ARCHITECTURAL AREA LIGHTING

® A R C H I T E CTURA L A REA LI GHTI NG The sophistication ultimate in style and technological LED Illumination ENERGY EFFICIENCY LONGEVITY ...
Author: Ashlee Gibbs
0 downloads 2 Views 4MB Size
®

A R C H I T E CTURA L

A REA

LI GHTI NG

The

sophistication ultimate in style and

technological

LED Illumination ENERGY EFFICIENCY

LONGEVITY

SUSTAINABILITY

The light sources employed in the Parkway Square family of fixtures are the most efficient sources commercially available today, including energy efficient LED, induction, metal halide and compact fluorescent. The result is more light with less energy consumption.

AAL manufactures its products to have a life span as long as the buildings and spaces they illuminate. The primary material used for all our products is aluminum to resist corrosion and the need for maintenance. Aluminum will not need the periodic refinishing required of steel products that will eventually rust and corrode. All our internal parts and fasteners are made of aluminum or stainless steel. Lamp enclosures are kept dust free and dry to prevent light degradation and maintain a high level of energy efficiency.

AAL develops our products with recycling and resource management in mind. We recycle all incoming packaging materials. Our state-of-the-art finishing system uses eco-friendly cleansing and preparation chemicals that are harmless enough to send to the drain without further processing. Finally, AAL makes the Parkway Square, like all AAL products, with renewable materials such as aluminum and stainless steel.

PATENTS PENDING MADE IN TM

2

USA

Wall sconce

Accent (small) Scale

Contents Table of

LED Solutions.......................................2 Decorative Vertical LED...............6 Technology & Performance.......8 Elevated Scale.................................10 Pedestrian Scale LED............12 Accent Scale LED.................14 Arm & Pole Options......................16 Sconce LED.......................................18 Bollard LED. .......................................20 bollard

S M

CodeLink

Pedestrian (Medium) Scale

Instantly retrieve AAL product spec sheets by scanning these codes with any compatible Smartphone and QR reader. See pages 12, 14, 18 and 20 .

Pa r k way S q u a r e

3

LED Solutions Pedestrian Scale

Accent Scale

For mounting heights up to 15'

For mounting heights up to 10'

Horizontal LED Higher Performance • 71.7w MicroEmitter™ (60 LEDs) • 3281 Lumens • 46 lpw • 3500k or 5100k • types ii, iii, iv, and v

• Exclusive upgradeable LED technology • Replaceable MicroEmitter modules • LifeShield diode protection standard • Available with Angled

Vertical LED Decorative • • • • •

53w led (42 leds) 2300 lumens 43 lpw 5100k types iiI and v

• Bright, beautiful decorative illumination • Available with all five decorative screens • Available with all three hood styles • Lightly diffused acrylic lens standard

Hood only

AAL CodeLink

SM

Horizontal LED Higher Performance • • • • •

39w led (36 leds) 1961 lumens 50 lpw 3500k or 5100k types I, iiI and v

• Direct illumination of the ground plane • Canted LEDs offer three distribution options • Available with Angled Hood only

Vertical LED Decorative • • • • •

20.6w led (18 leds) 933 lumens 45 lpw 5100k types iiI and v

• High aesthetic option for lower mounting heights • Available with all five decorative screens • Available with all three hood styles • Lightly diffused acrylic lens standard SM

AAL CodeLink AAL CodeLink

SM

PKWS LED spec sheet PKWM LED Spec Sheet

4

PKWS LED Spec Sheet

Wall Sconce

Bollards

Entrance Illumination

Path and Driveway Illumination

Decorative Sconce LED

Horizontal LED Higher Performance

• 19.5w, 21.6W, 28W, 36.4W led (15, 18, 24, 30 leds) • 580 -1392 lumens • 29 - 51 lpw • 3500k or 5100k • types ii, iii, iv, and v

• • • • •

• Includes an integral secondary source to provide illumination to path of egress • Available with all five decorative screens • Lightly diffused acrylic lens standard • Mounting heights from 8 to 16 feet

• Direct illumination of the ground plane • Canted LEDs offer three distribution options • Available with Angled Hood only

SM

AAL CodeLink AAL CodeLink

SM

PKWS LED spec sheet PKW Sconce LED Spec Sheet

39w led (36 leds) 1961 lumens 50 lpw 3500k or 5100k types ii, iii, iv, and v

Vertical LED Decorative • • • • •

14w led (12 leds) 556 lumens 40 lpw 5100k types iii and v

• High aesthetic option for lower mounting heights • Available with all five decorative screens • Available with Angled Hood only

AAL CodeLink

SM

PKWB LED Spec Sheet

Pa r k way S q u a r e

5

PKWS-LED-PR4

6

PKWM-LED-PR4

Excellence refined

The appointed styling of Parkway Square is more on parallel with

a fine piece of art than an outdoor luminaire.

Pa r k way S q u a r e

7

Decorative Vertical LED Configurations

The unique design of Parkway Square allows you to mix-and-match between optical systems, hood styles, and decorative screen options to truly customize your luminaire. angled hood - ANG *

1

Select

d e s i r e d h oo d

Step

Parkway Square features three designer hoods, each with a distinct

straight hood - STR / Indirect - ind ** (underside of Indirect hood in high reflectance white)

design statement, available in painted aluminum to match the fixture, or natural copper and stainless steel. double hood - dbl** * Not available with PKSA/PKSP * * Not available with PKSA/PKSP and PKWB

Choose the optical system that best suits your project needs. PKWM-Vertical LED (VL3/VL5)

stainless steel hood - sts

Step

copper hood - COP

2

Specify hoods in either painted aluminum, natural copper, or stainless steel to complement other design elements on the project.

Select

optical s y s t e m

PKWS-Vertical LED (GLA) PKWB-Vertical LED (GLA) PKSA/PKSP-Vertical LED

PKSA/PKSP Vertical LED

PKWM-Vertical LED (VL3/VL5)

8

PKWS-Vertical LED (GLA) PKWB-Vertical LED (GLA)

To customize the look of the luminaire, add a decorative screen in either a contemporary style such as Wheat or Infinity, or a more traditional style with Offset, Trio or Shutter. Submit your own design or logo to truly customize the luminaire. Each screen is created with a water laser to ensure smooth lines and consistency with each luminaire.

Decorative Screens

Step

3

TRIO DSTR

Select

d ecorative screen option

WHEAT DSWH

INFINITY DSIN

OFFSET DSOF

SHUTTER DSSH

CUSTOM DSCS

Specify screens in either painted aluminum, natural copper, or stainless steel. stainless steel Screen - sSP

copper Screen - CPR

Pa r k way S q u a r e

9

LED Technology & Performance Pedestrian Scale Medium Housings Horizontal LED BUG Rating

Vertical LED BUG Rating

B2 U0 G2

HORIZONTAL LED

B1 U2 G1

B1 U0 G0

B1 U2 G1

180°

102 lm. 3.1%

0 lm. 0%

UP LIGHT

UH

33 lm. 3.5%

UH

100°

100°

100°

100°

UL

BACK LIGHT

Vertical LED BUG Rating

VERTICAL LED

UP LIGHT 0 lm. 0%

Horizontal LED BUG Rating HORIZONTAL LED

180°

VERTICAL LED

Accent Scale Small Housings

FORWARD LIGHT

UL

FORWARD LIGHT 993 lm. 50.7% 450 lm. 48.3%

1622 lm. 49.4% 1099 lm. 47.7%

1660 lm. 50.6% 1099 lm. 47.7%

BACK LIGHT 967 lm. 49.4% 450 lm. 48.3%

BVH 90°= 0.3% BVH 90°= 4.3%

FVH 90°= 0.2% FVH 90°= 4.3%

BVH 90°= 0.3% BVH 90°= 1.3%

FVH 90°= 0.3% FVH 90°= 1.3%

BH 80°= 22.2% BH 80°= 21.4%

FH 80°= 22.0% FH 80°= 21.4%

BH 80°= 4.8% BH 80°= 15.8%

FH 80°= 5.5% FH 80°= 15.8%

BM 60°= 18.8% BM 60°= 19.1%

FM 60°= 20.3% FM 60°= 19.1%

BM 60°= 28.5% BM 60°= 25.5%

FM 60°= 29.0% FM 60°= 25.5%

BL 30°= 8.1% BL 30°= 2.9%

FL 30°= 8.1% FL 30°= 2.9%

BL 30°= 15.8% BL 30°= 5.7%

FL 30°= 15.9% FL 30°= 5.7%





Horizontal LED Photometry

Vertical LED Photometry

Horizontal LED Photometry

Vertical LED Photometry

Legend:

PKWM T5

Legend:

60LED-BW

PKWM T5

Legend:

55LED-BW

PKWS T5 2.00

36LED-BW

PKWS T5

18LED-BW

2.00 1.00 1.00

0.20

0.10 2.00 0.00

0.20

1.00 0.50

0.50

0.00

0.20

2.00 0.00

0.10

0.50

1.00 0.00

1.00

0.10

0.10

Mounting Height: 12 feet Total flux: 3281 lm Watts: 71.7 W LPW: 46

10

0.20

0.50

Mounting Height: 12 feet Total flux: 2300 lm Watts: 53 W LPW: 43

Mounting Height: 8 feet Total flux: 1961 lm Watts: 39 W LPW: 50

Mounting Height: 8 feet Total flux: 933 lm Watts: 20.6 W LPW: 45

Photometry

Wall Sconce PKSA LED BUG Rating

PKSP LED BUG Rating

B0 U3 G1

PKSA LED

Bollards Horizontal LED BUG Rating

B0 U4 G1

B1 U0 G0

463 lm. 41%

B0 U2 G1

HORIZONTAL LED

180°

PKSP LED

Vertical LED BUG Rating 180°

VERTICAL LED

UP LIGHT

829 lm. 60%

0 lm. 0%

UP LIGHT

51 lm. 9.2%

UH

UH

100°

100°

UL

BACK LIGHT

UL UL

FORWARD LIGHT

331 lm. 29% 271 lm. 19%

FORWARD LIGHT 331 lm. 29% 292 lm. 21%

BACK LIGHT 967 lm. 49.4% 253 lm. 45.5%

BVH 90°= 1.2% BVH 90°= 0.7%

FVH 90°= 1.2% FVH 90°= 1%

BVH 90°= 0.3% BVH 90°= 9.2%

FVH 90°= 0.3% FVH 90°= 9.2%

BH 80°= 5% BH 80°= 2.7%

FH 80°= 5% FH 80°= 3.3%

BH 80°= 4.8% BH 80°= 17.8%

FH 80°= 5.5% FH 80°= 17.8%

BM 60°= 14.3% BM 60°= 9%

FM 60°= 14.3% FM 60°= 9.6%

BM 60°= 28.5% BM 60°= 14.9%

FM 60°= 29.0% FM 60°= 14.9%

BL 30°= 8.3% BL 30°= 7%

FL 30°=8.3% FL 30°= 7%

BL 30°= 15.8% BL 30°= 3.6%

FL 30°= 15.9% FL 30°= 3.6%

993 lm. 50.7% 253 lm. 45.5%





PKSA LED Photometry

PKSP LED Photometry

Horizontal LED Photometry

Vertical LED Photometry E

Legend: PKSA UBDS

24LED-BW

PKSP USDB

PKWB T5

30LED-BW

A=2.00 B=1.00 C=0.50 D=0.20 E=0.10

E

0.10 0.1

0.01

0.05

0.5 0.2

2.00 0.00 1.0

0.05 0.02

0.2

0.20

0.50

2.00

E

36LED-BW

A=2.00 B=1.00 C=0.50 D=0.20 E=0.10

E

PKWB T5

E

E

0.5 1.0

2.0

2.0 0.00

0.00

1.00

E

12LED-BW

E

0.2 0.5 1.0

0.00

E

0.1

0.01

0.1

Mounting Height: 8 feet Total flux: 1125 lm Watts: 28 W LPW: 40.18

Mounting Height: 8 feet Total flux: 1392 lm Watts: 36.4 W LPW: 38.24

Mounting Height: 3.5 feet Total flux: 1961 lm Watts: 39 W LPW: 50

E

Mounting Height: 3.5 feet Total flux: 556 lm Watts: 14 W LPW: 40 EE

Pa r k way S q u a r e

11

Elevated Scale 18' 20’ PKWM (2)

16'

PKSP

20’

14'

PKWM

12'

20’

10'

PKWS PKSA

8'

20’

6'

4' 20’

2'

0'

Luminaire Hood optics

PKSP-UBDS/ PKSA-DB (Large/Small Sconce) PKWM (Pedestrian) PKWS (Accent) PKWM(2) (Pedestrian) P — 30LED-BW/15LED-BW

Options DSTR



ANG L2A L2P VL3 55LED-BW —

STR ANG D L2R L2P GLA 18LED-BW T3 60LED-BW —

— D

Arm

— PSA-BU

Pole

— PR4-4R12/BC5-4 PS3-3S8 PS4-4S16/ACBCs P

12

— PSA-BU(2)

18'

PKWM

16'

PKWM (2)

14'

12'

PKWS

PKWS

10'

NEED 8'

6'

PKWB

4'

2'

0'

PKWS (Accent) PKWM(2) (Pedestrian) PKWB (Bollard) PKWM/PKWS (Pedestrian/Small)

DBL GLA 18LED-BW

DSIN

STR VL5 55LED-BW

— DBL/ANG GLA 12LED-BW

VL3 55LED-BW/GLA 18LED-BW

— DSOF DSWH

— PSA-TU(2)

Cs PS3-3S10 PS4-4S12/ACBCS

— PSWM-BD/PSWM-TD —



Pa r k way S q u a r e

| 1313 |

Pedestrian Scale LED

Medium Housing



HOOD



ANG – Angled Hood

STR – Straight Hood



CodeLink S M

Scan code to download PKWM Spec Sheet

DBL – Double Hood

ORDERING example – Pedestrian (Medium) scale 1. LUMINAIRE 2. HOOD 3. OPTICS 4. BALLAST/DRIVER 5. DECORATIVE SCREEN 6. OPTIONS PKWM

14

ANG

T3

60LED-WW

DSOF



7. COLOR

8. MOUNTING

MAL

PSA-TU

Ordering information ordering information 1. LUMINAIRE PKWM Parkway Square Medium W: 23"-29.75" H: 30.5" WT: 49-79 lbs EPA: 3.18-3.28

2. HOOD (Please see page 12 for hoods) ANG – Angled Hood STR – Straight Hood DBL – Double Hood

4. BALLAST/Driver

COP STS

DSOF Offset

Upper lens shield above the hood. Reduces light above hood. Lightly diffused lens. 60 LED only. 2 3/8" O.D. x 4" long tenon. Required for all poles, except for PS4. Tenon adaptor slips over a 2-3/8" O.D. x 4" long tenon. Required for poles by others or used in conjunction with the TEN pole option by AAL.

Brushed copper hood Stainless steel hood

Vertical LED System Lightly diffused acrylic cylinder VL3 Asymmetric distribution VL5 Symmetric distribution

Painted to match fixture. Also available in stainless steel or copper. Not available with horizontal LED system. *Contact factory for custom designs.

DSIN Infinity

6. OPTIONS General

hood

Horizontal LED System Available with ANG only T2 IES Type 2 distribution T3 IES Type 3 distribution T4 IES Type 4 distribution T5 IES Type 5 distribution

5. decorative SCREENS (optional)

55LED-BW 42 light emitting diode array. Bright white (5100K). Class 2, 120 thru 277 volt. Lightly diffused lens. VL3 & VL5 only. 60LED-WW MicroEmitter™ 60 light emitting diode array. Warm white (3500K). Class 1, 120 thru 277 volt. Horizontal LED only. 60LED-BW MicroEmitter™ 60 light emitting diode array. Bright white (5100K). Class 1, 120 thru 277 volt. Horizontal LED only.

ULS LDL TEN TA23

3. OPTICS

DSTR Trio

DSSH Shutter

DSCS Custom*

7. COLOR All 13 standard and 4 premium AAL colors available. For RAL, please submit a 4-digit RAL number or color chip for custom colors.

decorative screens SSP CPR

DSWH Wheat

8. MOUNTING

Screen in brushed stainless steel Screen in brushed copper



Please see page 17 for arm mounting options.

SPECIFICATIONS HOUSING

Parkway Square housings shall be cast aluminum a356 alloy, free of any porosity, foreign materials, or cosmetic fillers. The driver shall be mounted internally and accessed by loosening four captive bolts and lifting away the lamp compartment. The lamp compartment shall be sealed with a molded silicone gasket. All lenses shall be molded, seamless high impact lighting grade acrylic. The lens shall be sealed to the housing with a molded silicone gasket on the top and bottom. The vertical struts shall be cast aluminum and painted to match the fixture. All internal and external hardware shall be stainless steel. The fixture shall slip over a 4"/100mm square post top and secured with four stainless steel set screws. The hood shall be formed from 5052 h32 aluminum, 304 stainless steel or 110 copper. The underside of the hood shall be finished in a high reflectance white powder coating. Copper hoods shall be unfinished to develop a patina. The horizontal optical system door shall be cast aluminum painted to match the fixture. The internal horizontal optical system shall be sealed from the outer housing with a silicone gasket. The tempered glass lens shall be sealed to the housing with a silicone gasket. A pair of stainless steel latches shall release the door to allow access to the optical system. The horizontal optical system shall be rotatable on 90° centers for orienting the light distribution. The horizontal optical system shall meet ansi ies standards for full cutoff reflector systems when using arm in the bu or bd configuration.

Electrical

The driver shall be integral to the fixture, mounted on a prewired module with a quick disconnect plug, and shall be removable by loosening four screws. The driver shall accept 120 thru 277 volts input, with output drive current of 350ma. Standard color temperatures for leds shall be 3500k and 5100k. Rated luminous efficacy of luminaire shall be >40 lm/w, with rated light output of >2960 for 5100k led. The vertical led configuration shall have a self contained light engine consisting of a diode array mounted to a die-cast aluminum heat sink and sealed behind an injection molded and optically clear lens.

microemitterTM REFLECTOR

Precision injection molded, high specular reflectors shall be positioned to achieve directional control toward desired task. Secondary reflectors shall have a concave, specular medium hammertone finish that shall be used to redirect light downward. No fasteners shall be placed on the reflective surface. The entire assembly shall fasten to the housing as a one-piece module and shall feature wiring quick-connects for easy installation. MicroEmitters™ shall be field replaceable and shall be driven at 350ma current.

Installation & mounting

The pkwm shall be factory supplied as a complete, prewired assembly. The fixture shall slip over a 4"/100mm open top square pole or 2 3/8" tenon and secured and leveled with 4 stainless steel set screws or arm mounted to the side 4"/100mm round or square pole.

FINISH

Fixture finish shall consist of a five stage pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with a thermoset super tgic polyester powder coat finish. The finish shall meet the aama 605.2 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance.

Certification

The fixture is listed with ETL or outdoor, wet location use and shall conform to ul1598 and Canadian csa std. C22.2 No.9. Ip65 rated for horizontal configurations and ip66 rated for vertical configurations.

Warranty

Fixture is warranted for five years. Any unauthorized return, repair, replacement or modification of the product(s) shall void this warranty. This warranty applies only to the use of the product(s) as intended by aal and does not cover any misapplication or misuse of said product(s), or installation in hazardous or corrosive environments. Contact aal for complete warranty language, exceptions, and limitations.

Pa r k way S q u a r e

| 1515|

Accent Scale LED

Small Housing



HOOD





ANG – Angled Hood

STR – Straight Hood

CodeLink S M

Scan code to download PKWS Spec Sheet

DBL – Double Hood

ORDERING example – accent (small) scale 1. LUMINAIRE 2. HOOD 3. OPTICS 4. BALLAST/DRIVER 5. DECORATIVE SCREEN 6. OPTIONS 7. COLOR PKWS

16

DBL

GLA

18LED-WW

DSOF



MAL

8. MOUNTING PSA-TU

Ordering information ordering information 2. HOOD (Please see page 14 for hoods)

1. LUMINAIRE PKWS Parkway Square Small W: 14"-21" H: 21.75"-23" WT: 34-46 lbs EPA: 1.46-1.68

ANG – Angled Hood STR – Straight Hood DBL – Double Hood

9LED-BW 18LED-WW 18LED-BW 36LED-WW 36LED-BW

Horizontal LED System Available with ANG only T1 IES Type 1 distribution T3 IES Type 3 distribution T5 IES Type 5 distribution

9 light emitting diode array. Warm white (3500K). Class 2, 120 thru 277 volt. GLA only. 9 light emitting diode array. Bright white (5100K). Class 2, 120 thru 277 volt. GLA only. 18 light emitting diode array. Warm white (3500K). Class 2, 120 thru 277 volt. GLA only. 18 light emitting diode array. Bright white (5100K). Class 2, 120 thru 277 volt. GLA only. 36 light emitting diode array. Warm white (3500K). Class 1, 120 thru 277 volt. Horizontal LED only. 36 light emitting diode array. Bright white (5100K). Class 1, 120 thru 277 volt. Horizontal LED only.

hood COP STS

DSIN Infinity

DSOF Offset

Frosted Glass Diffuser

DSWH Wheat

DSTR Trio

DSSH Shutter

DSCS Custom*

7. COLOR All 13 standard and 4 premium AAL colors available. For

Upper lens shield above the hood. Reduces light above hood. Lightly diffused lens 2 3/8" O.D. x 4" long tenon. Required for all poles, except for PS4. Tenon adaptor slips over a 2-3/8" O.D. x 4" long tenon. Required for poles by others or used in conjunction with the TEN pole option by AAL.

Brushed copper hood Stainless steel hood

GLA

Painted to match fixture. Also available in stainless steel or copper. Not available with horizontal LED system. *Contact factory for custom designs.

6. OPTIONS General ULS LDL TEN TA23

Vertical Optical System

5. decorative SCREENS (optional)

4. BALLAST/Driver 9LED-WW

3. OPTICS

RAL, please submit a 4-digit RAL number or color chip for custom colors.

8. MOUNTING

Please see page 17 for arm mounting options.

decorative screens SSP CPR

Screen in brushed stainless steel Screen in brushed copper

SPECIFICATIONS HOUSING

Parkway square housings shall be cast aluminum a356 alloy, free of any porosity, foreign materials, or cosmetic fillers. The driver shall be mounted internally and accessed by loosening four captive bolts and lifting away the lamp compartment. The lamp compartment shall be sealed with a molded silicone gasket. All lenses shall be molded, seamless high impact lighting grade acrylic. The lens shall be sealed to the housing with a molded silicone gasket on the top and bottom. The gla element shall be frosted borosilicate glass. The vertical struts shall be cast aluminum and painted to match the fixture. All internal and external hardware shall be stainless steel. The fixture shall slip over a 3"/76mm square post top and secured with four stainless steel set screws. The hood shall be formed from 5052 h32 aluminum, 304 stainless steel or 110 copper. The underside of the hood shall be finished in a high reflectance white powder coating. Copper hoods shall be unfinished to develop a patina. The horizontal optical system door shall be cast aluminum painted to match the fixture. The internal horizontal optical system shall be sealed from the outer housing with a silicone gasket. The tempered glass lens shall be sealed to the housing with a silicone gasket. A pair of stainless steel latches shall release the door to allow access to the optical compartment. The horizontal optical system shall be rotatable on 90° centers for orienting the light distribution. The horizontal optical system shall meet ansi ies standards for full cutoff reflector systems when using arm in the bu or bd configuration.

Electrical

The driver shall be integral to the fixture, mounted on a prewired module with a quick disconnect plug, and shall be removable by loosening four screws. The driver shall accept 120 thru 277 volts input, with output drive current of 350ma. Standard color temperatures for leds shall be 3500k and 5100k. Rated luminous efficacy of luminaire shall be >40 lm/w, with rated light output of >1600 for 5100k led.

Installation & mounting

The pkws shall be factory supplied as a complete, prewired assembly. The fixture shall slip over a 3"/76mm open top square pole and secured and leveled with 4 stainless steel set screws or arm mounted to the side 4"/100mm round or square pole.

FINISH Fixture finish shall consist of a five stage pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with a thermoset super tgic polyester powder coat finish. The finish shall meet the aama 605.2 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance.

Certification The fixture is listed with etl for outdoor, wet location use and shall conform to ul1598 and Canadian csa std. C22.2 No.9. Ip65 rated for horizontal configurations and ip66 rated for vertical configurations.

Warranty

Fixture is warranted for five years. Any unauthorized return, repair, replacement or modification of the product(s) shall void this warranty. This warranty applies only to the use of the product(s) as intended by aal and does not cover any misapplication or misuse of said product(s), or installation in hazardous or corrosive environments. Contact aal for complete warranty language, exceptions, and limitations.

Pa r k way S q u a r e

| 1717|

Designer Mounting Options

Unique Arm Design The unique design of Parkway Square’s arms provide a multitude of configurations allowing the same arm and luminaire to be used throughout the site, providing a consistent and complimentary look and feel.

The versatile design of the

Parkway Square family allows for a multitude of mounting options, including post top, arm and wall mount.

Parkway Square mounts to a 4" square pole for pedestrian scale, or a 3" square pole for accent scale. AAL offers a wide variety of decorative poles to complement the elegant design of Parkway Square and carry the styling throughout the entire project.

18

ARM MOUNTING Pole MOUNT

wall MOUNT

Arm mounts to side of a 4" O.D. pole.

PSA-TU

PSA-TD

Fixture above with arm mounted up.

Fixture above with arm mounted down.

PSA-BU

PSA-BD

Fixture below with arm mounted up. Not available with IND.

Fixture below with arm mounted down. Not available with IND.

Mounting plate provided. Hardware by others.

PSWM-TU

PSWM-TD

Fixture above with arm mounted up.

Fixture above with arm mounted down.

Parkway Square is a designer’s dream, offering endless configurations and true customization without the custom price. Available as a post or wall mount, Parkway Square can be mounted above or below its decorative arms, and the arms themselves can be rotated to have the arm in the up or down position. Parkway Square arms feature unitized, onepiece designs for structural rigidity and easy installation.

AAL offers a wide variety of poles to install Parkway Square as a post top luminaire. The pedestrian scale mounts to a 4" O.D. open top square pole or to a 2 3/8" tenon. Visit www.aal.net for a complete listing of poles.

AAL CodeLink PSWM-BU

PSWM-BD

Fixture below with arm mounted up. Not available with IND.

Fixture below with arm mounted down. Not available with IND.

SM

AAL Arms Spec Sheet

Pa r k way S q u a r e

19

Sconce LED



CodeLink S M

Scan code to download PKSA/PKSP Spec Sheet

ORDERING example – Sconce 1. LUMINAIRE PKSA DBUS

20

2. BALLAST/DRIVER

3. DECORATIVE SCREEN

4. OPTIONS

5 COLOR

15LED-WW

DSTR

NEG

BLK

Ordering information ordering information 1. LUMINAIRE Accent Scale (Small Sconce)

Pedestrian Scale (Medium Sconce)

PKSA DB PKSA DS PKSA UB PKSA US PKSA DBUS PKSA UBDS PKSA USDS

PKSP DB PKSP DS PKSP UB PKSP US PKSP DBUS PKSP UBDS PKSP USDS

Down beam & egress Down spread & egress Up beam & egress Up spread & egress Down beam/up spread & egress Up beam/down spread & egress Up spread/down spread & egress

2. BALLAST/Driver 15LED-WW 15 light emitting diode array. Warm white (3500K). Class 2, 120 thru 277 volt. For PKSA DB/DS/UB/US only. 15LED-BW 15 light emitting diode array. Bright white (5100K). Class 2, 120 thru 277 volt. For PKSA DB/DS/UB/US only. 18LED-WW 18 light emitting diode array. Warm white (3500K). Class 2, 120 thru 277 volt. For PKSP DB/DS/UB/US only. 18LED-BW 18 light emitting diode array. Bright white (5100K). Class 2, 120 thru 277 volt. For PKSP DB/DS/UB/US only. 24LED-WW 24 light emitting diode array. Warm white (3500K). Class 2, 120 thru 277 volt. For PKSA DBUS/UBDS/USDS only. 24LED-BW 24 light emitting diode array. Bright white (5100K). Class 2, 120 thru 277 volt. For PKSA DBUS/UBDS/USDS only. 30LED-WW 30 light emitting diode array. Warm white (3500K). Class 2, 120 thru 277 volt. For PKSP DBUS/UBDS/USDS only. 30LED-BW 30 light emitting diode array. Bright white (5100K). Class 2, 120 thru 277 volt. For PKSP DBUS/UBDS/USDS only.

Down beam & egress Down spread & egress Up beam & egress Up spread & egress Down beam/up spread & egress Up beam/down spread & egress Up spread/down spread & egress

3. decorative SCREENS (optional) Painted to match fixture. Also available in stainless steel or copper. *Contact factory for custom designs.

DSIN Infinity

DSOF Offset

DSWH Wheat

4. OPTIONS General BBU NEG SSP CPR

DSTR Trio

DSSH Shutter

DSCS Custom*



Integral battery backup. 24PLL for PKSA only. No egress lamp. Opening is sealed with a cap and painted to match fixture. Screen in brushed stainless steel Screen in copper material

5. COLOR All 13 standard and 4 premium AAL colors available. For RAL, please submit a 4-digit RAL number or color chip for custom colors.

SPECIFICATIONS HOUSING

WALL PLATE

Parkway Square housings shall be cast aluminum, a356 alloy, free of any porosity, foreign materials, or cosmetic fillers. The vertical lens shall be opal, semi translucent high impact injection molded lighting grade acrylic and shall not be field replaceable. The vertical struts shall be cast aluminum and painted to match the fixture. The lens shall be sealed to the housing with a molded silicone gasket on the top and bottom. The optical lens frame shall be secured with four captive socket cap screws and shall be sealed with a one piece memory retentive, molded silicone gasket. The lamp compartment shall have a molded silicone plug to completely seal the optical system from insects or dirt emanating from the electrical box or conduit. Four stainless steel screws shall release the canopy to allow electrical access. All internal and external hardware shall be stainless steel and zinc.

Wall plate shall be secured into wall over j-Box and shall be wired to the power circuit. Fixture shall be attached to the wall plate by four set-screws.

Electrical The driver shall be integral to the fixture, mounted on a prewired module with a quick disconnect plug, and shall be removable by loosening four screws. The driver shall accept 120 thru 277 volts input, with output drive current of 350ma. Standard color temperatures for leds shall be 3500k and 5100k. Rated luminous efficacy of luminaire shall be >40 lm/w, with rated light output of >1600 for 5100k leD. The mr16 lamp for emergency egress feature shall be included and powered by 120 volt input transformed into low-voltage (12 volt) by the electronic transformer (included). The mr16 lamp shall use a miniature bi-pin base.

FINISH Fixture finish shall consist of a five stage pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with a thermoset super tgic polyester powder coat finish. The finish shall meet the aama 605.2 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance.

Certification The fixture is listed with etl for outdoor, wet location use and shall conform to ul1598 and Canadian csa std. C22.2 No.9. Ip65 rated for horizontal configurations and ip66 rated for vertical configurations.

Warranty Fixture is warranted for five years. Any unauthorized return, repair, replacement or modification of the product(s) shall void this warranty. This warranty applies only to the use of the product(s) as intended by aal and does not cover any misapplication or misuse of said product(s), or installation in hazardous or corrosive environments. Contact aal for complete warranty language, exceptions, and limitations.

SAFETY The fixture shall include an integral secondary source to provide path of egress illumination from building to the public way. The hidden mr16 lamp, powered as a remote head is able to be angle up to 15° in either direction.

Pa r k way S q u a r e

| 2121|

Bollard LED



CodeLink S M

Scan code to download PKWB Spec Sheet

ORDERING example – Bollard 1. LUMINAIRE 2. HOOD 3. OPTICS 4. BALLAST/DRIVER PKWB

22

ANG

GLA

12LED-WW

5. DECORATIVE SCREEN

6. OPTIONS

7. COLOR

DSOF



MAL



Ordering information ordering information 2. OPTICS

1. LUMINAIRE PKWB Parkway Square Bollard W: 14" H: 42" WT: 42 lbs EPA: 2.84

Horizontal LED System

Vertical Optical System

T1 T3 T5

GLA

IES Type 1 distribution IES Type 3 distribution IES Type 5 distribution

3. BALLAST/Driver 6LED-WW 6LED-BW 12LED-WW 12LED-BW 36LED-WW 36LED-BW

Frosted Glass Diffuser

4. decorative SCREENS (optional)

6 light emitting diode array. Warm white (3500K). Class 2, 120 thru 277 volt. GLA only. 6 light emitting diode array. Bright white (5100K). Class 2, 120 thru 277 volt. GLA only. 12 light emitting diode array. Warm white (3500K). Class 2, 120 thru 277 volt. GLA only. 12 light emitting diode array. Bright white (5100K). Class 2, 120 thru 277 volt. GLA only. 36 light emitting diode array. Warm white (3500K). Class 1, 120 thru 277 volt. Horizontal LED only. 36 light emitting diode array. Bright white (5100K). Class 1, 120 thru 277 volt. Horizontal LED only.

Painted to match fixture. Also available in stainless steel or copper. Not available with horizontal LED system. *Contact factory for custom designs.

DSIN Infinity

DSOF Offset

DSWH Wheat

DSTR Trio

DSSH Shutter

DSCS Custom*



6. COLOR All 13 standard and 4 premium AAL colors available. For

5. OPTIONS General ULS LDL

hood COP STS

RAL, please submit a 4-digit RAL number or color chip for custom colors.

Upper lens shield above the hood. Reduces light above hood. Lightly diffused lens

Brushed copper hood Stainless steel hood

decorative screens SSP CPR

Screen in brushed stainless steel Screen in brushed copper

SPECIFICATIONS HOUSING

Parkway Square housings shall be cast aluminum, a356 alloy, free of any porosity, foreign materials, or cosmetic fillers. The shaft shall be 5" wide and 22" tall, extruded 6061-t6 aluminum yielding a fixture height of 42 inches. The driver shall be mounted internally and accessed by loosening four set screws and lifting the fixture head off of the shaft and loosening an additional four bolts on the underside of the fixture head. One stainless steel screw shall release the top cap to allow access to the lamp compartment and shall be sealed with a molded silicone gasket. All lenses shall be molded, seamless high impact lighting grade acrylic. The lens shall be sealed to the housing with a molded silicone gasket on the top and bottom. The gla element shall be frosted borosilicate glass. The vertical struts shall be cast aluminum and painted to match the fixture. All internal and external hardware shall be stainless steel. The hood shall be formed from 5052 h32 aluminum, 304 stainless steel or 110 copper. The underside of the hood shall be finished in a high reflectance white powder coating. Copper hoods shall be unfinished to develop a patina. The fixture features tamper resistant hardware. The horizontal optical system door shall be cast aluminum painted to match the fixture. The internal horizontal optical system is sealed from the outer housing with a silicone gasket. The tempered glass lens shall be sealed to the housing with a silicone gasket. A pair of stainless steel screws shall release the door to allow access to the optical compartment. The optical assembly shall be removed by loosening four screws and lifting it out. The horizontal optical system shall be rotatable on 90° centers for orienting the light distribution.

Electrical

The driver shall be integral to the fixture, mounted on a prewired module with a quick disconnect plug, and shall be removable by loosening four screws. The driver shall accept 120 thru 277 volts input, with output drive current of 350ma. Standard color temperatures for leds shall be 3500k and 5100k. Rated luminous efficacy of luminaire shall be >40 lm/w, with rated light output of >1600 for 5100k led.

FINISH

Fixture finish shall consist of a five stage pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with a thermoset super tgic polyester powder coat finish. The finish shall meet the aama 605.2 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance.

Certification

The fixture is listed with etl for outdoor, wet location use and shall conform to ul1598 and Canadian csa std. C22.2 No.9. Ip65 rated for horizontal configurations and ip66 rated for vertical configurations.

Warranty

Fixture is warranted for five years. Any unauthorized return, repair, replacement or modification of the product(s) shall void this warranty. This warranty applies only to the use of the product(s) as intended by aal and does not cover any misapplication or misuse of said product(s), or installation in hazardous or corrosive environments. Contact aal for complete warranty language, exceptions, and limitations.

Pa r k way S q u a r e

| 2323|

®

ARCHI T E CT URAL

ARE A

L I GHT I NG

Parkway Square brochure with additional lighting options

Parkway Square™ is a registered trademark of Architectural Area Lighting and Hubbell Lighting, Inc. ©2012 Architectural Area Lighting | PWS 0312 16555 East Gale Ave. | City of Industry | CA 91745 T 626.968.5666 | F 626.369.2695 | www.aal.net | www.aal.net/aal/pws.html | Printed on recycled paper