Fire and Gas Detection Systems
Price List 2016
Table of Contents Price List
5
1. Intelligent Systems 7 2. Conventional Systems 15 3. Extinguishing Systems 23 4. Special Equipment 25 5. Gas Detection Systems 33 6. Accessories 37
7. General Sales Conditions
41
8. Practical Information
47
1. Price List policies and sales procedures 49 2. Order policy 50 3. Warranty 53 4. Returning material policy 53 5. Rental of specialized test tools 57 6. Services 57 7. Environmental taxes 57 8. Contact details 58
3
Notes
4
Honeywell | Fire Safety
Benelux region
Price list version 2016_V1.2
Price List 2016 (v1.2)
Price List Reference
Description
Packing Lead unit time
Price
1. Intelligent Systems 020-600-002
Bezel Kit for repeater panels.
206,50 €
1
4W
020-891
USB Interface lead cable
201,50 €
1
1W
020-909
Kit Compact Mimic 160 zone Main PCB
536,75 €
1
1W
020-910
Kit Compact Mimic Expansion PCB
201,50 €
1
1W
709-601-001
Acitve repeater panel
996,00 €
1
1W
709-701-001
Passive repeater panel
877,50 €
1
1W
714-001-113
DXc1E One Loop Fire alarm Control Panel
1.130,00 €
1
1W
714-001-213
DXc1E-M One Loop Fire alarm Control Panel (availability will be announced)
T.B.A.
1
714-001-223
DXc2E Two Loop Fire alarm Control Panel
1.417,50 €
1
1W
714-001-243
DXc4E Four Loop Fire alarm Control Panel
1.990,00 €
1
1W
720-001-301
ZX2Se 1 or 2 Loop Analogue Panel (Replaced by 720-001-302)
OBSOLETE
1
720-001-302
ZX2Se 1 or 2 Loop Analogue Panel (incl. French)
2.065,00 €
1
721-001-301
ZX5Se 1 to 5 Loop Analogue Panel (Replaced by 721-001-301)
OBSOLETE
1
721-001-302
ZX5Se 1 to 5 Loop Analogue Panel (incl. French)
2.912,50 €
1
722-001-301
ZX1Se Single Loop Analogue Panel (Replaced by 722-001-302)
OBSOLETE
1
722-001-302
ZX1Se Single Loop Analogue Panel (incl. French)
1.500,00 €
1
3W
795-004-001
RS-485 Communication Module
388,00 €
1
1W
795-005
RS-232 Communication Module
388,00 €
1
1W
795-014
4 way, programmable RELAY module, pcb.
610,00 €
1
4W
795-015
4 way, programmable SOUNDER module, pcb.
671,00 €
1
4W
795-029
8 way, programmable INPUT module, pcb.
810,25 €
1
4W
795-038-001
HI-485 communication module
820,75 €
1
1W
795-057
Modbus interface module
1.757,50 €
1
4W
795-060-002
External Printer For ZXSE panels
1.287,50 €
1
1W
795-063
PSU/Charger in Box, 24VDC/5 Amp.
1.642,50 €
1
4W
795-064
PSU/Charger without enclosure, 24VDC/5 Amp.
1.165,00 €
1
4W
795-065
40 way, programmable MIMIC interface, pcb.
1.157,50 €
1
1W
795-072
Loop driver card Morley protocol - 250mA
305,50 €
1
1W
795-072-100
Loop driver card Morley protocol 460mA
371,50 €
1
1W
795-077-020
20-zones indication expansion module; only for ZX5Se
338,25 €
1
4W
795-077-060
60-zones indication expansion module; only for ZX5Se
659,75 €
1
1W
795-081-001
Level 1 software key for FIRE - 6
OBSOLETE
1
795-082
Engineers SPK (software programming kit)
OBSOLETE
1
795-099
Kit DXc network card
655,50 €
1
1W
795-101
Kit DXc Cover blank
144,75 €
1
4W
795-102
Kit DXc 40 zone Led card
201,50 €
1
1W
795-111
Kit DXc Loop expansion card
604,00 €
1
1W
795-112
Kit DXc bezel 1 loop
201,50 €
1
4W
795-113
Kit DXc bezel 2-4 loop
242,75 €
1
4W
795-114
Kit DXc bezel 1 loop + extension
222,00 €
1
4W
795-115
Kit DXc bezel 2-4 loop + extension
242,75 €
1
4W
795-116
Kit DXc cover custom keyplate
201,50 €
1
4W
795-118
Kit DXc Keyswitch
165,25 €
1
4W
795-119
Kit DXc Rack mount 1 loop
201,50 €
1
4W
795-120
Kit DXc Rack mount 2 loop
242,75 €
1
4W
1
2
3W
3
3W
4
5
6
7
8
7
Price List
8
Packing Lead unit time
Reference
Description
Price
795-121
Kit DXc Extension Backbox
165,25 €
1
4W
795-122
Kit DXc RS232
325,25 €
1
1W
795-124
Kit DXc 80 zone Led card
201,50 €
1
4W
795-130
DXC Loop splitter enclosure (availability will be announced)
T.B.A.
1
795-131
Loop splitter card (availability will be announced)
T.B.A.
1
795-132
System I/O card (availability will be announced)
T.B.A.
1
797-061
ZX1Se/ZX2Se Bezel kit.
155,25 €
1
4W
797-062
ZX5Se Bezel kit.
266,25 €
1
4W
797-063
ZX1Se/ZX2Se Glass door kit
377,75 €
1
4W
797-064
ZX5Se Glass door kit
633,75 €
1
4W
797-076
”L” shaped mounting bracket to fit peripheral pub’s into ZXSe serie
166,25 €
1
4W
797-077
ZX1/2Se Battery box or mounting enclosure
443,75 €
1
1W
797-078
ZX5Se Battery box or mounting enclosure
538,25 €
1
1W
797-090
DXc extension PSU backbox (availability will be announced)
T.B.A.
1
B501AP
Standard mounting base
8,20 €
1
1W
B501AP-BK
Standard mounting base
12,45 €
1
1W
B501AP-IV
Standard mounting base
9,20 €
1
1W
B524HTR
Heated base
75,10 €
1
1W
B524HTR-WH
Heated base
67,00 €
1
1W
B524IEFT-1
Mounting base with fet isolator
17,25 €
1
1W
B524IEFT-1B
Mounting base with fet isolator
30,20 €
1
3W
B524RTE
Mounting base with relay (Available until end of stock)
62,95 €
1
3W
B524RTE-WH
Mounting base with relay (Available until end of stock)
56,15 €
1
3W
BA1AP
AP base conduit adapter white
3,65 €
1
3W
BA1AP-IV
AP base conduit adapter ivory
4,00 €
1
3W
BB-2
Multi-mount steel cabinet
138,25 €
1
1W
BB-6
Multi-mount cabinet
260,25 €
1
1W
BCK-200EAP
Black detector cover for Optical MI200-S2 detector
10,35 €
1
3W
BCK-200REAP
Black detector cover for Thermal MI200-S2 detector
10,35 €
1
3W
BCK-200TEAP
Black detector cover for Optical/Thermal MI200-S2 detector
10,35 €
1
3W
BCK-200TEMAP
Black detector cover for PTIR MI200-S2 detector
10,35 €
1
3W
BDD
Deep profile base - ivory (incl. B501AP)
12,60 €
1
1W
BEAM-HK
Heater kit for 6500R
140,25 €
1
1W
BEAM-HKR
Heater kit for reflector
302,00 €
1
1W
BEAM-LRK
Long-range reflector (70m-100m)
260,25 €
1
1W
BEAM-MMK
Mounting bracket - swivel type
183,25 €
1
1W
BEAM-SMK
Surface mounting box
32,95 €
1
1W
BPW
Deep profile base - pure white (incl. B501AP)
12,60 €
1
1W
BRR
Deep profile base - red (incl. B501AP)
12,60 €
1
1W
CH-6
Mount chassis for BB-6
74,65 €
1
1W
CMX-10RMH
10 way addressable relay control card
659,00 €
1
1W
DNRE
Duct detector housing
202,50 €
1
1W
DST-1
Inlet sampling tube
9,80 €
1
3W
DST-1.5
Inlet sampling tube
11,90 €
1
1W
DST-10
Inlet sampling tube
36,70 €
1
1W
DST-3
Inlet sampling tube
15,20 €
1
1W
Honeywell | Fire Safety
Benelux region
Price list version 2016_V1.2
Price List Reference
Description
Packing Lead unit time
Price
DST-5
Inlet sampling tube
20,50 €
1
1W
HLS-OPTO-RS232
RS232 optical isolation transceiver
89,00 €
1
4W
IBS-LIDDW
Base cover for B501AP-IV, B401 & ABS base sounders (pack of 10)
76,30 €
10
1W
IBS-LIDW
Base cover for B501AP & ABS base sounders (pack of 10)
85,55 €
10
1W
IRK-2E
LED Remote indicator, white
14,55 €
1
1W
IRK-E-SI
LED Remote indicator, ivory
15,10 €
1
1W
IRK-W-1224
Waterproof remote indicator
81,55 €
1
1W
ISO524-1
Micro isolator module
31,25 €
1
1W
ISOX-8
8-way loop splitter board
256,00 €
1
1W
ITS-BOX
RS-232 - TCP/IP device server
494,00 €
1
4W
KL1 X 5
Earth continuity links (pack of 5)
5,40 €
5
4W
M200-DIN
DIN-rail mounting clip
8,35 €
1
1W
M200-PMB
Panel mounting clip
8,35 €
1
1W
M200-SMB
Surface mount box
12,15 €
1
1W
M200-SMB KO
Surface mount box with knockouts
14,30 €
1
1W
MCP-LABEL F 007
Foil with ‘PLAIN RED’ labels
OBSOLETE
48
MCP-LABEL F 010
Foil with ‘BRAND FEU’ labels (black on red)
OBSOLETE
48
MCP-LABEL F 014
Foil with ‘BRAND’ labels (black on red)
OBSOLETE
48
MCP-LABEL F 028
Foil with ‘ALARME INCENDIE’ labels (black on red)
58,25 €
48
4W
MCP-LABEL F 048
Foil with 48 ‘KOEPEL COUPOLE’ labels (white on red)
59,30 €
48
2W
MCP-LABEL F 056
Foil with ‘BRAND FEU’ labels (black on yellow)
58,25 €
48
4W
1
2
3
4
MCP-LABEL F 071
Foil with ‘EMERGENCY STOP’ labels (black on yellow)
58,25 €
48
4W
MCP-LABEL F 078
Foil with EVACUATION’ labels (black on red)
58,25 €
48
4W
MCP-LABEL F 081
Foil with ‘FEU’ labels (black on yellow)
58,25 €
48
4W
MCP-LABEL F 082
Foil with ‘BLUSKNOP’ labels (black on yellow)
58,25 €
48
4W
MCP-LABEL F 103
Foil with ‘GASBLUSSING’ labels (black on yellow)
OBSOLETE
48
MCP-LABEL F 108
Foil with ‘ALARME EVACUATION’ (white on red)
OBSOLETE
48
MCP-LABEL F 120
Foil with ‘BRAND ALARM’ labels (black on red)
OBSOLETE
48
MCP-LABEL F 138
Foil with ‘ALERTE INCENDIE’ labels (black on red)
58,25 €
48
MCP-LABEL F 141
Foil with ‘BRAND’ labels (black on yellow)
OBSOLETE
48
5
6
7
8 4W
MCP-LABEL F 217
Foil with ‘EXTINCTION’ labels (black on yellow)
58,25 €
48
4W
MCP-LABEL F 218
Foil with ‘RUNNING MAN’ labels (white on green)
58,25 €
48
4W
MCP-LABEL F 220
Foil with ‘BIJ NOOD DEUR OPEN’ labels (white on blue)
58,25 €
48
4W
MCP-LABEL F 222
Foil with ‘EN54 BURNING HOUSE’ labels (white on red)
58,25 €
48
4W
MCP-LABEL F 228
Foil with ‘DEUR ONGRENDELING’ labels (white on blue)
58,25 €
48
4W
MCP-LABEL F 235
Foil with ‘ALERTE WAARSCHUWING’ labels (black on red)
58,25 €
48
4W
MCP-LABEL F 244
Foil with ‘UITSTEL BLUSSING’ labels (white on blue)
58,25 €
48
4W
MCX-55MH
5 way intelligent input monitor & 5 way intelligent relay
641,25 €
1
1W
MI-BSO-DD-I
Int. detector base sounder, with isolator, ivory housing
100,25 €
1
1W
MI-BSO-DD-N
Int. detector base sounder, no isolator, ivory housing
94,90 €
1
4W
MI-BSO-PP-I
Int. detector base sounder, with isolator, pure white
93,90 €
1
1W
MI-BSO-PP-N
Int. detector base sounder, no isolator, pure white
88,40 €
1
1W
MI-BSS-PA-I
Int. detector base sounder strobe, with isolator, clear, amber lens, pure white housing
140,25 €
1
1W
MI-BSS-PA-N
Int. detector base sounder strobe, no isolator, clear, amber lens, pure white housing
135,25 €
1
1W
9
Price List
10
Packing Lead unit time
Reference
Description
Price
MI-BSS-PC-I
Int. detector base sounder strobe, with isolator, clear, clear lens, pure white housing
140,25 €
1
4W
MI-BSS-PC-N
Int. detector base sounder strobe, no isolator, clear, clear lens, pure white housing
135,25 €
1
4W
MI-BSS-PR-I
Int. detector base sounder strobe, with isolator, clear, red lens, pure white housing (Available until end of stock)
137,75 €
1
1W
MI-BSS-PR-N
Int. detector base sounder strobe, no isolator, clear, red lens, pure white housing
OBSOLETE
1
MI-BST-PC-I
Int. detector base sounder strobe, no isolator, clear, clear lens, pure white housing (Available until end of stock)
114,50 €
1
4W
MI-CZ-6
6 way zone interface multimodule
462,00 €
1
1W
MI-D240CMO
Single 240VAC/5A relay module
115,00 €
1
1W
MI-D240CMO-DIN
Single 240VAC/5A relay module (DIN rail mount.)
131,75 €
1
1W
MI-D240CMO-KO
Single 240VAC/5A relay module (knock outs)
117,25 €
1
1W
MI-D2ICMO
Double supervised input + single relay output
113,00 €
1
1W
MI-DCMO
Single supervised output module
86,30 €
1
1W
MI-DCZRM
Conventional zone input module
162,75 €
1
1W
MI-DISO
Single isolator module
68,85 €
1
1W
MI-DMM2I
Double supervised input module
95,15 €
1
1W
MI-DMMI
Single supervised input module
75,45 €
1
1W
MI-FHSE-S2
Digital 58°C thermal detector
62,35 €
1
1W
MI-FHSE-S2I
Digital 58°C thermal detector with isolator
68,60 €
1
1W
MI-FHSE-S2I-IV
Digital 58°C thermal detector with isolator, ivory
83,10 €
1
3W
MI-FHSE-S2-IV
Digital 58°C thermal detector, ivory
75,40 €
1
3W
MI-HTSE-S2
Digital 78°C thermal detector
62,35 €
1
1W
MI-HTSE-S2I
Digital 78°C thermal detector with isolator
68,60 €
1
1W
MI-HTSE-S2I-IV
Digital 78°C thermal detector with isolator, ivory
83,10 €
1
3W
MI-HTSE-S2-IV
Digital 78°C thermal detector, ivory
75,40 €
1
3W
MI-LPB2-S2I
Addressable optical smoke beam detector
946,00 €
1
1W
MI-LZR
Intelligent high sensitivity laser detector, ivory
316,50 €
1
3W
MI-MCP-FLEX
Manual call point with flexible - red
79,30 €
1
1W
MI-MCP-FLEX-B
Manual call point with flexible - blue
93,55 €
1
4W
MI-MCP-FLEX-G
Manual call point with flexible - green
93,55 €
1
4W
MI-MCP-FLEX-I
Manual call point with isolator & flexible - red
94,60 €
1
1W
MI-MCP-FLEX-I-B
Manual call point with isolator & flexible - blue
104,75 €
1
4W
MI-MCP-FLEX-I-G
Manual call point with isolator & flexible - green
104,75 €
1
4W
MI-MCP-FLEX-I-W
Manual call point with isolator & flexible - white
104,75 €
1
4W
MI-MCP-FLEX-I-Y
Manual call point with isolator & flexible - yellow
104,75 €
1
4W
MI-MCP-FLEX-W
Manual call point with flexible - white
93,55 €
1
4W
MI-MCP-FLEX-Y
Manual call point with flexible - yellow
93,55 €
1
4W
MI-MCP-GLASS
Manual call point with break glass - red
78,15 €
1
1W
MI-MCP-GLASS-B
Manual call point with break glass - blue
92,50 €
1
4W
MI-MCP-GLASS-G
Manual call point with break glass - green
92,50 €
1
4W
MI-MCP-GLASS-I
Manual call point with isolator & break glass - red
93,55 €
1
1W
MI-MCP-GLASS-I-B
Manual call point with isolator & break glass - blue
103,75 €
1
4W
MI-MCP-GLASS-I-G Manual call point with isolator & break glass - green
103,75 €
1
4W
MI-MCP-GLASS-I-W Manual call point with isolator & break glass - white
103,75 €
1
4W
MI-MCP-GLASS-I-Y
103,75 €
1
4W
Honeywell | Fire Safety
Manual call point with isolator & break glass - yellow
Benelux region
Price list version 2016_V1.2
Price List Reference
Description
Packing Lead unit time
Price
MI-MCP-GLASS-W
Manual call point with break glass - white
92,50 €
1
4W
MI-MCP-GLASS-Y
Manual call point with break glass - yellow
92,50 €
1
4W
MI-MM3E/KAC
Intelligent remote indicator driver (LED output)
67,85 €
1
1W
MI-MM3E-S2
Intelligent mini monitor module
67,85 €
1
1W
MI-PSE-S2
Digital optical detector
68,60 €
1
1W
MI-PSE-S2I
Digital optical detector with isolator
74,90 €
1
1W
MI-PSE-S2I-IV
Digital optical detector with isolator, ivory
91,35 €
1
3W
MI-PSE-S2-IV
Digital optical detector, ivory
83,70 €
1
3W
MI-PTIR-S2
Digital multi (O/T/IR) detector
135,00 €
1
1W
MI-PTIR-S2I
Digital multi (O/T/IR) detector with isolator
141,25 €
1
1W
MI-PTIR-S2I-IV
Digital multi (O/T/IR) detector with isolator, ivory
171,25 €
1
3W
MI-PTIR-S2-IV
Digital multi (O/T/IR) detector, ivory
163,75 €
1
3W
MI-PTSE-S2
Digital multi (O/T) detector
89,20 €
1
1W
MI-PTSE-S2I
Digital multi (O/T) detector with isolator
95,60 €
1
1W
MI-PTSE-S2I-IV
Digital multi (O/T) detector with isolator, ivory
116,00 €
1
3W
MI-PTSE-S2-IV
Digital multi (O/T) detector, ivory
108,50 €
1
3W
MI-RHSE-S2
Digital R.O.R. thermal detector
62,20 €
1
1W
MI-RHSE-S2I
Digital R.O.R. thermal detector with isolator
68,65 €
1
1W
MI-RHSE-S2I-IV
Digital R.O.R. thermal detector with isolator, ivory
83,10 €
1
3W
MI-RHSE-S2-IV
Digital R.O.R. thermal detector, ivory
75,40 €
1
3W
MI-SC-6
6 way supervised sounders outputs
548,25 €
1
1W
MI-WCP-B/I/SF
MCP surface with flexible element & isolator - blue
286,00 €
1
4W
MI-WCP-B/I/SG
MCP surface with break glass element & isolator - blue
273,50 €
1
4W
MI-WCP-B/SF
MCP surface with flexible element - blue
282,50 €
1
4W
MI-WCP-B/SG
MCP surface with break glass element - blue
272,50 €
1
4W
MI-WCP-G/I/SF
MCP surface with flexible element & isolator - green
286,00 €
1
4W
MI-WCP-G/I/SG
MCP surface with break glass element & isolator - green
273,50 €
1
4W
MI-WCP-G/SF
MCP surface with flexible element - green
282,50 €
1
4W
MI-WCP-G/SG
MCP surface with break glass element - green
272,50 €
1
4W
MI-WCP-R/I/SF
MCP surface with flexible element & isolator - red
250,25 €
1
1W
MI-WCP-R/I/SG
MCP surface with break glass element & isolator - red
249,25 €
1
1W
MI-WCP-R/SF
MCP surface with flexible element - red
239,50 €
1
1W
MI-WCP-R/SG
MCP surface with break glass element - red
238,25 €
1
1W
MI-WCP-W/I/SF
MCP surface with flexible element & isolator - white
286,00 €
1
4W
MI-WCP-W/I/SG
MCP surface with break glass element & isolator - white
273,50 €
1
4W
MI-WCP-W/SF
MCP surface with flexible element - white
282,50 €
1
4W
MI-WCP-W/SG
MCP surface with break glass element - white
272,50 €
1
4W
MI-WCP-Y/I/SF
MCP surface with flexible element & isolator - yellow
286,00 €
1
4W
MI-WCP-Y/I/SG
MCP surface with break glass element & isolator - yellow
273,50 €
1
4W
MI-WCP-Y/SF
MCP surface with flexible element - yellow
282,50 €
1
4W
MI-WCP-Y/SG
MCP surface with break glass element - yellow
272,50 €
1
4W
MI-WSO-PP-I
Wall mount sounder, with isolator, pure white
88,80 €
1
1W
MI-WSO-PP-N
Wall mount sounder, no isolator, pure white
83,40 €
1
4W
MI-WSO-PR-I
Wall mount sounder, with isolator, red
88,80 €
1
1W
MI-WSO-PR-N
Wall mount sounder, no isolator, red
83,40 €
1
4W
MI-WSS-PC-I
Wall mount sounder strobe, with isolator, clear, clear lens
144,75 €
1
4W
MI-WSS-PC-N
Wall mount sounder strobe, no isolator, clear, clear lens
138,75 €
1
4W
1
2
3
4
5
6
7
8
11
Price List Reference
Description
Packing Lead unit time
Price
MI-WST-PA-I
Wall mount strobe, with isolator, amber lens
94,40 €
1
MI-WST-PA-N
Wall mount strobe, no isolator, amber lens
OBSOLETE
1
MI-WST-PC-I
Wall mount strobe, with isolator, clear lens
94,40 €
1
4W 4W
MI-WST-PC-N
Wall mount strobe, no isolator, clear lens
MI-WST-PR-I
Wall mount strobe, isolator, red lens
MI-WST-PR-N
Wall mount strobe, no isolator, red lens (Available until end of stock)
MMX-10MH MORL-OPTO-ESPA
4W
88,95 €
1
OBSOLETE
1
87,35 €
1
4W
10 way addressable input monitor card
598,00 €
1
1W
Mini PC fire panel - Espa444 converter
2.682,50 €
1
1W
PS200
Transparent protective hinged cover
4,90 €
1
1W
PTR
Semi Flush Tray, Red
2,95 €
1
4W
RA100Z
Remote Annunciator
29,75 €
1
3W
RMK400AP
Recess mounting kit
10,10 €
1
1W
RMK400AP-IV
Recess mounting kit
10,10 €
1
1W
RTS151
Remote Test Station
103,00 €
1
1W
RTS151KEY
Remote Test Station with key
142,75 €
1
1W
SB1T
Surface mounting box - blue
7,30 €
1
1W
SC071
Terminal blocks (pack of 20)
90,95 €
20
4W
SFT2000
Installation adapter for suspended ceiling (pack of 10)
42,40 €
10
1W
SG1T
Surface mounting box - green
7,35 €
1
1W
SMB6-V0
Multi-mount abs antistatic box
60,90 €
1
1W
SMBW-VO
ABS Antistatic box for xx-6 or IM-10 multimodule
60,90 €
1
1W
SMK400EAP
Surface mounting kit - pure white
7,95 €
1
1W
SMK400EAP-IV
Surface mounting kit - ivory
7,95 €
1
1W
SR1T
Surface mounting box - red
5,35 €
1
1W
SW1T
Surface mounting box - white
7,35 €
1
1W
SY1T
Surface mounting box - yellow
7,35 €
1
1W
WB-1AP
Wet base shroud - pure white
24,35 €
1
1W
WB-1AP-IV
Wet base shroud - ivory
24,35 €
1
1W
WDD
Deep waterproof base - ivory (incl. B501AP)
14,65 €
1
1W
WPW
Deep waterproof base - pure white (incl. B501AP)
20,45 €
1
1W
WRR
Deep waterproof base - red (incl. B501AP)
ZXSe-OPTO-RS485 RS232/485 converter
20,45 €
1
1W
87,75 €
1
4W
199,00 €
1
1W
34,05 €
1
1W
Spare parts for Intelligent Systems
12
002-439
Multi mount enclosure
020-820
Replacement paper roll for printer
020-891
Interface lead(cable) for ZX & DX Morley panels to PC (RS232)
201,50 €
1
1W
124-196
230VAC mains input filter for all ZX models
164,25 €
1
4W
795-045
RS485 to RS232 convertor
884,25 €
1
1W
795-051-001
Internal Printer Module for ZX5Se
788,00 €
1
4W
795-072
Loop driver card Morley protocol for Zxe series panels
305,50 €
1
1W
795-083
Keyswitch kit. Keyswitch and 2 keys for DX control panels
166,75 €
1
1W
795-084
Spare Key for all DX control panels (PACK OF 5)
67,55 €
5
1W
795-085
Internal Printer Module for DX 40 zone Control panels
768,00 €
1
4W
795-104
Kit DXc Spare door
784,50 €
1
4W
795-106
Kit DXc Spare PSU 1 loop
392,50 €
1
4W
Honeywell | Fire Safety
Benelux region
Price list version 2016_V1.2
Price List Packing Lead unit time
Reference
Description
Price
795-107
DXc spare PSU 2-4 loop
567,75 €
1
3W
795-108-003
Kit DXc Spare language pack region 3
108,50 €
1
4W
795-109-003
Kit DXc Spare base card 1 loop region 3
872,25 €
1
4W
1.177,50 €
1
4W
688,50 €
1
1W
795-110-003
Kit DXc Spare base card 2 loop region 3
796-045
Microprocessor board for Zxe series panels Without software (pcb 124-206)
796-150
Single loop motherboard for DX1e (pcb 124-336)
1.165,00 €
1
1W
796-151
2 loop motherboard for DX2e/4e (pcb 124-344)
2.092,50 €
1
1W
796-152
2 loop PLUG IN card for DX4e (pcb 124-351)
1.852,50 €
1
1W
796-153
Display card for all DX panels (pcb 124-335)
572,00 €
1
1W
796-157
2-Loop Base Mainboard for ZX2e (pcb 124-209-002)
934,25 €
1
1W
796-158
Display 2x40 characters. LCD display (pcb 124-327)
594,50 €
1
1W
796-161
Power supply for ZX5e 3-Amp.(pcb 124-205-002)
967,75 €
1
1W
796-162
5-Loop Base Mainboard for ZX5Se (pcb 124-354)
1.142,50 €
1
1W
796-163
1-Loop Base Mainboard for ZX1e (pcb 124-209-003)
883,00 €
1
1W
796-164-000
Set of EPROMS for ZXe series panels. Eproms programmed with the latest software.
132,25 €
1
4W
796-170
Spare ZX2Se Baseboard
937,25 €
1
4W
796-171
Spare ZX1Se Baseboard
926,75 €
1
4W
796-175
Reprofit PSU kit; Panels manufactured before January 2010
1.135,00 €
1
4W
796-176
Retrofit PSU Kit for ZX5Se, Panels manufactured before Jan. 2010
1.535,00 €
1
4W
796-177
Power supply for ZX1e/ZX2e 2-Amp.(pcb 124-207-003); Panels manufactured since January 2010
847,50 €
1
4W
796-178
Power supply for ZX5e 2-Amp.; Panels manufactured since January 2010
1.260,00 €
1
4W
796-180
ZX5Se Retrofit PSU & PCB kit, Panels manufactured before Jan. 2010
1.747,50 €
1
4W
796-181
Retrofit 4 lines display plate assembly complete with display and board; Panels manufactured before January 2010
873,75 €
1
4W
796-182
ZX1Se Retrofit PSU&PCB kit; Panels manufactured before January 2010
1.535,00 €
1
4W
796-183
Retrofit 4 lines display plate assembly complete with display and board; Panels manufactured before January 2010
873,75 €
1
4W
796-184
ZX2Se Retrofit PSU&PCB kit; Panels manufactured before January 2010
1.642,50 €
1
4W
796-850-M200
Set of Eproms with M200 850 software for Zxse
238,25 €
1
3W
796-855-M200
Set of Eproms with M200 850 software for Zxse
238,25 €
1
3W
797-021
Spare Key for all ZX control panels (quantity 1)
14,05 €
1
1W
ESPA4.4.4-CABLE
Programming Cable for ZX-ESPA4.4.4
69,75 €
1
8W
644,25 €
1
8W
OBSOLETE
10
ESPA4.4.4-TEST_PROG
ESPA 4.4.4 Test software
G21534
EN54 break glass for MI call points with Morley-IAS branding (Pack of 10)
KEYLCK-DRK220
Lock and Key for all ZX control panels
23,75 €
1
4W
MUS 156
SPARE EN54 BREAK GLASS FOR ALL KAC CALL POINTS (PACK OF 10)
18,35 €
10
1W
PS230
SPARE EN54 FLEXIBLE OP. ELEMENTS FOR MCP CALL POINTS (PACK OF 10)
27,60 €
10
1W
SC011
SCREWS FOR MCP CALL POINTS (PACK OF 100)
77,40 €
100
4W
SC070
PACK OF 10 SPARE TEST KEYS FOR MCP
13,15 €
10
1W
SC071
PACK OF 20 TERMINAL BLOCKS FOR MCP
90,95 €
20
4W
1
2
3
4
5
6
7
8
13
Price List
14
Reference
Description
WF1-EN54
SPARE EN54 FLEXIBLE OPERATING ELEMENT FOR W CALL POINTS
Honeywell | Fire Safety
Benelux region
Packing Lead unit time
Price
Price list version 2016_V1.2
1,60 €
1
4W
Price List Reference
Description
Packing Lead unit time
Price
2. Conventional Systems 020-713
FS02 A/F Fire and fault relay expansion card
35,70 €
1
1W
020-747 020-772
8-Way relay board
162,00 €
1
1W
4-Way sounder / monitored output board
346,75 €
1
1W
2351E
Conventional Smoke Detector for D2E
40,80 €
1
1W
6500R
100m conv. reflective IR beam detector
820,25 €
1
1W
6500RS
100m conv. reflective IR beam detector with self test tool
967,25 €
1
1W
BEAM-HK
Heater kit for 6500R
140,25 €
1
1W
BEAM-HKR
Heater kit for reflector
302,00 €
1
1W
BEAM-LRK
Long-range reflector (70m-100m)
260,25 €
1
1W
BEAM-MMK
Mounting bracket - swivel type
183,25 €
1
1W
BEAM-SMK
Surface mounting box
32,95 €
1
1W
BZR2
Red bezel for flush installation
4,05 €
1
4W
CSR
Low profile base, RED - Pack of 5
15,50 €
5
4W
CSW
Low profile base, WHITE- Pack of 5
21,95 €
5
4W
CWR
Deep/ IP65 base, RED - Pack of 5
24,25 €
5
4W
CWSO-RR-S1
ENScape Sounder Red, incl. Red low profile base - 32 tones max. 107dB
30,95 €
1
4W
CWSO-RR-W1
ENScape Sounder Red, incl. Red deep base IP65 - 32 tones max. 107dB
35,60 €
1
4W
CWSO-WW-S1
ENScape Sounder White, incl. White low profile base - 32 tones - max. 107dB
32,25 €
1
4W
CWSO-WW-W1
ENScape Sounder White, incl. White deep base IP65 - 32 tones - max. 107dB
36,90 €
1
4W
CWSS-RR-S3
ENScape Sounder/Strobe with Red low profile base and Red LED - EN54-23 Open Class
73,80 €
1
4W
CWSS-RR-S5
ENScape Sounder/Strobe with Red low profile base and Red LED - EN54-23 C, W Class
121,75 €
1
4W
CWSS-RR-W3
ENScape Sounder/Strobe with Red deep base and Red LED IP65 - EN54-23 Open Class
78,50 €
1
4W
CWSS-RR-W5
ENScape Sounder/Strobe with Red deep base and Red LED IP65 - EN54-23 C, W Class
126,50 €
1
4W
CWSS-RW-S5
ENScape Sounder/Strobe with Red low profile base and White LED - EN54-23 C, W Class
121,75 €
1
4W
CWSS-RW-W5
ENScape Sounder/Strobe with Red deep base and White LED IP65 - EN54-23 C, W Class
126,50 €
1
4W
CWSS-WR-S3
ENScape Sounder/Strobe with White low profile base and Red LED - EN54-23 Open Class
73,80 €
1
4W
CWSS-WR-S5
ENScape Sounder/Strobe with White low profile base and Red LED - EN54-23 C, W Class
121,75 €
1
4W
CWSS-WR-W3
ENScape Sounder/Strobe with White deep base and Red LED IP65 - EN54-23 Open Class
78,50 €
1
4W
CWSS-WR-W5
ENScape Sounder/Strobe with White deep base and Red LED IP65 - EN54-23 C, W Class
126,50 €
1
4W
CWSS-WW-S5
ENScape Sounder/Strobe with White low profile base and White LED - EN54-23 C, W Class
121,75 €
1
4W
CWSS-WW-W5
ENScape Sounder/Strobe with White deep base and White LED - IP65 - EN54-23 C, W Class
126,50 €
1
4W
CWST-RR-S5
ENScape Strobe with Red low profile base and Red LED EN54-23, C, W Class
106,00 €
1
4W
1
2
3
4
5
6
7
8
15
Price List
16
Packing Lead unit time
Reference
Description
Price
CWST-RR-W5
ENScape Strobe with White deep base and White LED - IP65 EN54-23, C, W Class
110,50 €
1
4W
CWST-RW-S5
ENScape Strobe with Red low profile base and White LED EN54-23, C, W Class
106,00 €
1
4W
CWST-RW-W5
ENScape Strobe with Red deep base and White LED - IP65 EN54-23, C, W Class
110,50 €
1
4W
CWST-WR-S5
ENScape Strobe with White low profile base and Red LED EN54-23, C, W Class
106,00 €
1
4W
CWST-WR-W5
ENScape Strobe with White deep base and Red LED - IP65 EN54-23, C, W Class
110,50 €
1
4W
CWST-WW-S5
ENScape Strobe with White low profile base and White LED EN54-23, C, W Class
106,00 €
1
4W
CWST-WW-W5
ENScape Strobe with Red deep base and Red LED - IP65 EN54-23, C, W Class
110,50 €
1
4W
CWW
Deep/ IP65 base, WHITE - Pack of 5
32,25 €
5
4W
D2E
Duct detector housing
201,00 €
1
1W
DST-1
Inlet sampling tube - 30cm
9,80 €
1
3W
DST-1.5
Inlet sampling tube - 45,7cm
11,90 €
1
1W
DST-10
Inlet sampling tube - 325,5cm
36,70 €
1
1W
DST-3
Inlet sampling tube - 91,6cm
15,20 €
1
1W
DST-5
Inlet sampling tube - 152cm
20,50 €
1
1W
ECO1000B
Standard mounting base
8,30 €
1
1W
ECO1000BR
Base with 470R resistor
11,05 €
1
1W
ECO1000BREL12L
12V Relay base latching
21,90 €
1
1W
ECO1000BREL12NL 12V Relay base non latching
21,90 €
1
1W
ECO1000BREL24L
24V Relay base latching
21,90 €
1
1W
ECO1000DB
Deep base
9,80 €
1
1W
ECO1000DBR
Deep base with 470R resistor
11,80 €
1
1W
ECO1002
Optical/thermal detector
41,85 €
1
1W
ECO1003
Optical conventional detector
30,30 €
1
1W
ECO1004T
Fixed thermal conventional detector (78°C)
28,15 €
1
1W
ECO1005
Rate of rise thermal conventional detector
28,15 €
1
1W
ECO1005T
Fixed thermal conventional detector (58°C)
FR-0206.09
FIRERAY 50R
FR-0206.10
FIRERAY 100R
FR-0209
Obscuration filter
FR-0608
F50/100 Back box
FR-0893
F50/100 Wall bracket
FR-1000-007
Laser Pointer
FR-23901.01
Reflective Prism
FR-3000-015 FR-3000-101 FR-3000-201
FIRERAY 3000 Adjustement bracket
FR-3000-202
FIRERAY 3000 Flush mount plate
FR-3000-204
Heater for Fireray 3000
FR-5000-002
FIRERAY 5000 Single detector
FR-5000-004
FIRERAY 5000 Long range kit
FR-5000-005 FR-5000-006
Honeywell | Fire Safety
28,15 €
1
1W
788,00 €
1
3W
1.005,00 €
1
3W
8,10 €
1
3W
93,35 €
1
3W
188,00 €
1
3W
58,50 €
1
3W
75,85 €
1
3W
FIRERAY 3000 Detectors pack
1.022,50 €
1
3W
FIRERAY 3000 System
1.232,50 €
1
3W
203,50 €
1
3W
76,85 €
1
3W
441,00 €
1
4W
788,00 €
1
3W
210,25 €
1
3W
Universal bracket
239,50 €
1
3W
Prism mount plate
128,75 €
1
3W
Benelux region
Price list version 2016_V1.2
Price List Packing Lead unit time
Reference
Description
Price
FR-5000-007
Four prism plate
134,50 €
1
3W
FR-5000-008
Single prism plate
117,00 €
1
3W
FR-5000-009
F5000 controller back box
OBSOLETE
1
FR-5000-010
F5000 Trim plate
OBSOLETE
1
FR-5000-011
F5000 Detector back box
OBSOLETE
1
FR-5000-012
F5000 Cover plate
OBSOLETE
1
FR-5000-014
Universal ceiling mount
FR-5000-039
FIRERAY 5000 single detector
FR-5000-101
FIRERAY 5000 System (50m)
FR-5000-102
FIRERAY 5000 System (100m)
FR-5000-201
461,25 €
1
3W
1.005,00 €
1
3W
940,50 €
1
3W
1.152,50 €
1
3W
Fireray 5000 adjustement bracket
233,50 €
1
4W
FR-5000-204
Heater for Fireray 5000
441,00 €
1
4W
FR-5000-205
Heater for Fireray Prisms
254,50 €
1
4W
FR-5100-204
Heater for Fireray 50/100
441,00 €
1
4W
HRZ2
2 Zones conventional fire alarm panel
314,75 €
1
1W
HRZ4
4 Zones conventional fire alarm panel
387,00 €
1
1W
HRZ8
8 Zones conventional fire alarm panel
536,75 €
1
1W
IRK-2E
LED Remote indicator, white
14,55 €
1
1W
IRK-2E-B
LED Remote indicator with booster
19,50 €
1
1W
IRK-E-SI
LED Remote indicator, ivory
15,10 €
1
1W
IRK-W-624
Waterproof remote indicator
81,05 €
1
1W
K20SBS-01
Key switch, single pole, 2 positions (key removable in both positions), blue
59,40 €
1
4W
K20SGS-01
Key switch, single pole, 2 positions (key removable in both positions), green
59,40 €
1
4W
K20SRS-01
Key switch, single pole, 2 positions (key removable in both positions), red
54,20 €
1
4W
K20SWS-01
Key switch, single pole, 2 positions (key removable in both positions), white
59,40 €
1
4W
K20SYS-01
Key switch, single pole, 2 positions (key removable in both positions), yellow
59,40 €
1
4W
K21SBS-01
Key switch, single pole, 2 positions (key captive in one positions), blue
60,40 €
1
4W
K21SGS-01
Key switch, single pole, 2 positions (key captive in one positions), green
60,40 €
1
4W
K21SRS-01
Key switch, single pole, 2 positions (key captive in one positions), red
55,20 €
1
4W
K21SWS-01
Key switch, single pole, 2 positions (key captive in one positions), white
60,40 €
1
4W
K21SYS-01
Key switch, single pole, 2 positions (key captive in one positions), yellow
60,40 €
1
4W
K30SBS-01
Key switch, single pole, 3 positions (key removable in all positions), blue
67,00 €
1
4W
K30SGS-01
Key switch, single pole, 3 positions (key removable in all positions), green
67,00 €
1
4W
K30SRS-01
Key switch, single pole, 3 positions (key removable in all positions), red
61,80 €
1
4W
K30SWS-01
Key switch, single pole, 3 positions (key removable in all positions), white
67,00 €
1
4W
K30SYS-01
Key switch, single pole, 3 positions (key removable in all positions), yellow
67,00 €
1
4W
1
2
3
4
5
6
7
8
17
Price List Description
Price
KL1 X 5
Pack of 5 earth continuity links
5,40 €
5
4W
M8A-G000SF
M8 Triple pole call point, green, surface mount with plexi
73,50 €
1
2W
MCP1A-R470FF-01
MCP flush with flexible element - red
16,40 €
1
1W
MCP1A-R470FG-01
MCP flush with break glass element - red
15,05 €
1
1W
MCP2A-R470FF-01
MCP flush with flexible element & LED - red
23,90 €
1
1W
MCP2A-R470FG-01
MCP flush with break glass element & LED - red
22,30 €
1
1W
MCP3A-B000FF-11
MCP flush with flexible element - blue
25,25 €
1
4W
MCP3A-B000FG-11
MCP flush with break glass element - blue
23,90 €
1
4W
MCP3A-G000FF-11
MCP flush with flexible element - green
25,20 €
1
4W
MCP3A-G000FG-11
MCP flush with break glass element - green
23,90 €
1
4W
MCP3A-R000FF-01
MCP flush with flexible element with changeover contacts - red
19,95 €
1
1W
MCP3A-R000FG-01
MCP flush with break glass element with changeover contacts - red
18,30 €
1
1W
MCP3A-W000FF-11
MCP flush with flexible element - white
25,25 €
1
4W
MCP3A-W000FG-11 MCP flush with break glass element - white
23,90 €
1
4W
MCP3A-Y000FF-11
MCP flush with flexible element - yellow
25,25 €
1
4W
MCP3A-Y000FG-11
MCP flush with break glass element - yellow
23,90 €
1
4W
MCP4A-B000FF-11
MCP flush with flexible element - blue
52,30 €
1
4W
MCP4A-B000FG-11
MCP flush with break glass element - blue
51,00 €
1
4W
MCP4A-G000FF-11
MCP flush with flexible element - green
52,30 €
1
4W
MCP4A-G000FG-11
MCP flush with break glass element - green
51,00 €
1
4W
56,15 €
1
4W
MCP4A-G000SG-12 MCP surface with break glass and 2P. changeover contacts green, Emergency Door Release marking MCP4A-R000FF-01
MCP flush with flexible element - red
52,05 €
1
4W
MCP4A-R000FG-01
MCP flush with break glass element - red
51,00 €
1
4W
MCP4A-W000FF-11
MCP flush with flexible element - white
52,30 €
1
4W
51,00 €
1
4W
52,30 €
1
4W 4W
MCP4A-W000FG-11 MCP flush with break glass element - white MCP4A-Y000FF-11
18
Packing Lead unit time
Reference
MCP flush with flexible element - yellow
MCP4A-Y000FG-11
MCP flush with break glass element - yellow
51,00 €
1
MCP-LABEL F 007
Foil of ‘PLAIN RED’ labels
OBSOLETE
48
MCP-LABEL F 010
Foil of ‘BRAND FEU’ labels (black on red)
OBSOLETE
48
MCP-LABEL F 014
Foil of ‘BRAND’ labels (black on red)
OBSOLETE
48
MCP-LABEL F 028
Foil of ‘ALARME INCENDIE’ labels (black on red)
58,25 €
48
4W
MCP-LABEL F 048
Foil with 48 ‘KOEPEL COUPOLE’ labels (white on red)
59,30 €
48
2W
MCP-LABEL F 056
Foil of ‘BRAND FEU’ labels (black on yellow)
58,25 €
48
4W
MCP-LABEL F 071
Foil with ‘EMERGENCY STOP’ labels (black on yellow)
58,25 €
48
4W
MCP-LABEL F 078
Foil with EVACUATION’ labels (black on red)
58,25 €
48
4W
MCP-LABEL F 081
Foil with ‘FEU’ labels (black on yellow)
58,25 €
48
4W
MCP-LABEL F 082
Foil of ‘BLUSKNOP’ labels (black on yellow)
58,25 €
48
4W
MCP-LABEL F 103
Foil of ‘GASBLUSSING’ labels (black on yellow)
OBSOLETE
48
MCP-LABEL F 108
Foil with ‘ALARME EVACUATION’ (white on red)
OBSOLETE
48
MCP-LABEL F 120
Foil of ‘BRAND ALARM’ labels (black on red)
OBSOLETE
48
MCP-LABEL F 138
Foil of ‘ALERTE INCENDIE’ labels (black on red)
MCP-LABEL F 141
Foil of ‘BRAND’ labels (black on yellow)
MCP-LABEL F 217
58,25 €
48
OBSOLETE
48
Foil of ‘EXCTINCTION’ labels (black on yellow)
58,25 €
48
4W
MCP-LABEL F 218
Foil of ‘RUNNING MAN’ labels (white on green)
58,25 €
48
4W
MCP-LABEL F 220
Foil of ‘BIJ NOOD DEUR OPEN’ labels (white on blue)
58,25 €
48
4W
MCP-LABEL F 222
Foil of ‘EN54 BURNING HOUSE’ labels (white on red)
58,25 €
48
4W
Honeywell | Fire Safety
Benelux region
Price list version 2016_V1.2
4W
Price List Packing Lead unit time
Reference
Description
Price
MCP-LABEL F 228
Foil of ‘DEUR ONGRENDELING’ labels (white on blue)
58,25 €
48
4W
MCP-LABEL F 235
Foil of ‘ALERTE WAARSHUWING’ labels (black on red)
58,25 €
48
4W
MCP-LABEL F 244
Foil of ‘UITSEL BLUSSING’ labels (white on blue)
58,25 €
48
4W
NBD/R
Surface base - IP55 - red (Available until end of stock)
5,25 €
1
1W
NBD/W
Surface base - IP55 - white (Available until end of stock)
5,25 €
1
1W
NBS/R
Surface base with sealing kit - IP66 - red (Available until end of stock)
9,45 €
1
1W
NBS/W
Surface base with sealing kit - IP66 - white (Available until end of stock)
9,45 €
1
1W
NBS4
Standard base sounder (4 tones)
33,70 €
1
1W
NBSLID/R
DBS white front LID-Pack of 10
10,80 €
10
1W
NBSLID/W
DBS white front LID-Pack of 10
10,80 €
10
1W
NX2/W/A
Xenon strobe - 2W - 24VDC - white, amber lens (Available until end of stock)
59,40 €
1
1W
NX5/W/A
Xenon strobe - 5W - 24VDC - white, amber lens (Available until end of stock)
75,15 €
1
1W
OSE-HPW
OSID Emitter, High power, wired at 24VDC
1.100,00 €
1
4W
OSE-SP-01
OSID Emitter, Standard power, battery version
547,00 €
1
4W
OSE-SPW
OSID Emitter, Standard power, wired at 24VDC
547,00 €
1
4W
OSI-10
OSID Imager, 7° coverage, 24VDC
1.130,00 €
1
4W
OSI-45
OSID Imager, 38° coverage, 24VDC
1.282,50 €
1
4W
OSI-90
OSID Imager, 80° coverage, 24VDC
1.170,00 €
1
4W
OSID-INST
Installation kit for OSID beam detectors
373,00 €
1
4W
OSI-EHE
Environmental housing (IP66) for OSID Emitter
348,25 €
1
4W
OSI-EHI
Environmental housing (IP66) for OSID Imager
443,00 €
1
4W
OSP-001
FTDI cable 1.5m for OSID beam detectors
99,50 €
1
4W
OSP-002
Laser alignment tool for OSID beam detectors
144,75 €
1
4W
PS188
Deep base O-Ring - Pack of 5 (Old partnumber: P 310)
20,05 €
5
4W
PS189
Deep base gasket - Pack of 5 (Old partnumber: P 311)
8,75 €
5
4W
PS200
Transparent protective hinged cover
4,90 €
1
1W
PTR
Semi Flush Tray, Red
2,95 €
1
4W
RA100Z
Remote indicator
29,75 €
1
3W
RTS151
Proof remote station
103,00 €
1
1W
RTS151KEY
Proof remote station with key
142,75 €
1
1W
SB0T
Surface mounting box - blue
5,55 €
1
1W
SC071
Pack of 20 terminal blocks
90,95 €
20
4W
SC076
Earther strap - Pack of 5
21,70 €
5
4W
SFT2000
Installation adapter for suspended ceiling (pack of 10)
42,40 €
10
1W
SG0T
Surface mounting box - green
5,55 €
1
1W
SR0T
Surface mounting box - red
3,55 €
1
1W
SW0T
Surface mounting box - white
5,55 €
1
1W
SY0T
Surface mounting box - yellow
5,55 €
1
1W
WB9201
Rocker switch 2 positions - blue
54,50 €
1
4W
WB9202
Rocker switch double pole On/Off - blue
49,25 €
1
4W
WB9203
Rocker switch 3 positions - blue
61,85 €
1
4W
WB9301
Miniature switch momentary action, non terminated - blue
44,75 €
1
1W
WB9302
Miniature switch momentary action, terminated - blue
60,30 €
1
4W
WB9303
Miniature switch latching, non terminated - blue
45,85 €
1
4W
1
2
3
4
5
6
7
8
19
Price List Description
Price
WB9304
Miniature switch latching, terminated - blue
72,65 €
1
4W
WB9402
Single pole push switch, 2 positions - blue
101,75 €
1
4W
WB9403-11
Single pole push switch - blue. Surface mount. (Old partnumber: WB9401)
35,05 €
1
4W
WCP1A-B470SF-11
MCP surface with flexible element - blue
192,50 €
1
4W
WCP1A-B470SG-11
MCP surface with break glass element - blue
191,50 €
1
4W
WCP1A-G470SF-11
MCP surface with flexible element - green
192,50 €
1
4W
191,50 €
1
4W
WCP1A-G470SG-11 MCP surface with break glass element - green WCP1A-R470SF-01
MCP surface with flexible element - red
160,00 €
1
1W
WCP1A-R470SG-01 MCP surface with break glass element - red
159,00 €
1
1W
WCP1A-W470SF-11 MCP surface with flexible element - white
192,50 €
1
4W
WCP1A-W470SG-11 MCP surface with break glass element - white
191,50 €
1
4W
WCP1A-Y470SF-11
MCP surface with flexible element - yellow
192,50 €
1
4W
WCP1A-Y470SG-11
MCP surface with break glass element - yellow
191,50 €
1
4W
WCP3A-B000SF-11
MCP surface with flexible element - blue
192,50 €
1
4W
WCP3A-B000SG-11
MCP surface with break glass element - blue
191,50 €
1
4W
WCP3A-G000SF-11
MCP surface with flexible element - green
192,50 €
1
4W
191,50 €
1
4W
142,75 €
1
1W
141,75 €
1
1W
WCP3A-G000SG-11 MCP surface with break glass element - green WCP3A-R000SF-01
MCP surface with flexible element - red
WCP3A-R000SG-01 MCP surface with break glass element red
20
Packing Lead unit time
Reference
WCP3A-W000SF-11 MCP surface with flexible element - white
192,50 €
1
4W
WCP3A-W000SG-11 MCP surface with break glass element - white
191,50 €
1
4W
WCP3A-Y000SF-11
MCP surface with flexible element - yellow
192,50 €
1
4W
WCP3A-Y000SG-11
MCP surface with break glass element - yellow
191,50 €
1
4W
WG9201
Rocker switch 2 positions - green
54,70 €
1
4W
WG9202
Rocker switch double pole On/Off - green
49,55 €
1
4W
WG9203
Rocker switch 3 positions - green
61,90 €
1
4W
WG9301
Miniature switch momentary action, non terminated - green
44,90 €
1
1W
WG9302
Miniature switch momentary action, terminated - green
60,40 €
1
4W
WG9303
Miniature switch latching, non terminated - green
45,95 €
1
4W
WG9304
Miniature switch latching, terminated - green
72,75 €
1
4W
WG9402
Single pole push switch, 2 positions - green
101,75 €
1
4W
WG9403-11
Single pole push switch - green. Surface mount (Old partnumber: WG9401)
35,05 €
1
4W
WR9201
Rocker switch 2 positions
54,50 €
1
4W
WR9202
Rocker switch double pole ON/OFF
49,25 €
1
4W
WR9203
Rocker switch 3 positions
61,85 €
1
4W
WR9301
Miniature switch momentary action, non terminated
44,75 €
1
4W
WR9302
Miniature switch momentary action, terminated
60,30 €
1
4W
WR9303
Miniature switch latching, non terminated - red
45,85 €
1
4W
WR9304
Miniature switch latching, terminated - red
72,65 €
1
4W
WR9402
Single pole push switch, 2 positions - red
101,75 €
1
4W
WR9403-11
Single pole push switch - red. Surface mount (Old partnumber: WR9401)
35,05 €
1
4W
WW9201
Rocker switch 2 positions - white
54,50 €
1
4W
WW9202
Rocker switch double pole On/Off -white
49,25 €
1
4W
WW9203
Rocker switch 3 positions - white
61,85 €
1
4W
WW9301
Miniature switch momentary action, non terminated - white
44,75 €
1
1W
Honeywell | Fire Safety
Benelux region
Price list version 2016_V1.2
Price List Packing Lead unit time
Reference
Description
Price
WW9302
Miniature switch momentary action, terminated - white
60,30 €
1
4W
WW9303
Miniature switch latching, non terminated - white
45,85 €
1
4W
WW9304
Miniature switch latching, terminated - white
72,65 €
1
4W
WW9402
Single pole push switch, 2 positions - white
101,75 €
1
4W
WW9403-11
Single pole push switch - white. Surface mount. (Old partnumber: WW9401)
35,05 €
1
4W
WY9201
Rocker switch 2 positions - yellow
54,50 €
1
4W
WY9202
Rocker switch double pole On/Off - yellow
49,25 €
1
4W
WY9203
Rocker switch 3 positions - yellow
61,85 €
1
4W
WY9301
Miniature switch momentary action, non terminated - yellow
44,75 €
1
1W
WY9302
Miniature switch momentary action, terminated - yellow
60,30 €
1
4W
WY9303
Miniature switch latching, non terminated - yellow
45,85 €
1
4W
WY9304
Miniature switch latching, terminated - yellow
72,65 €
1
4W
WY9402
Single pole push switch, 2 positions - yellow
101,50 €
1
4W
WY9403-11
Single pole push switch - yellow. Surface mount (Old partnumber: WY9401)
35,05 €
1
4W
1
2
3
Spare parts for Conventional Systems 020-745-008
4
SPARE INSTALLATION KIT, Includes 8 capacitive end of lines, battery leads, Allen key, panel controls key and sounder end of line resistors.
61,85 €
020-817
SPARE TEXT INSERT LABELS R1, Dutch, French, English, German, Swedish and Danish slide in labels.
14,00 €
1
1W
020-823
SPARE ALLEN KEY 4MM RIGHT ANGLE
14,00 €
1
1W
020-849
TWO ZONE REPLACEMENT PCB
270,50 €
1
1W
020-850
FOUR ZONE REPLACEMENT PCB
342,75 €
1
1W
020-851
EIGHT ZONE REPLACEMENT PCB
489,50 €
1
1W
020-852
REPLACEMENT POWER SUPPLY BASEBOARD FOR NFS PANEL RANGE
159,50 €
1
1W
020-865
PACK OF 10 SPARE RED KEYS
64,80 €
10
1W
C 690
SPARE KEY FOR KEY SWITCHES 2 POSITIONS RAINPROOF UNIT
8,70 €
1
4W
C 71
SPARE KEY FOR KEY SWITCHES 2 POSITIONS
OBSOLETE
1
G21534
EN54 break glass for MI call points with Morley-IAS branding (Pack of 10)
OBSOLETE
10
MUS 156
Spare EN54 break glass for all KAC call points - pack of 10
18,35 €
10
OSE-RBA
Spare alkanine battery for emitter OSE-SP-01
PS230
SPARE EN54 FLEXIBLE OP. ELEMENTS FOR MCP CALL POINTS (PACK OF 10)
1
1W
5
6
7
8
1W
119,50 €
1
3W
27,60 €
10
1W
SC011
SCREWS FOR MCP CALL POINTS (PACK OF 100)
77,40 €
100
4W
SC070
PACK OF 10 SPARE TEST KEYS FOR MCP
13,15 €
10
1W
SC071
PACK OF 20 TERMINAL BLOCKS FOR MCP
90,95 €
20
4W
SC080
SPARE KEY FOR KEY SWITCHES 3 POSITIONS (pack of 6; old partnumber: C 273) (Available until end of stock)
52,25 €
1
4S
SC086
Spare key for keyswitch 2 positions, K2xD range (pack of 6; old partnumber: C 787)
52,25 €
6
3W
SC087
Spare key for keyswitch 3 positions, K2xD range (pack of 6; old partnumber: C 788)
52,25 €
6
3W
SLENSA
STAND ALONE STROBE AMBER CLIP-ON LENS
OBSOLETE
1
SLENSR
STAND ALONE STROBE RED CLIP-ON LENS
OBSOLETE
1
21
Price List
22
Packing Lead unit time
Reference
Description
SSLENSA
SOUNDER STROBE AMBER CLIP-ON LENS
OBSOLETE
1
SSLENSR
SOUNDER STROBE RED CLIP-ON LENS
OBSOLETE
1
WF1-EN54
SPARE EN54 FLEXIBLE OPERATING ELEMENT FOR W CALL POINTS
1,60 €
1
Honeywell | Fire Safety
Benelux region
Price
Price list version 2016_V1.2
4W
Price List Reference
Description
Packing Lead unit time
Price
3. Extinguishing systems A08658
“Vietato entrare spegnimento automatico imminente”
20,55 €
1
6W
A08660
“Allarme incendio”
20,55 €
1
4W
A08660-W
“ALLARME INCENDIO” - IP65
20,55 €
1
4W
A08664
“Abbandonare il locale”
20,55 €
1
4W
A08664-W
“ABBANDONARE IL LOCALE” - IP65
20,55 €
1
4W
A08666
“Extinguishing in progress”
20,55 €
1
4W
A08666-W
“EXTINGUISHING IN PROGRESS” - IP65
20,55 €
1
4W
A08667
“Alarm”
20,55 €
1
4W
A08667-W
“ALARM” -IP65
20,55 €
1
4W
A08668
“Fire alarm”
20,55 €
1
4W
A08668-W
“FIRE ALARM” - IP65
20,55 €
1
4W
A08669
“Do not enter”
20,55 €
1
4W
A08670
“Alarme incendie”
20,55 €
1
4W
A08670N
“Brandalarm”
20,55 €
1
1W
A08670N-W
“BRANDALARM” - IP65
27,35 €
1
1W
A08671
“Evacuation immediate”
20,55 €
1
4W
A08671N
“Ontruimingsalarm”
20,55 €
1
4W
A08671N-W
“ONTRUIMINGSALARM” - IP65
27,35 €
1
4W
A08671-W
“EVACUATION IMMEDIATE” - IP65
27,35 €
1
4W
A08672
“Entree interdite”
20,55 €
1
1W
A08672N
“Verboden toegang - gasalarm”
20,55 €
1
1W
A08672N-W
“VERBODEN TOEGANG - GASALARM” - IP65
27,35 €
1
1W
A08672-W
“ENTREE INTERDITE” - IP65
27,35 €
1
1W
A08673
“Eintritt verboten”
20,55 €
1
4W
A08674
“Feueralarm”
20,55 €
1
4W
A08675
“Tiefgarage sofort verlassen”
20,55 €
1
4W
A08676
“Betreten verboten - gasalarm”
20,55 €
1
4W
A5055 SS
LED’s light signalling panel
124,50 €
1
1W
A5555 SS
LED’s light signalling panel IP65
178,75 €
1
6W
ECP-804900
Manual release call point- class B
60,15 €
1
1W
ECP-804902
Electric stop push button - class B
70,35 €
1
1W
ESS-704917
IP55 kit for ECP call points
50,60 €
1
4W
ITAC
Interface module RP1r
353,50 €
1
1W
PUL-D/EXT
Manual release call point
36,00 €
1
4W
PUL-P/EXT
Manual stop push button
36,00 €
1
4W
RACK-SUPRA
19” rack mounting kit for VSN-RP1r+ panel
173,50 €
1
4W
TFT-SUPRA
Spare TFT 4,3” Touchscreen display for VSN-RP1r+
305,50 €
1
4W
VSN-232
RS 232 serial interface
183,25 €
1
1W
VSN-4REL
4 Relay board
136,75 €
1
1W
VSN-RP1r+
Extinguishing control panel
1.130,00 €
1
1W
1
2
3
4
5
6
7
8
Spare parts for Extinguishing Systems ECP-25566A
Foil of 24 Dutch labels for ECP-804900
6,85 €
24
1W
ECP-25566A-W
Foil of 12 Dutch and 12 French labels for ECP-804902
6,85 €
12
1W
23
Price List
24
Packing Lead unit time
Reference
Description
Price
ECP-LABELS B
FRONT LABEL FOIL FOR ELECTRIC STOP PUSH BUTTON, includes Dutch, French, English, German & Italian labels
OBSOLETE
1
ECP-LABELS Y
FRONT LABEL FOIL FOR MANUAL CONTROL UNIT, includes Dutch, French, English, German & Italian labels
OBSOLETE
1
ESS-704901
BLUE HOUSING FOR ELECTRIC STOP PUSH BUTTON includes plastic key
9,10 €
1
4W
ESS-704902
YELLOW HOUSING FOR ELECTRONIC CONTROL UNIT includes plastic key
9,10 €
1
4W
ESS-704910
Break glass
8,00 €
1
1W
ESS-704911
FRONT LABEL FOIL FOR ELECTRIC STOP PUSH BUTTON includes Dutch, French, English, German & Italian labels (Pack of 10; Replacement for ECP-LABELS B)
11,50 €
10
2W
ESS-704912
FRONT LABEL FOIL FOR MANUAL CONTROL UNIT, includes Dutch, French, English, German & Italian labels (Pack of 10; Replacement for ECP-LABELS Y)
8,85 €
10
2W
ESS-769910
PLASTIC KEY FOR CLASS B MCP
0,50 €
1
4W
PUL-TAP
Spare cover for PUL-VSN/EXT (Pack of 5)
26,86 €
5
4W
RP1r-CLL
SPARE LOCK + KEY (1 KEY ONLY)
76,90 €
1
4W
RP1r-FA
RP1r SPARE POWER SUPPLY UNIT
101,75 €
1
4W
RP1r-PCB
VSN - RP1r BASE PCA ASSEMBLY KIT
508,00 €
1
1W
RP1R-SUPRA-KEY
Spare keylock & key for VSN-RP1R+
25,45 €
1
4W
RP1R-SUPRA-PCB
RP1r-SUPRA PCB PANEL
789,25 €
1
4W
TFT-SUPRA
Spare TFT 4,3” Touchscreen display for VSN-RP1r+
305,50 €
1
4W
VSN-LL
Key switch for level 2 access (only for VSN-RP1r)
59,90 €
1
1W
Honeywell | Fire Safety
Benelux region
Price list version 2016_V1.2
Price List Reference
Description
Packing Lead unit time
Price
4. Special equipment 02-WT-01
External water trap kit
202,00 €
1
3W
20/20-005
Swivel mount stainless steel for 20/20-M series
243,75 €
1
5W
20/20-787
Air shield for mini series
211,50 €
1
5W
20/20-794079-3
Commissioning tools kit for mini series
581,00 €
1
5W
20/20MI-1-1-F
Triple IR Detector low powered - 10-40m - ATEX
3.332,50 €
1
4W
20/20MI-3-1-F
Triple IR detector low powered - 2,5-10m - ATEX
3.332,50 €
1
4W
20/20MPI-R
Triple IR detector flame detector, relay outputs
1.825,00 €
1
4W
40/40-001
Tilt mount for 40/40 flame detectors
247,25 €
1
6W
40/40-777163
Stainless steel weather cover
264,25 €
1
6W
40/40-777166
Laser pointer
1.047,50 €
1
6W
40/40-777650
Air shield
939,25 €
1
6W
40/40-777820
Handheld pocket pc diagnostics kit
3.317,50 €
1
6W
40/40-777910
Window protector (dust cap) for 40/40 flame detectors
9,20 €
1
5W
40/40-789260-1
Pole mount (U-BOLT) - 3”
306,50 €
1
5W
40/40-789260-2
Pole mount (U-BOLT) - 2”
306,50 €
1
5W
40/40-794079-5
USB connection kit for PC
608,00 €
1
6W
40/40-A0000231
TCC-80 RS-232 to RS-485 convertor
125,50 €
1
2W
40/40-ADD-85
Supplement for a calibration to 85°C
330,25 €
1
6W
40/40-ADD-ST
Supplement for a stainless steel housing
211,50 €
1
6W
40/40-I
Triple IR detector
5.150,00 €
1
6W
40/40-L
UV/IR dual detector
3.602,50 €
1
6W
40/40-L4
UV/IR (4,5µm) dual detector
3.602,50 €
1
6W
40/40-L4B
UV/IR (4,5µm) dual detector with built in test kit
3.955,00 €
1
6W
40/40-LB
UV/IR dual detector with built in test kit
4.052,50 €
1
6W
40/40-M
Multi sensor detector
5.720,00 €
1
6W
40/40-R
Single IR detector
3.465,00 €
1
6W
40/40-U
UV detector
2.865,00 €
1
1W
40/40-UB
UV detector with built in test kit
3.847,50 €
1
6W
510-FIN
Capillary flush sample point kit for 25mm pipes (end cap), red
50,60 €
1
4W
510-KIT
Capillary flush sample point kit for 25mm pipes (end cap), red
50,60 €
1
4W
520-MTS-80R
Pack of 5 sampling point kits, red (for 510-KIT only)
21,90 €
5
4W
5451EISE
IS Conventional heat detector
OBSOLETE
1
7100X
FAAST high sensitive aspiration system (Availability will be announced)
T.B.A.
1
8100E-BNL
FAAST XM High sensitive aspiration system, stand alone version
3.577,50 €
1
9400X
FAAST high sensitive aspiration system (Availability will be announced)
T.B.A.
1
ABS 001/25
90° Sweeping bend diameter 25mm red, pack of 10
99,40 €
10
ABS 001/25-WH
90° Sweeping bend diameter 25mm red, pack of 10
109,50 €
10
1W
ABS 002/25
45° Sweeping bend diameter 25mm, pack of 10
34,45 €
10
1W
1
2
3
4
5
6
7
8
1W
1W
ABS 002/25-WH
45° Sweeping bend diameter 25mm, pack of 10
38,45 €
10
1W
ABS 003/25
Socket union diameter 25 mm, pack of 10
103,50 €
10
1W
ABS 003/25-WH
Socket union diameter 25 mm white, Pack of 10
116,00 €
10
1W
ABS 004
Pipe clips - red, pack of 10
13,85 €
10
1W
ABS 004-WH
Pipe clips - red, pack of 10
15,30 €
10
1W
ABS 005/25
Jointing socket diameter 25 mm, pack of 10
13,85 €
10
1W
25
Price List Reference
Description
ABS 005/25-WH
Jointing socket diameter 25 mm, pack of 10
15,30 €
10
1W
ABS 005-1
25mm to 27mm adapter, pack of 10
13,85 €
10
1W
ABS 005-1-WH
25mm to 27mm adapter, pack of 10
15,30 €
10
1W
ABS 006/25
T’ piece diameter 25mm, pack of 10
68,95 €
10
1W
ABS 006/25-WH
T’ piece diameter 25mm, pack of 10
76,85 €
10
1W
ABS 007/25
End cap diameter 25mm, pack of 10
13,85 €
10
1W
ABS 007/25-WH
End cap diameter 25mm, pack of 10
15,30 €
10
1W
ABS 008/25
Pipe diameter 25 mm - 3 metres long, pack of 10
147,00 €
10
1W
ABS 008/25-WH
Pipe diameter 25 mm - 3 metres long, pack of 10
164,00 €
10
1W
ABS 010
Warning labels for capillary sampling point, roll of 100 pieces
33,35 €
100
1W
ABS 011
Cement 250ml
25,20 €
1
1W
ABS 019C/25
Capillary sampling point- conical head pipe
40,70 €
1
1W
ABS 019C/25EC
Capillary end cap sampling point- conical head
40,70 €
1
1W
ABS 019C/25EC-WH Capillary end cap sampling point- conical head
44,65 €
1
1W
ABS 019C/25-WH
Capillary sampling point- conical head pipe
44,65 €
1
1W
ABS 019F/25
Capillary sampling point-flush disc
40,70 €
1
1W
ABS 019F/25EC
CapillarY END CAP sampling point-flush disc t008/25 pipe
40,70 €
1
1W
ABS 019F/25EC-WH CapillarY END CAP sampling point-flush disc t008/25 pipe ABS 019F/25-WH
Capillary sampling point-flush disc
44,65 €
1
1W
44,65 €
1
1W
ABS 020/25
Capillary sampling point- discrete sampling point 8mm
33,35 €
1
1W
ABS 020/25EC
Capillary END CAP sampling point- discrete sampling point 8mm
33,35 €
1
1W
ABS 020/25EC-WH
Capillary END CAP sampling point- discrete sampling point 8mm
37,05 €
1
1W
ABS 020/25-WH
Capillary sampling point-discrete sampling point 8mm
37,05 €
1
1W
ABS 021/25
Capillary end cap for abs 008/25 pipe
18,65 €
1
1W
ABS 021/25-WH
Capillary end cap for abs 008/25 pipe
20,35 €
1
1W
ABS 022/25
Capillary t piece for abs 008/25 pipe
28,30 €
1
1W
ABS 022/25-WH
Capillary t piece for abs 008/25 pipe
31,05 €
1
1W
ABS 030/25
90° flexible sweeping bend diameter 25mm, transparant
31,05 €
1
1W
ABS CAP-RED
10mm Nylon tube - red (per metre)
4,50 €
1
1W
ABS CAP-WHITE
10mm Nylon tube - opaque (per metre)
5,75 €
1
2W
ACT-OPUS
Comfort switch for SVM Panel
136,25 €
1
4W
ACT-SVM24V-5A-BASIC Control Panel SVM 24V-5A Basic
840,75 €
1
3W
ACT-SVM24V-5A-CS
883,00 €
1
3W
964,00 €
1
3W
921,75 €
1
3W
930,75 €
1
3W
Control Panel SVM 24V-5A incl. comfort switch
ACT-SVM24V-5A-F-CS Control Panel SVM 24V-5A incl. fire and comfort switch ACT-SVM24V-5A-FS
Control Panel SVM 24V-5A incl. fire switch
ACT-SVM24V-8A-BASIC Control Panel SVM 24V-8A basic ACT-SVM24V-8A-CS
Control Panel SVM 24V-8A incl. comfort switch
ACT-SVM24V-8A-F-CS Control Panel SVM 24V-8A incl. fire and comfort switch
26
Packing Lead unit time
Price
978,50 €
1
3W
1.060,00 €
1
3W
1.012,50 €
1
3W
ACT-SVM24V-8A-FS
Control Panel SVM 24V-8A incl. fire switch
ACT-VR-1
Wind and rain detector for SVM panel
860,50 €
1
4W
ACT-WSK
Fire switch for SVM panel
159,50 €
1
4W
B6782-071
Barrier encloser for 2 x MTL7761AC
OBSOLETE
1
CR-123
Main lithium battery for wireless devices
6,10 €
1
1W
CR-2032
Back up lithium battery for wireless devices
2,65 €
1
1W
DA5-24VDC
IS sounder 100dB 26 tones, 2 inputs, IP65 incl. Slow whoop tone
529,50 €
1
8W
F-A3384-000
Integral Filter for Faast 8100E
150,25 €
1
3W
Honeywell | Fire Safety
Benelux region
Price list version 2016_V1.2
Price List Reference
Description
Packing Lead unit time
Price
F-AF-2.0
Aspiration Reducing Film Sheet 2.0mm
38,65 €
10
3W
F-AF-2.5
Aspiration Reducing Film Sheet 2.5mm
38,65 €
10
3W
F-AF-3.0
Aspiration Reducing Film Sheet 3.0mm
38,65 €
10
3W
F-AF-3.6
Aspiration Reducing Film Sheet 3.6mm
38,65 €
10
3W
F-AF-4.0
Aspiration Reducing Film Sheet 4.0mm
38,65 €
10
3W
F-AF-4.6
Aspiration Reducing Film Sheet 4.6mm
38,65 €
10
3W
F-AF-5.0
Aspiration Reducing Film Sheet 5.0mm
38,65 €
10
3W
F-AF-5.6
Aspiration Reducing Film Sheet 5.6mm
38,65 €
10
3W
F-AF-6.0
Aspiration Reducing Film Sheet 6.0mm
38,65 €
10
3W
F-BS
Banderole for Suction- Reducing Foil
38,65 €
10
3W
FL0111E
FAAST-LT Stand Alone - 1 channel with 1 laser detector
2.575,00 €
1
3W
FL0112E
FAAST-LT Stand Alone - 1 channel with 2 laser detectors (common chamber)
2.840,00 €
1
3W
FL0122E
FAAST-LT Stand Alone - 2 channels with 2 laser detectors (separated chambers)
2.980,00 €
1
3W
FL-IF-6
FAAST LT Integral Filters (pack of 6)
72,75 €
6
3W
F-LT-EB
Earth bar for FAAST LT
20,20 €
1
3W
F-PC
Pipe cutter, for pipes up to 27mm
FR-23835.00
EExd Wall Bracket
FR-24006-01
FIRERAY EExd
GDA-CH12 GDA-CH12-NA
49,40 €
1
3W
1
1W
4.505,00 €
1
1W
ATEX cable gland
63,10 €
1
4W
ATEX cable gland
39,65 €
1
4W
GDA-M/B-KF4A
Mounting Brackets
9,30 €
1
4W
HD6295
IP67 sensor. T°: 60°C
107,50 €
1
1W
HD6296
IP67 sensor. T°: 80°C
134,25 €
1
1W
HD6297
IP67 sensor. T°: 100°C
154,75 €
1
1W
HD6298
IP67 sensor. T°: 120°C
166,25 €
1
1W
IST200E
Interface module for IS analogue devices
397,25 €
1
1W
K-LB-1.30G
Surge Protection barrier
392,50 €
1
4W
LHD-BLACK
Nylon coated high resistance analogue cable (MOQ = 100m; per 100m; price per meter)
13,95 €
1
4W
LHD-BLUE
Standard high resistance analogue cable (MOQ = 100m; per 100m; price per meter)
10,70 €
1
4W
LHD-BRONZE
Bronze braided high resistance analogue cable (MOQ = 100m; per 100m; price per meter)
19,25 €
1
4W
LHD-CT
Cable ties (100/set)
99,85 €
100
4W
LHD-DP
200mm distance piece for edge clip
13,25 €
1
4W
LHD-EC14.2
Edge clip, 14-20mm WEB
4,55 €
1
4W
LHD-EC2.3
Edge clip, 2-3mm WEB
4,55 €
1
4W
LHD-EC3.8
Edge clip, 3-8mm WEB
4,55 €
1
4W
LHD-EC8.18
Edge clip, 8-14mm WEB End line termination kit
LHD-ILJK
In line jointing kit
LHD-LWM1
Electronic interface module
LHD-NS
Neoprene sleeving
LHD-PC
Pipe clip
LHD-STAINLESS
Nylon stainless steel braided high resistance analogue cable (MOQ = 100m; per 100m; price per meter)
LHD-TC
T clip
2
3
300,50 €
LHD-ELTK
1
4,55 €
1
4W
61,30 €
10
4W
102,50 €
10
4W
1.512,50 €
1
4W
1,05 €
1
4W
7,25 €
1
4W
37,35 €
1
4W
1,20 €
1
4W
4
5
6
7
8
27
Price List Reference
Description
LHD-VC
V clip (incl. rubber)
12,90 €
1
4W
M200-SMB
Surface mount box
12,15 €
1
1W
MCP1A-R470FF-01IS
IS MCP with flexible element 470R
34,30 €
1
4W
33,30 €
1
4W
40,80 €
1
1W
39,65 €
1
1W
OBSOLETE
1
162,75 €
1
1W
MCP1A-R470FG-01IS IS MCP with break glass element 470R MCP3A-R000FF-01IS
IS MCP with flexible element
MCP3A-R000FG-01IS IS MCP with break glass element MCP5A-RP03SF-K013-01IS MCP intrinsic safe red, EN54 Markings MI-DCZRM
Conventional zone input module
MI-FL2011EI
FAAST-LT Loop based - 1 channel with 1 laser detector
1.512,50 €
1
3W
MI-FL2012EI
FAAST-LT Loop based - 1 channel with 2 laser detectors, 1 chamber common
1.832,50 €
1
3W
MI-FL2022EI
FAAST-LT Loop based - 1 channel with 2 laser detectors, 2 chambers
2.192,50 €
1
3W
MS1/R
Industrial sounder MAX. 106dB
68,10 €
1
1W
MS1/R/IS
IS sounder 100dB 32 tones - IP55 - Includes Slow Whoop tone
474,75 €
1
1W
MS2/R/R
Xenon strobe - 24VDC - 5W - Red
116,00 €
1
1W
MS5/R/R
Industrial strobe and sounder 5 W - 106dB - 32 tones
197,75 €
1
1W
MTL5525
Galvanic isolator for IS sounders
320,00 €
1
1W
MTL5561
2 Channel galvanic isolator for IS conv. det
621,50 €
1
1W
MTL7761AC
Intrinsically Safe Zener Barrière
227,25 €
1
4W
PIP-025
25mm x 12” Condensation valve trap with ball valve
295,00 €
1
4W
PIP-033
25mm Sight glass with condensation drain
55,25 €
1
4W
RIV-601P/F
IP65 waterproof IR flame detector
1.912,50 €
1
3W
RIV-601P/FA
RIV-601/F IR flame detector with eex-proof enclosure
3.185,00 €
1
3W
SAHEP-APRICOLOR Chain motor, 24VDC, 300N, 150N
433,50 €
1
4W
SAHEP-DS24VDC350 Motor 24VDC 650N 5 cm IP65
298,50 €
1
6W
SAHEP-DS24VDC550 Motor 24VDC 650N 55 cm IP65
314,75 €
1
1W
SAHEP-DS24VDC750 Motor 24VDC 650N 75 cm IP65
325,25 €
1
1W
SAHEP-DS24VDC950 Motor 24VDC 200N 95 cm IP65
434,75 €
1
6W
SAHEP-DUO24VDC550 Motor 24VDC 600N 55 cm IP65 for dual arms
341,75 €
1
6W
SAHEP-DUO24VDC750 Motor 24VDC 600N 75 cm IP65 for dual arms
412,00 €
1
6W
SAHEP-DUODR550 Slave arm for duo 55cm
135,25 €
1
6W
SAHEP-DUODR750 Slave arm for duo 75cm
156,75 €
1
6W
53,70 €
1
4W
678,00 €
1
1W
OBSOLETE
1
SAHEP-EFS-SENSOR
Temperature sensor 70°C for SAHEP-4N-EFS
SAHEP-MI-SAHEP-4
Smoke and heat evacuation panel for 4 motors
SAHEP-MI-SAHEP-4.EM
Smoke evacuation panel for door holders
SAHEP-MI-SAHEP-4-EFS Smoke and heat evacuation panel 8A, slave version
28
Packing Lead unit time
Price
715,00 €
1
4W
113,00 €
1
4W
92,35 €
1
6W
SAHEP-PRIOR
Additional external fire brigade priority control
SAHEP-PROFIL U
U profile for DS24VDCXXX
SAHEP-RD
Rain detector
141,25 €
1
6W
SAHEP-TT130
Assembling kit for duo 55cm
54,20 €
1
6W
SAHEP-TT160
Assembling kit for duo 75cm
59,90 €
1
6W
SAHEP-WD
Wind detector
146,75 €
1
6W
SAHEP-WRD1
Wind & rain detector control unit
238,25 €
1
6W
SG/CI
Plexi protection cap for SGCP100
13,60 €
1
4W
SG/SC
Supplement for special coated detector
110,50 €
1
1W
SG100
Wireless optical smoke detector
245,25 €
1
1W
SG200
Wireless multi-tech optic / heat detector
249,00 €
1
1W
Honeywell | Fire Safety
Benelux region
Price list version 2016_V1.2
Price List Packing Lead unit time
Reference
Description
Price
SG350
Wireless heat detector
245,25 €
1
1W
SGCP100
Wireless manual call point
297,00 €
1
1W
SGCWE100
Sagittarius conventional system - Expander module
404,50 €
1
4W
SG-CWS100-AV-KIT
Wireless wall mounted sounder/beacon, red
374,00 €
1
4W
SG-CWS100-KIT
Wireless wall mounted sounder, red
354,00 €
1
1W
SGFI200-S
Remote led indicator
267,25 €
1
1W
SG-LBS100
Lid for SGRBS100
12,10 €
1
4W
SGMC200
Wireless control module
203,00 €
1
1W
SGMCB200
Wireless control module
436,25 €
1
1W
SGMI200
Wireless monitored input module
218,75 €
1
1W
SG-PU
Display module with keypad
342,75 €
1
1W
SGRBS100
Wireless sounder base
376,25 €
1
1W
SGRBS100-AV
Wireless audiovisual sounder base
431,00 €
1
1W
SGRS100-H
As SGRS100 but with slow whoop
397,50 €
1
1W
SGRS100-H/W
As SGRS100/W but with slow whoop
397,50 €
1
1W
SGWCP100
Wireless manual call point, weatherproof
621,25 €
1
4W
SGWE
Wireless expander
321,25 €
1
4W
SGWE-BE
Wireless signal booster
287,00 €
1
1W
SGWRS100-H
As SGRS100 but water proof
OBSOLETE
1
SGWRS100-H/W
As SGRS100/W but water proof
OBSOLETE
1
SMB500
Surface mount box (for IST200E)
11,90 €
1
1W
SOA-875
Variable direction stand for RIV-601P/FA
639,75 €
1
3W
SOR-873P
Variable direction stand for RIV-601P/F
308,50 €
1
4W
TMP_Configurator
Software for TMP2 maintenance & configuration
1.615,00 €
1
4W
TMP2-D-A257R1A
Rate of Rise dust thermal detector - 57°C
357,25 €
1
4W
TMP2-D-A257S1A
Fixed temp. dust thermal detector - 57°C
357,25 €
1
4W
TMP2-D-C90R1A
Rate of Rise dust thermal detector - 90°C
357,25 €
1
4W
TMP2-D-C90S1A
Fixed temp. dust thermal detector - 90°C
357,25 €
1
4W
TMP2-D-D110R1A
Rate of Rise dust thermal detector - 110°C
357,25 €
1
4W
TMP2-D-D110S1A
Fixed temp. dust thermal detector - 110°C
357,25 €
1
4W
TMP2-P-A257R1A
Rate of Rise dust thermal detector - 57°C
231,25 €
1
4W
TMP2-P-A257S1A
Fixed temp. dust thermal detector - 57°C
231,25 €
1
4W
TMP2-P-C90R1A
Rate of Rise dust thermal detector - 90°C
231,25 €
1
4W
TMP2-P-C90S1A
Fixed temp. dust thermal detector - 90°C
231,25 €
1
4W
TMP2-P-D110R1A
Rate of Rise dust thermal detector - 110°C
231,25 €
1
4W
TMP2-P-D110S1A
Fixed temp. dust thermal detector - 110°C
231,25 €
1
4W
1
2
3
4
5
TMP2-ST14
EEx-d junction box for end-of-line resistor
90,00 €
1
4W
TMP2-TO-A257R1A
Rate of Rise Eexd thermal detector - 57°C
432,00 €
1
4W
TMP2-TO-A257S1A
Fixed temp. Eexd thermal detector - 57°C
432,00 €
1
4W
TMP2-TO-C90R1A
Rate of Rise Eexd thermal detector - 90°C
432,00 €
1
4W
TMP2-TO-C90S1A
Fixed temp. Eexd thermal detector - 90°C
432,00 €
1
4W
TMP2-TO-D110R1A
Rate of Rise Eexd thermal detector - 110°C
432,00 €
1
4W
TMP2-TO-D110S1A
Fixed temp.Eexd thermal detector - 110°C
V6/B/24V
EEX Proof strobe - IP66 - Blue
432,00 €
1
4W
1.375,00 €
1
12W
V6/C/24V
EEX Proof strobe - IP66 - Clear lens
1.367,50 €
1
6W
V6/G/24V
EEX Proof strobe - IP66 - Green
1.375,00 €
1
12W
V6/R/24V
EEX Proof strobe - IP66 - Red
1.375,00 €
1
12W
6
7
8
29
Price List Reference
Description
V6/Y/24V
EEX Proof strobe - IP66 - Yellow
VLC-50000-MRN
VESDA LaserCOMPACT – Marine RO
VLC-500RO
VESDA VLC – Relays Only
VLC-50500-MRN VLC-505VN VLF-250
1.375,00 €
1
OBSOLETE
1
4.297,50 €
1
VESDA LaserCOMPACT – Marine VN
OBSOLETE
1
Detector via relays and VESDAnet
OBSOLETE
1
Air Sampling Smoke Detector
3.110,00 €
1
1W
12W 1W
VLF-500
Early warning smoke detector
3.900,00 €
1
1W
VLP-002
LaserPlus with display
7.687,50 €
1
1W
VLP-012
LaserPlus display programmer
9.042,50 €
1
1W
VLP-400
LaserPlus detector
6.387,50 €
1
1W
VLS-204
LaserScanner detector standart display
12.547,50 €
1
1W
VLS-214
LaserScanner with display and programmer 7 relays
13.902,50 €
1
1W
VLS-304
LaserScanner with display 12 relays
13.055,00 €
1
1W
VLS-314
LaserScanner with display and programmer 12 relays
14.470,00 €
1
1W
VLS-600
LaserScanner detector
11.360,00 €
1
1W
VLS-700
LaserScanner three blank plates/leds 12 relays
12.040,00 €
1
1W
VSP-005
Filter cartridge for Vesda
161,25 €
1
3W
VSP-850-G
External filter for very harsh environment
374,25 €
1
1W
VSP-850-R
External filter for very harsh environment
374,25 €
1
1W
VSP-855-20
Replacement filter element for VSP-850-G (pack of 20)
587,25 €
20
4W
VSP-855-4
Replacement filter element for VSP-850-G (4 pack)
187,00 €
4
4W
WCP1A-B470SF-01IS
Waterproof IS MCP with flexible element - blue
246,75 €
1
4W
WCP1A-B470SG-01IS
Waterproof IS MCP with break glass element- blue
245,75 €
1
4W
WCP1A-G470SF-01IS
Waterproof IS MCP with flexible element - green
246,75 €
1
4W
245,75 €
1
4W
WCP1A-G470SG-01IS Waterproof IS MCP with break glass element - green WCP1A-R470SF-01IS
Waterproof IS MCP with flexible element - red
206,50 €
1
1W
WCP1A-R470SG-01IS
Waterproof IS MCP with break glass element - red
205,50 €
1
1W
WCP1A-W470SF-01IS Waterproof IS MCP with flexible element - white
247,75 €
1
4W
WCP1A-W470SG-01IS Waterproof IS MCP with break glass element - white
245,75 €
1
4W
WCP1A-Y470SF-01IS
Waterproof IS MCP with flexible element - yellow
246,75 €
1
4W
WCP1A-Y470SG-01IS
Waterproof IS MCP with break glass element - yellow
245,75 €
1
4W
WCP3A-B000SF-01IS
Waterproof IS MCP with flexible element - blue
246,75 €
1
4W
WCP3A-B000SG-01IS
Waterproof IS MCP with break glass element - blue
245,75 €
1
4W
WCP3A-G000SF-01IS
Waterproof IS MCP with flexible element - green
246,75 €
1
4W
246,75 €
1
4W
WCP3A-G000SG-01IS Waterproof IS MCP with break glass element - green
30
Packing Lead unit time
Price
WCP3A-R000SF-01IS
Waterproof IS MCP with flexible element - red
206,50 €
1
4W
WCP3A-R000SG-01IS
Waterproof IS MCP with break glass element - red
205,50 €
1
4W
WCP3A-W000SF-01IS Waterproof IS MCP with flexible element - white
246,75 €
1
4W
WCP3A-W000SG-01IS
Waterproof IS MCP with break glass element - white
245,75 €
1
4W
WCP3A-Y000SF-01IS
Waterproof IS MCP with flexible element - yellow
246,75 €
1
4W
WCP3A-Y000SG-01IS
Waterproof IS MCP with break glass element - yellow
246,75 €
1
4W
Y05/R/IS
IS sounder 105dB 32 tones - IP56 Includes Slow whoop tone
571,25 €
1
12W
Y05D
Industrial sounder 24V 110dB
165,75 €
1
1W
Y06/R/24V
EEX Sounder 110dB 32 tones - IP66 - Red
1.287,50 €
1
12W
Y08/SD_YA80/D/RF/SU Industrial super sounder 24V 120dB
551,00 €
1
12W
Y08D
Industrial sounder 24V 116dB
405,00 €
1
1W
Y72221
Galvanic isolator for IS analogue devices
864,00 €
1
1W
Honeywell | Fire Safety
Benelux region
Price list version 2016_V1.2
Price List Reference
Description
YL6/R/24V
EEX Sounder-strobe 110dB 32 tones - IP66
Packing Lead unit time
Price
2.155,00 €
1
12W
Spare parts for Special Equipments 02-FL53
REPLACEMENT FILTER FOR A300 SERIES 20PPI (PACK OF 10)
103,00 €
10
1W
02-FL56
REPLACEMENT FILTER FOR A300 SERIES 45PPI (PACK OF 10)
103,00 €
10
1W
20-LA00015-03
REPLACEMENT KEY TO OPEN A300 ENCLOSURE
32,25 €
1
3W
F-A-LC-A
Language Card Faast 8100e
21,70 €
1
1W
MSD/A
DOME FOR MS2/ AMBER
56,80 €
1
8W
MSD/B
DOME FOR MS2/ BLUE
56,80 €
1
8W
MSD/R
DOME FOR MS2/ RED
56,80 €
1
8W
SAHEP-KEY
Spare key for Sahep (1 piece)
9,00 €
1
4W
SAHEP-PCB
Replacement PCB for SAHEP-4N
536,75 €
1
4W
SAHEP-PLEXI/M-IAS BREAKGLASS PLEXI FOR MI-SAHEP-4 WITH MORLEY-IAS LOGO
9,00 €
1
1W
SG-M210
1,55 €
1
4W
Spare test key for SGCP100
1
2
3
4
5
6
7
8
31
Price List Reference
32
Honeywell | Fire Safety
Description
Benelux region
Price
Price list version 2016_V1.2
Packing Lead unit time
Price List Reference
Description
Packing Lead unit time
Price
5. Gas detection systems S1450CO
CARBON MONOXIDE (CO) detector
379,50 €
1
1W
S1451ND
NO2 detector
550,25 €
1
5W
S2096BU
BUTANE detector
591,50 €
1
5W
S2096GP
LPG detector
591,50 €
1
4W
S2096ME
METHANE detector
591,50 €
1
5W
S2096PR
PROPANE detector
591,50 €
1
5W
S2096VB
PETROL VAPOURS detector
591,50 €
1
5W
S2097BU
BUTANE detector
767,00 €
1
5W
S2097GP
LPG detector
767,00 €
1
5W
S2097ME
METHANE detector
767,00 €
1
5W
S2097PR
PROPANE detector
767,00 €
1
5W
S2097VB
PETROL VAPOURS detector
767,00 €
1
5W
S2130CO
CARBON MONOXIDE (CO) detector
862,00 €
1
5W
S2131CO
CARBON MONOXIDE (CO) detector
1.110,00 €
1
4W
S2133AM
AMMONIA (NH3) detector
1.532,50 €
1
4W
S2135AM
AMMONIA (NH3) detector
1.532,50 €
1
4W
S2137HS
HYDROGEN SULPHIDE (H2S) detector
1.212,50 €
1
4W
S2145NO
NITRIC OXIDE (NO)
1.850,00 €
1
4W
S2156BU
BUTANE detector
947,25 €
1
5W
S2156GP
LPG detector
947,25 €
1
5W
S2156ME
METHANE detector
947,25 €
1
5W
S2156PR
PROPANE detector
947,25 €
1
5W
S2156VB
PETROL VAPOURS detector
947,25 €
1
5W
S2157BU
BUTANE detector
1.162,50 €
1
5W
S2157GP
LPG detector
1.162,50 €
1
5W
S2157ME
METHANE detector
1.162,50 €
1
5W
S2157PR
PROPANE detector
1.162,50 €
1
5W
S2157VB
PETROL VAPOURS detector
1.162,50 €
1
5W
S2162CO
CARBON MONOXIDE (CO) detector
1.142,50 €
1
5W
S2396GP
LPG detector 4-20 mA
391,00 €
1
1W
S2396ME
METHANE detector 4-20 mA
391,00 €
1
1W
S2396VB
PETROL VAPOURS detector
391,00 €
1
4W
S2401CO2
CARBON DIOXIDE (CO2) detector
952,75 €
1
5W
S2601BU
BUTANE detector
1.212,50 €
1
5W
S2601PR
PROPANE detector
1.280,00 €
1
5W
S2602BU
BUTANE detector
1.695,00 €
1
5W
S2602PR
PROPANE detector
1.455,00 €
1
5W
S2623ME
METHANE detector (Old partnumber: S2653ME)
1.110,00 €
1
5W
S2624ME
METHANE detector (Old partnumber: S2654ME)
1.317,50 €
1
5W
S2625ME
METHANE detector (Old partnumber: S2601ME)
1.280,00 €
1
5W
S2626ME
METHANE detector (Old partnumber: S2602ME)
1.455,00 €
1
5W
S2640O2
OXYGEN (O2) detector
862,00 €
1
5W
S2641O2
OXYGEN (O2) detector
1.110,00 €
1
4W
S2642O2
OXYGEN (O2) detector
1.142,50 €
1
5W
S2653BU
BUTANE detector
1.110,00 €
1
5W
1
2
3
4
5
6
7
8
33
Price List Reference
34
Description
Packing Lead unit time
Price
S2653PR
PROPANE detector
1.110,00 €
1
5W
S2654BU
BUTANE detector
1.317,50 €
1
5W
S2654PR
PROPANE detector
1.317,50 €
1
5W
SL517
Stainless steel collector for sensor head type 3
48,25 €
1
5W
SL523
Stainless steel collector for sensor head type 2
72,25 €
1
5W
SL647
Stainless steel weather protection roof, wall mount type
531,75 €
1
5W
ST.G/8REL
Plug and play relay board
345,75 €
1
4W
ST.G/BOX
IP55 plastic box
69,15 €
1
4W
ST.G/IN8-S
8-input remote max 16 modules
412,00 €
1
6W
ST.G/OUT16-S
16-output remote 8 modules
412,00 €
1
4W
ST.G/SER++
Additional Serial board
165,25 €
1
4W
ST.MTS/S1
MULTISCAN++ S1 gas control panel
4.510,00 €
1
6W
ST.MTS/S1-128B
MULTISCAN++ S1 gas control panel, for up to 128 gas detectors, in IP65 ABS box
4.077,50 €
1
6W
ST.MTS/S1-256B
MULTISCAN++ S1 gas control panel, for up to 256 gas detectors
4.510,00 €
1
4W
ST.MTS/S1-64B
MULTISCAN++ S1 gas control panel, for up to 64 gas detectors, in IP65 ABS box
3.637,50 €
1
6W
ST.PL4/ESP
4 Channel extension card for STPL4+
488,25 €
1
6W
ST.S/CKD
Handheld calibration keypad
306,00 €
1
4W
ST.S/IDI
Plug-in RS485 interface
62,90 €
1
6W
ST.S3REL
3-Relay card
ST.SX/IDI+
Microprocessor based control panel
STGD/AD2
Adapter for type 2 sensor heads
67,65 €
1
4W
1.825,00 €
1
1W
74,10 €
1
5W
STGD/AD3
Adapter for type 3 sensor heads
74,10 €
1
5W
STPL4+
4 Zones 4-20mA gas panel
976,50 €
1
1W
VMB/267V40
Power supply 24 Vdc/4A
555,25 €
1
6W
Z-00780-A-0100
ATEX approved junction box (Explosion proof)
229,75 €
1
6W
Z-00780-A-0160
Right angle mounting bracket for ceiling mounting
113,75 €
1
6W
Z-02000-A-1635
Weatherproof CAP for flammable detector
150,75 €
1
6W
Z-02000-A-1640
Weatherproof CAP for toxic/oxygen detector
173,00 €
1
6W
Z-02000-A-1642
Collecting cone for flammable detector
160,75 €
1
6W
Z-2106B1100
Signalpoint 0-100% LEL comb. sensor (mV output)
515,50 €
1
6W
Z-2106B1300
Signalpoint H2S 0-20 ppm toxic sensor (mA output)
771,00 €
1
5W
Z-2106B1301
Signalpoint H2S 0-50 ppm toxic sensor (mA output)
771,00 €
1
6W
Z-2106B1302
Signalpoint H2S 0-100 ppm toxic sensor (mA output)
771,00 €
1
6W
Z-2106B1305
Signalpoint CO 0-100 ppm toxic sensor (mA output)
771,00 €
1
6W
Z-2106B1306
Signalpoint CO 0-200 ppm toxic sensor (mA output)
771,00 €
1
5W
Z-2106B1307
Signalpoint CO 0-500 ppm toxic sensor (mA output)
771,00 €
1
6W
Z-2106B1310
Signalpoint Cl2 0-5 ppm toxic sensor (mA output)
1.027,50 €
1
6W
Z-2106B1311
Signalpoint Cl2 0-15ppm toxic sensor (mA output)
1.027,50 €
1
5W
Z-2106B1313
Signalpoint NH3 0-50 ppm toxic sensor (mA output)
1.160,00 €
1
5W
Z-2106B1314
Signalpoint NH3 0-1000ppm toxic sensor (mA output)
1.160,00 €
1
5W
Z-2106B1316
Signalpoint O2 0-25%VOL toxic sensor (mA output)
771,00 €
1
6W
Z-2306B1000
Unipoint controller mA input version
795,00 €
1
6W
Z-2306B2000
Unipoint controller mV input version
795,00 €
1
6W
ZM/TEST/2
Water protection/test adapter for sensor head type 2
85,80 €
1
5W
ZM/TEST/3
Water protection/test adapter for sensor head type 3
108,50 €
1
5W
Z-S3KCAL
Calibration cup
146,75 €
1
5W
Honeywell | Fire Safety
Benelux region
Price list version 2016_V1.2
Price List Reference
Description
Packing Lead unit time
Price
Z-SPSTAXA1
0-50 ppm Ammonia (NH3) detector (mA output)
1.187,50 €
1
6W
Z-SPSTAXA2
0-1000 ppm Ammonia (NH3) detector (mA output)
1.315,00 €
1
6W
Z-SPSTAXC2
0-500 ppm Carbon Monoxide (CO) detector (mA output)
1.055,00 €
1
6W
Z-SPSTAXF1
0-100% LEL Methane detector (mV output)
662,75 €
1
6W
Z-SPSTAXO1
0-25% VOL Oxygen (O2) detector (mA output)
921,25 €
1
6W
Z-SPXCD MTBR
Mounting bracket (inc. bolts, nuts, brackets)
146,75 €
1
5W
Z-SPXCDALMB1
ATEX/IECEX & AP approved SP XCD Carbon Dioxide IR 0-2.00%VOL
2.410,00 €
1
5W
Z-SPXCDALMCX
SP XCD Carbon Monoxide 0-500ppm
2.290,00 €
1
5W
Z-SPXCDALMFX
Sensepoint XCD Flammable CAT 0-100% LEL
1.927,50 €
1
4W
Z-SPXCDALMG1
SP XCD Hydrogen 0-1000ppm
2.290,00 €
1
5W
Z-SPXCDALMHX
SP XCD Hydrogen Sulfide 0-50ppm
2.290,00 €
1
5W
Z-SPXCDALMO1
SP XCD Oxygen 25.0%/Vol
2.290,00 €
1
5W
Z-SPXCDALMRX
SP XCD CH4(Methane) IR 0-100% LEL
2.410,00 €
1
4W
Z-SPXCDASMB1
ATEX/IECEX & AP approved SP XCD Carbon Dioxide IR 0-2.00%VO
2.890,00 €
1
5W
Z-SPXCDASMCX
SP XCD Carbon Monoxide 0-500ppm
2.770,00 €
1
5W
Z-SPXCDASMCX
SP XCD Carbon Monoxide 0-500 ppm
2.770,00 €
1
6W
Z-SPXCDASMFX
Sensepoint XCD Flammable CAT 0-100%LEL
2.410,00 €
1
5W
Z-SPXCDASMG1
SP XCD Hydrogen 0-1000ppm
2.770,00 €
1
5W
Z-SPXCDASMHX
SP XCD Hydrogen Sulfide 0-50ppm
2.770,00 €
1
5W
Z-SPXCDASMO1
SP XCD Oxygen 25.0%/Vol
2.770,00 €
1
5W
Z-SPXCDASMRX
SP XCD CH4(Methane) IR 0-100%LEL
2.890,00 €
1
5W
Z-SPXCDCC
Collecting cone for use with lighter than air gases
146,75 €
1
5W
Z-SPXCDDMK
Duct mounting kit
394,00 €
1
5W
Z-SPXCDSDP
Sunshade / Deluge Protection
581,75 €
1
5W
Z-ZDINPSUX1
DIN rail mounted power supply 24Vdc - 1A
201,25 €
1
6W
1
2
3
4
5
6
7
8
Spare parts for Gas Detection Systems Z-2106B1130
Signalpoint 0-100% LEL FLAM. REPLACEMENT LID
443,75 €
1
6W
Z-2106B1545
Signalpoint O2 ELECTROCHEMICAL CELL
588,50 €
1
6W
Z-2106B1548
Signalpoint CO ELECTROCHEMICAL CELL
684,00 €
1
6W
Z-2106B1549
Signalpoint H2S ELECTROCHEMICAL CELL
588,50 €
1
6W
Z-2106B1596
Signalpoint 0-50PPM NH3 ELECTROCHEMICAL CELL
929,25 €
1
6W
Z-2306B3010
UNIPOINT TERMINAL BLOK (2x)
42,60 €
1
6W
Z-2306B3020
UNIPOINT DIN RAIL SOCKET
42,60 €
1
6W
Z-2306B3030
UNIPOINT POWER CONNECTOR
42,60 €
1
6W
Z-SPPPMTS
TP1 and TP4 TERMINAL SCREW AND ‘U’ CLAMP (BAG OF 20)
80,40 €
1
6W
Z-SPSTAXA1SS
Sensepoint NH3 0-50PPM ELECTROCHEMICAL CELL
900,00 €
1
6W
Z-SPSTAXA2SS
Sensepoint NH3 0-1000PPM ELECTROCHEMICAL CELL
1.017,50 €
1
6W
Z-SPSTAXC2SS
Sensepoint CO ELECTROCHEMICAL CELL
789,50 €
1
6W
Z-SPSTAXF1SS
Sensepoint 0-100% LEL FLAM. REPLACEMENT LID
452,25 €
1
6W
Z-SPSTAXO1SS
Sensepoint O2 ELECTROCHEMICAL CELL
793,75 €
1
6W
Z-TP1IDC
TP1 IDC LEAD (DISPLAY TO INPUT MODULE)
158,75 €
1
6W
Z-TP1MADM
TP1 REPLACEMENT mA DISPLAY MODULE
771,00 €
1
4W
Z-TP1MAIM
TP1 REPLACEMENT mA INPUT MODULE
771,00 €
1
6W
Z-TP1MAN
TP1 INSTRUCTION MANUAL
OBSOLETE
1
35
Price List
36
Packing Lead unit time
Reference
Description
Z-TP1MVDM
TP1 REPLACEMENT mV DISPLAY MODULE
771,00 €
1
6W
Z-TP1MVIM
TP1 REPLACEMENT mV INPUT MODULE
771,00 €
1
6W
Z-TP1WMB
TP1 WALL MOUNTING BRACKET
115,50 €
1
6W
Z-TP4CMDM
TP4 REPLACEMENT DISPLAY MODULE FOR COMMON MODULE
919,25 €
1
6W
Z-TP4CMIM
TP4 REPLACEMENT INPUT MODULE FOR COMMON MODULE
1.147,50 €
1
6W
Z-TP4IDC
TP4 IDC LEAD (DISPLAY TO INPUT MODULE)
18,20 €
1
6W
Z-TP4INT
TP4 INTERCONNECT CABLE (INPUT MODULE TO INPUT MODULE)
18,20 €
1
6W
Z-TP4MADM
TP4 REPLACEMENT mA DISPLAY MODULE
675,00 €
1
6W
Z-TP4MAIM
TP4 REPLACEMENT mA INPUT MODULE
503,75 €
1
6W
Z-TP4MAN
TP4 INSTRUCTION MANUAL
OBSOLETE
1
Z-TP4MVDM
TP4 REPLACEMENT mV DISPLAY MODULE
675,00 €
1
6W
Z-TP4MVIM
TP4 REPLACEMENT mV INPUT MODULE
500,50 €
1
6W
Z-TP4WMB
TP4 WALL MOUNTING BRACKET
166,25 €
1
6W
Honeywell | Fire Safety
Benelux region
Price
Price list version 2016_V1.2
Price List Reference
Description
Packing Lead unit time
Price
6. Accessories 960115
Keeper plate - 75m diam. for 1372N
28,50 €
1
4W
960119
Wall mounted 24Vdc Door Holder - 850N (Incl. keeper plate 960114)
69,50 €
1
1W
960120
Wall mounted 24Vdc Door Holder - 400N (Incl. keeper plate 960110)
44,50 €
1
1W
960121
Wall/floor mounted 24Vdc Door Holder, 400N, Swivel head 1517,5cm (Incl. keeper plate 960110)
81,50 €
1
1W
960122
Wall/floor mounted 24Vdc Door Holder, 400N, Swivel head 3032,5cm (Incl. keeper plate 960110)
89,50 €
1
1W
960124
Wall mounted 24Vdc Door Holder - 400N (Incl. keeper plate 960110)
48,50 €
1
1W
960126
Wall mounted 24Vdc Door Holder - 1372N (without keeper plate)
99,50 €
1
1W
960127
Wall mounted Bracket - 15cm, 0,65kg
45,25 €
1
1W
52,50 €
1
1W
9,80 €
1
3W
11,70 €
1
2W
960128
Wall mounted Bracket - 30cm, 1kg
/BS
Break seal conversion (To be ordered along with the stopper)
/L
Frangible lock
20/20-190
Collimator for 20/20 simulators
965,00 €
1
4W
20/20-310
Fire simulator for triple IR flame detectors *
9.435,00 €
1
4W
20/20-311
Fire simulator for UV/IR flame detectors
9.435,00 €
1
5W
20/20-312
Fire simulator for single IR flame detectors
8.610,00 €
1
5W
20/20-313
Fire simulator for hydrogen flame detectors
9.440,00 €
1
5W
2x1,5-LH-500
Twisted-shielded cable 2 wires 1,5mm²
768,50 €
500
1W
2x1,5-LHR-500
Twisted-shielded cable 2 wires 1,5mm² Fire resistant
1.425,00 €
500
1W
2x2,5-LH-500
Twisted-shielded cable 2 wires 2,5mm²
1.235,00 €
500
8W
2x2,5-LHR-500
Twisted-shielded cable 2 wires 2,5mm² Fire resistant
2.037,50 €
500
8W
AES 24V 3A C24 SB G Power supply unit 24V - 3A
728,00 €
1
1W
AES 24V 3A C38 SB G Power supply unit 24V - 3A
786,25 €
1
1W
AES 24V 4A C38 SB G Power supply unit 24V - 4A
948,00 €
1
1W
AES 24V 6A C38 SB G Power supply unit 24V - 6A
1.260,00 €
1
1W
AES 24V 8A C85 SB G Power supply unit 24V - 8A
1.577,50 €
1
1W
BF362-1
PSU24V-1,5A with charger
498,00 €
1
2W
BF362-5
PSU24V-5A With charger
637,75 €
1
2W
CG2
Nylon cable gland for IP55 AND IP67 call point
2,90 €
1
4W
CKS002
Break seal conversion kit (1 retainer; 2 break seals; instructions. Old partnumber: /BS)
9,50 €
1
2W
CSR485-100
Twisted-shielded cable 2 wires 1mm² - 100m
161,00 €
100
1W
CSR485-500
Twisted-shielded cable 2 wires 1mm² - 500m
854,25 €
500
8W
ECO1000 DRT
Detector removal tool for ECO1000 detectors
39,95 €
1
3W 1W
ECO1000 RTU
Remote laser test unit
FR-1000-020
Protective Cage (F50R/F100R) (Replaced by STI 9624
47,60 €
1
OBSOLETE
1
FS-1100
Tester for flame detectors
8.640,00 €
1
4W
HLSPS25 HLSPS50
Power supply unit 24VDC - 3A (2 x 1,1A)
404,00 €
1
1W
Power supply unit 24 VDC - 5A (2 x 2,2A)
529,00 €
1
1W
HSI-1490-1
18” Fiberglass delivery tube for HSI-25E
90,00 €
1
1W
HSI-25E
Smoke detector tester
225,00 €
12
1W
1
2
3
4
5
6
7
8
* Did you know that HLS also offers the possibility to rent this item? See § Practical information 5. Rental of specialized test tools
37
Price List Reference
38
Description
Packing Lead unit time
Price
M02-04-00
Test magnet
10,95 €
1
3W
MA05/D/2
Surge protection module 220V - up to 5A
211,50 €
1
8W
MA10/D/2
Surge protection module 220V - up to 10A
148,75 €
1
8W
MA15/D/2/SI
Surge protection module 220V - up to 15A
174,50 €
1
8W
NP12-12
12Ah - 12V Valve Regulated Lead Acid Battery
63,05 €
1
4W
NP12-6
12Ah - 6V Valve Regulated Lead Acid Battery
38,25 €
1
4W
NP17-12
17Ah -12V Valve Regulated Lead Acid Battery
91,85 €
1
4W
NP2.3-12
2,3Ah - 12V Valve Regulated Lead Acid Battery
25,95 €
1
4W
NP24-12
24Ah - 12V Valve Regulated Lead Acid Battery
136,25 €
1
4W
NP38-12
38Ah - 12V Valve Regulated Lead Acid Battery
212,25 €
1
4W
NP65-12
65Ah - 12V Valve Regulated Lead Acid Battery
368,50 €
1
4W
NP7-12
7Ah - 12V Valve Regulated Lead Acid Battery
36,40 €
1
4W
OSID-WG
Wire guard for OSID Imager and Emitter
104,50 €
1
4W
PC.VALVOLA
Flow-meter valve
133,25 €
1
3W 1W
POL-100
Polling tool
POL-100-ACC
Accessory belt for POL-100
PTL611
Portable Test lamp for RIV IR flame detector
1.635,00 €
1
OBSOLETE
1
1.427,50 €
1
4W
RB012AHB
1,2 Ah 12V sealed lead acid battery
12,70 €
1
1W
RB022AHB
2,2 Ah 12V sealed lead acid battery
19,05 €
1
1W
RB040AHB
4.5 Ah 12V sealed lead acid battery
20,30 €
1
1W
RB070AHB
7.2 Ah 12V sealed lead acid battery
24,20 €
1
1W
RB120AHB
12 Ah 12V sealed lead acid battery
46,80 €
1
1W
RB180AHB
18 Ah 12V sealed lead acid battery
63,30 €
1
1W
RB260AHB
26 Ah 12V sealed lead acid battery
95,25 €
1
1W
RB450AHB
45Ah / 12V sealed lead acid battery
211,50 €
1
1W
RB650AHB
65 Ah 12V sealed lead acid battery
234,75 €
1
1W
SC083
Breakable cover seal for MCP (Pack of 50; Old partnumber: P056)
34,60 €
50
4W
SCORP 1001-001
Scorpion Point Detector Head Unit Kit
578,00 €
1
3W
SCORP 2001-001
Scorpion ASD Head Unit Kit
578,00 €
1
3W
SCORP 25-001
Scorpion access point
175,50 €
1
4W
SCORP 50-001
Scorpion battery pack, NiMH rechargeable nominal 7.2V/2.2Ah
279,25 €
1
3W
SCORP 60-001
Scorpion battery cable, for connecting SOLO 760 battery batton to
105,50 €
1
3W
SCORP 7000-001
Scorpion portable controller
1.220,00 €
1
4W
SCORP 8000-001
Scorpion Control Panel (Incl. mounting box)
1.085,00 €
1
3W
SDT150-12
Smoke detector testers
193,50 €
12
1W
SDT150-S-12
Smoke Sabre
183,00 €
12
1W
SDT250-12
Smoke detector testers
301,50 €
12
1W
SG.B/XXX
Disposable gas cylinders
509,00 €
1
4W
SG-DRT
Detector head removal tools
262,25 €
1
4W
SGSK100
Test kit for sagittarius wireless system
2.107,50 €
1
4W
SI.B/XXX
Disposable gas cylinders
129,00 €
1
4W
SOLO 100
Fiberglas 4 section telescopic pole - 4,5m
538,00 €
1
1W
SOLO 101
Fiberglas extension pole - 1,13m
113,25 €
1
1W
SOLO 108
Fiberglas 2 section telescopic pole - 2,5m
268,75 €
1
1W
SOLO 200
Universal detector removal tool
344,00 €
1
1W
SOLO 330
Aerosol smoke dispenser
264,25 €
1
1W
Honeywell | Fire Safety
Benelux region
Price list version 2016_V1.2
Price List Packing Lead unit time
Reference
Description
Price
SOLO 424
Heat detector tester 220V-240V
610,00 €
1
1W
SOLO 461
Cordless heat detector tester set
1.005,00 €
1
4W
SOLO 610
Protective carrying storage bags
201,75 €
1
1W
SOLO 713-001
Adapter tool 713
244,75 €
1
1W
SOLO 726-101
Solo battery batton, NiMH rechargeable nominal 7.2V/2.2Ah
188,25 €
1
3W
SOLO 808
Smoke detector test starter pack 4 metres
516,00 €
1
1W
SOLO 809
Smoke detector test starter pack 6 metres
779,00 €
1
1W
SOLO 810
Smoke detector test starter pack 2,5 metres
366,00 €
1
1W
SOLO 811
Smoke detector test & removal set 6 metres
1.290,00 €
1
4W
SOLO 814
Smoke & mains heat detector test set 6 metres
1.775,00 €
1
4W
SOLO 822
Smoke & cordless heat detector test set 6 metres
2.150,00 €
1
4W
SOLO A7
Detector duster
375,25 €
12
4W
STI 6530/n
Stopper flush mounted without sounder
66,25 €
1
2W
STI 6531/n
Stopper surface mounted without sounder
88,75 €
1
2W
STI 6532/n
Stopper flush mounted with sounder
145,00 €
1
2W
STI 6533/n
Stopper surface mounted with sounder
163,50 €
1
2W
STI 6534/n
Weather stopper flush mounted without sounder
89,65 €
1
2W
STI 6535/n
Weather stopper surface mounted without sounder
103,00 €
1
2W
STI 9601
Low profile, flush mounting 70 (h) x 210 (Ø) mm
51,65 €
1
1W
STI 9602
Low profile, surface mounting 108 (h) x 210 (Ø) mm
57,00 €
1
1W
STI 9604
Low profile, flush mounting 80 (h) x 175 (Ø) mm
51,65 €
1
1W
STI 9605
Low profile, surface mounting 115 (h) x 175 (Ø) mm
57,00 €
1
1W
STI 9606
Low profile, flush mounting 95 (h) x 175 (Ø) mm
51,65 €
1
1W
STI 9609
High profile, flush mounting 114 (h) x 210 (Ø) mm
53,15 €
1
1W
STI 9610
High profile, surface mounting 145 (h) x 210 (Ø)
58,75 €
1
1W
STI 9617
Protective cover for addressable audio & visual devices
51,00 €
1
1W
STI 9621
Protective cover for NS/NX series audio & visual devices
54,50 €
1
1W
STI 9624
Detector guard 225 (h) x 140 (w) x 120 (d) mm
53,55 €
1
2W
STI 9625
Beam detector guard for 6424E
STI 9640
Exit light guard
114,50 €
1
2W
80,60 €
1
1W
STI 9641
Exit light guard
91,05 €
1
1W
STI 9645
Exit light guard
128,50 €
1
1W
STI 9649
Exit light guard
325,75 €
1
1W
STI 9706
Beam detector guard for 6500/ LPB-700
61,10 €
1
1W
STI 9707
Surface mounted beam detector guard for 6500/ LPB-700
64,55 €
1
1W
STI 9840
Protective Cage (F5000 detector) (Old partnumber: FR-5000018)
73,05 €
1
3W
STI 9841
Protective Cage (F5000 controller) (Old partnumber: FR-5000019)
96,55 €
1
3W
STI/BS
Breakable seals (pack of 10)
TC3-3PACK-001
Replacement CO capsule
19,00 €
10
2W
227,00 €
3
1W
TESTIFIRE 1001-001 Testifire 1001-001 smoke/heat kit
1.962,50 €
1
1W
TESTIFIRE 2001-001 Testifire 2001-001 smoke/heat/CO kit
2.415,00 €
1
1W
192,00 €
1
4W
TESTIFIRE 6001-001 Testifire 6001-001 smoke/heat kit 6 metres
2.822,50 €
1
1W
TESTIFIRE 6201-001 Testifire 6201-001 smoke/heat/CO kit 6 metres
3.332,50 €
1
1W
TESTIFIRE 9001-001 Testifire 9001-001 smoke/heat kit 9 metres
3.215,00 €
1
1W
TESTIFIRE 9201-001 Testifire 9201-001 smoke/heat/CO kit 9 metres
3.552,50 €
1
1W
TESTIFIRE 25
IR controller for Testifire
1
2
3
4
5
6
7
8
39
Price List Packing Lead unit time
Reference
Description
Price
TS3-001
Replacement smoke capsule
446,25 €
6
1W
TS3-3PACK-001
Replacement smoke capsule
225,75 €
3
1W
VTX+XA
Calibration gas case
584,75 €
1
3W
Z-02000-A1645
Calibration gas flow housing for signalpoint & sensepoint
158,25 €
1
6W
Z-2302D0765
Case for up to 2x2 alu. gas cylinders, regulator, tubing
186,50 €
1
6W
ZB24518
Surge protection module for RS485 interface
179,75 €
1
1W
ZB24544
Surge protection module for 24V loop (use 1/loop)
216,75 €
1
1W
ZB24578
Surge protection module for sounder output
222,50 €
1
1W
Z-CAL-CO
Gas detector calibration kit - CO gas detectors
1.025,00 €
1
4W
Z-CAL-COM
Gas detector calibration kit - combustible detectors
991,75 €
1
6W
Z-GasCH4-22-AIR-34
2,2%Vol. Methane in air (EU=50% LEL, US=44% LEL)
277,50 €
1
1W
Z-GASCO-100-AIR-34
100 ppm Carbon monoxide in air
277,50 €
1
6W
Z-GasCO-250-AIR-34 250 ppm Carbon monoxide in air
323,75 €
1
6W
Z-GASH2S-10-AIR-34 10 ppm H2S in air
286,00 €
1
6W
Z-GasNH3-25-AIR-34
658,25 €
1
6W
658,25 €
1
6W
OBSOLETE
1
25 ppm Ammonia in air
Z-GASNH3-300-AIR-34 300 ppm Ammonia in air Z-GasO2-209-N2-34 20,9%Vol Oxygen in N2 (compressed air) ZMCAP/123
Adapter
193,50 €
1
4W
Z-REG-0.30
Pre-set 0,3l/m flow regulator (Old partnumber: Z-ZCALREG1)
288,50 €
1
6W
Z-SPPPCAL
Calibration cup for sensepoint pro & plus
Z-SPPPTUB
1m tygon tubing (suitable for all gases)
OBSOLETE
1
44,60 €
1
6W
Spare parts for Accessories
40
960110
Keeper plate - 55m diam. for 400N
12,50 €
1
4W
960114
Keeper plate - 65m diam. for 850N
20,50 €
1
4W
MOD45R
Replacement cord for MOD400R
100,00 €
1
3W
SOLO 460-001
Cordless heat detector head unit only
990,00 €
1
4W
SOLO 760-001
Nimh battery baton
139,75 €
1
1W
SPARE 1002
Pair of transparent grips for Solo 200
15,50 €
1
4W
SPARE 1005
Silicone membrane for Solo300
22,60 €
1
1W
SPARE 1028
Aerosol retaining cup
49,45 €
1
1W
SPARE 1049
Membrane ring for testifire
51,80 €
1
4W
Honeywell | Fire Safety
Benelux region
Price list version 2016_V1.2
General Sales Conditions
General Sales Conditions
42
Honeywell | Fire Safety
Benelux region
Price list version 2016_V1.2
General Sales Conditions Terms and Conditions of Sale Except as agreed in writing, the following terms and conditions apply to all deliveries (such as goods, software etc.) (“Goods”) and ancillary services by Honeywell Life Safety SA (hereinafter “Honeywell”) to the company placing the purchase order for such Goods (“Buyer”). Inconsistent Buyer terms and conditions are not binding on Honeywell, even if Honeywell does not expressly reject them. § 1 Offer 1.1 Offers made by Honeywell are not binding on Honeywell until Buyer places a purchase order which Honeywell confirms is accepted. 1.2 The Goods to be delivered and services to be provided are determined exclusively on the basis of Honeywell´s written quotation and order confirmation. Information in any quotations and in attached drawings and illustrations about the Goods, their measurements and weights are only approximate unless they are expressly stated as being binding. Honeywell reserves the right to make changes to any Goods prior to the date of delivery provided that the changes do not affect the form, fit or function of the Goods. §2 Delivery and Cancellation Conditions 2.1 Unless otherwise agreed in writing with Buyer, delivery terms for Goods are EX-WORKS (EXW acc. INCOTERMS 2010) Honeywell’s location. All risk of loss or damage to goods passes to Buyer upon delivery, or if earlier when Buyer has been notified of readiness for delivery. At Buyer’s request, Honeywell will arrange shipping to Buyer’s requested destination using Buyer’s nominated carrier but Honeywell will not accept any liability for loss or damage during shipping and any claim against the carrier must be made by Buyer in its own name and on its own behalf we will arrange shipping but using our shippers. Honeywell will add its charges for packaging, transport and insurance to its prices referred to in 3.1. 2.2 Title to the Goods shall pass to Buyer when it has paid the full price for the goods, and until such time as full payment is made, Buyer shall comprehensively insure the goods for the benefit of Honeywell, keep them free from all charges and security interest and give appropriate notice of reservation of ownership to third parties. 2.3 Honeywell may make deliveries under any order in one or more shipments, unless otherwise expressly agreed with Buyer and may issue separate invoices for each delivery. Unless otherwise expressly agreed in writing, all delivery dates and delivery periods are estimates. Honeywell will have no obligation to deliver on any delivery date but will use reasonable endeavours to do so provided that Buyer has provided all required documentation and information and any required authorizations and approvals. Honeywell will notify Buyer if it is unable to comply with an agreed delivery date, and specify the date on which it will make delivery. If Honeywell is unable to deliver on the new date, Buyer shall be entitled to terminate its purchase order, but Honeywell shall have no further liability for late delivery. 2.4 Buyer may not terminate or cancel a purchase order without Honeywell´s prior written consent. If Honeywell consents to any such cancellation or terminates any order in accordance with these terms and conditions, Purchaser is liable for termination charges, which may include (i) a price adjustment based on the quantity of Goods delivered, (ii) all costs, direct and indirect, incurred and committed for Buyer’s terminated purchase order, (iii) the full cost of all unique materials required for custom goods, and (iv) a pro-rata compensation covering the pro-rated expenses and anticipated profits consistent with industry standards. The termination charges shall be the higher of the costs referred to in the previous sentence and the amount due to Honeywell under Article 1382 Civ.Code which is 40% of the cost of supply. 2.5 Honeywell may unilaterally terminate a purchase order in whole or in part upon Buyer’s breach of these terms and conditions or Buyer’s bankruptcy, insolvency, dissolution, or receivership proceedings without any further liability. 2.6 Buyer shall examine Goods delivered without delay upon arrival for quantity, nature and warranted qualities, and notify Honeywell of obvious defects within 8 days of receipt (and in any event within 15 days of the date of delivery) by written notice indicating the article, invoice number, invoice date and nature of the defect. Honeywell shall be notified of hidden defects within 3 working days of discovery by means of written notice indicating the article and nature of the defect. If Buyer fails to do so the Goods are deemed to be accepted by Buyer. All such notifications shall be made to Honeywell’s address at Liege Airport Business Park B50, 4460, Grace Hollogne, Belgium. 2.7 If Honeywell agrees to a request by Buyer to return any Goods after delivery, Buyer must return them in their original packed and sealed condition within six months after shipment. Software, customized products and products in opened packaging, lacquered und non-reusable parts cannot be returned. Goods can only be returned with an authorization number (RMA) obtained from Honeywell in advance of shipment to Honeywell. The RMA is specific to the Goods and quantity to be returned and may not be used to return any other Goods. If Honeywell agrees to the return of any Goods, Honeywell will give Buyer a credit equal to the amount of the purchase price paid less a deduction of 15% if Buyer submits an order for an equivalent value of Goods and/or services at the time that it requests the return of the Goods, and less a reduction of 25% if Buyer does not submit such an order, in each case for processing, testing, administration and other overheads. The deduction is not applicable if the Goods are returned due to a default by Honeywell. §3 Prices, Payment and Retention of Title 3.1 All prices for Goods are valid for delivery ex works (EXW acc. INCOTERMS 2010) the location specified in Honeywell’s quotation or order confirmation. The prices agreed in Honeywell’s order confirmation are binding until expiry of the agreed delivery period provided that Goods are to be delivered within 3 months of the order confirmation date. If delivery is scheduled for a later date, the prices and incidental costs applicable on the date of delivery shall apply. If the prices specified on any purchase order deviate from the quotation made by Honeywell, or Honeywell’s current price list if no quotation is made, Honeywell will adjust the prices accordingly in its order confirmation. 3.2 Unless otherwise quoted in writing to Buyer, all charges for services will be in accordance with Honeywell’s price list for the relevant services applicable at the date of order confirmation. Prices are exclusive of additional expenses notified in advance to Buyer, such as for travel to site and working outside normal business hours.
1 2 3 4 5 6 7 8
43
General Sales Conditions 3.3 All prices are exclusive of (i) sales and other taxes applicable on the date of invoicing which will be added to all prices and identified on each invoice (unless Buyer has provided Honeywell with exemption certificates acceptable to the taxing authorities) and (ii) the costs of recycling Goods covered by the European WEEE Directive 2002/96/EC and such costs may be added to the prices quoted. 3.4 Unless otherwise expressly agreed in writing, all payments are to be in EURO and are due in Honeywell´s account within 30 days from date of invoice. Buyer shall pay the invoiced amount without discount or set-off of any claim unless Honeywell has expressly agreed in writing to such set-off. 3.5 Buyer shall pay all bank charges in connection with any payment. Checks and/or bills of exchange will only be accepted with Honeywell’s prior agreement in writing and all expenses in relation to them, including any collection and discount charges, shall be paid by Buyer. Checks and/or bills of exchange are deemed as payment only when they have been cashed in and the money deposited in Honeywell’s bank account. 3.6 An invoice is deemed to be paid on the day on which Honeywell receives payment in its bank account. Invoices remaining unpaid after their due date will automatically and without prior notice as from their due date be subject to (i) an interest charge for late payment equal to the interest rate determined by the 1st paragraph of article 5 of the Law of 2 August 2002 on the fight against late payments as communicated by the Minster of Financial Affairs through a notice in the Official Belgian State Gazette and (ii) liquidated damages of 15 % of the outstanding amount. Buyer shall pay all Honeywell’s expenses incurred in collecting payments due, including attorney´s fees if any. If Buyer is in arrears with a due payment (i) all amounts due from Buyer to Honeywell shall become immediately payable and all credit arrangements shall immediately cease, (ii) all future deliveries shall be immediately suspended, (iii) if the order in respect of which payment is late is for deliveries in installments Honeywell has the right to suspend fulfillment of the order, and (iv) Honeywell shall be released from all obligations under applicable product warranties until the amounts due are paid. In accordance with section 2.2, Honeywell shall retain title in all Goods delivered until payment has been made in full. § 4 Infringement Indemnification 4.1 Honeywell agrees to i) defend or settle any claim, suit, or proceeding brought against Buyer based solely upon a claim that any Goods manufactured by Honeywell hereunder directly infringe any third party European Union patent, copyright, or maskwork, and (ii) to pay costs and damages finally awarded to the third party, provided that: i) Honeywell is notified promptly in writing of such claim, ii) Honeywell is provided sole control of such defense or settlement using counsel of Honeywell´s choice, and ii) Buyer provides Honeywell with all available information and assistance. Because Honeywell has exclusive control over resolving infringement claims hereunder, in no event will Honeywell be liable for Buyer’s attorneys’ fees, if any. 4.2 Honeywell shall not be responsible for any settlement or compromise of any such third party claim made without Honeywell´s written consent. Honeywell has no obligation in respect of, and this section will not apply to, any claim of infringement of any third party’s intellectual property right i) by Goods not manufactured by Honeywell or Goods developed pursuant to Buyer’s direction, design, process, or specification, (ii) by the combination of any Goods with other elements if such infringement could have been avoided but for such combination, (iii) by Goods that have been modified if such infringement would have been avoided by the unmodified Goods, (iv) by Goods not used for their ordinary purpose, or (v) by software if such software is other than the latest version of the software released by Honeywell and provided to Buyer. Buyer agrees to defend, indemnify, and hold harmless Honeywell from and against any claims, suits, or proceedings whatsoever arising from such exclusions identified in this section, unless this is not caused by Buyer’s failure. 4.3 At any time after a claim has been made or Honeywell believes is likely to be made, or a court of competent jurisdiction enters an injunction from which no appeal can be taken, Honeywell has at its option the discretion to i) procure for Buyer the right to continue using such Goods, (ii) replace or modify such Goods in a way that they do not further infringe any third party intellectual property rights and without affecting the functionality of said Goods. In the event Honeywell fails to do so within a reasonable time, Honeywell shall accept the return of such Goods and refund the purchase price less 20% annual depreciation from shipment date. 4.4 The foregoing states Buyer’s exclusive remedy for any actual or alleged infringement of intellectual property rights. § 5 Software 5.1 The use of software, if provided separately or installed on a Good supplied, is governed by the following terms unless a software license agreement is included with such software. 5.2 Subject to Buyer’s compliance with these terms and conditions, Honeywell grants to Buyer a personal, limited, nonexclusive license to use the object code of the software solely for Buyer’s internal purposes. The license is limited to such kinds of Goods as are specified on Buyer’s purchase order, or Honeywell’s quotation or confirmation of acceptance. No other use is permitted. 5.3 Buyer shall not attempt any transfer without prior written consent of Honeywell, sublicense, or redistribution of the software except as expressly permitted herein. Notwithstanding the foregoing, if the software is delivered with a Good, Buyer may transfer its license of the software to a third party in conjunction with the sale by Buyer of the Good on which the software is installed. Buyer is entitled to copy the software and make back-up copies to the extent necessary for the contractual purpose. Buyer shall not disclose, distribute, or display any such software, or otherwise make it available to others (except as Honeywell authorizes in writing) or allow any unauthorized use of the software. Buyer is only entitled to reverse compile the software, to modify, upgrade or alter the software in any other way within the scope of applicable mandatory statutory intellectual property rights. 5.4 Honeywell may terminate this license if Buyer breaches these terms and conditions. 5.5 Honeywell retains for itself (or, if applicable, its suppliers) all title and ownership to any software delivered hereunder, all of which contains confidential and proprietary information and which ownership includes, without limitation, all rights in patents, copyrights, trademarks, and trade secrets.
44
Honeywell | Fire Safety
Benelux region
Price list version 2016_V1.2
General Sales Conditions §6 Warranty 6.1 Goods (excluding software): Unless otherwise stated in Honeywell’s warranty policy from time to time, Honeywell warrants all Goods will materially comply with Honeywell’s published specifications or with Honeywell’s specifications generated specifically for the relevant purchase order for 12 months from delivery. Goods manufactured by companies outside of the Honeywell group are warranted in accordance with the published warranty of the relevant manufacturer to the extent that Honeywell has the right to such warranty. No Goods will be accepted for return without an RMA obtained in advance of shipment to Honeywell. Non-complying Goods must be returned transportation prepaid to Honeywell and Honeywell will repair or replace them, at Honeywell’s option, and return ship them lowest cost, transportation pre-paid. Items subject to contamination through usage shall not be deemed defective because of contamination. Repaired, replaced or recalibrated Goods are warranted for the remainder of the unused warranty term or for 90 days from the date of delivery, whichever is the longer. In emergency conditions, Honeywell will ship replacement parts to Buyer before receiving from Buyer those parts to be replaced. If Honeywell does not receive those parts transportation prepaid within 30 days after shipment of the replacement parts, Buyer shall pay Honeywell’s then current list price for the replacement parts. 6.2 Software: Buyer shall ensure that the latest available software version is installed in the Goods and in this section 6.2 this version is referred to as the “Licensed Software”. Honeywell’s warranties only apply to Goods in which the latest version of the Licensed Software has been installed. Licensed Software will materially comply with Honeywell’s published user documentation, or with Honeywell’s designs or specifications generated specifically for Buyer and agreed to in writing by the parties (“Specifications”), for 90 days from delivery to Buyer. If Buyer notifies Honeywell of materially non-complying Licensed Software and provides a description allowing the error to be repeated, Honeywell will, at Honeywell’s option, either (i) provide Buyer with a correction or replacement Licensed Software, or (ii) make instructions available to Buyer to modify the Licensed Software. Third party supplier warranties shall apply to the extent that they are less than the warranties described in these terms and conditions (or Honeywell’s published warranty policy). Honeywell warrants that the Licensed Software was scanned for viruses known to Honeywell prior to delivery to Buyer. Because viruses could be introduced to the Licensed Software after delivery, Honeywell recommends that Buyer regularly scans the Licensed Software with updated virus scanning software. 6.3 Services: If Honeywell provides any services to Buyer, including but not limited to training or assistance with configuration and installation of the Goods, Honeywell will provide such services in a workmanlike manner, in accordance with generally accepted standard industry practice. Any services performed that do not conform to such standard will, upon written notice from Buyer, be corrected by Honeywell, provided that such notice is received by Honeywell within 30 days of the date the service was performed. Unless otherwise expressly agreed in writing by Honeywell, Honeywell shall not be responsible for the application and functional adequacy of the Goods and Software delivered to Buyer and shall have no further liability to Buyer in relation to the provision of such services. 6.4 Recommendations: Any recommendations or assistance provided by Honeywell concerning the use, design, application, or operation of the Goods shall not be construed as representations or warranties of any kind, express or implied, and such information is accepted by Buyer at Buyer´s own risk and without any obligation or liability to Honeywell. 6.5 Exclusions: These warranties shall not apply if a failure or non-conformance is due in whole or part to: (i) improper use, application, maintenance (including maintenance by any person who is not an authorized Honeywell maintenance provider), operation or installation of the Goods or Software, or exposure of the Goods or Software to operating environments outside Honeywell’s specifications; (ii) any modification of the Goods or Software in a manner inconsistent with the applicable user documentation or not otherwise approved in writing by Honeywell; (iii) use of the Goods or Software with equipment or software not approved in writing by Honeywell or (iv) combination or use of the Goods or Software with any incompatible control and indicating equipment or ancillary products that may be connected to the Goods or Software, or (v) use of Software version which is not the latest software version made available by Honeywell. Any costs incurred by Honeywell in the repair of faults or errors related to these actions shall be reimbursed by Buyer at Honeywell’s then-current rates and Buyer shall indemnify Honeywell against any damages suffered by Honeywell that are directly related to such faults or errors. 6.6 Limitations: The above warranties are sole and exclusive. In no event shall Honeywell or its suppliers be liable for, and Honeywell specifically disclaims, any warranties implied by law or otherwise, including without limitation any warranty of satisfactory quality or fitness for a particular purpose. Honeywell does not warrant that the Goods may not be compromised or circumvented or that the Goods will prevent any person injury or property loss by fire or otherwise.
1 2 3 4 5 6 7 8
§7 Compliance 7.1 Buyer will comply with all applicable laws, regulations, and ordinances of any governmental authority in any country having proper jurisdiction, including, without limitation, those laws of the United States or other countries that regulate the import or export of the Goods and shall obtain all necessary import/export licenses in connection with any subsequent import, export, re-export, transfer, and use of all Goods, technology, and software purchased, licensed, and received from Honeywell. 7.2 Goods and services delivered by Honeywell hereunder will be produced and supplied in compliance with all applicable laws and regulations in Belgium, Luxembourg and the Netherlands. Buyer confirms that it will ensure that all Goods comply with applicable regulatory requirements in the country where they are installed and that they are properly installed and used in accordance with the applicable safety at work laws and regulations, and Buyer will indemnify Honeywell in respect of any costs, claims, actions or liability arising out of any failure to comply with the preceding obligations. 7.3 Unless the costs of recycling Goods covered by the European WEEE Directive 2002/96/EC have been charged to Buyer in accordance with section 3.4, if the provisions of the WEEE Directive 2002/96/EC as implemented in any local jurisdiction apply to Goods, the financing and organization of the disposal of waste electrical and electronic equipment are, with the exception of Goods which are “b2c” as per Honeywell catalogue, the responsibility of the Buyer who undertakes to comply with its obligations to indemnify Honeywell in respect of all such liabilities. Buyer will handle the collection, processing and recycling of the Goods in accordance with all applicable laws and regulations, and shall pass on this obligation to the final user of the Goods and shall provide correspondent documentation to Honeywell. Buyer will ensure that Honeywell receives any necessary information as manufacturer/importer to perform is obligations under the WEEE Directive. Failure by Buyer to
45
General Sales Conditions comply with these obligations may lead to the application of criminal sanctions in accordance with local laws and regulations. Buyer agrees to indemnify Honeywell in respect of any damages and other financial loss suffered by Honeywell as a result of Buyer’s failure to comply with its obligations under this section. 7.4 Buyer shall not sell, transfer, export or re-export any Goods or Software for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor use the Goods or Software in any facility which engages in activities relating to such weapons or missiles. In addition, the Goods or Software may not be used in connection with any activity involving nuclear fission or fusion, or any use or handling of any nuclear material until Buyer, at no expense to Honeywell, has insurance coverage, indemnities, and waivers of liability, recourse and subrogation, acceptable to Honeywell and adequate in Honeywell´s opinion to protect Honeywell against any type of liability. §8 Limitation of Liability 8.1 Honeywell has no liability to Buyer or its customers other than as stated in this section. The exclusions and limitations on damages in this section shall apply regardless of how the loss or damage may be caused and against any theory of liability, whether based in contract, tort, indemnity or otherwise. 8.2 In no event shall Honeywell be liable for (i) any indirect, incidental, consequential loss; (ii) any loss arising from business interruption; (iii) loss of profits; (iv) loss of revenue; (v) loss of use of any property or capital; (vi) loss of anticipated savings; or (vii) loss of data. Honeywell shall not be liable for any loss or damage where that liability arises as a result of its knowledge (whether actual or otherwise) of the possibility of any such loss or damage. 8.3 Honeywell’s liability in respect of any purchase order or otherwise under these terms and conditions shall in no case exceed the contract price of the specific Goods that give rise to the claim. 8.4 Neither party seeks to exclude or restrict its liability for: (i) death or personal injury resulting from negligence; (ii) fraud or gross negligence; or (iii) any matter in respect of which, by law (including the Product Liability Law), it is not permitted to restrict its liability. Honeywell’s liability in respect of a defective Good shall be as specified in section 6. 8.5 Honeywell shall have no liability for any loss or damage caused by the improper handling or operation of the Goods. Honeywell shall not be liable under any circumstances for consequential damage or indirect losses, or any loss of saving, loss of profit, loss of business or damage to reputation. 8.6 Buyer shall indemnify Honeywell against any claims, damages, losses, costs and expenses, including attorney´s fees, incurred by Honeywell due to actual or threatened breach by Buyer of these terms and conditions. §9 Applicable Law Belgian law will govern these terms and conditions and the agreements concerning the sale and supply of goods by Honeywell to the Buyer, with the exclusion of the United Nations Convention on Contracts for the International Sale of Goods, 1980, and any successor thereto. The courts of Brussels will have exclusive jurisdiction to adjudicate any dispute related to the sale and supply of goods by Honeywell to the Buyer and these terms and conditions. §10 Miscellaneous 10.1 The parties may exchange confidential information during the performance or fulfilment of any purchase order. All confidential information shall remain the property of the disclosing party and shall be kept confidential by the receiving party for a period of 10 years following the date of disclosure. These obligations shall not apply to information which is: (a) publicly known at the time of disclosure or becomes publicly known through no fault of recipient, (b) known to recipient at the time of disclosure through no wrongful act of recipient, (c) received by recipient from a third party without restrictions similar to those in this section, or (d) independently developed by recipient. Each party shall retain ownership of its confidential information, including without limitation all rights in patents, copyrights, trademarks and trade secrets. A recipient of confidential information may not disclose such confidential information without the prior written consent of the disclosing party, provided that Honeywell may disclose confidential information to its affiliated companies, employees, officers, consultants, agents, and contractors These terms and conditions (including those stated on the face hereof) constitute the entire agreement of Honeywell and Buyer, superseding all prior agreements or understandings, written or oral, and cannot be amended except by a mutually executed writing. Buyer may not assign any rights or duties hereunder without Honeywell’s written prior consent. Honeywell may subcontract its obligations hereunder without Buyer’s consent. No representation, warranty, course of dealing, or trade usage not contained or expressly set forth herein will be binding on Honeywell. Headings and captions are for convenience of reference only and do not alter the meaning or interpretation of these terms and conditions. No failure by Honeywell to enforce at any time for any period the provisions hereof shall be construed as a waiver of such provision or of the right of Honeywell to enforce thereafter each and every provision. In the event any provision herein is determined to be illegal, invalid, or unenforceable, the validity and enforceability of the remaining provisions shall not be affected and, in lieu of such provision, a provision as similar in terms as may be legal, valid, and enforceable shall be added hereto. Provisions herein which by their very nature are intended to survive termination, cancellation, or completion of Buyer’s order after acceptance by Honeywell shall survive such termination, cancellation, or completion. All stenographic and clerical errors are subject to correction. These terms and conditions shall confer no benefit on any third party or the right to enforce any term or condition. Honeywell reserves the right to send to Buyer information on its products, services or innovations by email. The sending of emails can be revoked by Buyer at any time and for any email receipt. Honeywell reserves the right to send to Buyer information on its products, services or innovations by email. The sending of emails can be revoked by Buyer at any time and for any email receipt. 10.2 The English language version of these terms and conditions will prevail in case of conflict with any translations provided for convenience purposes.
46
Honeywell | Fire Safety
Benelux region
Price list version 2016_V1.2
Practical Information
Practical Information
48
Honeywell | Fire Safety
Benelux region
Price list version 2016_V1.2
Practical Information 1. Price List policies and sales procedures As HONEYWELL FIRE SAFETY (Honeywell) does not manufacture all of the items listed, the customer is required to follow actual manufacturers’ instructions in conformity with the local standards, codes and requirements for appropriate installations. Honeywell is never responsible for installations built of items in this pricelist. Plans and specifications are interpreted as required, but Honeywell takes no responsibility that the information provided is suitable for the intended purpose.
a. Morley-IAS Price List 2016 v1.2 Prices are mentioned in Euro. All indicated prices are gross, excluding VAT. All orders and invoices will be issued in Euro. Effective date of application of this price list 2016: 01/01/2016.
b. Policy and service
1
Honeywell aims to satisfy the customer completely by providing high quality products and quick deliveries. Honeywell maintains large factory inventories, always attempting to render prompt service. In this pricelist, some products are marked with 2W, 4W, 6W, 8W indicating the estimated lead time in number of weeks, after placing the order. Standard products which Honeywell generally has in stock are marked with 1W. Honeywell has a policy of product improvement and reserves the right to change or discontinue any product listed. Honeywell reserves the right to accept or refuse any order. All information supplied by Honeywell is believed to be accurate, but Honeywell is not liable for errors and/or misinterpretations.
2 3
c. Payment and credit conditions 4
Orders will be shipped C.O.D. (Credit on Delivery) except to accounts with established credit. Standard credit terms, net 30 days, date of invoice (1% discount if paid within 7 days).
5
Prices are F.O.B. (Free on Board) Neuss (Germany), and are subject to change without notice. Until payment done, all delivered goods remain the property of Honeywell. The Customer may not charge or dispose of the goods or dispose of sums payable in respect of the goods by way of security. The Customer may resell-or-otherwise dispose absolutely of the goods or install them in premises. This being only on condition that the property is deemed to be transferred to the Third Party upon discharge of the debt of the Customer to Honeywell for those products and all preceding unpaid liabilities. Sums paid to the Customer shall to such extent automatically be the sum of payment of Honeywell and not of the Customer. Honeywell may obtain directly from the Third Party sums of money due to it and give a receipt therefore in the name of the Customer. If Honeywell agrees, to induce payment by the Third Party to provide - or undertake to provide - maintenance services, licenses or other products prepaid by the Third Party, which may as a result of the Customer’s default not be provided, Honeywell may add the price to the Customer’s debt. Until payment, therefore, the relevant goods shall be held separately from the other Customer’s goods. These goods must be maintained in ‘as new condition’ and clearly designated as Honeywell’s property. Honeywell is authorized to enter on premises where the goods are stocked, inspect these and remove them if the Customer is in fault. If Honeywell’s property is not clearly designated, Honeywell may remove any Honeywell branded products.
6 7 8
In case of any complaint about an invoice, the customer has to transmit a written complaint to the administration department within 10 days from date of invoice. Thereafter, no more corrective actions, like issuing credit notes, can be made. Honeywell will stop all deliveries to customers which have open invoices with more than 15 days overdue payments. The customer will be informed in written at due date and it will be mentioned as well on all new Order Confirmations, transmitted by fax or e-mail.
d. Return or exchange of goods (See guidelines § 3) A restocking charge of 25% of the value of returned goods will be automatically charged. Under returned goods, Honeywell understands goods which were wrongly ordered by the customer. In case the customer sends an equal sized or valued replacement order, the restocking charge will be lowered to 15% (instead of 25%). These goods have to be returned within 30 days from delivery date using the RMA form. The customer has to contact Honeywell first to get a RMA number. When returning products they should contain the original and unopened packaging. All returns for credit are subject to inspection and testing in our premises before actual determination is made to allow credit. Honeywell will not be responsible for any dismantling, re-assembling or re-installation charges. Claims for shortages must be reported in written immediately, this means within the next 24h. Be aware that not all products will be accepted for return or exchange. Every request for returning goods will be handled separately. 49
Practical Information e. U.S. trade embargoes This is a general notice to all Honeywell customers to remind them of the various trade embargoes and restrictions imposed by the U.S. against certain countries, entities and individuals, and to outline the procedures to be followed to comply with this embargoes and restrictions. PROHIBITED COUNTRIES: Honeywell Corporate Policy 110 prohibits all direct and indirect transactions with embargoed countries, regardless of originating location. The embargoed countries include following countries: Cuba, Myanmar (Burma), Iran, Iraq, Liberia, North Korea, Syria, Sudan, Zimbabwe.
2. Order policy a. About the order Only written orders received by fax, post or e-mail will be accepted and treated. The order must include: - product reference, description and quantity - requested delivery date - the customer’s order reference In case a written Honeywell quotation was made by a Honeywell sales representative then it is important that the Honeywell quotation reference is mentioned on the order as well, otherwise standard conditions will automatically be applied.
b. Purchase order flow chart
If the customer service has problems or doubts about your order, they’ll contact you. In order to avoid extra delays in shipment, please respond quickly.
Incoming order at Honeywell (fax, email, post)
A purchase order contains following information: -
After verification, the order will be booked in at Honeywell. You will receive an order confirmation (email or fax)
Customer reference Correct delivery address Complete part numbers, matching our latest Price List
Please check the confirmation, to check lead times and possible errors. If you have any doubts or remarks, don’t hesitate to contact the customer service immediately.
Shipment of the order. You will receive a despatch note (email or fax) and invoice (mail)
Please check the received goods immediately. If there are damages caused by the shipment, you need to make a written complaint to the forwarding company immediately.
Arrival of goods on site. Please inspect the arrived goods immediately.
c. Delivery All orders will be shipped separately at the address specified on the Customer’s order. Collection of goods in any Honeywell office/warehouse is not allowed. If you suspect the goods have been damaged during transportation, please make sure to notify it by written to the forwarding agent at the time of the delivery.
50
Honeywell | Fire Safety
Benelux region
Price list version 2016_V1.2
Practical Information d. Administrative cost and freight cost In order to limit the workload due to receiving many small orders, an administrative cost can be invoiced for small orders additionally to the standard freight charge. In the below table, you can find details about minimum order amounts to avoid administrative costs. All shipments will be subject of a freight cost irrespective of the total order amount. The below mentioned rates are just an indication and are subject to change without any notice at any time. Administrative fee: Country of delivery Benelux & Switzerland EU countries (Non Benelux) Non EU (Export)
Nett order amount < 500 € 15 € 25 € 75 €
≥ 500 €
75 €
1
Custom clearance fee: Country of delivery
Nett order including freight < 1000 €
≥ 1000 €
EU countries Switzerland & Non EU
2
95 €
3
Freight cost (indicative tariffs): BENELUX & SWITZERLAND* *Note for shipments to Switzerland: these tariffs are only valid for orders with invoice amounts (freight cost included) below 1.000 and less then 30kg.
UPS (48h delivery - if material in stock) 0 - 10 kg 6,50 €
4 5
9,75 € 13,00 €
10 - 20 kg 20 - 30 kg BENELUX & SWITZERLAND
6
DACHSER or TNT (2-5 days) 42,50 € 48,00 € 55,00 € 65,00 € 75,00 € 90,00 € 145,00 € 160,00 € T.B.A.
30 - 50 kg 51 - 100 kg 101 - 150 kg 151 - 200 kg 201 - 250 kg 251 - 350 kg 351 - 450 kg 451 - 550 kg > 551 kg EU COUNTRIES (Non Benelux) NON EU (EXPORT) EXPRESS DELIVERY
7 8
T.B.A. T.B.A. T.B.A.
ADR freight fee: Country of delivery EU COUNTRIES
NON EU COUNTRIES
UPS 0 - 30 kg
10 €
> 30 kg
35 € T.B.A.
Notes: • The above mentioned prices are indicative tariffs (excl. VAT) and are subject to be changed without prior notice. • The volumetric weight will be calculated for each shipment. If the volumetric weight is higher than the weight in kg, then a freight cost will be invoiced based on the volumetric weight. • Products like aerosols and flammable containers are considered as dangerous goods and will be shipped separately from the rest of the order.
51
Practical Information Insurance of the freight is always included in the price. A backorder shipment is always FOC in case Honeywell can’t ship the complete order at once. For orders on call, freight charges are applied at every shipment. For the shipment of ionic detectors, separate freight charges are always applied. Express deliveries are only possible within the Benelux and Switzerland region. Express shipment costs will be charged separately in accordance to chosen formula: - Top Courier: same day delivery only if order is placed before 14.00 (only for The Netherlands) - UPS Express: next day delivery before 10.30 (limited areas). Express deliveries are not available for every city, please contact the logistic department. Please specify clearly on the order which of the above express deliveries may be necessary.
e. Order deadline for 48h deliveries Honeywell takes special care to assure delivery of standard products within 48 hours. If this 48h delivery turns out to be impossible, you will be informed by the delivery date given on the order confirmation. To ensure delivery within 48h, please send your written order by fax or e-mail before 14h and 11h on Friday. For mounting and testing specific configured panels, standard lead time is 72h. Every care has been taken in the preparation of this Price List. However, Honeywell shall not be responsible for any errors and/ or misinterpretation of any of the mentioned prices and product descriptions. All prices and specifications are subject to change without notice.
f. Order cancellation In case of order cancellation, completely or partially, please note that a cancellation fee of 15% of the total cancellation amount will be invoiced. Only products with a lead time equal to 1W (see lead time indication) can be cancelled. Special products are normally non stock products with a different lead time then 1W and are never subject for cancellation or credit. Cancellations have to be done in written within 24h after receipt of the order confirmation. Cancellations have to be reported asap to the Customer Service department to one of the following email addresses:
[email protected] (BE) or
[email protected] (NL).
g. How to trace your packages shipped The used carrier and tracking number for the package is mentioned on the bottom of the dispatch note sent by fax or email. Honeywell established partnerships with UPS and TNT carrier companies. UPS will be used for shipping packages with a weight of less than 30kg or ADR shipments and TNT will be used for shipping packages of more than 30kg or pallets shipments. Delivery terms for UPS shipments are 48h and for TNT shipments it will be 3-5 working days. If there is marked UPS, go to the UPS website (www.ups.com) and type the tracking number at the indicated space. If there is marked TNT, (for bigger packages and pallets), go to the TNT website (www.tnt.com).
52
Honeywell | Fire Safety
Benelux region
Price list version 2016_V1.2
Practical Information 3. Warranty Honeywell guarantees Morley-IAS and System Sensor detectors against all manufacturing faults or hidden defects for a period of three (3) years from date of manufacture. All other equipment (Fire Control Panels and derivates) and cleaned detectors are also guaranteed against manufacturing faults and hidden defects for a period of one (1) year from the date of manufacture. Products that have no production date stamp have a warranty of one (1) year from date of original purchase by the customer unless the installation or catalogue datasheet sets for a shorter period, in which case the shorter period will be applied. For most products, Honeywell carries the warranty against the date of manufacture. For these products, the date of manufacture can be established by the date code label on the base of the device: 13 Year
49 Week
T Trieste
4. Returning material policy
1
a. Return for repair (RMAR procedure)
2
The following guidelines must be followed when returning defective products to Honeywell. A return authorization number has to be requested by using the standard RMAR form. Please send requests per email (
[email protected]) or by fax (+32 (0)4 247 02 20). On receipt of the request, a first evaluation will be done by the Honeywell Technical Service, Honeywell reserves the right to accept or refuse the repair. In case the return is accepted, an RMAR number will be attributed and the customer can return the (defective) components or detectors/modules to the address mentioned below.
3 4
HONEYWELL FIRE SAFETY Attn. : Repair Department Liege Airport Business Park Building 50 B-4460 Grâce-Hollogne (Belgium)
5 6
A copy of the RMAR form must be added to the shipped parcel. All returns for repair within warranty period will be first inspected to evaluate product failure. If product failure was not due to manufacturer’s defect in material or workmanship, repair will not be covered under warranty, and automatically changed to a chargeable repair. All returned goods are automatically tested for diagnostic. If no problem is detected, the product will be returned to the customer and costs will be invoiced.
7
b. Repair / Verification of Control Panels and Accessories
8
Each inspection / evaluation of a control panel and its elements or any other device (except detectors), will always imply a cost calculated at 15% of gross product price when the product is out of warranty and between 1 and 5 years old, or 25% of gross product price for products between 5 and 10 years old. Products older than 10 years are subject for evaluation. A minimum repair / verification charge of 175 € is applicable for all ‘out of warranty’ products. Above mentioned charge is excluding replaced parts or used materials for repair. These are billed separately on the invoice. When a product is in warranty and found ok, a charge of 175 € is applicable for testing and verification. The product shall be returned via normal procedure to owner. Products with a gross value of less than 500 € are considered as being not economical interesting to repair. In most cases it will be more cost-effective to order a new replacement product, rather than starting the repair procedure.
53
Practical Information Repair process Product to return for repair In warranty (PLT < 1 year) Defect? Yes No cost No 175 € inspection fee
Warranty expired (1 year < PLT < 5 years) Repair fee 15% of gross price with a min. of 175 €, excl. material price
Warranty expired (5 years < PLT < 10 years) Repair fee 25% of gross price with a min. of 175 €, excl. material price
Warranty expired (PLT > 10 years) Return not accepted (Repair can no longer be guaranteed)
PLT: Product Life Time
c. Return for credit (Control Panel, detectors, accessories) The following guidelines should be followed when returning products to Honeywell. First, please contact your local customer service to obtain the standard return form and the RMA number (RMA form). They will help you to fill in this form with necessary information: - Customer references - References of products or components - Exact quantities - Invoice number or related order number - Detailed description of the complaint/reason for return for credit (wrong delivery, wrong order quantity …) Then, you can transmit the standard return form duly completed to the local customer service. On receipt of the request, a first evaluation will be done. Honeywell reserves the right to accept or refuse the return. The components or detectors/modules have to be returned to the address mentioned below. A copy of the RMA form must be added to the shipped parcel. HONEYWELL FIRE SAFETY Attn. : CUSTOMER SERVICE Liege Airport Business Park Building 50 4460 Grâce-Hollogne (Belgium) Ref.: RMA number ... When you return material, please use the original carton containing packaging inserts. All returns for credit are subject to inspection and testing in our premises before actual determination is made to allow credit. Any item returned for credit which is out of warranty will be refused for credit. All material that doesn’t comply with conditions for credit will be returned. See also RETURN OR EXCHANGE OF MERCHANDISE § above.
54
Honeywell | Fire Safety
Benelux region
Price list version 2016_V1.2
Practical Information d. Returning detectors for factory revision Honeywell Fire Safety offers a unique Factory Revision Program which gives you a number of outstanding advantages in order to extend the product life time and performance of your detectors. During the Factory Revision Program, your detectors undergo the following manipulations:
• the actual value of the sensing element is compared to the initial value of the product. • the smoke chamber and sensing element undergo a thorough cleaning • the sensing element is recalibrated • the detector housing (visible part) is replaced by a new one • the cleaned and recalibrated detector undergoes a functional and duration test • after the quality check, a green sticker mentioning the date of revision is put on the detector When returning detectors for factory revision, the following guidelines must be followed.
• First, please contact the local customer service to obtain the RMA Factory Revision form. They will help you to fill in this form with the required information, like your reference, the model and type of detectors, the quantities. • Then, you transmit the standard return form duly completed to our local customer service. They will provide you a unique RMA Factory Revision number. This RMA Factory Revision number allows you to send the detectors to our offices.
1
The complete procedure can be found in the flowchart here below.
3
The dirty detectors need to be sent to Honeywell Fire Safety, accompanied by a RMA form – Factory Rev. :
2
The return shipment needs to comply with following rules.
Liege Airport Business Park B50, 4460 Grâce-Hollogne - Belgium
4
The shipment contains: -
The detectors are then sent to the factory for evaluation and test.
-
the RMA form – Factory Rev. only Morley-IAS and/or System Sensor detectors no high profile detectors no ionic detectors min. 50 pieces, max. 1.500 pieces
5 6
Is your detector defective?
No The detector is not classified as defective and will included in the factory revision program for cleaning, recalibration, mounting of a new cover, testing and quality control. Prices:
7
Yes The detector is found defective. Then, a check will be done to see whether it is still in the warranty period of 36 months.
8
- optical smoke detector: 14€ excl. VAT - smoke detector with CO sensor: 35€ excl. VAT - wireless smoke detector: 37,50€ excl. VAT
Yes < 36 months You will receive a new detector, free of charge
No
>36 months The defective detector will be returned to you, and a handling fee of 5€ excl. VAT will be taken into account.
Factory Revision tariffs: Morley-IAS and System Sensor detectors (series MI and MI-S2) Wireless detectors (SGxxx) (incl. replacement of the batteries)
14,00 €* 37,50 €*
(*) The above prices are net per detector, excluding VAT
55
Practical Information e. Returning (ionic) detectors for disposal Given the extremely high freight charges on the export and import of ionic detectors, a Factory Revision Program is not economic. It is only possible to return ionic detectors for disposal in a legal way. First, please contact the local customer service to obtain the RMA Ionic Detector Disposal form. They will help you to fill in this form with the required information, like your reference, the model and type of detectors, the quantities, do you need an attestation of destruction. Then, you transmit the standard return form duly completed to our local customer service. They will provide you a unique RMA Cleaning number. This RMA cleaning number allows you to send the detectors to our offices. The complete procedure can be found in the flowchart here below. The ionic detectors need to be sent to Honeywell Fire Safety, accompanied by a RMA form – Ionic det. disposal :
The return shipment needs to comply with following rules.
Liege Airport Business Park B50, 4460 Grâce-Hollogne - Belgium
The shipment contains: -
the RMA form – Ionic det. disposal only Morley-IAS and/or System Sensor detectors only detectors with a radioactive source min. 200 pieces, max. 1.500 pieces
The ionic detectors are then transported in accordance with the rules in force and are shipped to an approved disposal company for radioactive waste.
After the destruction of the detectors with a radioactive source, a cost of 20€/piece excl. VAT will be charged. On simple request, you can receive a certificate of destruction.
Only detectors with a radioactive source manufactured by System Sensor/Pittway Tecnologica will be destructed in a legal way by the Trieste facility. Due the radioactive source control legislation, we cannot accept detectors from other manufacturers. Please, therefore, return devices to the original manufacturers, who have a legal responsibility for disposal of their units. Note that ionic detectors have to be packed separately (with respect to the regulations) and may not be mixed with other types of detectors. Due to the strict regulations concerning the import of radioactive materials into Italy, the following additional information must be provided: 1. Include on the Airway Bill and Shipping documents the following statements: a) Smoke detectors each containing 18,5 kBq of Am241» (low profile detectors) or «37 kBq of Am241» (high profile detectors). b) «Radioactive Material Excepted packages - Instruments» NOTE: Ionisation products must be returned Air Freight in some countries. 2. Return goods, carriage prepaid to Grâce-Hollogne.
56
Honeywell | Fire Safety
Benelux region
Price list version 2016_V1.2
Practical Information 5. Rental of specialized test tools Honeywell offers the possibility to rent following item: Part number (model) Description
Net price per week
20/20-310 Fire simulator for triple IR flame detectors 150 € The above mentioned price are net, excl. VAT and shipping. The standard duration of the rent is 1 week. In case you want to rent the above item, please follow the below guidelines: • • •
Please contact your sales representative first. Honeywell will not rent any devices without a written purchase order. In agreement with Honeywell, you can pick up the device in the local Honeywell office. A standard document for rent of material will be filled in.
1
If, after returning the device, it turns out that the item has been damaged during the rent period, Honeywell reserves the right to invoice the repair costs. Also, if the agreed period of rent has been surpassed, Honeywell has the right to invoice the excess period. Invoicing is always done per week.
2
6. Services
3
a. Trainings 4
Only direct Honeywell customers can be registered to follow a technical training course on Honeywell products. Technical training courses will take place in a Honeywell office and can be organized for a group of minimum 2 people and maximum 8 people. A Technical Training Request Form may be filled and fax to Honeywell as a training request. Upon arrival of such a Technical Training Request you will be contacted in order to fix a date for the requested technical training.
5
Training rate: 125 € (net, exclusive VAT) per person for 1/2 day (max. 8 people per group) 200 € (net, exclusive VAT) per person for 1 day (max. 8 people per group) Introduction trainings of new products will be organised free of charge.
6
All participants of a training course will receive a Certificate of training.
7
Note: A combination of several parts upon request.
8
b. Intervention on site For all technical repairs and interventions on site or at the Customer’s premises, following rates are applicable: 82.5 € per hour (net, exclusive VAT), with a minimum of 1 hour. 0,62 € per kilometre (net, exclusive VAT). For a diagnostic site visit by our technical support engineers please fill in the Site Visit Request Form. No site visit will be carried out if there’s not a representative of the customer present with knowledge of the installed system and trained by the Honeywell staff.
7. Environmental taxes According to the European WEEE directives, environmentally taxes are related to some product categories. Honeywell will therefore invoice automatically these product and country related contributions for the concerned goods purchased and declare to the official instances.
57
Practical Information 8. Contact details Office locations in Benelux Honeywell Life Safety SA Liege Airport Business Park, B50 4460 Grâce-Hollogne - Belgium Tel: +32 4-247 03 00 Fax: +32 4-247 02 20
Honeywell Life Safety BV Burgemeester Burgerslaan 40 5245 NH Rosmalen (‘s-Hertogenbosch) - The Netherlands Tel: +31 73-627 32 73 Fax: +31 73-627 32 95
Sales department Belgium The Netherlands Tel: +32 4-239 91 17 Tel: +31 73-627 32 60 Tel: +31 73-627 32 64 Tel: +31 73-627 32 68 E-mail:
[email protected] E-mail:
[email protected] Customer service department Belgium The Netherlands Tel: +32 4-247 03 00 Tel: +31 73-627 32 73 E-mail:
[email protected] E-mail:
[email protected] Technical service department - Support Belgium The Netherlands Tel: +32 4-239 91 19 Tel: +31 73-627 32 65 Tel: +32 4-239 91 16 Tel: +31 73-627 32 58 E-mail:
[email protected] E-mail:
[email protected] Technical service - Repairs Tel: +32 4-367 82 56 E-mail:
[email protected] Trainings Belgium The Netherlands Tel: +32 4-239 91 16 Tel: +31 73-627 32 65 E-mail:
[email protected] E-mail:
[email protected]
58
Honeywell | Fire Safety
Benelux region
Price list version 2016_V1.2
Practical Information
1 2 3 4 5 6 7 8
59
Honeywell Life Safety Benelux Honeywell Life Safety - Belgium Liège Airport Business Park Building 50 4460 Grace-Hollogne T: (+32) 4 2470300 F: (+32) 4 2470220 Email:
[email protected] www.morley-ias.be
Honeywell Life Safety - The Netherlands Burgemeester Burgerslaan 40 5245 NH Rosmalen (s’-Hertogenbosh) T: (+31) 736273295 F: (+31) 736273298 Email:
[email protected] www.morley-ias.nl
Morley-IAS Price list 2016 V1.2 © 2015 Honeywell International Inc.
