Prices valid from April 2013
PRICE LIST 2013
CZECH REPUBLIC CONDITIONS OF SALE Currency: Euro Carriage: ex works our factory in Miralduolo (PG) Italy Packing: included in price Payment: anticipated before shipment Claims: Returned merchandise will only be accepted within 6 months of delivery date and following our written authorization. All authorized returns must be forwarded carriage paid and in full standard packs in resaleable condition. Providing that returned goods are received back in perfect condition , a credit note amounting to 70% of invoiced total will be raised.
Index CLASSICA Technical information Wood Species Oak Oak Michelangelo Canadian Maple Cabreuva KM31 Doussie Iroko Teak Wenge Maple Sycomorus Cherry Steamed Beech Jatoba Morado Additional wood working Accessories Cleaning and maintenance products
ATELIER Wood Species and Collections Réserve Doc Fahrenheit Quattrocento italiano Ancien Antique Accessories Cleaning and maintenance products
NATURAL GENIUS Wood Species and Collections Medoc Quadrone Vibrazioni Slide Foxtrot Accessories Cleaning and maintenance products Ecological, environment and product quality Wood: a living material
Margaritelli S.p.A. reserves the right to alter the features or details of the above at any time and without notice.
2
classica
3
EXTRA-WIDE BOARDS
HARDWOOD THICKNESS: 5 mm SUPPORT THICKNESS: 9 mm TOTAL THICKNESS: 14 mm SUPPORT: birch wood WEIGHT: 10 kg/m2
*
THERMAL RESISTANCE: 0,081 m2 K / W *
HARDWOOD THICKNESS: 3,5 mm SUPPORT THICKNESS: 9 mm TOTAL THICKNESS: 12,5 mm SUPPORT: birch wood WEIGHT: 9 kg/m2 * THERMAL RESISTANCE: 0,072 m2 K / W *
HARDWOOD THICKNESS: 2,5 mm SUPPORT THICKNESS : 7,5 mm TOTAL THICKNESS: 10 mm SUPPORT: birch wood WEIGHT: 7,5 kg/m2 * THERMAL RESISTANCE: 0,056 m2 K / W *
* Approximate indications which refer to Oak. All products of Classica section are suitable for glued down installation. They may be installed with underfloor heating and cooling system. The features and specifications of the products stated in this document may be subject to alterations.
4
TRADITIONAL SIZES
HARDWOOD THICKNESS: 5 mm SUPPORT THICKNESS : 9 mm TOTAL THICKNESS: 14 mm SUPPORT: birch wood WEIGHT: 10 kg/m2 * THERMAL RESISTANCE: 0,081 m2 K / W
*
HARDWOOD THICKNESS: 5 mm SUPPORT THICKNESS : 9 mm TOTAL THICKNESS: 14 mm SUPPORT: birch wood WEIGHT: 10 kg/m2 * THERMAL RESISTANCE: 0,081 m2 K / W
*
HARDWOOD THICKNESS: 5 mm SUPPORT THICKNESS: 6 mm TOTAL THICKNESS: 11 mm SUPPORT: birch wood WEIGHT: 8 kg/m2 * THERMAL RESISTANCE: 0,065 m2 K / W *
HARDWOOD THICKNESS: 3,5 mm SUPPORT THICKNESS: 7,5 mm TOTAL THICKNESS: 11 mm SUPPORT: birch wood WEIGHT: 8 kg/m2 * THERMAL RESISTANCE: 0,062 m2 K / W *
HARDWOOD THICKNESS: 3,5 mm SUPPORT THICKNESS: 6 mm TOTAL THICKNESS: 9,5 mm SUPPORT: birch wood WEIGHT: 6,4 kg/m2 * THERMAL RESISTANCE: 0,054 m2 K / W *
5
FINISHES XPLUS
High-resistance solvents-free varnish, with a satin appearance. The finish features Crystalcare antibacterial technology.
NATURPLUS
Solvents-free varnish, characterized by a natural finish aspect. It is applied after a brushing treatment of the surface. The finish features Crystalcare antibacterial technology.
NATURPLUS2
Solvents-free varnish, characterized by a natural finish aspect. It is applied after a brushing treatment of the surface. The Naturplus2 version, compared to Naturplus, highlights a sculptural pore effect and a less glossy surface. The finish features Crystalcare antibacterial technology.
INVISIBLE TOUCH
Water-based finish, has the characteristic of protecting the wood whilst maintaining the typical appearance and color of an untreated surface. The finish features Crystalcare antibacterial technology.
OLEONATURE
Natural oils-based finish air-dried, applied to a brushed surface. It is characterized by high protection and easy maintenance, thanks to a special treatment as last coating application.
NATIF
Natural oils-based finish air-dried. It is characterized by a highly natural, matt appearance and the maintenance of a typical open-pore wood which requires periodic nourishment.
PRE-SANDED
Presanded surface, ready to be finished on site after installation.
GRADES Elite / Elegant
Mixed grain, substantially homogeneous colour in relation to the characteristics of the species. In some woods possible presence of small knots.
Fibramix
Mixed grain. Some boards may have variegated colour and knots. In the collection "extra-wide boards" filled and open knots may be included.
Dekora
Mixed grain and variegations of colour. Possible presence of knots according to the characteristics of the wood species.
Country
Mixed grain and variegations of colour. Large presence of knots including consolidated and open ones.
Wood is a natural and variegated material, therefore the descriptions above, as well as photos and samples displayed do not fully represent the full colours'range in a comprehensive way, the textures and peculiarities of each indidividual product. The above descriptions, photos and samples should therefore be considered as indicative. The features and specifications of the products stated in this document may be subject to alterations.
6
PURO
TAMARINDO
CARVI
BIANCOSPINO
MONTBLANC
LINO
CASHMERE
CRETA
8
MAPLE SYCOMORUS
CHERRY
CANADIAN MAPLE
DOUSSIE
STEAMED BEECH
IROKO
TEAK
JATOBA
MORADO
CABREUVA KM31
WENGE
9
OAK/ EXTRA-WIDE BOARDS
OAK FROM FONTAINES XPLUS
NATURPLUS2
INVISIBLE TOUCH
OLEONATURE
144,45 126,15 111,00
149,00 130,70 115,55
146,25 128,00 112,80
139,05 120,80 105,60
107,90 94,90 111,55 93,25 82,10
112,45 99,50 116,10 97,80 86,65
109,70 96,75 113,35 95,10 83,90
102,50 89,55 106,15 87,90 76,70
93,25 82,10
97,80 86,65
95,10 83,90
87,90 76,70
82,30 72,40
86,85 76,95
84,10 74,25
76,90 67,05
82,30 72,40
86,85 76,95
84,10 74,25
76,90 67,05
75,00 65,80
79,55 70,40
76,80 67,65
69,60 60,40
67,30 63,25
71,85 67,85
69,10 65,10
61,90 57,90
230 lengths total thickness
1500-2400 mm
14 mm
190
hardwood thickness
lengths
5 mm
1500-2400 mm
140 lengths 1200-2100 mm
NATIF
PRE-SANDED
190 lengths total thickness
1500-2400 mm
12,5 mm
140
hardwood thickness
lengths
3,5 mm
1200-2100 mm
190 lengths total thickness
1500-2400 mm
10 mm
140
hardwood thickness
lengths
2,5 mm
1500-1800 mm
140 smart lengths 800-1200 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT
FIBRAMIX
COUNTRY
• The products in the "Extra-wide boards" collection, unless otherwise specified,
• Some products in this pricelist are manufactured upon request.
are made with a small bevel on all four edges.
Please check availability and delivery time with the sales department
• The products are supplied in random lengths according to availability.
before placing the order.
In 190 mm width lengths between 1800 and 2100 mm are mainly available.
• Listone and Plank are also available with sharp edges (without chamfer)
• The material supplied may incorporate up to 10% of shorter lenghts
with an additional surcharge of 5,35 €/m2.
compared to the ones mentioned in the price list.
Plank 190 and Plank 230 with sharp edges have a total thickness of 16 mm
• Orders of one fixed length will be individually evaluated. Once accepted a
instead of 14 mm.
surcharge of 20% will be applied.
TECHNICAL INFORMATION
ADDITIONAL
page 4
WOOD WORKING
CLEANING AND MAINTENANCE
page 31
ACCESSORIES
page 32
PRODUCTS
page 36
10
OAK/ TRADITIONAL FORMATS
OAK FROM FONTAINES XPLUS
125
NATURPLUS2
INVISIBLE TOUCH
OLEONATURE
NATIF
PRE-SANDED
107,55 103,05 *
total thickness 14 mm
lengths
hardwood thickness
800-1500 mm
94,65
90
99,40
5 mm
total thickness 14 mm
lengths
hardwood thickness
490-1200 mm
87,50
5 mm
70 total thickness 11 mm
lengths
hardwood thickness
350-800 mm
5 mm
90 total thickness 11 mm
lengths
hardwood thickness
490-1000 mm
79,55 73,15 *
77,70
75,00
70,00
3,5 mm
70 total thickness 9,5 mm
lengths
hardwood thickness
350-600 mm
62,15
62,15 *
67,30
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT
FIBRAMIX
DEKORA
• The products in the "Traditional formats" collection are made with sharp
• Orders of one fixed length will be individually evaluated. Once accepted a
edges (without chamfer).
surcharge of 20% will be applied.
• Material is supplied in random lengths subject to availability.
• Some products in this pricelist are manufactured upon request.
Listone 90 may occasionally be supplied with length 1200 mm, Corona 70
Please check availability and delivery time with the sales department
with length 800 mm.
before placing the order.
• The material supplied may incorporate up to 10% of shorter lenghts
* Products supplied in Naturplus finish.
compared to the ones mentioned in the price list. TECHNICAL INFORMATION
ADDITIONAL
page 4
WOOD WORKING
CLEANING AND MAINTENANCE
page 31
ACCESSORIES
page 32
PRODUCTS
page 36
11
OAK MICHELANGELO / EXTRA-WIDE BOARDS
EICHE AUS FONTAINES XPLUS
230 lengths total thickness
1500-2400 mm
14 mm
190
hardwood thickness
lengths
5 mm
1500-2400 mm
140 lengths 1200-2100 mm
NATURPLUS2
INVISIBLE TOUCH
OLEONATURE
151,75 133,45 118,30
156,30 138,05 122,85
115,20 102,25 118,85 100,55 89,40
119,75 106,80 123,40 105,15 93,95
100,55 89,40
105,15 93,95
89,60 79,70
94,15 84,30
89,60 79,70
94,15 84,30
82,30 73,15
86,85 77,70
74,60 70,55
79,15 75,15
NATIF
PRE-SANDED
190 lengths total thickness
1500-2400 mm
12,5 mm
140
hardwood thickness
lengths
3,5 mm
1200-2100 mm
190 lengths total thickness
1500-2400 mm
10 mm
140
hardwood thickness
lengths
2,5 mm
1500-1800 mm
140 smart lengths 800-1200 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT
FIBRAMIX
COUNTRY
• The products in the "Extra-wide boards" collection, unless otherwise specified,
Plank 190 and Plank 230 with sharp edges have a total thickness of 16 mm
are made with a small bevel on all four edges.
instead of 14 mm.
• The products are supplied in random lengths according to availability.
• All the products of the Michelangelo collection are manufactured upon request.
In 190 mm width lengths between 1800 and 2100 mm are mainly available.
The minimum order quantity is 35 m2. A 40% deposit is required for all orders.
• The material supplied may incorporate up to 10% of shorter lenghts
Please check availability and delivery time with the sales department
compared to the ones mentioned in the price list.
before placing the order.
• Orders of one fixed length will be individually evaluated. Once accepted a surcharge of 20% will be applied. • Listone and Plank are also available with sharp edges (without chamfer) with an additional surcharge of 5,35 €/m2. TECHNICAL INFORMATION
ADDITIONAL
page 4
WOOD WORKING
CLEANING AND MAINTENANCE
page 31
ACCESSORIES
page 32
PRODUCTS
page 36 12
OAK MICHELANGELO / TRADITIONAL FORMATS
EICHE AUS FONTAINES XPLUS
NATURPLUS2
INVISIBLE TOUCH
OLEONATURE
NATIF
PRE-SANDED
125 total thickness 14 mm
lengths
hardwood thickness
800-1500 mm
5 mm
90 total thickness 14 mm
lengths
hardwood thickness
490-1200 mm
5 mm
70 total thickness 11 mm
lengths
hardwood thickness
350-800 mm
5 mm
90 total thickness 11 mm
lengths
hardwood thickness
490-1000 mm
84,10 *
3,5 mm
70 total thickness 9,5 mm
lengths
hardwood thickness
350-600 mm
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT
FIBRAMIX
• The products in the "Traditional formats" collection are made with sharp
DEKORA
edges (without chamfer).
• All the products of the Michelangelo collection are manufactured upon request. The minimum order quantity is 35 m2. A 40% deposit is required for all orders.
• Material is supplied in random lengths subject to availability.
Please check availability and delivery time with the sales department
Listone 90 may occasionally be supplied with length 1200 mm, Corona 70
before placing the order.
with length 800 mm. • The material supplied may incorporate up to 10% of shorter lenghts compared to the ones mentioned in the price list.
* Product supplied in Naturplus finish. Only available for
• Orders of one fixed length will be individually evaluated. Once accepted a
Montblanc and Biancospino colours.
surcharge of 20% will be applied. TECHNICAL INFORMATION
ADDITIONAL
page 4
WOOD WORKING
CLEANING AND MAINTENANCE
page 31
ACCESSORIES
page 32
PRODUCTS
page 36
13
CANADIAN MAPLE / EXTRA-WIDE BOARDS
CANADIAN MAPLE EICHE AUS FONTAINES XPLUS
NATURPLUS2
INVISIBLE TOUCH
OLEONATURE
NATIF
PRE-SANDED
230 lengths total thickness 14 / 16 mm
*
1500-2400 mm
190
hardwood thickness
lengths
5 mm
1500-2400 mm
140
184,70 **
157,45 **
lengths 1200-2100 mm
190 lengths total thickness
1500-2400 mm
12,5 mm
140
hardwood thickness
lengths
3,5 mm
1200-2100 mm
190 lengths total thickness
1500-2400 mm
10 mm
140
hardwood thickness
lengths
2,5 mm
1500-1800 mm
140 smart lengths 800-1200 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT
FIBRAMIX
COUNTRY
• The products in the "Extra-wide boards" collection, unless otherwise specified,
Please check availability and delivery time with the sales department
are made with a small bevel on all four edges.
before placing the order.
• The products are supplied in random lengths according to availability. In 190 mm width lengths between 1800 and 2100 mm are mainly available.
* The product Plank 140 has a total thickness of 14 mm, Plank 190
• The material supplied may incorporate up to 10% of shorter lenghts
a total thickness of 16 mm.
compared to the ones mentioned in the price list. • Orders of one fixed length will be individually evaluated. Once accepted a
** These products are only supplied with sharp edges (without
surcharge of 20% will be applied.
chamfer). For this product the application of Sigilplus is compulsory
• Some products in this pricelist are manufactured upon request.
(s. "Cleaning and maintenance products").
TECHNICAL INFORMATION
ADDITIONAL
page 4
WOOD WORKING
CLEANING AND MAINTENANCE
page 31
ACCESSORIES
page 32
PRODUCTS
page 36
14
CANADIAN MAPLE / TRADITIONAL FORMATS
CANADIAN MAPLE EICHE AUS FONTAINES XPLUS
NATURPLUS2
INVISIBLE TOUCH
OLEONATURE
NATIF
PRE-SANDED
125 total thickness 14 mm
lengths
hardwood thickness
800-1500 mm
5 mm
90 total thickness 14 mm
lengths
hardwood thickness
490-1200 mm
5 mm
104,25 *
70 total thickness 11 mm
lengths
hardwood thickness
350-800 mm
93,85 *
5 mm
90 total thickness 11 mm
lengths
hardwood thickness
490-1000 mm
111,90 *
3,5 mm
70 total thickness 9,5 mm
lengths
hardwood thickness
350-600 mm
93,85 *
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT
FIBRAMIX
DEKORA
• The products in the "Traditional formats" collection are made with sharp
• Orders of one fixed length will be individually evaluated. Once accepted a
edges (without chamfer).
surcharge of 20% will be applied.
• Material is supplied in random lengths subject to availability.
• Some products in this pricelist are manufactured upon request.
Listone 90 may occasionally be supplied with length 1200 mm, Corona 70
Please check availability and delivery time with the sales department
with length 800 mm.
before placing the order.
• The material supplied may incorporate up to 10% of shorter lenghts
* For this product the application of Sigilplus is compulsory
compared to the ones mentioned in the price list.
(s. "Cleaning and maintenance products").
TECHNICAL INFORMATION
ADDITIONAL
page 4
WOOD WORKING
CLEANING AND MAINTENANCE
page 31
ACCESSORIES
page 32
PRODUCTS
page 36
15
CABREUVA KM31/ EXTRA-WIDE BOARDS
AHORN KANADISCH EICHE AUS FONTAINES XPLUS
NATURPLUS2
INVISIBLE TOUCH
OLEONATURE
NATIF
PRE-SANDED
230 lengths total thickness 14 / 16 mm
*
1500-2400 mm
190
hardwood thickness
lengths
5 mm
1500-2400 mm
214,90 ***
140 lengths
192,85 **
194,70
1200-2100 mm
190 lengths total thickness
1500-2400 mm
12,5 mm
140
hardwood thickness
lengths
3,5 mm
1200-2100 mm
190 lengths total thickness
1500-2400 mm
10 mm
140
hardwood thickness
lengths
2,5 mm
1500-1800 mm
140 smart lengths 800-1200 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT
FIBRAMIX
COUNTRY
• The products in the "Extra-wide boards" collection, unless otherwise specified,
Please check availability and delivery time with the sales department
are made with a small bevel on all four edges.
before placing the order.
• The products are supplied in random lengths according to availability. In 190 mm width lengths between 1800 and 2100 mm are mainly available.
* The product Plank 140 has a total thickness of 14 mm, Plank 190
• The material supplied may incorporate up to 10% of shorter lenghts
a total thickness of 16 mm.
compared to the ones mentioned in the price list.
**
• Orders of one fixed length will be individually evaluated. Once accepted a
chamfer).
surcharge of 20% will be applied.
*** Occasionally available.
These products are only supplied with sharp edges (without
• Some products in this pricelist are manufactured upon request. TECHNICAL INFORMATION
ADDITIONAL
page 4
WOOD WORKING
CLEANING AND MAINTENANCE
page 31
ACCESSORIES
page 32
PRODUCTS
page 36 16
CABREUVA KM31 / TRADITIONAL FORMATS
AHORN KANADISCH EICHE AUS FONTAINES XPLUS
NATURPLUS2
INVISIBLE TOUCH
OLEONATURE
NATIF
PRE-SANDED
125 total thickness 14 mm
lengths
hardwood thickness
800-1500 mm
5 mm
90 total thickness 14 mm
lengths
hardwood thickness
490-1200 mm
5 mm
70 total thickness 11 mm
lengths
hardwood thickness
350-800 mm
5 mm
90 total thickness 11 mm
lengths
hardwood thickness
490-1000 mm
123,95
125,75
3,5 mm
70 total thickness 9,5 mm
lengths
hardwood thickness
350-600 mm
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT
FIBRAMIX
DEKORA
• The products in the "Traditional formats" collection are made with sharp
• Orders of one fixed length will be individually evaluated. Once accepted a
edges (without chamfer).
surcharge of 20% will be applied.
• Material is supplied in random lengths subject to availability.
• Some products in this pricelist are manufactured upon request.
Listone 90 may occasionally be supplied with length 1200 mm.
Please check availability and delivery time with the sales department
• The material supplied may incorporate up to 10% of shorter lenghts
before placing the order.
compared to the ones mentioned in the price list. TECHNICAL INFORMATION
ADDITIONAL
page 4
WOOD WORKING
CLEANING AND MAINTENANCE
page 31
ACCESSORIES
page 32
PRODUCTS
page 36
17
DOUSSIE / EXTRA-WIDE BOARDS
AHORN KANADISCH EICHE AUS FONTAINES XPLUS
NATURPLUS2
INVISIBLE TOUCH
OLEONATURE
NATIF
PRE-SANDED
230 lengths total thickness 14 / 16 mm
*
1500-2400 mm
165,40 **
190
hardwood thickness
lengths
5 mm
1500-2400 mm
148,75 **
140 lengths 1200-2100 mm
190 lengths total thickness
1500-2400 mm
12,5 mm
140
hardwood thickness
lengths
3,5 mm
1200-2100 mm
190 lengths total thickness
1500-2400 mm
10 mm
140
hardwood thickness
lengths
2,5 mm
1500-1800 mm
140 smart lengths 800-1200 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT
FIBRAMIX
COUNTRY
• The products in the "Extra-wide boards" collection, unless otherwise specified,
• Some products in this pricelist are manufactured upon request.
are made with a small bevel on all four edges.
Please check availability and delivery time with the sales department
• The products are supplied in random lengths according to availability.
before placing the order.
In 190 mm width lengths between 1800 and 2100 mm are mainly available. • The material supplied may incorporate up to 10% of shorter lenghts
* The product Plank 140 has a total thickness of 14 mm, Plank 190
compared to the ones mentioned in the price list.
a total thickness of 16 mm.
• Orders of one fixed length will be individually evaluated. Once accepted a
** Products supplied in Naturplus finish and sharp edges
surcharge of 20% will be applied.
(without chamfer).
TECHNICAL INFORMATION
ADDITIONAL
page 4
WOOD WORKING
CLEANING AND MAINTENANCE
page 31
ACCESSORIES
page 32
PRODUCTS
page 36 18
DOUSSIE / TRADITIONAL FORMATS
AHORN KANADISCH EICHE AUS FONTAINES XPLUS
125 total thickness 14 mm
lengths
hardwood thickness
800-1500 mm
NATURPLUS2
INVISIBLE TOUCH
OLEONATURE
NATIF
PRE-SANDED
127,15 111,90
5 mm
90 total thickness 14 mm
lengths
hardwood thickness
490-1200 mm
5 mm
70 total thickness 11 mm
lengths
hardwood thickness
350-800 mm
81,90 73,75
5 mm
90 total thickness 11 mm
lengths
hardwood thickness
490-1000 mm
101,65
101,65 *
103,45
73,75
73,75 *
78,85
3,5 mm
70 total thickness 9,5 mm
lengths
hardwood thickness
350-600 mm
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT
FIBRAMIX
DEKORA
• The products in the "Traditional formats" collection are made with sharp
• Orders of one fixed length will be individually evaluated. Once accepted a
edges (without chamfer).
surcharge of 20% will be applied.
• Material is supplied in random lengths subject to availability.
• Some products in this pricelist are manufactured upon request.
Listone 90 may occasionally be supplied with length 1200 mm, Corona 70
Please check availability and delivery time with the sales department
with length 800 mm.
before placing the order.
• The material supplied may incorporate up to 10% of shorter lenghts
* Products supplied in Naturplus finish.
compared to the ones mentioned in the price list. TECHNICAL INFORMATION
ADDITIONAL
page 4
WOOD WORKING
CLEANING AND MAINTENANCE
page 31
ACCESSORIES
page 32
PRODUCTS
page 36
19
IROKO / EXTRA-WIDE BOARDS
AHORN KANADISCH EICHE AUS FONTAINES XPLUS
NATURPLUS2
INVISIBLE TOUCH
OLEONATURE
NATIF
PRE-SANDED
230 lengths total thickness 14 / 16 mm
*
1500-2400 mm
190
hardwood thickness
lengths
5 mm
1500-2400 mm
142,75 **
140 lengths 1200-2100 mm
190 lengths total thickness
1500-2400 mm
12,5 mm
140
hardwood thickness
lengths
3,5 mm
1200-2100 mm
190 lengths total thickness
1500-2400 mm
10 mm
140
hardwood thickness
lengths
2,5 mm
1500-1800 mm
140 smart lengths 800-1200 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT
FIBRAMIX
COUNTRY
• The products in the "Extra-wide boards" collection, unless otherwise specified,
• Some products in this pricelist are manufactured upon request.
are made with a small bevel on all four edges.
Please check availability and delivery time with the sales department
• The products are supplied in random lengths according to availability.
before placing the order.
In 190 mm width lengths between 1800 and 2100 mm are mainly available. • The material supplied may incorporate up to 10% of shorter lenghts
* The product Plank 140 has a total thickness of 14 mm, Plank 190
compared to the ones mentioned in the price list.
a total thickness of 16 mm.
• Orders of one fixed length will be individually evaluated. Once accepted a
** Products supplied in Naturplus finish and sharp edges
surcharge of 20% will be applied.
(without chamfer).
TECHNICAL INFORMATION
ADDITIONAL
page 4
WOOD WORKING
CLEANING AND MAINTENANCE
page 31
ACCESSORIES
page 32
PRODUCTS
page 36
20
IROKO / TRADITIONAL FORMATS
AHORN KANADISCH EICHE AUS FONTAINES XPLUS
125 total thickness 14 mm
lengths
hardwood thickness
800-1500 mm
NATURPLUS2
INVISIBLE TOUCH
OLEONATURE
NATIF
PRE-SANDED
114,50 100,80
5 mm
90 total thickness 14 mm
lengths
hardwood thickness
490-1200 mm
5 mm
70 total thickness 11 mm
lengths
hardwood thickness
350-800 mm
5 mm
90 total thickness 11 mm
lengths
hardwood thickness
490-1000 mm
100,55
3,5 mm
70 total thickness 9,5 mm
lengths
hardwood thickness
350-600 mm
70,15
70,15 *
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT
FIBRAMIX
DEKORA
• The products in the "Traditional formats" collection are made with sharp
• Orders of one fixed length will be individually evaluated. Once accepted a
edges (without chamfer).
surcharge of 20% will be applied.
• Material is supplied in random lengths subject to availability.
• Some products in this pricelist are manufactured upon request.
Listone 90 may occasionally be supplied with length 1200 mm, Corona 70
Please check availability and delivery time with the sales department
with length 800 mm.
before placing the order.
• The material supplied may incorporate up to 10% of shorter lenghts
* Products supplied in Naturplus finish.
compared to the ones mentioned in the price list. TECHNICAL INFORMATION
ADDITIONAL
page 4
WOOD WORKING
CLEANING AND MAINTENANCE
page 31
ACCESSORIES
page 32
PRODUCTS
page 36
21
TEAK / EXTRA-WIDE BOARDS
TEAKKANADISCH AHORN EICHE AUS FONTAINES XPLUS
NATURPLUS2
INVISIBLE TOUCH
OLEONATURE
236,95 **
230
NATIF
PRE-SANDED
238,75
lengths total thickness 14 / 16 mm
*
1500-2400 mm
219,40 **
190
hardwood thickness
lengths
5 mm
1500-2400 mm
204,80 **
140 lengths 1200-2100 mm
190 lengths total thickness
1500-2400 mm
12,5 mm
140
hardwood thickness
lengths
3,5 mm
1200-2100 mm
190 lengths total thickness
1500-2400 mm
10 mm
140
hardwood thickness
lengths
2,5 mm
1500-1800 mm
140 smart lengths 800-1200 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT
FIBRAMIX
COUNTRY
• The products in the "Extra-wide boards" collection, unless otherwise specified,
• Some products in this pricelist are manufactured upon request.
are made with a small bevel on all four edges.
Please check availability and delivery time with the sales department
• The products are supplied in random lengths according to availability.
before placing the order.
In 190 mm width lengths between 1800 and 2100 mm are mainly available. • The material supplied may incorporate up to 10% of shorter lenghts
* The product Plank 140 has a total thickness of 14 mm, Plank 190
compared to the ones mentioned in the price list.
a total thickness of 16 mm.
• Orders of one fixed length will be individually evaluated. Once accepted a
** Products supplied in Naturplus finish and sharp edges
surcharge of 20% will be applied.
(without chamfer).
TECHNICAL INFORMATION
ADDITIONAL
page 4
WOOD WORKING
CLEANING AND MAINTENANCE
page 31
ACCESSORIES
page 32
PRODUCTS
page 36
22
TEAK / TRADITIONAL FORMATS
TEAK AHORN KANADISCH EICHE AUS FONTAINES XPLUS
NATURPLUS2
INVISIBLE TOUCH
OLEONATURE
NATIF
PRE-SANDED
125 total thickness 14 mm
lengths
hardwood thickness
800-1500 mm
181,20 *
183,00
5 mm
90 total thickness 14 mm
lengths
hardwood thickness
490-1200 mm
5 mm
70 total thickness 11 mm
lengths
hardwood thickness
350-800 mm
5 mm
90 total thickness 11 mm
lengths
hardwood thickness
490-1000 mm
123,30 *
123,30
125,15
3,5 mm
70 total thickness 9,5 mm
lengths
hardwood thickness
350-600 mm
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT
FIBRAMIX
DEKORA
• The products in the "Traditional formats" collection are made with sharp
• Orders of one fixed length will be individually evaluated. Once accepted a
edges (without chamfer).
surcharge of 20% will be applied.
• Material is supplied in random lengths subject to availability.
• Some products in this pricelist are manufactured upon request.
Listone 90 may occasionally be supplied with length 1200 mm.
Please check availability and delivery time with the sales department
• The material supplied may incorporate up to 10% of shorter lenghts
before placing the order.
compared to the ones mentioned in the price list.
* Products supplied in Naturplus finish.
TECHNICAL INFORMATION
ADDITIONAL
page 4
WOOD WORKING
CLEANING AND MAINTENANCE
page 31
ACCESSORIES
page 32
PRODUCTS
page 36
23
WENGE / EXTRA-WIDE BOARDS
AHORN KANADISCH EICHE AUS FONTAINES XPLUS
NATURPLUS2
INVISIBLE TOUCH
OLEONATURE
NATIF
PRE-SANDED
230 212,75 **
lengths total thickness 14 / 16 mm
*
1500-2400 mm
190
hardwood thickness
lengths
5 mm
1500-2400 mm
202,60 ** ***
204,45 ***
140 192,90 **
lengths
194,75
1200-2100 mm
190 lengths total thickness
1500-2400 mm
12,5 mm
140
hardwood thickness
lengths
3,5 mm
1200-2100 mm
190 lengths total thickness
1500-2400 mm
10 mm
140
hardwood thickness
lengths
2,5 mm
1500-1800 mm
140 smart lengths 800-1200 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT
FIBRAMIX
COUNTRY
• The products in the "Extra-wide boards" collection, unless otherwise specified,
• Some products in this pricelist are manufactured upon request.
are made with a small bevel on all four edges.
Please check availability and delivery time with the sales department
• The products are supplied in random lengths according to availability.
before placing the order.
In 190 mm width lengths between 1800 and 2100 mm are mainly available.
* The product Plank 140 has a total thickness of 14 mm, Plank 190
• The material supplied may incorporate up to 10% of shorter lenghts
a total thickness of 16 mm.
compared to the ones mentioned in the price list.
** Products supplied in Naturplus finish and sharp edges
• Orders of one fixed length will be individually evaluated. Once accepted a
(without chamfer).
surcharge of 20% will be applied.
*** Product supplied in 180 mm width.
TECHNICAL INFORMATION
ADDITIONAL
page 4
WOOD WORKING
CLEANING AND MAINTENANCE
page 31
ACCESSORIES
page 32
PRODUCTS
page 36
24
WENGE / TRADITIONAL FORMATS
AHORN KANADISCH EICHE AUS FONTAINES XPLUS
NATURPLUS2
INVISIBLE TOUCH
OLEONATURE
NATIF
PRE-SANDED
125 total thickness 14 mm
lengths
hardwood thickness
800-1500 mm
5 mm
90 total thickness 14 mm
lengths
hardwood thickness
490-1200 mm
5 mm
70 total thickness 11 mm
lengths
hardwood thickness
350-800 mm
5 mm
90 total thickness 11 mm
lengths
hardwood thickness
490-1000 mm
114,40 *
116,20
93,85 *
98,95
3,5 mm
70 total thickness 9,5 mm
lengths
hardwood thickness
350-600 mm
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT
FIBRAMIX
DEKORA
• The products in the "Traditional formats" collection are made with sharp
• Orders of one fixed length will be individually evaluated. Once accepted a
edges (without chamfer).
surcharge of 20% will be applied.
• Material is supplied in random lengths subject to availability.
• Some products in this pricelist are manufactured upon request.
Listone 90 may occasionally be supplied with length 1200 mm, Corona 70
Please check availability and delivery time with the sales department
with length 800 mm.
before placing the order.
• The material supplied may incorporate up to 10% of shorter lenghts
* Products supplied in Naturplus finish.
compared to the ones mentioned in the price list. TECHNICAL INFORMATION
ADDITIONAL
page 4
WOOD WORKING
CLEANING AND MAINTENANCE
page 31
ACCESSORIES
page 32
PRODUCTS
page 36
25
MAPLE SYCOMORUS / TRADITIONAL FORMATS
MAPLE SYCOMORUS FROM FONTAINES AHORN KANADISCH EICHE AUS FONTAINES XPLUS
NATURPLUS2
INVISIBLE TOUCH
OLEONATURE
NATIF
PRE-SANDED
125 total thickness 14 mm
lengths
hardwood thickness
800-1500 mm
114,45 *
5 mm
90 total thickness 14 mm
lengths
hardwood thickness
490-1200 mm
87,50 *
70
81,90 *
5 mm
total thickness 11 mm
lengths
hardwood thickness
350-800 mm
73,75 *
5 mm
90 total thickness 11 mm
lengths
hardwood thickness
490-1000 mm
3,5 mm
70 total thickness 9,5 mm
lengths
hardwood thickness
350-600 mm
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT
FIBRAMIX
DEKORA
• The products in the "Traditional formats" collection are made with sharp
• Some products in this pricelist are manufactured upon request.
edges (without chamfer).
Please check availability and delivery time with the sales department
• Material is supplied in random lengths subject to availability.
before placing the order.
Listone 90 may occasionally be supplied with length 1200 mm, Corona 70 with length 800 mm.
* The application of Sigilplus is compulsory for these products.
• The material supplied may incorporate up to 10% of shorter lenghts
(please s. "Cleaning and maintenance products" page).
compared to the ones mentioned in the price list. • Orders of one fixed length will be individually evaluated. Once accepted a surcharge of 20% will be applied. TECHNICAL INFORMATION
ADDITIONAL
page 4
WOOD WORKING
CLEANING AND MAINTENANCE
page 31
ACCESSORIES
page 32
PRODUCTS
page 36 26
CHERRY / TRADITIONAL FORMATS
AHORN SYCOMORUS AUS FONTAINES CHERRY FROM FONTAINES AHORN KANADISCH EICHE AUS FONTAINES XPLUS
NATURPLUS2
INVISIBLE TOUCH
OLEONATURE
NATIF
PRE-SANDED
125 total thickness 14 mm
lengths
hardwood thickness
800-1500 mm
5 mm
90 total thickness 14 mm
lengths
hardwood thickness
490-1200 mm
5 mm
70 total thickness 11 mm
lengths
hardwood thickness
350-800 mm
5 mm
90 total thickness 11 mm
lengths
hardwood thickness
490-1000 mm
115,70 *
117,55
3,5 mm
70 total thickness 9,5 mm
lengths
hardwood thickness
350-600 mm
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT
FIBRAMIX
DEKORA
• The products in the "Traditional formats" collection are made with sharp
surcharge of 20% will be applied.
edges (without chamfer).
• Some products in this pricelist are manufactured upon request.
• Material is supplied in random lengths subject to availability.
Please check availability and delivery time with the sales department
Listone 90 may occasionally be supplied with length 1200 mm.
before placing the order.
• The material supplied may incorporate up to 10% of shorter lenghts compared to the ones mentioned in the price list.
* The application of Sigilplus is compulsory for these products.
• Orders of one fixed length will be individually evaluated. Once accepted a
(please s. "Cleaning and maintenance products" page).
TECHNICAL INFORMATION
ADDITIONAL
page 4
WOOD WORKING
CLEANING AND MAINTENANCE
page 31
ACCESSORIES
page 32
PRODUCTS
page 36
27
STEAMED BEECH / TRADITIONAL FORMATS
AHORNGEDÄMPFT SYCOMORUS AUS FONTAINES BUCHE FONTAINES BEECHAUS FROM FONTAINES AHORNSTEAMED KANADISCH EICHE AUS FONTAINES XPLUS
NATURPLUS2
INVISIBLE TOUCH
OLEONATURE
NATIF
PRE-SANDED
107,55 *
125 total thickness 14 mm
lengths
hardwood thickness
800-1500 mm
94,65 *
90
99,40 *
5 mm
total thickness 14 mm
lengths
hardwood thickness
490-1200 mm
87,50 *
5 mm
70 total thickness 11 mm
lengths
hardwood thickness
350-800 mm
5 mm
90 total thickness 11 mm
lengths
hardwood thickness
490-1000 mm
3,5 mm
70 total thickness 9,5 mm
lengths
hardwood thickness
350-600 mm
62,15 *
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT
FIBRAMIX
DEKORA
• The products in the "Traditional formats" collection are made with sharp
surcharge of 20% will be applied.
edges (without chamfer).
• Some products in this pricelist are manufactured upon request.
• Material is supplied in random lengths subject to availability.
Please check availability and delivery time with the sales department
Corona 70 may occasionally be supplied with length 800 mm.
before placing the order.
• The material supplied may incorporate up to 10% of shorter lenghts compared to the ones mentioned in the price list.
* The application of Sigilplus is compulsory for these products.
• Orders of one fixed length will be individually evaluated. Once accepted a
(please s. "Cleaning and maintenance products" page).
TECHNICAL INFORMATION
ADDITIONAL
page 4
WOOD WORKING
CLEANING AND MAINTENANCE
page 31
ACCESSORIES
page 32
PRODUCTS
page 36
28
JATOBA / TRADITIONAL FORMATS
JATOBA AHORN SYCOMORUS AUS FONTAINES BUCHE GEDÄMPFT AUS FONTAINES JATOBA AHORN KANADISCH EICHE AUS FONTAINES XPLUS
NATURPLUS2
INVISIBLE TOUCH
OLEONATURE
NATIF
PRE-SANDED
125 total thickness 14 mm
lengths
hardwood thickness
800-1500 mm
5 mm
90 total thickness 14 mm
lengths
hardwood thickness
490-1200 mm
5 mm
70 total thickness 11 mm
lengths
hardwood thickness
350-800 mm
5 mm
90 total thickness 11 mm
lengths
hardwood thickness
490-1000 mm
109,70
111,55
73,75
78,85
3,5 mm
70 total thickness 9,5 mm
lengths
hardwood thickness
350-600 mm
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT
FIBRAMIX
DEKORA
• The products in the "Traditional formats" collection are made with sharp
• Orders of one fixed length will be individually evaluated. Once accepted a
edges (without chamfer).
surcharge of 20% will be applied.
• Material is supplied in random lengths subject to availability.
• Some products in this pricelist are manufactured upon request.
Listone 90 may occasionally be supplied with length 1200 mm, Corona 70
Please check availability and delivery time with the sales department
with length 800 mm.
before placing the order.
• The material supplied may incorporate up to 10% of shorter lenghts compared to the ones mentioned in the price list. TECHNICAL INFORMATION
ADDITIONAL
page 4
WOOD WORKING
CLEANING AND MAINTENANCE
page 31
ACCESSORIES
page 32
PRODUCTS
page 36
29
MORADO / TRADITIONAL FORMATS
JATOBA MORADO AHORN SYCOMORUS AUS FONTAINES BUCHE GEDÄMPFT AUS FONTAINES JATOBA AHORN KANADISCH EICHE AUS FONTAINES XPLUS
NATURPLUS2
INVISIBLE TOUCH
OLEONATURE
NATIF
PRE-SANDED
125 total thickness 14 mm
lengths
hardwood thickness
800-1500 mm
5 mm
90 total thickness 14 mm
lengths
hardwood thickness
490-1200 mm
5 mm
70 total thickness 11 mm
lengths
hardwood thickness
350-800 mm
5 mm
90 total thickness 11 mm
lengths
hardwood thickness
490-1000 mm
3,5 mm
70 total thickness 9,5 mm
lengths
hardwood thickness
350-600 mm
93,85
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT
FIBRAMIX
DEKORA
• The products in the "Traditional formats" collection are made with sharp
• Orders of one fixed length will be individually evaluated. Once accepted a
edges (without chamfer).
surcharge of 20% will be applied.
• Material is supplied in random lengths subject to availability.
• Some products in this pricelist are manufactured upon request.
Listone 90 may occasionally be supplied with length 1200 mm, Corona 70
Please check availability and delivery time with the sales department
with length 800 mm.
before placing the order.
• The material supplied may incorporate up to 10% of shorter lenghts compared to the ones mentioned in the price list. TECHNICAL INFORMATION
ADDITIONAL
page 4
WOOD WORKING
CLEANING AND MAINTENANCE
page 31
ACCESSORIES
page 32
PRODUCTS
page 36
30
Prices are €/m2 VAT excluded
SUPPLY FOR ANCIENNE INSTALLATION
additional surcharge 5,35 €/m2
Production for Ancienne installation with widths 83, 140 and 190 mm (respectively 15%, 50% and 35% of the whole surface). Available for Oak Plank and Listone for a minimum order quantity of 50 m2. The price is an additional surcharge on the price for the product with fix width 190 mm.
PRODUCTION FOR HERRINGBONE INSTALLATION
additional surcharge 12,50 €/m2
Production possible on all wood floors according to availability of the raw material. Requests for specific lengths which are not standard lengths will be individually evaluated. Once accepted a price surcharge will be applied. The price is an additional surcharge on the price for regular installation product.
PRODUCTION FOR HUNGARIAN POINT
quotation upon request
Production possible on all wood floors in Oleonature finish. The price is an additional surcharge on the price for regular installation product.
PRODUCTION FOR VIBRAZIONI INSTALLATION
quotation upon request
Production with sharp edges possible for Listone 90 and Listone 125 with all finishes indicated in this price list. Production with small chamfer possible for all products of the collection "extra-wide boards" with Oleonature finish. Before placing the order, please check with the sales department for availability of raw material. The price is an additional surcharge on the price for regular installation product.
GRIFFE'
additional surcharge 5,35 €/m2
The appearance of the surface is characteristic of a rough-sawn wood floor. Griffé surface treatment is possible on all products of the collection "extra-wide boards" with Oleonature finish. The minimum order quantity is 50 m2.
31
STAIR NOSINGS ( TYPE A) ITEM
A
B
C
LENGTH
WIDTH
FRONTAL HEIGHT
1200 mm 1200 mm 1200 mm 1200 mm 1200 mm 1200 mm 1200 mm 1200 mm
190 mm * 190 mm 190 mm 125 mm 90 mm 70 mm 90 mm 70 mm
40 mm 40 mm 40 mm 40 mm 40 mm 40 mm 40 mm 40 mm
PRODUCTS
Plank 230 / 190 / 140 Listone 190 / 140 Prima 190 / 140 / 140 smart Listone 125 Maxi 90 Original 70 Listone 90 Corona 70
144,00 144,00 144,00 110,65 72,00 72,00 72,00 72,00 Prices are €/pc VAT excluded
STAIR NOSING ( TYPE B) ITEM
A
B
C
LENGTH
WIDTH
FRONTAL HEIGHT
1200 mm 1200 mm 1200 mm 1200 mm 1200 mm 1200 mm 1200 mm 1200 mm
190 mm * 190 mm 190 mm 125 mm 90 mm 70 mm 90 mm 70 mm
190 mm * 190 mm 190 mm 125 mm 90 mm 70 mm 90 mm 70 mm
PRODUCTS
Plank 230 / 190 / 140 Listone 190 /140 Prima 190 / 140 / 140 smart Listone 125 Maxi 90 Original 70 Listone 90 Corona 70
169,90 169,90 169,90 130,60 85,00 85,00 85,00 85,00 Prices are €/pc VAT excluded
• Please specify the wood species and the finish when placing the stair • The standard elements are not designed to be fitted side by side. nosings order. In case of Plank stair nosings please also indicate the Requests of fitting together more stair nosings may be considered once thickness of the product (14 or 16 mm). the order is send in and may have an additional surcharge. • These products are available upon request. The delivery time for standard • The handcrafted production of stair nosings may show characteristic elements is about 30 days from receipt of the order confirmation. tolerances due to the hand-made process. For products with sizes, shapes and colours other than the standard elements, availability and delivery terms will be communicated each individual time.
* Cabreuva and Iroko stair nosings are supplied in 140 mm width. 32
ADHESIVE ITEM
PRODUCT
5,75
ECOLFIT (Silane eco-friendly one component adhesive)
Prices are €/kg VAT excluded
Tin 14 kg
REDUCERS ITEM
PRODUCTS A LENGTH
B WIDTH
1200 mm
30 mm
Plank 230 / 190 / 140 Listone 190 / 140 / 125 Prima 190 / 140 / 140 SMART Maxi 90 Original 70 Listone 90 Corona 70
63,70 63,70 63,70 50,75 50,75 50,75 50,75 Prices are €/pc VAT excluded
• When placing the order of the stair nosings, please specify the wood species and the finish. In case of Plank stair nosings please also indicate the thickness of the product (14 or 16 mm). • These products are available upon request. The delivery time for standard elements is about 30 days from receipt of the order confirmation. For products with sizes, shapes and colours other than the standard elements, availability and delivery terms will be communicated each individual time.
• The handcrafted production of reducers may show characteristic tolerances due to the hand-made process.
33
SKIRTING BOARDS 60x16 (veneer) ITEM
PRODUCTS Dimensions HEIGHT:
60 mm
THICKNESS:
16 mm
LENGTH:
2,40 m
OAK OAK MONTBLANC, BIANCOSPINO, CARVI, TAMARINDO OAK LINO, CASHMERE, CRETA CHERRY CABREUVA KM31 DOUSSIE IROKO JATOBA MORADO TEAK WENGE
VARNISHED
NATURAL
BRUSHED
OIL
4,35 9,45 11,90
4,40 4,20
4,60 5,60
7,40 8,70 7,15 7,40 9,15 7,45 8,45
Prices are €/lin.m. VAT excluded
packages of 12 lin.m. or 24 lin.m.
SKIRTING BOARDS 50x10 (veneer) ITEM
PRODUCTS VARNISHED Dimensions
BRUSHED
HEIGHT:
50 mm
THICKNESS:
10 mm
LENGTH:
2,40 m
OAK OAK MONTBLANC, BIANCOSPINO, CARVI, TAMARINDO OAK LINO, CASHMERE, CRETA WHITE LACQUERED SATIN ALUMINIUM
packages of 19,20 lin.m.
• Skirting boards with Michelangelo colours are available upon request. The delivery time is about 30 days from receipt of the order confirmation. • The wood veneer coating the skirting board (veneered versions) may present differences in grain and colour compared to the corresponding wood floor material.
4,35 9,45 11,90 3,60 7,95 Prices are €/lin.m. VAT excluded
• We recommend 50x15 mm skirting boards for Oak wood flooring with Oleonature and Invisible Touch finish. • The coating of white lacquered skirting board is made of monolayer laminate. 34
SKIRTING BOARDS 82x13 (veneer) ITEM
PRODUCTS VARNISHED Dimensions
SMOOTH
HEIGHT:
82 mm
THICKNESS:
13 mm
LENGTH:
2,40 m
OAK EUROPEAN MAPLE EUROPEAN CHERRY STEAMED BEECH CANADIAN MAPLE CABREUVA KM31 DOUSSIE IROKO JATOBA MORADO TEAK
4,05 4,05 4,70 4,00 4,60 5,85 4,20 4,05 4,40 6,50 4,45 Prices are €/lin.m. VAT excluded
packages of 12 lin.m. or 24 lin.m.
SKIRTING BOARDS DECOR (solid wood) ITEM
PRODUCT Dimensions HEIGHT:
120 mm
THICKNESS:
14 mm
LENGTH:
2,45 m
WHITE LACQUERED
packages of 14,7 lin.m.
• The wood veneer coating the skirting board (veneered versions) may present differences in grain and colour compared to the corresponding wood floor material. • The length of Decor skirting board may slightly differ from indications here above.
16,45
Prices are €/lin.m. VAT excluded
• The coating of white lacquered skirting board is made of monolayer laminate.
35
CLEANING AND MAINTENANCE PRODUCTS / COMPATIBILITY CHART FINISH
CLEANING
ORDINARY USE
EXCEPTIONAL USE
PROFESSIONAL USE
XPLUS
deterplus
vitaplus
plusnovo extraclean
sigilplus puliplus
NATURPLUS
deterplus
_
plusnovo extraclean
puliplus
NATURPLUS2
deterplus
_
plusnovo extraclean
puliplus
INVISIBLE TOUCH
green
_
_
puliplus
OLEONATURE
green
revivo
renovo
_
NATIF
oleonetto
oleovivo
oleonovo extraclean
_
36
PRODUCTS / DESCRIPTIONS Packaging 1 Litre, unless otherwise specified
Prix are €/piece VAT excluded
deterplus Mild detergent for the cleaning of varnished wood floors. For routine use. vitaplus Protective and renovating product for varnished not brushed wood floors. For ordinary use. plusnovo Specific product suitable to reduce the whitish effect caused by superficial scratches on varnished wood floors. Available in different colours. sigilplus Protective water-repellent liquid to seal Listone Giordano plank’s heads and sides. Recommended in particular for areas where the risk of water spilling is higher (ie kitchen and bathroom). Compulsory in any room with wood floor in Maple, Cherry and Beech with Xplus finish. Margaritelli accepts no responsibility for any installation of Beech, Maple or Cherry where Sigilplus has not been applied. puliplus Special cleaning liquid to remove excess glue and stubborn stains from the surface of varnished wood floors. oleonetto Mild detergent composed of natural oils for the cleaning and maintenance of wood floors with Natif finish. For routine use.
9,25
13,10
4,05 Packaging 0,25 litre
21,30
10,35
20,90
oleovivo Protective and revitalising solution composed of natural oils for wood floors with Natif finish. For ordinary use.
22,65
oleonovo Product for restoring scratches on wood floors with Natif finish.
20,90 Packaging 0,25 litre
extraclean Intensive detergent for extraordinary cleaning of tough dirt.
9,55
green Mild detergent for the cleaning of wood floors with Oleonature finish and Invisible Touch finish. For routine use.
6,00
revivo Natural oil-wax product, water based, suitable to nourish and protect wood floors with Oleonature finish. renovo Specific product suitable to regenerate scratches and small superficial stains of wood floors with Oleonature finish. Available in different colours.
19,90
11,95 Packaging 0,25 litre
37
36
39
Wood Species RESERVE Traccia
Oak Firenze 1299
Oak Agrigento 1881
Oak Siena 1348
Oak Mantova 1525
Oak Taormina 1410
RESERVE Filo di Lama
Oak Firenze 1420
Oak Agrigento 1087
Oak Erice 1460
RESERVE Mareggiata - DOC Mareggiata
QUATTROCENTO ITALIANO
Oak Pisa 1173
Oak from Fontaines
Oak from Fontaines
Oak from Fontaines
Puro
Biancospino
Carvi
Oak Amalfi 1266
Oak Genova 1260
FAHRENHEIT
Oak from Fontaines
Oak from Fontaines
Ash from Fontaines
Ash from Fontaines
380° F
430° F
350° F
460° F
ANCIEN
ANTIQUE
European Walnut
Oak Puro
Puro
40
Collections Reserve is a wood floor collection with distinctive hand-planed and crafted treatments.
The natural evolution of the species. Unique wooden surfaces crafted by the human hand and enhanced by the sign of time in extra lage dimnesional boards. The wooden matter stands out in all its original beauty and amplitude.
This wood floor Collection is characterized by heating cycles of different intensity and duration. Thanks to this natural process the complete thickness of the wood acquires a dark colour tone.
Extra wide boards bring back to life the history and the charm of wood, to create unique and exclusive surfaces.
The hardwood flooring collection featuring boards in different widths and lengths for the Ancien installation patterns.
The characteristic amber hue, the distressed boards and the different dimensions characterize the timeless charm of wood floors.
Finishes OLEONATURE
Natural oils-based finish air-dried, applied to a brushed surface. It is characterized by high protection and easy maintenance, thanks to a special treatment as last coating application.
NATIF
Natural oils-based finish air-dried. It is characterized by a highly natural, matt appearance and the maintenance of a typical open-pore wood which requires periodic nourishment.
• Products in natural oil finishing, tend to get a yellowish colour tone should
considered by any means as imperfection but on the contrary proof the authentic
the products be kept in the boxes for a long time or it does not get exposed to
uniqueness of the product.
light and air. It’s an utterly natural and transitory phenomenon due to the
• Wood is a natural and variegated material, therefore the descriptions above,
vegetable origin of the oils. This effect is totally reversible within a few hours,
as well as photos and samples displayed do not fully represent the full colours'range
once the wood boards are exposed to direct sunlight whilst in an environment with
in a comprehensive way the full range of colours, textures and peculiarities of each
artificial light it may take up to few weeks.
indidividual product. The above descriptions, photos and samples should therefore be
• Listone Giordano Atelier wood floor features dimensional and aesthetic
considered as indicative.
characteristics of a hand-made product. Therefore prospective tolerances (such
• The features and specifications of the products stated in this document may
as coplanarity of the boards, homogeneity of the colour treatment) should not be
be subject to alterations.
41
LENGTHS WIDTH WEIGHT TOTAL THICKNESS HARDWOOD THICKNESS BATTEN SUPPORT COUNTER-BALANCED IN OAK
1600-1900 mm 190 mm 11 kg/m² approx. 18 mm 3,5 mm 14,5 mm
TRACCIA Wood floor collection with distinctive hand-planed and crafted treatments. WOOD SPECIES
FEATURE
OAK
Firenze 1299
Oleonature
125,25 150,45 150,45 150,45 150,45
Agrigento 1881 * Siena 1348 Mantova 1525 Taormina 1410
FILO DI LAMA Wood floor with rough-sawn surface. WOOD SPECIES
FEATURE
OAK
Firenze 1420
Oleonature
130,10 151,85 151,85
Agrigento 1087 * Erice 1460
MAREGGIATA Wood floor with handcrafted surface, which emphasizes the structure of knots and the most authentic characteristics of the species,as for a material exposed naturally to the actions of the time. WOOD SPECIES
FEATURE
OAK
Pisa 1173
Oleonature
139,75 163,65 163,65
Amalfi 1266 Genova 1260
Prices are €/m² VAT excluded
• The outline of each strip of all Reserve products is characterized by chamfered edges except for the product Filo di Lama which is only chamfered on longitudinal sides. • Material is supplied in random lengths subject to availability. The material supplied may incorporate up to 20% of shorter lenghts compared to the ones mentioned in the price list. • Orders of one fixed length will be individually evaluated. Once accepted a surcharge of 20% will be applied. • These products first undergo a special heating treatment to intensify the original colour of the wood combined with natural oils-based pigments (transparent for Firenze and Pisa). • The flooring collection is characterized by a non-homogenous natural
colour tone of the surface, a marked presence of filled or open cracks, along with firm, consolidated or partially open knots. • All the products of the Réserve collection are available upon request. The minimum order quantity is 35 m2. A 40% deposit is required for all orders. Please check availability and delivery time with the sales department before placing the order. • Suitable for floating or glued-down installation. Glued-down installation is recommended for use with underfloor heating and cooling system.
* Occasionally available. 42
LENGTHS WIDTH WEIGHT TOTAL THICKNESS HARDWOOD THICKNESS BATTEN SUPPORT COUNTER-BALANCED IN OAK
2800 - 3000 mm 260 mm 11 kg/m² approx. 18 mm 3,5 mm approx. 14,5 mm
MAREGGIATA Wood floor with handcrafted surface, which emphasizes the structure of knots and the most authentic characteristics of the species,as for a material exposed naturally to the actions of the time. WOOD SPECIES
FEATURE
OAK
Pisa 1173
Oleonature
167,05 190,90 190,90
Amalfi 1266 Genova 1260
Prices are €/m² VAT excluded
• The outline of each strip is characterized by chamfered edges. • Material is supplied in random lengths subject to availability.
colour tone of the surface, a marked presence of filled or open cracks, along with firm, consolidated or partially open knots.
The material supplied may incorporate up to 30% of shorter lenghts
• All the products of the Doc collection are available upon request. 2 The minimum order quantity is 35 m . A 40% deposit is required for
compared to the ones mentioned in the price list. • Orders of one fixed length will be individually evaluated. Once accepted a
all orders.
surcharge of 20% will be applied. • These products first undergo a special heating treatment to intensify the original colour of the wood combined with natural oils-based pigments
Please check availability and delivery time with the sales department before placing the order. • Suitable for floating or glued-down installation. Glued-down
(transparent for Pisa). • The flooring collection is characterized by a natural non-homogenous
installation is recommended for use with underfloor heating and cooling system.
43
140
LENGTHS WIDTH WEIGHT TOTAL THICKNESS HARDWOOD THICKNESS
mixed from 1200 to 2000 mm
BIRCH WOOD MULTILAYER SUPPORT
11 mm
140 mm 11,5 kg/m² approx. 16 mm 5 mm
190
LENGTHS WIDTH
mixed from 1500 to 2000 mm 190 mm *
WEIGHT TOTAL THICKNESS HARDWOOD THICKNESS
11,5 kg/m² approx.
BIRCH WOOD MULTILAYER SUPPORT
11 mm
WOOD SPECIES
FEATURE
OAK FROM FONTAINES
16 mm 5 mm
140
190
Natif, brushed
Natif, brushed
170,65
380°F
178,55 178,55 182,05 182,05
430°F
ASH FROM FONTAINES
350°F 460°F
Prices are €/m² VAT excluded
2
• The outline of each strip is characterized by chamfered edges. • Material is supplied in random lengths subject to availability. The material supplied may incorporate up to 10% of shorter lenghts compared to the ones mentioned in the price list. • Orders of one fixed length will be individually evaluated. Once accepted a surcharge of 20% will be applied. • These products feature characteristic colour tone variations even in the same
The minimum order quantity is 35 m . A 40% deposit is required for all orders. Please check availability and delivery time with the sales department before placing the order. • Glued-down installation is recommended for these products. They are suitable for the installation on underfloor heating and cooling system.
wood board due to the heating treatment process. As the time passes the floor tends to get lighter due to the exposure to the air and light. • All the products of the Fahrenheit collection are available upon request.
* This product could be supplied in 180 mm width instead of 190 mm, depending upon the availability of raw materials.
44
LENGTHS WIDTHS WEIGHT TOTAL THICKNESS HARDWOOD THICKNESS
mixed from 2000 to 3600 mm 190/230/390 mm 11,5 kg/m² approx. 15,5 mm 4 mm
MULTILAYER SUPPORT COUNTER-BALANCED IN OAK
11,5 mm
WOOD SPECIES
FEATURE
OAK FROM FONTAINES
Oleonature
193,55 199,20 199,20
Puro Biancospino Carvi
Prices are €/m² VAT excluded
• The outline of each strip is characterized by chamfered edges. • Material is supplied in random lengths and widths subject to availability. The material supplied may incorporate up to 10% of shorter lenghts compared to the ones mentioned in the price list. • Orders of one fixed length will be individually evaluated. Once accepted a surcharge of 20% will be applied. • All the products of the Quattrocento italiano collection are available upon request. The minimum order quantity is 35 m2.
A 40% deposit is required for all orders. Please check availability and delivery time with the sales department before placing the order. • Suitable for floating or glued-down installation. Glued-down installation is recommended for use with underfloor heating and cooling system.
45
LENGTHS WIDTHS WEIGHT TOTAL THICKNESS HARDWOOD THICKNESS
mixed from 1000 to 2000 mm
BIRCH WOOD MULTILAYER SUPPORT
11 mm
WOOD SPECIES
FEATURE
EUROPEAN WALNUT
Puro
90/125/140/190 mm 11,5 kg/m² approx. 16 mm 5 mm
Natif
224,65 Prices are €/m² VAT excluded
• The outline of each strip is characterized by chamfered edges. • Material is supplied in random lengths and widths subject to availability. The material supplied may incorporate up to 15% of shorter lenghts compared to the ones mentioned in the price list. • Specific requests for a single length and/or width or for fixed lengths and/or widths will not be accepted. • These products are also available in pre-sanded version with a reduction 2
of 18,25 €/m as to the price of the product with Natif finish. • Walnut is a rare and prized wood species.
Each wood board in this collection is to be regarded as a unique piece of its own featuring heavy and sometimes very dark grains. • All the products of the Ancien collection are available upon request. 2 The minimum order quantity is 35 m . A 40% deposit is required for all orders. Please check availability and delivery time with the sales department before placing the order. • Glued-down installation is recommended for these products. They are suitable for the installation on underfloor heating and cooling system.
46
LENGTHS WIDTHS WEIGHT TOTAL THICKNESS HARDWOOD THICKNESS
mixed from 1000 to 2000 mm
BIRCH WOOD MULTILAYER SUPPORT
11 mm
WOOD SPECIES
FEATURE
OAK
Puro
90/125/140/190 mm 11,5 kg/m² approx. 16 mm 5 mm
Natif
215,00 Prices are €/m² VAT excluded
Wood floor collection with distinctive hand-planed and crafted treatments. In the collection 2013, Antique is not produced with historic material but with distressed steamed Oak.
• The outline of each strip is characterized by chamfered edges. • Material is supplied in random lengths and widths subject to availability. The material supplied may incorporate up to 10% of shorter lenghts compared to the ones mentioned in the price list. • Specific requests for a single length and/or width or for fixed lengths and/or widths will not be accepted. • All the products of the Antique collection are available upon request.
2 The minimum order quantity is 35 m . A 40% deposit is required for all orders. Please check availability and delivery time with the sales department before placing the order. • Glued-down installation is recommended for these products. They are suitable for the installation on underfloor heating and cooling system.
47
STAIR NOSINGS ( TYPE A) ITEM
A
B
C
LENGTH
WIDTH
FRONTAL HEIGHT
1200 mm
190 mm
40 mm
PRODUCTS NATURAL OIL
RESERVE TRACCIA RESERVE FILO DI LAMA RESERVE MAREGGIATA DOC MAREGGIATA FAHRENHEIT FAHRENHEIT QUATTROCENTO ITALIANO ANCIEN ANTIQUE
144,00 167,85 144,00 144,00 155,25 155,25 144,00 159,50 167,85
OAK OAK OAK OAK ASH OAK WALNUT OAK
Prices are €/pc VAT excluded
STAIR NOSINGS ( TYPE B) ITEM
A
B
PRODUCTS
WIDTH
C FRONTAL HEIGHT
LENGTH
1200 mm
190 mm
190 mm
RESERVE TRACCIA RESERVE FILO DI LAMA RESERVE MAREGGIATA DOC MAREGGIATA FAHRENHEIT FAHRENHEIT QUATTROCENTO ITALIANO ANCIEN ANTIQUE
NATURAL OIL
169,90 198,05 169,90 169,90 183,20 183,20 169,90 188,20 198,05
OAK OAK OAK OAK OAK ASH OAK WALNUT OAK
Prices are €/pc VAT excluded
• These products are available upon request. The delivery time for standard elements is about 30 days from receipt of the order confirmation. For products with sizes, shapes and colours other than the standard elements, availability and delivery terms will be communicated each individual time. A 40% deposit is required for all eventual orders. • The frontal elements of the stair nosings do not have any special surface treatment.
• The standard elements are not designed to be fitted side by side. Requests of fitting together more stair nosings may be considered once the order is send in and may have an additional surcharge. • The handcrafted production of stair nosings may show characteristic tolerances due to the hand-made process.
48
ADEHESIVE ITEM
PRODUCTS
€/kg 5,75
ECOLFIT (Silane eco-friendly one component adhesive) - tin 14 kg
€/pc 2,85
VINYL GLUE (Adhesive for tongues and grooves for floating installation) - tin 0,50 kg
Prices are €/kg and €/pc VAT excluded
UNDERLAY ITEM
PRODUCT
1,15
Cellfoam for floating installation. Thickness: 3 mm - package of 15m2
Prices are €/m² VAT excluded
REDUCERS ITEM
A
B
LENGTH
WIDTH
1200 mm
30 mm
PRODUCTS NATURAL OIL
RESERVE TRACCIA RESERVE FILO DI LAMA RESERVE MAREGGIATA DOC MAREGGIATA FAHRENHEIT FAHRENHEIT QUATTROCENTO ITALIANO ANCIEN ANTIQUE
64,70 71,20 64,70 64,70 71,20 71,20 64,70 71,20 71,20
OAK OAK OAK OAK OAK ASH OAK WALNUT OAK
Prices are €/pc VAT excluded
• The reducers are suitable for glued-down installation only.
availability and delivery terms will be communicated each individual time.
• These products are available upon request. The delivery time for standard
A 40% deposit is required for all eventual orders.
elements is about 30 days from receipt of the order confirmation.
• The handcrafted production of the reducers may show characteristic
For products with sizes, shapes and colours other than the standard elements,
tolerances due to the hand made process.
49
SKIRTING BOARDS 60x16 (veneer) ITEM
PRODUCTS WOOD Dimensions HEIGHT:
60 mm
RESERVE TRACCIA
NATURAL
SPECIES
FEATURE
OAK
FIRENZE 1299
THICKNESS: 16 mm
TAORMINA 1410
LENGTH:
SIENA 1348
2,40 m
MANTOVA 1525 AGRIGENTO 1881
RESERVE FILO DI LAMA
OAK
FIRENZE 1420 AGRIGENTO 1087 ERICE 1460
RESERVE MAREGGIATA
OAK
PISA 1173 AMALFI 1266 GENOVA 1260
DOC MAREGGIATA
OAK
PISA 1173 AMALFI 1266 GENOVA 1260
FAHRENHEIT
OAK ASH
QUATTROCENTO ITALIANO ANCIEN ANTIQUE
OAK WALNUT OAK
UV oil*
VARNISHED
OIL
ROUGH-SAWN
7,15 11,90 11,90 11,90 11,90 11,90 11,90 11,90 7,15 11,90 11,90 7,15 11,90 11,90 7,10 6,95 7,10 9,60 7,10
7,10 7,10 7,10 7,10
8,90 7,10
7,10
Prices are €/lin.m. VAT excluded
packages of 12 lin.m. or 24 lin.m.
• These products are available upon request. The delivery time for standard
may present differences in grain and colour compared to the corresponding
elements is about 30 days from receipt of the order confirmation.
wood floor material.
• The skirting boards do not have any special surface treatment except for skirting boards "varnished rough-sawn". • The wood veneer coating the skirting board (veneered versions)
* These skirting boards are produced by digital print on veneer wood. 50
CLEANING AND MAINTENANCE PRODUCTS / COMPATIBILITY CHART COLLECTION
CLEANING
ORDINARY USE
EXCEPTIONAL USE
PROFESSIONAL USE
FAHRENHEIT ANCIEN ANTIQUE
oleonetto
oleovivo
oleonovo extraclean
_
revivo
renovo
_
RESERVE green DOC QUATTROCENTO ITALIANO
PRODUCTS / DESCRIPTIONS Packaging 1 Litre, unless otherwise specified
oleonetto Mild detergent composed of natural oils for the cleaning and maintenance of wood floors with Natif finish. For routine use.
Prices are €/piece VAT excluded
20,90
oleovivo Protective and revitalising solution composed of natural oils for wood floors with Natif finish. For ordinary use.
22,65
oleonovo Product for restoring scratches on wood floors with Natif finish.
20,90 Packaging 0,25 litre
extraclean Intensive detergent for extraordinary cleaning of tough dirt. green Mild detergent for the cleaning of wood floors with Oleonature finish. For routine use. revivo Natural oil-wax product, water based, suitable to nourish and protect wood floors with Oleonature finish. renovo Specific product suitable to regenerate scratches and small superficial stains of wood floors with Oleonature finish. Available in different colours.
9,55
6,00
19,90
11,95 Packaging 0,25 litre
51
49
53
Wood Species MEDOC
Oak Medoc #01
Oak Medoc #02
Oak Medoc #03
Oak Medoc #04
Oak Avana
Oak Tortora
Oak Testa di Moro
Oak Avana
Oak Tortora
Oak Testa di Moro
QUADRONE
Ancient Teak
VIBRAZIONI
SLIDE
Oak Avorio
FOXTROT
Oak Avorio
54
Collections It features trapezoidal-shaped wood boards weaving a contemporary pattern, inspired by ancient values. Design: Michele De Lucchi with Philippe Nigro Wooden floor reinterpreting historical European tradition of decorative wooden panels in a contemporary style. This product is made using entirely reclaimed solid Teak sourced from the restoration of ancient beams. Design: Michele De Lucchi with Philippe Nigro Wood floor distinguished by the angled cut just the heads of the planks. A sign capable of giving light and elegant modern movement in a floor based on the random composition of three different shades of gray. Design: Marco Tortoioli Ricci Modular floor covering made of three trapezoidal geometrical shapes . Simple sliding movements along the trapezoid’s bases or according to the oblique sides’ thread combined with free rotation create countless patterns. The planning of specific geometric relations in defining the shapes results in original and unique configurations. Design: Daniele Lago Modular floor covering made of three geometrical shapes: one square and two rectangles which keep the balance between lines and surfaces, between materials and colours inspired by a sign of modernity. Design: Matteo Nunziati
Finitions OLEONATURE
Natural oils-based finish air-dried, applied to a brushed surface. It is characterized by high protection and easy maintenance, thanks to a special treatment as last coating application.
NATURPLUS2
Solvents-free varnish, characterized by a natural finish aspect. It is applied after a brushing treatment of the surface. The Naturplus2 version, compared to Naturplus, highlights a sculptural pore effect and a less glossy surface. The finish features Crystalcare antibacterial technology.
OLEOSTRONG
Special UV oils finishing, this enhances the natural beauty of the wood and intensity of the colour. It is applied after a brushing treatment of the surface. It ensures an easy maintenance and high-resistance to penetration of liquids and domestic chemicals.
• Products in natural oil finishing, tend to get a yellowish colour tone should
• Wood is a natural and variegated material, therefore the descriptions above,
the products be kept in the boxes for a long time or it does not get exposed to
as well as photos and samples displayed do not fully represent the full colours'range
light and air. It’s an utterly natural and transitory phenomenon due to the
in a comprehensive way the full range of colours, textures and peculiarities of each
vegetable origin of the oils. This effect is totally reversible within a few hours,
indidividual product. The above descriptions, photos and samples should therefore be
once the wood boards are exposed to direct sunlight whilst in an environment with
considered as indicative.
artificial light it may take up to few weeks.
• The features and specifications of the products stated in this document may
• Listone Giordano Natural Genius wood floor features dimensional and aesthetic
be subject to alterations.
characteristics of a hand-made product. Therefore prospective tolerances (such as coplanarity of the boards, homogeneity of the colour treatment) should not be considered by any means as imperfection but on the contrary proof the authentic uniqueness of the product.
55
design Michele De Lucchi with Philippe Nigro LENGTHS WIDTHS WEIGHT TOTAL THICKNESS HARDWOOD THICKNESS BATTEN SUPPORT COUNTER-BALANCED IN OAK
944 mm
WOOD SPECIES
FEATURE
OAK
Medoc#01
130-190 mm 11 kg/m² approx. 18 mm 3,5 mm 14,5 mm
Oleonature
224,10 215,15 224,10 224,10
Medoc#02 Medoc#03 * Medoc#04 *
Prices are €/m² VAT excluded
It features trapezoidal-shaped wood boards weaving a contemporary pattern, inspired by ancient values. 2
• The outline of each strip is characterized by chamfered edges. • In order to lay this specific geometric pattern, boards of the same shape will be supplied half A and half B (see technical drawing). • The boards are specially ‘groove-groove’ milled on the support base and interlock on all four sides by loose wooden tongue-joints supplied with the flooring. • The Oak is firstly heat treated to intensify the original colour. This product has a marked non homogeneous colour tone and a widespread presence of filled or
The minimum order quantity is 35 m . A 40% deposit is required for all orders. Please check availability and delivery time with the sales department before placing the order. • Glued-down installation is recommended for these products. They are indicated for the installation on underfloor heating and cooling system.
open cracks and knots.
* Occasionally available.
• All the products of the Medoc collection are available upon request.
56
design Michele De Lucchi with Philippe Nigro LENGTH WIDTH WEIGHT
1000 mm
TOTAL THICKNESS SOLID WOOD
18,5 mm
1000 mm 12 kg/m² approx.
WOOD SPECIES
To be finished on site
322,50
ANCIENT TEAK
Prices are €/m² VAT excluded
Wooden floor reinterpreting historical European tradition of decorative wooden panels in a contemporary style. This product is made using entirely reclaimed solid Teak sourced from the restoration of ancient beams. • In order to facilitate the logistic and fitting operations, each module is supplied in 6 specific elements: 2 side stripes 250x1000 mm + 4 middle stripes 250x500 mm, each one of them incorporating 7 smaller elements. • The two different types of panels, as described above, are groove profiled on four sides, loose wooden tongue-joints are supplied with the flooring. • Each element is enhanced by a slight chamfered edge. • This wood flooring is supplied unfinished to be treated on site with specific protection coating. • A preliminary project of the surface is necessary to order the correct number of modules and related waste due to perimeter cutting of the elements (usually calculated between 5% and 10% though percentage may vary according to dimension and shape of the area to be laid). Please refer to technical sheets for installation patterns' design. • The product is available upon request. The minimum order quantity is 35 m2.
A 40% deposit is required for all orders. Please check availability and delivery time with the sales department before placing the order.
• Suitable for both glue-down and floating installation. The wooden tongues are to be glued to all four sides of each module in case of floating fitting. The glued-down installation is recommended with underfloor heating and cooling system. • The Quadrone collection does not feature standard accessory elements (reducers, stair nosings and skirting boards) as they are part of an integrated interior design project. Special items can be manufactured upon specific estimate. A 40% deposit is required for all eventual orders. 57
design Marco Tortoioli Ricci LENGTH WIDTH WEIGHT TOTAL THICKNESS HARDWOOD THICKNESS
781 mm
BIRCH WOOD MULTILAYER SUPPORT
7,5 mm
WOOD SPECIES
FEATURE
OAK
VIBRAZIONI#01
90 mm 8 kg/m² approx. 11 mm 3,5 mm
Naturplus2
129,80 Prices are €/m² VAT excluded
Wood floor distinguished by the angled cut just the heads of the planks. A sign capable of giving light and elegant modern movement in a floor based on the random composition of three different shades of gray. • The supply is divided, in equal amounts, in three different colors. The random fitting provides a contemporary and highly innovative design. • The product is available upon request. The minimum order quantity is 35 m2. A 40% deposit is required for all orders. Please check availability and delivery time with the sales department
before placing the order. • Glued-down installation is recommended for these products. They are indicated for the installation on underfloor heating and cooling system.
58
design Daniele Lago LENGTHS WIDTHS WEIGHT TOTAL THICKNESS HARDWOOD THICKNESS
565 - 600 - 371 mm
MULTILAYER COUNTER-BALANCED SUPPORT
12 mm
WOOD SPECIES
FEATURE
OAK
AVANA
565 - 413 - 571 mm 11 kg/m² approx 13 mm 1 mm
Oleostrong
139,15 139,15 153,70 139,15 139,15 153,70 139,15 139,15 153,70 139,15 139,15 153,70
Module 1 Module 2 Module 3
OAK
AVORIO
Module 1 Module 2 Module 3
OAK
TORTORA
Module 1 Module 2 Module 3
OAK
TESTA DI MORO
Module 1 Module 2 Module 3
Prices are €/m² VAT excluded
Modular floor covering ((Ref. UNI EN 14354) made of three trapezoidal geometrical shapes (Module 1, Module2, Module 3). Simple sliding movements along the trapezoid’s bases or according to the oblique sides’ thread combined with free rotation create countless patterns. The planning of specific geometric relations in defining the shapes results in original and unique configurations. Just two elements (Module 2 + Module 3) may create a flooring surface featuring a-periodic patterns, which can expand without ever replicating themselves. • Each individual module is groove profiled on four sides, loose wooden tongue-joints are supplied with the flooring.
Please check availability and delivery time with the sales department before placing the order.
• The outline of each module is characterized by chamfered edges. • The section of the product shows a core of 11 mm multilayer, 10/10 mm top layer in Oak veneer and the bottom layer in 10/10 mm counterbalanced veneer in a different wood species. • A preliminary project of the surface is necessary to order the correct number of modules and related waste due to perimeter cutting of the elements (usually calculated between 15% and 20% though percentage may vary according to dimension and shape of the area to be laid). Please refer to technical sheets for installation patterns' design. • All the products of the Slide collection are available upon request. The minimum order quantity is 35 m2. A 40% deposit is required for all orders.
• Suitable for both glue-down and floating installation. The wooden tongues are to be glued to all four sides of each module in case of floating fitting. Glued-down installation is recommended for use with underfloor heating and cooling system. • The Slide collection does not feature standard accessory elements (reducers, stair nosings and skirting boards) as they are part of an integrated interior design project. Special items can be manufactured upon specific estimate. A 40% deposit is required for all eventual orders.
59
design Matteo Nunziati LENGTHS WIDTHS WEIGHT TOTAL THICKNESS HARDWOOD THICKNESS
480 - 960 - 960 mm 480 - 160 - 320 mm 11 kg/m² approx. 13 mm 1 mm
MULTILAYER COUNTER-BALANCED SUPPORT 12 mm
WOOD SPECIES
FEATURE
OAK OAK
AVANA AVORIO
OAK OAK
TORTORA TESTA DI MORO
Oleostrong
142,85 142,85 142,85 142,85 Prices are €/m² VAT excluded
Modular floor covering (Ref. UNI EN 14354) made of three geometrical shapes: one square and two rectangles which keep the balance between lines and surfaces, between materials and colours inspired by a sign of modernity. • The standard order incorporates: nr. 2 modules 480x480 mm, nr. 6 modules 160x960 mm and nr. 4 modules 320x960 mm. • Each individual module is groove profiled on four sides, loose wooden tongue-joints are supplied with the flooring. • The outline of each module is characterized by chamfered edges. • The section of the product shows a core of 11 mm multilayer, 10/10 mm top layer in Oak veneer and the bottom layer in 10/10 mm counterbalanced veneer in a different wood species. • A preliminary project of the surface is necessary to order the correct number of modules and related waste due to perimeter cutting of the elements (usually calculated between 5% and 10% though percentage may vary according to dimension and shape of the area to be laid). Please refer to technical sheets for installation patterns' design. • All the products of the Foxtrot collection are available upon request.
A 40% deposit is required for all orders. Please check availability and delivery time with the sales department before placing the order. • Suitable for both glue-down and floating installation. The wooden tongues are to be glued to all four sides of each module in case of floating fitting. Glued-down installation is recommended for use with underfloor heating and cooling system. • The Foxtrot collection does not feature standard accessory elements (reducers, stair nosings and skirting boards) as they are part of an integrated interior design project. Special items can be manufactured upon specific estimate. A 40% deposit is required for all eventual orders.
The minimum order quantity is 35 m2.
60
STAIR NOSINGS ( TYPE A) ITEM
A
B
C
PRODUCTS
LENGTH
WIDTH
FRONTAL HEIGHT
1200 mm
190 mm
40 mm
NATURAL GENIUS_MEDOC
OAK
1200 mm
90 mm
40 mm
NATURAL GENIUS_VIBRAZIONI
OAK
NATURAL OIL VARNISHED BRUSHED
167,85 72,00 Prices are €/pc VAT excluded
STAIR NOSINGS ( TYPE B) ITEM
A
B
C
PRODUCTS
LENGTH
WIDTH
FRONTAL HEIGHT
1200 mm
190 mm
190 mm
NATURAL GENIUS_MEDOC
OAK
1200 mm
90 mm
90 mm
NATURAL GENIUS_VIBRAZIONI
OAK
NATURAL OIL VARNISHED BRUSHED
198,05 85,00 Prices are €/pc VAT excluded
SKIRTING BOARDS 60x16 (veneer) ITEM
PRODUCTS WOOD Dimensions
NATURAL
VARNISHED VARNISHED
OIL
BRUSHED
ROUGH-SAWN
SPECIES FEATURE
HEIGHT:
60 mm
THICKNESS:
16 mm
LENGTH:
2,40 m
NATURAL GENIUS_MEDOC
OAK
MEDOC#01 MEDOC#02 #03 #04
NATURAL GENIUS_VIBRAZIONI NATURAL GENIUS_SLIDE NATURAL GENIUS_FOXTROT
OAK OAK OAK
11,90 11,90
8,90 15,50 7,35 7,35 Prices are €/lin.m. VAT excluded
packages of 12 lin.m. or 24 lin.m.
For products with sizes, shapes and colours other than the standard elements,
• The wood veneer coating the skirting board (veneered versions) may present differences in grain and colour compared to the corresponding wood floor material.
availability and delivery terms will be communicated each individual time.
• The skirting boards do not have any special surface treatment except for
A 40% deposit is required for all eventual orders.
skirting boards "varnished rough-sawn".
• The frontal elements of the stair nosings do not have any special surface
• Skirting boards are available upon request. Delivery approximately
treatment.
30 days upon receipt of the order confirmation.
• The standard elements are not designed to be fitted side by side.
A 40% deposit is required for all orders.
• These stair nosings are available upon request. The delivery time for standard elements is about 30 days from receipt of the order confirmation.
Requests of fitting together more stair nosings may be considered once the order is send in and may have an additional surcharge. • The handcrafted production of the stair nosings may show characteristic tolerances due to the hand made process.
61
ADEHESIVE ITEM
PRODUCTS
€/kg 5,75
ECOLFIT (Silane eco-friendly one component adhesive) - tin 14 kg
€/pc 2,85
VINYL GLUE (Adhesive for tongues and grooves for floating installation) - tin 0,50 kg
Prices are €/kg and €/pc VAT excluded
UNDERLAY ITEM
PRODUCT
1,15
Cellfoam for floating installation. Thickness: 3 mm - package of 15m2
Prices are €/m² VAT excluded
REDUCERS ITEM
A
B
C
PRODUCTS
LENGTH
WIDTH
THICKNESS
1200 mm
30 mm
18 mm
NATURAL GENIUS_MEDOC
1200 mm
30 mm
11 mm
NATURAL GENIUS_VIBRAZIONI OAK
VARNISHED NATURAL OIL BRUSHED OAK
71,20
_ _ 50,75
Prices are €/pc VAT excluded
• The reducers are suitable for glued-down installation only.
availability and delivery terms will be communicated each individual time.
• These products are available upon request. The delivery time for standard
A 40% deposit is required for all eventual orders. • The handcrafted production of the reducers may show characteristic tolerances due to the hand made process.
elements is about 30 days from receipt of the order confirmation. For products with sizes, shapes and colours other than the standard elements,
62
CLEANING AND MAINTENANCE PRODUCTS / COMPATIBILITY CHART COLLECTION
CLEANING
ORDINARY USE
EXCEPTIONAL USE
PROFESSIONAL USE
VIBRAZIONI
deterplus
_
_
puliplus
SLIDE FOXTROT
green
_
_
puliplus
MEDOC
green
revivo
renovo
_
PRODUCTS / DESCRIPTIONS Packaging 1 Litre, unless otherwise specified
puliplus Special cleaning liquid to remove excess glue and stubborn stains from the surface of varnished wood floors. deterplus Mild detergent for the cleaning of varnished wood floors. For routine use. green Mild detergent for the cleaning of wood floors with Oleonature and Oleostrong finish. For routine use. revivo Natural oil-wax product, water based, suitable to nourish and protect wood floors with Oleonature finish. renovo Specific product suitable to regenerate scratches and small superficial stains of wood floors with Oleonature finish. Available in different colours.
Prices are €/piece VAT excluded
10,35
9,25
6,00
19,90
11,95 lt. 0,25
63
Certifications Ecological, environmental and product quality
Biosphera is a marking system based
PEFC Certification of the chain of custody that guarantees the provenance of products from forests managed in an ecologically sustainable manner.
FSC Certification of the chain of custody that guarantees the provenance from forests managed according to strict environmental, social and economic standards.
ISO 9001 Quality Management System Certification.
ISO14001 Environmental Management System Certification.
CE Certification Listone Giordano strictly complies to all CE rules. Listone Giordano oil and varnish finishes meet the emission limits for harmfull substances under the CE marking of toys for the children in accordance with UNI EN 71-3:2002.
This mark identifies raw materials whose legal sourcing and forestry management, although not yet certified, is backed up by specific audit and related papers. This usually represents an intermediate step
Formaldehyde Listone Giordano fully complies to the class E1 regulation, which
Solvent-free No emission of solvents, as resulting from the analyses conducted on Listone
Anti-bacterial finish Listone Giordano varnished finishes are antibacterial certified by CATAS
towards the forestry certification.
is amongst the strictest European
Giordano by the SERECO BIOTEST
S.p.a laboratories according to ISO
regulations (UNI EN 14342).
chemical laboratory.
22196:2007 regulation.
upon Listone Giordano's green procurement policy which fulfills the need to provide the end-consumer with a brief, clear and useful piece of information regarding the source of the raw materials used in the manufacturing process. This focuses uniquely on the safeguard of the forests with regards to the specific characteristics of multilayer wood flooring. Therefore it is not meant to replace the international certification protocols of broad diffusion, which usually refer to wider fields of interest and application. Listone Giordano, through this protocol, aims at promoting the culture of environmental responsibility and the purchase of certified wood species.
This mark identifies raw materials whose forestry management is certified according to international standard (FSC, PEFC, SFI, OLB, LEI, etc.)
64
Information on hardwood flooring Please read the notes below to get the right information on the simple characteristics of use and natural reactions of wood flooring.
Wood: a living material Wood is a “living material”, therefore changes in shape and colour are natural
alterations in the wood structure and in the worst cases this can create
and inevitable effects originating from exterior elements, such as light, air,
micro-fractures on the top hardwood layer. To avoid this kind of problem
temperature, humidity and daily use (wear and tear).
installation should commence only after the temperature and atmospheric
It is important to be aware that:
moisture content has been checked. After installation the temperature of the
• Colour change in hardwood flooring is a natural characteristic. The colour
room should be maintained at the recommended levels.
of hardwood flooring depends not only on the colour of the wood fibres, but
• The varnish on the hardwood surface has a protective function, but depending
also on particular substances known as extractives which change due to
intensity, wear and tear on the floor can produce a certain degree of opacity
exposure to light and air. This reaction is visible as well on the versions with
of the varnish.
coloured finishes, by a mean which is directly proportioned to the intensity of
• The individual hardness of wood differs from species to species but all timbers
the colour tone.
processed to become hardwood floors are suitable for this application. Surface
• Because of the greater presence of extractives in tropical woods, these species
indentations may arise in even the hardest of woods if the hardwood floor is
are particularly prone to chromatic changes and usually evolve into a dark brown
subjected to knocks, falling objects, stiletto heels etc…As hardwood flooring is
colour tone. Iroko and Doussié are two species that can experience a strongly
a product of nature, these indentations must not be considered as defects
marked variation in colour tone, and Doussié in particular can show localized
within the floor.
effects of rapid and intense oxidation even on boards originally of the same colour
• Wood is not characterised by uniformity-regularity typical of synthetic material,
tone. Under these specific conditions known as “oxidation reaction”, traces of
two hardwood floors of the same timber will never have an identical aesthetic
silica, where are a natural part of the structure of wood, can become more evident.
appearance. Therefore a few sample strips can only represent an illustration or
On the contrary the colour variety of Tek tends to homogenise to a middleclear
general idea of the final aesthetic result and cannot fully comply with the
tone when exposed to light.
finished hardwood floor.
• On the other hand, the long exposure of the floor to direct sunlight, perhaps filtering
• All products with crafted treatments or with treatments on the colour of the wood
from window panes, may cause discoloration of the floor (due to the well known
feature dimensional and aesthetic characteristics of a hand-made product.
characteristics of the sun UV rays to discolor/alter materials other than wood).
Therefore prospective tolerances related, for instance, to the planarity of the boards,
In order to prevent this, we recommend the use of curtains or special UV filter film
non homogeneity of the colour treatment and little discolouring, etc. attest the
to be applied to the glass.
craftsmanship value of the product itself. Each individual board is different
• The natural characteristic of the extra wide wood boards, associated with the typical varied grain of the tangential cut, may cause slight fractures in
from the other and this irregularity makes it a unique piece. The distinctive crafted finishes can create some irregularity and splintering of the
correspondence with the medullary rays. This natural phenomenon could be more
wood surface where cloth used for cleaning and maintenance may get trapped.
evident should the wood floor suffer from severe climatic conditions. • Strips from a perfect radial section of a log in some species (in particular
Please consider this carefully when walking with bare feet on the floor. • Products with natural oil finishing, tend to get a yellowish colour tone should
Oak and Beech) feature straight grains and typical silver figures, the so called
the products be kept in the boxes for a long time or it does not get exposed to
“Medullary ray”. This type of graining emphasizes the quality and the value of the wood. In addition to the aesthetical appearance, regularity of the fibres is
light and air. It’s an utterly natural and transitory phenomenon due to the vegetable origin of the oils. This effect is totally reversible within a few hours,
an indication of better technical performances (stability and impermeability).
once the wood boards are exposed to direct sunlight whilst in an environment with
• During its lifetime wood is in contact with the environment and suffers from
artificial light it may take up to few weeks.
variations in humidity and temperature and as a result is inclined to distort and adapt in form and dimension. To achieve satisfactory installation, rooms should
• The oils-based finishing has the characteristic to continue over time to permeate
be maintained at an ideal temperature between 15º C - 30º C with the humidity
the wood fibers, particularly in tropical species, even while the material is still inside
of the atmosphere between 45% - 65%. These conditions provide as well a
the packaging. The possible appearance of surface dryness that you should notice
healthy and well environment to live in.
on newly laid planks, will be reset with the application of the specific product
Despite the improved stability attained because of the multi layer support,
for periodic maintenance.
very dry atmospheric conditions can lead the wood to shrink and lead to tiny gaps between wood strips. This phenomenon is reversible in correct climatic
The above described effects belong to the hardwood floor nature therefore
conditions. On the contrary, higher environmental moisture produces stress and
can not be considered defects in any way.
65
Listone Giordano is a brand of Margaritelli Group Margaritelli S.p.A. Toll free 0808 234 68 66
www.listonegiordano.com
