IR FIRE DETECTION SYSTEM

MODELS: U1F and U2F-UV/IR with UVC120 and IRC90H UV/IR FIRE DETECTION SYSTEM One and Two-Channel Field-Mount Controller with the UVC120 and IRC90H De...
Author: Lynette Newman
50 downloads 5 Views 4MB Size
MODELS: U1F and U2F-UV/IR with UVC120 and IRC90H

UV/IR FIRE DETECTION SYSTEM One and Two-Channel Field-Mount Controller with the UVC120 and IRC90H Detectors

Part Number: MAN-0035-00 Rev. 3

Copyright © 2002 Net Safety Monitoring Inc. Printed in Canada This m anual is provided for inform ational purposes only. Although the inform ation contained in this m anual is believed to be accurate, it could include technical inaccuracies or typographical errors. Changes are, therefore, periodically m ade to the inform ation within this docum ent and incorporated without notice into subsequent revisions of the m anual. Net Safety Monitoring Inc. assum es no responsibility for any errors that m ay be contained within this m anual. This m anual is a guide for the use of a One and Two-Channel Field-Mount Controller and the data and procedures contained within this docum ent have been verified and are believed to be adequate for the intended use of the controller. If the controller or procedures are used for purposes other than as described in the m anual without receiving prior confirm ation of validity or suitability, Net Safety Monitoring Inc. does not guarantee the results and assum es no obligation or liability. No part of this m anual m ay be copied, dissem inated or distributed without the express written consent of Net Safety Monitoring Inc. Net Safety Monitoring Inc. products, are carefully designed and m anufactured from high quality com ponents and can be expected to provide m any years of trouble free service. Each product is thoroughly tested, inspected and calibrated prior to shipm ent. Failures can occur which are beyond the control of the m anufacturer. Failures can be m inim ized by adhering to the operating and m aintenance instructions herein. W here the absolute greatest of reliability is required, redundancy should be designed into the system . Net Safety Monitoring Inc., warrants its sensors and detectors against defective parts and workm anship for a period of 24 m onths from date of purchase and other electronic assem blies for 36 m onths from date of purchase. No other warranties or liability, expressed or im plied, will be honoured by Net Safety Monitoring Inc Contact Net Safety Monitoring Inc. or an authorized distributor for details.

Table of Contents Unit I GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CONTROLLER SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 1 - Controller Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UV-IR DETECTOR SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 2 - UV/IR Mounting Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . BASIC OPERATION - CONTROLLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CONTROLLER FACEPLATE DESCRIPTION . . . . . . . . . . . . . . . . . . . . . Figure 3 - Controller Face-Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OUTPUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 4 - Jumper Selection for Isolated or Non-Isolated Current Outputs PROGRAMMING OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 1 - Selectable Output Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . EXTERNAL RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AUTOMATIC DIAGNOSTICS AND FAULT IDENTIFICATION . . . . . . . . VOTING LOGIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

1 1 1 2 3 3 4 4 5 5 6 6 7 7 7 7

Unit II UV/IR FIRE DETECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 SYSTEM APPLICATION . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 5 - Hydrocarbon Fire Radiation . . . . . . . . . Figure 6 - Solar Radiation Spectrum . . . . . . . . . . . Figure 7 - UV Detector Cone of Vision . . . . . . . . . Figure 8 - IR Detector Cone of Vision ........ OPTICAL SENSITIVITY RANGE (Cone of Vision) SYSTEM SENSITIVITY CONSIDERATIONS . . . . . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . .

8 8 9 9 9 10 10

Unit III SYSTEM INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GENERAL W IRING REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . CONTROLLER W IRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 9 - UV/IR Termination Box Configuration . . . . . . . . . . . . . . . . . Figure 10a - W iring for U1F-UV/IR with Non-Isolated Current Output Figure 10b - W iring for U1F/IR with Isolated Current Output . . . . . . . Figure 11a - W iring for U2F-UV/IR with Non-Isolated Current Output Figure 11b - W iring for U2F-UV/IR with Isolated Current Output . . . . MOUNTING THE DETECTORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DIP SW ITCH SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CHANNEL SELECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 12b - Dip Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Figure 12a - Dip Switch Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CONTROLLER SENSITIVITY ADJUSTMENT FOR IR . . . . . . . . . . . CONTROLLER SENSITIVITY ADJUSTMENT FOR UV . . . . . . . . . . . Figure 12c - Relay Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . .

10 10 11 11 13 14 15 16 17 17 17 18 18 18 18 20

Unit IV SYSTEM OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 STARTUP PROCEDURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CHECKOUT PROCEDURE . . . . . . . . . . . . . . . . . . . . . . . . . . . MANUAL vi CHECK/COUNT TEST . . . . . . . . . . . . . . . . . . . . . MANUAL CHECK PROCEDURE . . . . . . . . . . . . . . . . . . . . . . . ALTERNATE TEST PROCEDURE . . . . . . . . . . . . . . . . . . . . . NORMAL OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FIRE RESPONSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . Current Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 2 - Current Outputs . . . . . . . . . . . . . . . . . . . . . . AUTOMATIC DIAGNOSTICS AND FAULT IDENTIFICATION

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

21 21 21 22 22 23 23 23 23 24

SPECIAL FUNCTION MENU . . . . . . . . FORCED CURRENT OUTPUT MODE Table 3 - Error Codes . . . . . . . CURRENT CALIBRATION MODE . . . . ADDRESS SET MODE (do not use) . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

. . . . .

24 24 25 25 26

Unit V MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 ROUTINE MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 DEVICE REPAIR AND RETURN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Appendix A Net Safety Monitoring Inc. Electrostatic Sensitive Device Handling Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Appendix B Procedure For Activating Reed Switches . . . . . . . . . . . . . . . . . . . . . . ii Appendix C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Appendix D Common Ultra-Violet Absorbing Gases . . . . . . . . . . . . . . . . . . . . . . . . iv Appendix E Wire Resistance In Ohms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

Unit I GENERAL INFORMATION DESCRIPTION The U1F-, U2F-UV/IR model controllers with UVC120 ultraviolet (UV) detector and IRC90H infrared (IR) detector provides fast reliable fire detection in environments where false actuation due to interference can be a problem. Such interference includes x-rays, gamma rays, electric arcs, and hot objects. These interfering agents can make either an infrared or an ultraviolet detection system alone unusable. By combining the two types of fire detection systems, reliable fire detection is possible in these environments without unacceptable false alarms. In order for an alarm condition to be actuated, both the UV and IR detectors must ‘see’ the fire. The UV and IR detectors monitor different portions of the radiation spectrum and fire is virtually the only source that will affect both types of detectors. This system makes it possible for arc welding and other projects to be performed on the premises without the need to shut down your fire detection system and leave your facility unmonitored. The controller comes with a full array of faceplate indicators, relay and current outputs, automatic and manual Visual Integrity (vi) testing.

FEATURES < < < < < < < < < < < < < <