Architectural Outdoor. Lighting Solutions ARCHITECTURAL AREA LIGHTING 1

Architectural Outdoor Lighting Solutions ARCHITECTURAL AREA LIGHTING A R C H I T E C T U R A L A R E A L I G H T I N G 1 ENERGY EFFICIENCY LON...
1 downloads 1 Views 4MB Size
Architectural Outdoor Lighting Solutions

ARCHITECTURAL AREA LIGHTING

A R C H I T E C T U R A L

A R E A

L I G H T I N G

1

ENERGY EFFICIENCY

LONGEVITY

SUSTAINABILITY

The light sources employed in AAL’s fixtures are the most efficient sources commercially available today, including energy efficient LED, induction, metal halide and compact fluorescent. Its horizontal reflector models are designed to direct illumination to the ground with no stray light. The result is more light with less energy consumption.

AAL manufactures its products to have a life span as long as the buildings and spaces they illuminate. The primary material used for all our products is aluminum to resist corrosion and the need for maintenance. Aluminum will not need the periodic refinishing required of steel products that will eventually rust and corrode. All our internal parts and fasteners are made of aluminum or stainless steel. Lamp enclosures are kept dust free and dry to prevent light degradation and maintain a high level of energy efficiency.

AAL develops our products with recycling and resource management in mind. We recycle all incoming packaging materials. Our state of the art finishing system uses eco friendly cleansing and preparation chemicals that are harmless enough to send to the drain without further processing. Finally, AAL makes all products, with renewable materials such as aluminum and stainless steel.

LIGHT POLLUTION AAL’s fixtures offers a full cutoff configuration which means there is no light emitted above 90 degrees horizontal.

architectural

solutions

AAL’s product series are scaled in multiple sizes and employ different materials to expand the specifier’s choice in complementing architectural details and site design themes. Lighting applications include mixed-use retail, commercial, educational, healthcare, residential developments, municipal and downtown renovations.

PATENTS PENDING MADE IN TM

USA

AAL is a registered continuing education provider.

2

ARCHITECTURAL OUTDOOR LIGHTING SOLUTIONS

Table of Contents Period

4

Contemporary

5

Applications

6

Floodlights

8

Steplights

8

Wall Sconces

9

Applications

10

Bollard

12

Poles & Arms

13

Applications

14

Additional Luminaires

15

Designer SSL Series Special Insert I-IV

Sustainability with

Style ARCHITECTURAL AREA LIGHTING

, founded in 1966, is a leading provider of architectural outdoor luminaires designed and manufactured to meet the elegant aesthetic and superior performance needs of its audiences. AAL offers a broad range of products including period and contemporary area lighting, floodlights, steplights, wall sconces, bollards, decorative poles and arms.

Sustainability with

Style ARCHITECTURAL AREA LIGHTING ARCHITECTURAL AREA LIGHTING

3

Period Parkway Square™, part of AAL’s Designer SSL Series, is a masterpiece of advanced design and innovation, capturing all the best of AAL. Featuring distinctive design elements and our newest technology, Parkway Square is available in two luminaire sizes for pole or wall mounting, and along with a matching bollard, provides an all new, whole-site package of luminaires. PATENT PENDING

TM

The Arts & Crafts® family of fixtures reflect the style and warmth of the Craftsman era. These fixtures are available in two sizes for post, wall or pendant mounting, as well as a matching bollard. The Arts & Crafts refractor system includes a symmetric and an asymmetric pattern to help control glare, while a wide variety of shade materials and finishes provide customization. Providence®, part of AAL’s Designer SSL Series are transitional style fixtures that combine modern lighting performance with aesthetics in a traditional form. Optical systems include vertical and horizontal reflectors, as well as an indirect version for even, glare-free illumination. LED upgrade kits are available for existing PROV/PROL HID installations. TM

Promenade™, part of AAL’s Designer SSL Series, are versatile period style luminaires that offer elegant styling with state-of-the-art optical systems. Available in a wide variety of styles and configurations to complement any historic architectural design. LED upgrade kits are available for existing PRMN/PRMS/PRMD HID installations.

TM

Towne Commons® family of fixtures are available in a wide range of sizes and configurations. The precision reflector system minimizes light pollution while providing a superior lighting system for illuminating streets and pedestrian areas.

Federal Globe™ is available in two sizes and features high performing, ContraCline® precision optics while maintaining the timeless look of a traditional acorn form.

Civic Lantern™ is a revitalized version of the classic Pericline that features Moldcast® optics and incorporates improved optical solutions. Civic Lantern features an ornamental die-cast aluminum upper housing designed to allow tool-less access to the lamp compartment.

4

ARCHITECTURAL OUTDOOR LIGHTING SOLUTIONS

Contemporary Diretto® features field rotatable optics and tool-less accessibility. The lamp and ballast modules’ unique design has no flat surfaces and is unified by stainless steel struts.

Mitre’s classic geometric form complements any architectural style. Available in two sizes, plus a wall sconce and bollard.

Flex™, part of AAL’s Designer SSL Series, features AAL’s exclusive MicroEmitter technology. LED upgrade kits are available for existing FH HID installations. Multiple arm designs and mounting options, including single, twin, tri shape and quad, form a versatile “create it yourself” look.

Largent™, part of AAL’s Designer SSL Series, incorporates timeless styling with modern technology. LED upgrade kits are available for existing SLVT HID installations.

TM

TM

Universe Collection®, part of AAL’s Designer SSL Series, features a unique modular design, which includes luminous element and hood design choices, making Universe one of the most versatile LED luminaires on the market. LED upgrade kits are available for existing UCM/UCL HID installations. TM

The Spectra™ family of outdoor site lighting comes in three sizes of luminaires for post or wall mounting, as well as a matching bollard. The Spectra series offers the freedom to specify size, finish and optics to complement any design scheme. Now featuring a full cutoff hood and lens shield. The Indirect™ series combines contemporary styling with soft, low brightness illumination. AAL’s Indirect is available with a fixed or adjustable head and with a round or square reflector. Post and wall mount options are available. Now available with highly efficient LEDs.

Cubic Indirect™, available in post top or wall mount, employs the most efficient light sources available, including long lasting LED’s. The wall mount version comes standard with a hidden MR16 lamp to provide code-required path-of-egress illumination.

Teneo™, a sleek contemporary light column provides even illumination and aids with way finding. Made of durable acrylic or polycarbonate lens, and available in 8' to 14' configurations or as a wall mount.

ARCHITECTURAL AREA LIGHTING

5

Period – Providence®

Contemporary – Cubic IndirectTM

Period – Parkway SquareTM

6

Contemporary – Universe® ARCHITECTURAL OUTDOOR LIGHTING SOLUTIONS ARCHITECTURAL OUTDOOR LIGHTING SOLUTIONS

Contemporary – FlexTM

Contemporary – LargentTM ARCHITECTURAL LIGHTING ARCHITECTURALAREA AREA LIGHTING

Period – Arts & Crafts®

7

Floodlights | Steplights

FLOODLIGHTS Oculus® is a highly versatile, controllable, precise lighting system available in three sizes. Oculus has a parabolic reflector system and co-axial lamp orientation to allow for control and efficiency. The small and very small (Nano) versions are available with energy-efficient and long life LED’s!

Cypher® features an innovative reflector/refractor optic that provides smooth, even illumination for wall washing, grazing or indirect lighting applications. Provides a smooth, even expanse of light without hot spots.

Pivot® uses energy efficient fluorescent lamps and electronic ballasts in a low-profile compact luminaire design. Suitable for wet locations. Used to wash a wall, highlight signage or indirectly illuminate a space, Pivot is available in four individual lengths, or can be used in continuous rows.

STEPLIGHTS AAL’s Steplights collection brings you a full palette of designs with exceptional lighting performance. Choose from two shapes, two materials, two sizes, three fascia designs, and three mounting options to best suit your applications. AAL’s Steplights are now available with energy-efficient and long life LEDs!

8

ARCHITECTURAL OUTDOOR LIGHTING SOLUTIONS

Special LED Insert

DESIGNER series

TM

TM

AR CH I T E C TURA L ARCHITECTURAL AREA AREA LIGHTING LIGHTING

A REA

LI GHTI NG I

Special LED Insert

Parkway Square™ LED harmoniously combines the ultimate in style with technological sophistication. Parkway Square LED features unique appointments and design elements coupled with powerful LEDs making it ideal for any project. Available in Pedestrian (Medium) scale. Upgrade kits also available. PATENT PENDING

Providence® LED, the first truly elegant LED luminaire on the market today. Its distinctive styling and high performance sets it apart from all others. One look is all it takes to discern that Providence LED is the epitome of quality and beauty. Available in medium and large housing scales. Upgrade kits also available.

Promenade™ LED, a classic, traditional luminaire family with powerful LED technology. Featuring three distinctive styles, elegant options, and various mounting choices to meet the needs of any period setting. Upgrade kits also available.

Largent™ LED, the first MicroEmitter LED post top luminaire, features clean contemporary styling that stands the test of time. Largent LED perfectly complements both modern and traditional architectural styles. Upgrade kits also available.

Flex™ LED features a sleek contemporary design which incorporates powerful LED technology. A wide variety of arm and mounting configurations make Flex one of the most versatile LED products on the market. Upgrade kits also available.

Universe® LED, the first customizable, decorative LED luminaire with styling that transcends architectural styles past and present. The modular system of Universe, including hood styles and luminous elements, ensures a look that is in harmony with the architecture and spaces it is illuminating. Available in medium and large housing scales. Upgrade kits also available.

II

ARCHITECTURAL OUTDOOR DESIGNER LIGHTING SOLUTIONS SSL SERIES

Special LED Insert

how it

works The exclusive precision aiming system of AAL's Designer SSL Series ensures that even when looking directly at the luminaire, only one-half of the LEDs can be viewed at any given time. This results in 50% less glare when compared to other exposed, unshielded LED systems. In addition, AAL's MicroEmitters™ are aimed at various angles to maximize uniformity, improve comfort, and properly direct illumination to the target zone. Entire EmitterDeck™ is Upgradeable as LED Technology Advances

Canted MicroEmitter design precisely aims each diode at 70°, 60°, or 50° angles for maximum reach and uniform illumination.

Deeply regressed sources maximize efficiency while reducing glare.

Glare guard perimeter and center reflectors redirect stray light.

Factory preset aiming notches

Quick-connect for easy installation EmitterDeck™

Aluminum dissipates heat away from LEDs.

Individual MicroEmitters are easily field changeable.

carrier plate

Redirected side-candela

(3) High output diodes

MicroEmitter reflector cap

Upper parabolic curvature redirects light below pole

Lower parabolic curvature redirects light forward

Targeted, precisely controlled LED illumination

Redirected side-candela

Illustration of a single MicroEmitter at 70° angle

ARCHITECTURAL AREA LIGHTING SPECIAL LED INSERT

PATENTS PENDING

III

Special LED Insert

Sustainability made simple

LEDs for Warmer Environments

AAL’s Designer SSL Series is designed for easy installation and upgrading as technology advances. Simple field upgrades means communities can take advantage of the newest LED technology without the added expense of removing and replacing an entire luminaire. • • • • • •

AAL's Designer SSL Series features our exclusive new LifeShield™ Protection System. Each EmitterDeck employs temperature sensors located at the most heat sensitive locations within the LED array. Each sensor sends temperature readings in regular intervals to AAL’s LifeShield monitoring device. LifeShield detects high ambient temperatures and temporarily reduces current slightly to preserve diode life. Lumen output is restored to full capacity once temperatures stabilize within acceptable limits.

Easy 10-minute field conversion Upgrade LEDs as technology advances Individual MicroEmitters are field replaceable 70,000+ hours of useful life (L70) Tested under strict LM-79-08 standards IES-LM-80 compliant LED components

simple 10-minute changeout

Turn off power and

Remove existing

reflector assembly.

ballast components.

Install new LED EmitterDeck, connect wiring plug, and turn on power.

Step 1 step 2 step 3 remove lamp and electronic and

IV

SSL SERIES ARCHITECTURAL OUTDOORDESIGNER LIGHTING SOLUTIONS

Wall Sconces

Providence® Sconce utilizes the most efficient light sources, including LED’s. Available in up, down, or up + down illumination, as well as a pencil beam option, it combines modern lighting with aesthetics in a traditional form and coordinates perfectly with all other Providence family members.

The Venere® Series offers both contemporary and traditional style wall sconces to accentuate doorways and building entrances while providing egress illumination during a power failure. Now available with a full cutoff option.

miniFlex™ offers new levels of illumination and visual design to wall sconces. They are wet label listed and easily field configured as an uplight, downlight or uplight-downlight for interior/exterior applications. mini-Flex is available for wall or post mount, and features efficient LEDs.

eSconce® and mini-eSconce are designed for exterior/interior environments. Available in up, down, or up + down illumination and include stainless steel and copper fascia panels. ADA compliant. Features efficient LEDs.

MDL is a compact, unobtrusive fixture used to illuminate parking lots, stairways and canopies. MDL’s 7 distribution patterns are a perfect solution for wall and ceiling applications.

ARCHITECTURAL AREA LIGHTING

9

10

Wall Sconce – Providence® Sconce

Floodlight – Pivot®

Floodlight – Oculus®

Wall Sconce – miniFlex ARCHITECTURALOUTDOOR OUTDOORLIGHTING LIGHTINGSOLUTIONS SOLUTIONS ARCHITECTURAL

Wall Sconce – Contemporary Venere®

Floodlight – Cypher®

ARCHITECTURALAREA AREALIGHTING LIGHTING ARCHITECTURAL

11

Bollards Parkway Square™ bollard coordinates perfectly with other Parkway Square family members. Features unique configurable design elements such as various optical systems, hoods, and decorative screens. Install along walkways, in parks, and anywhere else wayfinding illumination is required. Providence® bollard utilizes efficient lamp sources, including LED. Die-cast aluminum construction is corrosion resistant. Available with horizontal full cutoff optical system, and tamper resistant hardware. Coordinates with other Providence family members. Universe® bollard features 4 luminous element options, and two hood styles. Full cutoff options available. Glass refractor lens provides IES Type 5 distribution. Coordinates with Universe small, medium and large luminaires.

The Arts & Crafts® bollards are not only beautiful, but they are also designed with the energy efficiency and optical performance required of a modern luminaire. Provides full cut off classification. Available in round or square shade styles.

The Spectra™ bollard features a cast aluminum hood and tamper resistant hardware. A borosilicate glass element with Type 5 distribution shields the lamp. An upper reflector improves lighting performance and illuminates the hood. Coordinates with the Spectra family of luminaires. Cast Aluminum bollard complements the Towne Commons® family of fixtures. Featuring a 90 degree cutoff reflector or Type 3 and Type 5 borosilicate glass refractors. The onepiece, high strength cast aluminum housing makes the Cast Aluminum Bollard the perfect solution to complete your site. Mitre bollard employs the most efficient light sources including LED’s. Mitre’s features include full cutoff classification and tamper resistant hardware. Coordinates with entire Mitre family of luminaires.

AAL’s Traditional and Contemporary Concrete bollards are designed to be sensitive to the physical and aesthetic environment. Available with energy efficient sources, including LED, and the bases and tops are made of reinforced concrete for extreme durability.

Vonda bollard, made of extruded and cast aluminum, is designed and built for beauty, durability and performance. Simple yet elegant, Vonda bollard’s patented performance Moldcast optics will define, accentuate and illuminate any outdoor environment.

12

ARCHITECTURAL OUTDOOR LIGHTING SOLUTIONS

Poles & Arms

AAL offers a large selection of either traditional or contemporary arms and poles, all designed to coordinate perfectly with AAL’s luminaires.

Please visit www.aal.net for a complete listing of arms, poles, and accessories.

ARCHITECTURAL AREA LIGHTING

13

2

1

3

5

4

6 Bollards 1 Arts & Crafts® 2 Parkway Square™ 3 Traditional Concrete 4 Spectra™ 5 Cast alluminum 6 Mitre™ 7 Vonda™

7 7

14

ARCHITECTURAL OUTDOOR LIGHTING SOLUTIONS

8

10

9

11

Additional fixtures 8 Perspect 9 Dundee ARCHITECTURAL AREA AREA LIGHTING LIGHTING

10 Sphere 11 Pericline

15

Architectural Area Lighting Luminaires AAL offers site lighting where aesthetic design is as important as the illumination. Various fixture models are available with copper or stainless steel elements to complement the building’s architectural details. AAL employs the most efficient sources, including AAL’s exclusive MicroEmitter LED technology. AAL offers multiple sizes for coordinated lighting applications throughout the site. AAL also has an extensive collection of decorative arms and poles that offer limitless design freedom.

PERIOD Parkway Square™

The Epitome of AAL innovation.

Arts & Crafts

®

Reflecting the style and warmth of the Craftsman era.

Providence®

Legendary lighting performance in a traditional form.

Promenade™

High performance street, area and pedestrian lighting.

Towne Commons®

Balancing classic design with lighting performance.

Federal Globe™

Largent™

eSconce®

Classic geometric form complements architectural expressions.

Versatile, high performance lighting with a decorative flare.

Classic Pericline

High quality, rugged commercial outdoor luminaire.

A compact, unobtrusive fixture to illuminate wall and ceiling applications.

DESIGNER SSL SERIES

High performance wall packs available in two complementary sizes.

MDL

PCL

Special Insert – A complete family of decorative, high performance LED luminaires.

Parkway Square™ Bollard

FLOODLIGHTS

Coordinates perfectly with other Parkway Square family members.

Oculus®

High performance, precision optics in traditional acorn form.

Elevating precision floodlighting to a new level.

Providence® Bollard

Utilizes the most efficient light sources, including LED’s.

Cypher®

CONTEMPORARY

Innovative reflector/refractor optics provide smooth even illumination.

Teneo™

Pivot®

Innovative single and continuous row precision floodlighting.

A sleek contemporary light column.

Cubic Indirect™

Angular design that complements modern architecture.

Diretto® Flex™

Universe® Bollard

Coordinates with Universe small, medium and large luminaires.

Cast Aluminum Bollard

Complements the Towne Commons® family of fixtures.

Mitre Bollard

STEPLIGHTS

Features field rotatable optics and tool-less access.

BOLLARDS

Employs the most efficient light sources including LED's.

Traditional & Contemporary Concrete Bollards

Steplights

Complete line of architecturally designed concrete bollards.

Designed for elegance in harsh environments.

Vonda Bollard

A new form of light.

Indirect™

Project lighting with a sense of mood.

Universe Collection®

A complete family of decorative, yet functional luminaires.

Spectra™

WALL SCONCE

Designed and built for beauty, durability and performance.

Providence® Sconce

Features four precise optical systems and LEDs.

Beautifully designed with energy efficiency and optical performance.

Venere® Series

Spectra™ Bollard

Contemporary and traditional style wall sconces to accentuate and provide egress illumination.

The freedom to specify size, finish and optics to complement a design scheme.

miniFlex™

Mitre™

mini•eSconce

Geometric design using state-of-the-art optical systems.

Arts & Crafts® Bollard

Features a cast aluminum hood and tamper resistant hardware.

When aesthetics are as important as illumination quality. ADA compliant, and designed for exterior/interior environments.

Architectural Area Lighting 16555 East Gale Ave. | City of Industry | CA 91745 T 626.968.5666 | F 626.369.2695 | www.aal.net | www.aal.net/aal/ls611.html © 2009 Architectural Area Lighting | Made in the USA | Rev LS 04.2011

16

Printed on recycled paper

ARCHITECTURAL OUTDOOR LIGHTING SOLUTIONS