

120 208 240 277 347 MVOLT3

CLC Convex lens clear4 CLF Convex lens frosted

DEL Directional eggcrate louver (square) FEL Full eggcrate louver (square) DL Directional louver (round) CPC Clear polycarbonate cover (round)5

9350 Incandescent

20-1/2 (521)

HYDREL

U.L., C.E., CSA, IP67.

9350 HID

11-1/2 (292)

11-1/2 (292) 10 (254) 10-1/2 (267)

www.hydrel.com

IJB

Lamp LP Lamp installed

Finish10 BL BZ DDB DNA GN GR SND STG TVG WH CF

11-1/2 (292)

Directional Eggcrate Louver (DEL) 11-1/2 (292)

Internal junction box6

Fusing SF Single fuse7 DF Double fuse8 Ballast GEB Electronic ballast3,9

Full Eggcrate Louver (FEL)

Directional Louver (DL)

20 (508)

Options

Accessories

34B 3/4” NPT bottom

FL Flood SP Spot

Clear Polycarbonate Cover (CPC)

622

Listings

Example: 9350 A 100M 120 FL CLC 34B DEL ASR TVG

Product

Material

Power Module

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

NOTES: 1 ED option add 10” to standard well height. 2 Only available in 120V. 3 MVOLT is standard if GEB is selected on metal halide lamps. 4 CLC default if lens option not chosen. 5 100W max. 6 IJB is not available with ED option. 7 SF available with 120V, 277V or 347V only. 8 DF available with 208V or 240V only. 9 Electronic ballasts only are available with metal halide lamps. 10 Finish available on aluminum fixture only.

PSG9

Accent Lighting

2100

The 2100 Series is a compact, high-performance lighting fixture available with incandescent or HID lamp types. Several ideal distributions are offered for a wide variety of applications. The 2100 Series yoke-mounted unit also includes multiple mounting accessories.

Head

Material

Socket

Mounting

Listings

Rugged heavy wall cast aluminum body and hinged door. All fasteners are stainless steel.

Mini-can, screw shell or G12 base, bi-pin.

Yoke mount with a minimum of 10 ft 18/3 STW cord. Cord length must be specified.

U.L., C.U.L., suitable for wet locations.

Lens High strength curved, tempered glass.

Lamp Incandescent: T-4 mini-can to 250W max. Metal halide: T-6, G12 to 150W max.

Finish Textured TGIC powder coat polyester finish (see ordering guide for available colors.

Ordering Information

Example: 2100 70CMT6 120 RN YM RACB GS SF CSL10 LPI BL

Product

Lamp type

Voltage

Distribution

Mounting

2100

Incandescent1 100Q 150Q 250Q Ceramic metal halide2 35CMT6 70CMT6 150CMT6

120 208 240 277 347 120/277 MVOLT 3 TB

RN Rectangular narrow RM Rectangular medium RW Rectangular wide

YM Yoke mount

Mounting accessories See page 631.

Accessories External4 GS Half glare shield FGS Full glare shield VSR Visor

Options Fusing SF Single fuse5 DF Double fuse6 7 Ballast GEB Electronic ballast MLEBAD Electronic dimming ballast8

Cord set length

Finish

Lamp

CSL__ 10’-50’ of LPI Lamp cord included (available in 5’ increments)

BL BZ DDB DNA GN GR SND STG TVG WH CF

3-15/16 (100)

7-3/4 (197) 5-3/4 (146)

8-3/4 (222)

www.hydrel.com

5-1/2 (140)

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

LITHONIA FL UORESCENT HYDREL FLUORESCENT

NOTES: 1 Available in 120V only. 2 Requires HID ballast enclosure. 3 MVOLT is standard on all metal halide lamps with GEB ballast option. 4 Accessories are mutually exclusive. Choose one. 5 SF is available with 120V, 277V or 347V on HID only. 6 DF is available with 208V or 240V on HID only. 7 Only available with 35CMT6 and 70CMT6 with MVOLT voltage. 8 For use with 0-10V analog dimmer (by others). Additional electrical conductors are required.

PSG9

LANDSC APE LIGHTING LANDSCAPE

Intended Use

623

LANDSC APE LIGHTING LANDSCAPE

Accent Lighting

4511

Intended Use Low-profile accent light for shrubs, planters or wall mountings.

Head Material

Lamp

Lens

Listings

Housing is machined aluminum alloy. Knuckle is cast bronze.

Low voltage: MR-11, 35W max.

Tempered flat glass.

U.L., CSA, IP66, suitable for wet locations.

Mounting

Requires low voltage supply.

1/2" NPT adjustable knuckle.

Ordering Information

Product 4511

Lamp type

Example: 4511 M35 12 SP WMC LPI DNA

Voltage 1

Low voltage M35

12 1202 2772

5-3/8 (137)

No reflector Spot Narrow spot Flood Narrow flood Wide flood

1-15/16 (49)

Lamp

See page 631.

NOTES: 1 Transformer sold separately. 2 Only valid when tranfomer box is ordered. 3 Distribution only required with LPI option. All others choose NR.

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

Material

Lamp

Lens

Listings

Housing is die-cast, copper-free aluminum alloy A360. Knuckle is cast bronze.

Low voltage: MR-16 quartz halogen, 50W max.

Tempered flat glass.

U.L., CSA, IP66, suitable for wet locations.

Product 4516

Mounting

Requires low voltage supply.

1/2" NPT adjustable knuckle.

Lamp type

Example: 4516 M50 12 SP WMSA LPI DNA

Voltage 1

Low voltage M50

12 1202 2772

Distribution3 NR SP NSP FL NFL WFL

No reflector Spot Narrow spot Flood Narrow flood Wide flood

Mounting accessories

Lamp LPI Lamp included

See page 631.

3-3/16 (81) 2-3/4 (70)

HYDREL

BL BZ DDB DNA GN GR SND STG TVG WH CF

Low-profile accent light for shrubs, planters or wall mountings.

Ordering Information

624

Finish

LPI Lamp included

Intended Use

4516 Head

NR SP NSP FL NFL WFL

3-7/16 (87)

2-9/16 (65)

Mounting accessories

Distribution3

5-1/8 (130)

www.hydrel.com

Finish BL BZ DDB DNA GN GR SND STG TVG WH CF

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

NOTES: 1 Transformer sold separately. 2 Only valid if tranfomer box is ordered. 3 Distribution only required with LPI option. All others choose NR.

PSG9

Accent Lighting

4519

Spotlights architectural or landscape features from the ground, wall mountings or trees.

Head Material

Metal halide: PAR 38 to 150W max.

blue, green or red lenses available.

Listings

Cast aluminum with cast bronze knuckle.

Lens

Mounting

U.L., CSA, suitable for wet locations.

Incandescent: No lens. Lamp face forms lens on incandescent. HID: convex, clear tempered glass. Amber,

1/2" NPT adjustable knuckle.

Lamp Incandescent: PAR38 to 250W max.

4519

Lamp type

6-3/8 (166)

Fasteners Stainless steel.

Ordering Information

Product

9-1/4 (235)

LANDSC APE LIGHTING LANDSCAPE

Intended Use

2-1/2 (76)

Example: 4519 P38250I 120 SP JBA LPI DDB

Distribution4

Voltage

Mounting accessories

Lens5

1

Options

Finish

Incandescent 120 NR No reflector CLC Convex lens clear Fusing 208 P38100I SP Spot CLA Convex lens amber See page 631. SF Single fuse6 240 P38120I FL Flood CLB Convex lens blue DF Double fuse7 P38250I 277 WFL Wide flood CLG Convex lens green Ballast Ceramic metal halide2 347 CLR Convex lens red GEB Electronic ballast 120/277 P2035CM P3870CM MVOLT3 NOTES: 1 Available with 120V only. P38100CM TB Lamp Accessories 2 Separate ballast enclosure required for HID models. Metal halide2 LPI Lamp GS Glare 3 MVOLT is standard on metal halide lamps with GEB ballast P3870M included shield option. P38100M 4 Not all distrutions available with all lamp types, use NR P38150M when not using LPI option. 5 CLC will be used if no lens is chosen on HID. 6 SF is available with 120V or 277V on HID only. 7 DF is available with 208V, 220V or 240V on HID only.

BL Black BZ Bronze DDB Dark bronze DNA Natural aluminum GN Green GR Gray SND Sand STG Steel gray TVG Terra verde green WH White CF Custom

Intended Use

4524

Accents trees, shrubs, signs and walls from the ground, wall mountings or trees. Material

max. HID: metal halide PAR-20, 35W max.

Mounting

Listings

Heavy wall cast aluminum or bronze.

Lens

1/2" NPT adjustable knuckle.

U.L., CSA, suitable for wet locations.

Lamp

Clear convex tempered glass. Amber, blue, green and red lenses also are available.

Fasteners

Low voltage: MR16, 75W max. Incandescent: PAR-16 or PAR-20, 60W

Ordering Information

Product

Low

voltage1

3-7/8 (98)

Example: 4524 A P2035CM 277 SP CLC SPCA LP BL

Distribution4

Voltage 122

NR NSP SP NFL

No reflector Narrow spot Spot Narrow flood FL Flood WFL Wide flood

Lens5 CLC Convex lens clear CLA Convex lens amber CLB Convex lens blue CLG Convex lens green CLR Convex lens red

Mounting accessories

See page 631. M35 120 M50 2083 Accessories M75 2403 Materials Internal Incandescent 277 A Aluminum IHL Internal P1640I 347 B Bronze honeycomb P1655I 120/2773 louver P1660I MVOLT3 External 3 P2050I TB GS Glare shield P2060I NOTES: 1 Ceramic metal halide 1 Separate ballast enclosure required for HID models, transformers for low voltage. P2035CM 2 3 4 5 6 7 8

PSG9

6 (152)

Stainless steel.

Options

Finish

Fusing SF Single fuse6 DF Double fuse7 Ballast GEB8 Electronic ballast

BL Black BZ Bronze DDB Dark bronze DNA Natural aluminum GN Green GR Gray SND Sand STG Steel gray TVG Terra verde green WH White CF Custom

Transformer sold separately. Only available with HID lamps. Not all distributions available with all lamp types, use NR when not using LPI option. CLC will be used if no lens is chosen on HID. SF is available with 120V, 277V or 347V on HID only. DF is available with 208V or 240V on HID only. Only valid with metal halide lamps.

www.hydrel.com

Lamp LP Lamp installed

5-5/8 (140)

LITHONIA FL UORESCENT HYDREL FLUORESCENT

4524

Lamp type

Head

625

LANDSC APE LIGHTING LANDSCAPE

Accent Lighting

Intended Use

4529

Uplighting of trees, signs, walls and building façades.

Head Material

Lamp

Mounting

Listings

Cast aluminum or cast bronze body and glare shield. Knuckle is cast bronze.

Incandescent: PAR38 medium-base.

1/2" NPT adjustable knuckle.

U.L., suitable for wet locations.

Lens

Fasteners

None.

Stainless steel.

Ordering Information

Example: 4529 B P38150I 120 SP JBB LP

Product

Material

Lamp type

Voltage

4529

A Aluminum B Bronze

Incandescent P38100I P38150I

120

Distribution1 NR SP FL WFL

Mounting accessories

No reflector Spot Flood Wide flood

See page 631.

LP Lamp installed

9 (229) NOTES: 1 Not all distributions available with all lamp types, use NR when not choosing LPI option. 2 Finish required on aluminum products.

6 (153) 2-9/16 (65)

4610, 4620

3-3/4 (96)

Finish2

Lamp BL BZ DDB DNA GN GR SND STG TVG WH CF

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

Intended Use Tree mounted or ground mounted uplighting, or building-mounted facade lighting.

Heads

HYDREL

NOTES: 1 Transformer, ballast sold sperately. 2 Transfomer included on 4620 unless 12V is specified. 3 Separate ballast enclosure required, available on 4620 only. 4 Requires GEB ballast. 5 Not all distributions available with all lamp types, use NR when not choosing LPI option. 6 SF is available with 120V, 277V or 347V on HID only. 7 DF is available with 208V or 240V on HID only. 8 Only available with metal halide lamps and MVOLT voltage. 9 Only valid with yoke mount.

626

Material

Lamp

Mounting

Fasteners

Fixture, knuckle, yoke – copper-free aluminum A360. All aluminum materials are chem filmed or anodized prior to painting.

MR-16, 50W max.

Knuckle1/2" NPT adjustable. Yoke mount with a minimum of 10 Ft. 18/3 STW Cord. Cord length must be specified.

Stainless steel.

Lens Crowned tempered glass.

Ordering Information

46101 46202

Voltage

Distribution5

Mounting

Accessories

NR No reflector NSP Narrow spot SP Spot NFL Narrow flood FL Flood WFL Wide flood

KM Knuckle mount YM Yoke mount

Internal IHL Internal honeycomb louver CFAMB Color filter amber CFBLU Color filter blue CFGRN Color filter green CFRED Color filter red External GS Glare shield FGS Full glare shield

Lamp type

4610 KM 5-1/8 (131)

4-1/4 (108)

4610 YM 3 (76)

5-1/8 (131) 4-1/4 (108)

U.L., C.U.L., IP66, suitable for wet locations.

Example: 4610 M50 277 FL KM SSB IHL FGS LPI SND

Low voltage 121 M202 120 M352 208 M502 240 M751 277 Ceramic metal halide3 347 35CMT4 4 120/277 P2035CM MVOLT TB

Product

Listings

Mounting accessories See page 631.

4620 KM 7-1/16 (180)

4620 YM 3 (76)

3 (76) 4-1/4 (108)

7-1/16 (180)

Options

Lamp

Fusing LPI Lamp inclulded SF Single fuse6 DF Double fuse7 Ballast Cord set length9 GEB Electronic CSL __ 10’-50’ ballast8 in 5’ increments

Finish BL Black BZ Bronze DDB Dark bronze DNA Natural aluminum GN Green GR Gray SND Sand STG Steel gray TVG Terra verde green WH White CF Custom

3 (76)

5-1/4 (133)

www.hydrel.com

PSG9

Accent Lighting

4630 4640

Landscape and architectural applications.

Material

Lamp

Fixture, knuckle, yoke – die-cast, copper-free aluminum alloy A360. All materials are chem.-filmed or anodized prior to painting.

Incandescent: 150W max. HID: metal halide 150W max.

Mounting

minimum of 10 ft 18-3 STW cord. Cord length must be specified.

Fasteners

Lens

Listings

Crowned tempered glass.

U.L., C.U.L., C.E., IP66, suitable for wet locations.

Stainless steel.

Knuckle: 1/2:” NPT adjustable. Yoke:

Ordering Information

Product 4630

Lamp type

Voltage 1

Incandescent P3075I Ceramic metal halide2 P3035CM P3070CM 20CMT4 35CMT4 70CMT4

120 208 240 277 347 480 120/277 TB MVOLT3

Example: 4630 P3070CM 120 SP KM SSB IHL LPI BL

Distribution4 NR No reflector SP Spot FL Flood

Mounting accessories

Mounting KM Knuckle mount YM Yoke mount

See page 631.

4630 KM

Accessories Internal IHL CFAMB CFBLU CFGRN CFRED External GS FGS

Internal honeycomb louver Color filter amber Color filter blue Color filter green Color filter red Glare shield Full glare shield

5-1/4 (133)

Lamp

Finish

LPI Lamp included

BL BZ DDB DNA GN GR SND STG TVG WH CF

5-1/4 (133)

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

Example: 4640 P38150I 120 SP KM 4TRAS IHL GS LPI TVG

Distribution4

Mounting

NR No reflector SP Spot MFL Medium flood FL Flood

KM Knuckle mount YM Yoke mount

Mounting accessories See page 631.

Accessories Internal IHL Internal honeycomb louver CFAMB Color filter amber CFBLU Color filter blue CFGRN Color filter green CFRED Color filter red External GS Glare shield FGS Full glare shield

Options

Cord set length8

Fusing SF Single fuse5 DF Double fuse6 Ballast GEB Electronic ballast7

CSL __ 10’-50” in 5’ increments

NOTES: 1 Available in 120V only. 2 Separate ballast enclosure required. 3 MVOLT is standard on all metal halide lamps with GEB ballast option. 4 Not all distribution available with all lamp types. 5 SF is available with 120V, 277V or 347V on HID only. 6 DF is available with 208V or 240V on HID only. 7 GEB default if MVOLT selected; only valid with metal halide lamps. 4640 YM 8 Only valid with yoke mount.

4640 KM 9-3/8 (237)

6-1/2 (165)

9-3/8 (237)

6-1/4 (159)

www.hydrel.com

6-1/2 (165)

Finish

Lamp LPI Lamp included

BL BZ DDB DNA GN GR

Black Bronze Dark bronze Natural aluminum Green Gray

SND STG TVG WH CF

Sand Steel gray Terra verde green White Custom

LITHONIA FL UORESCENT HYDREL FLUORESCENT

Voltage

Quartz1 120 150Q 208 Incandescent1 240 P38100I 277 P38150I 347 Ceramic 480 metal halide2 120/277 70CMT6 TB 150CMT6 MVOLT3 Metal halide2 70M 100M 150M 175M P3870M P38100M P38150M High pressure sodium2 70S 100S

4-3/4 (121)

PSG9

CSL __ 10’-50” in 5’ increments

5-1/4 (133)

Ordering Information

Lamp type

Fusing SF Single fuse5 DF Double fuse6 Ballast GEB Electronic ballast7

8-1/16 (205)

4-1/4 (108)

4640

Cord set length8

Options

4630 YM

8-1/16 (205)

Product

Heads

LANDSC APE LIGHTING LANDSCAPE

Intended Use

627

LANDSC APE LIGHTING LANDSCAPE

Accent Lighting

Intended Use

4650

These large, versatile accent lights provide illumination for a variety of architectural and landscape applications to sixty feet.

Head Material

Socket

Mounting

Listings

Die-cast, copper-free aluminum alloy A360. All aluminum materials are chem-filmed or anodized prior to painting.

Incandescent: mini-can (T-4) or mogul end prong (PAR 56). HID: medium-base or G12 base.

Knuckle:1/2" NPT, Yoke: with a minimum of 10 ft 18/3STW cord. Cord length must be specified.

U.L., C.U.L., C.E., IP66, suitable for wet locations.

Voltage

Finish

Lamp

See ordering guide.

See ordering guide for color options.

Incandescent: T-4, 250W max., PAR56, 300W max. HID: E17, T-6 or PAR38, to 175W max.

Lens

Fasteners

Crowned tempered glass.

Stainless steel.

Ordering Information

Product 4650

Lamp type 1

Incandescent 250Q P38100I P56300I Ceramic metal halide2 70CMT6 150CMT6 P38100CM Metal halide2 70M 100M 150M 175M P38100M P38150M

Example: 4650 150M TB SP KM BSB FGS IHL LP DDB

Voltage

Mounting

Accessories

Cord set length8

Lamp

120 208 240 277 347 120/277 TB MVOLT3

KM Knuckle mount YM Yoke mount

Internal IHL Internal honeycomb louver CFAMB Color filter amber CFBLU Color filter blue CFGRN Color filter green CFRED Color filter red External GS Glare shield FGS Full glare shield

CSL __ 10’-50” of cord

LPI Lamp included

Mounting accessories

Distribution4 TSP NSP SP NFL MFL FL WFL NR

Tight spot Narrow spot Spot Narrow flood Medium flood Flood Wide flood No reflector

See page 631.

HYDREL 628

4-3/4 (121)

GN GR SND STG TVG WH CF

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

6-1/4 (159)

NOTES: 1 120V only. 2 Separate ballast enclosure required. 3 Standard on metal halide lamps with GEB ballasts. 4 Not all distribution available with all lamp types, use NR when not choosing LPI on PAR lamps. 5 SF is available with 120V, 277V or 347V on HID only. 6 DF is available with 208V or 240V on HID only. 7 GEB default if MVOLT selected; only valid with metal halide lamps. 8 Only valid with yoke mount.

www.hydrel.com

PSG9

4650 KM 11-9/16 (295)

Options Fusing SF Single fuse5 DF Double fuse6 Ballast GEB Electronic ballast7

Finish BL BZ DDB DNA

4650 YM

8-1/2 (216)

11-9/16 (295)

8-1/2 (216)

Accent Lighting

4709

Designed for installation where cost and reliability are paramount.

Head Material

Socket

Mounting

Listings

Die-cast aluminum.

Pulse-rated medium-base.

1/2" NPT adjustable knuckle.

U.L., C.U.L., suitable for wet locations.

Lamp

Lens

Fasteners

Incandesent: PAR-38, 250W max. HID: PAR-38,150W max.

Convex tempered glass (HID), lens optional on Incandescent models.

Stainless steel.

Ordering Information

Example: 4709 P3870M 120 SP CLC SPCA LP BL

Product

Lamp type

Voltage

Distribution

Lens

4709

Incandescent1

120 208 240 277 347 120/277 TB MVOLT3

NR No reflector SP Spot FL Flood

CLA Convex lens amber CLB Convex lens blue CLG Convex lens green CLR Convex lens red CLC Convex lens clear 4

P38100I P38150I Metal halide2 P3870M P38100M P38150M P3870CM P38100CM

Mounting accessories See page 631.

Accessories

Options

Lamp

Internal IHL Internal honeycomb louver External GS Glare shield

Fusing SF Single fuse5 DF Double fuse6 Ballast GEB Electronic ballast7

LP Lamp installed

Finish BL BZ DDB DNA GN GR SND STG TVG WH CF

PSG9

9 (229) 5-3/8 (140)

5 (127)

www.hydrel.com

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

LITHONIA FL UORESCENT HYDREL FLUORESCENT

NOTES: 1 Incandescent models valid with 120V only. 2 Separate ballast enclosure required for HID models. 3 Standard on metal halide lamps with GEB ballast. 4 CLC lens provided on all HID models, optional on incandescent. 5 SF available with 120V, 277V or 347V on HID only. 6 DF available with 208V, 220V or 240V on HID only. 7 Only available with metal halide lamps and MVOLT voltage.

LANDSC APE LIGHTING LANDSCAPE

Intended Use

629

LANDSCAPE LIGHTING

Linear Floodlight

Intended Use

4750

T5 and T5HO lamp performance, high output symmetrical and asymmetrical distributions and simple design, make the Hydrel 4750 Series ideal for spreading soft, even illumination along walls, signs and planters.

Material

Socket

Lens

Extruded A360 aluminum with diecast aluminum end caps. All fasteners are stainlesss steel.

G5 miniature bi-pin.

Curved high-strength, optical-grade clear acrylic.

10 ft 18-3 STW (US) or 3M 3GX1.0mm HO7RN-F (IEC) flexible cord. Cord length must be specified.

Brite™ cold weather options available.

Mounting

Accessories

KM: knuckle mounted with two 1/2” NPT side mounting arms. AWM: adjustable wall mount with two side mounting brackets and minimum of

External glare control available.

Electronic multi-volt, 0° F (-18° C) minimum starting temperature.

Options

Listings

Tamper-proof hardware and Polar

U.L., C.U.L.

Voltage Multi-volt (120V-277V 50/60 Hz).

Lamp

Distribution

Fluorescent, single or multiple T5 and T5HO to 54W per lamp.

Wall wash, narrow flood, medium flood, vertical flood and wide flood.

Ordering Information

Product 4752 4753 4754 4756 4758

Example: 4754 54T5HO MVOLT MFL KM WMP FSS LP30K DNAT

Lamp type

Voltage 2

4752 14T5 2/14T5 24T5HO 2/24T5HO 4753 21T5 2/21T5 39T5HO 2/39T5HO 4754 28T5 2/28T5 54T5HO 2/54T5HO 4756 2/39T5HO 4/39T5HO 4758 2/28T5 4/28T5 2/54T5HO 4/54T5HO

Ballast

MVOLT T5 miniature bi-pin Two T5 miniature bi-pin1 T5 high output miniature bi-pin Two T5 high output miniature bi-pin1 T5 miniature bi-pin Two T5 miniature bi-pin1 T5 high output miniature bi-pin Two T5 high output miniature bi-pin1 T5 miniature bi-pin Two T5 miniature bi-pin1 T5 high output miniature bi-pin Two T5 high output miniature bi-pin1 Two T5 high output miniature bi-pin Four T5 high output miniature bi-pin

Distribution WWD Wall wash VFL Vertical flood NFL Narrow flood MFL Medium flood WFL Wide flood3

Mounting options See page 631. For runs or endto-end mounting, see www.hydrel.com.

Accessories4

Cord set length6

External

Finish

CSL__ 10’ - 50’ of cord, available in 5’ increments

FSS Flush source shield FVSR Full visor

DBLB DSPD DNAT DWHG

HVSR Half visor

Mounting

Options

KM Knuckle mount AWM Adjustable wall mount

TPH Tamperproof hardware PLPK Polar pack cold weather option5

Two T5 miniature bi-pin Four T5 miniature bi-pin1 Two T5 high output miniature bi-pin Four T5 high output miniature bi-pin1

4 -7/16 (113)

DDBT DSPF DSST GN SND TVG CF

Lamp LPI Lamp included7 LP30K 3000°K lamp included LP35K 3500°K lamp included LP41K 4100°K lamp included

2-5/16 (59) 4 (102)

1/2” NPT Stem

AWM

Designer black, textured Dark gray, textured Natural aluminum, textured Designer white, textured Dark bronze, textured Rust, textured Sandstone, textured Green Sand Terra verde green Custom

NOTES: 1 Available with WFL distribution only. 2 MVOLT multi-volt ballast range: 120V277V, 50/60Hz. 3 WFL distribution only available with multiple lamp options as specified with note 1. 4 Accessories are mutually exclusive. Choose one. 5 Polar pack cold weather is a patent-pending design that maintains T5HO lamp temperature at 50° F (10° C) for optimum light output. Consult www.hydrel.com for more information. 6 Required for AWM mounting only. Specify cord length in feet. 7 If LPI is chosen, default lamp is LP30K.

3 (76) X

4750 SERIES LINEAR FLUORESCENT 4752 28 (711)

HYDREL

4753

630

KM

40 (1016)

4754

Consult www.hydrel.com for details. 51 (1295)

4758 102 (2591)

www.hydrel.com

PSG9

Accent, Linear Floodlighting

Accent, Linear Flood Mounting Options 4529

4610

4620

4630

4640

4650

4709

47501

















































































































■ ■

2100

4511

4516

4519 4524

ARJB Architectural junction box









FJB Flush mounted junction box







JBA/JBB Junction box aluminum/bronze







MS/MSB Mounting spike steel/bronze (12" or 18" – 12 volt only)





PS/PSS Polymer ground spike open/sealed (18",24"36")2















No Ballast



PSSA Pedestal stanchion mount SBA/SBB Stake box aluminum/bronze (12" or 18")3 SMSA Stanchion mount __TRAS/__TRBS Tree strap4 WBC35R/WBC4O Wall box cover





















































5





















3,5

5

WMC Wall mount cover3











WMSA Wall mount with integral splice box











































































WMP EA___ Wall mount plate for extended arm

























WMP EAS___ Wall mount plate with extended arm strut





































WMSA EA___ Wall mount with extended arms ■

WMP Wall mount plate

LANDSCAPE LIGHTING

■ = option available

Ballast AGB Above ground ballast (175-watt max. – remote) BPCA/BPCB Big polymer combo box (175-watt max.)



■ ■

BPTA Big polymer transfomer box (300-watt max. low voltage)

BSB EA__ Big surface box with extended arms (175-watt max.) BSBTS Big surface box with tree strap (175-watt max.)5



CBA/CBB Combo box (175-watt max.)



EBA/EBB Encapsulated ballast box (100-watt max.)



RACB Round aluminum combo box (100-watt max.)











































































■5





■5

■5





























■5

■5





■5

■5

















SCA/SCB Small transformer box, aluminum or bronze (75-watt max.)







SPCA Small polymer combo box (70-watt max.)







SSB Small surface box (70-watt max.)



■5

5 Will accept two fixtures per mounting. To order with the fixture put 2/ in the lamp type category for example: 4511 2/M35 12 SP WBC 4O DNA. Visit www.hydrel.com for detailed information on any of the mounting options.

www.hydrel.com

5



Reminder: Transformer or HID ballast not included (excluding 4620 M50, 4750). Please remember to order a ballast or transformer box.

LITHONIA FL UORESCENT HYDREL FLUORESCENT





NOTES: 1 Two of the selected mounting boxes will be provided. 2 PS available in 12V only. 3 Knuckle mount fixtures only. 4 Specify up to 4 junction boxes per strap.









TRMT Tree mount transformer















5

SSBTS Small surface box with tree strap (70-watt max.)



5

5

SSB EA__ Small surface box with extended arms (70-watt max.)

PSG9









BSB Big surface box (175-watt max.)5



631

LANDSCAPE LIGHTING

Step Lighting

Intended Use

4451 4452 4453

For use in outdoor wet locations, such as patios and pathways at hospitals, hotels, schools, airports and parking garages.

Material

Socket

Lens

Accessories

Cast aluminum or cast bronze. Aluminum body black permabarred.

Incandescent: Medium screw base Fluorescent: 2G7 or GX24Q-1 base.

Louver door, 45° cut-off.

Lamp

Ballast

Diffused, tempered glass for nonlouvered door. Clear, tempered glass for louvered door.

Incandescent: 40W max, A19 lamp. Fluorescent: single or double 13W max CFL twin tube or double twin tube.

Fluorescent: electronic ballast high frequency with 0° F (-18° C) minimum starting temperature.

4451 4452 4453

Material A B

Aluminum Bronze

3/4" NPT side entries standard.

U.L., CSA, suitable for wet locations.

Lamp type

Voltage

Incandescent 40I 1 Fluorescent 7TT 9TT 13DTT 2/7TT2 2/9TT2 2/13TT2

120 277 347

Accessories

10-1/2 (267)

4452

LPI Lamp included

Finish BL BZ DDB DNA GN GR SND STG TVG WH CF

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

4-9/16 (113) 3 (116)

10-1/4 (260)

4-7/16 (113)

5-1/4 (133)

NOTES: 1 Incandescent models available with 120V only. 2 Only available with 4452. 3 Only available with 4451.

4 (102)

10-1/4 (260)

4453

Lamp

External LLV Louver door Internal3 IPL Parallel louver

5-3/8 (136)

HYDREL

Listings

Example: 4451 A 13DTT 120 LPI SND

4451

632

Stainless steel.

Conduit Entries

Ordering Information

Product

Fasteners

3-7/8 (98)

3-3/4 (95)

www.hydrel.com

PSG9

Step Lighting

4454 4456

For use in outdoor wet locations, such as patios and pathways at hospitals, hotels, schools, airports and parking garages.

Material

Ballast

Lens

Fastener

Cast aluminum or cast bronze. Aluminum body black permabarred.

HID: Magnetic ballast high power factor with -20° F (-29° C) minimum starting temperature. Fluorescent: electronic ballast high frequency with 0° F (-18° C) minimum starting temperature.

Diffused, tempered glass for nonlouvered door. Clear, tempered glass for louvered door.

Stainless steel.

Lamp HID: 50W max, E17 lamp.

Socket

Listings U.L., CSA, suitable for wet locations.

Conduit Entries

LANDSCAPE LIGHTING

Intended Use

3/4" NPT side entries standard.

Medium screw base, pulse-rated.

Ordering Information

Product 4454 4456

Material A B

Aluminum Bronze1

Example: 4456 A 42TRT 120 EL N LPI DDB

Lamp type

Voltage

Incandescent 75I2,3 Fluorescent3 18TRT 26TRT 32TRT 42TRT Metal halide 50M High pressure sodium 35S2 50S

120 277 347

External LLV Louver door

Lamp LPI Lamp included

Finish BL BZ DDB DNA GN GR SND STG TVG

8-5/8 (219) 4 (102)

5-1/4 (133)

13 (330)

6-1/2 (165)

6 (152)

www.hydrel.com

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

LITHONIA FL UORESCENT HYDREL FLUORESCENT

10-1/4 (260)

4456

PSG9

EL N NICAD battery backup EL N SD NICAD battery backup self diagnostic

WH CF

4454 NOTES: 1 Not available with the 4456. 2 Available in 120V only. 3 Not available with 4454. 4 Only available with fluorescent lamps.

Options3,4

Accessories

633

LANDSCAPE LIGHTING

Step Lighting

Intended Use

4462

Meets installation requirements for wood and all (insulation) type IC applications. Fixtures are completely weatherproof with neoprene gasket and tempered lens.

Quartz halogen: T-4 75W max., 120V. Low voltage: (2) MR-16, 35W max. each.

Gasket

while totally submerged in water.

Heavy wall cast bronze construction. Natural bronze finish.

Single piece, molded U-shaped silicone.

Fasteners

Niche

Socket

Cord

Stainless steel with cast bronze mounting frame which has provisions for locking fixture into position. Single conduit entrance is 3/4" NPT with 3/4" x 1/2" NPT reducer bushing.

Incandescent: medium base. Quartz Halogen: Mini-can screw base. Low Voltage: Gx5.3 bi-pin.

Minimum of 35 ft of #16-3ST submersible rated cord. Cord entrance is brass water-tight seal and epoxy encapsulated. Cord length must be specified.

Fixture Housing and Door

Lamp

Lens Tempered borosilicate diffuse glass standard. Clear tempered borosilicate glass.

Listings U.L., C.U.L., IP67.

Factory Leak Tested Fixtures are tested at 10 PSI (0.70kg/cm2) internal pressure

Incandescent: A-19 90W max., 120V.

Ordering Information

Example: 4462 2/M35 12 FL RG CSL50 LPI

Product

Lamp type

Voltage

4462

Incandescent 90I Quartz 75Q Low voltage 2/M35

121 120

Distribution NR SP NSP FL NFL WFL

No reflector2 Spot2 Narrow spot2 Flood Narrow flood2 Wide flood2

11 (279)

HYDREL

5-3/8 (137)

634

Stainless steel.

www.hydrel.com

Accessories External3 RG Rock guard LLV Louver

6-7/8 (175)

Cord set length

Lamp

CSL ___ 35’-120’ of cord4

LPI Lamp included

NOTES: 1 Transformer sold separately. 2 Only available with 2/M35. 3 Accessories are mutually exclusive. Choose one. 4 CSL50 is maximum length for 12V fixtures.

PSG9

Border Lighting

M4534

This unique style, and distinctive fixture is ideal for installation in sidewalks or promenades – designed to be recessed in concrete, flush to lower rim.

Material Cast aluminum housing with integral 24 in3 junction box (incandescent) or ballast box (HID, fluorescent).

Lamp Incandescent: 60W max., A-15 or T10/tubular. 100Q (Quartz) 100W

max., T-4/tubular. HID:100W max., E-17/elliptical or T6/G12. Fluorescent: 32TRT, 32W max.

Socket Quartz: mini-can base. Fluorescent: Gx24q-3 base. HID, Incandescent: pulse-rated medium base.

Lens

bottom openings available.

Molded, tempered, borosilicate.

Glare Control

Gasket

Black finish Glarefoil™ included.

Molded silicone.

Listings

Conduit Entries

U.L., C.U.L.

Two 3/4" NPT, 1/2" NPT side or

Ordering Information

Example: M4534 70CMT6 MVOLT 34S MILS180 GEB LPI STG

Product

Lamp type

Voltage

Conduit entry

Accessories

M4534

Incandescent1 60I 100Q Fluorescent 18TRT 26TRT 32TRT Metal halide 50M 70M 100M Ceramic metal halide 35CMT6 70CM 70CMT6 100CM High pressure sodium 35S 50S 70S 100S

120 208 240 277 347 MVOLT2

12B 1/2” NPT bottom 12S 1/2” NPT side 34B 3/4” NPT bottom 34S 3/4” NPT side

MILS90 Internal 90° light shield MILS180 Internal 180° light shield

PSG9

Options Fusing SF DF Ballast5 GEB MLEBAD

Single fuse3 Double fuse4 Electronic ballast Electronic dimming ballst6

Lamp LPI Lamp included

Finish BL BZ DDB DNA GN GR SND STG TVG WH CF

9-1/2 (242)

5-1/4 (133) 10-1/2 (261)

www.hydrel.com

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

LITHONIA FL UORESCENT HYDREL FLUORESCENT

NOTES: 1 Only available in 120V. 2 MVOLT is only available with fluorescent and metal halide lamps with GEB or MLEBAD options. 3 SF available with 120V, 277V or 347V and HID only. 4 DF available with 208V or 240V and HID only. 5 Only available with metal halide lamps and MVOLT voltage. 6 O-10V dimmer not included.

LANDSCAPE LIGHTING

Intended use

635

LANDSCAPE LIGHTING

Border Lighting

Intended Use

4540

This unique and distinctive fixture has been custom designed for installation along park walkways and sidewalks.

Material

Socket

Lens

The bollard section is fabricated from heavy cast aluminum.

Pulse-rated medium base.

Molded tempered glass. 90° cutoff with internal louver.

Lamp

Injection-molded ABS, U.V. stabilized, impact and corrosionresistant for use in all types of environments.

Rough-In Section

HID:100W max., E-17/elliptical or T6/G12.

through-branch wiring, this box has 24 in3 of volume.

Power Module

Conduit Connection

Sealed unit encapsulated in an engineered composite resin to eliminate all water entry.

Two 3/4" NPT bottom openings are standard in the cast aluminum integral junction box. Suitable for

Ordering Information

Example: 4540 70M 277 34B LP BL

Product

Lamp type

Voltage

4540

Metal halide 50M 70M Ceramic metal halide 35CMT4 35CMT6 70CM 70CMT4 70CMT6

120 208 240 277 347 MVOLT1

Conduit entry 34B 12B

Accessories

3/4” NPT bottom 1/2” NPT bottom

Options

MILS90 Internal 90° light shield MILS180 Internal 180° light shield

Fusing SF DF Ballast4 GEB MLEBAD

Single fuse2 Double fuse3 Electronic ballast Electronic dimming ballast5

Lamp

Finish

LP Lamp installed

BL BZ DDB DNA GN GR SND STG TVG WH CF

Black Bronze Dark bronze Natural aluminum Green Gray Sand Steel gray Terra verde green White Custom

8.86 (225) 3-1/2 (88.9)

12 (304.8)

Single Tamper-Proof Retaining Screw

HYDREL

10 (254) 12-1/2 (317.5)

636

NOTES: 1 MVOLT is only available with GEB and MLEBAD options. 2 SF available with 120V, 277V or 347V and HID only. 3 DF available with 208 or 240 volts and HID only. 4 Only available with MVOLT voltage. 5 O-10V dimmer not included.

18 (457.2)

www.hydrel.com

PSG9

Border Lighting

M9450

Pathway and marker lights are multi-purpose units designed for high-traffic areas to be mounted in a variety of substrates. The M9460 Series also is suitable for drive-over applications.

Pathway Light See www.hydrel.com for more details.

M9460

LANDSCAPE LIGHTING

Intended Use

Marker Light

Ordering Information

Example: M9450 18TRT MVOLT 12B LP SND

Product

Lamp type

Voltage

Conduit entry

M9450

Incandescent1 75Q Fluorescent 18TRT 26TRT 32TRT Metal halide 70M Ceramic metal halide 35CMT6 70CM 70CMT6

120 208 240 277 347 MVOLT2

12B 1/2” NPT bottom 12S 1/2” NPT side 34B 3/4” NPT bottom 34S 3/4” NPT side 1B 1” NPT bottom

Accessories

M9460

Lamp type

NOTES: 1 Only available in 120V. 2 MVOLT is only available with fluorescent and metal halide lamps. 3 SF available with 120V, 277V or 347V and HID only. 4 DF available with 208V or 240V and HID only. 5 Only available with HID lamps and MVOLT voltage. 6 O-10V dimmer not included. 7 Low voltage only, transformer sold separately.

PSG9

BL BZ DDB DNA GN GR SND STG TVG WH CF

Black Bronze Dark bronze Natural aluminum Green Gray7 Sand Steel gray Terra verde green White Custom

Example: M9460 100CM 120 34B LP TVG

Voltage 7

12 120 208 240 277 347 MVOLT2

Conduit entry

Accessories

12B 1/2” NPT bottom 12S 1/2” NPT side 34B 3/4” NPT bottom 34S 3/4” NPT side 1B 1” NPT bottom

XLS Extermal glare shield 2XLS (2) exteral glare shields

Options Fusing SF DF Ballast5 GEB MLEBAD

Single fuse3 Double fuse4

Lamp LP Lamp installed

Electronic ballast Electronic dimming ballast6

M9450

M9460 9 (229) 4 (102)

13-1/8 (334) 2-1/4 (57) 3 (76) 15-7/8 (403)

15-7/8 (403)

www.hydrel.com

Finish BL BZ DDB DNA

Black Bronze Dark bronze Natural aluminum GN Green GR Gray7

SND Sand STG Steel gray TVG Terra verde green WH White CF Custom

LITHONIA FL UORESCENT HYDREL FLUORESCENT

Low voltage 50QT3 Incandescent1 75Q Ceramic metal halide 35CMT4 35CMT6 70CMT4 70CMT6 70CM 100CM

Finish

LP Lamp installed

Fusing SF Single fuse3 DF Double fuse4 Ballast5 GEB Electronic ballast MLEBAD Electronic dimming ballast6

Ordering Information

Product

Lamp

Options

MILS90 Internal 90° light shield MILS180 Internal 180° light shield

637

LANDSCAPE LIGHTING

Border Lighting

4595 4596 4597 4598

Intended Use The graceful mushroom garden light is ideal for lighting flower beds, low planter areas, walkways and driveways, or any area where an unobstructed circular field of light is desired.

Material

Lamp

Socket

Lens

Heavy-gauge cast bronze body with spun copper canopy.

Quartz T3 20W max.

G4 bi-pin

Glass

Ordering Information

Product 4595 4596 4597 4598

Example: 4595 20QT3 12 JBA LPI VBL

Lamp type

Accessories

Voltage

20QT3

12

NOTES: 1 Low-voltage transformer sold separately. 2 Vendor-supplied finish. Consult factory for details.

1

JBA J-box, aluminum JBB J-box, bronze

4595

Finish2

Lamp LPI Lamp included

VBL VBZ VGN VTVG VWH

Black Bronze Green Terra verde green White

4596 8 (203)

10-3/4 (273)

17-5/8 (448)

18-7/8 (479)

13-7/8 (352)

13-7/8 (352)

4597

4598 8 (203)

14 (356)

17-5/8 (448) 17-3/4 (451)

HYDREL

13-7/8 (352)

638

www.hydrel.com

14 (356)

PSG9

Ground or Wall Mounting 4-5/8 (117) 2-7/8 (73) WBC40

6 (152) 6 (152)

7/8 (23)

7/8 (23)

2-1/2 (63)

4-1/8 (105) 3-1/4 (83) 6 (152)

ARJB

4-3/4 (121)

4-1/8 (105) 4-1/5 (107) FJB

18 (457)

2-3/4 (70)

SMSA

JBA JBB

18 (458)

8-1/4 (209)

7 (179) 3-78 (99)

8-1/8 (207)

SPCA

PS

6 (153)

PSS

SBA18 SBB18

SBA12 SBB12

10 (254) 7-1/8 (181)

5-1/8 (130)

4-1/4 (102)

4 (102)

4-1/4 (108)

5 (127)

9-1/2 (241)

TRMT

12-1/2 (216)

4-1/8 (104)

EA (HID 100 -175 Watt) on BSB

SCA SCB

4-1/8 (105)

8-7/8 (224)

12-1/4 (311)

2-3/8 (61)

2-3/8 (61)

BSB

EBB EBA

SSB

12 (305)

9 (229)

2-1/4 (57) EA45 (HID 100 -175 Watt) on BSB

12-1/4 (311)

6 (152) 12 (305)

12-1/4 (311)

EA90 (HID 100 -175 Watt) on BSB

6 (152) 12 (305) 9 (229)

2-1/4 (57)

12-1/4 (311)

12-1/4 (311)

12-1/4 (311)

6 (152)

6 (152) 24 (610)

24 (610)

12-1/4 (311)

24 (610) 9 (229)

2-1/4 (57)

12-1/4 (311)

12-1/4 (311) 6 (152)

6 (152) 36 (914)

36 (914)

36 (914)

9 (229)

2-1/4 (57) 8-7/8 (224)

EA (LV, HID 35 -70 Watt) on SSB

12 (305)

EA45 (LV, HID 35 -70 Watt) on SSB

8-7/8 (224)

6 (152) 12 (305)

8-7/8 (224)

12 (305) 6 (152) 24 (610) 6 (152)

8-7/8 (224)

6 (152) 36 (914)

9 (229)

2-1/4 (57) EA45 (Incan) on WMSA

24 (610)

9 (229)

6 (152)

36 (914)

EA (Incan) on WMSA

8-7/8 (224)

6 (152)

8-7/8 (224) 36 (914)

6 (152)

12 (305)

9 (229)

24 (610)

2-1/4 (57)

8-7/8 (224)

6 (152)

6 (152) 12 (305)

2-1/4 (57)

EA90 (Incan) on WMSA

6 (152) 12 (305)

9 (229)

6 (152) 24 (610)

2-1/4 (57)

6 (152) 24 (610)

9 (229) 6 (152)

36 (914)

www.hydrel.com

6 (152) 36 (914)

LITHONIA FL UORESCENT HYDREL FLUORESCENT

24 (610)

EA90 (LV, HID 35 -70 Watt) on SSB

8-7/8 (224)

8-7/8 (224)

PSG9

5-7/8 (148)

BPCA BPCB

12-1/4 (311)

36 (914)

T1903

6-1/2 (165)

CBA CBB

4-1/2 (114)

4 (102)

6 (153)

AGB

9 (229)

TRAS TRBS

WMSA

10-1/2 (267)

9-1/2 (241.3)

9-1/4 (235)

5 (235)

MS12 MSB12 12 (305)

7-3/8 (187)

5-3/4 (146)

BPTA

MS18 MSB18

8-7/8 (226)

7-3/8 (187)

TRA TRB

8-1/8 (206)

PSSA

8 (205)

7-3/4 (197)

20-1/4 (514)

7 (178)

4-1/5 (107)

12 (305)

6-1/2 (165) 3-1/4 (83)

18 (457)

18-1/4 (464)

12 (305)

3 (75)

1 (25)

6 (152)

WMC 12 (305)

6 (152)

3 (75)

WBC35R

1/2 (12.7)

4-1/4 (108)

3 (75)

3 (75)

2-1/2 (63)

6 (152) 3-3/4 (95)

MOUNTING

4-1/8 (105)

NOTES: For WMP, SSBTS, BSBTS and RACB, see www.hydrel.com.

639

MOUNTING

Ground, Wall or Pole Mounting

2-3/4 (70)

3-3/4 (95)

1 (25)

4-1/5 (107)

3-1/4 (83)

4-1/8 (105)

6 (152)

6 (152) 4-1/8 (105)

ARJB Architechtural Junction Box

WMSA Wall Mount

FJB Flush Mount Junction Box

3-1/4 (83) 2-1/4 (57) 6 (152)

5 (127) 18 (457)

3-3/4 (95)

EWM Extended Wall Mount

PMSA Pole Mount

3-1/2 (89)

24 (610)

6 (152)

7 (178)

TRJB Tree Mount

6 (152) 6 (152)

6-1/2 (165)

18 (457)

18 (457)

5-1/2 (140) 6 (152)

6 (152)

6 (152)

SMSA Stanchion Mount

SMT Stanchion Mount Tee

3-1/2 (89) 3 18 24 (304) (457) (608)

PAR4 / PAS4 Pole Arm Round Pole Arm Square

3-5/8 (92)

6 (152) 6 (152) 24 (610)

3-1/2 (89)

7 (178) 6-1/2 165

3-1/2 (89)

6 (152) 3 18 24 (304) (457) (608)

PSSA Pedestal Stanchion Mount

PATR4 / PATS4 Pole Arm Twin Round Pole Arm Twin Square

3-5/8 (92)

HYDREL

PMT Pole Mount Tee

6 (152)

5-1/2 (140)

640

www.hydrel.com

PSG9

Surface Mount Ballast

SMBTNM Tenon Mount Knuckle /Yoke

SMBEWM Extended Wall Mount Knuckle / Yoke

6-1/2 (165)

6-1/2 (165)

27-1/2 (698)

10-1/2 (267) 6-1/2 (165)

8-3/16 (208)

19 (483)

6-1/2 (165)

SMB

SMB Yoke 19 (483)

6-1/2 (165)

8-3/16 (208)

6-1/2 (165)

19 (483)

8-3/16 (208)

19 (483)

18-1/4 (464)

9-1/2 (241)

SMBR Remote mount (Can be used for a wide variety of mounting placements.)

Knuckle

8-3/16 (208)

18-1/4 (464)

9-1/2 (241)

8-3/16 (208)

MOUNTING

(Ballast or Transformer Included)

6-1/2 (165)

SMBSMT Stanchion Tee Mount Knuckle / Yoke

6-1/2 (165) 6-1/2 (165) 22 (559) 22 (559)

6 (152) 38 (965)

6 (152) 38 (965)

8-3/16 (208)

SMBSMSA Stanchion Mount Knuckle / Yoke

SMBPMT Pole Tee Mount Knuckle / Yoke 9-1/2 (241)

9-1/2 (241) 9-1/2 (241) 8-3/16 (208) 6-1/2 (165)

6-1/2 (165)

31-1/4 (794)

38 (965)

31-1/4 (794) 6-1/2 (165)

8-3/16 (208)

PSG9

www.hydrel.com

38 (965)

LITHONIA FL UORESCENT HYDREL FLUORESCENT

9-1/2 (241)

641

MOUNTING

Brackets (for Pole/Tenon Mounts)

Brackets – Must be ordered with pole to insure proper fit. For use with Hydrel poles or stanchions only. 15"

41-1/2"

RSA Pole – mount to T25 2-7/8" OD tenon Part Number

EPA

Weight

HYDRBA 28

1.2

7.0

HYDRBA 32

1.7

14.3

HYDRBA 38

1.9

10.5

HYDRBA48

2.7

14.5

HYDRBA 49

2.2

17.5

24"

30"

15"

30"

HYDRBA38

HYDRBA28

HYDRBA32 30"

15"

34"

15"

24"

30"

HYDRBA48

HYDRBA49 6"

SSA Pole – brackets flush mount on 4" or 5" poles. For use with internal sleeve, plain open top poles. Part Number

EPA

6"

30"

18"

2-3/8"O.D.

Weight

HYDSBA28

.90

12

HYDSBA38

1.5

17

HYDSBA48

2.25

22

HYDSBA49

1.7

22

30"

30"

HYDSBA38

18"

15" 15"

3"Sq. 2-3/8"O.D.

HYDSBA28

6" 30"

HYDSBA48

2-3/8"O.D. 3"Sq.

3"Sq.

34" 24"

6"

HYDSBA49

2-3/8"O.D. 3"Sq.

120˚

RSS Pole – requires T20 or TC stanchion mount Part Number

EPA

Weight

HYDBS28

1.0

21.00

HYDBS32

1.3

34.00

HYDBS38

1.6

32.00

HYDBS48

2.3

44.00

HYDBS49

1.6

44.00

HYDBS28

HYDBS32

Removable Cap

36" 12"

41" 1/2"

2-3/8" O.D.Tubing

24"R

(3) 3/8" x 1/2" set screws @120˚

HYDBS38

HYDBS49

HYDBS48 30"

90˚

30" 15"

30"

15"

30" 12"

24"R 34"

1/2" 2-3/8" O.D.Tubing

(3) 3/8" x 1/2" set screws @120˚

HYDREL 642

Part Number

EPA

Weight

HYDSBS28

1.1

30.00

HYDSBS38

1.7

42.00

HYDSBS49

2.1

45.00

SBS38

SBS28

SSS Pole – requires T20 or TC stanchion mount

SBS49

30"

30" 42"

Tenon 4" x 2.375" Dia. Removable Front Cap

Tenon 4" x 2.375" Dia. (4) 0.375"-16 Set Screws

www.hydrel.com

Removable Front Cap

30" Tenon 4" x 2.375" Dia.

(4) 0.375"-16 Set Screws

(4) 0.375"-16 Set Screws

Removable Front Cap

PSG9

Poles: For detailed technical information, EPAs and wind map, please visit www.hydrel.com.

Ordering Information Type HYDSSAG2 Square straight aluminum G2 HYDSSA Square straight aluminum HYDSSS Square straight steel HYDRSA Round straight aluminum HYDRSS

HYDSSA

Round straight steel

Height 10-16

8-35

10-39

8-30

8-35

Example: HYDSSAG2 16 3.75 J T20 DDB Nominal shaft base size (in.) wall thickness (in.) 3.75

4 5 6 4 5 6 4 4.5 5 6 4 4.5 5

J

.250

C. G J C G

.125 .188 .250 .125 .188

C E G

.125 .156 .188

B

1.20

Fixture mounting method1 Mounting PT Open top Tenon mounting T20 2-3/8" O.D. T25 2-7/8” O.D. Drill mounting G2XTEND DM19G2 Single luminaire drilling DM28G2 Two luminaires at 180° DM29G2 Two luminaires at 90° DM39G2 Three luminaires at 90° DM49G2 Four luminaires at 90° 8100/8200 PM DM19AS Single luminaire drilling DM28AS Two luminaires at 180° DM29AS Two luminaires at 90° DM39AS Three luminaires at 90° DM49AS Four luminaires at 90°

HYDSSS

Options PER

L/AB VD TP

H__ FDL__ FGL__ HH__

NEMA twist-lock receptacle only located at pole top2 Less anchor bolts Vibration damper Tamper-proof screws provided with base cover Horizontal arm3,4 Festoon duplex outlet less electrical3 Festoon GFI outlet less electrical3 Extra handhole3,5

MOUNTING

MOUNTING

Poles

Finish Standard colors BL Black BZ Bronze DDB Dark bronze DNA Natural aluminum GN Green GR Gray SND Sand STG Steel gray TVG Terra verde green WH White Designer colors DBLB Designer black, textured DSPD Dark gray, textured DNAT Natural aluminum, textured DWHG Designer white, textured DDBT Dark bronze, textured DSPF Rust, textured DSST Sandstone, textured CF Custom

HYDRSA

18"

HYDRSS

CAUTION: This pole selection process is a guideline only. Hydrel and Acuity Brands Lighting assumes no responsibility for selection and recommends consultation with qualified individuals for verification of luminaire/pole assembly selection.

PSG9

www.hydrel.com

LITHONIA FL UORESCENT HYDREL FLUORESCENT

NOTES: 1 When ordering tenon mounting and drill mounting for the same pole, follow this example: DM28G2/T20. The combination requires an extra handhole. 2 NEMA twist-lock photo control by others. Not available with tenon mounting. 3 Must specify location and orientation when ordering an option. For 1st space _ : Specify the height in feet above base of pole. Example: 5ft = 5 and 20ft = 20 For 2nd space _ : Specify orientation from handhole (A,B,C,D) Refer to the handhole orientation diagram on this page. 4 Horizontal arm is 18" x 2-3/8" O.D. tenon standard. 5 Combination of tenon-top and drill mount requires extra handhole.

643

UNDER WATER UNDERW

Fountain and Swimming Pool

Intended Use

4428

Swimming pool, reflection pool and fountain pool lights. This175W metal halide fountain light, the first HID underwater light in the industry, delivers the equivalent light output of a 1000W Quartz halogen lamp while consuming only one-fifth the power and attaining 2-1/2 times longer lamp life.

Features The industry’s first 175W metal halide swimming pool and fountain light provides light output equivalent to a 1000W incandescent lamp but uses only one-fifth the power, with more than two times

the lamp life.

Lens

Listings

Ballast

Tempered borosilicate clear lens and silicone gaskets.

U.L., submersible or wet/dry listed fountain (submersion not required for safe operation).

Metal halide ballast encapsulated and contained in fixture. Heavy wall cast bronze construction.

Ordering Information

Reflector Fountain light provides three reflectors – a 7° spot, a medium flood and a wall wash.

Example: 4428 SS 175M 120 NM 34B CSL120 SWM LP

Swimming pool or niche mount fountain application. Product

Door

Lamp type

Voltage

4428

B Bronze SS Stainless steel trim

175M

120

Mounting

Conduit

NM Niche mount

34B 3/4” NPT bottom

Ordering Information

Cord set length

Application

Lamp

CSL ___ 35’-120’ of cord available in 5’ increments

SWM Swimming pool

LP Lamp installed

Example: 4428 175M 120 FL FLC BM CSL100 LP

Base mount fountain application. Product

Lamp type

Voltage

4428 WD4428

175M

120

Distribution SP Spot FL Flood WWD Wall wash

Lens

Mounting

FLC Flat lens clear FLC5 Flat lens 5° axial spread

BM Base mount

4428

Accessories IHL Internal honeycomb louver ISS Internal source shield WWL Wall wash louver CFAMB Color filter amber CFBLU Color filter blue CFGRN Color filter green CFRED Color filter red

Cord set length

Lamp

CSL ___ 10’-120’ of cord available in 5’ increments

LP Lamp installed

11-3/8 Dia. (287) 8-7/8 Dia. (225) 1-3/8 (35)

Finish Plaster

5-7/8 (149)

13 (287)

HYDREL

Finish Plaster

644

11-3/4 (298)

10-1/2 (265)

Niche

9 (229)

Base

www.hydrel.com

PSG9

Swimming Pool

Swimming Pool

4425 NM SWM 4427 NM SWM 4800 NM SWM

Swimming pool fixtures. Maximum wattages of each lamp type listed. Lower wattages available; consult www.hydrel.com for more information.

Ordering Information

Product 4425

Door

Example: 4425 B P56300ILV 12 WFL CLS NM 1B CSL50 SWM LPI

Lamp type

B Bronze SS Stainless steel bezel

Voltage 1

Low voltage P56300ILV Incandescent P56500I

2

12 120

Distribution3 MFL Medium flood NSP Narrow spot WFL Wide flood

Lens CLS CLSA CLSB CLSG CLSR

Mounting

Convex lens swim NM Niche mount Convex lens swim amber Convex lens swim blue Convex lens swim green Convex lens swim red

Ordering Information

Door

Lamp type

Voltage

Distribution3

4427

B Bronze SS Stainless steel

Incandescent P641000I P56500I

120

MFL Medium flood NSP Narrow spot WFL Wide flood

Door type RD Round SQ Square

Door

Cord set length CSL ___ 35’-120’ of cord available in 5’ increments

Mounting

Lens

Conduit

Application

Lamp

Application

CSL ___ 35’-120’ of cord available in 5’ increments

Lamp

Options

SWM Swim- LPI Lamp CSA CSA included ming Certified pool

Example: 4800 RD B M75 12 FL CL NM 3445B CSL50 SWM LP

Lamp type

B Bronze Low voltage1 SS Stainless M75 steel Incandescent 100Q 150Q

Voltage

Distribution

122 120

FL Flood4

Lens

Mounting

Conduit

Application

Lamp

Options

3445B 3/4” NPT at 45°

SWM Swimming pool

LP Lamp installed

CSA CSA Certified

Cord set length2 CSL ___ 35’-120’ of cord available in 5’ increments

SQ

4800

RD

4427 NM

4425

5-1/2 (140)

5-1/2" (140)

13 (330)

13 (330)

10-7/8 (276)

10-7/8 (276)

5/8 (16)

7-11/16 (195)

4-3/4 6-1/4 (121) (159) 5/8 (16)

www.hydrel.com

7-11/16 (195)

6-7/8 (175)

LITHONIA FL UORESCENT HYDREL FLUORESCENT

NM Niche CL Convex lens mount CLA Convex lens amber CLB Convex lens blue CLG Convex lens green CLR Convex lens red CLC Convex lens clear

NOTES: 1 12V only; transformer sold separately. 2 50 foot maximum cord length on 12V fixtures. 3 Distributionsbased on available lamps. 4 Only available with M75 lamp, otherwise leave blank.

PSG9

Options

SWM Swim- LPI Lamp CSA CSA ming included Certified pool

Cord set length

NM Niche 34B 3/4” CLS Convex lens swim mount NPT CLSA Convex lens swim bottom amber CLSB Convex lens swim blue CLSG Convex lens swim green CLSR Convex lens swim red

Ordering Information

4800

Conduit 120 volt only 34B 3/4” NPT bottom 12 volt only 1B 1” NPT bottom

Example: 4427 B P641000I 120 MFL CLS NM 34B CSL50 SWM LPI

Product

Product

UNDERW UNDER WATER

Intended Use

645

UNDER WATER UNDERW

Fountain

Intended Use

4409 BM 4413 BM 4415 BM/YM

Lighting for fountains and reflecting pools – base/yoke mount.

Ordering Information

Example: 4409 100QT3 120 FLC BM CSL120 LP

Model

Lamp type

Voltage

Lens

4409

75QT3 100QT3

121 120

FLC Flat lens clear

Mounting

Cord set length

Accessories

BM Base mount

DCFAMB DCFBLU DCFGRN DCFRED

Color filter amber Color filter blue Color filter green Color filter red

Ordering Information Lamp type

Voltage

4413

100Q 150Q 150QT3 200QT3 250Q 300QT4 400QT4 500Q

120

Mounting

Lens

Distribution FLC FLAM FLG FLR

SP Spot FL Flood

BM Base mount

Flat lens clear Flat lens amber Flat lens green Flat lens red

Ordering Information

4415

Lamp type Incandescent 116I Quartz 200QT3 300QT3 Low voltage 3/M50 2,6 3/M75 2,6

LP Lamp included

Example: 4413 500Q 120 FL FLC BM CSL80

Model

Model

Options

CSL ___ 10’-120’ of cord available in 5’ increments5

Cord set length

Lamp

Options

CSL ___ 10’-120’ of cord available in 5’ increments

LPI Lamp included

CSA CSA Certified

Example: 4415 3/M50 12 FL BM ALB RSR12 CSL40 LPI Voltage 1

12 120

Distribution2 FL Flood

Cord set length2

Mounting accessories3

Mounting BM Base mount YM Yoke mount*

ALB Adjustable locking base RSR 4”-24” riser stem available in 2” increments4

* Consult www.hydrel.com for yoke mount dimensions.

4409

CSL ___ 10’-120’ of cord available in 5’ increments5

8-13/16 (224)

Options

LPI Lamp included

CSA CSA Certified

NOTES: 1 Transformer sold separately. 2 Other distributions available for the 3/M50 and the 3/M75 only. 3 Available with base mount only. 4 RSR6 default with ALB. 5 50’ max cord length for 12V fixtures. 6 Available in 12V only.

4413 4-1/2" Dia (114)

Lamp

7-1/2 (191)

4415 10-1/2 (267)

HYDREL

4-3/4" (121)

646

6-1/4" (159)

Fixture is height adjustable 4-1/4 Min. (108)

6" Dia (152)

www.hydrel.com

3/4 Typ. (19)

6-5/8 Max. (168)

4-9/16 (116) 9-1/4 (235)

5-3/8 (137)

3-1/4 (83)

5-1/2 (140) 1 (25)

10 (254)

10 (254)

PSG9

Fountain

4424 BM/YM 4427 BM/YM 4800 BM/YM

Lighting for fountains and reflecting pools – base/yoke mount.

Ordering Information

Example: 4424 P56500I 120 MFL CLC YM CSL120 LPI

Model

Lamp type

Voltage

Distribution3

4424

Incandescent P56300I P56500I 1 Low voltage2 P56240ILV P56300ILV 1

12 120 2

MFL Medium flood NSP Narrow spot WFL Wide flood

CLC CLA CLB CLG CLR

Mounting accessories5

Cord set length

Lamp

Options

ALB Adjustable locking base RSR 4”-24” riser stem available in 2” increments6

CSL ___ 10’-120’ of cord available in 5’ increments7

LPI Lamp included

CSA CSA certified

Mounting

Lens

BM Base Convex lens clear4 mount Convex lens amber YM Yoke Convex lens blue mount* Convex lens green * Consult Convex lens red

NOTES: 1 P56500I - default for 120V. P56300ILV - default for 12V. 2 Transformer not included, sold separately. 3 Lamp distribution based on lamp manufacture availability.

www.hydrel.com for yoke mount dimensions.

Ordering Information

4 5 6 7

CLC – default. Mounting accessories with BM only. RSR6 – default with ALB. CSL50 – max for 12V.

Example: 4427 P641000I 120 NSP CLC BM ALB RSR10 CSL100

Model

Lamp type

Voltage

Distribution2

Lens

Mounting

Mounting accessories4

Cord set length

Lamp

Options

4427

P64500I P641000I 1

120

MFL Medium flood NSP Narrow spot WFL Wide flood

CLC Convex lens clear3 CLA Convex lens amber CLB Convex lens blue CLG Convex lens green CLR Convex lens red

BM Base mount YM Yoke mount*

ALB Adjustable locking base RSR 4”-24” riser stem available in 2” increments5

CSL ___ 10’-120’ of cord available in 5’ increments

LPI Lamp included

CSA CSA Certified

NOTES: 1 P641000I – default. 2 Lamp distribution based on lamp manufacture availability. 3 CLC – default. 4 Mounting accessories with BM only. 5 RSR6 – default with ALB.

* Consult www.hydrel.com for yoke mount dimensions.

Ordering Information

Example: 4800 100Q 120 FL CLC BM CSL90 LP

Lamp type1

Voltage

Distribution3

4800

Incandescent 100Q 150Q Low voltage M75

122 120

FL Flood

Lens CLF CLC CLA CLB CLG CLR

Mounting

Convex lens frosted Convex lens clear4 Convex lens amber Convex lens blue5 Convex lens green5 Convex lens red

Cord set length

Lamp

CSL ___ 35’-120’ of cord available in 5’ increments6

LP Lamp installed

* Consult www.hydrel.com for yoke mount dimensions.

4424 BM

NOTES: 1 Other wattages available by request. 2 Transformer sold separately. 3 Distribution included on 12V only. 4 CLC – default. 5 CLB and CLG not available with 150Q. 6 CSL50 max. cord length for 12V.

4427 BM

4800 BM

11 (279) 8 (203) 10 (254)

11-3/4 (298) 7-1/4 (184) 12 (305)

4-1/2 (114)

10 (254)

1-1/8 (29)

PSG9

BM Base mount YM Yoke mount*

6-3/4 (171)

10-3/4 (273) 12 (305)

www.hydrel.com

3/4 (19)

8 (203)

1/2 (13)

4-1/4 (108) 8 (203)

Options CSA CSA Certified

LITHONIA FL UORESCENT HYDREL FLUORESCENT

Model

* Consult www.hydrel.com for yoke mount dimensions.

UNDER WATER UNDERW

Intended Use

647

Fountain Lighting

UNDER WATER UNDERW

Fountain

4415 NM 4424 NM 4800 NM

Intended Use Lighting for fountains and reflecting pools – niche mount.

Ordering Information

Model

Example: 4415 3/M50 12 FL NM 34B RG CSL50 LPI

Lamp type

4415

Voltage

Incandescent 116I 200QT3 300QT3 Low voltage1 3/M50 3/M75

Distribution

2

12 120

FL Flood

3

Conduit entries

NM Niche mount

34S 3/4” NPT side

Louver Rock guard

CSL ___

Lamp

35’-120’ of cord available in 5’ increments5

LPI Lamp included

Example: 4424 P56500I 120 MFL CLC NM 34B CSL120 LPI

Model

Lamp type

Voltage

Distribution

Lens

Mounting

Conduit entries

Accessories

Cord set length

Lamp

Options

4424

Incandescent P56300I P56500I Low voltage1 P56240ILV P56300ILV2

123 120

MFL Medium flood NSP Narrow spot WFL Wide flood

CLC Convex lens clear4 CLA Convex lens amber CLB Convex lens blue CLG Convex lens green CLR Convex lens red

NM Niche mount

34B 3/4” NPT bottom

RG Rock guard5

CSL ___ 35’-120’ of cord available in 5’ increments6

LPI Lamp included

CSA CSA Certified

NOTES: 1 Available in 12V only. 2 P56300ILV (12V) and P56500I (120V) default. 3 Transformer not included. 4 CLC– default. 5 RG required for floor-mounted fixtures. 6 CSL50 max. cord length for 12V.

Ordering Information

Example: 4800 RD SS 100Q 120 FL CLC NM 3445B CSL75 LP

Model

Door1

Material

Lamp type

4800

RD Round SQ Square

B Bronze SS Stainless steel2

Incandescent 100Q 150Q Low voltage M75 3

Distribution5

Mounting

Voltage

Lens

4

12 120

CLF CLC CLA CLB CLG CLR

11" (279)

Convex lens frosted Convex lens clear6 Convex lens amber Convex lens blue7 Convex lens green7 Convex lens red

8

CSL ___ 35’-120’ RG Rock guard of cord available Conduit entries in 5’ incre3445B 3/4” at 45° ments9 4800 NM SQ

2-7/8" (73) 1-1/4" (32) 6-7/8" (175)

13 (330)

6-7/8 (175)

10-7/8 (276)

RG Rock Guard

www.hydrel.com

RD 5/8 (16)

7-11/16 (195)

Lamp LP Lamp included Options CSA CSA Certified

NOTES: 1 RD door adjustable, SQ door fixed. 2 SS material not available with rock guard. 3 Other voltages available by request. 4-3/4 6-1/4 (121) (159) 4 Transformer sold separately. 5 Distribution included on 12V only. 6 CLC – default. 7 CLB and CLG not available with 150Q. 5-1/2" 8 RG required for floor-mounted (140) fixtures. 9 CSL50 max. cord length for 12V. 5-1/2 (140)

4424 NM

5-3/8" (137)

LLV Louver

Cord set length

Accessories

NM Niche mount

FL Flood

4415 NM

HYDREL

LLV RG

Cord set length

NOTES: 1 Available in 12V only. 2 Transformer sold separately. 3 Other distributions available on 3/M50 and 3/M75 only. 4 Either LLV or RG required for floor-mounted fixtures. 5 CSL50 max. cord length for 12V fixtures.

Ordering Information

648

Accessories4

Mounting

PSG9

Fountain and Swimming Pool

ELWC

Electronic Water Level and Cut-Off Controls Model # ELWC ELWC1

Control box

Underwater Accessories

UNDER WATER UNDERW

Complementing their underwater lights, is Hydrel's full line of accessories is manufactured to the high standards required for underwater fountain and pool products.

6-7/8 (172)

6 (152) 6-3/4 (171)

Deck and remote mount Conduit mount

3" (76) min.

4 (102)

13 " (330) max.

ELWC1

9-1/2 (241)

6-7/8 (172)

Colored Lenses

Potting Compound

Green, red, amber and blue available for most fixtures.

PC21 is a re-enterable potting compound which pours yellow and cures transparent so connections are easily located. It meets NEC requirements for potting underwater junction boxes. Model # PC21 PC2112

35 CU. IN. 20 CU. IN.

Low Voltage Transformers

NOTE: Special consideration must be given to the length of cords used with low voltage underwater fixtures.

T1904 6-1/4 (159)

6-1/4 (159)

Model # T1903 T1904

11 (292)

PSG9

T1905

300-watt transformer 1000-watt transformer 500-watt transformer

www.hydrel.com

T1903 and T1905 5-1/8 (130)

9-1/2 (241)

4-1/2 (114)

LITHONIA FL UORESCENT HYDREL FLUORESCENT

Low voltage lighting fixtures require that the line voltages be stepped down. This is normally accomplished with a transformer or a series of transformers located in the pool equipment area. Hydrel offers such parts in sizes from 300 to 1000 watts.

649

Fountain Lights

UNDER WATER UNDERW

Fountain and Swimming Pool

Underwater Accessories Underwater Junction Boxes Hydrel underwater junction boxes are designed for the connection of supply cords from underwater fountain fixtures and service conduits. They feature heavy cast bronze

construction, neoprene gaskets, internal ground lugs and stainless steel hardware. All hubs may be tapped either 1/2"

JB1701 A

NPT or 3/4" NPT with other drillings available upon request. When ordering, specify the catalog number, hub location and hub size.

JB1703

Letters around perimeter indicate side drill locations. Letters within box indicate bottom drill locations.

JB1705

C

D

JB1706

A

C

cover G bottom center H

R

A

B

P

G

B

A

S

K

H

D

E

J L

F

B D

C

B

Outside dimensions: 43/4” (121) dia. x 3” (76) deep

Outside dimensions: 33/8” (86) x 43/8” (111) x 21/2” (64) deep

Outside dimensions: 43/4” (121) sq. x 21/2” (64) deep

Outside dimensions: 53/8” (137) sq. x 21/2” (64) deep

Inside dimensions: 31/2” (89) dia. x 2” (51) deep (25 cubic inches)

Inside dimensions: 3” (76) x 2” (51) x 2” (51) deep (12 cubic inches)

Inside dimensions: 3” (76) sq. x 2” (51) deep (18 cubic inches)

Inside dimensions: 4” (102) sq. x 2” (51) deep (32 cubic inches)

Cover may have single 1/2” or 3/4” hub. Bottom may also have single 1” hub.

JB 1708

JB1710 C

E

L

C A

K J

HYDREL

G

650

F

JB1711

JB1713 pool floor

F

A B

E

Ground screws

D

D H

J

J

H

B

L

K G L

E

M

K R

S

T

P

N F

M

G

A internal cord seal included

B

to fixture

H

Outside dimensions: 73/8” (188) x 53/8” (137) x 21/2” (64) deep

Outside dimensions: 75/8” (194) x 61/2” (165) x 47/16” (113) deep

Outside dimensions: 75/8” (194) sq. x 43/4” (121) deep

Outside dimensions: 41/2” (115) dia. x 35/8” (93) deep

Inside dimensions: 6” (153) x 4” (102) x 2” (51) deep (48 cubic inches)

Inside dimensions: 53/16” (132) x 41/8” (105) x 311/16” (94) deep (62 cubic inches)

Inside dimensions: 6” (153) sq. x 4” (102) deep (144 cubic inches)

Inside dimensions: 23/4” (71) dia. x 21/4” (58) deep (10 cubic inches)

Bottom may have single 1" or 11/4" hub.

Bottom may have maximum three 1" hubs or two 11/4" hubs or one 2" hub.

www.hydrel.com

PSG9

Fountain and Swimming Pool

Deck Mounted Junction Box

Cord Seals

Specifically designed for deck or remote wall mountings, this deck junction box meets all the requirements of the NEC. It features cast bronze construction, neoprene gaskets, one hub at each end and two hubs on one side. The entire bottom and one side of the box are suitable for drilling. Fasteners are stainless steel.

Constructed of brass with neoprene grommets, these seals are for use in underwater junction boxes for fixture cord entrance seals.

NOTE: Specify USR strain reliefs for the total number of fixtures. USR sold separately.

D

C

A

H

J

B

K G L E M

JB1719

g ro und sc rews

This fountain lighting economy base allows for variable fixture height and includes Hydrel's pro-focus aim-set feature. Multiple riser heights available. B 125/8 (321) 11 (279) 12 (305) 12 (305) 12 (305)

B 1 1 /2 1 1 /2 1 3 /4 1 3 /4 1 3 /4 1 3 /4

A

B

C 8 5/8 (219) 7 (178) 8 (203) 8 (203) 8 (203)

C(NPT) 1 /2 3 /4 3 /4

CORD 16-3* 18-3 10-3

A /8 1 1 /4 1 1 /4 7

B 1 3 /8 1 1 /2 1 1 /2

A

NOTES: * 18-2/16-1 cord fits SR50 and CS143022parts.

B

C

USR Strain Relief Universal strain relief (USR). Strain reliefs, used where J-boxes are mounted flush to floor or deck. Specify for the total number of fixtures to be mounted.

LITHONIA FL UORESCENT HYDREL FLUORESCENT

C Standard Stem Length 6"(152)

12 (305)

PSG9

A /8 7 /8 1 1 /4 1 1 /4 1 1 /4 1 1 /4 7

A threaded cord grip that prevents cord movement from pulling on connections. Used where J-box is mounted above the floor or deck.

A

B

Cord 18-3 16-3* (3 x 1.5) 18-3 14-3 (2 x 4) 12-3 10-3 (2 x 6)

SR Strain Relief

Model SR50 SR754 SR75

ALB - Adjustable Locking Base

A 101/2 (267) 7 7/8 (200) 7 11/16 (195) 7 11/16 (195) 7 11/16 (195)

NPT 1 /2 1 /2 3 /4 3 /4 3 /4 3 /4

F

Outside dimensions: 75/8” (194) x 61/2” (165) x 47/16” (113) deep Inside dimensions: 53/16” (132) x 41/8” (105) x 311/16” (94) deep (62 cubic inches)

Model ALB15 ALB21 ALB22 ALB24 ALB27

Model CS14302 CS143022 CS14304 CS14303 CS143032 CS143033

UNDER WATER UNDERW

Underwater Accessories

www.hydrel.com

651

Suggest Documents