Precision Dial Gauges and Accessories

PROGRAM SUMMARY

DIAL GAUGES INSTRUMENTS

Sheet No. 1 Table of sizes and technical data for metric gauges ........................................................................................................... 2 Gauges with scale partition of 0,1 mm................................................................................................................................ 3 Standard and large-scale gauges with scale partition of 0,01 mm and of 0,005 mm.......................................................... 4 Shock-proof precision gauges of the new generation with scale partition of 0,01 mm........................................................ 5 Shock-proof safety gauges with free lift .............................................................................................................................. 6 Gauges with a scale partition of 0,01 mm and large-scale metering range ........................................................................ 7 Small gauges with scale partition of 0,01 mm..................................................................................................................... 8 Dial bench gauges and indicating callipers with a scale partition of 0,001 mm and of 0,002 mm...................................... 9 Scale partition for inched gauges........................................................................................................................................ 10 Digital gauges ..................................................................................................................................................................... 11 Accessories for gauges....................................................................................................................................................... 12 Standard gauge slides ........................................................................................................................................................ 13 Lever gauges according to DIN 2270.................................................................................................................................. 14 Accessories for lever gauges.............................................................................................................................................. 15 Depth metering gauges....................................................................................................................................................... 16 Thickness metering gauges ................................................................................................................................................ 17 Tyre engraving metering devices........................................................................................................................................ 18 Electrically operated gauges............................................................................................................................................... 19 Hardness testing gauge Shore A ........................................................................................................................................ 20 Metering stands and metering tables.................................................................................................................................. 21 Concentricity metering devices ........................................................................................................................................... 22 Meteor C – inexpensive standard-gauges of 0,01 mm scale partition ................................................................................ 23 Hand gauges for tensile force and for pressure force ......................................................................................................... 24 WB 32 – Measuring gauge for tooth angles and height difference ..................................................................................... 25 Precision gauges and accessories – Constructive features and dimensioned sketches ....................................................

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

Table of contents

DIAL GAUGES INSTRUMENTS

RAMBOLD - Precision gauges have successfully fulfilled the high requirements of precision gauges for 50 years now. Excellent metering characteristics, solid manufacturing and extraordinary durability in appropriate use distinguish the metering instruments described in this catalogue. Metering instruments and indicating calipers are linear indicating measuring instruments which use a mechanical system to transmit the spindle path to a pointer. The pointer movement can be read from a regularly partitioned stroke scale. Lever gauges are equipped with angle-movable gauge slides. The gauge slide excursion also is transmitted via a mechanical system to a pointer which moves in front of a regularly partitioned stroke scale. The following constructive features are to be especially emphasized: ■ All gauges are equipped with an extraordinary solid metal metering housing for the smooth running metering device.

■ The gauges and indicating calipers generally are inserted at the standardized clamping shank with a diameter of 8h6. This clamping shank has been manufactured of stainless steel, is hardened and microfinished. ■ The location hole measures 8H7 in diameter. On request the gauges can be equipped with a rear chucking bolt. ■ The gauges and metering instruments either are tested according to the respective DIN standard applicable or according to strict in-house standards and offer an utmost of accuracy and security. ■ The spindle has been manufactured of stainless steel, is grinded and microfinished. ■ In the initial position the pointers are set to zero. So the metering device will be under normal engagement conditions in the zero position and metering can directly be carried out. ■ The tolerance marks are for accurate setting of the desired dimensions. If requested the gauges can also be delivered without tolerance marks. Standard splash-proof gauges are not equipped with tolerance marks.

■ The gauge slides can be exchanged at any time and can be replaced with special gauge slides with connecting thread M 2,5. ■ Smooth running, easy to read and virtually constant measuring pressure guarantee rational and accurate metering at any time. This catalogue can only give an overview of our versatile wide range of manufacturing. Please feel free to ask for your specific kind of gauges and metering instruments. We will find a solution for your metering requir ments. We offer custom models as well as repair service. Constructive adjustments and design modifications due to technical developments are reserved. Offers are subject to our General Terms of Delivery.

Precision gauges and accessories Constructive features and dimensioned sketches

DIAL GAUGES INSTRUMENTS

Precision gauges and accessories Constructive features and dimensioned sketches

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

1

Dimensioned sketches for gauges and indicating calipers

Housing mm-display

Tolerance marks to be set

Pointer Glass ring diameter

Stroke scale

Clamping

Measuring Bolts Measuring use

Table of sizes and technical data for metric gauges Type

M5 M5/10 M10 a M10/80 a M10/100a M10 b M10/80 b M10/100 b M10 c M10/80 c M10/100c M10 d M10/80 d M10/100 d M20 M1 M1 ST M2 METEOR P M2 STO M2 K M2 STK M6 M6K M6 ST M7 M7 K M8 M9 M3 M1 STW M2W M2 RA M2 RAEX M3/1 M2 ST M2 ST-MD40 M2 ST-MD20 M2 STW M08/9 ST M08/9 STW M02/3 ST M04/3 ST M02/49 ST

Ud. Sheet Sketch No.

No.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 6 6 6 6 6

No.

Value of scale partition mm

0,1

0,01

0,005

0,01 0,02

0,01

Dimensions in mm

Metering range mm 5 10 10 10 10 20 20 20 30 30 30 50 50 50 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 10 10 5 6 5 10 10 10 10 ±0,8 ±0,8 ±0,2 ±:0,4 ±0,24

A 40 40 58 80 100 58 80 100 58 80 100 58 80 100 58 58 58 58 58 58 58 58 80 80 80 100 100 112 120 58 60 60 58 58 58 58 58 58 60 58 60 40 40 58

B 73,5 81,0 105,5 119,0 122,0 115,0 124,0 132,5 138,5 152,0 155,5 222,5 224,0 226,5 124,0 105,5 105,5 105,5 105,0 124,0 105,5 105,5 114,5 114,5 114,5 115,5 115,5 135,0 137,5 105,5 132,0 132,0 68,0 56,0 105,5 114,5 114,5 114,5 132,0 113,5 113,5 72,5 72,5 111,0

C 7,5 7,5 8,2 10,0 10,8 8,2 10,0 10,8 8,2 10,0 10,8 8,2 10,0 10,8 8,2 8,2 8,2 8,2 8,2 8,2 8,2 8,2 10,2 10,2 10,2 10,8 10,8 10,8 10,8 8,2 10,0 10,0 7,0 8,0 8,2 8,2 8,2 8,2 10,5 8,2 10,5 7,5 7,5 8,2

D 38,5 38,5

54,0

52,0

54,0

60,0 52,0 36,0

54,0

38,5 54,0

E 20,0 20,0 23,5 25,4 26,2 23,5 25,4 26,2 23,5 25,4 26,2 23,5 25,4 26,2 23,6 23,5 23,5 23,5 22,5 22,5 23,5 23,5 25,4 25,4 25,4 26,2 26,2 26,2 26,2 23,5 26,2 26,2 22,5 26,2 23,5 23,5 23,5 23,5 26,5 23,5 26,5 20,0 20,0 23,5

F 7,0

9,0

7,5

9,0

9,0

7,0 9,0

G 14,5 14,5 22,5 31,5 39,0 22,5 31,5 39,0 22,5 31,5 39,0 37,5 37,5 37,5 22,5 22,5 22,5 22,5 22,0 22,0 22,5 22,5 31,5 31,5 31,5 38,5 38,5 47,5 54,0 22,5 20,0 20,0 18,0 9,5 22,5 22,5 22,5 22,5 20,0 22,5 20,0 14,5 14,5 22,5

H 5,5 13,0 12,0 11,5 12,0 22,5 22,0 23,5 32,5 32,0 33,5 52,5 52,5 52,0 22,0 12,5 12,5 12,5 15,0 12,5 12,5 12,0 12,5 12,5 12,5 13,5 13,5 12,0 12,0 12,0 11,0 11,0 7,5 6,5 12,0 12,5 12,5 12,5 11,0 12,5 10,0 3,5 3,5 10,0

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

Table of sizes and technical data for metric gauges

DIAL GAUGES INSTRUMENTS

2

Table of sizes and technical data for metric gauges Type

Ud. No.

Sheet Sketch No.

No.

Value of scale partition mm

M04/9 ST 45 6 M02/3 STW 46 6 M04/3 STW 47 6 M02/49 STW 48 6 M04/9 STW 49 6 M2/30 50 7 M2/30 ST 51 7 M2/30/80 52 7 M2/30/80 ST 53 7 M2/30/100 54 7 M2/50 55 7 M2/50 ST 56 7 M2/50/80 57 7 M2/50/80 ST 58 7 M2/50/100 59 7 M2/80 60 7 M2/100 *) 61 7 M2/30 W 62 7 M2/30 STW 63 7 M2/50 W 64 7 0,01 M2/50 STW 65 7 MU 28 66 8 MU 32 67 8 M4 68 8 M4/1 69 8 M4ST 70 8 M4/5 71 8 METEOR P40 72 8 M4/5 ST 73 8 M4/5/1 74 8 M4/5 RA 75 8 M4/6 RAEX 76 8 MU 28 W 78 8 M4W 79 8 M4 STW 80 8 M4/5 W 81 8 M4/5 STW 82 8 FM4/05 83 9 FM4/05 ST 84 9 0,002 FM10/05 85 9 FM4/10 86 9 FM4/10 ST 89 9 HFM4/10 ST 90 9 FM10/1 ST 91 9 FM10/2 92 9 0,001 FM10/2/80 93 9 FM10/5 94 9 FM10/2 W 95 9 HFM10/1 ST 96 9 FM01/2 ST 97 9 FZ05/2 98 9 0,002 FZ10/1 99 9 0,001 *) Clamping shank diameter Ø 10h6 Technical modifications due to development reserved.

Dimensions in mm

Metering range mm ±0,45 ±0,2 ±0,4 ±0,24 ±0,45 30 30 30 30 30 50 50 50 50 50 80 100 30 30 50 50 3 3 3,5 3,5 3,5 5 5 5 5 5 6 3 3,5 3,5 5 5 1 1 1 1 1 1 1 2 2 5 2 1 ±0,09 0,2 0,1

A 58 45 45 60 60 58 58 80 80 100 58 58 80 80 100 58 58 60 60 60 60 28 32 40 40 40 40 40 40 40 40 40 28 45 45 45 45 40 40 58 40 40 40 58 58 80 58 60 58 58 62 62

B 113,5 96,0 96,0 132,0 113,5 138,5 138,5 147,5 147,5 155,5 179,0 179,0 147,5 147,5 197,0 312,0 382,0 175,0 175,0 236,0 236,0 54,0 66,0 72,0 72,0 72,0 73,5 78,0 73,5 73,5 66,0 54,5 68,5 95,0 95,0 96,5 96,5 80,0 80,0 112,0 80,0 80,0 77,0 93,0 105,0 114,5 105,0 132,0 111,5 105,0 108,0 108,0

C 8,2 8,7 8,7 10,5 10,5 8,2 8,2 10,0 10,0 10,8 8,2 8,2 10,0 10,0 10,8 10,0 8,2 10,5 10,5 10,5 10,5 5,3 6,3 7,6 7,6 7,6 7,6 6,8 7,6 7,6 6,8 7,0 5,3 8,6 8,6 8,6 8,6 6,8 6,8 7,8 6,8 6,8 6,8 8,7 8,7 10,2 8,7 10,2 8,0 8,7

D 54,0 38,5

54,0

59,0

59,0 59,0 54,0 54,0 59,0 59,0 22,0 30,0 38,5 38,5 38,5 38,5 37,0 38,5 38,5 37,0 36,0 22,0 38,5 38,5 38,5 38,5 37,0 37,0 52,0 37,0 37,0 37,0 54,0 54,0 54,0 54,0 54,0 52,0 54,0 53,0 53,0

E 23,5 21,2 21,2 26,5 26,5 23,5 23,5 26,2 26,2 27,0 23,8 23,8 26,2 26,2 27,0 26,2 25,5 26,2 26,2 26,2 26,2 17,3 18,8 20,0 20,0 20,0 20,0 20,5 20,0 20,0 19,7 25,0 17,3 21,0 21,0 21,0 21,0 20,5 20,5 22,5 21,6 21,6 21,6 23,5 23,5 26,2 23,5 26,2 25,0 23,5

F 9,0 7,0

9,0

8,5 9,0

5,5 6,5

7,0

5,6 7,0

7,5

9,0

G 22,5 14,5 14,5 20,0 20,0 22,5 22,5 31,5 31,5 39,5 20,0 20,0 31,5 31,5 36,8 55,0 70,5 16,5 16,5 18,5 18,5 13,0 15,0 14,5 14,5 14,5 14,5 16,0 14,5 14,5 16,5 9,5 8,9 15,0 15,0 15,0 15,0 15,5 15,5 22,0 15,5 15,5 15,5 32,0 22,5 31,5 22,5 20,0 22,0 22,5 18,0 18,0

H 12,0 3,5 3,5 11,0 11,0 32,5 32,5 32,0 32,0 32,5 51,5 51,5 52,0 52,0 50,5 85,0 106,0 32,5 32,5 50,5 50,5 5,5 5,0 4,0 4,0 4,0 6,0 7,5 6,0 6,0 8,0 6,5 3,5 3,5 3,5 5,5 5,5 8,0 8,0 14,0 8,0 8,0 8,0 1,5 12,0 12,5 11,5 11,0 15,0 9,5 33,0 33,0

Gauges with scale partition of 0, 1 mm

DIAL GAUGES INSTRUMENTS

Gauges with scale partition of 0, 1 mm ➤ Rotable stroke scale ➤ Tolerance marks to be set ➤ Clamping shank made of stainless steel, hardened and microfinished ➤ Spindle made of stainless steel, microfinished ➤ Gauge slide M2,5 exchangeable, solid construction for many applications ➤ If requested: Without tolerance marks, rear chucking bolt

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

3

Gauges with scale partition of 0,1 mm Type M5 M5/10 M10 a M1 0/80 a M10/100 a M10 b M1 0/80 b M10/100 b M10 c M1 0/80 c M10/100 c M10 d M1 0/80 d M10/100 d M20 All dimensions in mm

No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Metering range Glass ring diameter Number of pointers 5 10 10 10 10 20 20 20 30 30 30 50 50 50 20

40 40 58 80 100 58 80 100 58 80 100 58 80 100 58

Dimensions according to table of sizes

Almost all types can also be delivered in inch dimensions. Custom-made models are manufactured according to sketches and requirements.

1 1 1 1 1 2 2 2 2 2 2 2 2 2 1

Metering range per pointer rotation 5 10 10 10 10 10 10 10 10 10 10 10 10 10 20

Stroke scale partition 0-5

0-10

0-20

Standard- and large-scale gauges with scale partition of 0,01 mm and 0,005 mm

DIAL GAUGES INSTRUMENTS

Standard- and large-scale gauges with scale partition of 0,01 mm and 0,005 mm ➤ Rotable stroke scale ➤ Tolerance marks to be set ➤ Clamping shank made of stainless steel, hardened and microfinished ➤ Spindle made of stainless steel, microfinished ➤ Gauge slide M2,5 exchangeable, solid construction for many applications ➤ If requested: Without tolerance marks, rear chucking bolt

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

4

Standard- and large-scale gauges with scale partition of 0,01 mm and of 0,005 mm scale partition 0,01 mm Type

No.

Metering

Glass ring diameter

Number of

range

Pointers M1 16 58 1 M1 STO 17 58 1 M2 18 58 2 METEOR P 19 58 2 M2 STO 20 58 2 M2K 21 58 2 M2 STK 22 10 58 2 M6 23 80 2 M6 K 24 80 2 M6ST 25 80 2 M7 26 100 2 M7K 27 100 2 M8 28 112 2 M9 29 120 2 M3 30 5 58 2 Splash-proof model, with non-rotable glass ring, without tolerance marks M1 STOW 31 10 60 1 M2W 32 10 60 2 With rear drive ( EX = excentric arrangement of the feeler bar) M2/5 RA 33 5 58 2 M2 RAEX 34 6 58 2 Scale partition 0,005 mm M3/1 35 5 58 2 All dimensions in mm Dimensions according to the table of sizes ST : Shock-proof

Metering range per

Stroke scale

pointer rotation

partition

1

0-100

0,5

0-50

1 1

0-100

1 1

0-100

0,5

0-50

Clamping shank diameter 8h6

K : Concentric pointer for display of rotation METEOR P : Gauge model at a favourable price but nevertheless an accurately working model

O : Shock-proof standard gauge without pointer micrometer adjustment In the case of the shock-proof models the metering gearing is protected against damages caused by shocks of the feeling bar to guarantee the accuracy in metering. The splash-proof gauges are equipped with a bellow preventing that moisture and dirt enter into the housing. These gauges are additionally equipped with an upper protecting cap and a rear sealing. Together with the special non-rotable glass ring without tolerance marks this equipment provides a very effective sealing against oil and splash-water. If required the gauges optionally can be equipped at a surplus price with tolerance marks. Almost all models can be supplied in inch dimensions. Custom-made models are manufactured according to drawings and requirements.

Shock-proof

Shock-proof precision gauges of the new generation

DIAL GAUGES INSTRUMENTS

Shock-proof precision gauges of the new generation ➤ New computer-optimized fine gearing ➤ Extraordinary solid metal housing ➤ All workpieces are made of metal ➤ With pointer fine adjustment ➤ Clamping shank made of stainless steel, hardened and superfinished ➤ Spindle made of stainless steel, superfinished ➤ Accurate and safe metering, easy to handle, very durable ➤ German precision Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

5

Shock-proof precision gauges of the new generation Type

No.

Metering range

Glass ring diameter

M2 ST

36

10

58

M2 ST-MD 40

37

10

58

M2 ST-MD 20

38

10

58

Number of pointers

Metering range per Pointer rotation

Stroke scale partition

Metering pressure cN

Shockproof

80 2

1

0-100

40 20 **)

Splash-proof model with fixed glass ring, without tolerance marks M2 STW

39

All dimensions in mm Clamping shank diameter 8h6

10

60

2

1

0-100

80

Dimensions in mm **) : Sortable for vertical application only

Options: - Metering pressure exceeding 80 cN - Metering pressure 18 cN, with ball bearing travelled spindle – model with only one pointer - Metal glass ring - Bocked pointer fine adjustment - Special clock faces, custom imprint - Rear chucking bolt E - Setting of maximum pointer - Magnetic rear In case of the shock-proof models the metering gearing is protected against damages caused by shocks to the spindle to guarantee the accuracy in metering. The splash-proof gauges are equipped with a bellow preventing that moisture and dirt enter into the housing. These gauges are additionally equipped with an upper protecting cap and a rear sealing. Together with the special non-rotable glass ring without tolerance marks this equipment provides a very effective sealing against oil and splash-water. If required the gauges optionally can be equipped price with tolerance marks (to be charged). Almost all types can also be delivered in inch dimensions. Custom-made models are manufactured according to drawings and requirements.

Shock-proof safety gauges with free lift

DIAL GAUGES INSTRUMENTS

Shock-proof safety gauges with free lift ➤ Accurate metering within one pointer rotation ➤ The displaying space has been limited to a little bit less than one pointer rotation, that means less than 360° ➤ So erroneous reading of a complete millimeter - as possible with normal gauges - are eliminated and full safety is guaranteed along with accurate metering ➤ Shock-proof ➤ Gauge slide M2,5 exchangeable

➤ Easy to handle as inserting of the samples into the metering device can be made very easy thanks to the free lift ➤ Extraordinary solid metal housing ➤ Stroke scale rotable ➤ Tolerance marks to be set ➤ Clamping shank made of stainless steel, hardened and microfinished ➤ Spindle made of stainless steel, microfinished

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

6

Shock-proof safety gauges with free lift Metering Glass ring Number of range diameter pointers M02/3 ST 42 0,01 ±0,2 40 1 M04/3 ST 43 0,01 ±0,4 40 1 M08/9 ST 40 0,02 58 1 ±0,8 M02/49 ST 44 0,01 ±0,24 58 1 M04/9 ST 45 0,01 ±0,45 58 1 FM01/2 ST 97 0,001 ±0,09 58 1 Splash-proof model with fixed glass ring, without tolerance marks M02/3 STW 46 0,01 ±0,2 45 1 M04/3 STW 47 0,01 ±0,4 45 1 M08/9 STW 41 0,02 ±0,8 60 1 M02/49 STW 48 0,01 ±0,24 60 1 M04/9 STW 49 0,01 ±0,45 60 1 Type

No.

Scale partition

All dimensions in mm

Dimensions according to table of sizes

ST : Shock-proof

Clamping shank diameter 8h6

4,5 4,5 9 3 9 2,5

Stroke scale partition 20-0-20 40-0-40 80-0-80 24-0-24 45-0-45 90-0-90

4,5 4,5 9 3 9

20-0-20 40-0-40 80-0-80 24-0-24 45-0-45

Free lift

Shock-proof

W : Splash-proof model, with fixed glass ring, without tolerance marks

In case of the shock-proof models the the metering gearing is protected against damages caused by shocks of the feeling bar to guarantee the accuracy in metering. The metering range is limited to less than a complete pointer rotation in order to avoid erronneous readings. This guarantees SAFETY in all metering proceedings. Because of the extended free lift inserting of samples can be handled very easily. The splash-proof gauges are equipped with a bellow preventing that moisture and dirt enter into the housing. These gauges are additionally equipped with an upper protecting cap and a rear sealing. Together with the special non-rotable glass ring without tolerance marks this equipment provides a very effective sealing against oil and splash-water. If required the gauges optionally can be equipped at a surplus price price with tolerance marks. Almost all types can be supplies in inch dimensions. Custom-made models are manufactured according to drawings and requirements.

Gauges with a scale partition of 0,01 mm and large-scale metering range

DIAL GAUGES INSTRUMENTS

Figure minimized

Gauges with a scale partition of 0,01 mm and large-scale metering range ➤ Safe and conceutric reading by concentric millimeter indication ➤ Clamping shank made of stainless steel, hardened and microfinished ➤ Spindle made of stainless steel, microfinished ➤ Gauge slide M 2,5 exchangeable ➤ On request: Supply without tolerance marks, rear chuck bolt

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

7

Gauges with scale partition of 0,01 mm and large-scale metering range Metering Number of Glass ring diameter range pointers M2/30 50 30 58 M2/30 ST 51 30 58 M2/30/80 52 30 80 M2/30/80 ST 53 30 80 M2/30/100 54 30 100 M2/50 55 50 58 M2/50 ST 56 50 58 2 M2/50/80 57 50 80 M2/50/80 ST 58 50 80 M2/50/100 59 50 100 M2/80 60 80 58 61 100 58 M2/100 ✹) Splash-proof model with fixed glass ring, without tolerance marks M2/30 W 62 30 60 M2/30 STW 63 30 60 2 M2/50 W 64 50 60 M2/50 STW 65 50 60 Type

No.

All dimensions in mm

Dimensions according to table of sizes

ST : Shock-proof

Clamping shank diameter 8h6

Metering range per pointer rotation

Stroke scale partition

1

0-100

1

0-100

Shock-proof

✹) 10h6

In case of the shock-proof models the metering gearing is protected against damages caused by shocks of the feeling bar to guarantee the accuracy in metering. The splash-proof gauges are equipped with a stripping device preventing that moisture and dirt enter into the housing. These gauges are additionally equipped with an upper protecting cap and a rear sealing. Together with the special non-rotable glass ring without tolerance marks this equipment provides a very effective sealing against oil and splash-water. If required the gauges optionally can be equipped at a surplus price with tolerance marks. Almost all types can also be supplied in inch dimensions. Custom-made models are manufactured according to drawings and requirements.

Small gauges with scale partition of 0,01 mm

DIAL GAUGES INSTRUMENTS

Small gauges with scale partition of 0,01 mm By their compact construction these small gauges are especially suited for metering in limited spaces and for integration into measuring devices, tools and machines.

➤ Stroke scale rotable, tolerance marks to be set ➤ Gauge slide M 2,5 exchangeable ➤ On request: Without tolerance marks, rear chuckbolt ➤ Clamping shank madeof stainless steel, hardened and precision-finished ➤ Spindle made of stainless steel, microfinished ➤ German precision

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

8

Small gauges with scale partition of 0,01 mm Metering Glass ring Number of range diameter pointers MU28 66 3 28 MU32 67 3 32 M4 68 3,5 40 M4/1 69 3,5 40 M4 ST 70 3,5 40 2 M4/5 71 5 40 METEOR P40 72 5 40 M4/5 ST 73 5 40 M4/5/1 74 5 40 With rear drive (EX = eccentric arrangement of the feeling bar) M4/5 RA 75 5 40 2 M4/6 RAEX 76 6 40 2 Splash-proof model, with fixed glass ring, without tolerance marks MU28 W 78 3 28 M4W 79 3,5 45 M4 STW 80 3,5 45 2 M4/5 W 81 5 45 M4/5 STW 82 5 45 Type

No

All dimensions mm

Dimensions according to table of sizes

ST : Shock-proof

Clamping shank diameter 8h6

Metering range per pointer rotation

Stroke scale partition

0,5

0-50

1

0-100

0,5

0-50

1

0-100

0,5 1

0-50 0-100

0,5

0-50

Shock-proof

METEOR P40 : Gauge model at a favourable price but nevertheless an accurately working model In case of the shock-proof models the metering gearing is protected against damages caused by shocks of the spindle to guarantee the high accuracy in metering. The splash-proof gauges are equipped with a bellow preventing that moisture and dirt enter into the housing. These gauges are additionally equipped with an upper protecting cap and a rear sealing. Together with the special non-rotable glass ring without tolerance marks this equipment provides a very effective sealing against oil and splash-water. Almost all types can also be supplied in inch dimensions. Custom-made models are manufactured according to drawings and requirements.

Dial bench gauges and indicating calipers with a scale partition of 0,001 mm and of 0,002 mm

DIAL GAUGES INSTRUMENTS

Dial bench gauges and indicating calipers with a scale partition of 0,001 mm and of 0,002 mm ➤ Solid construction to meet high requirements for the models working with a gearwheel transmission metering device as well as for models working with a lever transmission metering device ➤ Essential positions of the metering devices with balance jewel bearings ➤ High indicating accuracy, smooth running and high durability

➤ Suited for accurate comparison meterings ➤ Clamping shank made of stainless steel, hardened and microfinished ➤ Spindle made of stainless steel, microfinished ➤ Gauge slide M 2,5 exchangeable ➤ On request: Without tolerance marks, rear chuck bolt

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

9

Dial bench gauges and indicating calipers with scale partition of 0,001 mm and 0,002 mm Metering Glassring Number of range diameter pointers Dial bench gauges with scale partition of 0,002 mm FM4/05 83 1 40 FM4/05 ST 84 1 40 2 FM10/05 85 2 58 Dial bench gauges with scale partition of 0,001 mm FM4/10 86 1 40 FM4/10 ST 89 1 40 HFM4/10 ST 90 1 40 FM10/1 ST 91 1 58 FM10/2 92 2 58 2 FM10/2/80 93 2 80 FM10/5 94 5 58 FM10/2 W 95 2 60 HFM10/1 ST 96 1 58 FM01/2 ST 97 ±0,09 58 1 Fine pointer 0,002 mm scale partition DIN 879 FZ05/2 98 0,2 1 Indicating calipers with scale partition of 0,001 mm according to DIN 879 FZ10/1 99 0,1 1 All dimensions in mm Dimensions according to table of sizes Type

No.

ST : Shock-proof

Metering range per pointer rotation

Stroke scale partition

0,2

0-100-0 0-100-0 0-100

0,2 0,2 0,1 0,2 0,2 0,2 0,2 0,2 0,1

Shock-proof

0-100-0 0-100-0 0-100 0-100-0 0-100-0 0-100-0 0-100-0 0-100-0 0-100 90-0-90 25-0-25 50-0-50

Clamping shank- Ø 8h6

W : Splash-proof model with fixed glass ring, without tolerance marks In the case of the shock-proof models the metering gearing is protected against damages caused by shocks of the spindle to guarantee the accuracy in metering. The splash-proof dial bench gauges are equipped with a bellow preventing that moisture and dirt enter into the housing. These gauges are additionally equipped with an upper protecting cap and a rear sealing. Together with the special non-rotable glass ring without tolerance marks this equipment provides a very effective sealing against oil and splash-water. FM : Dial bench gauges of the series FM work with a toothed gearing which guarantees high accuracy and high durability. In spite of the high resolution metering ranges up to 5 mm can be offered. HFM : Dial bench gauges of he series HFM are manufactures with a metering device operating with lever transmission. This increases again the accuracy compares to traditional dial bench gauges, so that is was possible to nearly cut in half the deviation range fe and the range of metering value reversal fu. FZ :

Indicating calipers metering according to DIN 879 show an utmost of accuracy with limited metering range and correspond to the high DIN requirements.

Almost all types can also be supplied in inch dimensions. Custom-made models are manufactured according to drawings and requirements.

Inch Dial Gauges

DIAL GAUGES INSTRUMENTS

Inch - Dial Gauges ➤ Rotable stroke scale ➤ Tolerance marks to be set ➤ Clamping shank made of stainless steel, hardened and microfinished ➤ Spindle made of stainless steel, microfinished ➤ Gauge slide M2,5 exchangeable, solid construction for many applications ➤ If requested: Without tolerance marks, rear chucking bolt

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

10

Inch-Dial Gauges Typ

Z4 Z4/5 Z1 Z2 Z6 Z1/1 Z2/1 METEOR PZ Z1/2 Z2/2 Z2/30 Z2/30-80 Z2/50 Z2/50-80 Z2/1/30 Z2/1/30-80 Z2/1/50 Z2/1/50-80 ZFM4/10 ZFM10/1 ST ZFM10/2 ZFM10/5 ZFZ10/1

Skale partition inch .001 .001 .001 .001 .001 .001 .001 .001 .001 .0005 .001 .001 .001 .001 .001 .001 .001 .001 .0001 .0001 .0001 .0001 .00005

Metering range inch .140 .200 .400 .400 .400 .400 .400 .400 .400 .400 1.200 1.200 2.000 2.000 1.200 1.200 2.000 2.000

Glasring diameter inch 1.575 1.575 2.283 2.283 3.150 2.283 2.283 2.283 2.283 2.283 2.283 3.150 2.283 3.150 2.283 3.150 2.283 3.150

Number of Pointers

.040 .040 .080 .200 .004

1.575 2.283 2.283 2.283

2 2 2 2 1

2 2 1 2 2 1 2 2 1 2 2 2 2 2 2 2 2 2

Metering range per Pointer rotation inch .020 .020 .040 .040 .040 .100 .100 .100 .050 .050 .040 .040 .040 .040 .100 .100 .100 .100 .010 .008 .008 .008

Stroke scale partition 0-20 0-20 0-40 0-40 0-40 0-100 0-100 0-100 0-50 0-100 0-40 0-40 0-40 0-40 0-100 0-100 0-100 0-100 0-10 0-80 0-80 0-80 20-0-20

The comments marked accordingly under measuring gauges are also available in the following versions are available at extra price: F : Fine adjustmen t (only in combination with shock -proof). ST : shock-proof The metering gearing is protected against damages caused by shocks of the feeling bar to guarantee the accuracy in metering. W : Splash-proof The splash-proof gauges are equipped with a bellow preventing that moisture and dirt enter into the housing. These gauges are additionally equipped with an upper protecting cap and a rear sealing. Together with the special non -rotable glass ring without tolerance marks this equipment provides a very effective sealing against oil and splash -water. If required the gauges optionally can be equipped at a surplus price with tolerance marks. All Inch-Gauges are delivered with standard Schaft - Ø .315" (8 mm) and button thread M2,5. Almost all models can be supplied in inch dimensions. Custom-made models are manufactured according to drawings and requirements.

Remarks

ST, W ST, W ST, W ST, W ST, W ST, W, F ST, W, F W W

ST ST W

Digital gauges

DIAL GAUGES INSTRUMENTS

Digital gauges ➤ Digital gauges with data port at favourable prices ➤ Solid metering instruments, easy to operate ➤ Equipped with all important features and functions ➤ Capacitive metering system ➤ Error-free reading of metering values

➤ Favourable construction dimensions allow use even in limited spaces ➤ Off-line power supply at extraordinary low energy consumption ➤ Stainless clamping shank, hardened and grounded ➤ Gauge slides exchangeable, thread M 2,5

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

11

Digital gauges DG 100

DG 1000

DG 1000/25

Value of figure steps

0,01 mm

0,001 mm / .00005“

0,001 mm / .00005“

Metering range

12,5 mm

25 mm / 1/2“

25 mm / 1“

Indication

LCD digital

Figure height

6 mm

Traversing speed

6 mm

8,5 mm

1,5 m/sec

Operating temperature

+5°C bis +40°C

Battery

lithium 3V

Battery life

apprx. 4.000 h

Data port

opto RS 232

Clamping shank

8h6

Feeling bar

hardened stainless steel

Gauge slide

M 2,5

Functions

Accuracy Repeatability

setting to sero change-over mm/inch hold

setting to zero change-over mm/inch hold

data transmission REF I, REF II

data transmission REF I, REF II

15μ

8μ

5μ

3μ (±2s)

2μ (±2s)

2μ (±2s)

Options Cable opto RS 232 (2 m) Wire lifting device Displaying units on request

DG 100; DG 1000

DG 1000/25

setting to zero change-over mm/inch hold change-over of the counting device data transmission REF I, REF II PRESET

Accessories for gauges

DIAL GAUGES INSTRUMENTS

Accessories for gauges

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

12

Accessories for gauges D : Wire ventilation E : Rear chuck bolt G : Glass ring fixing device ( for diameters of 40 and 58 mm) H : Ventilation lever M : Magnetic rear (equipped with permanent magnent with high adhesive force) SZ : Maximum indicatoring device (for diameters of 58 and 80 mm) Flat metal rear Reversed spring tension Feeling bar brake

Custom-made models are manufactured according to drawings and requirements.

Rear chuck bolt for a diameter of Ø 58 mm

Rear chuck bolt for a diameter of Ø 40 mm

Standard gauge slides with M 2,5 connecting thread

DIAL GAUGES INSTRUMENTS

Standard gauge slides with M 2,5 connecting thread T = Steel H = Hard alloy S = Sapphire R = Ruby f = Flat k = Spherical Connecting thread M 2,5 Dimensions in mm

Custom-made gauge slides can be manufactured on request. Please let us have your drawing or your sketch.

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

13

Standard gauge slides M 2,5 Ø 4 mm

Lever gauges DIN 2270

DIAL GAUGES INSTRUMENTS

Lever gauges DIN 2270 ➤ These length measurement devices with angle-movable gauge slide transmit the excursion of this gauge slide via a mechanical system to the pointer ➤ These gauges are used e.g. in tool manufacturing, in workshops and in checking applications

➤ Parallism, measuring of shape and position deviation like concentricity or surface eveness can easily and quickly be carried out, thus in a cost effective way ➤ The gauges are handy to use and can also be applied in limited spaces

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

14

Lever gauges according to DIN 2270 Type

Scale partition

Metering range

Glass ring diameter

Stroke scale partition

Length of the feeler

DIN 2270 Form A 1-32 A

0,01

0,8

32

0-40-0

12

1-40 A

0,01

0,8

40

0-40-0

12

1-32 AL

0,01

0,5

32

0-25-0

35

1-40 AL

0,01

0,5

40

0-25-0

35

4-32 A

0,002

0,2

32

0-100-0

12

4-40 A

0,002

0,2

40

0-1k00-0

12

DIN 2270 Form B 2-32 B

0,01

0,8

32

0-40-0

12

2-40 B

0,01

0,8

40

0-40-0

12

2-32 BL

0,01

0,5

32

0-25-0

35

2-40 BL

0,01

0,5

40

0-25-0

35

5-32 B

0,002

0,2

32

0-100-0

12

5-40 B

0,002

0,2

40

0-100-0

12

DIN 2270 Form C 3-32 C

0,01

0,8

32

0-40-0

12

3-40 C

0,01

0,8

40

0-40-0

12

3-32 CL

0,01

0,5

32

0-25-0

35

3-40 CL

0,01

0,5

40

0-25-0

35

6-32 C

0,002

0,2

32

0-100-0

12

6-40 C

0,002

0,2

40

0-100-0

12

All dimensions in mm

Dimensions according to table of sizes

These devices distinguish themselves by a high sensitiveness and accuracy together with solid construction and indifference to shocks. Automatic switching over of the metering direction. Error-free reading because the rotation direction always is the same for all forms. The housings are equipped with 3 milled dovetail guidances for inserting the clamping shank. The precise metering device with ruby-bearing guarantees high accuracy. Bearing of the lever gauge shaft in mini precision ball bearings. Exchangeable gauge slide equipped with hard alloy ball, pivotable by 2400°. Clock face rotable with the knurled glass ring. Standard accessory : 1 gauge slide with hard alloy ball Ø 2 mm, 1 key for replacing the gauge slide 1 clamping shank Ø 8h6, case

Clamping shank - Ø SZ 4 SZ 8

4

All dimensions in mm

8

Gauge slide ball-Ø

Hard alloy ball

Ruby ball

2

X

-

0,4

X

-

FHME 1

1

X

-

FHME 3

3

X

-

FHME 2-R

2

-

X

FHME 2-L

2

X

-

FHME 1-L

1

X

-

FHME 3-L

3

X

-

FHME 2-LR

2

-

X

FHME 2 FHME 0,4

Accessories for lever gauges

DIAL GAUGES INSTRUMENTS

Key for gauge slide FHHA 8

Holder with location hole Ø 8 Magnetic gauge stand

MST 2

Overall height:

140

Max. capacity:

100

Magnet:

Ø 40

Adhesive forcet:

6 kg

Location hole:

8H6

Accessories for lever gauges

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

15

Sketches for lever gauges Form

Dimension

All dimensions in mm

A, B, C

D

32,0

40,0

A, B, C

E

5,6

6,0

A, B, C

L

A

G

7,1

7,5

B

H

69,5

73,5

B

G

7,7

8,1

C

G

7,5

7,9

Form A DIN 2270

12 oder 35

Form B DIN 2270

Form C DIN 2270

Depth metering gauges

DIAL GAUGES INSTRUMENTS

Depth metering gauges ➤ These devices are used for metering depths, e.g. hole depths or groove depths as well as for testing surfaces ➤ The metering depth can be extended as far as needed with a toothed rack extension in steps of 10 mm ➤ Convenient pointer home position bys the rotably knurled glass ring resp. the button for setting to zero

➤ High durability by rugged construction and solid manufacturing ➤ The metering bridges are hardened, gunmetal-finished and fine lobated ➤ On request mat chromium plated metering bridges can be supplied at a surplus price ➤ The gauge slide M 2,5 can be replaced by any other form depending on the application

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

16

Depth metering gauges Depth metering bridges without gauge Type Length L Width TM48 50 16 TM48 50 16 TM48 80 16 TM48 80 16 TM48 100 16 TM48 100 16 TM48 150 20 Depth metering devices with gauge Type Length L Model M2 - TM80 80 B M2/30 - TM80 80 B DG100 -TM80 80 B DG1000 -TM80 80 B

Model B MC B MC B MC B Scale partition 0,01 0,01

Figure step

0,01 0,001

As standard device with special feeler T17 L = 15 mm B : gunmetal finished

MC : matt chromium plated

Insert for shank-Ø 8h6

All dimensions in mm Custom-made models are manufactured according to drawings and requirements.

Metering range 10 30 12,5 12,5

Thickness gauging devices

DIAL GAUGES INSTRUMENTS

Thickness gauging devices ➤ These thickness gauging devices are especially suited for quick and reliable metering of the most various materials like cardboard, paper, felt, rubber, leather, glass, film, plastics or plywood ➤ These thickness gauging devices can be universally applied because they are supplied as handy, small models which can be used manually but also stationarily

➤ Convenient pointer home position bys the rotably knurled glass ring ➤ High durability by rugged construction and solid manufacturing ➤ In finding solutions for your metering applications you are supported by a wide range of standard devices

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

17

Depth metering gauges Type

Scale partition mm

Without gauge, insert 8H7 SM 12 SM 15 SM 18 SM 20 SM 50-35 SM 50-70 FB 150 FB 200 FB 300 FB 400 With mounted gauge DMG10 0,1 DMG 10/2 0,1 DMG 11 0,1 DMG 11 H 0,1 With ventilating lever DMG 11/ 20 0,1 DMG 11/ 30 0,1 DMG 11/ 50 0,1 DMG 11/100 0,1 DMG 11/200 0,1 DMG 11/300 0,1 DMG 11/400 0,1 DMG 20 DMG 21 DMG 22 DMG 23 DMG 23 H With ventilating lever DMG 24 DMG 24 OS DMG 25 DMG 26 DMG 27 DMG 28 DMG 30 Feeler forms

Metering range with gauge mm

Metering range of the shackle without gauge mm

Shackle depth

5 10 10 10 10 10 10 10 10 10

15 10 20 20 45 45 20 20 30 30

30 30 60 70 35 70 150 200 300 400

mm

Feeler forms Standard

On request

10 20 10

15 15 50

W W A

X,Y,Z X,Y,Z B,C,D,E

10

50

A

B,C,D,E

20 30 50 30 30 30 30

50 50 50 100 200 300 400

A A A A A A A

B,C,D,E B,C,D,E B,C,D,E B,C,D, E B,C,D, E B,C,D, E B,C,D, E

0,01 0,01 0,01 0,01

8 10 10 10

12 18 45 50

W W W A

Z X,Y,Z X,Y,Z B,C,D,E

0,01

10

50

A

B,C,D,E

0,01 0,01 0,01 0,01 0,01 0,01

5 5 10 10 30 10

50 50 100 200 200 400

Rollers with lateral plates Rollers without lateral plates A B,C,D,E A B,C,D,E A B,C,D,E A B,C,D,E

0,001

1

30

0 6,35 flat

On request the thickness metering gauges SM and FB can be equipped with suitables gauges. When ordering please indicate the feeler form desired as otherwise the device will be supplied with the standard feelers. Almost all models can be supplied in inch dimensions. Custom-made models are manufactured according to drawings and requirements.

Tyre engraving metering devices

DIAL GAUGES INSTRUMENTS

Tyre engraving metering devices According to the German StVZO pneumatic tyres of motor vehicles and trailers must show over the entire extend of the entire width tread groves or indents with a depth of at least 1,6 mm. ➤ The tyre checker for testing the tyre tread grooves of passenger cars and trucks ➤ Easy to handle ➤ Direct result reading ➤ Safety for you and your car

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

18

Tyre engraving metering devices Type

Scale partition (reading possibility)

Metering range

Glass ring diameter

RT 10

0,1

10

58

RT 25

0,1

25

58

RT 30

0,1

30

58

All dimensions in mm

Electric operated gauges

DIAL GAUGES INSTRUMENTS

Electric operated gauges ➤ Extraordinary solid housing as protection for the smooth running metering device ➤ Connecting dimensions according to DIN 878 ➤ Electric limit contacts can be set covering the entire metering range ➤ Control port ➤ Shank made of stainless steel, hardened and superfinished

➤ Spindle made of stainless steel superfinished ➤ The rotable stroke scale allows for setting to zero at any pointer position ➤ Gauge slide M 2,5 exchangeable ➤ On request: Rear chucking bolt

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

19

Elektronic operated gauges Type

Metering range

Glass ring diameter

Number of pointers

Scale partition 0,1 mm M10 el 10 58 1 M10/80 el 10 80 1 Scale partition 0,01 mm M2 el 10 58 M2 el W 10 60 M2 el K 10 58 M6 el 10 80 2 M6 el W 10 80 M6 el K 10 80 M7 el ST 10 100 Scale partition 0,001 mm M2/10 el 2 58 M2/10/80 el 2 80 2 M2/10/5 el 5 58 The adjustable contact path corresponds to the respective metering range of the gauge. Options: - angeflanschte signal indicator „S“ - floating relay contact for el-gauges (1 Wechsler)

All dimensions in mm

Measurements according sketch below

K : Concentric pointer for the rotation indicator W : Splash-proof model Almost all models can also be supplied in inch dimensions. Custom-made models are manufactured according to drawings and requirements. Dimensioned sketch

Metering range per pointer rotation

Stroke scale partition

10 10

0-10 0-10

1

0-100

1

0-100-0

Hardness testing gauge Shore A

DIAL GAUGES INSTRUMENTS

Hardness testing gauge Shore A ➤ Pocket size precision hardness testing gauge MUS 221 for determining the Shore-A-Hardness DIN 53505 ➤ For testing samples and manufactured articels made of soft rubber, caoutchouc, soft plastics and similar plastics

➤ Handy but stable construction by taking over the modules of the most proven RAMBOLD-precision gauges ➤ Direct reading of the shore hardness on the stroke scale ➤ Supply with case and checking bridge

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

20

The RAMBOLD – hardness testing gauge MUS 221 is a handy, pocket-size precision gauge for determining the Shore A – hardness according to DIN 53 505. It is used for testing of samples and manufactured articels made of soft rubber, caoutchouc, soft plastics and similar plastics. The nickel-plated, solid yellow brass housing with an outside diameter of 58 mm was taken over from the well-known and well-proven RAMBOLD – precision gauges. The penetrating stamp has been realized in form of a truncated cone. In an unloaded condition the penetrating stamp stands out by 2,50 mm from the supporting surface of the hardness testing gauge. Via a ball-bearing shaft it is connected to a metering spring. When placing the gauge onto the sample to be tested the penetrating stamp will be pushed until the resistance force of the sample to be tested has been balanced with the reacting force. The path gone by the penetrating stamp is proportional to the Shore hardness and is transmitted via a metering gauge with pointer to a centesimal round stroke scale which directly shows the Shore hardness. Each scale spacing corresponds to a Shore-A- hardness. During the testing procedure the hardness gauge is pressed in a vibrationless way with the prescribed pressing force of 12,5 N against the sample to be tested until the supporting surface closely fits. Three seconds after the supporting surface has touched the sample to be tested the hardness can be read from the gauge. In the case of samples with distinct flow properties the hardness can also be read after a longer pressing time. Shore hardness

Path of the penetrating stamp

Spring resistance F mN Shore A ± 40

0

2,5 ± 0,02

550

10

1300

20

2050

30

2805

40 50

3555 linear characteristic curve

4305

60

5060

70

5810

80

6560

90

7310

100

0

a

Ø(3,00±0,10) mm

b

Ø(1,25±0,15) mm

c

(2,5±0,02) mm

d

(0,79±0,01) mm

r

(0,10±0,01) mm

f

Ø(18,0±0,50) mm

8065

Metering stands and metering tables

DIAL GAUGES INSTRUMENTS

Metering stands and metering tables ➤ The metering stands and metering tables have been developped for universal use in workshop and checking applications ➤ High durability by rugged construction and solid manufacturing ➤ Can be assembled with any gauge of the comprehensive RAMBOLD range of metering gauges ➤ A wide-range of serial devices helps you to find a solution for your metering application

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

21

Metering stands and metering tables Metering stands Characteristics MST 1 MST 2 MST 3 MST 5 MST 6 MST 7 MST 8 Hight of the stand column 140 200 280 with base plate mm Overall height mm 60 310 230 360 Ø Stand column mm 8 12 12 16 Ø Lateral arm mm 8 12 10 16 Range mm 100 150 260 150 180 150 Dimension base plate Fuß Ø 46 Ø 40 Ø 55 65X48 65X48 50X70 60X250 mm Adhesive force apprx. N 130 60 120 800 800 250 Weight kg 0,2 0,6 1,0 1,8 1,4 2,3 5,5 Metering range mm Remarks P P F,P E,F,H,S E,F,S E,F,S F,NM,S E: Magnet to be swtiched on/off F: Fine adjustment H: hydraulic clamping NM: non-magnetic base plate, grounded on all sides P: Permanent magnet S: Prismatic bottom IFH: This device is used for checking threaded holes on turning lathes and machine tools. Thanks to the small lever gauge also threaded holes up to 60 mm depth can be metered. The device can be inserted at the inserting spigot 8h6. WMG: This device is used for quick and accurate metering of tube sheets.

IFH

WMG

22 16 50

0,2

0,4 10

Metering tables Characteristics Overall height mm Metering range mm Range mm Length of lateral column mm Dimensions metering surface mm Table size mm Column diameter mm Weight kg Remarks

SM 25 150 40 25 Ø 20

1,2 L

SM 30 200 100 49

SM 40 200 100 49

Ø 50

60X68

SM 40-Q 200 100 100 120 60X68

22 3,2 L

22 3,5 L,Q

22 2,3 L

SM 50-Q-HG 320 180 200 230 150X200 260X150 35 9 HG,Q

L : Table surface grounded and lobated Q : Lateral column (with this model it is possible to reach each point of the metering surface for the respective metering) HG : The base of this metering table is made of natural stone (black granite). This material is resistent to wear and tear, harder than steel but free of corrosion, anti-magnetic und does not need any special maintenance. All metering stands and metering tables as a standard are supplied without metering gauge. The location hole for the metering gauge is 8H7. Custom-made models are manufactured according to drawings and requirements.

Concentricity metering devices

DIAL GAUGES INSTRUMENTS

Concentricity metering devices ➤ Easy and safe handling ➤ High durability by rugged construction and accurate manufacturing ➤ Can be assembled with any gauge of the comprehensive RAMBOLD range of metering gauges ➤ A wide-range of serial devices helps you finding a solution for your metering application

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

22

Concentricity metering devices Characteristics Maximum center distance mm Height of centers mm Length/width of the base plate mm Eveness of the base plate Groove width Degree of accuracy Lifting of the movable point mm Overall height with stand mm Weight kg Clamping range mm Metering range mm Distance of knurled nut – metering axis mm Metering range vertical mm Metering range horizontal mm Range mm Range horizontal Metering shackle Clearance of the horizontal metering shackle mm Remarks

44/1-50 200 50

44/1-75 200 75

44/2-50 350 50

44/2-75 350 75

RPG 44/3 450 100

350/11 0

350/11 0

500/110

500/110

700/180

45 40

DIN 876/1 10H7 1

46-50

46-75

50

75

200/110

200/110

47

DIN 876/1 10H7

8 260 8,0

260 9,0

260 11,0

260 12,0

320 35,0

200 2,8

260 4,5

260 5,5

1,8

0-20 100 40 50

60

50 50 P

P

R, S

R, S

S

P : Fitted prism in the case of tailstocks with 75 mm height of centers for inserting non-centered workpieces and longer parts, supporting range in the prism 5-20mm R : Concentricity accuracy of the sleeve 0,005 mm + tolerance of the collet chuck. S : Supply without collet chuck Collet chucks F10 are available with threaded holes measuring 3,0 bis 7,0 mm, smaller threaded holes can be realized on request All concentricity metering devices as a standard are supplied without metering gauge. The gauge location hole is ist 8H7. Custom-made models are manufactured according to drawings and requirements

Meteor C - Standard gauges with a scale partition of 0,01 mm at favourable prices

DIAL GAUGES INSTRUMENTS

Meteor C - Standard gauges with a scale partition of 0,01 mm at favourable prices ➤ Especially favourable cost-performance ratio ➤ Housing, board with metering gearing and adjustable metal glass ring ➤ Adjustable tolerance marks ➤ Exact metering, easy to handle and solid, workshop-suited model ➤ Gauge slide M2,5 exchangeable ➤ Connecting dimensions according to DIN 878

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

23

METEOR C - Standard gauges with scale partition of 0,01 mm at favourable prices Type METEOR CG METEOR CST METEOR CSTG

Metering range 10

Glass ring diameter 58

All dimensions in mm G : Glass ring fixing device ST : Shock-proof Modification of construction and design reserved

Number of pointers 2

Metering range per pointer rotation 1

Stroke scale partition 0-100

Shock-proof

Hand gauges for tensile force and for pressure force

DIAL GAUGES INSTRUMENTS

Hand gauges for tensile force and for pressure force ➤ Alternative for quick metering of smaller tensile forces and pressure forces at a favourable price ➤ Metering according to the spring principle ➤ Metering of the pressure force is made at the stamp, the tensile force metering is made at the ring resp. at the filament testing device equipped with maximum ➤ indicator which can also be supplied

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

24

Hand gauges for tensile force and for pressure force Type Metering range Tensile force (filementtesting device) FPR 4 0-4 N FPR 15 0- 15 N 0-40N FPR 40 Tensile force and pressure force FPRlD 4 0-4 N FPR/D 15 0- 15 N

Stroke scale partition

Remarks

0,1N 0,2N 1,ON

H H H

0,1N 0,2N

D,X D,X

D : At a surplus price the devices can be equipped with rear knuckle ring, with spigot or with threaded holes for fixing H : With crowned handle X : Can be supplied either with filement testing device or with hang-up ring Custom-made models are manufactured according to drawings and requirements.

MEASURING GAUGE FOR TOOTH ANGLES AND HEIGHT DIFFERENCE

WB 32

DESCRIPTON OF THE MEASURE INSTRUMENT The Measuring Gauge for tooth angles and height difference WB 32 (following Measure Instrument) is a precision optical-mechanical instrument for checking the cutting geometry of circular saw blades. This instrument is compact and extremly accurate thereby making it ideal for all applications. The unit is maintenance free and extremly simple to operate. The measuring instrument is supplied in a practical readiness bag. Against small surcharge you receive a suitable wood case. Versions Type WB 32 Standard (without Dial indicator) Type WB 32 Universal (special dial gauge with mm-division) Type WB 32 Universal Z (special dial gauge with Zoll-division)

TECHNICAL DATA up to 2400 mm of circular saw blade diameters, for tooth pitch 3... 70 mm (Standard version 0 ... 70 mm) • Stroke 6 mm, for difference measurement • Measuring surface hardened, ground and hard-chromed • Steel parts platet to prevent rust and tarnish • Cylindrical way polished, in self-lubricating, wear-proof bushings • Guidance ratio 3xD • Housing material special precision cast aluminium, sand blastet, coatet with a neutral preservative. Schutzanstrich • Angle scale aluminium, black anodized, engraved graduations • Special dial gauge graduation 1/100 mm or 1/1000 Zoll • Lens system multielement, with 7 fold magnification, free of distortion • Vision field of the 18 mm, chromatically corrected magnifying glass • Weight 520 g (standard version) 585 g (universal / universal Z version) • Dimensions 115 x 105 x 67 mm • Measure range

Measuring gauge for tooth angles and height difference WB 32

DIAL GAUGES INSTRUMENTS

GENERAL INFORMATION Please observe the notes in these operating instructions, in order that the device will function perfectly and remain operable for a long time. • Immediately after receipt of the goods that the measuring instrument not damaged and the ordered accessories are present. • Use the measuring instrument only intended. • Note the fact that the dial gauge has special translation and therefore only for circular saw blades can be used. • Make sure during the measurements that the hair cross plate will not damage. If necessary it is available as spare part. Tooth height differential measurement

Rambold GmbH & Co. KG • Am Krebsgraben 18 b • 78048 VS-Villingen • Tel. +49 [0]7721- 206 661-0 • Fax +49 [0]7721- 206 661-63 www.rambold-messgeraete.de • [email protected]

25

TOOTH GEOMETRY FOR CIRCULAR SAW BLADES

N T h

Use of proper tooth geometry assures long blade life and maximum cutting efficiency. The diagramm indicates the normal tooth geometry for circular saw blades.

α

b

t

45° S

N

T Tooth pitch t Gullet depth b Gullet diameter

V

γ

N

V

V

Cutting angle V Beveled tooth α Clearance angle N Square tooth h Tooth height differential S Tooth face to coolant channel

γ

TOOTH ANGLE MEASUREMENTS

11

12

8 2

1

1 Pointer 2 Setting lever 8 Magnifying glass

10 9

11 Knurled screw 12 Angle scale

γ 10 9

9 Horizontal cross hair

10 9

α 10 Vertical cross hair

MEASURING THE TOOTH HEIGHT DIFFERENTIAL (only WB 32 universal) → Release lever (3) of the dial indicator (4). → Place the support bars (7) of the instrument vertically on the tips of the beveled teeth (see illustration). Caution! Care should be taken not to scratch the cross hair of the lens. Note: Measuring edge (5) of the dial indicator (4) must be positioned on the top of the square tooth. → Set the dial indicator (4) in position 0. → Next place the instrument on the tips of the two square teeth. (7) → The height differential of the beveled and square teeth can now be read directly on the dial indicator (4).

3 4 6 5 7

3 Indicator lever 4 Dial indicator 5 Measuring edge

6 Knurled nut 7 Support bars

10/2004 - Modification reserved!

All measurements for tooth angles should be taken directly from the square teeth as these are more reliable than when taken from the beveled teeth. → Measurement should be taken with the blade held in a clock-wise direction, that is, the teeth pointing to the right. → Place pointer (1) by using lever (2) to the 0 position → Depress lever (3) of the dial indicator (4) downward to lock the measuring edge (5) in its „up“ position. → Loosen knurled nuts (6) and adjust the support bars (7) symmetrically according to the tooth pitch. The symmetry can be checked by observing the markings on the guide track for the knurled nuts. Note: The tooth to me measured must be properly positioned on the support bar surfaces (7). → These surfaces must lie on the tips of the beveled teeth. The instrument must then be pushed back so that the blade is against the vertical backing guide. Caution! Care should be taken not to scratch the cross hair of the lens. → The tooth shape will now appear in lens (8) magnified approximately 7 times. → Line up the horizontal cross hair (9) with the top of the tooth using the knurled screw (11). → Move the instrument sideways until the vertical cross hair (10) lines up with the tooth point. → Adjust lever (2) until the vertical cross hair (10) lines up with the face of the tooth. (II) Cutting angle γ can now be read on the angle scale (12). → Adjust lens (2) in a downward direction until the horizontal cross hair (9) is lined up with the top of the tooth (III). The clearance angle α can now be read on the angle scale (12).

DIAL GAUGES INSTRUMENTS

Rambold GmbH & Co. KG Am Krebsgraben 18 b 78048 VS-Villingen Tel. +49 [0] 7721- 206 661-0 Fax +49 [0] 7721- 206 661-63 www.rambold-messgeraete.de [email protected]