1647991A CIA Bigelow Components-6

11/16/16

3:09 PM

Page 3

PRECISION COMPONENTS MANUFACTURING FACILITY WITH EXTENSIVE CAPABILITIES IN COLD HEADING AND STAMPING INCLUDING (40) SMALL PARTS COLD HEADERS, OBI PRESSES, COMPLETE TOOL SHOP, PARTS FINISHING AND SUPPORT EQUIPMENT

To

Be co S m ee e a In Qu stru ali ct fie ion d so Bi dd n P er ag on e 2 th eI nt er ne t

Plant Closed

BIGELOW COMPONENTS 74 Diamond Road – Springfield Township, NJ 07081 10 Miles West of Newark, New Jersey

SALE DATE: TUESDAY, DECEMBER 13TH, STARTING AT 9:00 AM INSPECTION: MONDAY, DECEMBER 12TH FROM 10:00 AM TO 4:00 PM

Mori Seiki CL-150M Three-Axis CNC Turning Center

(2 of 4) Nakashimada NP-40, PF-630 and PF-420 Cold Headers

(15) OBI Presses From 20 Ton to 60 Ton

5/32” Nakashimada Model NP-40 High Speed Two-Die Three-Blow Cold Header

(8) Hardinge HLV-H Precision Lathes

Sale Under The Management Of

CINCINNATI INDUSTRIAL AUCTIONEERS auctioneers | appraisers | since 1961 | cia-auction.com | [email protected] 2020 Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760

1647991A CIA Bigelow Components-6

11/16/16

3:09 PM

Page 4

TUESDAY, DECEMBER 13TH

(2) .158” Nakashimada Model PF-420 Two-Die Three-Blow Cold Headers

.237” Nakashimada Model PF-630 Two-Die Three-Blow Cold Header

MULTI-DIE & PROGRESSIVE COLD HEADERS 6 mm Ceva Model NF54 Four-Die Cold Header; 2-6 mm Cut-Off Diameter, 10 - 50 mm Working Length, 100 PPM, Equipped w/ PKO 1-3, Air Clutch

3/16” National Four-Die Progressive Cold Header; S/N 23678, 3/16” Cut-Off

(2) .158” Nakashimada Model PF-420 Two-Die Three-Blow Cold Headers

Diameter, 1-1/2” Die Kickout, 2-1/4” CutOff Length, 110 PPM, Equipped w/ Bushing Cut-Off, PKO 1-3, AC Vari-Drive, Straight Across Transfer SEE PHOTO

3/16” National Four-Die Progressive Cold Header; S/N 27062, 3/16” Cut-Off Diameter, 1-1/2” Die Kickout, 2-1/4” CutOff Length, 110 PPM, Equipped w/ Bushing Cut-Off, Straight Across Transfer (Updated), Individual Finger Opening Cam on Transfer, PKO 1-4, Ace Monitor, Variable Speed Vari-Drive, Hydraulic Clamping on Kickout Adjustments, Quick Adjust on Kickout, Air Clutch, Spare Transfer & Set-Up Fixture (Machine was Completely Rebuilt & Upgraded Approx. 1995) SEE PHOTO

3.5 mm Matsumoto Model YMP-430 Four-Die Micro Parts Former; 3.5 .157” Asahi Okuma Model AOT-4B Two-Die TwoBlow High Speed Cold Header

mm Cut-Off Diameter, 25 mm Kickout Stroke, 10 mm PKO Stroke, 120 – 200 PPM, Equipped w/ Bushing Cut-Off, PKO, Individual Finger Opening Transfer Cam, Straight Across & Turn Around Transfer, Stripper, Ace Monitor SEE PHOTO

5/32” Nakashimada Model NP-40 High Speed Two-Die Three-Blow Cold Header

.237” Nakashimada Model PF-630 Two-Die Three-Blow Cold Header;

TUBULAR RIVET HEADERS

S/N 830313, .237” Max Cut-Off Diameter (100,000 PSI), 1.575” Max Cut-Off Length, 2” 1st Die Kickout, 1.181” 2nd Die Kickout, .787” 2nd Punch PKO Stroke, .394” 3rd Punch PKO Stroke, 50 – 170 PPM, Equipped w/ Fingerless Transfer, PKO (New 1983) SEE PHOTO

54301, .118” Cut-Off Diameter, .630” Shank Length, .945” Cut-Off Length, 150250 PPM, Equipped w/ Bushing Cut-Off, Face of Die Stripper SEE PHOTO

5/32” Nakashimada Model NP-40 High Speed Two-Die Three-Blow Cold Header; S/N 90009, 5/32” Cut-Off

N/A, .156” Cut-Off Diameter, 7/8” Shank Length, 200 PPM, Equipped w/ Face of Die Stripper

Diameter, 1” Max Cut-Off Length, 1-3/8” Max Transferable Length, 2” 1st Die Kickout, 1-3/8” 2nd Die Kickout, 5/8” 1st & 2nd Punch PKO Stroke, 1/4” 3rd Punch PKO Stroke, 60 - 240 PPM, Equipped w/ Bushing Cut-Off, PKO 1, 2 & 3, Fingerless Transfer, Variable Speed Drive, Die Relief, Face of Die Stripper (New 1990) SEE PHOTO

(2) .158” Nakashimada Model PF420 Two-Die Three-Blow Cold Headers; S/N’s 860242 (1986) & 840180 (1984), .158” Cut-Off Diameter (100,000 PSI), 1” Max Cut-Off Length, 2” 1st Die Kickout, .788” 2nd Die Kickout, .590” 2nd Punch PKO Stroke, 80 - 200 PPM, Equipped w/ Fingerless Transfer, PKO SEE PHOTO

.157” Asahi Okuma Model AOT-4B Two-Die Two-Blow High Speed Cold Header; S/N 6-1045, .157” Cut-Off Diameter (100,000 PSI), .984” Kickout Length, .314” – 1.377” Min/Max Cut-Off Length, .236” PKO Stroke, 400 PPM, Equipped w/ Bushing Cut-Off, Punch Kickout (New 1981) SEE PHOTO

.118” Ayase Seiki Model ASOH-TR DSSD Tubular Rivet Header; S/N

.156” Tsukiboshi Mdoel MT-350 DSSD Tubular Rivet Header; S/N

.156” Tsukiboshi Model MT-300 DSSD Tubular Rivet Header; S/N 4903004, .156 Cut-Off Diameter, 1” Shank Length, 140 PPM, Equipped w/ Face of Die Stripper

(4) .094” Tsukiboshi Model MT-200 DSSD Tubular Rivet Headers; S/N’s 4806006, 4806008, 4806004 & N/A, .020” - .094” Min/Max Cut-Off Diameter, .437” Shank Length, 150 PPM, Equipped w/ Face of Die Stripper SEE PHOTO

COLD HEADERS – DOUBLE STROKE SOLID DIE 5/16” Waterbury Farrel 5/16 Hipro DSSD Cold Header; S/N 29026, 5/16” Cut-Off Diameter, 1-1/2” Shank Length, 2-5/8” Cut-Off Length, 175 PPM, Machine Rebuilt, Excellent Condition SEE PHOTO

1/4” Waterbury Farrel Model #2 DSSD Toggle Cold Header; S/N 221108, 1/4” Cut-Off Diameter, 1-3/4” Shank Length, 2-3/8” Cut-Off Length, 100 PPM

WEBCAST BIDDER INSTRUCTIONS

5/16” Waterbury Farrel 5/16 Hipro DSSD Cold Header

Approx. (20) RMG Turntables w/ Various Diameters

➢ All Internet bidders must register for this auction at www.bidspotter.com at least 48-Hours Prior to the Sale Date, if you do not you will not be approved. ➢ All Internet bidders must Post a Deposit of Approx. 25% of Your Planned Spending Budget or $5,000.00 Minimum with Cincinnati Industrial Auctioneers in Order to be approved to Bid. Those who do Not Post the Deposit Will Not be Approved. Period.

1/8” Hunter McKenzie Bull Block

(2) .190” Hartford Model 190 Horizontal Hand Feed Thread Rollers

(6) 3/16” Waterbury Farrel Hipro DSSD Cold Headers

(4) .094” Tsukiboshi Model MT-200 DSSD Tubular Rivet Headers

1647991A CIA Bigelow Components-6

11/16/16

3:09 PM

Page 5

BIGELOW COMPONENTS Rebuilt & Upgraded

3/16” National Four-Die Progressive Cold Header

3/16” National Four-Die Progressive Cold Header

(6) 3/16” Waterbury Farrel 3/16 Hipro DSSD Cold Headers; S/N’s

.106” Ayase Seiki Model AS-OH DSSD Cold Header; S/N 56205, .023”

220792, 222923 and223457 WERE CONVERTED FROM #10 TUBULAR RIVET HEADERS TO PRODUCE SOLID PARTS, S/N’s 224625, 71572 & 2246251009I ARE STANDARD SOLID , 3/16” Cut-Off Diameter, 1” Shank Length, 11/2” Cut-Off Length, 225 PPM SEE PHOTO

- .106” Min/Max Cut-Off Diameter, .945” Cut-Off Length, .630” Shank Length, 170 – 270 PPM, Equipped w/ PKO, Wiper

(6) 3/16” Waterbury Farrel Model #1 DSSD Toggle Cold Headers; S/N’s 225076 and 86239 WERE CONVERTED FROM 2 DIE 4 BLOW, S/N’s 143326, 224210, 86905 & 12382 STANDARD, 3/16” Cut-Off Diameter, 1-1/4” Shank Length, 1-3/4” Cut-Off Length, 125 PPM SEE PHOTO

(3) .169” Tsukiboshi Model MS400 DSSD Cold Headers; .169” CutOff Diameter, 1” Shank Length, 240 PPM

.125” Morris Omega Model “0” DSSD Cold Header; S/N 672, .060” .125” Cut-Off Diameter, .750” Shank Length, 80 – 200 PPM

(3) 1/8” National Model 25HS High Speed DSSD Cold Headers; S/N’s

(2) .070” Morris Omega Model “00” DSSD Cold Headers; S/N’s 881 & 882, .020” - .070” Min/Max Cut-Off Diameter, .400” Shank Length, 80 – 180 PPM, Cabinet Base SEE PHOTO

THREAD ROLLERS (2) .190” Hartford Model 190 Horizontal Hand Feed Thread Rollers; S/N’s 236-44 & 316-51A, .060” - .190” Thread Capacity, 1-1/2” Thread Length, 30 - 150 PPM, Equipped w/ Vibratory Bowl, Adjustable Pitman SEE PHOTO

WIRE DRAWER 1/8” Hunter McKenzie Bull Block; S/N 5224, 1/8” Nominal Wire Diameter, 16” Diameter Capstan, DC Vari-Drive, 100 - 1,670 RPM, Power Take Up SEE PHOTO

MISC. WIRE EQUIPMENT

41070 (1969), 41140 (1973) & 41088 (1971), 1/8” Cut-Off Diameter, 1” Shank Length, 1-1/2” Cut-Off Length, 450 PPM, Equipped w/ Bushing Cut-Off, & S/N 41088 has Partial PKO Mechanism SEE PHOTO

24” VFL Roll Bench Top Roll Sorter w/ Vibratory Bowl Feed Approx. (20) RMG Turntables w/ Various Diameters SEE PHOTO New Holland Model K24 Spin Dryer; S/N 965182, 12” Basket, Heater

(17) 1/8” Waterbury Farrel Model “0” DSSD Toggle Cold Headers;

OBI PRESSES

S/N’s 136880, 180252, 223505, 2227431020C, 222743-1019C, 220667, 224628, 22/626, 123973, 224628-224782-1165G, 223387, 83948, 222907, 224628224782-1164G, 223387 & 220667, 1/8” Cut-Off Diameter, 1” Shank Length, 11/2” Cut-Off Length, 150 PPM

s/n H50854/HP37823, 2 1/2” , 3 1/2”, 12 3/4”, Adjustable Stroke, Roll Feed, Air Clutch, PB (1964) SEE PHOTO 60 Ton Bliss No. 21S OBI Press; s/n n/a, ACE 100 Control Panel, PB Control, Air Clutch

60 Ton Bliss No. 21-1/2B OBI Press;

15% ONSITE BUYERS PREMIUM

3.5 mm Matsumoto Model YMP-430 Four-Die Micro Parts Former

40 Ton Minster No. 4 OBI Press; s/n 4-14717, 2.25” Adj., 1.75” Stroke, 225 SPM, 10” S.H., PA Roll Feed SEE PHOTO 45 Ton L&J No. 45 OBI Press; s/n 45783A, 2” Stroke, 3” Adj., 11-3/8” S.H., 28” x 18” Bed, Roll Feed, Air Clutch SEE PHOTO 45 Ton Federal No. 45 OBI Press; s/n 45-240, 2” Stroke, 11-1/2” S.H., 18” x 28” Bed, 2-1/2” Adj., 80-240 SPM, V/S, Air Clutch

32 Ton Federal No. 32 OBI Press; s/n 32-209, 1.5” Stroke, 90-270 SPM, 15” x 24” Bed, 2” Adj., Air Clutch SEE PHOTO

(3) 1/8” National Model 25HS High Speed DSSD Cold Headers

(2) 32 Ton Federal No. F3 OBI Presses; s/n 3-2339 and 2352, 1.5” Stroke, 9.25” S.H., 12 x 21” Bed, (1) w/ Roll Feed, Palm and PB Control

22 Ton Federal No. 22 OBI Press w/ Roll Feed; s/n 22-155, 1” Stroke, 9.25” S.H., 12” x 20” Bed, 100 to 310 SPM, PA Roll Feed

20 Ton (Approx.) Benchmaster Model 252 OBI Press w/ Indexing Table 20 Ton Comamet Model T20 OBI Press; s/n 3918A, 200 SPM, 2-3/4” Stroke, 13” x 20” Bed, Palm Button, Air Clutch 20 Ton Federal F2 OBI Press; s/n 2255, 2” Stroke, 8.25” SH, 10” x 17” Bed, V/S Drive

(6) 3/16” Waterbury Farrel Hipro DSSD Cold Headers

(5) 20 Ton (Approx.) Benchmaster Model 252 OBI Presses w/ Bowl Feeds and Pick and Place Loaders

18% ONLINE BUYERS PREMIUM (6) 3/16” Waterbury Farrel 3/16 Hipro DSSD Cold Headers

(2) .070” Morris Omega Model “00” DSSD Cold Headers

.118” Ayase Seiki Model ASOH-TR DSSD Tubular Rivet Header

(17) 1/8” Waterbury Farrel Model “0” DSSD Toggle Cold Headers

(6) 3/16” Waterbury Farrel Model #1 DSSD Toggle Cold Headers

1647991A CIA Bigelow Components-6

11/16/16

3:09 PM

Page 6

www.cia-auction.com

45 Ton L&J No. 45 OBI Press

32 Ton Federal No. 32 OBI Press

(3) 4” and 6" Rapid Air Model 104CJ and 106CJ Servo Feeds 60 Ton Bliss No. 21-1/2B OBI Press

FEED EQUIPMENT (3) 4” and 6” Rapid Air Model 104CJ and 106CJ Servo Feeds SEE PHOTO

(3) 4” - 6” Wide US Tool Motorized Roll Straighteners SEE PHOTO

(10) PA Industries Motorized and Manual Uncoilers from 100 Lb. to 500 Lb. SEE PHOTO 6” Jayco 7-Roll Straightener 1,600 Lb. Coiltech Model 2063 Power Uncoiler Miscellaneous Press Feeds, Vibratory Bowls and Air Feeds

PARTS FINISHING AND WASTE WATER Waste Water System w/ 12-Plate Filter Press and 500 Gallon Poly Tanks SEE PHOTO

40 Ton Minster No. 4 OBI Press

Jenfab Lean Clean 360 Basket Aqueous Parts Washer; s/n 1123,

40 HP Kaeser Model BS-51 Rotary Screw Air Compressor; s/n NA,

PLC, 16” x 8” x 4” Approx. Basket Size (New 2004) SEE PHOTO

2,300 Run Hours Showing, 20,000 On Hours Showing SEE PHOTO

3-Station Barrel Tumbler w/ 18” x 10” Tubs 30” Dia. X 12” Deep Vibratory Bowl 36” Dia. X 12” Deep Wheelabrator Model B30 Vibratory Bowl; s/n

10 HP Joy Twistair Horizontal Tank Air Compressor (2) Kaeser KRD-400 Air Dryers

HD9481

(2) 16” x 16” x 16” Vibratory Tubs 3-Station Barrel Tumbling Bench Dip Type Washing Tank w/ Hoist (3) New Holland Centrifugal Parts Dryers

AIR COMPRESSORS 75 HP Kaeser Model CS-90 Rotary Screw Air Compressor

SHOP AND SUPPORT EQUIPMENT 5,000 Lb. (Approx.) Digital Platform Scale w/ 4’ x 4’ Platform Tennant Model 1120 Walk Behind Scrubber Shop and Support Equipment Consisting of; Machine and Building

(5) 20 Ton (Approx.) Benchmaster Model 252 OBI Presses w/ Bowl Feeds and Pick and Place Loaders

Maintenance Parts, Hand Tools, Shop Fans, (20) Sect. Adj. Pallet Rack, Pallet Trucks, Crank Type Die Carts, Electric Hoists, Benches, Shelving, Shipping Equipment, 300 Lb. A-Frame and Related

NEW 2004 (3) 4" - 6" Wide US Tool Motorized Roll Straighteners

Waste Water System w/ 12-Plate Filter Press and 500 Gallon Poly Tanks

Jenfab Lean Clean 360 Basket Aqueous Parts Washer

(10) PA Industries Motorized and Manual Uncoilers from 100 Lb. to 500 Lb.

1647991A CIA Bigelow Components-6

11/16/16

3:09 PM

Page 1

TUESDAY, DECEMBER 13TH

Mori Seiki CL-150M Three-Axis CNC Turning Center

2005 Harley Davidson Electra Glide Screaming Eagle

(8) Hardinge HLV-H Precision Lathes

1-1/2 HP Bridgeport 8-Speed Vertical Mill; s/n 151822 1 HP Bridgeport 8-Speed Vertical Mill

20” Grob Model 4V-18 Vertical Band Saw w/ Blade Welder 5,000 Lb. (Approx.) Digital 20” Wilton Model 3Z713 Floor Platform Scale w/ 4’ x 4’ Platform Drill Tennant Model 1120 Walk Behind 24” Cyclone Poly Bench Top Blast SINKER EDM’S Scrubber Cabinet (2) Charmilles Model D10 Bench Shop and Support Equipment Top Die Sinker EDM Machines; s/n (8) Various D.E. Grinders, Sanders Consisting of; Machine and Building 31789, 29384, System 3R Rotary Head, and Related Maintenance Parts, Hand Tools, Shop P25 Power Supplies SEE PHOTO 8” X 12” Kalamazoo Horizontal Fans, (20) Sect. Adj. Pallet Rack, Pallet System 3R Tooling and Accessories Band Saw Trucks, Crank Type Die Carts, Electric 36” Pexto Kick Shear Hoists, Benches, Shelving, Shipping GRINDERS 4’ Tennsmith Hand Brake Equipment, 300 Lb. A-Frame and (8) 6” x 12” Harig Hand Feed Related Machine Accessories and Tooling Surface Grinders 6” x 18” Boyar Schultz Hand Feed Including; Vises, Demag Units, Crank CNC TURNING CENTER Type Die Carts, Magnetic Chucks, Surface Grinder Mori Seiki CL-150M Three-Axis Collets, Hold Downs, Perishable Tooling CNC Turning Center; s/n 401, 6” x 12” Harig Hand Feed Surface and Related (3/1999), MSC-803 Control, Collet Grinder with Digital Readout Chuck, 6” Chuck, Live Tooling 10” x 20” Jones and Lamson O.D. OPTICAL COMPARATORS SEE PHOTO Grinder AND INSPECTION 6” x 18” Boyar Schultz Hydraulic (4) 14” Gage Master Model 29/GM4 CENTERLESS GRINDER Optical Comparators; s/n 143519486, Surface Grinder Royal Master Model TG12X4 Digital Readout SEE PHOTO Centerless Grinder; s/n 2680, Cosa Single Lip Tool Grinder Inspection Tools Consisting of; (15) Rebuilt, Hydraulic Dressers Torit Dust Collector Various Shop Floor Type Microscopes by SEE PHOTO Grinding Accessories Like Harig Olympus, Amscope and Others, (10) Pin Grind-All Fixtures, Collet Gage Sets Including (1) 4-Drawer, (10) HARDINGE LATHES Indexers, Wheel Dressers, 18” x 24” Bench Top Granite Plates, (8) Hardinge HLV-H Precision Precision V-Blocks and Related Wilson 1JS and 3JR Hardness Testers, Lathes; s/n 4464, 4877, 10769, 184,

SHOP AND SUPPORT EQUIPMENT

8045, 469, 4115, 1175, Some w/ Taper, Tooling SEE PHOTO MISC. TOOLROOM

ENGINE LATHE 15” x 50” Clausing Geared Head Engine Lathe; s/n TG00056, 2,000

MACHINERY

Sentry Model AY Size 2 Electric Furnace; S/N A85895, 14.5 KW, 2,500

Degree, Digital Controls RPM, Chucks, Tooling (1997) 50 Ton Dake Model 50H Hydraulic SEE PHOTO Press; s/n 197105 SEE PHOTO

MILLING MACHINES

Sunnen MBB-1660 Precision Hone;

2 HP Bridgeport Series I Vertical Mill; s/n 204157, Digital Readout, 48”

s/n 92823 w/ Tooling

Table

SEE PHOTO

Rocklinizer Model 600 Metalizing Gun

(11) Hand Feed Surface Grinders

15" x 50" Clausing Geared Head Engine Lathe

Indicators, Calipers, Gauge Blocks and Related

HARLEY DAVIDSON MOTORCYCLE 2005 Harley Davidson Electra Glide Screaming Eagle; 103 Inch Screaming Eagle Engine, 5 Speed Trans, Fuel Injected, 8300 Miles, Oil Cooler, Am/Fm Radio/Cd Player/Weather, Alarm, Electronic Cruise Control, Intercom, Tour Pak W/ Quick Disconnect SEE PHOTO (2) Charmilles Model D10 Bench Top Die Sinker EDM Machines

40 HP Kaeser Model BS-51 Rotary Screw Air Compressor

50 Ton Dake Model 50H Hydraulic Press

(4) 14" Gage Master Model 29/GM4 Optical Comparators

Sunnen MBB-1660 Precision Hone

Royal Master Model TG12X4 Centerless Grinder

1647991A CIA Bigelow Components-6

11/16/16

3:09 PM

Page 2

Nakashimada Nakashimada Headers Headers

National National Headers Headers

Complete Complete Toolroom Toolroom

(15) (15) OBI OBI Presses Presses

PRECISION COMPONENTS MANUFACTURING FACILITY WITH EXTENSIVE CAPABILITIES IN COLD HEADING AND STAMPING INCLUDING (40) SMALL PARTS COLD HEADERS, OBI PRESSES, COMPLETE TOOL SHOP, PARTS FINISHING AND SUPPORT EQUIPMENT

Plant Closed

BIGELOW COMPONENTS 74 Diamond Rd. Springfield Township, NJ 07081

FIRST CLASS MAIL!

10 Miles West of Newark, New Jersey

PRE-SORT FIRST CLASS U.S. POSTAGE

SALE DATE:

CINCINNATI, OHIO PERMIT NO. 3593

PAID

TUESDAY, DECEMBER 13TH STARTING AT 9:00AM INSPECTION:

Monday, December 12th 10:00 AM to 4:00 PM

CINCINNATI

Contact Information

2020 Dunlap St. Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760 auctioneers | appraisers | since 1961 www.cia-auction.com

INDUSTRIAL

AUCTIONEERS

☞

Important Mail TO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL

TUESDAY, DECEMBER DECEMBER 13TH 13TH TUESDAY,

Plant Closed

BIGELOW COMPONENTS

DIRECTIONS

10 Miles West of Newark, New Jersey

From the Garden State Parkway just south of the junction of I-78. Exit at No. 140B US-22W toward Elizabeth Somerville. Proceed Approx. 3-1/2 Miles West on US-22 and make a U-Turn to head back east on US-22 to an immediate right on to Fadem Rd.. to immediate right onto Diamond Rd. and sale site on left.

IMPORTANT NOTICE:

AUCTIONEERS

74 Diamond Rd. Springfield Township, NJ 07081

Although information has been obtained from sources deemed reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the sale. This brochure is intended to provide general information of the equipment being offered and is subject to errors, omissions, additions or deletions. Please check with the Auctioneer’s Office for a final listing. Items offered may or may not necessarily be sold as described and/or photographed in this brochure.

MAIL BIDS ACCEPTED WITH A 25% DEPOSIT

Jeffrey L. Luggen Joseph M. Luggen John F. Rome

TERMS OF SALE All equipment described herein will be sold “as is”, “where is” to the highest bidder or bidders for cash in accordance with our regular terms and conditions of sale. Unless other satisfactory arrangements are made, a 25% deposit in cash, certified or cashier’s check payable to Cincinnati Industrial Auctioneers, Inc., is required on all purchases. Firm and personal checks accepted only if accompanied by a letter from your bank guaranteeing your funds. All sales are subject to state and/or local taxes unless a signed exemption form is presented at the time of purchase. All balances are due at the conclusion of the sale. No merchandise may be removed while the sale is in progress. All bidders must comply with our Standard Terms of Sale, copies of which will be available at the sale site or can be obtained from our website.

15% ONSITE BUYER’S PREMIUM 18% ONLINE BUYER’S PREMIUM

Sale Under The Management Of

CINCINNATI INDUSTRIAL AUCTIONEERS auctioneers | appraisers | since 1961 | cia-auction.com | [email protected] 2020 Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760