INNOVATION AWARD 2006

Excellent climate protection

Paradigma solar heating systems

Welcome to the sunny side. All good things come from above Its diameter is 109-times that of the earth, and its outside temperature is 6,000 °C. It generates an output of 370 quadrillion watts and continuously sends this energy, equivalent to 100 million nuclear power plants, to the earth. And theres no danger of this stopping for the next 5 billion years. Is there any other source of energy apart from the sun which, in contrast with Ideal:

fossil fuels, is safe and available in an unlimited supply? Is there any other form

the sun supplies free

of heat energy which is available at no charge and friendly to the environment i.e.

energy to your home.

CO2-free?

And from Paradigma Paradigma solar heating systems provide the best way of effectively using solar energy for water heating and heating support inside your own 4 walls. As one of the leading suppliers of ecological heating systems in Europe, Paradigma has been developing heating systems with integrated solar collectors since the late 80. Optimal:

Paradigma solar heating systems such as the AquaSystem awarded with the

solar energy for people

Bundespreis 2006 (German Federal Award) are now

and nature.

amongst the most innovative. These systems also feature some of the highest output yields.

Join in, harvest the sun, save energy!

2

Ideal for the climate The installed base of solar heating systems has already saved roughly 70 million litres of heating oil* – this corresponds to more than 2,300 full road tankers. Even better for the environment and climate: 190,000 tons of harmful CO2 are avoided in the first place. Paradigma solar heating

And for the heating boiler

systems have an appea-

The installation of a Paradigma solar heating system also significantly extends the life

evacuated tube collec-

of your boiler. This means the heating boiler hardly has to be switched on to heat water

tors can be adapted to

during the transitional periods and in summer. All this is done by your solar system.

any architecture.

ling look. The attractive

* applies to over 66,000 CPC collector modules which Paradigma sold and installed by the end of 2006.

3

The choice of collector is decisive. Enhances your roof Users of Paradigma solar heating systems Made in Germany can be seen from far away. In an age when everyone is talking about climate change, these collector modules with up to 21 evacuated tubes are visible proof of property owners acting in an environmentally conscious manner to make sparing use of the available resources.

Converting light to heat Paradigma evacuated tube collectors convert solar rays to heat energy using a principle which is both simple and sophisticated. Each collector module is equipped with a row of evacuated tubes that use a special absorber layer to convert sunlight to heat. Each tube functions like a thermos flask by storing heat for longer periods and not emitting it. This becomes noticeable when touching the tubes on a connected collector. The outer tube shell is cold. The inside is hot. In order to ensure that light also reaches the rear of the evacuated tubes, a highly Their clever design means

reflective CPC-reflector (Compound Parabolic Concentrator) directs the solar rays

that CPC evacuated tube

shining between the tubes to those sides not directly exposed to light. The reflector

collectors produce some

also ensures that the light strikes the absorber at an optimum angle (for further

of the highest output

details, see page 18).

yields particularly during transitional periods.

4

This guarantees high yields...

CPC 14 Star azzurro best flat plate collector

... even when there is little sunshine. CPC evacuated tube collectors output high

average flat plate collector

energy yields over the whole year, even during unfavourable weather conditions such

454 W

484 W

as transitional periods, during the winter or when the skies are cloudy.

collectors available today. At 0 °C, the energy yield of the CPC evacuated tube collector is up to 5.4 times higher than an average flat plate collector. This means that when using average flat plate collectors, 5.4 times the collector surface area would be needed to produce the same amount of energy.

345 W 207 W

evacuated tube collector produces 40 % higher energy yields than the best flat plate

241 W

per m2, an outside temperature of 10 °C and a flow temperature of 60 °C , the CPC

84 W

... particularly during poor weather conditions. At a solar irradiation level of 400 W

Collector output (watts)

Little space required ...

0 °C

Air temperature

0 °C

Comparison between evacuated tube collectors and flat plate collectors at an irradiation level of 400 W per m2, 2.33 m2 aperture surface

CPC Allstar

and 60 °C flow temperature.

Single collector for solar-heated hot water Specially designed for single-family homes with up to 4 persons Installation on flat and pitched roofs as well as facades 10 year glass breakage guarantee for evacuated tubes*

CPC Star azzurro For solar-heated hot water and heating support Can be connected in series up to 15 m2 Installation on flat and pitched roofs as well as facades 10 year glass breakage guarantee for evacuated tubes* Quality label for solarthermal products based * as the result of hail or frost damage. Guarantee valid for whole of Europe.

on European standards.

5

One of the most innovative systems ever. The Aqua solar heating system Assuming that a specialized installer could easily connect a solar heating system to your existing heating installation and components such as the hot water tank could be re-used‚ wouldn´t you be interested in immediately upgrading your heating system to environmentally-friendly solar energy? The patented Aqua solar heating system from Paradigma is one of the most innovative systems around. What makes it special: Pure water, instead of the usual antifreeze mixture, transports heat from the solar collector to the hot water storage tank. This means that in most cases you do not need to replace your storage tank in order to enjoy solar-heated water or support your heating with solar energy. In a nutshell: the sun can come, the tank can stay.

Award-winning Not only has the Aqua solar heating system from Paradigma been installed almost 20,000-times in Europe, it was also awarded the Bundespreis 2006 (German Federal Award) for outstanding innovative craftsmanship.

INNOVATION AWARD 2006

6

Simple to connect The AquaSystem is particularly suited to allow simple connection to existing heating installations. Its versatility also comes to the fore in new installations. The collector functions as a second independent heating boiler to reduce oil, gas or wood pellet usage. The minimum flow temperature of 60 °C means that solar-heated water is directly available once it has filled the top layer of the tank.

Long-life design The AquaSystem is easier to maintain than conventional solar heating systems in which the antifreeze-water mixture has to be regularly replaced. Furthermore the AquaSystem is equipped with an automated functional check. Errors are signalled by an acoustic alarm. This will also make you feel good – a life-long guarantee against frost damage.*

Aqua solar heating system Patented solar heating system using pure water Ideal for upgrading an existing heating installation to use solar energy No need to replace the hot water storage tank The boiler life is extended Heating emissions are reduced For 2 – 8 person households Convenient drinking water heating and heating support Can be combined with condensing gas boiler and wood pellet systems Life-long guarantee against frost damage*

* refers to the life of the installed AquaSystem. Subject to compliance with the safety provisions and all requirements stated in the Paradigma instruction documents as well as the general terms and conditions issued by Paradigma Energie- und Umwelttechnik GmbH & Co. KG (available from your Paradigma system partner).

7

Few components, many advantages. Aqua solar heating systems include everything you need When compared to conventional solar heating systems, an AquaSystem consists of a manageable amount of individual components. All of these are synchronised to provide optimum compatibility. Ultimately the goal is to have extremely satisfied and contented customers.

Collector including station and controller It all starts with the solar collector on your AquaSystem. Every solar ray is collected, even the weak ones. This light is converted to heat which is transferred to the water flowing through the collector tubes.

The solar collector converts light to heat.

The solar station then pumps this solar-heated water to the hot water storage tank, where the heat can be extracted immediately and directly. The solar station also pumps cold water back to the collector to close the circuit. The solar controller is responsible for energy management in the solar circuit. It indicates the energy yields whilst ensuring trouble-free and safe operation.

The solar controller ensures optimum interaction between

The solar station keeps

individual components.

the circuit moving.

8

Storage tanks also available Regardless of whether you use your AquaSystem to produce solar-heated hot water or provide additional solar heating support – a wide range of high-performance storage tanks is available to meet specific requirements. From solar storage tanks to the rapid heating of drinking water, combined storage tanks with integrated hot water stainless steel tanks and fresh water storage tanks for water heating and partial solar heating – all Paradigma tanks provide a high degree of comfort and instant hot water as soon as it is supplied. Existing tanks can also be reused. This is what makes Aqua solar heating systems special: they can simply be connected to existing heating systems.

The tank stores the solar-heated water.

Components of the Aqua solar heating system CPC Allstar collectors for water heating CPC Star azzurro collectors for water heating and partial solar heating Solar station STAqua SystaSolar Aqua solar controller Aqua solar storage tank for water heating TITAN Aqua combined storage tank for water heating and partial solar heating OPTIMA Aqua fresh water storage tank for water heating and partial solar heating

9

AquaPackage Deals CPC Allstar and CPC Star azzurro. Solar energy, simpler than it´s ever been Paradigma has bundled the AquaPackage Deals to make it even easier to change to solar energy. These bundles contain all the required components for utilising solar energy in an effective, economical and environmentally friendly way. Suitable for upgrading existing systems or new installations. May be utilised for water heating, partial solar heating or both.

AquaPackage Deals CPC Allstar Your household includes a maximum of four persons. Your maximum daily hot water consumption is 150 – 200 litres. You would like to use your Aqua solar heating package for solar water heating. You would like to continue using your existing tank with only one heat exchanger. The AquaPackage Deals CPC Allstar are the ideal solution. They provide increased hot water comfort and better usage of existing storage capacity. And if you still want to install a new storage tank – the compact Aqua 190 solar storage tank requires less space, whilst having a capacity of 190 litres as well as

AquaPackage Deals CPC Allstar For pure solar-heated water AquaPackage CPC 32 Allstar for 2 – 3 persons AquaPackage CPC 40 Allstar for 3 – 4 persons

10

Optional storage tank

lower heat losses.

AquaPackage Deals CPC Star azzurro The AquaPackage Deals CPC Star azzurro are suitable for solar water heating in households of up to eight persons. They are ideal for upgrading existing heating installations and hot water storage tanks with only one heat exchanger. It is also possible to feed any excess solar energy into the heating system – using so-called tuning kits from Paradigma to provide heating support. If there is no suitable existing tank – the Paradigma system partner will immediately identify this –, Paradigma also supplies tanks suitable for use with the AquaPackage Deals CPC Star azzurro: Aqua solar storage tank in sizes up to 470 litres.

AquaPackage Deals CPC Star azzurro For solar-heated hot water and (optional) heating support Subsequent extension of the collector area possible AquaPackage CPC 21 Star azzurro for 2 – 3 persons AquaPackage CPC 45 Star azzurro for 3 – 4 persons AquaPackage 2 x CPC 14 Star azzurro for 3 – 4 persons AquaPackage 2 x CPC 30 Star azzurro for 4 – 6 persons

Optional storage tank

AquaPackage 2 x CPC 21 Star azzurro for 5 – 8 persons

11

Storage tank for solar-heated water. Hungry for the sun If your existing tank is too small or badly insulated, or if it cannot be integrated into the AquaSystem for other reasons, then the Aqua solar storage tank is the right choice in pure water heating applications. Quick and effective: upgrading to the sun.

Hot water, fast The Aqua solar storage tank from Paradigma is a vertical floorstanding tank for drinking water and water heater. By connecting the solar energy system to the top of the Aqua solar tank, hot water is available much quicker than in conventional solar storage tanks, which use a water-antifreeze mixture as the heat transfer medium and feed the solar heat through a heat exchanger below. The Aqua solar storage tank from Paradigma is easy to integrate in the heating installation. It uses a bare-tube heat exchanger to which the solar energy system and Paradigma condensing gas boiler or wood pellet boiler – or an existing boiler – are connected.

It usually only takes a few hours after delivery until assembly is completed and you can enjoy your first bath in solar-heated water.

12

Produced to a high quality The Aqua solar storage tanks from Paradigma are made from ST 37-2 steel with enamelled and anodic protection against corrosion. The storage tanks are suitable for systems with maximum permitted water temperatures up to 95 °C and operating overpressures up to 10 bar. CFC-free polystyrene foam insulation retains the heat where it belongs – in the storage tank.

Easy to install As opposed to conventional storage tanks, no separation is required between the solar and heating circuits. This significantly reduces the installation effort.

Aqua solar storage tank For the rapid heating of drinking water Suitable for water with a high limescale content Solar circuit does not contain any antifreeze agent Available in four sizes up to 470 litres Easy installation

13

CPC/TITAN AquaPackage Deals including storage tank. CPC/TITAN AquaPackage Deals Do you want to use solar energy to heat the water in your home and provide partial solar heating – then the CPC/TITAN AquaPackage Deals are the right ones for you. In summer, the CPC/TITAN AquaPackage Deals almost completely relieve the load on the existing boiler. During the transitionary months, solar energy is used to support the heating. And even in the depths of winter, a large proportion of the drinking water is solar-heated. The package includes a CPC Star azzurro evacuated tube collector that feeds hot water above 60 °C into the combined storage tank. It therefore acts as a second boiler of equal importance. In order to further minimise the power consumption of your AquaPackage Deals, the solar pump is only switched on if a worthwhile amount of solar heat is stored in the collector. This interval operation can result in large temperature differences between the flow and return and helps minimise pipe losses.

CPC/TITAN AquaPackage Deals For solar water heating and partial solar heating using the return flow boost principle AquaPackage 2 x CPC 21 Star azzurro/TITAN 400 for 2 – 4 persons AquaPackage 2 x CPC 45 Star azzurro/TITAN 600 for 4 – 5 persons AquaPackage 3 x CPC 21 Star azzurro/TITAN 600 for 5 – 6 persons AquaPackage 3 x CPC 45 Star azzurro/TITAN 850 for 6 – 8 persons

14

Combined storage tank TITAN Aqua The TITAN Aqua is the integrated storage tank solution used in the CPC/TITAN AquaPackage Deals. The stored solar energy can be used for solar water heating as well as partial solar heating. The integrated heating buffer significantly reduces the frequency of boiler switch-on operations. This extends the life of the boiler and reduces harmful emissions.

Peak withdrawal output The TITAN Aqua has an integrated hot water stainless steel tank, available in three sizes up to 230 litres. It has an impressive hot water peak withdrawal output, despite its relatively low drinking water capacity. The TITAN Aqua is a vertical floorstanding steel tank with a quality certificate. Its excellent thermal insulation is made from CFC-free polystyrene foam. It is suited to heating water storage for heating systems with flow temperatures of up to 90 °C, heating water-side operating overpressures of up to 3 bar and hot water-side operating pressures of up to 8 bar.

Combined storage tank TITAN Aqua Impressive hot water peak withdrawal output Solar heating connection by means of solar return connection/buffer principle Low space requirement due to moderate tank size Three sizes up to a capacity of 836 litres Available in AquaPackage Deals up to 15 m2 collector area

15

CPC/OPTIMA AquaPackage Deals including storage tank. CPC/OPTIMA AquaPackage Deals Whether you wish to install a heating system in a new building or completely replace an older heating installation, the AquaPackage CPC/OPTIMA offers many advantages. Solar energy is an environmentally friendly, economical and effective way to heat water and provide partial solar heating. The CPC/OPTIMA AquaPackage includes: an appropriately dimensioned CPC Star azzurro evacuated tube collector, matching OPTIMA Aqua fresh water storage tank, STAqua single-string solar station, SystaSolar Aqua solar controller.

Solar energy specialists Your Paradigma installation engineer will advise you on the right choice of AquaPackage Deals. He will plan, install and maintain your system. Simply ask for further details.

CPC/OPTIMA AquaPackage Deals For solar water heating and partial solar heating using the buffer principle AquaPackage 2 x CPC 21 Star azzurro/OPTIMA 500 for 2 – 4 persons AquaPackage 2 x CPC 45 Star azzurro/OPTIMA 800 for 4 – 5 persons AquaPackage 3 x CPC 21 Star azzurro/OPTIMA 800 for 5 – 6 persons AquaPackage 3 x CPC 45 Star azzurro/OPTIMA 1000 for 6 – 8 persons

16

Combined storage tank OPTIMA Aqua The OPTIMA Aqua heating buffer tank is an integral part of the AquaPackage Deals CPC/OPTIMA . Its strength: Water is only heated on demand. The heated water is therefore of a high hygienic quality. Instead of water which has been stored in a tank, you will always have “fresh” hot water.

Hot water comfort As water is being used, the stratification technology ensures the controlled stratified discharging of the storage tank. More than double the storage tank heat is used to heat the water than without this control technology. The heat flowing into the tank is available for use after a brief charging period. No heat escapes into the cellar room thanks to the use of CFC-free polystyrene foam, reflective coatings and siphoned storage tank connections; consequently less reheating is required and more hot water is available.

Fresh water storage tank OPTIMA Aqua For hygienically heated fresh water based on the flow-through principle High degree of hot water comfort Storage tank with a capacity of several days for water heating and partial solar heating Three sizes up to a capacity of 990 litres Available in AquaPackage Deals up to 15 m2 collector area

17

Evacuated tube collectors CPC Allstar and CPC Star azzurro

The design principle of CPC evacuated tubes 1

Evacuated tubes based on the thermos flask principle and consisting of two concentric glass tubes with an evacuated gap. This serves to prevent heat loss.

2

Highly selective absorber layer, Al/AlN, on the inner glass tubes. For maximising energy yield.

3

Aluminium heat transfer plate. Provides optimum heat transfer the absorber to the heat transfer medium system.

4

U-shaped stainless steel pipe. For effectively transporting the extracted heat.

7

5

Mineral wool insulation with aluminium lamination. Serves to prevent heat loss in the manifold.

6

Compression ring fitting Ø 12 mm for flow and return. For safe and easy-to-install pipework connections.

A highly reflective, weather resistant CPC reflector (Compound Parabolic Concentrator) behind the evacuated tubes helps to increase their efficiency. This reflector directs the incident light rays to the absorber.

5 2

1

6

7

3

4

Technical data CPC Allstar Evacuated tube collector

CPC 32 Allstar

CPC 40 Allstar

Number of evacuated tubes

16

20

%

64.4

64.4

a1 with wind in relation to aperture

W/(m ·K )

0.749

0.749

a2 with wind in relation to aperture

W/(m ·K )

0.005

0.005

Collector yield (location Würzburg, reference surface area 5 m2)

kWh/(m2·K2)

602

602

η0 in relation to the aperture surface, EN 12975

2

2

2

Grid dimensions (length x width x height)

m

1.90 x 1.85 x 0.10

1.90 x 2.31 x 0.10

Gross surface area

m2

3.52

4.37

Collector aperture surface

m

2

3.20

4.00

I

2.4

2.9

mbar

311

389

kg

53

66

Operating overpressure, max. permissible

bar

10

10

Flow/return, compression ring fitting for

mm

Cu 12

Cu 12

aluminium grey

aluminium grey

black

black

2

3

Collector capacity Pressure loss at 2.0 l/min. and 40 °C, ca. Weight, approx.

Colour, Eloxal Colour of all plastic parts Number of bearing rails for angle frame

18

2

Certification and environmental aspects - Certified as CE 0036 by German certification body TÜV Süddeutschland and tested according to the applicable European standards for solar collectors - Hail resistance according to EN 12975 confirmed by TÜV Rheinland - 10 year free replacement of tubes in case of glass breakage as the result of hail or frost damage - Awarded the Solar KEYMARK and the “DIN-Geprüft” (DIN tested) mark Heat transfer unit CPC Star azzurro

Evacuated tube design

Manifold pipe

CPC reflector

U-pipe

Evacuated tube

Evacuated tube

Absorber layer Heat transfer plate Stainless steel pipe

CPC reflector

Heat transfer plate

Technical data CPC Star azzurro Evacuated tube collector

CPC 14 Star azzurro

CPC 21 Star azzurro

CPC 30 Star azzurro

CPC 45 Star azzurro

Number of evacuated tubes

14

21

14

21

η0 in relation to the aperture surface, EN 12975 %

64.4

64.4

64.4

64.4

a1 with wind in relation to aperture

W/(m ·K )

0.749

0.749

0.749

0.749

a2 with wind in relation to aperture

W/(m ·K )

0.005

0.005

0.005

0.005

602

602

602

602

m

1.61 x 1.62 x 0.12

1.61 x 2.42 x 0.12

2.03 x 1.62 x 0.12

2.03 x 2.42 x 0.12

Gross surface area

m2

2.61

3.91

3.29

4.91

Collector aperture surface

m

2

2.33

3.5

3.0

4.5

I

2.3

3.4

2.7

4.1

4

10

7

16

kg

42

62

52

76

Operating overpressure, max. permissible

bar

10

10

10

10

Flow/return, compression ring fitting for

mm

Cu 15

Cu 15

Cu 15

Cu 15

aluminium grey

aluminium grey

aluminium grey

aluminium grey

cobalt blue

cobalt blue

cobalt blue

cobalt blue

2

3

2

3

2

2

2

2

Collector yield (location Würzburg, Reference surface area 5 m2)

kWh/(m2·K2)

Grid dimensions (length x width x height)

Collector capacity Pressure loss at 0.25 l/min and 40 °C, ca. Weight, approx.

Colour, Eloxal Colour of all plastic parts Number of bearing rails for angle frame

mbar

19

Aqua solar storage tank for the rapid heating of drinking water

Technical data Fresh water storage tank

Aqua 190

Aqua 290

Aqua 390

Aqua 490

Height/diameter with insulation

mm

1210/680

1413/790

1723/790

1915/790

Permissible operating pressure

bar

10

10

10

10

°C

95

95

95

95

mm

80

95

95

95

Permissible operating temperature EPS insulation with air gap Nominal storage tank capacity

l

190

316

410

470

Boiler backup heating volume

l

190

120

150

165

kWh/d

1.4

1.6

2

2.2

m2

1.5

2.2

2.4

2.6

l

9

14

16

17

10 minute peak withdrawal quantity

l

256

364

461

519

60 minute continuous withdrawal quantity

l

640

745

839

899

Standby losses *

)

Technical data heat exchanger Total surface area Total capacity Excerpt from performance data

1)

*) As specified in German standard DIN 4701-10, not including the losses of connected pipes. These specifications are subject to change in respect of tolerances and technical modifications which the manufacturer reserves the right to make without notice. For boiler output of 20 kW at 50 °C withdrawal temperature and full tank. Performance data for other operating conditions and boiler output values can be found in the Paradigma design handbook.

OPTIMA Aqua

TITAN Aqua

Aqua solar storage tank

1)

20

Combined and fresh water storage tank TITAN Aqua and OPTIMA Aqua

Technical data – TITAN Aqua Combined storage tank

TITAN Aqua 400

TITAN Aqua 600

TITAN Aqua 850

Height/diameter with insulation

mm

1520/850

1820/950

1980/1000

Permissible operating overpressure

bar

2 (3) *

2 (3) *

2 (3) *)

EPS insulation with air gap (cladding/cover)

mm

100/150

100/150

100/170

Buffer capacity (incl. heat exchangers and hot water storage tank) l

385

642

836

Permissible tank temperature

°C

110

110

110

kWh/d

1.8

2.4

2.8

bar

8

8

8

m2

approx. 1.8

approx. 2.5

approx. 2.7

l

120

150

230

°C

95

95

95

10 minute peak withdrawal quantity

l

162

196

288

60 minute continuous withdrawal quantity

l

531

566

658

Standby losses **

)

)

)

Domestic water heat exchanger Permissible operating overpressure Surface area Capacity of hot water heat ex. or hot water tank Permissible hot water temperature Excerpt from performance data

1)

*) Maximum 2 bar for empty or depressurised inner tank, otherwise 3 bar. **) According to German standard DIN 4701-10, not including the losses of connected pipes. These specifications are subject to change in respect of tolerances and technical modifications which the manufacturer reserves the right to make without notice. 1)

At 65°C tank temperature, hot water tap temperature of 45 °C and boiler output of 20 kW. The solar energy system is not taken into account. Performance data for other operating conditions and boiler output values can be found in the Paradigma design handbook.

Technical data – OPTIMA Aqua Fresh water storage tank

OPTIMA Aqua 500

OPTIMA Aqua 800 OPTIMA Aqua 1000

Height/diameter with insulation

mm

1790/950

1980/1050

2070/1100

Permissible operating overpressure

bar

3

3

3

EPS insulation side/cover/base

mm

120/150/50

120/150/50

120/150/50

550

830

990

°C

90

90

90

kWh/d

2

2.3

2.6

bar

8

8

8

m2

3.9

4.8

7.5

5

10

12

Withdrawal quantity (l) without reheating of boiler/withdrawal rate l/min

200/15

280/15

450/25

Withdrawal quantity (l) with reheating of boiler/withdrawal rate

240/15

340/15

520/25

Total capacity (incl. heat exchanger) Permissible tank temperature Standby losses *

)

l

Domestic water heat exchanger Permissible operating overpressure Surface area Capacity Excerpt from performance data

* 1)

)

l 1)

l/min

As specified in German standard DIN 4701-10, not including the losses of connected pipes. These specifications are subject to change in respect of tolerances and technical modifications which the manufacturer reserves the right to make without notice. Performance data for other operating conditions and boiler output values can be found in the Paradigma design handbook.

21

AquaPackage Deals Summary of available package deals

AquaPackage Deals

CPC Allstar

CPC Star azzurro

CPC/TITAN

CPC/OPTIMA

hot water heating (+ heating support)

hot water heating + partial solar heating

hot water heating + partial solar heating

hot water heating + partial solar heating

upgrade packages (6), complete packages (6)

upgrade packages (15), complete packages (15)

complete packages (12)

complete packages (12)

2 – 4 persons

2 – 8 persons

2 – 8 persons

2 – 8 persons

water

water

water

water

-

direct feeding with tuning kit

return-flow boost, buffer principle

buffer principle

CPC 32/40 Allstar

CPC 14/21/30/45 Star azzurro

CPC 21/45 Star azzurro

CPC 21/45 Star azzurro

1

1 – 2 (3)

2–3

2–3

Aperture surface area [m2]

3.2 / 4.0

3.5 / 4.5 / 4.7 / 6.0 / 7.0 extendible

7.0 / 9.0 / 10.5 / 13.5

7.0 / 9.0 / 10.5 / 13.5

Dimensioning aperture surface area [m2]

WW = No.of people + 1

WW = No.of people + 1 HU = 1.5 x No.of people + 1

TSH = 2 x No.of people + 1

TSH = 2 x No.of people + 1

Installation

on-roof/flat roof/wall

on-roof/flat roof/wall

on-roof/flat roof/wall

on-roof/flat roof/wall

Storage tank

Aqua 190 (optional)

Aqua 290/390/490 (optional)

TITAN Aqua 400/600/850

OPTIMA Aqua 500/800/1000

190 l

316 l / 410 l / 470 l

385 l / 642 l / 836 l

550 l / 830 l / 990 l

≥ 40 l/m2

≥ 40 l/m2

approx. 60 l/m2

approx. 80 l/m2

STAqua

STAqua

STAqua

STAqua

SystaSolar Aqua

SystaSolar Aqua

SystaSolar Aqua

SystaSolar Aqua

-

tuning kit heating extension kit CPC

heating controller SystaComfort as wall solution / boiler with controller SystaComfort

heating controller SystaComfort as wall solution / boiler with controller SystaComfort

solar pipework SPEED Cu 12 or solar corrugated pipe SPEED DN 10

solar pipework SPEED Cu 12 / Cu 15 or solar corrugated pipe SPEED DN 12 / DN 16

solar pipework SPEED Cu 12 / Cu 15 or solar corrugated pipe SPEED DN 12 / DN 16

solar pipework SPEED Cu 12 / Cu 15 or solar corrugated pipe SPEED DN 12 / DN 16

Application Package types (quantity) Number of persons Heat transfer medium Heating connection CPC collector No. of modules

Capacity Tank capacity [l/m2] Solar station Solar controller Extension

Not supplied, however required

Hydraulic example

WW = Aperture surface for hot water heating, HU = Aperture surface for hot water heating and heating support, TSH = Aperture surface for hot water heating and partial solar heating.

22

Solar controller and station Solar controller SystaSolar, SystaSolar Aqua and single-string solar station STAqua

SystaSolar and SystaSolar Aqua solar controller Whether you are using a conventional solar energy system or the innovative AquaPackage Deals: The SystaSolar and SystaSolar Aqua solar controllers ensure the safe operation and high efficiency of your solar energy system: - Feed-in function for power-saving solar pump operation - Extensive functional checks with optical and acoustic signalling of potential malfunctions - Determining the solar power and yield - Easy to operate with 6 large buttons and plain text menu - Illuminated, easy-to-read display - Solar yield and potential malfunctions of the solar energy system displayed on the operating unit of the heating controller

Single-string solar station STAqua The Paradigma STAqua solar station is fast and easy to assemble and provides a high degree of functional reliability due to: - Precision-engineered multifunctional components - Low number of seals and joints - High quality sealing materials - Safety valve certified as “Solar” - Extremely reliable connections using 15 mm or 12 mm metal compression ring fittings - Low heat loss by using a compact, encapsulated insulation shell made from water vapour expanded polypropylene (EPP) - Powerful solar pump with high head height

Technical data – SystaSolar Aqua

Technical data – Solar station Aqua

Outer dimensions (H x W x D)

Outer dimensions (H x W x D)

Ambient temperature Switching capacity of outputs Power consumption Protection degree Protection class Test for Power reserve of clock Sensor cable

130 x 153 x 49 mm 0 °C to 50 °C 230 V 1 A 2.5 VA IP 40 according to EN 60529-1 II according to EN 60730-1 CE conformity

Fuse

4.4 kg

Total capacity

0.04 l

Max. constant operating temperature

110 °C

Safety valve Distance from wall to centre of pipe Flow/return connection

max. 30 m, 2 * 0.75 mm2 microfuse 3.15 AT

1/2”, 4 bar, “Solar” 58 mm Cu 15 mm compression fitting/ Cu 12 mm compression fitting

Pump Grundfos UPS 15-60 Solar Total length of pump

Connection heating controller and solar controller total length of bus

Weight

10 years max. 130 m, 2 * 0.75 mm2

328 x 200 x 178 mm

Pump connections Flow meter

Pressure gauge

230 V, 50 Hz 130 mm 1” 0.5 – 7 l/min.

0 – 10 bar

23