p r o d u c t s • m o d el s • s e r i e s
INDEX
02
TMD Security
16
Product Development
04
CPK - Card Protection Kit
18
Models
06
TSM - Transmitters
22
CPK+ 6000 / 6001 series
08
SDK - Surface Detection Kit
24
Contact & Support
10
TVK - Tilt and Vibration Kit
12
ATK - Anti Trapping Kit
14
PCK - Premium Communication Kit
TMD SECURITY
Today, worldwide approximately 100.000 ATMs are secured with the
Knowledge & Innovation
CPK delivered by TMD Security. Our anti-skimming technology, with
If we analyze the performance of installed TMD products worldwide and
an unequalled track record, enables banks to secure over 3,6 billion
anticipate on the level of protection of products which are currently in
transactions per year.
development, we are confident about the future solutions TMD Security has to offer.
The essence
We notice that some companies release new products which attempt
Years of development have resulted in the high-end architecture of
to level with the anti-skimming technology of TMD Security. Even though
the CPK. Since the introduction of the CPK in 2004, TMD Security has
the benefits of those products appear to be the same, there are a few
grown into a well known, respected brand and global leader in the anti-
significant differences.
skimming market. All TMD products represent the latest generation of anti-skimming Our success is based on our vision: working with a motivated team of
technology; they are equipped with enhanced electromagnetic fields and
anti-skimming specialists, offering advice, training and on site services,
are also exclusively compatible with TMD Security software. But, above
supplying high-end and patented products, in order to be one step
all, TMD products protect against upcoming threats such as ‘stereo
ahead of skimming criminals.
skimming’.
2
The essence of knowledge & innovation
Our knowledge, service, support and the refined architecture and innovative aspects of our products are one of a kind. This is based on research, development and years of anti-skimming experience.
Another step ahead The anti-skimming market tends to focus on detection. It always has been our philosophy that detection alone is a passive solution. The CPK is an active solution. We strongly believe complete protection is essential. The strength of protection and detection combined in one solution is the strategy we follow. That is why TMD Security is another step ahead. As CEO of TMD Security I feel proud when looking back on all the efforts made by our team to make this company as successful as it is today and will be tomorrow. Sincerely, Cees Heuker of Hoek, CEO – TMD Security
3
CPK - Card Protection Kit Central core
CPK+ communication
The CPK+ is the central core of the CPK+ architecture. The CPK+
The CPK+ products have an unequalled proven track record and
provides all the connection possibilities to the transmitters, SDK, TVK,
provide protection to a still growing number of 3.65 billions transactions
ATK and the PC of the ATM.
per year globally. The CPK+ is the only anti-skimming product with full
The CPK+ is a modular security product based on the CPK architecture
remote device management capabilities. The CPK+ can send its status
defined by TMD Security and provides protection for the ATM against
update message via the PC in the ATM over the network to the central
skimming attempts:
alarm handling facility of a financial institution, and can be managed by using the same infrastructure. The CPK+ can also be connected to the
• Protection with the electromagnetic field(s)
alarm panel, and provide an alarm signal via dry contact.
• Detection of skimming equipment with the SDK The CPK+ series has been designed with the specific purpose of The CPK+ series is delivered in a kit that includes all necessary cabling,
protecting a financial self service terminal against criminal attacks.
modules, installation material and documentation to start up the CPK
Since the introduction, the products have been further developed to
after installation.
provide protection also against new forms of skimming.
4
Evolution of perfection Already in 2008 TMD Security investigated and announced to the financial institutions a new phenomenon called analogue skimming. Since the initial CPK developments TMD Security have raised the protection level offered by the CPK by optimizing the encryption and field strength of the electromagnetic protection field. The initial CPK 4000 was followed by the CPK 5000 series, and since 2008 by the CPK+ 6000 series. New sensors have been developed like the SDK and TVK to detect
CPK+ products can be fully integrated in all major brands of ATMs.
attacks. New transmitter types and smaller transmitters have also been
TMD Security has defined specific kits for all major ATM models
developed. These new products are a result of the continuous research
including the correct installation material for a specific model and brand.
and development activities at TMD Security, close co-operation with ATM manufacturers and the information gathered from skimming
The new CPK+ 6001 is unique in its class, and provides excellent
attempts at financial institutions globally.
protection against the latest form of skimming called stereo skimming.
5
TSM - Transmitters
TSM technology The products of the CPK+ series are based on a combination of active
it provides a higher protection level. The electromagnetic protection field
and passive protection. Active protection is implemented with the TSM
has been refined and is capable to provide excellent protection against
technology, passive protection with detection mechanisms.
the latest skimming methods.
The main advantage of the TSM technology is that the ATM can remain
Since the CPK+ products are security products TMD Security can not
in service during a skimming attempt and is always protected against
disclose detailed information on the working of the products in the
skimming with the electromagnetic field.
public domain.
TMD Security has developed and refined the TSM technology since its introduction. The audible noise from the TSM has been reduced in the generation of Loop Transmitters (TSM 6001) and at the same time
6
Co-operation with manufacturers Nowadays, the development of skimming techniques is dynamic and
• First generation, provide protection against digital skimming
more and more geared to professional production level. In order to
• Second generation provide protection against digital and analogue
keep up the level of protection offered by TMD products, manufacturers and TMD Security work together on development of solutions for excellent integration in future ATMs.
skimming • Third generation - the introduction of the Loop Transmitter (TSM 6000) • Optimization of size and shape of the loop transmitters,
In close co-operation with major ATM manufacturers the size and shape of transmitters have been optimized. The transmitters must be installed in the place defined for specific ATM models to ensure best possible protection against skimming.
specific models to adapt to the bezel of ATMs • TSM 6001 based on loop technology, provides protection against analogue, digital and stereo skimming • Bezels with complete integrated Loop TSM and sensor technology for detection
The development of transmitters has passed through several stages: 7
SDK - Surface Detection Kit
Detection from the inside The SDK sensors produced by TMD Security are complex intelligent
by the SDK module. Detection takes place only inside a well-defined
sensors with precise filtering, managed by a separate controller module
field of operation, taking into consideration the materials used for
with a dedicated processor and connected to the CPK+ anti-skimming
construction of the ATM fascia. TMD Security has defined the place of
device to provide information on eventual skimming threats to the ATM.
installation of the SDK sensor for all supported models of ATMs and
The algorithms used in the SDK module are programmed to recognise
provides different SDK sensors for different types of ATMs, in some
skimming devices, made from all kinds of different materials.
instances integrated in the bezel of the card reader.
The algorithms used to manage the information from the SDK sensor
It is also important to realize that the combination of TSM and CPK+ will
maintain a correct balance between false and real detects, simple
protect the ATM against skimming at all times. The information provided
foreign objects and skimming devices. This balance is reached through
by the SDK sensor is for information and alarming purposes only when
a complex set of algorithms, computations and adjustments performed
used in a Model 2 kit.
8
• The CPK+ 6000/6001 series Models 2 and 3 are always equipped with the SDK technology • In the Model 3 kit, the SDK sensor information will be used to protect the ATM in a different way The difference between Model 2 and Model 3 is based on the type of card reader. An ATM with a motorized card reader is protected with a CPK+ Model 2 kit, while an ATM with a DIP card reader is protected with a Model 3 kit.
9
10
TVK - Tilt and Vibration Kit
Drilling & sawing detection The TVK, Tilt and Vibration Kit, is designed to prevent successful skimming attacks where the criminal attempts to install a skimming device in direct contact with the pre-head or main reading head of the
• The TVK reports status changes via the USB port of the CPK+ 6000/6001 series main unit • The TVK is available for all brands of ATMs with motorized or
card reader inside the ATM/SST. The TVK also prevents successful
DIP card readers. The TVK provides extra protection to the ATM
burglary attempts on the fascia of the ATM to deactivate anti-skimming
by monitoring the TSM
equipment. The TVK will detect drilling, cutting and sawing in the fascia.
• The TVK can be adjusted to Model 1, Model 2 and Model 3 of the CPK+ 6000/6001 series
Further information on security products can be disclosed after a formal agreement with confidentiality restrictions.
11
ATK - Anti Trapping Kit
Lebanese loop detection The ATK is an optional item that can be added to the CPK+ 6000/6001
The international amount of card trapping incidents by criminals has
for motorized card readers. The ATK consists of the necessary cabling,
increased dramatically again since 2009.
a motor unit, a controller unit and an information bulletin with installation
Card trapping is an older type of fraud on ATMs, also known as
instructions.
Lebanese loop fraud, that has returned after many years. With card trapping criminals try to obtain the bank card from a customer while he
The ATK will detect card trapping attempts. When the ATK detects card
is performing a transaction on an ATM, whereas skimming criminals try
trapping, a metal stud will be lowered in the card travelling path in the
to copy the details from the bank card.
card reader and will lock any bank cards present at that time. The ATK will also generate an alarm and will communicate the alarm
Two types of ATK kits are available from TMD Security for motorized
via the regular communication channels of the CPK+.
card readers, one kit for Sankyo card readers and one kit for Omron card readers.
12
Lebanese loop The comeback of an old type of card fraud
13
PCK - Premium Communication Kit
Monitoring & remote device management
Principle of operation
The PCK7, Premium Communication Kit, is a very compact high speed
The PCK7 contains advanced communication micro-electronics to
communication device designed to enable monitoring and remote
establish a protected IP based communication channel with a PPS
device management of CPK+ 6000/6001 anti-skimming devices.
Monitoring Server. The communication is encrypted with IPSEC, with
The PCK will enable IP communication with the CPK+ 6000/6001 via
pre-shared encryption keys to be defined by the bank owning the ATMs.
USB without the risk of compromising the security of the sensitive data
The PCK7 facilitates secured full remote device management from
in the ATM in an ATM network environment.
a PPS Monitoring Server.
The PCK7 is available for all brands (Motorized and DIP) of ATMs and SSTs. PCK7 can be used with all CPK models of the CPK+ 6000/6001 series.
14
BRANCH NETWORK
BANK NETWORK CENTRAL LOCATION Monitoring application bank
TSM SDK TVK
CPK+ 6001
ATK
Premium Communication Kit
LAN
Firewall
Internet
Firewall
LAN
Monitoring workstations
Monitoring PPS SW/HW
ATM LOCATION
The PCK7 enables users to send and receive all commands and status
network. The PCK7 does not require any logical interface with the ATM.
messages with a CPK+ 6000/6001 series with parameters in native
The Premium Communication Kit does not interfere with the security
format, including remote update of the firmware of the CPK+ 6000/6001
layers of the ATM. The communication re-uses existing infrastructure,
series. The firmware of the PCK7 itself is also remote updateable. The
with logical separation. The communication between the PCK7 and the
communication with the network concentrator and server are monitored
central network concentrator is based on routing and does not support
by the PCK7.
NAT. The limitation for routing only is related to the encryption of the
In case the connection with the server or network concentrator is lost,
communication.
the PCK7 will automatically set-up new connections when possible. PCK7 is to be used in conjunction with a VC7400 network concentrator The PCK7 has been designed to enable network communication with
and the PPS Monitoring Server.
the CPK+ 6000/6001 series without limitations of the ATM on an ATM
15
Product development
TMD Security is actively provided with information by sources worldwide on ATM fraud attempts. Organizations gathering information from financial institutions and law enforcement share their updates with us, as well as our partners and customers.
Shared information The information is shared with the Research & Development Department. The specialists at R&D study and combine this information on fraud continuously and check with the industry if adequate solutions are at hand, or need to be developed. The R&D Department always takes in consideration that new solutions must be applicable for multi-vendor ATMs.
16
Innovating today for protection of tomorrow
Product evaluation Current studies under evaluation are for example the Cash Trapping Kit
The same bank card is later used for performing the transactions.
and the Door Popper Kit.
In some countries the banks have changed the infrastructure for the lobby because of lobby door skimming.
CTK A solution to protect an ATM against cash trapping attempts is under
Solutions in production
study, after information was received on the increasing number of cash
When there is a genuine demand for products to solve a fraud issue
trapping incidents globally. Cash trapping is a form of fraud that also
under study, the study will be translated into a solution with products
was practised by criminals in the second half of the 90’s.
when technically feasible and economically within reach.
DPK Lobby door skimming is a form of skimming that can be applied by criminals at banks where outside regular business hours the lobby door is opened by use of the customers bank card with a card reader.
17
Models The knowledge build-up at TMD Security to select the best solution
TMD Security solutions, because the electromagnetic field emitted by
from our product portfolio for your ATM estate can be used to assist in
the TSM always protects the ATM against skimming. When someone is
making the right decision on the TMD Security CPK+ kits to be installed.
responsible for an ATM, one must be aware of what is occurring.
TMD Security have set-up a library with infosheets per ATM type that describe the kits to be used for a particular type of ATM. The infosheets
The TSM 6001 provides additional protection against stereo skimming.
provide information on the possible solutions and options.
It is possible to upgrade CPK+ 6000 installed kits or CPK+ with 6000 Loop TSM to 6001 security level by adding the TSM 6001.
• Model 3 is only for ATMs with DIP card reader • Model 1 and Model 2 are for motorized card readers
TMD Security does advise to always use the TVK, Tilt and Vibration Kit, as additional protection. In case of burglary attempts on the fascia of
The difference between Model 1 and Model 2 exists in the additional
the ATM, with the aim of skimming, the TVK will trigger an alarm and
information provided by the SDK. In our opinion it is very important
the card reader of the ATM will be disabled thus preventing successful
to know if criminals are attempting to circumvent the security system
skimming attempts.
of your ATMs, and detection should be a requirement. The detection
The TVK is a protection mechanism like the TSM, while the SDK is
of skimming devices will not take the ATM out of service with the
a detection mechanism.
18
How to choose the solution that fits best with your ATM estate?
r series mitte 00 LT 0 6 + Trans er P O CPK LO r Driv e ly t n it o m t s c n Conne op Tra 00 Lo 0 6 C with
Configuration Coloured labels on the CPK+ 6000/6001 main unit provide information on the configuration of the unit because it is very important to connect the correct transmitter type to a CPK+ 6000/6001 unit:
CPK+ 6000 RX series Connect only T-60070-ALD TSM
• A bright green label indicates that the CPK+ is configured for the 6001 Loop TSM
with Transmitter extension cable CPK+ 6001 LT se Conne ries ct only L OOP with C 6001 6001 TSM LoopT ransm itter D river
• A bright yellow label indicates that the CPK+ is configured for the 6000 Loop TSM • A bright red label indicates that the CPK+ is configured for 6000 in RX mode, with conventional TSM
19
Models
CPK+ 6000/6001 Model 1 Model 1 provides protection with the patented transmitter technology and is for motorized card readers only. Model 1 is also available with the new Loop TSM technology and with the TSM 6001 to protect against stereo skimming.
Principle of operation The CPK+ TSM generates a protective shield around the card entry slot by emitting a coded signal. The coded signal disrupts the information that a skimmer could read. CPK+ 6000/6001 Model 1 provides protection against analogue and digital skimming. Protection against stereo skimming is also provided in combination with the TSM 6001. The ATM will remain in regular service during and after skimming attacks without the risk of compromising sensitive card data. TMD Security does advise to combine a CPK+ 6000/6001 Model 1 with a TVK to detect burglary attempts on the fascia of the ATM.
20
CPK+ 6000/6001 Model 2
CPK+ 6000/6001 Model 3
Model 2 provides protection with the patented transmitter technology
CPK+ 6000/6001 Model 3 is especially designed for the ATMs with
and is only available for motorized card readers. Model 2 is also available
a non-motorized / DIP card (manual) reader. The transmitter protects
with the new Loop TSM technology and with the TSM 6001 to protect
the ATM/SST against skimming attempts with skimming devices placed
against stereo skimming. The SDK sensor, included in Model 2, detects
over the bezel of the dip card reader. Model 3 is also equipped like the
skimming devices from all materials, and will generate a silent alarm in
Model 2 with a SDK sensor.
case the sensor is triggered during a skimming attack.
Principle of operation Principle of operation
The SDK sensor, included in Model 3, detects skimming devices from all
The CPK+ TSM generates a protective shield around the card entry slot
materials and will generate a silent alarm in case the sensor is triggered.
by emitting a coded signal. The coded signal disrupts the information
The transmitter is always in stand-by mode, a skimming detection will
that a skimmer could read. CPK+ 6000/6001 Model 2 provides
activate the transmitter. The transmitter will automatically return in
protection against analogue and digital skimming. Protection against
stand-by when the skimming device is removed.
stereo skimming is also provided in combination with the TSM 6001. In case of detection of skimming devices a silent alarm will be generated
Silent alarms are provided via dry contact and via USB messages in
and reported via dry contact and/or USB messages. The ATM will
case of skimming attempts. During a skimming attack no transactions
remain in regular service during and after skimming attacks. A logging
can be made until the skimming equipment has been removed.
mechanism will provide information on the number of attacks on the
TMD Security does advise to combine a CPK+ 6000/6001 Model 3
LCD display of the CPK+ 6000/6001.
with a TVK to detect burglary attempts on the fascia of the ATM.
TMD Security does advise to combine a CPK+ 6000/6001 Model 2 with a TVK to detect burglary attempts on the fascia of the ATM.
Option: for ATMs with motorized card readers is the ATK available. 21
CPK+ 6000 /6 001 series Special features
CPK+ 5005
CPK+ 6000 RX
CPK+ 6000 LT
CPK+ 6001
••
•••
•••
•••
••
•••
•••
••
•••
•
•••
protection against digital skimming protection against analogue skimming protection against analogue stereo skimming protection against digital stereo skimming multi vendor
•
•
•
•
SDK technology includes silent alarm
•
•
•
•
real time status updates via USB
•
•
•
support optional Tilt and Vibration Kit
•
•
•
support optional Anti Trapping Kit
•
•
•
The compatibility overview of the different generations of products
RX series to CPK+ LT technology and CPK+ 6001 technology. For the
provides information on the present features and functions. The overview
upgrade from RX to LT technology the existing firmware and transmitter
also provides information on the possibilities to upgrade the CPK+ 6000
must be replaced with LT firmware, a loop transmitter driver and a loop
22
CPK+ 5005
CPK+ 6000 RX
CPK+ 6000 LT
CPK+ 6001
invisible from outside
•
•
•
•
protection for motorized and DIP card readers
•
•
•
•
protection for DIP card readers
•
•
•
•
General features
upgrade to Loop Technology (LT)
•
upgrade to CPK+ 6001
•
•
USB communication
•
•
•
•
•
•
secured remote device management
•
•
•
advance commands and reply messages
•
•
•
alarm relay output
•
attack counter on display for standalone
•
•
•
•
centralized firmware update
•
•
•
•
CPK upgrades via USB from host
•
•
•
sensor equipped with stability system
•
•
•
•
•
advanced loop TSM technology
transmitter. For upgrade to CPK+ 6001 technology the existing loop transmitter and loop
good
•
transmitter driver must be replaced with the 6001 TSM and 6001 driver. It is also possible
very good excellent
••
to perform a direct upgrade from CPK+ 6000 RX to CPK+ 6001.
•••
23
Contact & Support
Online support
Headquarters
TMD Support
Our website, www.tmdsecurity.com, offers you all the latest information
TMD Security GmbH
Randstad 21-39
about our products and services. In the highly secured support section,
Rheinweg 1
1314 BG Almere
TMD Security presents infomercials about the essence of the protection
CH-8200 Schaffhausen
The Netherlands
offered by TMD anti-skimming products. Partners and customers have
Switzerland
exclusive access to our archive of product documentation.
Tel: +31-36-751 94 00 Fax: +31-36-751 94 99
If you are interested in our online infomercials and support section,
[email protected]
log on to our website with the following codes:
www.tmdsecurity.com
name: guest password: tmdtour
24
w w w. t m d s e c u r i t y. c o m
© copyright 2011
