Plate Router PF 1200 E Precise and fast folding of aluminium composite sheets.

Tools for the toughest demands

At a glance

PF 1200 E

Modern milling. • Precise routing results with different material thickness thanks to an easily replaceable contact roller. • Mobility on the building site and easy transportation because of its lightness. • High economic efficiency thanks to high chip removal performance and rapid routing progress.

PF 1200 E Power consumption Speed range Router bit diameter/Routing depth Hose connection Weight

1200 Watt 1900 – 5200 rpm 118 mm/0 – 9 mm 27/36 mm 5.4 kg

With MMC Electronics Scope of delivery:

ELECTRONIC

AS

+

Accessories Blade cutter: V-grooving bit HW 118x14-90 degrees (Aluminium) V-grooving bit HW 118x18-135 degrees (Aluminium) Contact rollers Dibond: Contact roller D2 Contact roller D3 Contact roller D4 Contact roller D6 Contact rollers Alucobond: Contact roller A3 Contact roller A4 Contact roller A6 Contact roller A8

Part-no. 491470 Part-no. 491471 Part-no. Part-no. Part-no. Part-no.

491542 491543 491544 491545

Part-no. Part-no. Part-no. Part-no.

491538 491539 491540 491541

Shank cutter, 8 mm shank (for use in routers): V-grooving bit HW-D18-90 degrees (Aluminium) Part-no. 491444 V-grooving bit HW-D18-135 degrees (Aluminium) Part-no. 491443

PF 1200 E-Plus Alucobond® V-groove bit 90°, contact roller A4, setting gauge for guide rail, operating tool, (without guide rail) In a Systainer Order No.: 574197

+

PF 1200 E-Plus Dibond® V-groove bit 90°, contact roller D3, setting gauge for guide rail, operating tool, (without guide rail) In a Systainer Order No.: 574220

Lever clamp FS-HZ 160 Fitting width 160 mm, content: 1 clamp

Part-no. 491594

Clamp FSZ 120 Fitting width 120 mm, content: 2 clamps

Part-no. 489570

Connector FSV Connection for two guide rails

Part-no. 482107

Range of guide rails: FS 800/2 FS 1080/2 FS 1400/2 FS 1900/2 FS 2400/2 FS 3000/2 FS 5000/2

Length: Length: Length: Length: Length: Length: Length:

800 mm 1080 mm 1400 mm 1900 mm 2400 mm 3000 mm 5000 mm

Part-no. Part-no. Part-no. Part-no. Part-no. Part-no. Part-no.

491499 491504 491498 491503 491502 491501 491500

You can equip yourself perfectly using our comprehensive range. Here is a small extract from our product range. The complete range can be found in our catalogue or under www.festool.com

A perfect system at a glance ! Drilling and Screwdriving Cordless drill/drivers with FastFix – uniquely versatile!

Jigsaws TRION – even jigsaws need guidance.

Portable circular saws TS 55 – let us guide you to a leading position!

Routers Router OF 1010 – manoeuvrable and lively. Dust extraction CLEANTEC mobile dust extractor – breathe easily with – out breathing any dust in!

Plate router PF 1200 E Mobile professional for composite plates

Precise routing of aluminium composite boards is now also possible in mobile operation.

System benefits

Benefits at a glance.

The perfect router for exact grooves.

Outstanding results • Precise routing depth and exact maintenance of depth thanks to the changeable contact roller. • Straight, exact cuts, combined with workpiece protection through the guide rails and the use of the adjustment aid. • Rapid routing progress and a neat routing pattern thanks to the carbide-tipped blade cutter.

Absolutely unique: the PF 1200 E plate router is an expert in machining aluminium composite plates. It makes groove cutting really easy, even on building sites. Precise, neat and fast – a faultless V-groove is produced on the guide rail. This is achieved with the help of the proven Festool plunge-cutting principle with the guide rail system.

Time-saving and mobility • Mobility on the building site and easy transportation because of its lightness. • Rapid adaptation to different material thicknesses through the simple change of the contact roller. Low machine costs and long service life • High durability and ruggedness with the high-quality components and original Festool accessories. • Machine protection and long service life thanks to MMC Electronics with integrated smooth start-up and current and temperature control. Health and safety • Simple and safe handling through the proven plungecutting principle. • Optimum extraction of all chips working together with a Festool mobile dust extractor.

ELECTRONIC

AS

Aluminium cover plate (rear side)

Polyethylene core

Aluminium cover plate (front side)

The PF 1200 E is a compact plate router for fast and precise groove cutting – also on building sites.

90° router bit

135° router bit

Method

Routing and folding technique Composite plates can be shaped with an extremely easy processing technique. The process, the routing and folding technique, makes it possible to produce shaped products of all types and sizes. V-shaped grooves are routed into the rear side of the composite plates using blade cutters. Here, the aluminium cover plate on the front side and a part of the core material are left standing. The remaining material then allows you to fold it by hand.

Whether you are working with Alucobond® or Dibond®, optimum results are achieved in every material. System benefits

Plate router PF 1200 E

Blade cutter

Its success is guaranteed by the changeable contact roller and the blade cutter. The contact roller ensures precise routing depths. The router can only plunge into the material as far as the contact roller allows. The simple replacement of the contact roller and adjustment of the revolver means that the routing depth can be adapted to various material thicknesses.

Contact roller

90° or 135° grooves can be cut with the help of the changeable router bit. This makes it possible to bend to an interior angle of up to 45°.

Composite material

Changeable interior parts: contact roller for various material thicknesses and blade cutters for different angles.

www.festool.com

Your link to more information...

News and promotions

On the Festool site you can find information about

Online product catalogue

• • • • •

Online shop Dealer search

Test reports

new products helpful application examples our comprehensive service offer the complete product range product features in detail

And all of this at your leisure.

Service Application examples

3D animations

Our customers benefit from our confidence in the quality of our products.Festool naturally offers the statutory guarantee against material and manufacturing defects for all electrical and pneumatic tools. This guarantee is automatically extended to a total of 3 years if you return the 1+2 guarantee card enclosed with every new tool to Festool.You will find the precise conditions for the 1+2 guarantee as well as the usage and maintenance instructions in the operating manual or the documents included with each product.

www.festool.com TTS Tooltechnic Systems AG & Co. KG Wertstraße 20 D-73240 Wendlingen represented by: Festool GmbH Export Department Wertstraße 20 D-73240 Wendlingen Phone (+49) 70 24/804-640 Fax (+49) 70 24/804-724 E-mail: [email protected]

Type no. 058 047 EN-IMP

Dealer

Subject to alterations and errors. All illustrations are non-binding. Created for TTS Tooltechnic Systems AG & Co. KG, DE - 73240 Wendlingen, 10/2005

Three years guarantee – that means three years security.