CONTINENTAL METAL PRODUCTS Stainless Steel Healthcare Equipment Meeting the Demands of the OR

healthcare division

Stainless Steel Storage Cabinets

Proudly Made in the USA for over 65 years

CMP has been manufacturing Stainless Steel Storage Cabinets for over 65 years. Our Storage Cabinets are fabricated to the highest standards and offer an array of storage solutions. CMP Storage Cabinets can be found in almost every hospital in the U.S. and can be configured for your unique requirements. CMP is so confident in our quality and craftsmanship that we offer a two year labor and six year parts warranty.

Features: • Stainless Steel Construction • Heavy Duty Door Hardware • Optional Door Locks • Pegboard • Sliding Glass Doors • Optional Storage Baskets • Custom Sizes Available

• Glass Doors with ¼” Thick Safety Glass • Stainless Steel Double Pan Solid Doors • Desk Cabinets with Drawers • Computer Charting Workstations • Nurse Documentation Stations • Recessed or Freestanding Installation • Storage Solutions Available

• Many Sizes Available • Warming Cabinets • Adjustable Shelves • Pass-Through Feature • Catheter Slides • Media Cabinet • Optional Casters

Continental Metal Products Co., Inc. – 35 Olympia Avenue, Woburn, MA 01801 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com [email protected]

CONTINENTAL METAL PRODUCTS Stainless Steel Healthcare Equipment Meeting the Demands of the OR

healthcare division

Stainless Steel Storage Cabinets

Proudly Made in the USA for over 65 years

Models:

Surgical Table Accessory Cabinet (SC1 Series) • Stainless steel accessory cabinet with pegboard and hooks • Hinged stainless steel double pan doors • Available 24”, 36”, 42” or 48” wide x 60”, 72” or 80” high x 18”, 20” or 24” deep • Model Designation: SC1-WH-D where W=width, H=height, D=depth Example: SC1-4860-18 is a 48” wide x 60” high x 18” deep unit

General Storage Cabinet (SC2 Series) • Stainless steel storage cabinet with adjustable shelves • Hinged glass doors, hinged stainless steel double pan doors or sliding glass doors • Available 30”, 36”, 42” or 48” wide x 60”, 72” or 80” high x 18”, 20” or 24” deep • Model Designation: SC2-WH-D where W=width, H=height, D=depth Example: SC2-4860-18 is a 48” wide x 60” high x 18” deep unit

Desk Cabinet (SC3 Series) • Stainless steel desk cabinet with writing surface and drawers • Available 24” or 36” wide x 60” or 72” high x 18” or 24” deep • Model Designation: SC3-WH-D where W=width, H=height, D=depth Example: SC3-2460-18 is a 24” wide x 60” high x 18” deep unit

Custom Sizes Available Continental Metal Products Co., Inc. – 35 Olympia Avenue, Woburn, MA 01801 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com [email protected]

CONTINENTAL METAL PRODUCTS Stainless Steel Healthcare Equipment Meeting the Demands of the OR

healthcare division

Stainless Steel Storage Cabinets

Proudly Made in the USA for over 65 years

Models:

Miscellaneous Supply Cabinet (SC4 Series) • Stainless steel storage cabinet with adjustable shelves • Hinged glass door or hinged stainless steel double pan door • Available 24” or 30” wide x 60”, 72” or 80” high x 18”, 20” or 24” deep • Model Designation: SC4-WH-D where W=width, H=height, D=depth Example: SC4-2460-18 is a 24” wide x 60” high x 18” deep unit • Also available as Media Cabinet with louvered front door, rack rails for electronic equipment, electrical outlets and wire routing holes

Warming Cabinet (DSC5 or DSW2AE Series) • Stainless steel warming cabinet with two compartments • Stainless steel doors or Thermopane glass doors • DSC5 available 24” or 30” wide x 60” high x 18” or 24” deep • DSW2AE available 30” wide x 72” high x 21” or 27” deep (outside dimensions) • Model Designation: DSC5-W60-C-D where W=width, D=depth Model Designation: DSW2AE-C-D where C=# of heated compartments and D=inside depth (18” or 24”)

Computer Charting Workstation (SC6 Series) • Stainless steel cabinet with counter, two drawers and storage cabinet for using and storing computer equipment • Electrical outlets and wire routing holes per customer requirements • Available 36” or 48” wide x 60” high x 18” deep • Model Designation: SC6-W60-18 where W=width Example: SC6-3660-18 is a 36” wide x 60” high x 18” deep unit • Note: CMP also manufactures a full line of Nurse Documentation Stations that offer over 150 different configurations for all of your computing and documentation needs. Custom Sizes Available Continental Metal Products Co., Inc. – 35 Olympia Avenue, Woburn, MA 01801 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com [email protected]

CONTINENTAL METAL PRODUCTS Stainless Steel Healthcare Equipment Meeting the Demands of the OR

healthcare division

Stainless Steel Storage Cabinets

Proudly Made in the USA for over 65 years

Specifications: Continental Metal Products Stainless Steel Storage Cabinets are constructed of 18 gauge, type 304 stainless steel with a No. 4 finish. All exposed welds to be done by Heliarc process and ground and polished to match No. 4 finish. Storage cabinets can be selected and arranged in many different ways to accommodate the storage and operational needs of any institution. The cabinets have a self-trimming perimeter flange that allows for an easy and clean installation into recessed openings. The cabinets are also available with finished ends and tops for freestanding installations. The cabinets can be mounted on a contractor built base or supplied with a stainless steel pedestal base. Glass doors contain ¼” thick safety plate glass. Entire front portion of door is punched and formed from one piece of 18 gauge stainless steel. Stainless steel double pan doors and sliding glass doors are also available. Doors are mounted on heavy duty chrome plated hinges and are secured closed using nylon friction roller catches. Two point knob lock doors are also available. Cabinets with shelves use pilaster strips that allow for height adjustment increments of ½”. The pilaster strips are easily removed to allow for proper sterilization of the cabinet and pilaster strip. Drawers are mounted on ball bearing slides and contain pullout stop and roll-out prevention. Handles for doors and drawers are chrome plated. Cabinets are also available with doors on both sides as a pass-through feature to enable loading of cabinet from corridor side. For Warming Cabinets, the heating chamber shall be insulated with 1 ½” thick fiberglass insulation. DSC5 models contain two adjustable wire shelves and DSW2AE models contain three adjustable wire shelves. Compartment shall have an insulated double-wall door with semi-concealed pivot hinges with magnetic catch and heat resistant gasket. ¾” thick clear Thermopane glass doors are available as an option. Warming Cabinet shall be capable of heating contents within 2 to 6 hours depending on load. Chamber heating system is electric and utilizes strip heaters that are mounted on the rear wall concealed behind a removable perforated guard. When specified, door shall also be available for the other side of unit as a “pass-through” feature, enabling loading of the Warming Cabinet from either side of unit. The Warming Cabinet contains a microprocessor control system with a digital display. Components shall include thermostatic temperature control, lighted rocker arm power switch, 15 amp circuit breaker protection, heat indicating lamp, continuous air circulating fan, Fahrenheit/Celsius conversion button, 180 degree hi-limit cut-off thermostat for over-temperature protection with red warning lamp and audible alarm buzzer. All operating controls and indicators shall be functional and visible from the exterior of cabinet. Cabinets and Nurse Documentation Stations can be configured to the user’s specific requirements. Electrical outlets and wire routing holes can be located as required. Contact CMP for more information. Service Requirements for Warming Cabinets: (One Compartment Heat) - 120V, 60HZ, 1PH, 7 Amps (Two Compartment Heat) - 120V, 60HZ, 1PH, 12.5 Amps Units are also available for 220/240V, 50/60HZ

Continental Metal Products Co., Inc. – 35 Olympia Avenue, Woburn, MA 01801 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com [email protected]

CONTINENTAL METAL PRODUCTS Stainless Steel Healthcare Equipment Meeting the Demands of the OR

healthcare division

Stainless Steel Storage Cabinets

Proudly Made in the USA for over 65 years

Options: • Surgical Table Accessory Cabinet (SC1 Series) • Desk Cabinet (SC3 Series)

• Computer Charting Workstation (SC6 Series) • Media Cabinet (SC4 Series) • Sliding Glass Doors

• General Storage Cabinet (SC2 Series) • Miscellaneous Supply Cabinet (SC4 Series) • Warming Cabinet (DSW2AE Series) • Nurse Documentation Station (Call CMP for details) • Hinged Glass Doors • S/S Double Pan Doors

• Casters for Mobility

• Two Point Knob Locks

• Recessed Installation • Left or Right Side Door Hinging

• Free Standing Installation • Locking Doors

• Pass-Through Feature

• Locking Drawers

• Gaskets for Pass-Through Cabinet • Thermopane Glass Doors for Warming Cabinets • Stainless Steel Slope Top • S/S Finished End Panels

• Electronic Interlock System for Pass-Through Cabinet • Seismic Anchoring

• Storage Solutions (see storage solutions on following page)

• Catheter Slides

• 220/240V, 50/60HZ • Custom Sizes Available

• Stainless Steel Pegboard • Lead Lined Unit for X-Ray Protection

• Warming Cabinet (DSC5 Series)

• S/S Pedestal Base • Stainless Steel Trim Strips

Continental Metal Products Co., Inc. – 35 Olympia Avenue, Woburn, MA 01801 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com [email protected]

CONTINENTAL METAL PRODUCTS Stainless Steel Healthcare Equipment Meeting the Demands of the OR

healthcare division

Stainless Steel Storage Cabinets

Proudly Made in the USA for over 65 years

Optional Storage Solutions: • 10cm Basket: B-4060-10 Short Divider: D-40-10 Long Divider: D-60-10

• 20cm Basket: B-4060-20 Short Divider: D-40-20 Long Divider: D-60-20

• 5cm Tray: T-4060-05 Short Divider: D-40-05 Long Divider: D-60-05

• 10cm Tray: T-4060-10 Short Divider: D-40-10 Long Divider: D-60-10

• Side Panel, Long

• Side Panel, Short

• 60x40cm Shelf

• Instrument Container Shelf

• Ball Bearing Slides (Pair) BBS-17 / BBS-25

• Retractable Catheter Holder CATH-6 (6 Hooks) CATH-9 (9 Hooks)

• Divider Holder

• Plastic Label Holder

• Divider Lock

• Basket Stop

Continental Metal Products Co., Inc. – 35 Olympia Avenue, Woburn, MA 01801 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com [email protected]