c h r o m a t o g r a p h y

Thermo Scientific 3000 Series II Liquid Sampling Systems

The Affordable Masterpiece in Usability Precise and accurate sample introduction Unmatched ease of use Performance and simplicity in liquid sampling Ideal partner for productivity

Part of Thermo Fisher Scientific

3000 Series II Liquid Sampling Systems The Affordable Masterpiece in Usability

3000 Series II Liquid Sampling Systems The Affordable Masterpiece in Usability The Thermo Scientific 3000 Series II of liquid sampling systems for gas chromatography represent the next evolution in GC liquid sampling automation. The 3000 Series II incorporates advanced micro-step motor technology, ensuring excellent precision and fine control of the sampling turret movements. This version complies with the latest restrictions on hazardous substances in electrical and electronic equipment.

GC & GC/MS Liquid Sampling Automation Engineered to meet the highest level requirements of ruggedness and ease of use, and available in two configurations, the 3000 Series II is the solution for both high throughput and QA/QC control on the whole Thermo Scientific GC and GC/MS product portfolio.

AI 3000 II Autoinjector The Plug & Inject, 8-position single module sampling system is the right answer for automated analyses of small batches of samples, combining the utmost precision of the automatic sampling with the ease of use of the plug & play concept.

AS 3000 II Autosampler With a 105-position sample tray and integrated control sampling system, this is the fit for high sample throughput laboratories, designed for optimal standard performance and excellent ease of use.

AS 3000 II Gemini Configuration The new Gemini configuration allows for the installation of two autosamplers onto a single Thermo Scientific TRACE GC Ultra™. Perform simultaneous injections of samples onto two different injection ports and analysis by two detector channels on the TRACE GC Ultra.

Executive Business Card

Performance/ Simplicity = 1 The new concept in sample automation making high performance a reality even without any technical expertise.

“Split-second” installation Just a fraction of a second away from your results.

“Self-control” The fully independent injection tower makes the AI/AS 3000 completely self controlled. An extremely compact system with no requirement for additional benchspace.

“Tool Free” upgradability The real answer to your investment, follows the evolution of your laboratory workload, starting from AI and turning to AS; no tools required.

Rugged in design The revolving turret minimizes the thermal stress on the syringe and eliminates any complicated vial transfer.

Top Performing High precision grants top class results even for the most demanding applications.

3000 Series II Liquid Sampling Systems The Affordable Masterpiece in Usability

Maintaining the P/S= 1 concept (Performance/Simplicity) The 3000 Series II continues the P/S=1 paradigm: Achieving simplicity does not mean losing performance and productivity as a tradeoff. The AI/AS 3000 Series II automatic sampling systems do not require any specific expertise from the chemist, leaving more time for business. Simplicity is now directly proportional to top performance, making the 3000 Series II a masterpiece in usability.

Optimized parameter set-up “Hot Empty Needle” or “Cold Needle” injection techniques can be programmed just by choosing the proper option in the set-up menu. Each selection incorporates optimized values for the critical parameters enabling a correct execution of the analysis. Needle penetration, dwell time, and injection speed are pre-set for unprecedented repeatability and ultimate simplicity.

Full range, high precision volume selection The injection volume is selectable in steps from 0.01 to 0.1 µL over the syringe’s total capacity, allowing full control and great flexibility. Accepting 10 or 5 µL syringes, the AI/AS 3000 sampling systems are also able to operate in the nanovolume range. Utmost precision is standard even when performing Fast GC.

Combined solvent rinsing A series of 4 different solvent bottles can be used for appropriate syringe flushing. Single or combined solvent selection for Pre and Post cleaning allow thorough rinsing of even the most tenacious compounds, ensuring zero crosscontamination. In addition a 40 mL waste bottle ensures long unattended operation.

Fast and easy syringe replacement Two syringe types can be installed in the turret with no additional calibration. Syringe replacement is performed by simply removing the old and snapping in the new one. Autocentering of the turret over the sample vial, the solvent bottle and the injector is then automatically performed, without any need for manual intervention. Just load your samples and run the analysis with no extra down time.

Removable trays Both trays (8 and 105 position) can be removed for sample loading or preparation, or to be stored elsewhere, if required. In addition, multiple 8 position trays can be used as sample holders marked accordingly to uniquely identify different batches of samples: just another useful feature for productive labs.

Safe accessibility In compliance with all safety standards, a series of switches allow the systems to be turned off automatically each time the turret is removed from the GC’s mounting bracket. Turret maneuvring is therefore freely accessible at no risk.

3000 Series II Liquid Sampling Systems The Affordable Masterpiece in Usability

“Split- second” Installation The new 3000 Series II is conceived and engineered for an “out-of-the-box” type installation. Fixed mechanical guides enable unequivocal slide-in installation, ensuring precise alignment with the injector and making system set-up as easy as ever.

“Tool Free” upgradability Choose your investment and make the best out of it. Following the growing business of your lab, the AI 3000 Autoinjector can easily be turned into the AS 3000 Autosampler with no tool required. Expansion from the 8 position sample tray to a 105 sample capacity system is accomplished easily by adding the rotating carousel with integrated electronics. Both AI/AS 3000 II can be installed either on the right or on the left hand side of the GC just by swapping the sample container or sample tray’s side; the automatic recognition of the position will do the rest.

Rugged in design The revolving turret allows the syringe to swing from the sample tray to the injection port. Besides avoiding any complicated sample vial transfer procedure, this approach keeps the autosampler and samples away from any heated source. This prevents the syringe from being adversely affected by the injector’s temperature and leaves the inlet unobstructed, available for manual priority sampling or maintenance.

Self control State of the art, miniaturized electronics yield full integration of all parts required for control, with no need for an external or GC on-board control module. This completely independent, compact sampling system can be placed on any Thermo Scientific GC or GC/MS in the lab. Plus, these electronic components are compliant with current RoHS restrictions.

Top Performing

PEAK AREA (COUNTS)

Results obtained in standard conditions show typical RSD % for hydrocarbons matching your best expectations, both in split and splitless! The evidence: RUN

C12

C18

C24

C28

C40

1 2 3 4 5 6 7 8 9 10 Average RSD (%)

284 301 284 505 282 955 281 628 284 878 281 627 283 907 282 856 281 992 284 233 283 288 0.44

356 509 357 309 355 428 354 040 356 470 354 884 356 274 354 939 354 014 357 042 355 691 0.34

502 342 503 253 500 850 499 937 502 143 500 254 501 871 499 762 499 581 502 511 501 250 0.26

309 142 309 734 308 296 306 629 308 056 307 088 308 529 306 013 307 030 308 158 307 867 0.38

203 382 202 722 203 438 202 988 202 908 201 465 201 089 202 449 204 318 201 990 202 675 0.48

Analysis of Standard mixture (1 µL) Split injection with Hot Empty Needle technique (Standard)

Laboratory Solutions Backed by Worldwide Service and Support Tap our expertise throughout the life of your instrument. Thermo Scientific Services extends its support throughout our worldwide network of highly trained and certified

In addition to these offices, Thermo Fisher Scientific maintains a network of representative organizations throughout the world.

engineers who are experts in laboratory technologies and applications. Put our team of experts to work for you in a range of disciplines – from system installation, training and technical support, to complete asset management and regulatory compliance

Africa +43 1 333 5034 127 • [email protected]

consulting. Improve your productivity and lower the cost of instrument ownership

Australia +61 2 8844 9500 • [email protected]

through our product support services. Maximize uptime while eliminating the

Austria +43 1 333 50340 • [email protected]

uncontrollable cost of unplanned maintenance and repairs. When it’s time to enhance your system, we also offer certified parts and a range of accessories and

Belgium +32 2 482 30 30 • [email protected]

consumables suited to your application.

Canada +1 800 530 8447 • [email protected]

To learn more about our products and comprehensive service offerings,

China +86 10 8419 3588 • [email protected]

visit us at www.thermo.com.

Denmark +45 70 23 62 60 • [email protected] Europe -Other +43 1 333 5034 127 • [email protected] France +33 1 60 92 48 00 • [email protected] Germany +49 6103 408 1014 • [email protected] India +91 22 6742 9434 • [email protected] Italy +39 02 950 591 • [email protected] Japan +81 45 453 9100 • [email protected] Latin America +1 608 276 5659 • [email protected] Middle East +43 1 333 5034 127 • [email protected] Netherlands +31 76 579 55 55 • [email protected] South Africa +27 11 570 1840 • [email protected] Spain +34 914 845 965 • [email protected] Sweden / Norway / Finland +46 8 556 468 00 • [email protected] Switzerland +41 61 48784 00 • [email protected] UK +44 1442 233555 • [email protected] USA +1 800 532 4752 • [email protected]

www.thermo.com

Thermo Electron S.p.A, Milan, Italy is ISO Certified. ©2008 Thermo Fisher Scientific Inc. All rights reserved. Microseal is a trademark of the Merlin Instrument Company. All other trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries. Specifications, terms and pricing are subject to change. Not all products are available in all countries. Please consult your local sales representative for details. BR10028_E 06/08C