Media Information
2017 Produktion von Leiterplatten und Systemen Fachzeitschrift für Aufbau- und Verbindungstechnik in der Elektronik
Print + Online
1 Advertising price list No. 17 Effective from November 1 st , 2016
Januar 2016 | Seiten 1417-1624 | Band 18 ISSN 1436 - 7505 | B 49475 www.leuze-verlag.de ORGAN DER FACH-
VERBÄNDE BAUELEMENTE DESIGN BESTÜCKUNG PACKAGING FORSCHUNG & TECHNOLOGIE
seit 1902
Fachverlag für
■ Oberflächentechnik – Galvanotechnik
■ Produktion von Leiterplatten und Systemen
General Information Publisher: Eugen G. Leuze Verlag KG, Karlstraße 4, 88348 Bad Saulgau, Germany. Founded in 1902. Phone: +49 75 81/48 01 - 0, Fax: +49 75 81/48 01 - 10 Website: www.leuze-verlag.de
Frequency of publication: monthly, 12 issues a year
Profile: The Journal PLUS gives practical information about: − Components − PCB Design – PCB Technologies − Assembly and packaging technology − Analytics & Test − Guidelines and Standards − Management − Market Trends − Services and Service Providers
Advertising deadline: please see schedule and editorial calender, page 10+11; for classified ads: end of month before publishing
Circle of Readers: − Manufacturer − Distributors − Users of Assemblies − Designer for PCB and Assemblies − Producer of PCBs and Service Providers − Hard and Soft Ware Suppliers of Design, Production and Mounting of Assemblies − Purchaser and User of PCBs and Assemblies − Producer of Hybrid Circuits PLUS is organ of the associations: − Fachverband Elektronik-Design e.V. − ZVEI Fachverband Electronic Components and Systems − ZVEI Fachverband PCB and Electronic Systems − International Microelectronics and Packaging Society – Deutschland e.V. − Forschungsvereinigung Räuml. Elektronische Baugruppen 3-D MID e.V. − DVS – Deutscher Verband für Schweißen und verwandte Verfahren e.V. − Fachverband Bauelemente Distribution e.V. − EIPC The European Electronics Association 2
Publication date: please see schedule and editorial calender, page 10+11 Editorial deadline: please see schedule and editorial calender, page 10+11
Print run: 3.333 copies (IVW 2/2016) Publisher/Editor: Sylvia Leuze-Reichert, email:
[email protected] Editor-in-chief: − Dipl.-Ing. (FH) Richard Fachtan, postal address, email:
[email protected] Editorial team: − Dr.-Ing. Hartmut Poschmann, email:
[email protected] − Dipl.-Chem. Wolfgang Reise, email:
[email protected] − Dipl.-Phys. Gustl Keller, email:
[email protected] – Dipl.-Ing. Werner Schulz, email:
[email protected] – Dipl.-Ing. Viola Krautz, email:
[email protected] Advertising manager: Petra Istvan, Phone: +49 75 81/48 01 - 14, email:
[email protected] Manager of distribution: Inge Leuze, Phone: +49 75 81/48 01 - 13, email:
[email protected] Subscription: Annual subscription rate in Germany is € 82,05. Costs for shipping and value-added tax are included. Annual subscription rate abroad € 102,00 (postage included). Premium subscription (print + online) for Germany: € 124,89/year for abroad: € 138,00/year Subscriptions for less than 12 months are not possible. Cancellation of subscriptions are possible with a notice term of 6 weeks to the end of the year. Refunds are generally not possible. Price one single issue: € 10,00 plus postage.
www.leuze-verlag.de
Technical Data Journal format
170 mm wide, 240 mm high
Type area format
135 mm wide, 200 mm high
Printing process
Offset
Colours
CMYK (ISO Coated), Special colours (peferred HKS) possible on request
Processing
Adhesive binding
Loose inserts (without rebate)
Format: DIN A5, max. 160 x 230 mm weight up to 10 g € 1.350,− weight up to 15 g € 1.770,− weight up to 20 g € 2.300,− Sample for inspection is required before order taking (please send to Eugen G. Leuze Verlag KG)
Bound inserts (without rebate)
Maximum weight of paper: 150 g/m2 printed, untrimmed 2 pages: 175 mm wide (2 mm rounting edge in gutter, 3 mm trim on the outer edges), 260 mm high (3 mm header trim, 17 mm footer trim) 4 pages: 175 mm wide (folded), 350 mm (open) Circulation: Prices:
on request 2 pages: € 1.320,− 4 pages: € 2.600,−
Sample for inspection is required before order taking (please send to Eugen G. Leuze Verlag KG) 3
Mailing Address for inserts
Free to our printing house: KESSLER Druck + Medien GmbH & Co. KG, Michael-Schäffer-Straße 1, 86399 Bobingen, Germany Deadline: 10 workdays before publishing
Ad specials
– – – – – –
Additional cover page, abbreviated One or two more flaps Paint finish Cards, CDs, booklets sticked-on Bookmark Banderole
Prices on request; Consultation or sample before order taking Data transfer
By email to the advertising manager (
[email protected], max. 20 MB). Please send files with more than 20 MB amount of data by WeTransfer.
Data formats
Preferred PDF/X-3, alternatively EPS or TIFF, inclusive fonts
Data storage
The material will be stored for 5 years. Repeated orders are possible within this time period without resending the data. You will receive a proof before printing
Design of advertisements
We offer help in designing your advertisements. Please contact the advertising manager
www.leuze-verlag.de
Price list No. 17 Effective from November 1, 2016
Rate Card Classified ads
Display ads Basic rate for b/w ads in € (each ad)
Basic rate for b/w ads in € (each ad) Job offers, bids, sales etc.
Job applicants
820,−
–
615,−
–
1/2 page
410,−
270,–
200,–
1/4 page
205,−
135,–
100,–
1/8 page
102,50
67,50
1 ad
3 ads
6 ads
12 ads
1/1 page
1.180,−
1.060,–
880,–
800,–
1/2 page
590,−
530,–
440,–
400,–
1/4 page DIN A4
530,−
475,–
400,–
360,–
1/4 page
295,−
265,–
220,–
1/8 page
147,50
132,50
110,–
1/1 page 3/4 page (135 x 150 mm)
Surcharge online job market: € 60,– (€ 30,– for 1/4 and 1/8 page). Online first possible. Jobs are published online for 8 weeks. No online surcharge for job applicants Box-no fee € 12,−
Premium positions Prices in € Cover picture (4c)
1.600,–
Cover page 2*
1.500,−
Cover page 3*
1.300,−
Cover page 4*
1.600,–
* b/w price, plus colour surcharge
4
Surcharge colour (no rebate)
€ 480,−
Surcharge bleed (no rebate)
10 % of the basic rate
€ 160,− € 220,−
4-colour (for 1/1-, 1/2-, 1/4 A4 ads; for 1/4 or 1/8 ads: € 260,–) for each European scale for each Special colour (preferred HKS)
Surcharge placement 20 % of the basic rate (no rebate) VAT at the statutory rate is added to the net invoice amount www.leuze-verlag.de
Formats
Cover picture 140 x 80 mm
1/1 page 135 x 200 mm (type area)
1/1 page bleed 170 x 240 mm
1/2 page 65 x 200 mm
1/2 page bleed 82,5 x 240 mm
1/2 page 135 x 100 mm
1/4 page 65 x 100 mm
1/2 page bleed 170 x 120 mm
1/4 A4 85 x 125 mm 1/8 page 65 x 50 mm
1/4 page 135 x 50 mm
1/4 bleed 170 x 60 mm
Trim allowance: 3 mm on outer sides. Take care to ensure that important parts of the ad are located at least 10 mm (left/right) and 5 mm (above/below) from the edge of the page.
Further formats on request
Contact: Mrs. Petra Istvan, Phone: +49 75 81/48 01 - 14, email:
[email protected] 5
www.leuze-verlag.de
Reprints
Trade fair Specials
We offer reprints of your editorial contributions to PLUS. They come in the original layout of the pertinent issue, enriched by an individual front page plus, if requested, including an advertisement of your products or services. Production and delivery of these reprints usually takes just a few days.
Concurrent with major German trade fairs, such as productronica / electronica, SMT/Hybrid/Packaging, embedded world, ... we offer a rich and multifaceted bouquet of PLUS trade fair specials: – editorial preview ahead of the fair (see special topics in the Editorial Calendar, pages 10 and 11) Approximately a half-page (Word-file), plus one illustration – online special as a cross-media complement to the report in the print publication. This will include your company logo and a link to your website – various advertisement packages for the print issue at special conditions, e.g. ✓ two adverts full page 4-coloured, plus a banner ✓ two adverts half page 4-coloured, plus a banner – combination of company presentation or an interview with a product specialist or corporate executive, plus an advert (full page 4-coloured) – review after the fair For questions regarding booking of content and advertisements for these special online and print issues, please contact Mrs. Petra Istvan Tel. 0 75 81/48 01 - 14, E-Mail:
[email protected] ag de
Some price examples Number of copies
4 pages
6 pages
8 pages
16 pages
50
177,–
192,–
207,–
222,–
150
192,–
222,–
277,–
322,–
300
212,–
272,–
382,–
462,–
500
432,–
582,–
722,–
757,–
1000
457,–
612,–
777,–
832,–
LEITERPLATTENTECHNIK
Fachzeitschrift für Aufbau- und Verbindungstechnik in der Elektronik
Leiterplattenbeschaffung – kein optimaler Zustand Obwohl jeder zur Verbesserung beitragen könnte, hat sich am unbefriedigenden Status Quo bei eii der d LeiterLeite Leiter erlich und für plattenbeschaffung seit Jahren nichts Grundlegendes geändert. Dies ist für die Beteiligten ärgerlich möglichkeiten k i Außenstehende kaum zu glauben. Nachfolgend werden der aktuelle Sachstand und Lösungsmöglichkeiten für dieses leidige Problem vorgestellt. Leiterplatten sind Unikate Jeder, der im Bereich der Beschaffung von Leiterplatten beschäftigt ist oder zumindest schon einmal Leiterplatten erworben hat, wird wissen, dass es sich dabei um Unikate handelt. Diese sollte man bei der Bestellung tunlichst ganz genau spezifizieren, um nicht bei der folgenden Lieferung böse Überraschungen zu erleben. Jeder, der in der Arbeitsvorbereitung einer Leiterplattenfabrik beschäftigt ist oder der die nötige Phantasie aufbringt, sich in die Lage der dort arbeitenden Techniker und Ingenieure zu versetzen, weiß, dass kein Auftrag dem anderen gleicht. Positiv ausgedrückt ist die Tätigkeit der Auftragsbearbeitung sehr spannend, weil in jedem Auftrag andere Probleme auftreten können und jede Spezifikation sowohl rein optisch als auch inhaltlich unterschiedlich ist. Neutral ausgedrückt handelt es sich um eine riskante Tätigkeit mit chaotischen Teilbereichen. Wildwuchs in der Schnittstelle Wer weder Auftraggeber noch Arbeitsvorbereiter ist, sondern wer nur die heute schier unbegrenzten Mög-
PLUS Produktion von
Von Burkhard Nissen, Annico e.K., Osterode (Handelsvertreter PCB Express GmbH)
Fachzeitschrif
Systemen
echnik in der Elektro
www.gramm-tec hnik.de
SON DER DRU CK 2015 | Seiten 1-16 | ISSN 1436 - 7505 Band 17 | B 49475 www.leuze-verlag.de
DESIGN ÜCKUNG PACKAGING FORSCHUNG & TECH
2005 BEST
Page size: 17 x 24 cm (6.7 x 9.4 inches), printed coloured, coated glossy paper, per, print run up to 300 copies is produced as digital print All prices in Euros; VAT (in case) and shipping cost will be added
sowie selekmit Verify-Platz mation mit AOI ffgenerator Inline-Laserauto mit AOI und Sticksto tive Lötautomation Dieser verker Versaprint S1-3D: Der Schablonendruc nendruck und 100 % 3D-SPI eint präzisen Schablo ion) in einem System (Solder Paste Inspect
Innovationen präsentiert zudem I p Das Unternehmen , Rework und Inspek elt der Handlötgeräte -Rework-Sysaus der Welt el die neuen Hybrid tion, zum Beispi 660/2 Voidless, 550, HR 600/2, HR i-CON teme HR 200, HR und Entlötstation ötanal-L und sowie die Mehrk High-power-Tool in der Mikroelektron Produktionsschritte ,live‘ erleben 250 W starken Systemintegration Verbesonkönnen für neuem der er ss t dabei mit bei steme. g Besuch Kongre dürfte Vario s Die Messe mit tionen parat. Die gh-End-Inspektionssy Multi-Code-Erkkennun Elektronik – letztere immer und viele Innova „Bad Board“- & oder die Ersascope-Hi echnologie auf die Welt des Lötens modu ren Aufbau reiches Programm Mal die Optik-T mit ihrem modula nt für die weite erant liefera die macht. Am trifft zum ersten temlief saflow 3/45, die Als System in der Halle 7A uration möglich jede Anforderung für n Konfig naue Kunde . interErsa werden sa seinen die passge kann Ersa hat Ersa auf der ders interessant r Roboplace zeigt eine thebieten. Gerade erst kollaborativen Robote tlich Autom atisierung beim Messebesuchern richtige Lösung A ehmen überhaupt hinsich t 2016 soll den 7A geben. als erstes Untern essante Aspekte Das Hallenkonzep tiven ProHallen 6, 7 und APEX inn den USA für seine innova erungshilfe für die ehWertschöpfungskette wardss auf einmal Selektivlöten auf. matische Orienti Award 4 NPI-A n Produkte sind sind entlang der präsentiert das Untern prä krönte punkte S1-3D preisge rint schwer Alle mit inteDie Hallen Mit dem Versap tions‘. -fandukte erhalten. n sich wie folgt: Schablonendrucker tions,Festival of Innova it ersten Schab Gleich konzipiert und glieder klung und Produk Halle 7, Stand 117 men den weltwe Bestandteil des Ersa tpasteninspektion. man ,Systementwic 3D-Lotpa .de • In Halle 6 findet ,Materialien und Bauelemente‘ grierter, 100%iger www.ersaa.de e lassen sich mit 7A, der Fertigunngslini vorbereitung‘ sowie Überlauf zu Halle n im Anschluss in aten gegenüber arer Lötautomatio einem thematischen ng‘ zu sehen Voidless die Void-R . • In Halle 7, mit ct zeigt bei modul der Hotflow 3/20 bis zu 98 % senken Eutect Standards e ,Prozesse und Fertigu n Lötprozessen um nz jenseits des wie ,Zuverläspetenz mliche n mpete sind die Bereich gskom Theme herköm ngsko die Lösun g müssen sichh gut für Anwender, uerung‘ • Die Halle 7A ist und Produktionsste n in der Serienfertigun Elektronikk sowie ,Software Auch die Anlage klung der sigkeit und Test‘ enden Weiterentwic stooen stoortlauffenden fortlau lösung der Fraunuktions sieren vom rdprod interes ing‘, organisiert H en können. Standa ssen und anpass e ,Future Packag n. Die Eutect GmbH im Netz – Leben Die Fertigungslini s an ihre Grenze echnik echniik dem Thema ,Leben ßen dabei oftmal Höhe- und Verbindungst d hofer IZM, hat sich verschrieben. Als et daher in der Aufbau des Standards an, um die bietet digitalisierten Welt‘ Realität s Arbeiten in der tionsschritte in der d de VT) Lösungen jenseit heute und morgen in der einzelne Produk (AVT) rstehen sich dahinte lassen die punkt en von ngen derung forderu aber auch mehr über rausfor sierte ganz pragHeraus rn. Elektronik – hier meiste verfolgen. Man kann können sich beispielweise Interes in zu auf ng trifft igung fertigu Optik nikfert h ktronik n – so Elektro echnik hat Anfassen keit der Maschinen Technik erfahre - und Verbindungst riebben. matisch und zum der Leistungsfähig Im Bereich der Aufbau nüberlegungen verschrieben. ugen. direkt vor Ort von Kunde 635 hen Umfeld überze llösungenn in sichh Eutect den PLUS 4/2016 einem produktionsna klung von Spezia nhandd der Entwic dungstechnik und durch die Anhan Verbin otionspproer Aufbau- und der Produktionspr unterschiedlichen von tion nation ombina Kombi 7, Stand 219
in diesem Jahr
NOLOGIE
6
Ersa veranstaltet tionen ein Festival an Innova die Besucher ausessestand können Auf dem Ersa-M logie-Highlights en und Technolo ow gezeichnete Lösung Selektivlöten: vlöten die Versafl beim den erleben – so etwa weltwe welt it führen s Mitglied der 4/55 als neueste n-Familie. Oder aschine tivlötm Inline-Selek-
Gramm Technik GmbH Geschäftsbereich leitung Edelmeta Einsteinstraße lltechnik 4 D-71254 Ditzinge Telefon 0 7152/5 n b.endres@gramm 0 0930 -technik.de
Der Status Quo
PLUS 10/2015 15
und Verbindungst
nik
lichkeiten der Elektronik benutzt, wird sehr erstaunt sein: In dieser so wunderbar funktionierenden erenden Welt der Elektronik mit immer schnelleren en Rechnern ORGAN und immer komfortableren Anwendungen ungen in der DER FACHLeiterplattenindustrie ist die Schnittstelle elle zwischen VERBÄNDE Auftraggeber und Auftragnehmer seit Jahrzehnten fast unverändert, de facto nicht genormt. mt. Zudem ist die Elektronik von einem beispiellosen Wildwuchs unterschiedlichster lichster Formulare und Formate geprägt. rägt.
Software-Lösungen Es gibt zwar bereits ts Softwareegr8tor oder Lösungen wie Integr8tor fen TeilbereiInsight-PCB, die helfen rbeit zu autoche der AV/CAM-Arbeit iese Systeme matisieren. Doch alle diese uo des Wildbasieren auf dem Status Quo matisierungswuchses, sie versuchen über Automatisierungsber ohne dass ansätze daraus das Beste zu machen, aber nhalte h l ändern. d sich die grundsätzlichen Probleme und Inhalte Mehr Informationen hierzu finden sichh unter www. eering/integrucamco.com/en/software/precam-engineering/integr8tor und www.frontline-pcb.com/category/ BAUELEMENTE InSightPCB_Overview.
Leiterplatten und
t für Aufbau-
Frankfurt GmbH
Produktion von Leiterplatten und Systemen
SONDERDRU CK
Bilder: Mesago Messe
PLUS
Auf dem Vers w 4/55: orm Versaflo tfform lötplattf lötplattf ntedSe Die Online-Selektiv m dem Augme Besuc er mit Besu Bes der deer Besuch blicke e Messestand erhält röntge artige 3D-Ein Er Imagesoft röntgen Ers Tooll Ersa Tool -Tool -To yy-Tool y-To slungs-Reality der Maschine Jahr ein abwech n Innere ins ik hält in diesem
agiert Packaging 2016 tronik Die SMT Hybrid von Optik und Elek auch im Zeichen
, welche posidas Unternehmen Investition zessen verdeutlicht sich aus solch einer tiven Konsequenzen ergeben können. für eine Produktion inenentwickmit seinen Masch stelligen, So ermöglicht Eutect der Eval bewerk zu g Lötauf Löta gaben werden innerhalb werd lungen komplexe zu fertigen sind. nicht hren Eutect beachtet. zesse, Kinedie mit Standardverfa hiedliche hiedlichste Lötpro in Neben den untersc auch Dabei können untersc nen als Module beispielsweise und Zusatzfunktio . Somit lässt Eutect matikverfahren den werden t Prüfsystemen in assis verbau die Maschinench Detail auf das und einen der f ine bis in das letzte prozesse stellen sich die Masch stellu der Elektronikher individualisieren. in kt nprodu Lötlte Kunde gerege e Konsequenz, Löt Eutect adaptive und . Die logisch s Einsatz Dabei kommen bei spezifi zum oder InspektionsSpezialmaschinen verfahren in den fehler lb einer Projektbinieren, um eine ren werden innerha b kö einzelnen Verfah und auf Grund Kunden selektiert ermöglichen. Deshal die evaluierung für den s innerhalb einer einer Miniwelle des Lötergebnisse t, ausge- mit we der Qualität und geprüf üft tion überpr ine Prozessdefini e Prozesse Masch Maschinen- und ieben. Nachgelagert wertet und beschr
matic
setzt auf Nico Besuchen Sie uns
www.leuze-verlag.de e
ns: SMT hen SSie uns: uchen B suchen Besuch
640
rg · Halle
Nürnbe 2016, N
PLUS 4/2016
01 201 auf der SMT 20
PLUS Trade Directory Automatically updated every month and reaching out to more than 3,000 of your potential customers, suppliers and manufacturers, the PLUS Trade Directory serves as an attractive platform for contacting the printed circuit board and electronics industries in Germany, Austria, Switzerland and the Netherlands. All listed contact data and addresses are delivered on a month by month basis to the decision makers and buyers in the industry. Your listing delivers results without detours and costly market research. A clear logical structure with meaningful categories and an alphabetical sorting by address will enable you to directly accessing your targeted suppliers and customers of electronic assembly and related products.
The PLUS Trade Directory is published with every issue of PLUS. Its clear structuring guarantees that our readers will find your company address under your preferred product and service categories.
Prices in Euros Basic price (listing of up to 3 categories) *
320,–
Company logo next to your address *
98,−
Additional categories *
96,−
Questions regarding your listings? Please contact Mrs. Britta Kraft Phone +49 75 81/48 01 - 18 Fax +49 75 81/48 01 - 10 email:
[email protected]
Please download the order form (2 pages) from our website (http://www.leuze-verlag.de/fachzeitschriften/ plus/plus-firmenverzeichnis), print the pages, fill in your company data and cross the categories you want to be listed. Don't forget to sign and please send us the form by mail (Eugen G. Leuze Verlag KG, Karlstr. 4, 88348 Bad Saulgau, Germany) or by fax (+49 75 81/48 01 - 10).
* This order is placed for 1 year and continues until terminated. Cancellation is possible in writing only 6 weeks before the end of the year. Belatedly received redundancies will only be valid for the subsequent year. We will charge You for Your entries at the beginning of the year. Deadline for corrections and changes is the 15th of the month before publishing date. All prices are without value added tax. 7
www.leuze-verlag.de
Online Advertising www.leuze-verlag.de – the portal for surface technology The website offers informations to the high-quality journals PLUS and Galvanotechnik. Specialists use it as a source of information e.g. for news, special content, events, jobs and classified ads etc. The portal gives an overview about the market of electroplating and surface technology as well as the market of assembly and packaging technology and the design of PCB. The online shop with a wide range of books for specialists also offers a great variety of informations on the portal. Target group: Specialists and desicion makers in the corresponding industries
Hits 8/2016 acc. to Google Analytics
Hits 8/2016 acc. to 1&1 Web-Analytics
page impressions: visitors:
page impressions: visitors:
22.181 4.131
136.287 20.322
Formats and prices:
Format Fullsize-Banner Superbanner Skyscraper Wide Skycraper Content Ad Rectangle Vertical Rectangle
Pixel (B x H) 468 x 60 700 x 90 120 x 600 160 x 600 468 x 60 180 x 150 240 x 400
Price/Month € 790,– € 890,– € 890,– € 990,– € 790,– € 450,– € 990,–
Further formats on request, Size: max 45 kB
Discount: 3 Banner 3 % 9 Banner 10 %
6 Banner 5 % 12 Banner 15 %
For any questions, please contact the advertising manager! 8
www.leuze-verlag.de
Readership Analysis Readers by branch Design
Adverts in the journal serve as 9%
General information
69 %
PCB manufacturer
20 %
Basic for online research
26 %
Suppliers consumables
16 %
Specific information about a product
21 %
Suppliers equipment
27 %
Making contact
15 %
Mounting
19 %
Collecting addresses
7%
Packaging
4%
Others
5%
Consultancy
5%
multiple choice possible
Readers by size of company
PLUS will be archived
1 to 20
42 %
Yes, each issue
80 %
21 to 50
17 %
Special issues / articles
13 %
51 to 100
21 %
Issues will be trown away
above 100
20 %
Preferred reading of regular features Design
7%
Visiting Leuze website 10 %
Never, because don't know the site or because of other reasons
16 %
34 %
One / more times each week
20 %
23 %
About one time each month
43 %
Packaging
10 %
Rarer
21 %
R&D
17 %
Components PCB Technology Assembly
6%
Section Analytik & Test not regarded
Average reading time till 30 minutes
41 %
till 1 hour
34 %
till 2 hours
22 %
more than 2 hours
9
3%
www.leuze-verlag.de
Schedule and Editorial Calendar January
February
March
April
May
June
Editorial & advertising deadlines
7.12.2016 9.12.2016
16.1.2017 20.1.2017
15.2.2017 20.2.2017
15.3.2017 22.3.2017
13.4.2017 18.4.2017
15.5.2017 19.5.2017
Publication date
16.1.2017
15.2.2017
15.3.2017
13.4.2017
11.5.2017
12.6.2017
Special topics
News / Highlights of electronica '16
Preview embedded world
Preview EMV
Preview PCIM and SMT/Hybrid/Packaging
Connector systems
Storage media
Capacitors
Power electronics components
Sensors & technology
Push buttons
ECAD software
Embedded design strategies
3D concepts
Chip design
Routing strategies
Thermal simulation
Flex and 3D-components
Embedding
Mechatronic integrated devices (MID)
High-current PCBs
Functional integration in PCBs
Galvanic production methods
Cleaning materials
Dispensing systems
Die- and wire bonding
Stencil production
Component placement
3D printing
Analytics & Test
Flying-probe systems
Materials characterization
Circuit analysis/ Oscilloscopes and other systems
CT & X-ray systems
Microscopes
Chip testing
Research & Technology
3D structures in electronics
Organic electronics
Electronics for medical systems
Power electronics
Destruction-free testing
Photovoltaics and storage media
SMT/Hybrid/Packaging Highlights of SMT Trade fair issue and PCIM; Rapid.Tech Preview Sensor+Test
Components Werner Schulz
[email protected] Design
Special editorial features
Hartmut Poschmann
[email protected]
10
PCB Technology Viola Krautz
[email protected] Wolfgang Reise
[email protected] Assembly, Packaging, Systems Gustl Keller gustl.keller@ leuze-verlag.de
www.leuze-verlag.de
Schedule and Editorial Calendar July
August
September
October
November
December
Editorial & advertising deadlines
14.6.2017 22.6.2017
17.7.2017 21.7.2017
15.8.2017 21.8.2017
15.9.2017 22.9.2017
9.10.2017 16.10.2017
15.11.2017 20.11.2017
Publication date
13.7.2017
15.8.2017
14.9.2017
16.10.2017
9.11.2017
14.12.2017
Special topics
News / Highlights of Sensor+Test; Intersolar
Preview IFA Consumer Electronics
News / Highlights of IFA
Preview productronica
productronica Trade fair issue
News / Highlights of productronica
MOSFETs
SoCs
Converters
ASICs
MCUs
Displays
Circuit design
IoT design strategies
Wireless and consumer electronics
Design tools
System design
Design guidelines
Ceramic substrates
Fine structuring / LDI systems
Thin-film technologies
Mechanical processing
Multi-layer systems
Novel base materials
Gustl Keller gustl.keller@ leuze-verlag.de
Rework and repair
Hand-solder devices soldering stations solder materials
Protective coating and molding
Packaging systems
Reflow solder systems
Manufacturing systems
Analytics & Test
Mechanical testing
Functional analysis
PXI testers
Bond test and analysis
AOI systems
PCB test strategies
Research & Technology
Safety aspects in electronics
Coating and cleaning of boards
Analytics of electronic materials
Smart electronics
Connectors
Thermal management
Components Werner Schulz
[email protected] Design Hartmut Poschmann
[email protected]
Special editorial features
PCB Technology
11
Viola Krautz
[email protected] Wolfgang Reise
[email protected] Assembly, Packaging, Systems
www.leuze-verlag.de
Terms of Business 1.
Acceptance of advertisements in a given issue or at a specific place in any issue cannot be guaranteed.
2.
Advertisers or their agents are responsible for timely submission of advertising text, artwork and associated materials prior to published issue closing date. The publishers cannot be held responsible for errors or omissions arising from late submissions.
9.
The publisher reserves the right to request pre-payment for additional advertising, during a period when multiple insertions have been agreed or outstanding invoices have to be settled.
10. The publishers reserves the right to decline publication of submitted advertising material and are not obliged to state reasons for so doing.
3.
The publishers will not be held responsible for advertising content or alterations to such content, where these are transmitted orally and not in writing.
4.
In the case of advertisements containing errors, advertisers are entitled to a rebate or replacement insertion, only in such cases where the error significantly alters the meaning or detracts from the content of the advertisement or its purpose.
11. In the case of Box Number advertising, the publisher undertakes to remit responses in a timely and responsible manner and assumes no liability. Remittance of such responses to the advertiser, including Express Mail, will be carried out using normal postal services. The publisher will not be held responsible for any claims arising out of such forwarded material or correspondence. The advertiser is responsible for returning to the sender, enclosed material such as testimonials, certificates etc. The publisher retains the right to open incoming responses to Box advertising in order to monitor any misuse of the system.
5.
Discounts set out in the advertising rate card will be applicable only in the 12 month period following the first insertion.
12. The publisher is allowed to copy and distribute ads online on the website and offline (e.g. on CD-Rom, DVD, presentations, reprints).
6.
Supplementary charges for advertising are calculated on the basic rate and do not qualify for discounts.
7.
Where an advertisement fails to appear, owing to circumstances outside the control of the publishers, the advertiser is entitled to subsequently charge the discount in proportion to the difference between the discount granted and that corresponding to the quantity actually purchased.
13. Account settlement within 30 days of invoice date is required. Settlement within 14 days attracts a 2% discount. Invoices are issued only after an advertisement has appeared. Charges do not include a complimentary copy of the journal.
8.
Paper proof copies of advertisements are provided only where these have been explicitly requested. Failure by advertisers to provide corrections (in print or electronic format) by the issue closing date, absolves the publishers of any duty to make such corrections.
14. Any queries or complaints must be raised within 14 days of the publication of the advertisement and/or receipt of invoice. 15. Any disputes going to law will be resolved within the judiciary of Bad Saulgau and Hamburg.
Bank account Landesbank Kreissparkasse, IBAN: DE93 6535 1050 0000 2921 00 BIC: SOLA DE S1 SIG Trade ID DE 146610668
www.leuze-verlag.de