PROFESSOR SHAMSUDDIN BIN SULAIMAN. PhD Department of Mechanical and Manufacturing Engineering Faculty of Engineering Universiti Putra Malaysia (UPM) 43400 UPM Serdang, Selangor, MALAYSIA Specialisation: Manufacturing Engineering, Metal Composite Materials and Casting Technology Staff card Number: A01312 IC Number: 630104-01-6127 Tel: Fax: Mob:
603- 89466334 603- 86567122 6016-2276215
email:
[email protected] website:http://www.eng.upm.edu.my Scopus: https://www.scopus.com/authid/detail.url?authorId=12647225400 H-Index: 11
1. Educational Background 1989 – 1991
University of Wales, Swansea, United Kingdom PhD in Mechanical Engineering Thermal and Flow Analysis of Casting Process: Numerical Simulation and Experimental Works (Areas of interest: Casting Technology, Metal Forming, Composite Material and Automation)
1987 – 1988
Univeristy of Wales, Swansea, United Kingdom Master of Science (Design and Economic Manufacture)
1982-1986
Universiti Putra Malaysia Bachelor of Engineering (Agricultural)
2. Previous Academic and Other Relevant Appointments
Date
Appointment
Sept 2007-to date
Professor Dept. of Mechanical and Manufacturing Engineering, Faculty of Engineering Universiti Putra Malaysia
1July 2011- Jun 2014
Senate Member Universiti Putra Malaysia
April 2008-March 2011
Deputy Dean School of Graduate Studies Universiti Putra Malaysia
Page 1/62
Sept 2003-Aug 2006
Deputy Dean Faculty of Engineering Universiti Putra Malaysia
Feb. 2001 – Nov 2001
Deputy Director University Research Park/Taman Penyelidikan Universiti (TPU) Universiti Putra Malaysia
August 1998-August 2007
Associate Professor Dept. of Mechanical and Manufacturing Engineering Universiti Putra Malaysia
April’99-Oct’99
College Master/Pengetua Kolej Tun Perak Universiti Putra Malaysia Head Department of Mechanical Manufacturing Engineering Universiti Putra Malaysia
Jan 1995-August 1998
and
3. Teaching and Supervision a. Teaching Courses Code KMP 3001/EMM3701 KMP 3003/EMM3702 EMM 3008 KMP 3005 EMM 3807 KMP 3803 KMP3508 KS311 KS 353 KS 373 KMP 5001/EMM5701 EMM 5708 EMM5602 EMM 5616 KCEP 3302
Course Name Manufacturing Process I Manufacturing Process II Powder Metallurgy Tool Engineering Machine Tool Technology Automation II Robot Dynamic Fluid Mechanics 1 Material Engineering Fabrication and Production Advanced manufacturing Processes Automation and Robotics Total Quality Management Maintenance Management Tools Engineering (Mould and Die)
Institution UPM UPM UPM UPM UPM UPM UPM UPM UPM UPM UPM UPM UPM UPM UM
b. Supervision of Students
Level PhD MSc
Graduated / Completed Chairman/ Committee/ Supervisor Co-Supervisor 13 18 20 16
On-going Chairman/ Committee/ Supervisor Co-Supervisor 9 11 0 7
Page 2/62
MEng BEng
No.
77 74
-
PhD Completed (Supervisor) Name
9 3
Thesis Title
-
Year Graduated 2016
1.
Rosmamuhamadani bin Ramli (GS34430)
Characterization and mechanical properties of in-situ titanium diboride fibre reinforced aluminium copper alloy composites
2.
Jamshid Nemati GS28431
Mechanical properties of ultra-fine grain Aluminium Al6063 and pure copper processed by equal channel angular extrusion method
2015
3.
Hani Mizhir GS29903
Improvement of the Mechanical Properties of Aluminium Alloys and Composite Extruded parts
2015
4.
Nanang Fatchurohman GS26836
Manufacturing process and material selection using modified multi criteria decision making for brake disc
2014
5.
Azhar Abdullah GS19228
Mechanical properties of Tin Mine tailing sand for greensand casting mould
2013
6.
Taufik Saroni GS22022
Development of non-linear thermal expansion model for casted Aluminium Silicon Carbide
2012
7.
M.Sayuti GS20480
Properties of Titanium carbide reinforced aluminium silicon alloy matrix
2012
8.
Daryoush Safarzadeh GS18284
Design an development of a self-propelled hydraulic floor crane
2012
9.
Mohamed A.Abdulmawlla Jolgaf GS16483
Optimization of closed die forging process
2011
10.
Elfetori F. Abdewi GS13364
Design of composite tube subjected to quasi-static and dynamic impact loadings
2007
11.
Thoguluva Raghavan Vijayaram GS13402
Properties of Metal matrix Composite of Aluminium – 11.8% Silicon Reinforced with different particulates
2006
12.
Lim Ying Pio GS11777
Effects of grain refinement on the cooling rate, and microstructural and mechanical properties of Al-Si sand casting
2006
13.
Rosnah Mohd Yusof
Implementation of Advanced Manufacturing Technologies (AMTs) in the Small and Medium Scale Industries (SMIs) of Malaysia
2002
PhD Completed (Co-Supervisor) Page 3/62
No.
Name
Thesis Title
Year Graduated 2015
1.
Mohd Uzair bin Mohd Rosli (GS30204)
Development of value added engineering concept generation for automotive parts
2.
Shahla paslar (GS31529)
Development of hybrid dynamic scheduling model for flexible manufacturing system
2015
3.
Mohd Azaman Md Deros (GS32933)
Development of Thin wall natural Fibre Composite
2015
4.
Muhammad Yusuf (GS22333)
Cutting parameter optimization for aluminium LM6 composite using design of experiment method
2013
5.
Amer Najat Najmaldeen Kakahy (GS28436)
Design and development of an integrated slasher (Pulverzer) fro sweet potato harvester
2013
6.
Mohammad Reza Shahrak (iGS18304)
Industrial Engineering
2012
7.
Ali Hashemi (GS21422)
Agricultural Machine design
2012
8.
Mohammed Shu'aibu Abubakar (GS21830)
Machine Design
2012
9.
Mehrdad Nikbakht Eliaderany (GS21374)
Supply chain Management in Oil Industry
2012
10.
Fatai Bukola Akande (GS21068)
Motion resistance analyses of towed narrow wheels
2011
11.
M.Akhir (GS15631)
Development of Sweet potato harvester
2011
12.
Mohammadreza Vasili (GS18909)
Development of load shuffling and travel time model for miniload sutomated storage and retrieval system with open-rack structure temperature for turning operations.
2011
13.
Gholamreza Ismailian (GS17989)
Line Balancing of Production line.
2010
14.
Suditama (GS05827)
Analysis of Thermal Storage Material and Heat Transfer Characteristics
2008
15.
Fayiz Yousef Mahmoud Abu Khadra (GS12543)
Metamodelling Technique of metal forming process
2006
16.
C.K. Ooi (GS02448)
Improving Flexibility in Manufacturing using a Family Ordering System for long lead time components
2005
17.
Elnougomi Abd. Elgadir Omer
Design, Fabrication and Performance Test of a Peanut Harvesting Machine
2000
18.
Tang Sai Hong
Rapid Prototyping using a Precision Robotic Manipulator
2000
19.
Faizal Amri
The performance of a disk plow combined with a
1997 Page 4/62
rotary blade in wet soil
PhD Progress (Supervisor) No.
Name
Thesis Title
Expected Year to be Graduated 2016
1.
Subramaniasarma a/l Sreenivasan (GS31060)
BMC Kenaf Reinforced Polymer
2.
Ishak Mohmad Ali (GS32496)
Mechanical Properties of Propeller by vibration casting
2016
3.
Zolkarnain bin Marjom (GS41838)
Composite Casting Technology
2018
4.
Almukhtar. Ib. A. Aljermi. (GS42636)
Casting: Improvement of Al Cu Composite
2018
5.
Zatil Aqmar binti Zulkifli (GS40943)
Wettability in Casting Process
2018
6.
Ahmaad Kadmouse Aldeehani (GS43396)
Integrated maintenance management in Sport Facility
2019
7.
Abdullah M S M Aladwan (GS43398)
Integrated maintenance management in Halal Food
2019
8.
Hamid Nahidi (GS43646)
Metal Matrix Composite
2018
PhD Progress (Co-Supervisor) No. Name of Students and Title of Thesis/Project
Thesis Title
Year Expected to be Graduated
1.
Mohamed Serdah M (GS37298)
Variable Valve Timing Optimization by Using Electromagnetic Solenoid in the Engine
2016
2.
Teo Hiu Hong (GS31074)
Industrial Engineering
2017
3.
Jethesh Prabhakaran (GS31899)
Manufacturing System Engineering
2018
4.
Mehran Tamjidy (GS35754)
Industrial Managemnt system
2018
5.
Mageswaran a/l Arunasalam (GS36238)
Manufacturing Engineering
2018
6.
Khairul Nizam Md Tohit (GS35798)
Industrial Management System
2018
7.
Bala Gambo Jahun (GS37351)
Design and Fabrication of combined harvester
2017
Page 5/62
8.
Bt Iskandar Zulkarnain bin Baharudin (GS37694)
Manufacturing system Engineering
2018
9.
Mohd Shahrizan bin Yusoff (GS38448)
Lean Engineering in Automotive Industry
2017
10.
Qasim Mhalhal Azpen (GS39560)
Production system in Manufacturing Industry
2018
Master of Science Completed (Supervisor) No.
Name
Thesis Title
Year Graduated 2015
1.
Mona Kiaee (GS22043)
Development of Squeeze casting
2.
Hafizal Abu Bakar (GS12123)
Design and Fabrication of three component balance of wind tunnel
2012
3.
Suraya Sulaiman (GS22223)
Metal flow and solidification of casting process
2011
4.
Nanang Fatchurohman (GS19360)
Molten metal flow and solidification of casting process
2010
5.
Mostafa Badakshan (GS18160)
Optimization of simultaneous scheduling for machines and automated guided vehicles using fuzzy genetic algorithm
2009
6.
Ehsaanreza Bagherian (GS 19723),
Development of a ceramic foam filter for filtering molten aluminium alloy in casting processes
2009
7.
Poria Matoorian (GS16823)
Development of Super Alloy machining
2008
8.
Khairul Nizam Md. Tohit (GS13383)
Improvement of accuracy level of automotive front fender shield assembly using process failure mode and effect analysis and control plan techniques.
2006
9.
M. Sayuti (GS12364)
Mechanical properties and characterization studies on the ascast quartz particulate reinforced LM6 alloy matrix composites
2006
10.
Wong Choon Tat
Design and fabrication of plastic injection mould
2004
11.
Kader Ibrahim Ab. Wahab
Wafers fabrication of bipolar transistor
2003
12.
Mohamad Irwan Yahaya
Reverse Engineering of free-form surfaces
2003
13.
Edi Sham Zainudin
Numerical Invesigation of Fibre Reinforced Polymer
2002
14.
Azman Senin
Optimisation of machining parameters in Wire
2002 Page 6/62
Cutting Process for Cooling Jig 15.
Mohd. Razali Samin
Robot Manipulation Tracjectory Planning in Complex Position
2002
16.
Mohd Khairol Anuar bin Mohd Ariffin
Design, Fabrication and Analysis of Plasting Injection Moulding Mould
2001
17.
Alex Lim Kheng Hooi
Thermal Analysis of Two and Three-gate Sand Casting Mould
2001
18.
Elfetori F. Abdewi
Using FEM in Optimisation of Die Casting Design
1999
19.
Md Samsul Abedin
Computer Aided Engineering in diecasting design
1997
Development of Auto Wire Bonder Expert System
1997
20. Ng Yu Ting
Master Completed (Co-Supervisor) No.
Name
Thesis Title
Year Graduated 2014
1.
Hamdan Yahya Ahmed Al-Ruhaimi (GS27013)
Automated approach for oil palm in vitro shoot sorting
2.
Seyed Ehfarzaneh Nojabaei (GS26533)
Development of priority oriented scheduling method to increase the efficiency and reliability of manufacturing system
2009
3.
Mohd Fauzi Hashim
Rigid Plastics FEA in metal forming processes
2007
4.
Mohandas a/l Krisnan
Design and development of labour productivity monitoring system in manufacturing
2007
5.
Sharifah Imihezri Syed Shaharudin (GS12124)
Clutch pedal design and fabrication for Injection moulding for polyamide-based short fibre reinforced composite
2005
6.
Lee Hoo Boon
Rapid Prototyping system of composite material products
2003
7.
Pitoon Nopnakorn
Development of 2D CAD software based on ISO technical drawing standard
2003
8.
A.K.M.Parves Iqbal
Development of an intelligent painter robot using Cartesian coordinate approach for construction industry
2002
9.
Tan Chee Fai
Development of hole recognition system using rulebased technique
2001
10.
Mohd Ahadlin Mohd Daud
The Evaluation of Mechinablity and Surface Texture of Tool Steel with Copper Electrode in Electro Discharge Machine
2001
11.
Ten Seng Teik
Emulation of the Space Robotics System on Earth
2001
Page 7/62
12.
Mohamed A.Abdulmawlla
CAD/CAM system for closed die forging Process
2000
13.
Elsadiq Mahdi Ahmed Saad
Design and Fabricate filament winding machine and analysis of cotton/epoxy and pandanus/epoxy
1997
14.
Mohabatul Zaman Bukhari
Development of no-clean solder for Radio Frequency power module
1996
15.
Shafina Sultana
Simulation-based analysis of kinematics, dynamics and control of space robots
1995
16.
Wan Tarmeze Wan Ariffin
Strength and Stiffness of joints in rattan furniture
1994
Master Completed (Supervisor – Without thesis) No.
Name
Thesis Title
Year Graduated 2015
1.
Mohd Kamarul Nizam bin Mahmood
Effect of Post Weld Heat Treatment Microstrcuture and Mechanical Properties of Carbon Steel Plate
2.
Amjad Ashor Mohamad
The Effect of Air Bleed on Jet Engine Performance
2015
3.
Khairil Amri bin Kamaruzzaman
Impact of Corrosion Coatings on Exposed Structures
2015
4.
Ahmed Ali M. Khan
Total Quality Management in Industry
2015
5.
Kong Yoke Yoon
A Study of Quality Control as a Competitive Tool for Small Scale Enterprises in Selangor
2015
6.
Mohd Shafei San
Design and fabrication of food automated system
2014
7.
Ismi Aishah Ishak
Service Quality/Management Engineering
2014
8.
Ili Marini Zainal Abidin
Implementing Lean Six Sigma For Process Improvement
2014
9.
Masni Ahmad Basri
Service Management in MAS
2014
10.
Halimaton Nabilah Mohd Husin
Total Quality Management in Food Industry
2014
11.
Rami Abdulhakeem
Maintenance Management in SME
2014
12.
Mohamad Juraidi Jamal
Natural composite material
2014
13.
Mohamad Shahidan
Machine maintenance
2014
14.
Noor Diyana Dahlan
Plastic Injection Mould
2014
15.
Rosidah Mohd Norsat
Computational Analysis in Manufacturing Process
2014
16.
Marwan Mat Salleh
Analysis of Used Polytops From Schools in Malaysia
2014 Page 8/62
17.
Joshua Raj
Solar Powered Car Ventilation System
2014
18.
Mohd Norhan GS33725
E-Procurement Integration:Impediment Face by Malaysia's Automakers Vendors
2013
19.
Safwan Azizi GS34652
Design of Plastic Injection Mould for thick wall product
2013
20.
Mohd Firdaus Dzulkafli GS32797
Maintenance Strategy Application in Industry
2013
21.
Zatil Hafila Kamaruddin GS33602
Metal Casting Process
2013
22.
Emeyusrezal Daud GS34894
The Development of Green Tech in Aotumotive Industry in Malaysia-Development Green Vehicle in Proton
2013
23.
Zatil Hazrati Kamaruddin GS33609
Fabrication of Skid Tank
2013
24.
Zulkefli Ismail GS34381
Hot Rolled Coil at The Steel Making Plant -The Quality Problems
2013
25.
Nazarul Abidin GS32796
Failure Analysis in Manufacturing Machinery / CAD CAM
2013
26.
Nasuha Menhat GS32649
Smartphone features among UPM students
2013
27.
Nur Atiqah Nik Shamsudin GS32658
Smartphone usage and the implecations among UPM’s students
2013
28.
Noor Syarida Abdul Rahman GS32912
Students satisfaction towards service quality of front counter staff in private university
2013
29.
Lim Ying Shing GS33076
Brand switching behavior over laptop brands among UPM students
2013
30.
Saeid Pourseifaddini GS31290
An approach to long-term recovery procedure as part of local disaster recovery management: A study on earthquakes Zarand, Iran 2005.
2013
31.
Alireza Rashidi GS33180
Application of value stream mapping in the furniture company
2013
32.
Ong Yu Lee GS33061
Development of a program to calculate plastic material property for non linear FE Analysis
2013
33.
Esadig Abdalla Mohammed Bushara GS31345
Fast moving consumer goods productivity improvement
2012
Page 9/62
34.
Seyed Sattar Emamian GS30919
Failure Analysis of Welding process
2012
35.
Nurul Zanariah Kolan GS31467
Maintenance IT equipment in training institute in Malaysia
2012
36.
Mirmani Mehrbakhsh GS29222
casting in jewellery (loss wax investment casting)
2012
37.
Amir Sayah Roshan Zamir GS31916
FEA in pressure vessel
2012
38.
Farbod Redaei GS29281
Construction project management
2012
39.
Sorosh Borozjani GS31299
FEA and improving wind turbine
2012
40.
Hamed Niakan GS31711
Supply chain management
2012
41.
Murugiah Sivasubramaniam
Back surface scribe ID for 200mm wafer fabrication
2011
42.
Megat Mohd Amzari Megat Mohd Aris
Analysis of 2-stroke small engine emission system
2011
43.
Firdaus Mohamed Sahid
Chips formation and tool wear characteristics of turning operation
2011
44.
Syarina Sharuddin
Analysis of plastic Injection moulding process
2011
45.
Ishak Mohamad Ali
Integrated Fluid Parametric Analyser
2010
46.
Zaidil Abdilla Ahmad Salehuddin
Project management of boat building and repair
2010
47.
Noorhazilah Baharin
2010
48.
Subramaniasarma a/l Sreenivasan
Risk management – irrigation project using pressurized piping system Simulation of thermoset manufacturing process
49.
Muhamad Hasnulhadi Mohamad Jaafar
Optimization of cutting parameter of tungsten carbide tool life turning process
2010
50.
Safari Hj Mat Desa
2010
51.
Zailani Zainal Abidin
Project management in hatchery rainfall building system Solid lubricant in machining process
52.
Nazrol Hj Mait
Comparison of dies to produce similar products
2010
53.
Shamsuddin Man
Process parameter for rectangular deep drawing
54.
Mohd Zairulnizam Mohd Zawawi
Analysis of an injection moulding parts using MoldFlow (feed system)
2010
55.
Roslan Mohamad Sharip
Design of single cavity hot runner mould for juice
2010
2010
2010
Page 10/62
cup Diecasting Finishing surface
56.
Farah Zaheeda Kamaruddin
2010
57.
Mahsa Hosseini
Risk based maintenance in Unit 4 Steam Generator of Bandar Abbas Power Plant
2010
58.
Syahrunizam Buyamin
Inventory Management System
2010
59.
Sohaimi Pawanchi
Improvement of CAD/CAM CNC process of gasing production
60.
Kaveh Faghihi
Customer Knowledge Management
2010
61.
Abdalsalam I. Fadeel
Development hybrid software between visual basic and CAD/CAM for gasing
2010
62.
Ahmed Osman Ahmed Babkir
Failure and successful strategic management in business Control and automation of manufacturing system
2010
63.
Umar Ali Umar
RFID: Control and automation of manufacturing system
2009
64.
Mah Way Sheng
Quality Management system
2009
65.
Ahmad Rosli Abdul Manap
Design of PIM for gasing
2009
66.
Zakaria A.Razak
Study of 3D mouldflow analysis for plastic spinning top (gasing)
2009
67.
Mohamad Oukal Alghali
Fundamental characteristics of metal flow in casting mould of aluminium alloys
2008
68.
Ahmed Alabedelah
2008
69.
Mohd. Afandi
Design and development of Keyboardless Book-Style Notebook Six Sigma project of Moulding Defect Reduction
70.
Mohammed Omran Wafi
Wettability of MMC
2007
71.
Tarek Marwan
Development of SiC reinforced MMC
2007
72.
Zan Zainudin
Die design and fabrication
2007
73.
Amizi Noor
Job-shop sequencing for small press shop
2007
74.
Adel Abulgasm Lahimer
Automated system of a Composite product fabrication
2007
75.
Yuslan Yasok
Design and development of press tool die for sheet metal product
2006
76.
Azmi Harun
Design and Analysis of mould for Plastic Injection Moulding
2006
77.
Nur Elya
Total Quality management in Perodua
2005
2008
Page 11/62
Bachelor Completed (Supervisor) No.
Name
Thesis Title
Year Graduated 2015
1.
Syed Zaki Ahmed
Improvement of metal properties by vibration casting technology
2.
Mohammad Afeef
RP of polymer based Tops (Gasing)
2015
3.
Mustika Ayu Muayanti
Design and fabrication of rope machine
2014
4.
Mohammad Zafirul Haris
Rice hush reinforced polypropylene composites
2014
5.
Shanmugaprian Rajasagaran
Design and Fabrication of sundial
2013
6.
Mohamad Asyraf Yusof
Fabrication of plastic injection mould
2013
7.
Shawali
Mechanical properties of Aluminium extruded parts
2012
8.
Firdaus
Sand mould vibrator
2012
9.
Faiz
Design and improvement of fuel furnace
2012
10.
Kamrul
Design and fabrication of fuel furnace 1
2011
11.
Azedi
Design and fabrication of fuel furnace 2
2011
12.
Mohammad Fathullah
Proton parts analysis
2010
13.
Khairil Hazri
Analysis and improvement of proton brake system 1
2010
14.
Firdaus Lokman Al Hakim
Analysis and improvement of proton brake system 2
2010
15.
Mohd Affindy
Application of CAD/CAM in Spinning top (gasing) production
2009
16.
Mohd Sharil
Production of thermoplastic spinning tops (gasing)
2009
17.
Erdy Herwan
Design and fabrication of ropes (for spinning tops) machine
2009
18.
Mohd Nasrol
Design and fabrication of spinning tops (gasing) machine
2009
19.
Radha Krishnan a/l Ponnan
Manufacturing of composite corrugated tubes
2008
Core and pattern making of castings
2008
20. Logeswaran a/l Kuppusamy
Page 12/62
21.
Fatin Suhana Mohd Ali
Metal flow and solidification of casting process
2008
22.
Muhammad Firdaus Hamad
Characteristics of Green sand casting
2007
23.
Mohd Azril Affindi
Development of Squeeze casting products
2007
24. Karthik Poobalan
Squeeze Casting process
2006
25.
Fabrication of composite products
2006
26. Lee Chee How
Thermal Analysis of Casting process
2006
27.
Squeeze casting for MMC
2006
28. Loo Boon Kian
Experimental studies on bullet-proof vest (Kevlar) with different stitching patterns
2005
29. Mohd Nazarudin Amir
Kajian pembentukan vortex dalam pengacuan cecair komposit matrik logam (Study of vortex development in stirring of metal matrix composite)
2005
30. Ilani Yaacob
Experimental investigation of 3-Component Balance
2004
31.
Harliza Mohd Yusof
Fan system of Wind Tunnel
2004
32.
Ahmad Mortaza
Pattern making using CAD/CAM system
2004
33.
Afdiman Anuar
Mechanical engineering services in construction industry
2003
34. Mohd Nadzru Abd. Rahman
Development of casting software
2003
35.
Development of emergency tube for motorcycles 1
2003
36. Mohd Rizal Adnan
Development of emergency tube for motorcycles 2
2003
37.
Kajian Keupayaan relau induksi di Makmal Foundri, (Study of Induction Furnace Performance II)
2002
38. Yusman Suratman
Kajian Keupayaan relau induksi di Makmal Foundri (Study of Induction Furnace Performance 1)
2002
39. Hazarudyn Syah Halim
Development of three components balance for wind tunnel 1
2002
40. Mohd Aznor Lamat
Development of three components balance for wind tunnel 2
2002
41.
Khairul Arif Ahmad Mahir
Development of sand casting process
2002
42.
Mohamad Zamri Jahaya
Emergency Tube System for Motocycles
2001
Software Development of Flow Analysis of Casting
2001
Weldaud Tulus
Ardy Affendy
Mohd Aatif Ali Mokhtar
Md. Shahril Mohamad Ambia
43. Leong Yew Boon
Page 13/62
44. Hafizal Abu Bakar
Design and Fabrication of Wind Tunnel Instrumentation
2001
45. Liom Hong Seng
Software Development of Thermal Analysis of Casting
2001
46. Muhammad Faizal Johan
Analisa Aliran Proses Acuan Suntikan Plastik (Analysis of process flow in Plastic Injection Moulding)
2000
47. Tan Chen Loon
Eksperimentasi Analisa Haba Dalam Proses Penuangan Pasir (Experimental analysis of heat transfer in sand casting process)
2000
48. Lai Tze Siung
Thermal Analysis of Sand Casting
2000
49. Goh Chin Hoi
Design and Fabrication of Plastic Injection Mould I
2000
50. Chong Joo Kwong
Design and Fabrication of Plastic Injection Mould II
2000
51.
Liew Chee Kin
Runner system in Plastic Injection Moulding
1999
52.
Lim Wei Siang
CAD/CAM application in Plastic Injection Moulding 1
1999
53.
Mohd Khudzairi Hj Razali
CAD/CAM application in Plastic Injection Moulding 2
1999
54. Shahid Sham Md Nor
Product development in Plastic injection moulding 1
1999
55.
Product development in Plastic injection moulding 2
1999
56. Hassan Fahmi Miskam
Molten metal flow in casting process
1999
57.
Thermal analysis of sand casting
1999
58. Md. Fauzi Ismail
A study on successful certification of ISO 9000 for Manufacturing Companies
1998
59. Mohd Badli Hj Ibrahim
Experimental preparation of thermal study in sand casting process
1998
60. Irwan Mohd Amir
Design and fabrication of mould for plastic injection moulding 1
1998
61.
Design and fabrication of mould for plastic injection moulding 2
1998
62. Aminuddin Abd. Aziz
CAD/CAM application in mould making
1998
63. Alias Ahmad
An application of robot and conveyor belt for automated handling system
1998
64. Safry Matnor
Design, Fabrication and Testing of a weather strip machine
1997
65. Majid Yahya
Development of CAD/CAM of casting process
1997
66. Mohd Arifin Samingun
Mould testing and investigation of flow characteristics of injection moulding machine
1997
Azaham Mohd Razali
Amirudin Abdul Aziz
Yusri Yusoff
Page 14/62
67. Chin Yong Keong
Design and Development of an automated orientation detection system with robot arm and Programmable Logic Control integration
1996
68. Wan Shaifuddin Wan Hashim
Analisa terma pemejalan dalam proses penuangan (Thermal analysis of solidification in casting process)
1996
69. Daniel Sahari
Rekabentuk dan pembinaan acuan mesin pengacuan suntikan plastik (Design and fabrication of a mould for plastic injection moulding machine)
1996
70. Abdul Razak Jaafar
Analisa aliran logam dan perbandingan dengan eksperimen (Metal flow analysis and comparison with experimental results)
1996
71.
Ahmad Rashidi Sabudin
Kajian aliran plastik dalam mesin pengacuan suntikan (Study of plastic flow in plastic injection moulding machine)
1995
72.
Tang Sai Hong
Gating system design in sand casting
1995
73.
Tham Chee Keen
Computer aided fluid flow analysis of the filling of casting system
1994
Analysis of molten metal flow in the feeding system of pressure diecasting
1993
74. Saravanan s/o Manickam
4. Research, Consultancy and Publication a. Grant Total Accumulated Funding: RM4,396,247 No
Duration
Title
Funding
Amount(RM)
Designation
1
Nov 2015Oct 2017
In-situ Titanium Diboride (TiB2) reinforced by Aluminium Alloy hybrid Metal matrix composites
FRGS
RM104,000
PI
2 2014-2015
Mathematical Modelling of Flow and Heat Transfer for Casted Aluminium Silicon Carbide
Research Acculturation Collaborative Effort (RACE)
RM70,000
PI
3 June 2013Oct 2015
Characterization and development of natural fibre reinforced unsaturated polyester based injection moulding composite material for electrical insulation application
FRGS
RM90,500
PI
4 Feb 2011Dec 2013
Investigation on the tailing sand (pasir bekas lombong) from ex-tin mines in Peninsular Malaysia dor use in making green sand casting mould
FRGS
RM52,000
PI
Page 15/62
5 March 2011-Dec 2013
Mecahnical properties of MMC LM6 reinforced titanium carbide using Mechanical vibration mould sand casting.
UPM RUGS
RM134,500
PI
6 Oct 2010June 2013
Aluminium alloy properties improvement in extrusion process
UPM RUGS
RM150,000
PI
7 Nov 2007Oct 2009
Analysis of molten metal, solidification and the effect of vibration of metal matrix composite (MMC) materials in casting process
FRGS
RM114,500
PI
8 Oct 2007Sept 2009
Manufacturing of metal matrix composite by squeeze casting technology for automotive applications
Sciencefund
RM154,400
PI
9 July 2007Jun 2009
Metal flow and Solidification of Casting Process
UPM RUGS
RM70,000
PI
10 April 2007March 2010
Microstructure and mechanical properties of squeeze cast A356 AlSi alloy inoculated with TiC
ScienceFund
RM92,498
PI
11 March 2004- Oct 2005
Study of Lift and Drag Forces of Aerodynamic Shapes in the Low Speed Wind Tunnel
UPM RUGS
RM50,000
PI
12 Jan 2002Dec 2006
Development and Analysis of Casting Product using Network Method of Flow and Solidification Process
IRPA Experimental Applied Research
RM168,000
PI
13 Jun 2002Jun 2003
Design and Fabrication of ThreeComponent Balance of Wind Tunnel.
UPM Short Term Research Project
RM15,000
PI
14 Jun 1999Jun 2000
Design and Fabrication Wind Tunnel Instrumentation
UPM Short Term Research Project
RM10,000
PI
15 Jun 1999Jun 2000
Design and Fabrication of Plastic Injection Mould
UPM Short Term Research Project
RM15,000
Pi
16 August 1995- Jan 1997
Development of Research Model to monitor skill demand for Metal Machining Industry
Ministry of Human Resources of Malaysia
RM159,471
PI
17 1996-2000
Finite Element Modelling of Casting Process
IRPA -MOSTI
RM268,000
PI
18 Oct 1995March 1996
Pre-stressed Fabrication Process for Filament Winding Tubes
University of Akron and Asian Development Bank
US15,000
PI
Page 16/62
19 1991-1995
Finite Element Analysis for Stress, Thermofluid and Vibrations
IRPA-MOSTI
RM550,000
PI
20 2014-2016
Parameters Optimization For Machining CFRP-Aluminum Composite Laminates
Science Fund (MOSTI)
151,000
Co
21 2012-2014
Development of an integrated Value Added Engineering methodology for Automotive Parts
FRGS
68,000
Co
22 July 2007Jun 2009
Development of Combinatorial Optimisation for Cutting tool path strategy
UPM RUGS
RM70,000
Co
23 2010-2012
Development of a Novel Evolutionary Algorithms for AGV Dynamic Routing In FMS Environment
RUGS
55,000
Co
24 2009-2011
Value Engineering link-up with university program Proton saga
PROTON
30,298
Co
25 2007-2009
Development of Combinatorial Optimisation for Cutting tool path strategy
RUGS
70,000
Co
26 2007-2009
Cutting Tool Path Optimisation Using Evolutionary Algorithm
FRGS
100,000
Co
27 2007-2008
Simulation of Cutting Tool Path Strategy for Thin Walled Section Part
NLSG (UPM)
10,000
Co
28 2007-2009
Analysis of flow and solidification of casting process
RUGS
83,000
Co
29 2002-2006
Damage Management of Sheet metal Forming Using Virtual Manufacturing
IRPA - MOSTI
RM168,000
Co
30 2002-2006
Development of Artificial Intelligent (AI) Based Expert System for Optimum Turning Process
IRPA - MOSTI
RM164,000
Co
31 2002-2006
Concurrent Engineering IRPA - MOSTI Manufacturing System of Polymeric – Based Composite Automotive Pedal Box
RM99,080
Co
32 1991-1995
Computer Integrated Manufacturing (CIM)
RM1,000,000
Co
IRPA - MOSTI
b. Fellowship / Travel Grant
Page 17/62
No
Duration
Title
Funding
Type
Designation
Jan 1994April 1994
Research attachement with Beijing Univesity
UNESCO (USD 20,000)
Travel and other expenditure
Researcher
2 March 1995May 1995
Research Attachment with Swansea University and Casting Industry
Asian Development Bank (USD15,000)
Travel and other expenditure
Researcher
3 Oct 1995March 1996
Research Attachemnt with Akron University, Ohio USA
Asian Development Bank (USD25,000)
Travel, research and other expenditure
Researcher
1
c. Consultancy No
Duration
Title
Funding
Designation
20152017
Reference Module of Material Science and Enginineeirng
Elsevier
Editor/Reviewer
2 20122014
Kuantan (Master of Manufacturing System Engineering)
Kuantan Program
Expert (Teaching Courses – Advanced Manufacturing Process and Technology and Automation and Robotic)
3 20122014
Kuwait (Master of Engineering Program)
Kuwait Program
Expert (Teaching Course – Automation and Robotic and Total Quality Management)
4 20022014
Evaluation of final exam paper of INTI
INTI University
Expert (Engineerring Courses)
5 2010
Engineering Design Course
UPM Education & Training Sdn. Bhd.
Expert (Teaching Courses)
6 19992004
Mould and Die Technology
German Malaysia Institute
External Verification of the student Project
7 2002
Study of the pump characteristics and performance
PEDECO Management Sdn Bhd
Head (Research Contract)
8 19941998
Development of Engineering Curriculum for MSc in Manufacturing Systems Engineering
MOTOROLA Seremban
Expert (Curriculum and Engineering Courses)
9 19951997
Development of Research Model to monitor skill demand for Metal Machining Industry
Ministry of Human Resources, Malaysia
Head (Research Contract)
1
Page 18/62
d. Patent/ Copyright/ Trademark No
Detail
Registration No
Year
1
A self-propelled hydraulic floor crane
PI2012001330
2012
2
Plastic Made Gasing Top
PI2012000680 (Malaysia)
2012
3
Apparatus for producing Corrugated Composite Structure and method for making the same
PI 20063841
2006
e. Publications SCOPUS ID: 12647225400 H-index:11 Book/Chapter in Book (Author/Editor)/Technical Report/Guidelines / Policy 1
M.S.J. Hashmi and S.Sulaiman, Material Application, Performance and Life Cycle. In Reference Module on Materials Science and Materials Engineering: Elsevier Ltd, Dec 2015.
2
S. Sulaiman and S.Emamian, Optimum Speed of Friction Stir Welding on 304L Stainless Steel by Finite Element Method. In Comprehensive Materials Processing; Bayraktar, E., Ed.; Elsevier Ltd., 2014; Vol. 6, pp 227–236.
3
M. Sayuti, S. Sulaiman, T.R. Vijayaram, B.T.H.T Baharudin and M.K.A. Arifin, Manufacturing and Properties of Quartz (SiO2) Particulate Reinforced Al-11.8%Si Matrix Composites, Composites and their properties, Chapter 18, InTech Pub. (2012)
4
Daryoush Safarzadeh and Shamsuddin Sulaiman, “Self-Propelled Hydraulic Floor Crane – Design, Development and Manufacturing”, LAMBERT Academic Publishing, Saarbrucken Germany 2012. ISBN: 978-3-659-18991-3
5
M. Sayuti, S. Sulaiman, T.R. Vijayaram, B.T.H.T Baharudin and M.K.A. Arifin, (2012), Manufacturing and Properties of Quartz (SiO2) Particulate Reinforced Al-11.8%Si Matrix Composites, Composites and Their Properties, Intech, 978-953-51-0711-8
6
A.M.S.Hamouda, S.Sulaiman, M.Ahmadun, Technologies”, Volume 1, SIRIM Press, 1998
“Advances
in
Material
and
Processing
7
A.M.S.Hamouda, S.Sulaiman, M.Ahmadun, Technologies”, Volume 2, SIRIM Press, 1998
“Advances
in
Material
and
Processing
8
Shahnor Basri, Shamsuddin Sulaiman, A. Rahim Md. Amin, “Sistem Pengeluaran - Satu Pengenalan (Production System - An Introduction)”, Book published by Dept. of Mechanical and Systems Engineering UPM 1987 Citation Index/Refereed Journals Journals
1
J. Nemati, G.H.Majzoobi, S. Sulaiman, B.T.H.T.Baharudin, and M.A.Azmah Hanim, “Effect of equal channel angular extrusion in Al-6063 bending fatique characteristics”,Int. Journal of Minerals, Metallurgy and Materials, April 2015, Vol 22, Issue 4, pp 395-404.
Page 19/62
2
J. Nemati, G.H.Majzoobi, J.Pipelzadeh and S. Sulaiman, “Characterization of mechanical properties of Al-6063 deformed by ECAE”, Int. Journal of Advanced manufacturing Technology, (in press).
3
H.M.Magid, S. Sulaiman, M.K.A.Ariffin and B.T.H.T. Baharudin, “Enhancement and improvement of the mechanical properties of aluminium extruded products by mathematical analysis and simulation process”, AIP (2015), 1660, 070113.
4
B.G. Jahun, D.Ahmad, M.R.Mahdi and S.Sulaiman, “Design optimization parameters for tractor mounted mulcher blades”, Int. Journal of Applied Engineering Research, 10(23), (2015) pp 4346143464.
5
S.Sreenivasan, S.Sulaiman, B.T.H.T.Baharudin, M.K.A. Ariffin and K.Abdan, “ Mechanical Properties of novel kenaf short fiber reinforced bulk molding compound (BMC)”, Journal of Advances in Materials and Processing Technologies, Taylor & Francis, Vol 1, Issue 1-2, 2015, pp49-55.
6
M.S. Al-Khaldi, M.K.A. Ariffin, S.Sulaiman, B.T.H. Baharudin and N.A. Aziz, “ Improvement in CAM shaft design: An Experimental application and recommendation”, Applied Mechanics and Materials Vol. 780-790 (2015) pp 249-254.
7
M.D. Azaman, S.M. Sapuan, S.Sulaiman, E.S. Zainudin and A. Khalina, “Numerical Simulation Analysis of Unfilled and Filled Reinforced Polypropylene on Thin-Walled Parts Formed Using the Injection-Moulding Process”, Int. Journal of Polymer Science, 2015, 659321.
8
M.D. Azaman, S.M. Sapuan, S.Sulaiman, E.S. Zainudin and A. Khalina, “Optimization and numerical simulation analysis for molded thin-walled parts fabricated using wood-filled polypropylene composite via plastic injection molding”, Polymer Engineering and Science,(2015), 11(1), pp. 2531-2540.
9
N.Fachurrohman, S.Sulaiman, S.M.Sapuan, M.K.A.Ariffin and B.T.H.T.Baharudin, “Analysis of a metal matrix composite automotive component”, Int. Journal of Automotive and Mechanical Engineering, (2015), 11 (1), pp. 2531-2540.
10
Rosmamuhamadani Ramli, Shamsuddin Sulaiman, Mohd Idris Shah Ismail, Azmah Hanim Mohamed Arif, and Mahesh Kumar Talari, “Wear Properties of Metal Matrix Composite Al-Cu and Al-Cu-TiB2”, Material Science Forum Vol 819 (2015) pp268-273.
11
Hani Mizhir Magid, S.Sulaiman, M.K.A.Ariffin and B.T.H.T. Baharudin, “Modelling and Simulation of hollow Profile Aluminium Extruded Product”, Applied Mechanics and Materials Vol. 761 (2015) pp 17-21.
12
Ahmad Aizuddin Abd Aziz, Shamsuddin Sulaiman, Aung Lwin Moe and and Aminudin Abu, “Investigation of Plastic Injection Moulding Process Optimization in Complex shape Product”, Applied Mechanics and Materials Vol. 695 (2015) pp 260-264.
13
S.Sulaiman, A. Roshan and S. Borazjani, “Effect of cutting parameter on tool-chip interface temperature in an orthogonal turning process”, Applied Mechanics and Materials Vol. 529 (2014) pp 21-26.
14
S.Sulaiman, S. Borazjani and A. Roshan, “Finite Element Analysis of Aluminium-Kevlar/Epoxy Pressure Vessel”, Applied Mechanics and Materials Vol. 529 (2014) pp 27-32
15
M.U.Rosli, M.K.A.Ariffin, S.M.Sapuan and S.Sulaiman, “Integrated TRIZ-AHP Support System for Conceptual Design”, Applied Mechanics and Materials Vol. 548-549 (2014) pp 1998-2002
16
M.D. Azaman, S.M.Sapuan, S.Sulaiman, E.S. Zainudin and A. Khalina, “Numerical simulation on moulded thin-walled parts via injection moulding process”, Applied Mechanics and Materials Vol. 575 (2014), pp 73-77. Page 20/62
17
S.H.Tang, Shiva Sadat Moosavipur, S.Sulaiman, M.K.A.M.Ariffin and Morteza Ghobakhloo, “The impact of information technology investment on supply chain capabilities: A review”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp723-726.
18
Hani Mizhir Magid, S. Sulaiman, M.K.A. Ariffin and B.T.H.T. Baharudin, Modeling and Simulation of Forward Al Extrusion Process Using FEM, Applied Mechanics and Materials Vol. 564 (2014) pp 525-532.
19
Masha Nur Salsabiela Menhat, M.K.A. Ariffin, S.Sulaiman and S.H.Tang, “Managing uncertainty in supply chain management of vessel chatering in Oil and Gas Industry”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp694-699.
20
J. Nemati, S. Sulaiman, Hani Mizhir Magid, B.T.H.T.Baharudin, G.H.Majzoobi and M.A.Azmah Hanim, “Development of microstructure and fracture of Al-6063 alloy using equal channel angular extrusion”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp488-494.
21
Muhammad Yusuf, M.K.A.Ariffin, N. Ismail and S.Sulaiman, “Effect of machining process on surface microhardness of Titanium carbide reinforced aluminium LM6 composite”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp495-500.
22
Tang S.H., Shiva Sadat Moosavipu, S. Sulaiman, M.K.A.M. Ariffin and Morteza Ghobakhloo, The impact of information technology investment on supply chain capabilities: A review, Applied Mechanics and Materials Vol. 564 (2014) pp 723-726.
23
J. Nemati, S. Sulaiman, Hani Mizhir Magid, B.T.H.T.Baharudin, G.H.Majzoobi and M.A.Azmah Hanim, “Microharness characteristics of Al-6063 alloy processed by equal channel angular extrusion”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014) pp513-518.
24
B.T.H.T.Baharudin, K.P.Ng, S.Sulaiman, R.Samin and M.S.Ismail, “Temperature distribution of micro milling process due to uncut chip thickness”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp 214-221.
25
Mona Kiaee, Shamsuddin Sulaiman and Tang Sai Hong, “Investigation on microstructure and Mechanical Properties of Squeeze Cast Al-Si Alloys by Numerical Simulation”, Advanced Materials Research Vol. 1043 (2014) pp 31-35.
26
H. M. Magid*, S. Sulaiman, M. K. A. M. Ariffin and B. T. H. T. Baharudin, Stress analysis of forward aluminium extrusion process using finite element method, Materials Research Innovations, Vol 18, s2 (1-5), 2014.
27
J.Nemati, S.Sulaiman, G.H.Majzoobi and B.T.H.T. Baharudin, “Finite Element Study of Deformation Behaviour of Al-6063 Alloy Developed by Equal Channel Angular Extrusion”, Advanced Materials Research Vol. 1043 (2014) pp 119-123
28
M.K.A Ariffin, Hazami B. Che Hussain, S.B. Mohammed and S. Sulaiman, Determining Optimum Electro Discharge Machining Parameters for Drilling of a Small Hole by Utilizing Taguchi Method, Applied Mechanics and Materials Vol. 564 (2014) pp 481-487.
29
Muhammad Yusuf, M.K.A. Ariffin, N. Ismail and S. Sulaiman, Effect of Machining Process on Surface Microhardness of Titanium Carbide Reinforced Aluminium LM6 Composite, Applied Mechanics and Materials Vol. 564 (2014) pp 495-500.
Page 21/62
30
J.Nemati, S.Sulaiman, G.H.Majzoobi, B.T.H.T. Baharudin and M.A.Azmah Hanim, “Finite Element and metallurgical study of properties of deformed pure copperby ECAE at various strain rates”, Proc ImechE Part C: J Mechanical Engineering Science 2014. Vol 228(9) pp1461-1473.
31
M.D.Azaman, S.M.Sapuan, S.Sulaiman, E.S.Zainudin and A.Khalina, “ Numerical simulation analysis of the in-cavity residual stress distribution of lignocellulosic (wood) polymer composites used in shallow thin-walled parts formed by the injection moulding process”, (2014) Materials and Design 55, pp. 381-386.
32
Suraya Sulaiman, Shamsuddin Sulaiman, Munira Ali and Fazilah Abdul Aziz, “Effect of TiC particulate on the microstructure and mechanical properties of Aluminium-Based Metal Matrix Composite”, Applied Mechanics and Materials Vol. 529 (2014) pp 145-150.
33
Masha Nur Salsabiela Menhat, M.K.A. Ariffin, S. Sulaiman and Tang S.H., Managing Uncertainty in Supply Chain Management of Vessel Chartering in Oil & Gas Industry, Applied Mechanics and Materials Vol. 564 (2014) pp 694-699.
34
Subramaniasarma Sreenivasan, Sameer Adnan Ibraheem, Shamsuddin Sulaiman, B. T. Hang Tuah Baharudin, Mohd K. A. Ariffin and K. Abdan, Evaluation of Combined Treatments Of Natural Fibers: Kenaf, Abaca And Oil Palm Fibers Using Micromechanical and SEM Methods, Advanced Materials Research Vols. 912-914 (2014) pp 1932-1939.
35
S. Sulaiman, M. K. A. Ariffin and A. Roshan1, Finite Element Modeling of the Effect of Tool Rake Angle on Cutting Force and Tool Temperature during High Speed Machining of AISI 1045 Steel, Advanced Materials Research Vol. 939 (2014) pp 194-200.
36
Suraya Sulaiman, Shamsuddin Sulaiman, Nur Najmiah Jaafar and Nor Imrah Yusoff, “ Studies on tensile properties of Titanium Carbide (TiC) particulate composite”, Applied Mechanics and Materials Vol. 529 (2014) pp 151-156
37
S.Sulaiman, A. Roshan and S. Borazjani, “Effect of cutting parameter on tool-chip interface temperature in an orthogonal turning process”, Advanced Meterials Research, Vol. 903 (2014) pp 21-26.
38
H.M.Magid, S.Sulaiman, M.K.A.M.Ariffin and B.T.H.T. Baharudin, “Stress analysis of forward aluminium extrusion process using finite element method”, Material Research Innovations, 2014.Vol. 18, Suppl 2, S2-1 to S2-6.
39
M Yusuf, M.K.A. Ariffin, N Ismail, S Sulaiman, “Surface Quality and Chip Formation in Turning of LM6 Aluminium Alloy and Particulate Reinforced Metal Matrix Composite”, Materials Science Forum 773, pp. 894-901, 2014. (ISI, Refereed).
40
M Yusuf, MKA Ariffin, N Ismail, S Sulaiman, “Experimental Investigation on Surface Roughness and Tool Wear in Dry Machining of TiC Reinforced Aluminium LM6 Composite”, Materials Science Forum 773, 339-347, 2014. (ISI, Refereed).
41
M Sayuti, S Sulaiman, B Baharudin, MKA Ariffin, “The Influence of Mechanical Mold Vibration on Temperature Distribution and Physical Properties of Al-11.8% Si Matrix Composites”, Materials Science Forum 773, 195-202, 2014. (ISI, Refereed).
42
A Abdullah, S Sulaiman, B Baharudin, MKA Ariffin, N Haliza, “Mechanical Properties of Tin Tailing Sand-Clay Mixture from Batu Gajah, Perak, Malaysia for Making Greensand Casting Mould”, Materials Science Forum 773, 211-217, 2014. (ISI, Refereed).
43
S.Sulaiman, A. Roshan and S. Borazjani, “Finite Element of Aluminiu-Kevlar/Epoxy Pressure Vessel”, Advanced Meterials Research, Vol. 903 (2014) pp 27-32.
Page 22/62
44
Suraya Sulaiman, Shamsuddin Sulaiman, Miunira Ali and Fazilah Abdul Aziz, “Effect of TiC particulate on the microstructure and mechanical properties of Aluminium-Based Metal Matrix Composite”, Advanced Materials Research Vol. 903 (2014) pp 145-150.
45
Suraya Sulaiman, Shamsuddin Sulaiman, Nur Najmiah Jaafar and Nor Imrah Yusoff, “ Studies on tensile properties of Titanium Carbide (TiC) particulate composite”, Advanced Materials Research Vol. 903 (2014) pp 151-156.
46
M.Syahrir Ahmad, B.T.H.T Baharudin, Z.Leman, N.Ismail and S.Sulaiman, “Thermal parameter affects on the part built using 3D printer Projet SD 3000”, Materials Science Forum Vols. 773-774 (2014) pp 841-849.
47
S.Sulaiman, J. Nemati, Hani Mizhir Magid, B.T.H.T.Baharudin, G.H.Majzoobi and M.A.Azmah Hanim, “Experimental Study of impact strength of Al-6063 alloy Processed by equal channel angular extrusion”, Advanced Materials Research Vol. 911 (2014) pp 158-162.
48
T.R. Sahroni and S.Sulaiman, “Casting quality model for casted aluminium silicon carbide based on non-linear thermal expansion”, Int. J. Materials and Product Technology, Vol. 48, Nos. 1/2/3/4, 2014, pp217-233.
49
Amer N.N.Kakahy, D.Ahmad, Md. Akhir, S.Sulaiman and Ishak A, “Effects of knife shapes and cutting speeds of a mover on the power consumption for pulverizing sweet potato vine”, Key Engineering Materials Vols. 594-595 (2014) pp1126-1130.
50
B.T.H.T. Baharudin, K.P.Ng, S.Sulaiman, R. Samin and M.S.Ismail, “ Temperature distribution of micro milling process due to uncut chop thickness”, Advanced Meterials Research, Vol. 939 (2014) pp 214-221.
51
M.Syahrir Ahmad, B.T.H.T Baharudin, Z.Leman, N.Ismail and S.Sulaiman, “Thermal parameter affects on the part built using 3D printer Projet SD 3000”, Materials Science Forum Vols. 773-774 (2014) pp 833-841.
52
Uzair Rosli, M.K.A.Ariffin, S.M.Sapuan and S.Sulaiman, “Problems evaluation for TRIZ methods using AHP: Case study on car’s dashboard improvement design concepts”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp89-93.
53
C.N.A.Jaafar, I.Zainol, S.Sulaiman and M.I.Ayub, “ Effects of PVA-PEG binder system on microstructure and properties of sintered Alumina”, Int. Journal of Applied Mechanics and Materials, Vol. 564 (2014), pp355-360.
54
Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Effects of feeding angles and cutting speeds of a mower blade with serrated edges on the pulverization of sweet potato vines”, Advanced Materials Research Vol. 626 (2013), pp260-264.
55
S. Sulaiman, S. Emamian, M. N. Sheikholeslam, and M. Mehrpouya, "Review of the Effects of Friction Stir Welding Speed on Stainless Steel Type 304L," International Journal of Materials, Mechanics and Manufacturing vol. 1, no. 1, pp. 85-87, 2013.
56
M.D. Azaman, S.M. Sapuan, S.Sulaiman, E.S.Zainudin, K.Abdan and M.R.Mansor, “An investigation of the processability of natural fibre reinforced polymer composites on shallow and flat-thin walled parts by Injection moulding process”, Materials and Design 50 (2013) 451-456.
57
S.Sreenivasan. S.Sulaiman, B.T.H.T. Baharudin, M.K.A. Ariffin and K. Abdan, “Recent developments of kenaf fibre reinforced thermoset composites: review”, Int. Journal of Maerials Research Innovations, Vol.17, Suppl 2, (2013), pp s2-1 –s2-11.
58
Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Pulverization of sweet Page 23/62
potato vine at different mover speeds”, IOP Conf. Series: Materials Science and Engineering 50 (2013) 012022. 59
Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Effects of cutting speeds and moisture content on grass chopping (pulverizing)”, Advanced Science letters, Vol 19, No. 9, Sept 2013, pp. 2533-2535.
60
S.Sulaiman, A.Roshan and S.Borazjani, “Finite element modeling and simulation of machining of Titanium alloy and H13 Tool Steel using PCBN Tool”, Applied Mechanics and Materials, Vols. 392 (2013) pp 36-40.
61
S.Sulaiman, A.Roshan and S.Borazjani, “Effect of cutting parameters on cutting temperature of TiAl6V4 Alloy”, Applied Mechanics and Materials, Vols. 392 (2013) pp 68-72.
62
S.Sulaiman, S.Borazjani, A.Roshan and S. Heydaryan, “Failure analysis of aluminium reinforced composite vessel”, Applied Mechanics and Materials, Vols. 392 (2013) pp 178-182.
63
Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Effect of feeding angles and cutting speeds of a mover knife with serrated edges on the pulverization of sweet potato vines”, Advanced Materials Research Vol. 626 (2013) pp 260-264.
64
Amer N. N. Kakahy, D. Ahmad, MD. Akhir, S. Sulaiman and Ishak A, “Effect of knife shapes and cutting speeds of a mover on the percentage pulverization of sweet potato vine”, Applied Mechanics and Materials, Vols. 421 (2013) pp29-33.
65
R.S.Taufik and S.Sulaiman, “Thermal expansion model for cast aluminium Silicone carbide”, Procedia Engineering 68 (2013) pp. 392-398.
66
Jamshid Nemati, S.Sulaiman, Gholam Hossein Majzoobi, B.T.H.T.Baharudin and Azma Hanim Mohamed Ariff, “Effect of equal channel angular extrusion on fatique life of pure Copper”, Advanced Materials Research Vol. 685 (2013) pp 97-101.
67
S.Sulaiman, S.Borazjani and S.H.Tang, “Finite element analysis of filament-wound composite pressure vessel under internal pressure”, IOP Conf. Series: Materials Science and Engineering 50 (2013) 012061.
68
S.Sulaiman and N.A. Ismail, “Analysis of failure in manufacturing machinery”, IOP Conf. Series: Materials Science and Engineering 50 (1) (2013) 012057.
69
D.Ahmad, O.Jamarei, S.Sulaiman, A.B. Fashina and F.B.Akande, “Modelling of motion resistance ratios of pneumatic and rigid bicycle wheel”, Pertanika Journal of Science & Technology, Vol.21(1) Jan 2013, pp. 59-74.
70
A.Abdullah, S.Sulaiman, B.T.H.T.Baharudin, M.K.A.Ariffin and T.R.Vijayaram, “Green compression strength of tin mine tailing sand for green sand casting mold”, (2013) Pertanika Journal of Science and Technology 21 (2) pp.335-342.
71
T.S. Hong, R. Samin, S. Sulaiman and Weria Khaksar, ‘Development of an Educational Robotic Training Kit”, Int. Journal of Advanced Science Letters (2013) 19 (11) pp. 3304-3306.
72
Shamsuddin Sulaiman, SH Tang, M.K.A.M Ariffin, A Saleh, “Influence of Pattern Coating Thickness on Porosity and Mechanical Properties of Lost Foam Casting of Al-Si (LM6) Alloy”, Applied Mechanics and Materials, Vol 300, pp. 1281-1284, 2013. (ISI, Refereed)
73
S Sulaiman, M.K.A.M Ariffin, TS Hong, NA Mustafa, Effect of Boric Acid Mixture as Solid Lubricant towards Machining Processes, Advanced Materials Research, Vol 651, 372-377, 2013 (ISI, Refereed) Page 24/62
74
Nanang Fatchurrohman, Shamsuddin Sulaiman, SM Sapuan, M.K.A Ariffin, BTHT Baharuddin, “Generic Framework for Conceptual Design Using Concurrent Engineering Strategy. A Case Study: Advanced Material Application Product Development of Metal Matrix Composite Component”, Advanced Materials Research, Vol 626, 99-108, 2013 (ISI, Refereed)
75
N Fatchurrohman, S Sulaiman, SM Sapuan, MKA Ariffin, B Baharuddin, “New Technique for Conceptual Selection of Manufacturing Process and Material, Case Study: Metal Matrix Composite Component”, Advanced Materials Research, Vol 626, 82-86, 2013 (ISI, Refereed).
76
M. U. Rosli, M. K. A. Ariffin, S. M. Sapuan, and S. Sulaiman, “Integrated AHP-TRIZ Innovation Method for Automotive Door Panel Design”, International Journal of Engineering and Technology (IJET), Vol 5 No 3, 3158-3167, 2013.
77
M. U. Rosli, M. K. A. Ariffin, S. M. Sapuan, and S. Sulaiman, "Integrating TRIZ and AHP: A MPV_s Utility Compartment Improvement Design Concepts," International Journal of Materials, Mechanics and Manufacturing, vol. 1, no. 1, pp. 32-35, 2013. (Refereed)
78
S. Sulaiman, , Umar Ali Umar, S.H. Tang, N. Fatchurrohman, Application of Radio Frequency Identification (RFID) in Manufacturing in Malaysia, Procedia Engineering, Vol. 50(2012), pp. 697706
79
Amer N. N. Kakahy, D. Ahmad, MD. Akhir , Sulaiman S. and Ishak A, “Pulverizing sweet potato vines with different knife angles and different cutting speed”, International Journal of emerging technology and advanced Engineering (2012)
80
N. Fatchurrohman, S.Sulaiman, M.K.A. Ariffin, B.T.H.T.Baharuddin, and A.A.Faieza, “ Solidification characteristic of titanium carbide particulate reinforced aluminium alloy matrix composites”, Journal of Engineering Science and Technology 7(2) 2012, pp248-256.
81
Seyedehfarzaneh Nojabaei, Z. Leman, S.H. Tang and S.Sulaiman, “Development of Priority Oriented Scheduling Method to Increase the Reliability of Manufacturing System”, American Journal of Applied Science 9 (9), 2012, pp1435-1442.
82
Shahla Seifi, Norzima Zulkifli, Rosnah Yusuff and Shamsuddin Sulaiman, “Information requirements for sustainable consumption”, Social responsibility Journal, Emerald, Vol. 8 Iss:3 (2012). pp.433-411.
83
Taufik Roni Sahroni, Shamsuddin Sulaiman, B. T Hang Tuah Baharudin1, Mohd Khairol Anuar Mohd Ariffin, Hambali Arep@Ariff, “Design and Simulation on Investment Casting Mold for Metal Matrix Composite Material”, Advances in Mechanical Engineering, Volume 2, Number 4, pp 33-39, 2012 (ISI, Refereed)
84
Sayuti, M., Sulaiman, S., Baharudin, B. T. H., M.K.H, Ariffin., Suraya, S., and Vijayaram, T. R, “Effect of Mould Vibration on Mechanical Properties of Particulate Reinforced Aluminium Alloy Matrix Composite”, Advanced Material Research, 445, 475-480, 2012, (ISI, Refereed)
85
Sayuti M., S. Sulaiman, B.T.H.T, Baharudin, M.K.A, Arifin, Vijayaram.T.R, and Suraya S, “Influence of Mechanical Vibration Moulding Process on the Tensile Properties of TiC Reinforced LM6 Alloy Composite Castings”, Advances in Mechanical Engineering, Volume 2, Number 4, pp 13-17, 2012 (ISI, Refereed)
86
N. Fatchurrohman, S.Sulaiman, M.K.A. Ariffin, B.T.H.T.Baharuddin, and A.A.Faieza, “Solidification characteristic of titanium carbide particulate reinforced aluminium alloy matrix composites”, Journal of Engineering Science and Technology, 7, 2, 248-256, 2012 (Refereed)
87
N. Fatchurrohman, S. Sulaiman, S.M. Sapuan, M.K.A. Ariffin and B.T.H.T. Baharuddin, “A new Page 25/62
concurrent engineering - multi criteria decision making technique for conceptual design selection”, Applied Mechanics and Materials, 225, 293-298, 2012 (Refereed) 88
Muhammad Yusuf, M.K.A. Ariffin, N.Ismail, S. Sulaiman, “Chip formation and surface roughness in dry machining of Aluminium Alloys”, Advanced Science Letters, Volume 19, Number 8, pp. 2343-2346(4), impact factor: 1.25 August 2013.
89
Muhammad Yusuf, M.K.A. Ariffin, N. Ismail and S. Sulaiman, “Optimization of Cutting Parameters on Turning Process Based on Surface Roughness using Response Surface Methodology”, Applied Mechanics and Materials Vols. 117-119, pp 1561-1565, 2012 (ISI, Refereed)
90
Mostafa Badakhshian, Shamsuddin B. Sulaiman and Mohd Khairol Anuar B. Mohd Ariffin, “Performance optimization of simultaneous machine and automated guided vehicle scheduling using fuzzy logic controller based genetic algorithm”, International Journal of Physical Sciences Vol. 7(9), pp. 1461 - 1471, 2012 (ISI, IF 0.52)
91
Amer N. N. Kakahy, D. Ahmad, MD. Akhir , Sulaiman S. and Ishak A, “Pulverizing sweet potato vines with different knife angles and different cutting speed”, International Journal of emerging technology and advanced Engineering (2012)
92
Ali Hashemi, Desa Ahmad, Jamarei Othman and Shamsuddin Sulaiman, “ Development and testing of a new tillage apparatus”, Journal of Agricultural Science;, Vol. 4. No. 7; (2012), pp. 103-106.
93
M. Nikbakht, N.Zulkifli, N.Ismail, S.Sulaiman, A.Sadrnia and M.Suleiman, “Multi-echelon supply chain design in natural gas Industry”, World Applied Science Journal, 20(1), 2012, pp. 54-63.
94
S.Sulaiman, M.K.A.M.Ariffin and S.Y.Lai, “Springback behaviour in sheet metal forming for automotive door”, AASRI Procedia 3 (2012) pp.224-229.
95
S.H.Tang, N.Hakim, W.Khaksar, S.Sulaiman, M.K.A.Ariffin and R.Samin, “Artificial Neural Network (ANN) approach for predicting friction coefficient of roller Burnishing AL6061”, Int. Journal of Machine Learning and Computing, Vol. 2, No. 6, December 2012, pp. 825-830.
96
T.R.Vijayaram, A.Abdullah and S.Sulaiman, “Determination of green compression strength and permeability of tailing sand for metal casting Industries gathered from ex tin mines in Perak State Malaysia”, Indian Foundry Journal, Vol 58, No.10, October 2012, pp.29-33.
97
M.K.A Ariffin, S.Sulaiman, Tang S.H., M.roshdi, S.B. Mohammed, “The effects of different grades of hob cutter in determining gear tooth accuracy”, Advanced Science Letters, 13, 519524, 2012 (ISI, IF 1.253).
98
M. Sayuti, S. Sulaiman, T. R. Vijayaram, B. T. H. T. Baharudin, and M. K. A. Arifin, “Manufacturing of TiC Particulate Reinforced Al-11.8 Si Matrix Composites by Mechanical Vibration Mould”, Adv. Sci. Lett. 15, 12-15, 2012 (ISI, IF 1.253)
99
A. Abdullah, S. Sulaiman, B.T.H.T. Baharudin, M.K.A. Ariffin, T.R.Vijayaram, “Effect of Moisture Content on the Permeability of Tailing Sand Samples Gathered from Ex Tin Mines in Perak State Malaysia”, Advances in Mechanical Engineering, Volume 2, Number 4,pp 18-23, 2012 (ISI, Refereed)
100 A Abdullah, Shamsuddin Sulaiman, BT Baharudin, MKA Ariffin, TR Vijayaram, Mohd Sayuti, “Testing for Green Compression Strength and Permeability Properties on the Tailing Sand Samples Gathered from Ex Tin Mines in Perak State, Malaysia”, Advanced Materials Research, Vol 445, pp. 859-864, 2012 (ISI, Refereed) 101 Amer N. N. Kakahy, D. Ahmad, MD. Akhir , Sulaiman S. and Ishak A., “Effects of Cutting Speeds and Moisture Content on Grass Chopping (Pulverizing)”, Advanced Science Letters, (2012). Page 26/62
102 S.Suraya, S.Sulaiman, M.K.A M Arrifin and M.Sayuti, “Computer simulation and experimental investigation of solidification casting process”, key engineering materials, volume 417-472, pp 601-605, 2011 (ISI, Refereed) 103 S.Sulaiman, tang S Hong, S. Pawanchi, G.R. Esmaeilian, M.K.A Mohd Ariffin, B.T. Hang Tuah Baharuddin, “Improvement of Tops Spinning Manufacturing with CNC lathe”, Procedia Engineering, Vol 15, pp 3886-3890. 2011 (ISI, Refereed) 104 S.Sulaiman, M.K.A Mohd Ariffin, G.R. Esmaeilian, , K. Faghihi, B.T. Hang Tuah Baharuddin, “Customer Knowledge Management Application in Malaysian Mobile Service Providers”, Procedia Engineering. Vol 15 (2011) pp 3891-3895. 2011 (ISI, Refereed) 105 D.Ahmad, S.Shamsuddin, A.B.Fashina and F.B.Akande, “Development of a tractor-pulled motion resistance test rig for traction studies on towed narrow wheels”, Int. J Agric & Biol Eng, Vol.4 No. 4 (Dec 2011) pp21-27. 106 N.Fatchurrohman, S.Sulaiman, M.K.A M Arrifin, A.A Faieza and B.T.H.T. Baharudin, “Metal matrix composites: solidification parameters of aluminium-11.8% silicon alloy reinforced with titanium carbide particulates”, key engineering materials, volume 417-472, pp 1081-1084, 2011 (ISI, Refereed) 107 Mohd Sayuti, S. Suraya, Shamsuddin Sulaiman, T.R. Vijayaram, Mohd Khairol H. Arifin, B.T. Hang Tuah Baharudin, “Thermal Investigation of Aluminium - 11.8% Silicon(LM6) Reinforced SiO2-Particles”, Advance in material and processing technology II, Vol 264-265, pp 620-625, 2011 (ISI, Refereed) 108 M.Yusuf, K.Anuar, N.Ismail and S.Sulaiman, “Influence of cutting parameters on surface roughness for wet and dry turning process”, key engineering materials, volume 417-472, pp 227232, 2011. (ISI, Refereed) 109 M.Sayuti, S.Sulaiman, B.T.H.T. Baharudin M.K.A M Arrifin, T.R. Vijayaram and S.Suraya, “Effect of Quartz-silicon dioxide particulate on tensile properties of aluminium alloy cast composites”, key engineering materials, volume 417-472, pp 727-732, 2011. (ISI, Refereed) 110 M.Sayuti, S.Sulaiman, B.T.H.T. Baharudin M.K.A M Arrifin, S.Suraya and E.Gholamreza, “Mechanical vibration technique for enhancing mechanical properties of particulate reinforced aluminium alloy matrix composite”, key engineering materials, volume 417-472, pp 721-726, 2011. (ISI, Refereed). 111
M.K.A M Arrifin, S.Sulaiman, B.T.H.T Baharudin, T.S. Hong and S. Sreenivasan, “Simulation of thermoset injection for bulk mulding compounds (BMC)”, key engineering materials, volume 417-472, pp 1101-1106, 2011 (ISI, Refereed).
112
Mohammad Shuaibu Abubakar, Desa Ahamd, Othman Jamarei, Sulaiman Samsuddin and Misron Norhisham, “Evaluation of a dual-purpose chemical applicator for paddy field”, American Journal of Applied Sciences 8 (4):362-367, 2011.
113
Akande, F.B., Ahmad, D., Shamsuddin, S., Jamarei, O.B. and Fashina, A.B. Mathematical modelling of the motion resistance ratio of the pneumatic and rigid bicycle wheels on deformable surfaces. Pertanika Journal of Science and Technology, 2011.
114 M.S.Abubakar, D. Ahmad and S.Sulaiman, “Development of a dual-purpose chemical applicator for paddy fields”, African Journal of Agricultural Research 2011. 115
M.S.Abubakar, D. Ahmad and S.Sulaiman, “Determining the spray droplet size spectrum from a dual-purpose rotary disc chemical applicator”, Int. Journal of Physical Science 2011. Page 27/62
116 M.S.Abubakar, D. Ahmad and S.Sulaiman, “Distribution pattern assessment of a dual-purpose rotary disc Chemical applicatior”, Transaction of ASABE 2011. 117
Daryoush Safarzadeh, Shamsuddin Sulaiman, Faieza Abdul Aziz, Desa Ahamd and Gholam Hossein Majzoobi, “An approach to determine effect of crane hook on payload sway”, Int. Journal of Mechanics and Applications 2011: 1(1):30-38.
118 D.Safarzadeh, S.Sulaiman, F.A.Aziz, D.Ahmad and G.H.Majzoobi, “The design process of a selfpropelled floor crane”, 2011 Journal of Terramechanics 48 (2), pp.157-168. 119 D. Safarzadeh, S.Sulaiman, F.A.Aziz, D.Ahmad and G.H.Majzoobi, “An investigation into the hook dynamics and effect of hook parameters on the sway angles in hydraulic cranes ”, Scientific Research and Essays Vol. 6(6), pp. 1303-1316, 18 March, 2011. 120 Taufik, S.Sulaiman, T.A.Abdullah adn Sivarao, “Design and Simulation on Compressor Metal Matrix Composite by Investment Casting”, Advanced Materials Research Vols. 264-265 (2011) pp 403-408. 121
T.R. Sahroni, S. Sulaiman, I. Romli, M.R. Salleh and H.A. Ariff, “Nonlinear Thermal Expansion Model for SiC/Al”, World Academy of Science, Engineering and Technology 78 2011.
122 Taufik, S.Sulaiman, T.A.Abdullah and Sivarao, “Design and Simulation on Cast Metal Matrix Composite by Investment Casting”, Advanced Materials Research Vols. 264-265 (2011) pp 323328. 123 Fatai B. AKANDE, Desa AHMAD, Othman JAMAREI, Samsuddin SULAIMAN, l Adepoju B. FASHINA and Hossein SHAMSABADI, “Investigation studies on the effects of tyre inflation pressure on the motion resistance of pneumatic bicycle wheels on hard and deformable surface”, Journal of Agricultural Machinery Science, 2011, 7(3), pp317-323. 124 F.B. Akande, D. Ahamad, S. Sulaiman, O. Jamarei and A.B. Fashina, “ Present state of research on narrow wheels: A prerequisite for traction studies on non-lug narrow wheels”, Leonardo Electronic Journal of Practices and Technologies, Vol 10, Issue 18, January 2011, pp 65-78. 125 Gholam Reza Esmaeilian, Shamsuddin Sulaiman, Napsiah Ismail, Maryam Hamedi, Megat Mohammad Hamdan Megat Ahmad, “ A tabu search approach for mixed-model parallel assembly line balancing problem (type II), Int. Journal of Industrial and Systems Engineering 2011 – Vol 8, No.4 pp407-431. 126 A. A. Faieza, S. Sulaiman and M.Y. Rosnah,“Product Structure Initialization, the Bottleneck of ERP Implementation in Customer Driven Environments: A Case Study”, Pertanika J. Sci. & Technol. 19 (1): 66 – 82 (2011) 127 M.Yusuf, K.Anuar, N.Ismail and S.Sulaiman, “ Influence of cutting parameters on surface roughness for wet and dry turning process”, 2011 Key Engineering Materials 471-472, pp. 233-238. 128 M.S.Abubakar, D.Ahmad, J.Othman and S.Sulaiman, “Mechanical properties of paddy soil in rel ation to high clearance vehicle mobility”, Australian Journal of Basic and Applied Sciences, 4(5): 2010, pp906-913 129 D. Safarzadeh, S.Sulaiman, F.A.Aziz, D.Ahmad and G.H.Majzoobi, “Computer-Aided FEM to Analyze the Composite Materials for Replacing with Steel in Crane Structure”, Int. Review of Mech. Engineering (IREME), Vol. 4 N.3, March 2010, pp233-237.
Page 28/62
130 F.B.Akande, D.Ahmad, O.B.Jamarei, S.Sulaiman, and A.B.Fashina, “ Empirical determination of the motion resistance of pneumatic bicycle wheels for on and off-road performance”, African Journal of Agricultural Research 5(23), pp. 3322-3332. 131
A. Azhar, S.Sulaiman, B.T.H.T. Baharudin M.K.A M Arrifin, and T.R. Vijayaram, “The effect of bentonite clay on green compression strength for tailing sands from old tin mines in Perak state, Malaysia for making green sand casting mould”, key engineering materials, volume 417472, pp 769-774, 2011 (ISI, Refereed).
132 B.T.H.T. Baharudin, S. Sulaiman, M.K.A. Ariffin, A.A. Faieza and S.M. Sapuan, “Coating Performance in High Speed Micro Machining of H13, Tool Steel”, Advanced Materials Research Vols. 83-86 pp 985-992, 2010 (ISI, Refereed) 133 N. Fatchurrohman and S. Sulaiman , “ The effect of particulate reinforcement addition to latent heat and solid fraction during solidification of titanium carbide particulates reinforced aluminium alloy matrix composite produced by vortex mixing – sand casting technique”, Int. Review of Mech. Engineering (IREME), Vol. 4 N.1, January 2010, pp12-17. 134 N. Fatchurrohman and S. Sulaiman, “Production and solidification analysis of Titanium carbide particulates reinforced aluminium alloy matrix composite by vortex mixing – sand casting technique”, ICASTOR Journal of Engineering Vol. 3, No. 1 (2010) ,pp 13-20. 135 M.S.Abubakar, D.Ahmad, J.Othman and S.Sulaiman, “Present State on Research on Development of a High Clearance vehicle for Paddy Fields”, Research Journal of Agriculture and Biological Sciences, 5(4): 2009, pp489-497. 136 M. Vasili, T.S. Hong, N.Ismail and S.Sulaiman,”Bead-sort algorithm for load shuffling in miniload ASRS”, Computers and Industrial Engineering, CIE 2009 . art. No 5223906, pp 1781-1786. 137 G.R.Esmaeilian, N.Ismail , S.Sulaiman, , M.M.H.MegatAhmad, & M.Hamedi, “Allocating and balancing of mixed model production through the parallel assembly lines”, 2009, European Journal of Scientific Research 31 (4), pp 616-631. 138 G.R.Esmaeilian, S.Sulaiman, N.Ismail, M.M.H.MegatAhmad, & M.Hamedi. “Application of MATLAB to Create Initial Solution for Tabu Search in Parallel Assembly Lines Balancing”. Int. Journal of Computer Science and Network Security, 8(10), 132-136. 139 Faieza Abdul Aziz, D.T.Pham, Shamsuddin Sulaiman, Napsiah Ismail, Mohd Khairol Anuar Ariffin, and B.T. Hang Tuah Baharudin, “Visual feedback and pseudo-haptic feedback improve manual lifting performance”, Journal of Technology, 49(D) Dec 2008: 157-171. 140 Shamsuddin Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F. Abdewi. Effects of Shape and Geometry on the Energy Absorption of Fiberglass Composite Tubes. World Journal of Engineering, 2008, 5(3): 474-475. 141 Napsiah Ismail, S.Sulaiman, Sai Hong Tang and M.R.Vasili, “A statistical travel time model for miniload automated storage and retrieval systems with open-rack structure”, In. J. IC-AI 2008: 715721. 142 A.A. Faieza, S. Sulaiman, Mohd Khairol Anuar Ariffin, and B.T. Hang Tuah Baharudin, “Virtual training enhances user performance”, ARCS 2008: 189-195. 143 M. Jolgaf, S.B. Sulaiman, M.K.A. Ariffin and A.A. Faieza, Closed Die Forging Geometrical Parameters Optimization for Al-MMC, American J. of Engineering and Applied Sciences, Vol1, pg 1-6, 2008 (EBSCO, WAD, ASA, DOAJ) 144 M Jolgaf, SB Sulaiman, MKA Ariffin, AA Faieza, Billet shape optimization for minimum forging Page 29/62
load, European Journal of Scientific Research 24 (3), 420-427, impact factor 0.736, 2008. 145 Faieza, A.A., Sulaiman, S., N. Ismail, Ariffin, M.K.A, B.T.H.T. Baharuddin, Visual Feedback and Pseudo-Haptic Feedback Improve Manual Lifting Performance, Jurnal Teknologi, volume 49, pg10, scopus 2008. 146 S. Sulaiman, M.K.Ariffin, “Design, Analysis and Simulation of Plastic Injection Moulding Product”, Int. Journal of materials and processing technology, (2002), pp.115-120. 147 S.Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F.Abdewi, “Effects of shape and geometry on the energy absorbtion of fibreglass composite tubes”, World Journal of Engineering 2008, 5(3): 474475. 148 G.R.Esmaeilian, M.M.H.Megat Ahmad, N.Ismail, S.Sulaiman and M.Hamedi, “Particular model for improving failure mode and effect analysis (FMEA) by using of overall equipment efficiency (OEE)”, Int. Journal of IEEE 2008, pp1458-1466. 149 M.Jolgaf, S.B.Sulaiman, M.K.A.Ariffin and A.A.Faieza, “Closed Die Forging Geometrical Parameters Optimization for Al-MMC”, American J. of Engineering and Applied Sciences 1 (1): 16, 2008. 150 M.Jolgaf, S.B.Sulaiman, M.K.A.Ariffin and A.A.Faieza, “Billet shape optimization for minimum forging load”, European Journal of Scientific Research, Vol 24 Issue 3 2008, pp420-427. 151
P. Matoorian, S.Sulaiman and M.M.H.M.Ahmad, “An experimental study for optimization of electrical discharge turning (EDT) process”, Int. Journal of Materials and Processing Technology 204 (2008) 350-356.
152 Elfetori F.Abdewi, Shamsudeen Sulaiman, A.M.S.Hamouda and E.Mehdi,”Quasi-static axial and lateral crushing of radial corrugated composite tubes”, Int. Journal of Thin-walled Structures, 46 (2008) 320-332. 153 S.Sulaiman, M.Sayuti and R.Samin,”Mechanical properties of the as-cast quartz particulate reinforced LM6 Alloy matrix composite”, Int. Journal of Materials and Processing Technology 201 (2008) 731-735. 154 S.M.Sapuan, S.S.S.Imihezri, S.Sulaiman, M.Hamdan and E.S.Zainudin, “Comparison of simulated and actual product of polymer composite automotive clutch pedal”, Int. Journal of Mechanical and Materials Engineering (IJMME), Vol 2 (2007) No 1, pp29-39. 155 A.M.S.Hamouda, S.Sulaiman, T.R.Vijayaram, M.Sayuti and M.H.M.Ahmad, “Procssing and characterisation of particulate reinforced aluminium silicon matrix composite”, Int Journal of Achievements in Materials and Manufacturing Engineering, Vol 25 Issue 2 December 2007, pp. 11-16. 156 S.H.Tang, Y.J.Tan, S.M.Sapuan, S. Sulaiman, N.Ismail and R. Samin, “The use of Taguchi method in the design of plastic injection mould for reducing warpage”, Int. Journal of Materials and Processing Technology , Vol 182 (2007), pp 418-426. 157 K.N.M.Tohit, S.Sulaiman, N.Ismail, M.Y.Ismail and S.M.Sapuan, “Improvement of accuracy level using process failure mode and effect analysis and control plan techniques for automotive fender shield assembly”, Journal of Scientific and Industrial Research Vol. 66. October 2007, pp. 811-818. 158 Thoguluva Raghavan Vijayaram, Shamsuddin Sulaiman, Megat Mohamad Hamdan Megat Ahmad and Abdel Magid Salem Hamouda, “Processing, Properties and Metallographic Studies of Combined Tungsten Carbide and Alluminium Silicate Particulates Reinforced Aluminium-11.8% Silicon Alloy Matrix Hybrid Composite Castings”, Indian Foundry Journal, Vol. 53 No. 2 February 2007, pp33-41. Page 30/62
159 E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi,’Bahaviour of axially and laterally crushed corrugated composite tubes’, Int. Journal of Mechanical Engineering Science, JMES435, July 2006. 160 Thoguluva Raghavan Vijayaram, Mohamad Sayuti, Shamsuddin Sulaiman and Abdel Magid Salem Hamouda, “Mechanical properties and characterisation studies on the ascast quartz particulate reinforced aluminium- 11% silicon alloy matrix composites”, Journal of Alloys and Compounds Elsevier, UK. 161 E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi, ‘Quasi-Static axial and lateral crushing of radial corrugated composite tubes’, Int. Journal of Thin-Walled Structure, April 2006 162 T.R. Vijayaram, S.Sulaiman, A.M.S.Hamouda, and M.H.M.Ahmad, “Fabrication of fiber reinforced metal matrix composites by squeeze casting technology”, Int. Journal of Materials and Processing Technology , 178 (2006) 34-38. 163 E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi, “Effect of geometry on the crushing behaviour of laminated corrugated composite tubes”, Int. Journal of Materials and Processing Technology , 172(2006) 394-399. 164 T.R. Vijayaram, S.Sulaiman, A.M.S.Hamouda, and M.H.M.Ahmad, “Numerical simulation of casting solidification in permanent metallic moulds”, Int. Journal of Materials and Processing Technology , 178(2006) 29-33. 165 T.R. Vijayaram, S.Sulaiman, A.M.S.Hamouda, and M.H.M.Ahmad, “Foundry quality control aspects and prospects to reduce scrap rework and rejection in metal casting manufacturing industries”, Int. Journal of Materials and Processing Technology , Int. Journal of Material Processing Technology, 178 (2006), pp39-43. 166 T.R. Vijayaram and S.Sulaiman, “Quantification and analysis of surface roughness parameters on selected engineering components by mechanical measurement methodology”, Int. Journal of Instrumentation System and Automation (ISA) May 2005. 167 E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi, “Effect of shape and geometry on the energy absorption capability of fiberglass composite tubes”, Int. Journal of Composites Science and Technology, August 2005. 168 Hafizal Abu Bakar, Shamsuddin Sulaiman, S.M. Sapuan Salit and T.R. Vijayaram, “Redesigning and construction of three-component balance for low speed wind tunnel”, Asean Journal of Science and Technology for Development July 2005. 169 T.R. Vijayaram, S.Sulaiman, A.M.S.Hamouda, and M.H.M.Ahmad, “Technological advances in squeeze casting technique for processing light metals, alloys and metal matrix composites”, La Metallurgia Italiana Journal, May 2005. 170 C.F.Tan, N. Ismail, S.V.Wong, S.Sulaiman and M.R.Osman, “Development of hole recognition system from step file”, AJSTD Vol. 22 Issue 3, 2005, pp. 285-295. 171
C.K.Ooi, M.M.H.M.Ahmad, S.Sulaiman, “Proposing a non-traditional ordering methodology in achieving optimal flexibility with minimal inventory risk”, Asia Pacific Journal of Marketing and Logistics, Vol. 17, 1 2005, pp 12-18.
172 T.R. Vijayaram and S.Sulaiman, “An experimental investigation to design and from a sand control chart to reduce defects in castings produced by green sand moulding process”, La Metallurgia Italiana Journal, May 2005.
Page 31/62
173 H.B. Lee, S.M.Sapuan, S.Sulaiman and M.H.M.Ahmad, “Design process and rapid prototyping of fibre reinforced composite pedal box”, Int. Journal of Sudan Engineering Society, August 2005, Vol 51 no 44, pp23-32. 174 S.H.Tang, Y.M.Kong, S.M.Sapuan, R.Samin, S.Sulaiman, “Design and thermal analysis of plastic injection moulding”, Int. Journal of Materials and Processing Technology , 171 (2006) pp259-267. 175 S.S.S.Imihezri, S.M.Sapuan, S.Sulaiman, M.M.Hamdan, E.S. Zainudin, M.R.Osman and M.Z.A.Rahman, “Mould flow and component design analysis of polymeric based composite automotive clutch pedals”, Int. Journal of Materials and Processing Technology 171 (2006) 358-365. 176 Y.P.Lim, S. Sulaiman, A.M.Hamouda and M.M.H.M.Ahmad,”Grain refinement of LM6 Al-Si alloy sand castings to enhance mechanical properties”, Int. Journal of Materials and Processing Technology,Vol 162-163 (2005) pp435-441. 177 S.S.S. Imihezri, S.M.Sapuan, S.Sulaiman and M.Hamdan, “Simulation of fill time injection moulding process for composite pedals using mould flow analysis software”, Mech. Eng. Res. Journal, Vol. 5 (2005), pp 7-10. 178 S.S.S. Imihezri, S.M.Sapuan, S.Sulaiman, M.M.H.M.Ahmad, M.R.Osman and E.S.Zainudin, ‘A simulation work to study the effect of increasing number of gates on air traps and weld line formation in injection moulded composite clutch pedal’, Journal of Applied Technology, vol.2 No. 2 October 2004 , pp 105-109. 179 S.Sulaiman, Y.P.Lim, T.R. Vijayaram, A.M.S. Hamouda and M.M.Hamdan, “An Experimental Investigation on Alumunium-Silicon Alloy Sand Castings to Study the Microstructure-Property Correlation Influenced by Solidifiation Rate”, Int. Journal of Materials and Processing Technology, MSH1750, 2004,pp1-13. 180 S.S.S.Imihezri, S.M.Sapuan, M.M.H.M.Ahmad, S.Sulaiman, “Design of Composite Clutch Pedal”, Int. Journal Sudan Engineering Society, Issue 42 Vol 50, July 2004, pp15-23. 181 S.H.Tang, S.L.Wong, S.Sulaiman, P.Young and M.S.J. Hashmi, “Computer-Aided Design in Subtractive and Additive Prototyping”, Pertanika J. Sci. & Technol. Supplement 12(2) 2004 pp127137. 182 S.Sulaiman, A.M.S. Hamouda, “Modelling and Experimental Investigation of Solidification Process in Sand Casting”, Int. Journal of Materials and Processing Technology, 155-156 (2004), pp1723-1726. 183 C.F. Tan, N.Ismail, M.R.Osman, S.V Wong and S.Sulaiman,” The Development of Hole Recognition System for Machined parts”, Pertanika J. Sci. & Technol. Supplement 12(1) 2004 pp1-8. 184 M.Y.Rosnah, M.M.H.Megat Ahmad, S.Sulaiman and Z.Mohamad, “Implementation of ComputerBased Technologies for the Small and Medium Scale Industries of Malaysia”, Pertanika J. Sci. & Technol. Supplement 12(1) 2004 pp41-50. 185 E.S. Zainudin, S.M. Sapuan, S. Sulaiman and M.M.H.M. Ahmad, “Comparison of computational and experimental results on the fibre orientation distribution of short fibre reinforced injection moulded thermoplastic composites, Ciencia & Tecnologia dos Materiais, 16, no. 4, pp. 57-60, 2004 186 Tang Sai Hong, Wong Su Luan, Paul Young, Shamsuddin Sulaiman and M.S.J.Hashmi, “Hardware design and interfacing of a robot assisted subtractive prototyping system”, Journal Teknologi, 40(A)Jun 2004: 33-50.
Page 32/62
187 E.S.Zainudin, S.M.Sapuan, S.Sulaiman and M.M.H.M.Ahmad, “To explore and confirm the validated experimental results in short fibre reinforced injection moulded polycarbonate composite disc using MPI technique”, Int. Journal of Industrial Technology Vol13 No.2,2004, pp57-63. 188 C.T. Wong, S.Sulaiman, N. Ismail and A.M.S Hamouda, “Design and Simulation of Plastic Injection Moulding Process”, Pertanika J. Sci. & Technol. Supplement 12(2) 2004 pp85-99. 189 Ishak Aris, A.K.M. Parves Iqbal, A.R.Ramli and S.Shamsuddin, “Design and Development of a programmable painting robot for houses and buildings”, Journal Teknologi, UTM, No. 42(A), Jun 2005, pp27-48. 190 N.Ismail, M.R.Osman,C.F.Tan, S.V.Wong and S.Sulaiman, “Extraction of cylindrical features from neutral data format for CAD/CAM integration”, Int. Journal of Engineering and Technology, Vol. 1, no. 2, 2004, pp.206-212. 191 Shamsuddin Sulaiman and Lim Ying Pio, “Validation of MAGMAsoft simulation of sand casting process”, Int. Jounal of IEM, Vol. 65 No.1/2, September/December 2004, pp29-38. 192 S.S.S.Imihezri, S.M.Sapuan, M.M.H.M.Ahmad, S.Sulaiman, “A study on comparison of ‘V’ and ‘X’ ribbing in composite pedal using mold flow analysis software”, Int. Journal of Material and Design, Elsevier, 2004, pp78-84. 193 Wong Choon Tat, Shamsuddin Sulaiman, Napsiah Ismail and A.M.S. Hamouda, “Design and Simulation of Plastic Injection Moulding Process, Int. Journal of Plastic Molding Technology 2003, pp.16-20. 194 L.H.Boon, K.A.Abbas, S.M.Sapuan, M.M.H.Megat Ahmad, S.Sulaiman,”A Development and Comparative Study of Two Rapid Prototyping Processes of An Automotive Composite Pedal Box System, Int. Journal of Advanced Manufacturing Technology, Vol 5,2003, pp5-8. 195 M.Y.Rosnah, M.M.H.M. Ahmad, S.Sulaiman and Z.Mohamad, “Increasing competitiveness through advanced manufacturing technologies”, Int. J. Manufacturing Technology and Management, Vol. 5, No. 4, 2003, pp. 371-379. 196 S.Sulaiman, S.H.Tang and M.S.J. Hashmi, “Rapid Prototyping System by Precision Robotic Manipulator”, Journal of Intelligent Manufacturing, (2003). pp56-62. 197 S. Sulaiman, M.K.Ariffin, “Design, Analysis and Simulation of Plastic Injection Moulding Product”, Int. Journal of Plastic Molding Technology, (2003) 198 E.S. Zainudin, S.M. Sapuan, S.Sulaiman and M.M.H.M.Ahmad, “Comparison of computational and experimental results on the fibre orientation distribution of short fibre reinforced injection moulded thermoplastic composites”, Journal of Plastics Rubber and Composites, (2004), pp68-73. 199 L.H.Boon, K.A.Abbas, S.M.Sapuan, M.M.H.Megat Ahmad, S.Sulaiman and S.I.S.Shahruddin, “A development and comparative study of two rapid prototyping processes of an automotive pedal box system”, Int. Journal of Ciencia & Technologia dos Materials, 15, no. 1-2, 2003, pp 5-8. 200 E.S. Zainudin, S.M. Sapuan, S.Sulaiman and M.M.H.M.Ahmad, “A numerical investigation of fibre orientation in injection moulded thermoplastic composites” Advances in Material Processing Journal, Institute of Materials Malaysia, ISBN983-2781-00-0, 2003, pp 1-33. 201 S.Sulaiman, A.M.S. Hamouda, “Solidification Analysis of Sand Casting Process”, Journal of Materials Processing Technology, Casting Technology Special Volume, (2002) pp. 46-52.
Page 33/62
202 E.S. Zainudin, S.M. Sapuan, S.Sulaiman, M.M.H.M.Ahmad and M. Hamedullah, “A comparison of computational simulation and experimental results in short fibre reinforced injection molded polycarbonate composites”, Journal of Materials Processing Technology (2002) pp125-130. 203 A.M.S.Hamouda, S.Sulaiman, C.K. Lau “Finite Element Thermal Analysis on the effect of workpiece geometry on the quenching of ST50 steel”, Int. Journal of Material Processing Technology, Vol 119(2001) pp. 354-360. 204 E.S. Zainudin, S.M. Sapuan, S.Sulaiman, M.M.H.M.Ahmad “Fiber Orientation of Short Fiber Reinforced Injection Molded Thermoplastic Composites: A Review”, Int. Journal of Plastic Molding Technology, March 2002, Vol 6, No. 1. Pp.1-10. 205 S.Sulaiman, A.M.S.Hamouda, D.T.Gethin, “An experimental investigation of metal filling system in diecasting process” , Int. Journal of Material Processing Technology, Vol 119 Issue 1 (Dec 2001) pp 268-272. 206 S.Sulaiman, A.M.S.Hamouda, “Modelling of the thermal history of sand casting process”, Int. Journal of Material Processing Technology, Vol 113 Issue 1(June 2001) 245-250. 207 S. Sulaiman, A.M.S. Hamouda, S.Abedin, “Three-Dimensional Finite Element Thermal Analysis of Die/Mould for Casting Industry Applications”, Int. Journal of Material Processing Technology, August 2000. 208 M.Jolgaf, A.M.S. Hamouda, S.Sulaiman , M.M.Hamdan, “Development of CAD/CAM system for closed die forging Process”, Vol 138, Int. Journal of Material Processing Technology, pp436-442. 209 M.Jolgaf, A.M.S. Hamouda, S.Sulaiman, M.M.Hamdan,”FE analysis of influence of unequal friction, metal filling and residual stresses in closed die forging processes”, Journal of Mechanics and Materials in Design, Univ. of Toronto, May 2000, p158. 210 A.M.S. Hamouda, S.Sulaiman, M.M.Hamdan,”Coupled thermo-mechanical finite element analysis of high speed closed-die forging process”, Journal of Mechanics and Materials in Design, Univ. of Toronto, May 2000, p201. 211
S. Sulaiman, A.M.S.Hamouda, S.Abedin, M.R.Osman, “Simulation of metal Filling Progress During the Casting Process”, Int. Journal of Material Processing Technology 100 (2000) 224-229.
212 S. Sulaiman, A.M.S. Hamouda, S. Abedin,” Development of Computer Aided Design System for Casting Process”, Int. Journal of Material Processing Technology, March 1999. 213 Shamsuddin Sulaiman, Tham Chee Keen, “Flow analysis along runner and gating system of casting process”, Int. Journal of Materials Processing Technology, Vol 63 Jan 1997, pp.690-695. 214 S.B.Sulaiman, D.T.Gethin, “Modelling and experimental investigation of heating and shaking subsystem for an oil analysis facility”, Asean Journal of Science and Technology for Development 14(2)(1997) pp 11-26. 215 A.M.S.Hamouda, S.Sulaiman and M.S.J. Hashmi, “Fast Upsetting of circular cylinders of Aluminium Metal Matrix Composites: Experimental Results and Numerical Analysis”, Journal of Materials Processing Tech. Vol PRO060/1-4, pp.723-727. 216 Shamsuddin Sulaiman, D.T. Gethin, “A Network Technique For Analysis Of Thermal Transient Casting Process”, Pertanika Journal of Science & Technology Vol.4 No.2 1996 pp.251-261.
Page 34/62
217 Shamsuddin Sulaiman, D.T.Gethin, “An experimental investigation into the metal filling system of pressure diecasting process”, Journal of Institution of Engineers Malaysia (IEM) March 1996 pp.913. 218 Shamsuddin Sulaiman, D.T. Gethin, “Expert System for the Casting Process Selection and Analysis Procedure”, Institution of Engineers Malaysia (IEM) Bulletin April 1995 pp.11-18. 219 Shamsuddin Sulaiman, “Casting Thermal Simulation”, Journal Institution of Engineers Malaysia (IEM) June 1994 (54), pp5-16. 220 S.B. Sulaiman, D.T. Gethin, “A Network Technique for metal flow analysis in the filling system of pressure diecasting and its experimental verification on a cold chamber machine”, Journal Instn Mech Engrs Vol 206 IMechE 1992, pp 261-275. 221
Conference Proceedings 1
J. Nemati, S.Sulaiman, G.H. Majzoobi, B.T.H.T. Baharudin, & Hanim, M. A. A. (2013). Effect of Equal Channel Angular Extrusion on fatigue life of pure copper. Paper presented at the The 3rd International Conference on Advanced Materials Research(ICAMR 2013), Dubai, UAE.
2
N. Kakahy, D.Ahmad, MD. Akhir, S.Sulaiman and IShak.A. “Pulverizationof sweet potato vine at different mower speed”, International Conference on Mechanical Engineering Research (ICMER 2013), Kuantan Pahang Malaysia 1-3 July 2013.
3
J.Nemati, S.Sulaiman, G.H.Majzoobi, B.T.H.T. Baharudin, & Hanim, M. A. A. (2013). Development of Microstructure and Fracture Toughness of AL-6063 alloy Using Equal Channel Angular Extrusion Paper presented at the International Conference on Advances in Mechanical and Manufacturing Engineering (ICAM2E) Kuala Lumpur, Malaysia.
4
J.Nemati, S.Sulaiman, B.T.H.T. Baharudin, G.H.Majzoobi, & M.A.Azmah Hanim. (2014). Finite Element Study of Deformation Behaviour of Al- 6063 Alloy Developed by Equal Channel Angular Extrusion. Paper presented at the International conference on engineering and innovate materials (ICEIM), 2014Kuala Lumpur, Malaysia.
5
S.Sulaiman, J. Nemati, B.T.H.T. Baharudin, G.H.Majzoobi,&Hanim, M. A. A. Experimental study of impact strength of Al-6063 alloy processed by Equal Channel Angular Extrusion (ECAE) Paper presented at the International Conference on Key Engineering Materials (ICKEM 2014), Bali, Indonesia.
6
J.Nemati, S.Sulaiman, B.T.H.T. Baharudin, M.A.Azmah Hanim,&G.H.Majzoobi. (2013). Microhardness characteristics of Al-6063 alloy processed by Equal Channel Angular Extrusion. Paper presented at the International Conference on Advances in Mechanical and Manufacturing Engineering (ICAM2E) Kuala Lumpur, Malaysia.
7
S.Sulaiman, A.Roshan and S.Borazjani, “Effect of cutting parameters on Tool-Chip interface temperature in an orthogonal turning process”, 1st International Manufacturing Engineering Conference (IMEC2013), Kuantan Pahang Malaysia 1-3 July 2013. S.Sulaiman and N. Abidin Ismail, “Analysis of failure in manufacturing machinery”, International Conference on Mechanical Engineering Research (ICMER 2013), Kuantan Pahang Malaysia 1-3 July 2013.
8
9
S.Sulaiman, A.Roshan and M.K.A. Ariffin, “Finite Element modelling of the effect of tool rake
Page 35/62
angle on tool temperature and cutting force during high speed machining of AISI4340 Steel”, Conference on Mechanical Engineering Research (ICMER 2013), Kuantan Pahang Malaysia 1-3 July 2013. 10
S.Sulaiman, S. Borazjani and S.H.Tang, “ Finit e Element anslysis of filament-wound composite pressure vessel under internal stress”, Conference on Mechanical Engineering Research (ICMER 2013), Kuantan Pahang Malaysia 1-3 July 2013.
11
Suraya Sulaiman, Shamsuddin Sulaiman, Najmiah Jaafar and Imrah Yusuff, “Studies of tensile propertiesof Titanium Carbide (TiC) Particulate composites”, 1st International Manufacturing Engineering Conference (IMEC2013), Kuantan Pahang 1-3 July 2013.
12
N. Fathurrohman, S.Sulaiman, S.M.Sapuan, M.K.A.Ariffin and B.T.H.T.Baharuddin, “New technique for comceptual selection of manufacturing process and material, case study: metal matrix composite component”, Int. Conference of Quality in Research (QIR 2013), Yogyakarta 25-28 July 2013.
13
Suraya Sulaiman, Shamsuddin Sulaiman, Munira Ali and Fazilah Aziz, “The effect of TiC particulates on the microstructure and mechanical properties of Aluminium based metal matrix composites”, 1st International Manufacturing Engineering Conference (IMEC2013), Kuantan Pahang Malaysia 1-3 July 2013.
14
M.Yusuf, M.K.A. Ariffin, N.Ismail and S.Sulaiman, “Experimental investigation on surface roughness and tool wear in dry machining of TiC reinforced aluminium LM6 composite”, AMPT2012, 23-26 Sept. Wollongong, Australia.
15
M.Yusuf, M.K.A. Ariffin, N.Ismail and S.Sulaiman, “Chip formation and surface roughness in dry machining of aluminium alloys”, Int. Conference on Mechatronic and applied Mechanics 2011, Guangzhou, 27-28th Dec.
16
M.Yusuf, M.K.A. Ariffin, N.Ismail and S.Sulaiman, “Optimization of cutting parameters on turning process based on surface roughness using response surface methodology”, Int. Conf. on Applied Mechanics 2011, Shenzhen, China 18-10th November.
17
M.Yusuf, M.K.A. Ariffin, N.Ismail and S.Sulaiman, “Influence of cutting parameter on surgace roughness for wet and dry turning process”, Int. Conf. on Composite Science and Tech 2011, Kuala Lmpur, Malaysia, 22-24th March.
18
M.Sayuti, S.Sulaiman, B.T.H.T.Baharudin, M.K.A.Ariffin, S.Suraya and T.R.Vijayaram, ”Effect of Mould Vibration on Mechanical Properties of Particulate Reinforced Aluminium Alloy Matrix Composite”, Int. Conf. on AMPT2011, 13-16 July 2011, Istanbul Turkey.
19
Sayuti, M., Sulaiman, S., Vijayaram, T. R Baharudin, B. T. H. T., Ariffin, M. K. A.M. “The Influence of Mechanical Vibration Moulding Process on Thermal Conductivity and Diffusivity of Al-TiC Particulate Reinforced Composites.” Paper presented at the International Conference on advanced design and Manufacturing Engineering (ICADME), September 1618, 2011, Guangzhou, China.
20
Sayuti, M, Sulaiman, S, B.T.H.T. Baharudin, Arifin, M.K.A, Vijayaram, T.R and Suraya, S.. Effect of Quartz-Silicon Dioxide Particulate on Tensile Properties of Aluminium Alloy cast Composites. Paper presented at Eighth International Conference On Composite Science And Technology (ICCST 2011), Novotel Hotel Kuala Lumpur, Malaysia, March 22-24, 2011.
21
Sayuti, M, Sulaiman,S, B.T.H.T. Baharudin, Arifin, M.K.A, Suraya, S and Gholamreza Esmaeilian. Mechanical Vibration Technique for Enhancing Mechanical Properties of Particulate Reinforced Aluminium Alloy Matrix Composite. Paper presented at Eighth International Conference On Composite Science And Technology (ICCST8 2011), Novotel Hotel Kuala Page 36/62
Lumpur, Malaysia, March 22-24, 2011. 22
Suraya. S, Sulaiman. S , Ariffin. M.K.A and Sayuti.M. Computer Simulation and Experimental Investigation of Solidification Casting Process. Paper presented at Eighth International Conference On Composite Science And Technology (ICCST8 2011), Novotel Hotel Kuala Lumpur, Malaysia, March 22-24, 2011.
23
Sayuti, M., Sulaiman, S., Baharudin, B. T. H. T., Ariffin, M. K. A. M., Vijayaram, T. R., & Suraya, S. (2011). Influence of Mechanical Vibration Moulding Process on the Tensile Properties of TiC Reinforced LM6 Alloy Composite Castings. Paper presented at International Conference on Mechanical Materials and Manufacturing Engineering (ICMMME 2011) in June 20-22, 2011, Nanchang, China.
24
Sayuti, M., Sulaiman, S., Vijayaram, T. R Baharudin, B. T. H. T., Ariffin, M. K. A.M. Manufacturing of TiC Particulate Reinforced Al-11.8%Si Matrix Composites by Mechanical Vibration Mould. Paper Accepted for presented at the 2nd International Symposium on Mechanical Science and Technology (ISMST 2011), December 20-21, 2011, Guangzhou, China.
25
A.Hashemi, D.Ahmad, J.Othman and S.Sulaiman, “Design, development and performance of a disk plow combined with rotary blades”, Proceeding of Int. Conf. in Mechanical Engineering Research (ICMER) 2011, 5-7 Dec 2011, Kuantan, Pahang Malaysia, pp11-18.
26
Amer N.N.Kakahy, D.Ahmad, MD Akhir and S.Shamsuddin “Design, development and performance of an integrated slasher for sweet potato harvester: A review”, Proceeding of Int. Conf. in Mechanical Engineering Research (ICMER) 2011, 5-7 Dec 2011, Kuantan, Pahang Malaysia, pp37-43.
27
Akande, F.B., Ahmad, D., Jamarei, O.B., Shamsuddin, S. and Fashina, A.B. Investigative Studies on the effects of tyre Inflation Pressure on the Motion Resistance of Pneumatic Bicycle Wheels on Hard and Deformable Surfaces. 11th International Congress on Mechanization and Energy in Agriculture Namil Kemal University, Turkey. 2011.
28
M.Sayuti, S.Sulaiman, B.T.H.T.Baharudin, M.K.A.Ariffin, S.Suraya and T.R.Vijayaram,” Mechanical properties of particulate reinforced Alulminium alloy matrix composite”, Int. Conf. on AMPT 2010, Paris 22-24 Oct 2010.
29
Sayuti, M., Suraya, S., Sulaiman, S., M.K.H, Ariffin., and Baharudin, B. T. H. Processing and Characterisation of Particulate Reinforced Aluminium-11,8% Silicon Matrix Composite. Paper presented at Aceh Development International Conference (ADIC2010), Kuala Lumpur, March 26 to 28, 2010.
30
Sayuti, M., Suraya, S., Sulaiman, S., Vijayaram, T. R., M.K.H, Ariffin., and Baharudin, B. T. H. T. Thermal Investigation of Aluminium - 11.8% Silicon (LM6) Reinforced SiO2-Particles. Paper presented at the International Conference on Advanced in Materials and Processing Technologies (AMPT2009), The Legend Hotel, Kuala Lumpur Malaysia, 26-29 October 2009.
31
N.Fatchurrohman, S.Sulaiman, M.K.A ariffin and A.A Faieza, “Solidification properties of metal matrix composites: Aluminium alloy reinforced with titanium carbide particules fabricated by sand casting method”, WEC 2010, 2-5 August 2010, Kuching Sarawak.
32
N.Fatchurrohman, S.Sulaiman, M.K.A ariffin and A.A Faieza, “Solidification properties of metal matrix composites: Latent heat and solid fraction aspects”, WEC 2010, 2-5 August 2010, Kuching Sarawak.
33
Sayuti. M, S. Sulaiman, Vijayaram T. R., B.T.H.T Baharudin, Ariffin M.K.A and Suraya S., “Manufacturing and mechanical properties of titanium carbide particulate reinforced Page 37/62
aluminium – 11.8% silicon alloy matrix composite castings”, WEC2010, 2-5 August 2010, Kuching Sarawak. 34
Suraya S, M. Sayuti M, Sulaiman S, and Ariffin. M.K.A. “Tensile properties of titanium carbide particulates composites” , ENCON 2010 14-15 April 2010, Kuching Serawak.
35
Sayuti, M., Suraya, S., Sulaiman, S., Vijayaram, T. R., M.K.H, Ariffin., and Baharudin, B. T. H. T. Thermal Investigation of Aluminium - 11.8% Silicon (LM6) Reinforced SiO2-Particles. Paper presented at the International Conference on Advanced in Materials and Processing Technologies (AMPT2009), The Legend Hotel, Kuala Lumpur Malaysia, 26-29 October 2009.
36
Sayuti, M., Sulaiman, S., Vijayaram, T. R., Baharudin, B. T. H. T., Ariffin, M. K. H., and Suraya, S. Manufacturing and Mechanical Properties of Titanium Carbide Particulate Reinforced Aluminium-11.8% Silicon Alloy Matrix Composite Castings. Paper presented at the World engineering Congress 2010, 2010, Kuching, Sarawak Malaysia, 2-5 August 2010.
37
Suraya, S., Sulaiman, S., Sayuti, M., Ariffin, M. K. H., and Baharudin, B. T. H. T. The Effect of TiC Microstructure and Tensile Properties of Aluminium-11.8% Silicon Alloy. Paper presented at the World Engineering Congress 2010, Kucing, Sarawak, 2-5 August 2010.
38
M.S.Abubakar, D.Ahmad, S.Shamsuddin and M.Norhisham, “Conceptual design of a remotecontrolled chemical applicator for flooded paddy fields”, Int. Conf on Sustainable Mobility (ICSM) 2010, 1-3 December, Kuala Lumpur.
39
M.S.Abubakar, D.Ahmad, O.Jamarei, S.Samsuddin and M.Norhisham,”Evaluation of a dualpurpose chemical applicator for paddy fields”, Int. Conference on Mechatronics (ICOM) 2011, 1719 May, 2011 Kuala Lumpur.
40
Akande, F.B., Ahmad, D., Jamarei, O.B, S. Shamsuddin, S., and Fashina, A.B. (2009). Development of a rolling resistance test rig. Poster presented at the National Conference on Agriculture and food Mechanisation, Renaissance Hotel Melaka, Malaysia. 23-25 June, 2009. Pp 109-112.
41
A.Azhar and S.Shamsuddin, “Preliminary study on tailing sand from ex-tin mine sites in Peninsular Malaysia for use as foundry sand: grain size distribution and average grain size”, Int. Conf. On AMPT 2009, Kuala Lumpur, 26-29th October 2009.
42
M.Sayuti, Suraya S, S. Sulaiman, T.R Vijayaran, M.K.H. Ariffin and B.T.H.T Baharudin, “Thermal investigation of Aluminium – 11.8% silicon (LM6) Reinforced Sio2-Particles”’ AMPT 2009, 26th - 29th October, 2009, Gombak, Selangor, Malaysia.
43
N. Fatchurrohman, S.Sulaiman, M.K.A Ariffin and A.A. Faieza, “The effect of particulate reinforcement addition to latent heat and solid fraction during solidification of titanium carbide particulates reinforced aluminium alloy matrix composite produced by sand casting”, ATCI, 3-5 November 2009, PWTC Kuala Lumpur.
44
S.Suraya, S. Sulaiman, S.H. Sheikh Md. Fadzullah, M.sayuti and M.K.A Ariffin, “Mechanical anisotropy ptimiza of fused deposition modeling”’ NSPM 2009, 14-16 December 2009, Bangi Selangor.
45
Akande, F.B., Ahmad, D., Hadi, S. Samsuddin, S., and Fashina, A.B. (2008): Status of research on narrow wheels. Paper presented at the 25th anniversary of the Confederation of the Scientific and Technological Associations in Malaysia (COSTAM), Malaysian Science and Technology Conference, KLCC, Malaysia. MSTC 2008.
46
S.Sulaiman, M.K.A.Ariffin, A.A.Faieza, B.T.Tuah and N.Fachurrohman, Optimisation and thermal analysis of casting design”, Int. Conf. On AMPT 2008, Manama Bahrain, 2-5 November 2008, Page 38/62
pp139. 47
B.T.H.T.Baharudin, S.Sulaiman, M.K.A.Ariffin, A.A.Faieza, and S.M.Sapuan, “Coating performance in high speed micro machining of H13 tool steel”, Int. Conf. On AMPT 2008, Manama Bahrain, 2-5 November 2008, pp274.
48
M. Vasili, T.S. Hong, N.Ismail and S.Sulaiman, “A statistical travel time model for miniload automated storage and retrieval system with open-rack structure”, Proceedings of 2008 Int. Con. On Artificial Intelligence ICAI 2008 and Proceedings of the 2008 Int. Con. On Machine Learning: Models, Technologies and Application, pp 715-721.
49
M.K.A.Ariffin, A.A.Faieza, N.Ismail, B.T.H.T.Baharudin and S.Sulaiman, “Integration of finite element analysis and MATLAB for genetic algorithm optimisation”, Int. Conf. On AMPT 2008, Manama Bahrain, 2-5 November 2008, pp199.
50
Gholamreza Esmaeilian, M.M.H.Megat Ahmad, N.Ismail, S.Sulaiman and M.Hamedi, “Particular model for improving failure mode and effect analysis (FMEA) by using overall equipment afficeincy (OEE)”, Proceedings – International Symposium on Infromation Technology 2008, ITSim 4, art. No. 4631974.
51
Gholamreza Esmaeilian, M.M.H.Megat Ahmad, N.Ismail, S.Sulaiman and M.Hamedi, “Heuristic model for improving failure mode and effect analysis (FMEA) by using of overall equipment efficiency (OEE)”, 3rd International Symposium on Information Technology Kuala Lumpur 2629 August 2008.
52
Shahraki, M. R., Ahmad, M. M. H. b. M., N.Ismail, S.Sulaiman, & Esmaeilian, G. R. (2008). Optimal Lot Size of EPQ Model Considering Imperfect and Defective Products. International Conference on Mechanical & Manufacturing Engineering (ICME2008).
53
S.Sulaiman, Elfetori F. Abdewi, M.K.A.Ariffin and N.Fatchurrohman, “Crushing behaviour of cylindrical and radial corrugated composite tubes”, Proceeding of iC2MS, Melaka, 5-7 August 2008.
54
S.Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F.Abdewi, “Effects of shape and geometry on the energy absorbtion of fibreglass composite tubes”, Proceeding of int. Conference ICCE-16, Kunming China 21-25 July 2008,pp663-664.
55
A.A. Faieza, S. Sulaiman, M.K.A. Ariffin, B.T.H.T. Baharuddin, “Virtual Training Enhances User Performance” ARCS 2008, 7-10 July 2008, Orlando, FL, USA.
56
Ariffin, M. K. A.; Badakhshian, M.; Sulaiman, S. B.; Faeiza, A. A. , “Automated Guided Vehicles Scheduling Optimization by Fuzzy Genetic Algorithm” The 12th World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI, 29 jun – 2 july 2008, Orlando, Florida, USA.
57
B.T.H.T. Baharudin, S. Sulaiman, M.K.A. Ariffin and A.A. Faieza, “Coating Performance in High Speed Machining”, AMPT 2008, 2 -5 November 2008 Manama, Bahrain.
58
M.Badakhshian, S. B. Sulaiman, M. K. A. Ariffin, “Performance Optimization of Automated Guided Vehicles using Fuzzy Genetic Algorithm”’ International Conference on Mechanical and Manufacturing Engineering, ICME 2008, 21-23 May 2008, Johor Bahru Malaysia.
59
M.K.A.Ariffin, A.A.Faieza N.Ismail, B.T.H.T Baharudin and S. Sulaiman. “Intergration of finite element analysis and matlab for genetic alagorithm optimization”, AMPT 2008, 2 -5 November 2008, Manama Bahrain.
60
Mostafa badakshian, shamsuddin sulaiman, Mohd khairol anuar mohd Ariffin, “Fuzzy genetic algorithm model for optimization of automated guided vehicle scheduling”, 38th Page 39/62
Conference on Computer and Industrial Engineering (CIE38), 31 October – 2 November 2008, Beijing, China. 61
S. Sulaiman, Elfetori F. Abdewi, M.K.A.Ariffin and A.A.Faieza, “Effects of shape and geometry on the energy absorption of fiberglass composite tubes”, International Community for Composites Engineering (ICCE) 16, 20-26 July 2008, Kunming China.
62
S.Sulaiman, M.Sayuti and R.Samin “Mechanical properties of the as-cast quartz particulate reinforced LM6 alloy matrix composites”, Proceeding of 10th Int. Conf. on Advances in Materials and Processing Technologies AMPT, Korea, 8th – 11th October 2007, pp1733-1742.
63
Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2007). Assembly Line and Balancing Assembly Line and Effect in Supply Chain Management. International Conference In Supply Chain Management, 118-127.
64
Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2007). Using Human-oriented and Process-oriented Strategy for improving implementation of TPM in Food Industries. 4th International Conference In Maintenance Management, Iran.
65
S.Sulaiman, elfetori abdewi, M.K.A. Ariffin and N. Fatchurrohman, “Crushing behaviour of cylindarical and radial corrugated composite tubes”, IC2MS, 5-7 august 2008, Melaka Malaysia.
66
S.Sulaiman, M.K.A Ariffin, A.A. Faieza and Elfetori F. Abdewi, “Effects of shape and geometry of on the energy absorption of fiberglasss composite tubes” ICCE-16, 20-26 July 2008 Kunming China.
67
S.Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F.Abdewi, “Manufacturing of Radial Corrugated Composite Tubes for Crushing Behaviour and Energy Absorption”, AMPT 2008, 2-5 November 2008, Manama, Bahrain.
68
S.Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F.Abdewi, “Optimisation of Die Casting Design”, AMPT 2008, 2 -5 November 2008. Manama, Bahrain.
69
S.Sulaiman, T.R.Vijayaram and R.Samin, “Squeeze casting technique for processing light metals, alloys and metal matrix composites”, Proceeding WEC 2007, 5-9 August 2007, Penang.
70
Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2008b, 21st – 23rd May, 2008). Heuristic Model for Improving Risk Priority Number by using Overall Equipment Efficiency International Conference on Mechanical and Manufacturing Engineering 2008 (ICME2008) Johor Bahru, Johor, Malaysia.
71
Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2008a). Development of traditional assembly line balancing by using new model assembly line balancing. International Conference on Plant Equipment and Reliability - ICPER 2008.
72
Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2007). Development of traditional assembly line balancing using new model assembly line balancing. International Conference on Applications and Design in Mechanical Engineering.
73
S.Sulaiman, Y.P.Lim and M.M.H.M.Ahmad, “Combination effect of grain refiner and modifier on the metallurgical properties of LM6 Al.Si sand casting” Proceeding WEC 2007, 5-9 August 2007, Penang.
74
Esmaeilian, G. R., M.M.H.MegatAhmad, S.Sulaiman, N.Ismail, & M.Hamedi. (2007). Assembly Line and Balancing Assembly Line. National Intelligent System and Information Technology Symposium (UPM), 07(2nd), 232-240. Page 40/62
75
Gholam Reza esmaeilian, M.M.H.M.Ahamd and S.Sulaiman, “ Assembly line and balancing assembly line”, Proceeding WEC 2007, 5-9 August 2007, Penang.
76
P. Matooriam, S.Sulaiman and MMH. Megat Ahmad, “Using Taguchi quality engineering method to optimize electrical discharge turning”, Proceeding of Conference on applications and design in Mechanical Engineering, 25-26 October 2007 Kangar Perlis, Malaysia, pp472-476.
77
G.R.Esmaeilian, R.Samin, M.M.H.Megat Ahmad, S.Sulaiman and N.Ismail, Development of traditional assembly line balancing using new model assembly line balancing”, Proceeding of Conference on applications and design in Mechanical Engineering, 25-26 October 2007 Kangar Perlis, Malaysia, pp13-17.
78
E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi,’Lateral collapse of composite radial corrugated tubes’, International Conference on Composite Materials and Nano-Structures, iC2MS’06, 25-29 April 2006, Shah Alam Selangor Malaysia.
79
T.R.Vijayarm, S.Sulaiman, A.M.S.Hamouda and M.M.Megat Ahmad, ‘Composite materials characterization using SEM: Current status and future trends’, 13th Int. Scientific Conference of Electron Microcopy, Penang Malaysia, 21-25 Sept 2006.
80
E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi,’An experimental investigation into crushing behaviour of radial corrugated composite tube’, Third Internation Conference on Structural Stability and Dynamics, ICSSD, 19th-22nd June 2005, Florida, USA.
81
E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi,’An experimental investigation of the effect of specimen shape and geometry on the energy absorption of fiber glass composite tubes’, Internation Advanced Technology Congress, IATC 2005 6-8 December 2005, Putrajaya Malaysia, pp238-245.
82
L. Ying Pio, S. Sulaiman, A.M.Hamouda and M.M.M.Ahmad,”Grain refinement of LM6-Si alloy sand casting to enhancement mechanical properties”, Proceeding of 8th Int. Conf. on Advances in Materials and Processing Technologies AMPT, 16-19th May 2005, Poland, pp.625-629.
83
E,F.Abdewi, S.Sulaiman, A.M.S.Hamouda and E.Mahdi, “Effect of geometry on the crushing behaviour of laminated corrugated composite tubes”, Proceeding of 8th Int. Conf. on Advances in Materials and Processing Technologies AMPT, 16-19th May 2005, Poland, pp.1-4.
84
T.R.Vijayaram, S.Sulaiman, A.M.Hamouda and M.H.M.Ahmad, “Quality control aspects and prospects to reduce rework and rejection in metallurgical industries”, Proceeding of 8th Int. Conf. on Advances in Materials and Processing Technologies AMPT, 16-19th May 2005, Poland, pp.567-570.
85
T.R.Vijayaram, S.Sulaiman, A.M.Hamouda and M.H.M.Ahmad, “Computer simulation of solidification of castings processed in metallurgical engineering foundries”, Proceeding of 8th Int. Conf. on Advances in Materials and Processing Technologies AMPT, 16-19th May 2005, Poland, pp571-577.
86
Lim Ying Pio, Shamsuddin Sulaiman, “The simulation of sand castings process with MAGMASOFT”, Proceeding of the 2nd INTERNATIONAL Conference on Mechatronics, ICOM’05, 10-12 May 2005, Kuala Lumpur, Malaysia, pp789-796.
87
Thoguluva Raghavan Vijayaram, Mohamad Sayuti, Shamsuddin Sulaiman and Abdel Magid Salem Hamouda, “Quantification of mechanical properties and characterisation of fracture surfaces on the ascast quartz particulate reinforced aluminium- 11% silicon alloy matrix composites”, Abstract published in ICCE12 Spain International Conference Proceedings, 2005.
Page 41/62
88
N.Ismail, M.R.Osman, C.F.Tan, S.V.Wong, S.Sulaiman, “Extraction of cylindrical features from neutral data format for CAD/CAM integration”, Proceeding of Int. Eng. Convention 2004, 22-25 August 2004, Amman Jordan.
89
R. Samin, N.Ismail, S.Sulaiman, R.Ali, M.M.Hassan, “Robot Industry trajectory planning using MSC Visual Nastran”, Proceedings of the 19th International Conference on CAD/CAM, Robotics and Factories of the future (CARS & FOF 2003) 22-24 July 2003 Kuala Lumpur, pp. 911-918.
90
Suditama Sulaiman, M.M.H.Megat Ahmad, S.Sulaiman, N.Adam,”Experiment Analysis of Thermal Storage Material and Heat Transfer Characteristic pipes arrage heated immerse in the material Thermal Storage”, 3rd Int. Conf. On Advances in Strategic Technologies (ICAST 2003) 12-14th August 2003, Kuala Lumpur. Pp1045-1048.
91
S.Sulaiman, A.M.S. Hamouda and M.K.A.Ariffin, “Design and Fabrication of Plastic Injection Mould”, Proceeding of AMPT2003, 8-11 July 2003, Dublin Ireland, pp1603-1605.
92
S.Sulaiman, A.M.S. Hamouda, “Modelling and Experimental Investigation of Solidification Process in Sand Casting”, Proceeding of AMPT2003, 8-11 July 2003, Dublin Ireland, pp531-534.
93
Shamsuddin Sulaiman, “Numerical Analysis of Solidification in Casting Process”, Proceeding of The 3rd Int. Conf. On Numerical Analysis in Engineering, 13-15 March 2003, Batam Indonesia, pp2.7-2.10.
94
Shamsuddin Sulaiman, “An Application of Network Method in Thermal Transient Casting Process”, Proceeding of The 3rd Int. Conf. On Numerical Analysis in Engineering, 13-15 March 2003, Batam Indonesia, pp2.11-2.19.
95
S.Sulaiman, A.M.S Hamouda and M.K.A Ariffin, “Design and fabrication of plastic injection mould”, AMPT 2003, 8-11 July 2003, Dublin Ireland.
96
M.K.A Ariffin, S. Sulaiman, M.M.Hamdan, Z.Leman, N Ismail, “Design, Analysis and Fabrication of Plastic Injection Mould for Tensile Test Specimen”, World Engineering Congress 2002, 22-25 July 2002, Sarawak Malaysia.
97
M.K.A Mohd Ariffin, S. Sulaiman, M.M. H.Megat Ahmad, “Plastic Flow Simulation of Plastic Injection Moluding Process”, The International Conference on Mechatronics, 12-13 February 2001, Kuala Lumpur.
98
Razali Samin, Napsiah Ismail Ismail, Shamsuddin Sulaiman, Roslizah Ali, Md. Mahmud Hasan, “Robot Manipulation Trajectory Planning for Complex Positions”, Proceeding of The Second World Engineering Congress 2002, 22-25 July 2002, Kuching Sarawak Malaysia, pp425-430.
99
Tang S.H., S.Sulaiman, Chia A.P. “Industrial Robot Selection System – A Preliminary Study”, Proceeding of The Second World Engineering Congress 2002, 22-25 July 2002, Kuching Sarawak Malaysia, pp416-418.
100
Rosnah Mohd Yusuff, M.M.H.Ahmad, S.Sulaiman, Z.Mohamad, “Implementation of ComputerBased Technologies for the Small and Medium Scales Industries of Malaysia”, Proceding of The Second World Engineering Congress 2002, 22-25 July 2002, Kuching Sarawak Malaysia, pp102105.
101
Tan Chee Fai, Napsiah Ismail, Mohd Rasid Osman, Wong Shaw Voon, Shamsuddin Sulaiman, “The Development of Hole Recognition System for Machined Part”, Proceeding of The Second World Engineering Congress 2002, 22-25 July 2002, Kuching Sarawak Malaysia, pp19-22.
102
Tang S.H., Sulaiman.S., Hashmi M.S.J, “Computer-Aided Design in Subtractive and Additive Prototyping”, Proceeding of The Second World Engineering Congress 2002, 22-25 July 2002, Page 42/62
Kuching Sarawak Malaysia, pp342-346. 103
Wong Choon Tat, Shamsuddin Sulaiman, Napsiah Ismail, A.M.S. Hamouda “ Design and Simulation of Plastic Injection Moulding Process”, Proceeding of The Second World Engineering Congress 2002, 22-25 July 2002, Kuching Sarawak Malaysia, pp193-198.
104
M.K.A.Ariffin, S. Sulaiman, M.M.Hamdan, Z.Leman and N.Ismail “Design, Analysis and Fabrication of Plastic Injection Mould for Tensile Test Specimen”, Proceeding of The Second World Engineering Congress 2002, 22-25 July 2002, Kuching Sarawak Malaysia, pp329-332.
105
S. Sulaiman, Y.B .Leong, “Development of Thermal Analysis Software of Casting Process, Proceeding of The Second World Engineering Congress 2002, 22-25 July 2002, Kuching Sarawak Malaysia, pp189-192.
106
S.Sulaiman, “Modelling of Thermal History of Sand Casting Process”, Int. Conf. Of AMPT01, 1921 Sept 2001, Madrid Spain.
107
S.Sulaiman, “An experimental investigation of temperature history of sand casting process”, Int. Conf. Of AMPT01, 19-21 Sept 2001, Madrid Spain
108
Tan Chee Fai, Napsiah Ismail, Mohd Rasid Osman, Wong Shaw Voon, Shamsuddin Sulaiman, “The implemention of feature recognition system for CAD/CAM Integration”, SCORED 2001 UTM.
109
Shamsuddin Sulaiman, “Simulation and verification of thermal transient of sand casting process”, International Conf. On Mechatronic 2001, 13-14 Feb 2001 Kuala Lumpur.
110
M.K.A.Mohd Ariffin, S.Sulaiman, M.M.H.M.Ahmad, ”Plastic Flow Simulation of plastic injection Moulding Process”, International Conf. On Mechatronic 2001, 13-14 Feb 2001 Kuala Lumpur.
111
Tang, S.H, Sulaiman,S. Hashmi, M.S.J. “Precision Robotic Manipulator based Rapid Prototyping System”, Proceeding of the IASTED Int. Conf. Robotics and Automation 2000, August 14-16, 2000, Honolulu, Hawai USA.
112
S.Sulaiman. A.M.S.Hamouda, ”Modelling of thermal history of sand casting process”, 5th Asia Pacific Conference on Material Processing 25-27 June 2001 Seoul, Korea.
113
S.Sulaiman, A.K.H.Lim, C.L.Tan “An experimental investigation of temperature history of sand casting process”, Proceeding of ICAMT2000 UTM, pp299-304.
114
S.Sulaiman, A.K.H.Lim, “Modelling of Thermal Analysis of Sand Casting Process”, Proceeding of ICAMT2000 UTM, pp595-600.
115
S.Sulaiman, A.M.S.Hamouda, “An experimental investigation of temperature history of sand casting process”, Int. Conference on Advances in Strategic Technologies- 2000 UKM Kuala Lumpur 15-17 August 2000.
116
M.A. Abdulmawlla Jolgaf, A. M. S. Hamouda, S. Sulaiman and M. M. Hamdan: Finite Element Simulation And Optimization Of Plan Strain Closed Die Forging Process, International Conference On Advances In Strategic Technology, ICAST 2000, 15-17 August 2000, Malaysia.
117
M.A. Abdulmawlla Jolgaf, A. M. S. Hamouda, S. Sulaiman and M. M. Hamdan: on the influence of unequal friction into load, metal filling and residual stresses in closed die forging process: finite element approach, 3rd international conference on mechanics and material in design, 2931 may 2000, Orlando, USA.
118
M. A. Abdulmawlla Jolgaf, A. M. S. Hamouda, S. Sulaiman and M. M. Hamdan: Development of Page 43/62
CAD/CAM System for Closed-Die Forging Process, International Manufacturing Conference in China, (Hong Kong, 16-17 August 2000). 119
C.K.Ooi, M.M.H. Megat Ahmad, M.R.Osman, M.Y.Rosnah, S.Sulaiman, M.Y.Ismail, “The Effectiveness of Managing Long Lead-Time Parts by Family Ordering”, Proceeding of World Engineering Congress 19-22nd July 1999, Kuala Lumpur, pp459-464.
120
M.A.Hossain Mollah, S.M.Sapuan, S.Sulaiman,”Design Aspects of A Composite Material Country Boat”, Proceeding of World Engineering Congress 19-22nd July 1999, Kuala Lumpur, pp429-434.
121
S.Sulaiman, M.R.Osman, Y.K.Chin,”Design and Development of an Automated Orientation Detection System with Robot Arm and PLC Integration”, Proceeding of World Engineering Congress 19-22nd July 1999, Kuala Lumpur, pp363-367.
122
Y.C.Low, M.R. Osman, S.Sulaiman, N.Ismail, “ Investigation Of The Need For Local Plastic Injection Moulding (PIM) Robot”, ”, Proceeding of World Engineering Congress 19-22nd July 1999, Kuala Lumpur, pp357-361.
123
S.Sulaiman, A.M.S.Hamouda, D.T.Gethin, “An experimental analysis of metal filling in diecasting process”, Proceeding AMPT ’99, 3rd – 6th August ’99, Dublin, Ireland.
124
S.Sulaiman, W.K.Binienda, Y.Wang, “Internal Pressure Effect on Residual Stresses for Filament Wound Composite Tubes”, Proceeding of World Engineering Congress 19-22nd July 1999, Kuala Lumpur., pp51-55.
125
S. Sulaiman, A.M.S.Hamouda, S.Abedin, “Simulation of Metal Filling Progress During Casting Process”, 4th Asia Pacific Conference on Material Processing, Singapore, 19-21 May 1999.
126
Elfetori F. Abdewi, S.Sulaiman, A.M.S.Hamouda, “Computational Study on the Effect of Thermal Stresses on Die Casting Design”, Proceeding of World Engineering Congress 19-22nd July 1999, Kuala Lumpur, pp337-343.
127
A.M.S.Hamouda, S.Sulaiman, , C.K.Lau, “Finite Element analysis on the effect of workpiece geometry on the quencing of ST50”, Proceeding Int. Conf. Of Advances in Materials and Processing Technology (AMPT99), 3rd – 6th August ’99, Dublin, Ireland..
128
S. Sulaiman, A.M.S.Hamouda, S.Abedin, “Simulation of Metal Filling Progress During Casting Process”, 4th Asia Pacific Conference on Material Processing, Singapore, 19-21 May 1999.
129
A.M.S.Hamouda, S.Sulaiman, , C.K.Lau, “Finite Element analysis on the effect of workpiece geometry on the quencing of ST50”, Proceeding Int. Conf. Of Advances in Materials and Processing Technology (AMPT99), 3rd – 6th August ’99, Dublin, Ireland.
130
F.Hassan, S.Sulaiman, A.M.S.Hamouda, “Casting materials: Recent advances and application “, Int. Conf. Of Advances in Materials and Processing Technology (AMPT98), 24-29 August 1998, Kuala Lumpur, pp134-144.
131
Elfetori F. Abdewi, S.Sulaiman, A.M.S. Hamouda, Megat M.Hamdan,”Finite Element Analysis and Optimization of Die Casting Design”, Int. Conf. of Advances in Materials and Processing Technology (AMPT98), 24-29 August 1998, Kuala Lumpur,pp1006-1016.
132
S. Sulaiman, A.M.S. Hamouda, S.Abedin, “Three-Dimensional Finite Element Thermal Analysis of Die/Mould for Casting Industry Applications”, Int. Conf. of Advances in Materials and Processing Technology (AMPT98), 24-29 August 1998, Kuala Lumpur, pp1017-1028.
133
S. Sulaiman, A.M.S.Hamouda and S.Abedin, “Development of Computer Aided Design (CAD) Page 44/62
system for casting process”, Proc. of Int. Conf. on Advences in Materials and Processing Technologies, AMPT-97, Portugal, June 1997. 134
M.D.Huda, R.Puyani, S.Sulaiman and M.S.J.Hashmi, “Development of a mathematical model for zinc oxide varistor for low weight loss and shrinkage rate”, Proceeding of Int. Conf. on Advances in Materials and Processing Technologies, AMPT-97, Portugal, June 1997.
135
M.D.Huda, R.Puyani, S.Sulaiman and M.S.J.Hashmi, “Optimization of sintering process for improved electrical characteristics of Zinc Oxide Varistors”, Proc.of Int. Conf. FAIM’96 Georgia USA pp.739-747.
136
Shamsuddin Sulaiman, Tang Sai Hong, “Gating system design in sand casting”, Proceeding of the 7th Int. Conf. on Machine Design and Production, Turkey Sept 11-13 1996.
137
Shamsuddin Sulaiman, Tham Chee Keen, “Flow analysis along runner and gating system of casting process”, Proceeding of Int. Con. on Material Processing, Hong Kong 12-14 Nov. 1996.
138
A.M.S.Hamouda, S.Sulaiman and M.S.J. Hashmi, “Fast Upsetting of circular cylinders of Aluminium Metal Matrix Composites: Experimental Results and Numerical Analysis”, Proc. of the 6th Int. Conference on Metal Forming ’96, Krakow Poland, Jun23-26 1996 pp.723-727.
139
Shamsuddin Sulaiman, “Expert System for Manufacturing Process”, Proc. Pacific Conf. on Manufacturing December 19 - 22, 1994, Jakarta Indonesia pp.339-346.
140
Shamsuddin Sulaiman, Shahnor Basri, “An Application of Expert System in the Casting Process”, 5th International Conf. on Machine Design and Production September 16-18 1992, METU, Ankara-Turkey.
141
S. Sulaiman, D.T. Gethin, “An Application of a Thermal Network Analysis for Casting Simulation”, Proceedings of the 7th International Conference on Numerical Methods in Thermal Problems 1991. (Eds. Lewis, R.W., Chin J.H. and Homsey G.H), pp248-258.
Other Publications (Local/International News Coverage) NO
Title
1
M.D. Azaman, S.M.Sapuan, S.Sulaiman, E.S.Zainudin, K,Abdan and M.R. Mansor, “Preliinary study the effect of packing pressure on thin-walled parts by injection moulding process”, The 2nd UPM-UniKL Symposium, on Polymeric Materials 2013, 28February 2013
2
M.U. Rosli, M.K.A. Ariffin, S.M. Sapuan and S. Sulaiman, “Material selection of thermoset matrix for natural fiber composites automotive armrest using AHP Method”, The 2nd UPM-UniKL Symposium, on Polymeric Materials 2013, 28February 2013.
3
M.Jolgaf, S.B.Sulaiman, M.K.A.Ariffin, A.A.Faieza and BT Hang Tuah Baharudin,’Optimization of plate forming process parameters’, Proceedings of EnCon2010, 3rd Engineering Conference on Advancement in Mechanical and Manufacturing for Suatainable Environment, April 14-16, 2010, Kucing Sarawak, Malaysia.
4
G.R.Esmaelian, M.M.H.M.Ahmad, S.Sulaiman, N.Ismail, “Assembly line and balancing assembly line”, Intelligent System and Information Technology Symposium 2007, 30-31 October 2007, ITMA, UPM Serdang Selangor.
5
S.S. Imihzri, S.M.Sapuan, M.M.H.M.Ahmad, S.Sulaiman, “A comparison study on increasing injection location for glass fiber reinforced PA 6,6 composite automotive clutch pedal”, Proceeding of 3rd Page 45/62
National Technical Postgraduate Symposium 2004 Dec 15th Kuala Lumpur. 6
S.S. Imihzri, S.M.Sapuan, M.M.H.M.Ahmad, S.Sulaiman “Mould Design Consideration for Injection Moulding of Short Glass Fiber Reinforced Polyamide Composite for Clutch Pedal”, Proceeding of Advanced Technology Congress 2003, 20-21 May 2003, Putrajaya.
7
A. Manaf, N.Ismail, S.Sulaiman "Reverse Engineering Technique for Modelling Free form Feature Surfaces" Proceeding of Advanced Technology Congress 2003, 20-21 May 2003, Putrajaya.
8
P. Nopnakorn, N.Ismail, MMHM Ahamad, S.Sulaiman "A Prototype 2D Drafting System in ISO Mechanical Engineering Drawing Constraint" Proceeding of Advanced Technology Congress 2003, 20-21 May 2003, Putrajaya.
9
S.S.S.Imihezri, S.M.Sapuan, M.H.M. Ahmad and S.Sulaiman, “Product design consideration for short glass fibre reinforced composite clutch pedal” Proceeding of Advanced Technology Congress 2003, 20-21 May 2003, Putrajaya.
10
C.F.Tan, N.Ismail, S.V.Wong, S.Sulaiman and M.R.Osman "Development of A knowledge-based Feature Recognition for System for Mechanical Parts" Proceeding of AIAI Conf. 24-25 June 2003, Kuala Lumpur.
11
Ishak bin Aris, A.K.M.Parves iqbal, Shamsuddin Sulaiman, Abd. Rahman Ramli and Md Mahmud Hassan, “Development of a painter robot for construction industry”, Proceeding of AIAI Conf. 2425 June 2003, Kuala Lumpur.
12
H.B.Lee, S.M. Sapuan, S.Sulaiman, M.M.H.M.Ahmad, ”Design and Rapid Prototyping Process for a Polymeric Based Composite Automotive Pedal Box System”, Proceeding of Symposium on Concurrent Engineering Manufacturing System for Polymeiric-based Composite Automotive Components, 25th July 2003, Faculty of Engieering UPM, Editor Mohd Sapuan Salit, pp5-20.
13
S.S.S.Imihezri, S.M.Sapuan, M.H.M. Ahmad and S.Sulaiman, “Product Design Consideration for Short Glass Fiber Reinforced Composite Clutch Pedal”, Proceeding of Symposium on Concurrent Engineering Manufacturing System for Polymeiric-based Composite Automotive Components, 25th July 2003, Faculty of Engineering UPM, Editor Mohd Sapuan Salit, pp55-63.
14
N. Ismail, C.F.Tan, S.V.Wong, M.R.Osman, S.Sulaiman, “ Rule-Based Feature Extraction and Recognition from STEP File”, 2nd Student Conference on Research and Development (SCOReD2002), July 16-17, 2002, Shah Alam, Malaysia.
15
Shamsuddin Sulaiman, A.K.Lim, Lai Tze Siung, Tan Chen Loon, “ Experimental and Thermal Transient of Sand Casting Process”, MechE Seminar on Information Technology in Mechanical and Manufacturing Engineering, 4th Oct 2001, UPM.
16
S. Sulaiman, Wong Choon Tat, “Mould design and fabrication for plastic injection moulding”, Malaysian Science and Technology Congress (C) 2001, Penang.
17
S. Sulaiman, Wong Choon Tat, “Design, Analysis and Simulation of plastic product”, Malaysian Science and Technology Congress(B) 2001, Melaka.
18
Elnougomi A.O, Desa Ahmad, Azmi Yahya, Shamsuddin S., “Development of tractor mounted peanut harvesting equipment”, UPM Engineering Research Seminar and Exhibition, 2-3 Oct 2001.
19
A.M.S. Hamouda, S. Sulaiman, “The Coming Era of Intelligent Materials: Business Opportunities”, Malaysian Science and Technology Congress ‘97, Genting Highlands, 13 - 15 October 1997.
20
Shamsuddin Sulaiman, “Thermal Network Analysis for Casting Process in High Pressure Die Casting”,
Page 46/62
National Conference on Engineering Education and Research, 15-16 June 1993, UPM. 21
S.Sulaiman, A.M.S.Hamouda and M.H.Megat, “Thermal Network Analysis Software TNAS”, Report and Manual presented in Expo Science and Technology, 2-4 Nov 2002, PWTC Kuala Lumpur.
22
Gasing plastic, Menyusur akar orang kita, 6 februari 2014 (Laporan Khas TV1, 6 Februari 2014: Jam 12:30 – 13:00)
f.
Recognition/Awards
No Year 1 2014 2 2011 3 2005
Excellent in Service Award 1998-2014 2 Bronze medals Research Award Silver Jublee Medal with zirconia, Research Award – Poland May 2005 Silver Medal Research Award (TNAS) – Invention and Research Exhibition Silver Medal Research Award (Corrugated Tubes Machine) Bronze Meal Research Award (Analysis and Fabrication of Injection Molded glass polyamide composite) Bronze Medal Research Award (Development of Intelligent Process Planning system for prismatic parts)
4 5
2003 2002
Who’s Who in the World 20th Edition 2003 Gold Medal Research Award – R&D Exhibition UPM Silver Medal Research Award – Expo S&T 2002 Ministry of Science, Technology and Environment of Malaysia
6
1995
Asian Development Award for training in Akron Ohio USA Felowship program in China- UNESCO 1995
5. Professional Services and Administrative Duties a.
Professional Services
International No 1 2
Detail International Conf. on Design, Materials Manufacturing, Kuala Lumpur, 25-27 May 2016.
and
Designation
Year
International Advisory Commettee member
2016
3
2006 International Conference on Mechanical, Manufacturing, Modelling and Mechatronics (IC4M 2016), Kuala Lumpur, 27-29 Feb 2016.
Program Committee Chair
2016
4
International Conf. on Mechanical Automation and Control Engineering, February 27-29, 2016, Phuket, Thailand
Technical Committee member
2016
5
5th International Conf. on Key Engineering Materials (ICKEM 2015), March 21-23, 2015, Singapore.
Honorary Chair
2015
6
Internaational Conf. on Material, Engineering and Technilogy (ICMET 2015), July 1-2, 2015, Bali Indonesia.
Honorable Committee Member
2015
Page 47/62
7
4th International Conf. on Manufacturing and Industrial Engineering (ICMIE 2015), March 21-23, Singapore.
Honorary Chair
2015
8
Jurnal Kejuruteraan UKM
International Advisory Board Member
1st Jan 2015 – 31st Dec 2018
9
International Conference on Advanced Material Processing Technology, Madrid, Spain, Dec 14-17 2015.
Steering Committee member
2015
10
Internaational Conf. on Material, Engineering and Technilogy (ICMET 2014), July 17-18, 2014, Bangkok, Thailand.
Honorary Chair
2014
11
Internaational Conf. on Material, Engineering and Technilogy (ICMET 2014), July 17-18, 2014, Bangkok, Thailand.
Keynote Speaker
2014
12
CUTSE2014 Curtin University Science and Engineering International Conference, 3-4 December 2014, Kucing, Sarawak, Malaysia.
Scientific Committee Member
2014
13
4th International Conference on Key Engineering Materials (ICKEM2014), March 22-23, 2014, Bali Indonesia.
Honorary Chair
2014
14
International Conference on Advanced Material Processing Technology, Dubai UAE, Nov 16-20, 2014.
Steering Committee member
2014
15
American Journal of Software Engineering and Application
Editorial Board Member
2014 – To date
16
An International Journal of Optimization Control: Theories and Applications
Editorial Board Member
2013 – To date
17
International Conference on Advanced Material Processing Technology, Taipei, Taiwan. Sept 22-26, 2013.
Steering Committee member
2013
18
International Conf. on Advances in Mechanical and Manufacturing Engineering (ICAM2E) 2013, Kuala Lumpur.
Organising Committee Member/ Session Chairman
2013
19
2013 World Congress on Electronics and Electrical Engineering, December 29-30, 2013, Kuala Lumpur.
Program Chair
2013
20
Int. Conf. of Manufacturing Engineering (iMEC) Kuantan Pahang, Malaysia, Sept 21-23, 2013.
International Advisory Committee
2013
21
Int. Conf. on Mechanical and Electrical Technology (ICMET2013), Chengdu, China, July 20-21, 2013.
Conference Chair
2013
22
Int. Conf. on Mechanical and Electrical Technology (ICMET2013), Chengdu, China, July 20-21, 2013.
Keynote Speaker
2013
23
International Conference on Advanced Material
Steering Committee member
2012 Page 48/62
Processing Technology Wollongong Australia, 23-25 Sept 2012. 24
International Conference on Advanced Material Processing Technology ,Istanbul, Turkey 13-16 July 2011 International Conference on Advanced Material Processing Technology Paris, France, Oct 2010.
Steering Committee member
2011
Steering Committee member
2010
26
An International Journal of Optimization and Control: Theories & ApplicationISSN: 2146-0957, eISSN:21465703, Dora Co. Ltd, Bursa, Turkey
Editorial Advisory Board
2010-To date
27
International Conference on Advanced Material Processing Technology, Kuala Lumpur, Malaysia, September 2009.
Steering Committee member
2009
28
International Conference on Advanced Material Processing Technology, Manama, Bahrain Oct 2008.
Steering Committee member
2008
29
International Conferences
Keynote Address/Speaker
2001-To date
30
International Conference on Advanced Material Processing Technology Seoul, Korea, October 7-10, 2007
Steering Committee member
2007
31
12th Int. Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S 2006, Gliwice, Poland. 2730 November 2006.
International Programme Committee Member
2006
32
International Conference on Advanced Material Processing Technology Las Vegas, Nevada, USA, July 30-August3, 2006.
Steering Committee member
2006
33
11th Int. Scientific Conference on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S 2005, Gliwice, Poland. 6-9 December 2005.
International Programme Committee Member
2005
34
International Conference on Manufacturing and Material Processing, Kuala Lumpur March 2006.
International Committee Member
2006
35
International Conference on Achievements in Mechanical and Material Engineering, Gliwice-Wisla, Poland. 16-19 May 2005
International Committee Member
2005
36
International Conference on Advanced Material Processing Technology Gliwice-Wiala, Poland. 16-19 May 2005 3rd International Conference on Advanced Manufacturing Technology ICAMT 2004, Kuala Lumpur, 15-18 May 2004
Steering Committee member
2005
International Committee Member
2004
12th International Scientific Conference on Achievement in Mechanical and Materials Engineering AMME2002 Gliwice-ZaKopane Poland 7-
International Committee Member
2003
25
37
38
Page 49/62
13 Dec 2003 39
11th International Scientific Conference on Achievement in Mechanical and Materials Engineering AMME2002 Poland 10-13 Dec 2002.
International Committee Member
2002
40
International Conference on Advanced Material Processing Technology 8-11July 2003 Dublin, Ireland
Steering Committee member
2003
41
International Conference on Advanced Material Processing Technology 19-21 Sept 2001 Madrid Spain
Steering Committee member
2001
42
Advances in Material and Mechanical Engineering Conference AMME , Poland, 20-22 Sept 1999.
International Committee Member
1999
43
International Conference on Advanced Material Processing Technology, 2-6 August 1999 Dublin, Ireland.
Steering Committee member
1999
44
10th Jublee International Scientific Conference on Achievement in Mechanical and Materials Engineering AMME2001 Cracow, Poland 9-13 Dec 2001
International Committee Member
2001
45
Symposium on Advanced Materials & Design , 29-31 May 1999 Orlando USA.
International Committee Member
1999
46
International Conference on Advanced Material Processing Technology 27-29 August 1998 Kuala Lumpur
Chairman
1998
National No 1 2
Detail Infranstructure University Kuala Lumpur Board of Study MSc Eng (Manufacturing Eng) IIUM.
Designation Industrial Advisory Panel Advisory Panel
Duration 2015 2013
3
Board of Study (Bac. Tech. Manufac. Design), IPROM UniKL
Industirial Advisory Panel Member
2013
4
Bac. Sc (Manufacturing Eng) School of Mechanical Eng. USM.
External Assessor
2008/2009
5
B.Eng (Manufacturing) University of Malaya.
Advisory Panel
2014
6
UITM, UTM, UKM, IIUM, UMP, UTeM, UniKL, USM,
2005- To date
7
Bac. Sc (Mech). Faculty of Mechanical Engineeirng UMP, Pekan, Pahang.
External Assessor Panel (Promotion of Professorship) External Assessor
8
B. Tech (Manufacturing)
External Assessor
2014-2015
2012-2013
Page 50/62
B.Tech (Product Design) Dept. of Manufacturing Technology Faculty of Engineering Technology, UTeM. 9
B. Eng Tech (Automotive) MSI, UniKL, Kulim
External Assessor
2013-2014
10
Master of Eng (Manufacturing) School of Manufacturing Engineering, UNIMAP.
External Assessor
2013/2014-2014/2015
11
TATI Univ. College, Kemaman.
External Assessor
12
Malaysian Qualifications Agency (MQA)
Expert Panel
1st June 2009-30th May 2011 1998- To date
13
Jabatan Perkihmatan Awam (Federal Training Funds)
Expert Panel/Judge
2013
14
Board of Study (MS Manufac. Eng) International Islamic University Malaysia
Advisory Panel Member
2011-2012
15
Department of Mechanical Engineering University Tenaga Malaysia (UNITEN)
Industirial Advisory Panel Member
1st July 2009-30th June 2011
16
9th National symposium on Polymeric materials 2009 15-16 December 2009, Hotel Residence, UNITEN
Committee Member
2009
National Vocational Training Council Ministry of Human Resources, Malaysia
Trade Advisory Committee (Plastic Industry)
1995-1998
19
National Vocational Training Council Ministry of Human Resources, Malaysia
Trade Advisory Committee (Foundry)
1999- to date
20
Advanced Material Working Group Ministry of Science, Technology and the Environment of Malaysia
National Working Committee
1997-2002
21
Japan-Malaysia Technical Institute (JMTI) Ministry of Human Resources, Malaysia Bhg Pendidikan dan latihan (Kemahiran) MARA
Chairman, National Training Advisory Committee Curriculum Advisory Committee
1999- To date
23
The Second World Engineering Congress 22-25 July 2002, Kuching Sarawak, Malaysia
Technical Committee (Manufacturing Division)
2002
24
Development of Curriculum for National Occupational Skill Standard, National Vocational Training Council Ministry of Human Resources, Malaysia
Committee Member
Oct 1992-1996
25
Grant Evaluation Committee (Manufacturing/Engineering and Technology Division) Ministry of Science, Technology and the Environment /Innovation of Malaysia
Panel Member
2000 – To date
26
National, Conference proceeding 9th National Symposium of Polymeric Materials NSPM 2009
Chief Editor
2009
27
National, National Symposium on Polymeric
Advisor
2009
17 18
22
2005-To Date
Page 51/62
Materials 2009 28
National, National Symposium on Polymeric Materials 2009
Scientific Committee
2009
29 30
Kolej Negeri,Seremban Research & Development Exposition 2003 9-12 October 2003 PWTC Kuala Lumpur
Advisory Member Organising Committee Member
2002-2005 2003
31
Lembaga Pengelola Sekolah Menengah Agama MAIWP
Board Member
2014-To date
Detail
Designation
Duration
1
Sport and Social Club Faculty of Engineering
President
2012-2014
2
Mentor for New Lecturer (Dr. Siti Azfanizam)
Mentor
2012-2013
3
Panel evaluator for program Bachelor of Wood Science and Technology
Panel
2011-2012
4
Engineering Doctorate Program
Member
2011 - now
5
Institute of Advanced Technology (ITMA - ISRL)
Research Associate
2010 - 2011
6
Institute of Tropical Forestry and Forest Products (INTROP)
Research Associate
2012 -2013
7
ROBOCON, UPM
Team Manager (Mechanical)
2008-2009
8
Inter-institutional race, Eimarace
Director
2009-2010
9
Academic Advisor
Advisor
2006 - present
10
Shell Eco Marathon
Director
2011-2012
11
AUTO-CAD for Undegraduate
Speaker and Demonstrator
2007
12
SAR-EAC Report for Bachelor of Mechanical and Manufacturing Engineering
Member
2009
University No
b.
Technical Reviewer (Selected)
No 1
Journal/Conference Materials and Design
Designation Reviewer
Duration 2005- to date
2
Material Processing and Technology
Reviewer
2001-To date
3
Alloys and Compound
Reviewer
2014- to date
4
ICAM2E, Conference
Technical Reviewer
2013
5
Ain Shams Engineering Journal
Reviewer
2013-to date
Page 52/62
6
Machining Science and Technology
Reviewer
2012- to date
7
Journal of Mechatronics
Reviewer
2008-to date
8
Journal of Petroleum and Gas Engineering
Reviewer
2010- to date
9
Journal of ISSAAS
Reviewer
2011- to date
10
IEM Journal of Institute of Engineer Malaysia
Reviewer
2001-to date
11
Key Engineering Material 2010
Reviewer
2010
12
World Engineering Congress 2010, Serawak
Technical Reviewer
2010
13
NSPM 2009, National Symposium of Polymeric Materials
Technical Reviewer
2009
14
World Engineering Congress 2007, Penang
Technical Reviewer
2007
c. Examiner/ Evaluator PhD External Examiner (International) No 1.
2.
3.
4.
5.
6.
Title Numerical and experimental investigations on forming limit analysis for AISI 316, 316L and 316LN austenitic stainless steel Mechanical alloying, spark plasma sintering and characterisation of Fe-Ni nanopowder
Name
Significance of equal channel angular pressing parameters on the structural enhancement of commercial purity copper Optimization of process parameters of dissimilar aluminum joint by friction stir welding
Year
Ramados
Anna, 2008 India
T. Ashokkumar
Anna, India
2011
Anna, India
2013
R. Raja
Anna, India
2015
A.T. Vijaya Shakrhivel
Anna, India
2015
Sabitha Jannet
Anna, India
2016
Theoretical and experimental studies on evaluation of friction factor in extrusion process of AA6063 and V. Jayaselan AA6063/SiCp composites Experimental Investigation on drilling of polymer matrix composites and GFRP/Aluminium stack
Univ.
PhD External Examiner (National) No 1.
Title Name Microstructures and Mechanical Properties of Aluminium-Silicon Bar Produced by net shape Casting Dodi Proyitno Process
2. Numerical and Experimental Analysis of Powder
Md Mujibur Rahman
Univ.
Year
UTM
2001
UKM
2001 Page 53/62
Compaction Process Prehated machining of hardened steel AISI D2 and 3. optimization of parameters
Mohd Amri Lajis
IIUM
2009
4. Development of Metal Injection moulding
Khairul Rijal Jamaluddin
UKM
2009
USM
2012
UKM
2012
5. Effect of Surface roughness on micro-idententation Chuah Hun Guan Nur Hafiez Mohamad 6. Optimization process on Powder injection Moulding Nur Optimization of machining processes by using criteria of maximum productivity and Mionimujm 7. cost
8. Design and Development of impeller Wind Turbine
Aead M. Ahmed
UNIMAP 2012
Ahmaed Younus Qasim
UNIMAP 2012
Pendekatan kawasan kerja untuk meramalkan Nagur Aziz Kamal 9. pembidas bagi jasad putih automotif bahagian Bashah UKM dibentuk Theoretical modelling of process performance in micro-electro-discharge machining for nonconductive Abu Naim Muhammad 10. IIUM ceramics Abdus Sabur Modeling of processing condition for polypropylene11. nanaclay integral hinges at high heat exposure, Mohd Hilmi Othman
2013
2014
UTHM
2015
Effect of tool path strategies on machining 12. performance
Muhammad Riza
IIUM
2015
Mahalanobis- Taguchi system as a decision making 13. tool for remanufacturing automotive component
Mohd Yazid Abu
UTM
2015
Pembangunan Aloi aluminium untuk pemprosesan 14. logam separa pepejal
Mohd Shukur Salleh
UKM
2015
UKM
2015
UTeM
2015
Penghasilan kelli tahan karat berbusa melalui kaedah pengisi pemegang ruang-pengacuanan suntkan 15. Tan Koon Tatt logam Effect of substrate thickness layer on the mocrostructure , mechanical and wear properties of 16. AlTiN layer coating deposited on Tungsten Carbide Kamil Jawad Kadhim insert cathodic arc PVD technique
Master External Examiner (National) No 1.
Title Analysis of Flow Phenomena in Metal Injection Moulding Process
Name Univ. Year Nor Hafiz Mohamad UKM 2001 Nor Page 54/62
2. Static and Dynamic Analysis of a Drawing Die
3.
Evaluation of cost effective of Manufacturing Processes for producing Metal implant
Sethuraman s/o Vatiapan
UM
2000
Mohamad Tarmizi Omar
USM
2002
USM
2003
Kajian Eksperimen dan Komputer bagi perolakan tabir di atas permukaan isoterma dan bukan-isoterma 4. Sii Tuong Ngan pada perbezaan sudut condong Effects of induced damages on the flexural fatique 5. behaviour of glass fiber reinforced epoxy (GREs)
Wong Teck Kai
Numerical simulation failure of steel plates impated 6. by blunt nose projectiles using pam shock Faidzuli bin Ismail
USM
2004
UM
2004
UKM
2004
Shamsul Bahari bin Azraai
USM
2005
Mohamad Ikhwan Zaini bin Ridzwan
USM
2005
USM
2005
USM
2006
USM
2006
Development of a computer aided die design system Azuddin Mamat (CADDS) Pemprosesan Selari Dalam Simulasi Perambatan 8. Retak Menggunakan Kaedah Induk-Pekerja Choy Hau Yan 7.
9. Heat transfer of compact heat exchanger Optimal design of femoral hip prosthesis using 10. topology optimisation to reduce stress shielding
Failure Analysis of Low-Velocity impact on composite Muhammad 11. plate Zulkarnain Thermal Management of both component and 12. system levels in Elctronics Packaging
Ong Kean Aik
Prediction of microelectronics encapsulation process Mohammad Khalil 13. using finite difference method Abdullah The relationship between the applied torque and 14. stresses in post-tension structures
UNIMAS 2003
Liew Fui Kiew
A study on the effect of different solder constitutive models on the life time estimation of Lead-Free 15. Abdullah Aziz Saad Solder joint using finite element method.
UNIMAS 2006
USM
2006
Kerlakuan aliran dalam process pengacuan suntikan 16. logam. Norazizah Ma’som
USM
2007
Kajian eksperimen dan berangka bagi dua pakej PLCC 17. dipasang debaris secara mengufuk. Sharupuddin Yusoff
USM
2008
USM
2009
USM
2010
USM
2011
Design and geometric optimization of an axial 18. ventricular assist device for reduced blood shear Dhyaa Hadi Hussein, stress Design and analysia of mechanical mating interfaces Normariah Che 19. for reconfigurable machine tool Maideen 20.
Product design and development
Salina Budin
Page 55/62
21.
Thermal effect on packaging process
Ahmad Razlee
USM
2011
Mazlan Mohamed
USM
2011
Khaleed Hussein
USM
2011
Mior Firdaus Mior Abdul Majid
USM
2012
USM
2012
Effect of moisture on ABS Filament material for FDM Siti Nur Amalina Mohd 26. Rapid Prototyping USM Halidi
2013
22. 23.
Development of tool and jig of machining Development of packaging device
24. Numerical Method for Chip Flip Packa
Development of multi-component device loads, torque and temperature measurement for Friction Jauhari Tahir 25. Stir Welding Process Khairudin
Thermal performance analysis and characterization 27. for mobile radio
Chee Jiunn Shyong
USM
2013
Effect of variable helix and pitch tool geometry on the process damping performance in End milling 28. processes
Muhammad Adib Shaharun
UMP
2014
Nurul Farah Adibah Mohd
UTeM
2014
Fazliana Fauzun
UMP
2015
Surface roughness optimization (Opsurf) in Milling 31. Operation of Polyurethene Block Louis Denis Kevin
UNIKL
2015
Effect of injection moulding parameters on 32. warpage deflection
Siti Salamah Mohd Sani
UTeM
2015
Vibhu Vignesh Balachandar
UTHM
2015
Development of Natural fibre composite for 29. engineering application Experimental and Statistical analysis for surface modification of steel and cast Iron using Nd:YAG 30. Laser
Thermal response on nanofluids in the presence of 33. magnetic field with variable stream condition.
Examiner of MSc/PhD Universiti Putra Malaysia No Name 1.
Sepide Najafian (GS16329)
2.
Maryamalsadat Vafa (GS18176)
3.
Aghdas Naimi Sadigh (GS22476)
4.
Giwa Solomon Olanrewaju (GS19097)
Title Productivity of Flexible Manufacturing Cell by Implementing Different Maintenance Policies,.
Type
Year
Internal 2008
Visualing supply chain using social network analysis in project based industry. Internal 2009 Developing a model for supplier selection based on loss functions Investigation of the potential of egusi melon (colocynthis Citrullusl.) seed oil as diesel fuel substitute.
Internal 2009
Internal 2009
Page 56/62
5.
Mahshid Sadat Abtahi Foroushani (GS20207)
Development of an innovative algorithm for the travelling salesman problem (TSP)
Internal 2010
6.
Factors of maximizing solar fraction under wet Yaaseen Rafeeu (GS20559) climate environment,
7.
Wang Bin (GS18190)
Prediction of Turning machine degradation status based on vibration data using back propagation (BP) Internal 2010 Neural Network
8.
Hamidreza panjehfouladgaran (GS 19844)
Development and performance evaluation of mobile Internal 2010 traffic infraction registration system,
9.
Reza Raminfar (GS19818) 2010
10.
Taravatsadat nehzati (GS25201)
11.
Reza Afshar Hosseinabadi (GS20884)
12.
13.
14.
15.
Internal 2010
Development of an integrated model for production planning and cell formation problem in cellular Internal 2010 manufacturing system Production scheduling of reconfigurable manufacturing systems using fuzzy logic technique
Internal 2012
Auto Generation and Auto Adjust of the center of gravity of tabular structure during crush deformation Chairman 2009
Syahrul Azwan bin Sundi @ Simultaneous Five-Axis Machining on the Wall cutting Suandi (M050810004) External 2010 of curved shape component UTHM A Computational simulation of heat transfer to Oon Cheen Sean (KGA turbulent separation fluid flow in a concentric pipe. External 2012 100039) - UM Nurul Husna binti Mohd Nawawi - UTEM
Optimisation of cutter geometrical feature for machining orthopedic, trauma and spinal biomaterials External 2015 implant
Machining parameters optimization for trimming W noor Fatihah binti W operation in milling machine using two level full Mohamad – Unisza (PS0287) factorial design
External 2015
ACCREDITATION EXERCISE UNDER MALAYSIA QUALIFICATION AGENCY (MQA)
No
Institution
Level
Year
Designation
1
City Univ. College of Science and Technology
Bac. Of Engineering Management (Hons) PA0453
Nov 2015
Chairman
2
UMP
Master of Industrial Engineering PA5041
June 2014
Panel
3
KDU College Penang Campus
E.Eng (Hons) Mech Eng. PA4957
Nov 2014
Panel
4
Lincoln Univ. College
Bac. Of Tech. in Mech. Eng PA4387
Dec 2013
Chairman
5
GMI- UMP
Bac. Of Eng. Tech (Manufacturing) PA2290
May 2013
Chairman
Page 57/62
6
KOLEJ ANTARABANGSA TEKNOLOGI & PROFESIONAL
Dip. Tech. Mechanical (Gas) PA
April 2013
Chairman Panel
7
UNITEN
MS Mechanical Eng. PA9733
April 2013
Panel
8
UTHM
MS Manuf. Eng PA3097
Dec 2012
Panel
9
UNISZA
B. Manuf. Tech (Prod. Design) PA3118
Dec 2012
Panel
10
UNIMAP
B. Mech Eng PA2969
Dec 2012
Chairman Panel
11
UNIKL
M.Eng Tech (Manuf.) A8065
Sept 2012
Chairman Panel
12
UMP
M Mech Eng PA1980
Apr 2012
Panel Member
13
TATI
B Manuf. Eng. Tech (Prod. Management PA2033
Apr 2012
Panel Member
14
UTeM
MS Mech. Eng (Energy Eng) PA1498
Dec 2011
Chairman
15
UTeM
MS Mech. Eng (Energy) PA1495
Dec 2011
Chairman
16
UTeM
M Mech. Eng (Product Design)
Nov 2011
Panel Member
17
UTP
MS Mech. Eng A8048 PhD Mech Eng A8419
July 2011
Chairman
18
TATI
B Manuf. Eng. Tech (Tooling) A8985
Jun 2011
Chairman
19
IPROM UNIKL
BEngTech Manuf. System A8783
May 2011
Chairman
20
UTeM
BTech Manuf. Eng (Product Design) PA0701
May 2011
Panel Member
21
UTeM
BTech Manuf. Eng (Process and Tech) PA0700
May 2011
Panel Member
22
IPROM UNIKL
BEngTech Tool and Die A10135
Feb 2011
Chairman
23
UTHM
BTech Mech. Eng (Manuf) PA0714
April 2011
Panel Member
24
UC Linton
BEng Mech. Eng. PA0410
March 2011
Panel Member
Page 58/62
25
UNIMAP
MS Manuf. System Eng PA0513
Feb 2011
Panel Member
26
City UC of Science and Tech
BEng Management PA0453
Feb. 2011
Panel Member
27
IPROM UNIKL
BEngTech Prod. Design A10835
Feb 2011
Chairman
28
MMU
MEng. Advanced Manuf. Eng A5835
April 2010
Chairman
29
UC SEGI Subang Jaya
BEng Mech Eng collaboration with Univ. of Sunderland A7814
April 2010
Chairman
30
UC SEGI Damansara
BEng Mech Eng collaboration with Univ. of Sunderland A7451
July 2010
Chairman
31
UNIMAP
BEng (Manuf. Eng) AA0361 BEng (Mech. Eng) AA0365 BEng (Prod. Design) AA0364
May 2010
Panel Member
32
UNIMAP
BEng (Metallurgical Eng) AA0363 BEng (Materials Eng) AA0362
May 2010
Chairman
33
Univ. of Nottingham in Malaysia (UNIM)
BEng (Mech Eng) A10469
May 2009
Panel Member
34
UNIKL-MFI
BEngTech Mechatronics KR10026
March 2009
Panel Member
35
KLIUC
Dip. Mech. Eng A5270
Nov. 2009
Chairman
36
UNITEN
MS Mech Eng KA9733
Nov 2008
Panel Member
37
College of WIT
HND Mech Eng A3197
Jun2008
Chairman
38
OUM
Dip. Mech Eng. A5716
August 2008
Panel Member
39
OUM
Bac. Manuf. Management KA9206
Jun2008
Panel Member
40
International UC INTI
UK Degree Transfer Programme – Mech Eng A8338
April 2008
Panel Member
Page 59/62
41
Int. UC Tech Twintech
M. Mech and Manuf. Eng KA8018
Feb 2007
Panel Member
42
WIT College
Dip. Mech Eng. A3037 HND Mech Eng A3197
July 2007
Panel Member
43
UTP
PhD Mech Eng KA8419
Aug 2007
Panel Member
44
UniKL-MSI
BTech Mech. Eng (Automotive) KA8201
June 2007
Panel Member
45
KLIUC
BTech Applied Automotive KA8381
July 2007
Panel Member
46
UNITEN
MS Mech Eng. KR8589
Aug 2007
Panel Member
47
UNIKL- Kampus Kota
BEng Tech Manuf. System KA8783
Oct 2007
Chairman
48
UNITEN
MS Mech. Eng A1186
April 2006
Panel Member
49
SEGI College Subang Jaya
B.Eng Mech. Eng. KA7451
June 2006
Panel Member
50
UniKL- MFI
Dip. Tech Welding Eng. A1481
May 2006
Chairman
51
PSDC
Dip. Mech/Mechatronics Eng. KA5716
Sept 2005
Panel Member
52
Ins. Teknologi Kulim
Dip. Design Eng. (Mekanikal)
March 2004
Panel Member
53
WIT College
Dip. Mech Eng SM3037
May 2004
Panel Member
54
GMI
Dip. Prod. Tech KA5787
Dec 2004
Panel Member
55
UniKL - MFI
Dip Eng Tech (Welding) KN5139)
May 2004
Panel Member
56
TPM Academy
BS (Eng)
Aug 2004
Panel Member
Page 60/62
57
UNITEN
PhD in Engineering
2002
Panel
58
Kolej Tafe Seremban
Dip. Electro-Mechanical Eng
2002
Panel
59
Inst Teknology Jaya/Univ. of Wales College Newport
B.Eng (Hons) Integrated Manufacturing Tech
2002
Panel
60
L&G Twintech Ins. Of Technology
Dip. Mechanical Eng
2000
Panel
d. No 1 2 3 4 5
Professional Affiliation Detail
Designation
Duration
Board of Engineers Malaysia (BEM) ASME The Institution of Engineers (IEM) New York Academy of Science Persatuan Pegawai Akademik
Registered Engineer 13986 Member Graduate Member M15210 Member Member
Since 1989 Since 2001 Since 1992 Since 2001 1995-Present
Page 61/62
Page 62/62
