TASMANIA TRAINING COURSES COURSE
DURATION
FEE INC GST
TRAINEES
COURSE OUTLINE
Min 6 – Max 10
This course requires the operator to plan the work, conduct routine checks, set up & operate elevating work platforms as well as shut down and secure it. It is based on the requirements of the national Standard for Licensing Persons Performing High Risk Work and in its current form meets state and territory licensing requirements. Course covers: Compliance with OHS licensing legislation Emergency procedures and safety equipment, including use of safety harnesses, energy absorbers, lanyard and anchor points Assessment of ground conditions to confirm that the site is suitable Risk assessment and hazard control strategies including hierarchy of control as applied to the positioning and safe operation of the elevating work platform (particular awareness of the risks associated with overhead power lines/electrical cables, ground conditions, wind, pedestrians and tipping) Appropriate procedures for estimation of loads, to ensure that the elevating work platform is not overloaded Positioning and operation of the elevating work platform to ensure that the safest lift is performed
TRAINING VENUE
SCHEDULED
SCHEDULED COURSES
Licence to operate a boom type platform 11m or more
Licence to operate a forklift truck
coateshire training
WP Only Metro - $510 Regional - $767
2 days WP+EWPYC Metro - $570 Regional - $833
2 days
Metro - $520 Regional - $767
Min 6 – Max 10
This course is based on the National Standard for Licensing of persons performing High Risk Work and meets state and territory licensing requirements. It requires the operator to be able to plan the work, conduct routine checks on the forklift, shift loads in a safe manner and shut down and secure the equipment after the completion of operations. Content includes: Compliance with OH&S licensing legislation Communicate and work safely with others in the work area Identify hazards associated with the operation of the forklift truck and put in place effective hazard controls for those hazards identified Conduct pre-start-up, operational, moving loads and shut down and secure checks of the forklift truck according to procedures Operate the forklift truck and move loads safely, including driving and manoeuvring, picking up and placing of loads at various stack heights Drive forklift truck with load in forward and reverse, maintaining visibility
1300 657 867 or
[email protected]
Cambridge & Launceston
Monthly (alternating between branches)
OR Burnie
On Request
Cambridge & Launceston
Monthly (alternating between branches)
OR Burnie
On Request
Page 1 of 7
TASMANIA TRAINING COURSES Courses held as required &/or customer courses Confined Space Awareness
½ day
Metro - $242 Regional - $459
Min 6 – Max 15
Safe Operation of Chainsaws
1 day
Metro - $286 Regional - $575
Min 6 – Max 12
Safe operation of Demolition Saw
1 day
Metro - $286 Regional - $575
Min 6 – Max 12
Safe use of laser levels
1 day (6 hours)
Metro - $203.50 Regional - $491
Min 10 – Max 20
Mobile Scaffold Awareness (up to 4m)
1 day
Metro - $308 Regional - $600
Min 6 – Max 10
coateshire training
Identify a confined space Overview of Legislation and Standard Overview of hazard identification Overview of risk assessment Knowledge of entry permit requirements Identify site safety requirements Identify chainsaws and their operation Starting and stopping Tension/compression cuts Chain sharpening / tensioning Refuelling safely Clean up and storage Statutory requirements for operating a Demo Saw Site and job planning Pre-operational checks of machines Parts and terminology Safe start-up/operation / shut down Storage and handling procedures Basic principles of laser operations Safety requirements Applications in the civil and construction industry Safety rules and precautions Accident reporting Record keeping At the end of the course, the participant will have been taught: OHS requirements Components of mobile scaffold Site and job planning activities Pre-operational and post-operational check activities Identify, report and record faults Erection and dismantling of mobile scaffold tower Course sessions based on Australian Standard 1576 and various Codes of Practice
1300 657 867 or
[email protected]
Cambridge, Launceston or Burnie
As Required
TBA
As Required
TBA
As Required
TBA
As Required
TBA
As Required
Page 2 of 7
TASMANIA TRAINING COURSES Safe operation of compaction roller
1 day
Metro - $330 Regional - $600
Min 6 – Max 12
Safe use of small plant and equipment
1 day
Metro - $308 Regional - $575
Min 6 – Max 12
Telehandler (Gold Card)
½ day
Metro - $390 Regional - $523
Min 6 – Max 8
½ day
Metro - $242 Regional - $459
Min 8 – Max 15
Trenching and Shoring Awareness
coateshire training
This course introduces the participants to the basic theory of: Soil compaction Different types of ‘ride on’ compaction rollers Hazards related to operating rollers Pre operational checks Basic principles of operation Shut down Security Duty of care – OHS Planning and preparation of work Selection of equipment and attachments Operational checks Safe and effective operational techniques Communication methods – OHS Shut down and clean up Types of equipment available: Jackhammer – air/electric Grinder Air compressor and attachments Rammers and plate compactors Water blasters Submersible pumps – petrol/electric Conduct routine checks Plan work Check controls and equipment operation Shift loads Shut down equipment Secure site The course is designed to give participants an understanding of trenching and ground support in the work environment and is delivered within the classroom. Course includes:
Follow safe work practices Hazard identification Risk management Follow emergency procedures Plan and prepare Install and remove trench shoring Clean up
1300 657 867 or
[email protected]
TBA
As Required
TBA
As Required
TBA
As Required
Cambridge, Launceston or Burnie
As Required
Page 3 of 7
TASMANIA TRAINING COURSES
Install Trench Support
2 days
Metro - $450 Regional - $748
Min 6 – Max 12
This course covers the installation of trench support in the civil construction industry and is based on the units of competency from the Resources and Infrastructure Industry Training Package. Content includes: Apply legislation, organisation and site requirements and procedures for installing trench shoring Organise work activities Select and use relevant tools and equipment safely Identify and report on hazards related to the worksite and work activity Communicate effectively to receive and clarify work instructions Site and equipment safety requirements Excavation techniques Shoring methods and systems Working in confined spaces Construction techniques Equipment types, characteristics, technical capabilities and limitations Operational, maintenance and basic diagnostic procedures Site Isolation and traffic control responsibilities and authorities Materials safety data sheets and materials handling methods Project quality requirements Civil construction terminology JSAs/safe work method statement
Install Trench Support – Reassessment
1 day
Metro - $280 Regional - $523
Min 6 – Max 12
Reassessment of the content for Install Trench Support
Min 6 – Max 10
This course covers the workers/drivers who load, transport and unload plant and equipment. It is a requirement by law that anyone moving a high risk piece of plant needs a high risk work licence for that plant as well as a Statement of Attainment for Load & Unload Plant. Statement of Attainment based on RIIHAN308A. Content includes: Understanding compliance documentation Preparing to load Care of materials/tools/equipment Recognising tie points Size and Weight of loads Positioning loads Restraint techniques Unloading Safety Personal Safety Environmental aspects
Load & Unload Plant
coateshire training
1 day
Metro - $320 Regional - $523
1300 657 867 or
[email protected]
TBA
As Required
TBA
As Required
Cambridge or Launceston
As Required
Page 4 of 7
TASMANIA TRAINING COURSES Working near underground assets
1 day
Metro - $275 Regional - $575
Min 8 – Max 15
Height Safety Equipment Inspection
½ day
Metro - $258.50 Regional - $575
Min 6 – Max 12
Working Safely At Heights
1 day
Metro - $260 Regional - $523
Min 6 – Max 12
coateshire training
Attendees will take away basic knowledge and skills from this course relating to: Hazard identification and risk management Legislation and regulations Application for plans through “Dial Before You Dig” Types of services found underground Reading and interpretation of service plans Best practice when working around overhead and underground services Location methods Attendees will take away basic knowledge and skills from this course relating to: Legislation and requirements Carrying out an inspection of a full bodied harness Conducting an inspection of a shock absorbing lanyard Determining if a harness should be removed from service Assessing if a lanyard should be removed from services Completing records for compliance to the relevant standard Personal protective equipment (PPE) Clear work area and tidy up This course covers the competency required to undertake safe working practices when working at heights or depths. Statement of Attainment based on RIIOHS204A. Content includes: Legislation and requirements Environmental protection Duty of Care Safe work practices Safe work method statements Task assessment Site information Hazards and risk management Operational plan Personal protective equipment (PPE) Tools and equipment Emergencies and reporting incidents Dismantle safety system Clear work area and tidy up Check and store equipment
1300 657 867 or
[email protected]
TBA
As Required
Cambridge, Launceston or Burnie
As Required
TBA
As Required
Page 5 of 7
TASMANIA TRAINING COURSES
Identify, Locate & Protect Underground Assets
2 days
Metro - $680 Regional - $847
Min 6 – Max 12
Confined Space Entry
2 days
Metro - $450 Regional - $748
Min 6 – Max 12
Confined Space Entry – Reassessment
1 day
Metro - $280 Regional - $523
Min 6 – Max 12
coateshire training
This course covers the competency required to undertake safe working practices when identifying, locating and protecting underground assets. Statement of Attainment based on RIICCM202A. Content includes: Legislation and requirements Consequences of contact with live services Plan and prepare for the intended work Communication – onsite / utility owners / supervisors The role of safety observes Hierarchy of location methods Application for plans through “Dial Before You Dig” Reading and interpretation of service plans Interpreting local conditions Underground and above ground markers Positive location methods Problematic situations Reporting damage Re-instating work areas This course covers OHS policies and procedures, entering and working in confined spaces and local risk management in resources and infrastructure industries. Statement of Attainment based on RIIOHS202A & RIIRIS201B. Course Content: Access and apply safety procedures Apply personal safety measures Apply operational safety measures Apply operational safety measures Maintain personal wellbeing for job Identify and report incidents Plan and prepare for entering and working in confined spaces Enter and work in the confined space Exit confined space Clean up Identify hazards Assess risk and identify unacceptable risk Identify, assess and implement risk treatments Complete records and reports Reassessment of the content for Confined Space Entry
1300 657 867 or
[email protected]
TBA
As Required
TBA
As Required
TBA
As Required
Page 6 of 7
TASMANIA TRAINING COURSES 2 machines Metro - $300 Regional - $627
EWP Yellow Card